China is quite poor in argent resource. Roughly 80% of this industrial argent is imported every year. In order to improve the situation, we took advantage of rare earth (RE) mineral resource and successfully developed...China is quite poor in argent resource. Roughly 80% of this industrial argent is imported every year. In order to improve the situation, we took advantage of rare earth (RE) mineral resource and successfully developed the non-argent Lanthanum-tellurium-copper alloy as a substitute for industry argent-copper. In our research, we were able to successfully apply rare earth lanthanum to copper alloy. The defects as porosity, inclusion, etc. originating from nonvacuum melting processing were controlled. Fine grain was obtained. Meanwhile, the comprehensive properties of the copper alloy, such as strength, conductivity and thermal conductivity were improved. The research results in increasing conductivity and thermal conductivity by 5% and 15%, respectively, while the tensile strength is increased by 6% higher than Ag-Cu alloy. The anti-electric corrosion property is good, and there is no argent-cadmium steam population originating from the electric arc effect. The addition of lanthanum further reduces the content of oxygen and hydrogen. The optimum quantity of the addition of RE lanthanum in the copper alloy is 0.010% - 0.020% .展开更多
Chromite,a crucial high-conductivity mineral phase of peridotite in ophiolite suites,has a significant effect on the electrical structure of subduction zones.The electrical conductivities of sintered polycrystalline o...Chromite,a crucial high-conductivity mineral phase of peridotite in ophiolite suites,has a significant effect on the electrical structure of subduction zones.The electrical conductivities of sintered polycrystalline olivine containing various volume percents of chromite(0,4,7,10,13,16,18,21,23,100 vol.%)were measured using a complex impedance spectroscopic technique in the frequency range of 10^(−1)-10^(6) Hz under the conditions of 1.0-3.0 GPa and 873-1223 K.The relationship between the conductivities of the chromite-bearing olivine aggregates and temperatures conformed to the Arrhenius equation.The positive effect of pressure on the conductivities of the olivine-chromite systems was much weaker than that of temperature.The chromite content had an important effect on the conductivities of the olivine-chromite systems,and the bulk conductivities increased with increasing volume fraction of chromite to a certain extent.The inclusion of 16 vol.%chromites dramatically enhanced the bulk conductivity,implying that the percolation threshold of interconnectivity of chromite in the olivine-chromite systems is-16 vol.%.The fitted activation enthalpies for pure polycrystalline olivine,polycrystalline olivine with isolated chromite,polycrystalline olivine with interconnected chromites,and pure polycrystalline chromite were 1.25,0.78-0.87,0.48-0.54,and 0.47 eV,respectively.Based on the chemical compositions and activation enthalpies,small polaron conduction was proposed to be the dominant conduction mechanism for polycrystalline olivine with various chromite contents.Furthermore,the conductivities of polycrystalline olivine with interconnected chromite(10-1.5-100.5 S/m)provides a reasonable explanation for the high conductivity anomalies in subduction-related tectonic environments.展开更多
The subduction of the Indian continental lithosphere under the Asian continent caused the uplift of the Tibet Plateau,resulting in the formation of a thickened continental crust twice of the normal value and the crust...The subduction of the Indian continental lithosphere under the Asian continent caused the uplift of the Tibet Plateau,resulting in the formation of a thickened continental crust twice of the normal value and the crustal shortening of at least 1500 km.Therefore,many models have been proposed to explain the shortening and material transportation mechanism of the Tibetan Plateau.展开更多
Although electrohydraulic discharge is effective for wastewater treatment,its application is restricted by water conductivity and limited to the treatment of low conductivity water. For high conductivity water treatme...Although electrohydraulic discharge is effective for wastewater treatment,its application is restricted by water conductivity and limited to the treatment of low conductivity water. For high conductivity water treatment,water-surface discharge is the preferred choice.However. the metallic electrodes are easily corroded because of the high temperature and strong oxidative environment caused by gas phase discharge and the electrochemical reaction in water.As a result. the efficiency of the water treatment might be affected and the service life of the reactor might be shortened.In order to avoid the corrosion problem,nonmetallic electrode water-surface discharge is introduced into high conductivity water treatment in the present study.Carbon-felt and water were used as the high voltage electrode and ground electrode,respectively.A comparison of the electrical and chemical characteristics showed that nonmetallic electrode discharge maintained the discharge characteristics and enhanced the energy efficiency,and furthermore,the corrosion of metal electrodes was avoided.展开更多
Silica-based anode is widely employed for high energy density Li-ion batteries owing to their high theoretical specific capacity(4200 m A h g-1).However,it is always accompanied by a huge volume expansion(300%)and shr...Silica-based anode is widely employed for high energy density Li-ion batteries owing to their high theoretical specific capacity(4200 m A h g-1).However,it is always accompanied by a huge volume expansion(300%)and shrinks during the lithiation/delithiation process,further leading to low cycle stability.Efforts to mitigate the adverse effects caused by volume expansion such as robust binder matrix,Coreshell structure,etc.,inevitably affect the electronic conductivity within the electrode.Herein,a high conductivity and elasticity Si anode(Ni-P-SBR(styrene-butadiene rubber)@Si)was designed and fabricated via the Ni-P-SBR composite-electroless-plating process.In this design,the Si particles are surrounded by SBR polymer and Ni particles,where the SBR can adapt to the volume change and Ni particles can provide the electrode with high electronic conductivity.Therefore,the Ni-P-SBR@Si delivers a high initial capacity of 3470 m A h g-1and presents capacity retention of 49.4%within 200 cycles at 600 m A g-1.Additionally,a high capacity of 1153 m A h g-1can be achieved at 2000 m A g-1and can be cycled stably under bending conditions.This strategy provides feasible ideas to solve the key issues that limit the practical application of Si anodes.展开更多
Because of the large coefficient of thermal expansion (CTE) (23 ppm K^(–1)), aluminum faces challenges in meeting the demands of high dimensional stability in precision instruments, microelectronics, and aerospace. F...Because of the large coefficient of thermal expansion (CTE) (23 ppm K^(–1)), aluminum faces challenges in meeting the demands of high dimensional stability in precision instruments, microelectronics, and aerospace. Filling negative thermal expansion (NTE) particles into aluminum can create composites with either zero or low CTEs. However, the resulting composites usually have poor thermal conductivity due to their monolithic configuration, i.e., the NTE particles are filled randomly. Thus, heat sinks should be equipped to assist their usage (e.g., in thermal management). This in turn causes strong thermal stress in the packaging system owing to the high contrast in the CTEs between those monolithic composites and heat sinks typically made of copper or aluminum. Here, we propose a gradient configuration for low-CTE aluminum composite, inspired by the bamboo structure. The gradient distribution of NTE particles (Zn_(0.5)Sn_(0.3)Mn_(0.2)NMn_(3), ZSM) was obtained by laying up several layers of ZSM/Al with the ZSM fraction ranging from 0 to 28 vol.%. In the gradient composite, the CTE near room temperature varies from 3.4 pm K^(–1) on one side to 21 ppm K^(–1) on the other side. Such a gradient CTE distribution would facilitate the low-thermal-stress designs and thus help stabilize the dimension of a precision system. Furthermore, this composite has a high thermal conductivity of 130 W m^(–1) K^(–1) and strong toughness when the flexural loading is applied on the 28 vol.% ZSM/Al side. Our research provides a novel approach to designing metallic matrix composites with unprecedented performance.展开更多
The investigation of thermal transport properties of materials has become increasingly important in technological applications,including thermal management and energy conversion.Recently,ultrahigh or low thermal condu...The investigation of thermal transport properties of materials has become increasingly important in technological applications,including thermal management and energy conversion.Recently,ultrahigh or low thermal conductivity has been reported in nitride,boride,and chalcogenide by different strategies.However,the strategy to design oxide crystals with unique thermal properties is also a challenge.In this work,a new ternary oxide crystal Ga_(2)TeO_(6) is designed and expected to show high thermal conductivity due to its lone pairs-free octahedra connected along the caxis by sharing edges.The thermal conductivities of Ga_(2)TeO_(6) crystal are determined to be 19.2 and 23.9Wm^(-1) K^(-1) along the a-and c-axis directions at 323 K,respectively,which are significantly higher than those of most reported oxide crystals.First-principles calculations and crystal structure analyses reveal that the Ga_(2)TeO_(6) crystal shows high sound velocity and weak lattice anharmonicity due to lone pairs-free octahedra and highly symmetric group arrangement.The results suggest that much attention must be paid to the polyhedron with lone pairs and its arrangement in materials design to balance the functions and thermal properties.展开更多
A new Cu-Cr-Sc alloy was designed,prepared and subjected to deformation heat treatment.Transmission electron microscopy(TEM),electron backscatter diffraction(EBSD)and X-ray diffraction(XRD)were employed to investigate...A new Cu-Cr-Sc alloy was designed,prepared and subjected to deformation heat treatment.Transmission electron microscopy(TEM),electron backscatter diffraction(EBSD)and X-ray diffraction(XRD)were employed to investigate the effects of Sc on the microstructural changes in the Cu-Cr alloy in different states,examine the changes in the precipitates during aging,reveal the intrinsic correlation between the structure and property in the peak aging state,and evaluate the Sc distribution in the Cu-Cr alloy.The addition of Sc significantly increased the yield strength of the Cu-Cr alloy by~24.6%after aging at 480℃for 1 h,while it had a high electrical conductivity of81.5%international annealed copper standard(IACS).This enhancement was attributed to the effective inhibition of Cr phase coarsening and recrystallization through the addition of Sc,which strengthened the alloy.Furthermore,in the Cu-Cr-Sc alloy,most of the Sc atoms precipitated as the Cu_(4)Sc phase,with a small amount of Sc segregating at the grain boundaries to pin them.This grain boundary pinning helped to inhibit grain growth and further improve the strength.The main strengthening mechanisms identified in Cu-Cr-Sc alloys were dislocation strengthening and precipitation strengthening.展开更多
Anode active materials involving transition metal oxides and sulfides are of great significance for high energy density lithium-ion batteries(LIBs),but the huge volume expansion and inferior electronic conductivity up...Anode active materials involving transition metal oxides and sulfides are of great significance for high energy density lithium-ion batteries(LIBs),but the huge volume expansion and inferior electronic conductivity upon cycling critically constrain their further application.Herein,from a new perspective,a highly conductive and stable 3D flexible composite current collector is rationally designed by facilely electrodepositing metallic Ni thin layer onto the carbon cloth(CC/Ni),which endows the supported active materials with exceptional electronic conductivity and structural stability.In addition,the homogeneously distributed metallic Ni protrusions external CC can strongly bond with the active components,ensuring the structural integrity of electrodes upon cycling.More importantly,the 3D network structure with large specific surface area provides abundant space to alleviate the volume expansion and more active sites for electrochemical reactions.Therefore,taking Ni_(3)S_(2)nanosheet(Ni_(3)S_(2)NS)anode as an example,the prepared Ni_(3)S_(2)NS@CC/Ni electrode shows a high specific capacity of 2.32 mAh/cm^(2)at 1mA/cm^(2)and high capacity retention of 1.68 mAh/cm^(2)at a high rate of 8mA/cm^(2).This study provides a universal approach to obtain highly conductive and stable 3D flexible current collectors towards high performance metal-ion batteries beyond LIBs.展开更多
High-performance Ti_(3)C_(2)T_(x)fibers have garnered significant potential for smart fibers enabled fabrics.Nonetheless,a major challenge hindering their widespread use is the lack of strong interlayer interactions b...High-performance Ti_(3)C_(2)T_(x)fibers have garnered significant potential for smart fibers enabled fabrics.Nonetheless,a major challenge hindering their widespread use is the lack of strong interlayer interactions between Ti_(3)C_(2)T_(x)nanosheets within fibers,which restricts their properties.Herein,a versatile strategy is proposed to construct wet-spun Ti_(3)C_(2)T_(x)fibers,in which trace amounts of borate form strong interlayer crosslinking between Ti_(3)C_(2)T_(x)nanosheets to significantly enhance interactions as supported by density functional theory calculations,thereby reducing interlayer spacing,diminishing microscopic voids and promoting orientation of the nanosheets.The resultant Ti_(3)C_(2)T_(x)fibers exhibit exceptional electrical conductivity of 7781 S cm^(-1)and mechanical properties,including tensile strength of 188.72 MPa and Young's modulus of 52.42 GPa.Notably,employing equilibrium molecular dynamics simulations,finite element analysis,and cross-wire geometry method,it is revealed that such crosslinking also effectively lowers interfacial thermal resistance and ultimately elevates thermal conductivity of Ti_(3)C_(2)T_(x)fibers to 13 W m^(-1)K^(-1),marking the first systematic study on thermal conductivity of Ti_(3)C_(2)T_(x)fibers.The simple and efficient interlayer crosslinking enhancement strategy not only enables the construction of thermal conductivity Ti_(3)C_(2)T_(x)fibers with high electrical conductivity for smart textiles,but also offers a scalable approach for assembling other nanomaterials into multifunctional fibers.展开更多
High strength and high conductivity(HSHC) Cu alloys are widely used in many fields,such as high-speed electric railway contact wires and integrated circuit lead frames. Pure Cu is well known to have excellent electric...High strength and high conductivity(HSHC) Cu alloys are widely used in many fields,such as high-speed electric railway contact wires and integrated circuit lead frames. Pure Cu is well known to have excellent electrical conductivity but rather low strength. The main concern of HSHC Cu alloys is how to strengthen the alloy efficiently. However,when the Cu alloys are strengthened by a certain method,their electrical conductivity will inevitably decrease to a certain extent. This review introduces the strengthening methods of HSHC Cu alloys. Then the research progress of some typical HSHC Cu alloys such as Cu-Cr-Zr,Cu-Ni-Si,Cu-Ag,Cu-Mg is reviewed according to different alloy systems. Finally,the development trend of HSHC Cu alloys is forecasted. It is pointed out that precipitation and micro-alloying are effective ways to improve the performance of HSHC Cu alloys. At the same time,the production of HSHC Cu alloys also needs to comply with the large-scale,low-cost development trend of industrialization in the future.展开更多
A novel solid polymer electrolyte with comb-like structure is prepared via a solvent-free UV-cured method.The relationship between conductivity and molecular weight is investigated and revealed.The optimal electrolyte...A novel solid polymer electrolyte with comb-like structure is prepared via a solvent-free UV-cured method.The relationship between conductivity and molecular weight is investigated and revealed.The optimal electrolyte presents a considerably high conductivity of 1.44·10^(-4)S·cm^(-1)at 30℃.Meanwhile,it shows excellent compatibility with metallic lithium and wide electrochemical window(>5 V).To investigate the safety and cycling performance,the coin cell and soft package battery are assembled respectively.The LiFePO_(4)/Li coin cells exhibit initial discharge specific capacities of 163.2,147.7,137.3 and 108.7 mA·h·g^(-1)at 0.1,0.2,0.5 and 1C under 60℃,respectively.Notably,when the coin cells work at 30℃,the initial discharge specific capacities at 0.05,0.1,0.2 and 0.5C are 140.5,133.5,107.7 and 55.6 mA·h·g^(-1).Significantly,a 3.5 cm×7 cm solid-state soft pack battery is fabricated and cycling at 30℃.The first discharge capacity reaches to 137.5 mA·h·g^(-1)and the capacity retention is as high as 84.4%after 100 cycles at 0.2C and remain 95.5%after 100 cycles at 0.5C,respectively.These results shows a promising solid polymer electrolyte for solid-state batteries with good cycling and safety performance.展开更多
A dual-scale hybrid HfB_(2)/Cu-Hf composite with HfB_(2) microparticles and Cu_(5) Hf nanoprecipitates was designed and prepared.The contribution of the hybrid effect to the mechanical properties and high-temperature ...A dual-scale hybrid HfB_(2)/Cu-Hf composite with HfB_(2) microparticles and Cu_(5) Hf nanoprecipitates was designed and prepared.The contribution of the hybrid effect to the mechanical properties and high-temperature performances was studied from macro and micro perspectives,respectively.The hybrid of dual-scale particles can make the strain distribution of the composite at the early deformation stage more uniform and delay the strain concentration caused by the HfB_(2) particle.The dislocation pinning of HfB_(2) particles and the coherent strengthening of Cu_(5) Hf nanoprecipitates simultaneously play a strengthening role,but the strength of the hybrid composite is not a simple superposition of two strengthening mod-els.In addition,both Cu_(5) Hf nanoprecipitates and HfB_(2) microparticles contribute to the high-temperature performance of the composite,the growth and phase transition of nanoprecipitates at high temperature will reduce their contribution to strength,while the stable HfB_(2) particles can inhibit the coarsening of matrix grains and maintain the high-density geometrically necessary dislocations(GNDs)in the matrix,which ensures more excellent high-temperature resistance of the hybrid composite.As a result,the hy-brid structure can simultaneously possess the advantages of multiple reinforcements and make up for the shortcomings of each other.Finally,a copper matrix composite with high strength,high conductivity,and excellent high-temperature performance is displayed.展开更多
High-thermal-conductivity silicon nitride ceramic substrates are indispensable components for nextgeneration high-power electronic devices because of their excellent mechanical properties and high thermal conductiviti...High-thermal-conductivity silicon nitride ceramic substrates are indispensable components for nextgeneration high-power electronic devices because of their excellent mechanical properties and high thermal conductivities, which make them suitable for applications in complex and extreme environments. Here, we present an overview of the recent developments in the preparation of high-thermal-conductivity silicon nitride ceramics. First,the factors affecting the thermal conductivity of silicon nitride ceramics are described. These include lattice oxygen and grain boundary phases, as well the oxygen content of the crystal lattice, which is the main influencing factor.Then, the methods to prepare high-thermal-conductivity silicon nitride ceramics are presented. Recent work on the preparation of high-thermal-conductivity silicon nitride is described in detail, including the raw materials used and the forming and sintering processes. Although great progress has been made, the development of a high-quality,low-cost fabrication process remains a challenge. Nevertheless, we believe that high-thermal-conductivity silicon nitride substrates are promising for massive practical applications in the next generation of high-power electronic devices.展开更多
Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for building solid-state lithium batteries due to their excellent flexibility,scalability,and interfacial compatibility with electro...Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for building solid-state lithium batteries due to their excellent flexibility,scalability,and interfacial compatibility with electrodes.However,the low ionic conductivity and poor cyclic stability of SPEs do not meet the requirements for practical applications of lithium batteries.Here,a novel polymer dispersed ionic liquid-based solid polymer electrolyte(PDIL-SPE)is fabricated using the in situ polymerization-induced phase separation(PIPS)method.The as-prepared PDIL-SPE possesses both outstanding ionic conductivity(0.74 mS cm^(-1) at 25℃)and a wide electrochemical window(up to 4.86 V),and the formed unique three-dimensional(3D)co-continuous structure of polymer matrix and ionic liquid in PDIL-SPE can promote the transport of lithium ions.Also,the 3D co-continuous structure of PDIL-SPE effectively accommodates the severe volume expansion for prolonged lithium plating and stripping processes over 1000 h at 0.5 mA cm^(-2) under 25℃.Moreover,the LiFePO_(4)//Li coin cell can work stably over 150 cycles at a 1 C rate under room temperature with a capacity retention of 90.6%from 111.1 to 100.7 mAh g^(-1).The PDIL-SPE composite is a promising material system for enabling the ultrastable operation of solid-state lithium-metal batteries.展开更多
A rapid method to determine glutamic acid (Glu) in cerebrospinal fluid (CSF) by capillaryelectrophoresis with high frequency conductivity detection (contactless conductivity detection) wasdescribed. The CSF sample was...A rapid method to determine glutamic acid (Glu) in cerebrospinal fluid (CSF) by capillaryelectrophoresis with high frequency conductivity detection (contactless conductivity detection) wasdescribed. The CSF sample was pretreated with silver cation resin to remove high concentration ofCl- ions in CSF. The separation was achieved in the buffer solution of 10 mmol/L Tris and 8mmol/L boric acid at the separation voltage of 20.0 kV. Glu showed linear response in the range of5.0×10-6 to 6.0×10-3 mol/L, the limit of detection was 1.0×10-6 mol/L. The method was used foranalysis Glu in CSF satisfactorily with a recovery of 97.8-98.8%.展开更多
Using a walnut shellas a carbon source and ZnCl_2 as an activating agent,we resolved the temperature gradient problems of activated carbon in the microwave desorption process.An appropriate amount of silicon carbide w...Using a walnut shellas a carbon source and ZnCl_2 as an activating agent,we resolved the temperature gradient problems of activated carbon in the microwave desorption process.An appropriate amount of silicon carbide was added to prepare the composite activated carbon with high thermalconductivity while developing VOC adsorption-microwave regeneration technology.The experimentalresults show that the coefficient of thermalconductivity of SiC-AC is three times as much as those of AC and SY-6.When microwave power was 480 W in its microwave desorption,the temperature of the bed thermaldesorption was 10 ℃ to 30 ℃ below that of normalactivated carbon prepared in our laboratory.The toluene desorption activation energy was 16.05 k J·mol^（-1）,which was 15% less than the desorption activation energy of commercialactivated carbon.This study testified that the process could maintain its high adsorption and regeneration desorption performances.展开更多
Highly thermally conductive graphitic film(GF)materials have become a competitive solution for the thermal management of high-power electronic devices.However,their catastrophic structural failure under extreme altern...Highly thermally conductive graphitic film(GF)materials have become a competitive solution for the thermal management of high-power electronic devices.However,their catastrophic structural failure under extreme alternating thermal/cold shock poses a significant challenge to reliability and safety.Here,we present the first investigation into the structural failure mechanism of GF during cyclic liquid nitrogen shocks(LNS),which reveals a bubbling process characterized by“permeation-diffusion-deformation”phenomenon.To overcome this long-standing structural weakness,a novel metal-nanoarmor strategy is proposed to construct a Cu-modified graphitic film(GF@Cu)with seamless heterointerface.This well-designed interface ensures superior structural stability for GF@Cu after hundreds of LNS cycles from 77 to 300 K.Moreover,GF@Cu maintains high thermal conductivity up to 1088 W m^(−1)K^(−1)with degradation of less than 5%even after 150 LNS cycles,superior to that of pure GF(50%degradation).Our work not only offers an opportunity to improve the robustness of graphitic films by the rational structural design but also facilitates the applications of thermally conductive carbon-based materials for future extreme thermal management in complex aerospace electronics.展开更多
Extending the ionic conductivity is the pre-requisite of electrolytes in fuel cell technology for high-electrochemical performance.In this regard,the introduction of semiconductor-oxide materials and the approach of h...Extending the ionic conductivity is the pre-requisite of electrolytes in fuel cell technology for high-electrochemical performance.In this regard,the introduction of semiconductor-oxide materials and the approach of heterostructure formation by modulating energy bands to enhance ionic conduction acting as an electrolyte in fuel cell-device.Semiconductor(n-type;SnO_(2))plays a key role by introducing into p-type SrFe_(0.2)Ti_(0.8)O_(3-δ)(SFT)semiconductor perovskite materials to construct p-n heterojunction for high ionic conductivity.Therefore,two different composites of SFT and SnO_(2)are constructed by gluing p-and n-type SFT-SnO_(2),where the optimal composition of SFT-SnO_(2)(6∶4)heterostructure electrolyte-based fuel cell achieved excellent ionic conductivity 0.24 S cm^(-1)with power-output of 1004 mW cm^(-2)and high OCV 1.12 V at a low operational temperature of 500℃.The high power-output and significant ionic conductivity with durable operation of 54 h are accredited to SFT-SnO_(2)heterojunction formation including interfacial conduction assisted by a built-in electric field in fuel cell device.Moreover,the fuel conversion efficiency and considerable Faradaic efficiency reveal the compatibility of SFT-SnO_(2)heterostructure electrolyte and ruled-out short-circuiting issue.Further,the first principle calculation provides sufficient information on structure optimization and energy-band structure modulation of SFT-SnO_(2).This strategy will provide new insight into semiconductor-based fuel cell technology to design novel electrolytes.展开更多
High thermal conductivity dense silica bricks have the higher thermal conductivity than ordinary silica bricks,which is conducive to the realization of energy saving and emission reduction in the iron and steel indust...High thermal conductivity dense silica bricks have the higher thermal conductivity than ordinary silica bricks,which is conducive to the realization of energy saving and emission reduction in the iron and steel industry.The performance of ordinary silica bricks and high thermal conductivity dense silica bricks was compared,and the high thermal conductivity mechanism was analyzed.The results show that(1)compared with ordinary silica bricks,high thermal conductivity dense silica bricks have the characteristics of higher thermal conductivity,lower apparent porosity,higher tridymite content,higher compressive strength,and higher thermal expansion;(2)by increasing the tridymite content and reducing the porosity,the close packing of honeycombα-tridymite improves the density and continuity of the SiO_(2)frame structure of the silica bricks,and the larger area perpendicular to the heat transfer direction improves the thermal conductivity of the bricks;(3)the densification of the silica bricks also increases the thermal expansion of the bricks,but they still meet the standard requirements.展开更多
基金Project supported by the National Scientific and Technological Achievements Spread Project (2004EC00299)Science and Technology Type Middle and Small Business Technique Invention Fund (04C26225121390)
文摘China is quite poor in argent resource. Roughly 80% of this industrial argent is imported every year. In order to improve the situation, we took advantage of rare earth (RE) mineral resource and successfully developed the non-argent Lanthanum-tellurium-copper alloy as a substitute for industry argent-copper. In our research, we were able to successfully apply rare earth lanthanum to copper alloy. The defects as porosity, inclusion, etc. originating from nonvacuum melting processing were controlled. Fine grain was obtained. Meanwhile, the comprehensive properties of the copper alloy, such as strength, conductivity and thermal conductivity were improved. The research results in increasing conductivity and thermal conductivity by 5% and 15%, respectively, while the tensile strength is increased by 6% higher than Ag-Cu alloy. The anti-electric corrosion property is good, and there is no argent-cadmium steam population originating from the electric arc effect. The addition of lanthanum further reduces the content of oxygen and hydrogen. The optimum quantity of the addition of RE lanthanum in the copper alloy is 0.010% - 0.020% .
基金supported by NSF of China(Grant Nos.42072055,41774099 and 41772042)Youth Innovation Promotion Association of CAS(Grant No.2019390)Special Fund of the West Light Foundation of CAS and well as Special Fund from Shandong Provincial Key Laboratory of Water and Soil Conservation and Environmental Protection.
文摘Chromite,a crucial high-conductivity mineral phase of peridotite in ophiolite suites,has a significant effect on the electrical structure of subduction zones.The electrical conductivities of sintered polycrystalline olivine containing various volume percents of chromite(0,4,7,10,13,16,18,21,23,100 vol.%)were measured using a complex impedance spectroscopic technique in the frequency range of 10^(−1)-10^(6) Hz under the conditions of 1.0-3.0 GPa and 873-1223 K.The relationship between the conductivities of the chromite-bearing olivine aggregates and temperatures conformed to the Arrhenius equation.The positive effect of pressure on the conductivities of the olivine-chromite systems was much weaker than that of temperature.The chromite content had an important effect on the conductivities of the olivine-chromite systems,and the bulk conductivities increased with increasing volume fraction of chromite to a certain extent.The inclusion of 16 vol.%chromites dramatically enhanced the bulk conductivity,implying that the percolation threshold of interconnectivity of chromite in the olivine-chromite systems is-16 vol.%.The fitted activation enthalpies for pure polycrystalline olivine,polycrystalline olivine with isolated chromite,polycrystalline olivine with interconnected chromites,and pure polycrystalline chromite were 1.25,0.78-0.87,0.48-0.54,and 0.47 eV,respectively.Based on the chemical compositions and activation enthalpies,small polaron conduction was proposed to be the dominant conduction mechanism for polycrystalline olivine with various chromite contents.Furthermore,the conductivities of polycrystalline olivine with interconnected chromite(10-1.5-100.5 S/m)provides a reasonable explanation for the high conductivity anomalies in subduction-related tectonic environments.
基金funded by the Sino Probe project(Sinoprobe-02-04)
文摘The subduction of the Indian continental lithosphere under the Asian continent caused the uplift of the Tibet Plateau,resulting in the formation of a thickened continental crust twice of the normal value and the crustal shortening of at least 1500 km.Therefore,many models have been proposed to explain the shortening and material transportation mechanism of the Tibetan Plateau.
基金supported by National Natural Science Foundation of China(Nos.20836008 and 21076189)
文摘Although electrohydraulic discharge is effective for wastewater treatment,its application is restricted by water conductivity and limited to the treatment of low conductivity water. For high conductivity water treatment,water-surface discharge is the preferred choice.However. the metallic electrodes are easily corroded because of the high temperature and strong oxidative environment caused by gas phase discharge and the electrochemical reaction in water.As a result. the efficiency of the water treatment might be affected and the service life of the reactor might be shortened.In order to avoid the corrosion problem,nonmetallic electrode water-surface discharge is introduced into high conductivity water treatment in the present study.Carbon-felt and water were used as the high voltage electrode and ground electrode,respectively.A comparison of the electrical and chemical characteristics showed that nonmetallic electrode discharge maintained the discharge characteristics and enhanced the energy efficiency,and furthermore,the corrosion of metal electrodes was avoided.
基金financial support from the National Natural Science Foundation of China(No.51673199,51972301)the Youth Innovation Promotion Association of CAS(2015148)+2 种基金the Youth Innovation Foundation of DICP(ZZBS201615,ZZBS201708)the Dalian Outstanding Young Scientific Talent(2018RJ03)the National Key Research and Development Project(2019YFA0705600)。
文摘Silica-based anode is widely employed for high energy density Li-ion batteries owing to their high theoretical specific capacity(4200 m A h g-1).However,it is always accompanied by a huge volume expansion(300%)and shrinks during the lithiation/delithiation process,further leading to low cycle stability.Efforts to mitigate the adverse effects caused by volume expansion such as robust binder matrix,Coreshell structure,etc.,inevitably affect the electronic conductivity within the electrode.Herein,a high conductivity and elasticity Si anode(Ni-P-SBR(styrene-butadiene rubber)@Si)was designed and fabricated via the Ni-P-SBR composite-electroless-plating process.In this design,the Si particles are surrounded by SBR polymer and Ni particles,where the SBR can adapt to the volume change and Ni particles can provide the electrode with high electronic conductivity.Therefore,the Ni-P-SBR@Si delivers a high initial capacity of 3470 m A h g-1and presents capacity retention of 49.4%within 200 cycles at 600 m A g-1.Additionally,a high capacity of 1153 m A h g-1can be achieved at 2000 m A g-1and can be cycled stably under bending conditions.This strategy provides feasible ideas to solve the key issues that limit the practical application of Si anodes.
基金supported by the National Natural Foundation of China(No.52171146)the HFIPS Director's Fund(No.BJPY2023A08)the Natural Science Foundation of Anhui Province(No.2108085ME145).
文摘Because of the large coefficient of thermal expansion (CTE) (23 ppm K^(–1)), aluminum faces challenges in meeting the demands of high dimensional stability in precision instruments, microelectronics, and aerospace. Filling negative thermal expansion (NTE) particles into aluminum can create composites with either zero or low CTEs. However, the resulting composites usually have poor thermal conductivity due to their monolithic configuration, i.e., the NTE particles are filled randomly. Thus, heat sinks should be equipped to assist their usage (e.g., in thermal management). This in turn causes strong thermal stress in the packaging system owing to the high contrast in the CTEs between those monolithic composites and heat sinks typically made of copper or aluminum. Here, we propose a gradient configuration for low-CTE aluminum composite, inspired by the bamboo structure. The gradient distribution of NTE particles (Zn_(0.5)Sn_(0.3)Mn_(0.2)NMn_(3), ZSM) was obtained by laying up several layers of ZSM/Al with the ZSM fraction ranging from 0 to 28 vol.%. In the gradient composite, the CTE near room temperature varies from 3.4 pm K^(–1) on one side to 21 ppm K^(–1) on the other side. Such a gradient CTE distribution would facilitate the low-thermal-stress designs and thus help stabilize the dimension of a precision system. Furthermore, this composite has a high thermal conductivity of 130 W m^(–1) K^(–1) and strong toughness when the flexural loading is applied on the 28 vol.% ZSM/Al side. Our research provides a novel approach to designing metallic matrix composites with unprecedented performance.
基金supported by the National Natural Science Foundation of China(No.62175129)the Taishan Scholar of Shandong Province(No.tsqn202306014)the Qilu Young Scholar of Shandong University.
文摘The investigation of thermal transport properties of materials has become increasingly important in technological applications,including thermal management and energy conversion.Recently,ultrahigh or low thermal conductivity has been reported in nitride,boride,and chalcogenide by different strategies.However,the strategy to design oxide crystals with unique thermal properties is also a challenge.In this work,a new ternary oxide crystal Ga_(2)TeO_(6) is designed and expected to show high thermal conductivity due to its lone pairs-free octahedra connected along the caxis by sharing edges.The thermal conductivities of Ga_(2)TeO_(6) crystal are determined to be 19.2 and 23.9Wm^(-1) K^(-1) along the a-and c-axis directions at 323 K,respectively,which are significantly higher than those of most reported oxide crystals.First-principles calculations and crystal structure analyses reveal that the Ga_(2)TeO_(6) crystal shows high sound velocity and weak lattice anharmonicity due to lone pairs-free octahedra and highly symmetric group arrangement.The results suggest that much attention must be paid to the polyhedron with lone pairs and its arrangement in materials design to balance the functions and thermal properties.
基金financially supported by the National Natural Science Foundation of China(Nos.52173297,52071133 and U21A2051)Zhongyuan Scholar Workstation Funded Project(Nos.214400510028 and 224400510025)+7 种基金R&D Projects of Henan Academy of Sciences(No.220910009)the Natural Science Foundation of Henan Province(No.202300410139)the Key Scientific Research Projects of Colleges and Universities in Henan Province(No.24A430015)Henan Provincial Key Research and Development Program(No.231111231700)Beijing Nova Program(No.20230484371)Zhongyuan Youth Talent Support Program(No.202311)the Science and Technology R&D Plan Joint Fund of Henan Province(No.225200810052)the Key scientific research projects of colleges and universities in Henan province(No.23A43008)。
文摘A new Cu-Cr-Sc alloy was designed,prepared and subjected to deformation heat treatment.Transmission electron microscopy(TEM),electron backscatter diffraction(EBSD)and X-ray diffraction(XRD)were employed to investigate the effects of Sc on the microstructural changes in the Cu-Cr alloy in different states,examine the changes in the precipitates during aging,reveal the intrinsic correlation between the structure and property in the peak aging state,and evaluate the Sc distribution in the Cu-Cr alloy.The addition of Sc significantly increased the yield strength of the Cu-Cr alloy by~24.6%after aging at 480℃for 1 h,while it had a high electrical conductivity of81.5%international annealed copper standard(IACS).This enhancement was attributed to the effective inhibition of Cr phase coarsening and recrystallization through the addition of Sc,which strengthened the alloy.Furthermore,in the Cu-Cr-Sc alloy,most of the Sc atoms precipitated as the Cu_(4)Sc phase,with a small amount of Sc segregating at the grain boundaries to pin them.This grain boundary pinning helped to inhibit grain growth and further improve the strength.The main strengthening mechanisms identified in Cu-Cr-Sc alloys were dislocation strengthening and precipitation strengthening.
基金financially supported by the National Natural Science Foundation of China(Nos.52075351,51604177)the National Key Research and Development Program of China(No.2019YFA0705701)+4 种基金the National Funded Postdoctoral Researcher Program(No.GZC20231762)the Major S&T Infrastructure Construction Project of Sichuan Province(No.2020-510000-73-01441847)the International S&T Innovation Cooperation Program of Sichuan Province(No.2020YFH0039)the Chengdu International S&T Cooperation Funded Project(Nos.2020-GH02-00006HZ,2022-GH02-00027-HZ)the“1000 Talents Plan”of Sichuan Province,and the Talent Introduction Program of Sichuan University(No.YJ201410)。
文摘Anode active materials involving transition metal oxides and sulfides are of great significance for high energy density lithium-ion batteries(LIBs),but the huge volume expansion and inferior electronic conductivity upon cycling critically constrain their further application.Herein,from a new perspective,a highly conductive and stable 3D flexible composite current collector is rationally designed by facilely electrodepositing metallic Ni thin layer onto the carbon cloth(CC/Ni),which endows the supported active materials with exceptional electronic conductivity and structural stability.In addition,the homogeneously distributed metallic Ni protrusions external CC can strongly bond with the active components,ensuring the structural integrity of electrodes upon cycling.More importantly,the 3D network structure with large specific surface area provides abundant space to alleviate the volume expansion and more active sites for electrochemical reactions.Therefore,taking Ni_(3)S_(2)nanosheet(Ni_(3)S_(2)NS)anode as an example,the prepared Ni_(3)S_(2)NS@CC/Ni electrode shows a high specific capacity of 2.32 mAh/cm^(2)at 1mA/cm^(2)and high capacity retention of 1.68 mAh/cm^(2)at a high rate of 8mA/cm^(2).This study provides a universal approach to obtain highly conductive and stable 3D flexible current collectors towards high performance metal-ion batteries beyond LIBs.
基金the support from the National Natural Science Foundation of China(52403112,52473083)Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)+2 种基金the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57)Fundamental Research Funds for the Central Universities(D5000240062,D5000240077)Undergraduate Innovation&Business Program in Northwestern Polytechnical University(202410699041)。
文摘High-performance Ti_(3)C_(2)T_(x)fibers have garnered significant potential for smart fibers enabled fabrics.Nonetheless,a major challenge hindering their widespread use is the lack of strong interlayer interactions between Ti_(3)C_(2)T_(x)nanosheets within fibers,which restricts their properties.Herein,a versatile strategy is proposed to construct wet-spun Ti_(3)C_(2)T_(x)fibers,in which trace amounts of borate form strong interlayer crosslinking between Ti_(3)C_(2)T_(x)nanosheets to significantly enhance interactions as supported by density functional theory calculations,thereby reducing interlayer spacing,diminishing microscopic voids and promoting orientation of the nanosheets.The resultant Ti_(3)C_(2)T_(x)fibers exhibit exceptional electrical conductivity of 7781 S cm^(-1)and mechanical properties,including tensile strength of 188.72 MPa and Young's modulus of 52.42 GPa.Notably,employing equilibrium molecular dynamics simulations,finite element analysis,and cross-wire geometry method,it is revealed that such crosslinking also effectively lowers interfacial thermal resistance and ultimately elevates thermal conductivity of Ti_(3)C_(2)T_(x)fibers to 13 W m^(-1)K^(-1),marking the first systematic study on thermal conductivity of Ti_(3)C_(2)T_(x)fibers.The simple and efficient interlayer crosslinking enhancement strategy not only enables the construction of thermal conductivity Ti_(3)C_(2)T_(x)fibers with high electrical conductivity for smart textiles,but also offers a scalable approach for assembling other nanomaterials into multifunctional fibers.
基金This work was supported by the National Key R&D Program of China(Grant No.2017YFB1200800)the National Natural Science Foundation of China(Grant Nos.11725210,51827810 and 51637009)+1 种基金the Fundamental Research Funds for the Central Universities(Grant No.2018XZZX001-05)the Zhejiang Xinmiao Talent Projects。
文摘High strength and high conductivity(HSHC) Cu alloys are widely used in many fields,such as high-speed electric railway contact wires and integrated circuit lead frames. Pure Cu is well known to have excellent electrical conductivity but rather low strength. The main concern of HSHC Cu alloys is how to strengthen the alloy efficiently. However,when the Cu alloys are strengthened by a certain method,their electrical conductivity will inevitably decrease to a certain extent. This review introduces the strengthening methods of HSHC Cu alloys. Then the research progress of some typical HSHC Cu alloys such as Cu-Cr-Zr,Cu-Ni-Si,Cu-Ag,Cu-Mg is reviewed according to different alloy systems. Finally,the development trend of HSHC Cu alloys is forecasted. It is pointed out that precipitation and micro-alloying are effective ways to improve the performance of HSHC Cu alloys. At the same time,the production of HSHC Cu alloys also needs to comply with the large-scale,low-cost development trend of industrialization in the future.
基金The work was supported by funding from National Key Research and Development Program of China(Grant No.2016YFB0100105)Youth Innovation Promotion Association of the Chinese Academy of Sciences(Grant No.2017342)+1 种基金Zhejiang Provincial Natural Science Foundation of China(Grant No.LQ16E020003,LY18E020018,LY18E030011,LD18E020004)Natural Science Foundation of Ningbo(Grant No.2018A610012,2018A610010).
文摘A novel solid polymer electrolyte with comb-like structure is prepared via a solvent-free UV-cured method.The relationship between conductivity and molecular weight is investigated and revealed.The optimal electrolyte presents a considerably high conductivity of 1.44·10^(-4)S·cm^(-1)at 30℃.Meanwhile,it shows excellent compatibility with metallic lithium and wide electrochemical window(>5 V).To investigate the safety and cycling performance,the coin cell and soft package battery are assembled respectively.The LiFePO_(4)/Li coin cells exhibit initial discharge specific capacities of 163.2,147.7,137.3 and 108.7 mA·h·g^(-1)at 0.1,0.2,0.5 and 1C under 60℃,respectively.Notably,when the coin cells work at 30℃,the initial discharge specific capacities at 0.05,0.1,0.2 and 0.5C are 140.5,133.5,107.7 and 55.6 mA·h·g^(-1).Significantly,a 3.5 cm×7 cm solid-state soft pack battery is fabricated and cycling at 30℃.The first discharge capacity reaches to 137.5 mA·h·g^(-1)and the capacity retention is as high as 84.4%after 100 cycles at 0.2C and remain 95.5%after 100 cycles at 0.5C,respectively.These results shows a promising solid polymer electrolyte for solid-state batteries with good cycling and safety performance.
基金supported by the National Natural Science Foundation of China(Nos.52127802,52271137,and 51834009).
文摘A dual-scale hybrid HfB_(2)/Cu-Hf composite with HfB_(2) microparticles and Cu_(5) Hf nanoprecipitates was designed and prepared.The contribution of the hybrid effect to the mechanical properties and high-temperature performances was studied from macro and micro perspectives,respectively.The hybrid of dual-scale particles can make the strain distribution of the composite at the early deformation stage more uniform and delay the strain concentration caused by the HfB_(2) particle.The dislocation pinning of HfB_(2) particles and the coherent strengthening of Cu_(5) Hf nanoprecipitates simultaneously play a strengthening role,but the strength of the hybrid composite is not a simple superposition of two strengthening mod-els.In addition,both Cu_(5) Hf nanoprecipitates and HfB_(2) microparticles contribute to the high-temperature performance of the composite,the growth and phase transition of nanoprecipitates at high temperature will reduce their contribution to strength,while the stable HfB_(2) particles can inhibit the coarsening of matrix grains and maintain the high-density geometrically necessary dislocations(GNDs)in the matrix,which ensures more excellent high-temperature resistance of the hybrid composite.As a result,the hy-brid structure can simultaneously possess the advantages of multiple reinforcements and make up for the shortcomings of each other.Finally,a copper matrix composite with high strength,high conductivity,and excellent high-temperature performance is displayed.
基金financially supported by the National Key Research and Development Program of China (No.2017YFB0310400)the National Natural Science Foundation of China (No.51427802)。
文摘High-thermal-conductivity silicon nitride ceramic substrates are indispensable components for nextgeneration high-power electronic devices because of their excellent mechanical properties and high thermal conductivities, which make them suitable for applications in complex and extreme environments. Here, we present an overview of the recent developments in the preparation of high-thermal-conductivity silicon nitride ceramics. First,the factors affecting the thermal conductivity of silicon nitride ceramics are described. These include lattice oxygen and grain boundary phases, as well the oxygen content of the crystal lattice, which is the main influencing factor.Then, the methods to prepare high-thermal-conductivity silicon nitride ceramics are presented. Recent work on the preparation of high-thermal-conductivity silicon nitride is described in detail, including the raw materials used and the forming and sintering processes. Although great progress has been made, the development of a high-quality,low-cost fabrication process remains a challenge. Nevertheless, we believe that high-thermal-conductivity silicon nitride substrates are promising for massive practical applications in the next generation of high-power electronic devices.
基金supported by the National Key R&D Program of China (2020YFE0100200)the National Natural Science Foundation of China (Grant Nos.51921002,51927806).
文摘Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for building solid-state lithium batteries due to their excellent flexibility,scalability,and interfacial compatibility with electrodes.However,the low ionic conductivity and poor cyclic stability of SPEs do not meet the requirements for practical applications of lithium batteries.Here,a novel polymer dispersed ionic liquid-based solid polymer electrolyte(PDIL-SPE)is fabricated using the in situ polymerization-induced phase separation(PIPS)method.The as-prepared PDIL-SPE possesses both outstanding ionic conductivity(0.74 mS cm^(-1) at 25℃)and a wide electrochemical window(up to 4.86 V),and the formed unique three-dimensional(3D)co-continuous structure of polymer matrix and ionic liquid in PDIL-SPE can promote the transport of lithium ions.Also,the 3D co-continuous structure of PDIL-SPE effectively accommodates the severe volume expansion for prolonged lithium plating and stripping processes over 1000 h at 0.5 mA cm^(-2) under 25℃.Moreover,the LiFePO_(4)//Li coin cell can work stably over 150 cycles at a 1 C rate under room temperature with a capacity retention of 90.6%from 111.1 to 100.7 mAh g^(-1).The PDIL-SPE composite is a promising material system for enabling the ultrastable operation of solid-state lithium-metal batteries.
基金This project was supported by the Guangdong Provincial Foundation of Natural Science(021808)
文摘A rapid method to determine glutamic acid (Glu) in cerebrospinal fluid (CSF) by capillaryelectrophoresis with high frequency conductivity detection (contactless conductivity detection) wasdescribed. The CSF sample was pretreated with silver cation resin to remove high concentration ofCl- ions in CSF. The separation was achieved in the buffer solution of 10 mmol/L Tris and 8mmol/L boric acid at the separation voltage of 20.0 kV. Glu showed linear response in the range of5.0×10-6 to 6.0×10-3 mol/L, the limit of detection was 1.0×10-6 mol/L. The method was used foranalysis Glu in CSF satisfactorily with a recovery of 97.8-98.8%.
基金Funded by the National High Technology Research and Development Program of China("863"Program)(No.2006AA06A310)
文摘Using a walnut shellas a carbon source and ZnCl_2 as an activating agent,we resolved the temperature gradient problems of activated carbon in the microwave desorption process.An appropriate amount of silicon carbide was added to prepare the composite activated carbon with high thermalconductivity while developing VOC adsorption-microwave regeneration technology.The experimentalresults show that the coefficient of thermalconductivity of SiC-AC is three times as much as those of AC and SY-6.When microwave power was 480 W in its microwave desorption,the temperature of the bed thermaldesorption was 10 ℃ to 30 ℃ below that of normalactivated carbon prepared in our laboratory.The toluene desorption activation energy was 16.05 k J·mol^（-1）,which was 15% less than the desorption activation energy of commercialactivated carbon.This study testified that the process could maintain its high adsorption and regeneration desorption performances.
基金the National Natural Science Foundation of China(Nos.52272046,52090030,52090031,52122301,51973191)the Natural Science Foundation of Zhejiang Province(LR23E020003)+4 种基金Shanxi-Zheda Institute of New Materials and Chemical Engineering(2021SZ-FR004,2022SZ-TD011,2022SZ-TD012,2022SZ-TD014)Hundred Talents Program of Zhejiang University(188020*194231701/113,112300+1944223R3/003,112300+1944223R3/004)the Fundamental Research Funds for the Central Universities(Nos.226-2023-00023,226-2023-00082,2021FZZX001-17,K20200060)National Key R&D Program of China(NO.2022YFA1205300,NO.2022YFA1205301,NO.2020YFF0204400,NO.2022YFF0609801)“Pioneer”and“Leading Goose”R&D Program of Zhejiang 2023C01190.
文摘Highly thermally conductive graphitic film(GF)materials have become a competitive solution for the thermal management of high-power electronic devices.However,their catastrophic structural failure under extreme alternating thermal/cold shock poses a significant challenge to reliability and safety.Here,we present the first investigation into the structural failure mechanism of GF during cyclic liquid nitrogen shocks(LNS),which reveals a bubbling process characterized by“permeation-diffusion-deformation”phenomenon.To overcome this long-standing structural weakness,a novel metal-nanoarmor strategy is proposed to construct a Cu-modified graphitic film(GF@Cu)with seamless heterointerface.This well-designed interface ensures superior structural stability for GF@Cu after hundreds of LNS cycles from 77 to 300 K.Moreover,GF@Cu maintains high thermal conductivity up to 1088 W m^(−1)K^(−1)with degradation of less than 5%even after 150 LNS cycles,superior to that of pure GF(50%degradation).Our work not only offers an opportunity to improve the robustness of graphitic films by the rational structural design but also facilitates the applications of thermally conductive carbon-based materials for future extreme thermal management in complex aerospace electronics.
基金supported by the National Natural Science Foundation of China(Grant No.32250410309 and 52105582)Natural Science Foundation of Guangdong Province(Grant No.2022A1515010894 and 2022B0303040002)+1 种基金Fundamental Research Foundation of Shenzhen(JCYJ20210324095210030 and JCYJ20220818095810023)Shenzhen-Hong Kong-Macao S&T Program(Category C:SGDX20210823103200004)
文摘Extending the ionic conductivity is the pre-requisite of electrolytes in fuel cell technology for high-electrochemical performance.In this regard,the introduction of semiconductor-oxide materials and the approach of heterostructure formation by modulating energy bands to enhance ionic conduction acting as an electrolyte in fuel cell-device.Semiconductor(n-type;SnO_(2))plays a key role by introducing into p-type SrFe_(0.2)Ti_(0.8)O_(3-δ)(SFT)semiconductor perovskite materials to construct p-n heterojunction for high ionic conductivity.Therefore,two different composites of SFT and SnO_(2)are constructed by gluing p-and n-type SFT-SnO_(2),where the optimal composition of SFT-SnO_(2)(6∶4)heterostructure electrolyte-based fuel cell achieved excellent ionic conductivity 0.24 S cm^(-1)with power-output of 1004 mW cm^(-2)and high OCV 1.12 V at a low operational temperature of 500℃.The high power-output and significant ionic conductivity with durable operation of 54 h are accredited to SFT-SnO_(2)heterojunction formation including interfacial conduction assisted by a built-in electric field in fuel cell device.Moreover,the fuel conversion efficiency and considerable Faradaic efficiency reveal the compatibility of SFT-SnO_(2)heterostructure electrolyte and ruled-out short-circuiting issue.Further,the first principle calculation provides sufficient information on structure optimization and energy-band structure modulation of SFT-SnO_(2).This strategy will provide new insight into semiconductor-based fuel cell technology to design novel electrolytes.
文摘High thermal conductivity dense silica bricks have the higher thermal conductivity than ordinary silica bricks,which is conducive to the realization of energy saving and emission reduction in the iron and steel industry.The performance of ordinary silica bricks and high thermal conductivity dense silica bricks was compared,and the high thermal conductivity mechanism was analyzed.The results show that(1)compared with ordinary silica bricks,high thermal conductivity dense silica bricks have the characteristics of higher thermal conductivity,lower apparent porosity,higher tridymite content,higher compressive strength,and higher thermal expansion;(2)by increasing the tridymite content and reducing the porosity,the close packing of honeycombα-tridymite improves the density and continuity of the SiO_(2)frame structure of the silica bricks,and the larger area perpendicular to the heat transfer direction improves the thermal conductivity of the bricks;(3)the densification of the silica bricks also increases the thermal expansion of the bricks,but they still meet the standard requirements.
