The low-pressure and low-density conditions encountered at high altitudes significantly reduce the operating Reynolds number of micro radial-flow turbines,frequently bringing it below the self-similarity critical thre...The low-pressure and low-density conditions encountered at high altitudes significantly reduce the operating Reynolds number of micro radial-flow turbines,frequently bringing it below the self-similarity critical threshold of 3.5×10^(4).This departure undermines the applicability of conventional similarity-based design approaches.In this study,micro radial-flow turbines with rotor diameters below 50 mm are investigated through a combined approach integrating high-fidelity numerical simulations with experimental validation,aiming to elucidate the mechanisms by which low Reynolds numbers influence aerodynamic and thermodynamic performance.The results demonstrate that decreasing Reynolds number leads to boundary-layer thickening on blade surfaces,enhanced flow separation on the suction side,and increased secondary-flow losses within the blade passages.These effects jointly produce a pronounced and non-linear deterioration of turbine efficiency.Geometric scaling analysis further indicates that efficiency losses intensify with decreasing turbine size,and become particularly severe at low rotational speeds and high expansion ratios.Detailed flow-field analyses reveal a direct link between the degradation of blade loading distribution and the amplification of transverse pressure gradients under low-Reynolds-number conditions,providing physical insight into the observed performance decline.展开更多
Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomer...Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomers(p-phenylenediamine(Pa),benzidine(BD),and 4,4"-diamino-p-terphenyl(DATP))were used to synthesize a series of two-dimensional covalent-organic frameworks(COFs).The resulting COFs were named TpPa,TpBD,and TpDATP,respectively,and they showed uniform zincophilic sites,different pore sizes,and high Young's moduli on the Zn anode.Among them,TpPa and TpBD showed lower surface work functions and higher ion transfer numbers,which were conducive to uniform galvanizing/stripping zinc and inhibited dendrite growth.Theoretical calculations showed that TpPa and TpBD had wider negative potential region and greater adsorption capacity for Zn2+than TpDATP,providing more electron donor sites to coordinate with Zn^(2+).Symmetric cells protected by TpPa and TpBD stably cycled for more than 2300 h,whereas TpDATP@Zn and the bare zinc symmetric cells failed after around 150 and200 h.The full cells containing TpPa and TpBD modification layers also showed excellent cycling capacity at 1 A/g.This study provides comprehensive insights into the construction of highly reversible Zn anodes via COF modification layers for advanced rechargeable ZIBs.展开更多
CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pe...CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pessimistic gas channeling.Consequently,there is a need to develop conformance control materials that can be used in CO_(2)-EOR.Herein,to address the challenges of low strength and poor stability of polymer gel in high temperature and low permeability reservoirs,a new organic/metal ion composite crosslinking polymer gel(AR-Gel)is reported,which is formed by low hydrolysis and medium to high molecular weight polymer(CX-305),organic crosslinking agent(phenolic resin),and aluminium citrate(AI(Ⅲ)).The crosslinking of AI(Ⅲ)with carboxyl group and organic/metal ion double crosslinking can construct a more complex and stable polymer gel structure on the basis of traditional chemical crosslinking,to cope with the harsh conditions such as high temperature.The structure-activity relationship of AR-Gel was revealed by rheology behavior and micro-morphology.The applicability of AR-Gel in reservoir was investigated,as was its strength and stability in supercritical CO_(2).The anti-gas channeling and enhanced oil recovery of AR-Gel were investigated using low permeability fractured cores,and the field process parameters were provided.The gel can be used to meet supercritical CO_(2)reservoirs at 110℃and 20,000 mg/L salinity,with long-term stability over 60 days.The plugging rate of AR-Gel for fractured co re was 97%,with subsequent CO_(2)flooding re sulting in an enhanced oil recovery by 34.5%.ARGel can effectively control CO_(2)gas channeling and enhanced oil recovery.It offers a new material with high strength and temperature resistance,which is particularly beneficial in the CO_(2)flooding for the conformance control of oil field.展开更多
Ultra-low emission of nitrogen oxide(NO_(x))is an irreversible trend for the development of waste-to-energy industry.But traditional approaches to remove NO_(x) face significant challenge s,such as low denitration eff...Ultra-low emission of nitrogen oxide(NO_(x))is an irreversible trend for the development of waste-to-energy industry.But traditional approaches to remove NO_(x) face significant challenge s,such as low denitration efficiency,complex denitration system,and high investment and operating cost.Here we put forward a novel polymer non-catalytic reduction(PNCR)technology that utilized a new type of polymer agent to remove NO_(x),and the proposed PNCR technology was applied to the existing waste-to-energy plant to test the denitration performance.The PNCR technology demonstrated excellent denitration performance with a NO_(x) emission concentration of<100 mg/Nm^(3) and high denitration efficiency of>75%at the temperature range of 800-900℃,which showed the application feasibility even on the complex and unstable industrial operating conditions.In addition,PNCR and hybrid polymer/selective non-catalytic reduction(PNCR/SNCR)technology possessed remarkable economic advantages including low investment fee and low operating cost of<10 CNY per ton of municipal solid waste(MSW)compared with selective catalytic reduction(SCR)technology.The excellent denitration performance of PNCR technology forebodes a broad industrial application prospect in the field of flue gas cleaning for waste-to-energy plants.展开更多
In this paper,a wideband true time delay line for X-band is designed to overcome the beam dispersion problem in a high-resolution spaceborne synthetic aperture radar phased array antenna system.The delay line loads th...In this paper,a wideband true time delay line for X-band is designed to overcome the beam dispersion problem in a high-resolution spaceborne synthetic aperture radar phased array antenna system.The delay line loads the electromagnetic bandgap structure on the upper surface of the substrate integrated waveguide.This is equivalent to including an additional inductance-capacitance for energy storage,which realizes the slow-wave effect.A microstrip line-SIW tapered transition structure is introduced to achieve a low loss and a large bandwidth.In the frequency band between 8-12 GHz,the measured results show that the delay multiplier of the delay line reaches 4 times,i.e.,delay line’s delay time is 4 times larger than 50Ωmicrostrip line with same length.Furthermore,the delay fluctuation,i.e.,the difference between the maximum and minimum delay as a percentage of the standard delay is only 2.5%,the insertion loss is less than-2.5 dB,and the return loss is less than-15 dB.Compared with the existing delay lines,the proposed delay line has the advantages of high delay efficiency,low delay error,wide bandwidth and low loss,which has good practical value and application prospects.展开更多
MnCO_(3)represents a potentially high-capacity and low-cost anode candidate to replace graphite for enhancing energy density of commercial lithium-ion batteries,but it suffers from poor electrical conductivity and ser...MnCO_(3)represents a potentially high-capacity and low-cost anode candidate to replace graphite for enhancing energy density of commercial lithium-ion batteries,but it suffers from poor electrical conductivity and serious volumetric change,largely hindering its practical applications.展开更多
Polyaniline(PANi)hydrogels have a wide range of applications in artificial skin,flexible robotics,and movement monitoring.Nevertheless,limited by the modulus mismatch between rigid PANi and the soft hydrogel matrix,th...Polyaniline(PANi)hydrogels have a wide range of applications in artificial skin,flexible robotics,and movement monitoring.Nevertheless,limited by the modulus mismatch between rigid PANi and the soft hydrogel matrix,the high strength and toughness of the PANi hydrogel are mutually exclusive.Although the introduction of sacrificial bonds into the hydrogel network can alleviate this contradiction to a certain extent,it always causes pronounced energy hysteresis during hydrogel deformation.Inspired by the energy storage and release of macroscopic springs,in this work,we propose a molecular entanglement approach for the fabrication of PANi hydrogels featuring high toughness and low hysteresis,where flexible poly(ethylene glycol)(PEG)is entangled with chemically cross-linked poly(acrylic acid)(PAA)as a hydrogel matrix,and rigid PANi as a conductive filler.The resultant PAA/PEG/PANi hydrogel exhibited high mechanical properties(fracture strength of 0.75 MPa and toughness of 4.81 MJ·m^(-3))and a low energy dissipation ratio(28.2%when stretching to 300%).Moreover,the PAA/PEG/PANi hydrogel possesses a good electrical response to external forces and can be employed as a strain sensor to monitor human joint movements by producing specific electrical signals.This work provides a straightforward strategy for preparing tough conductive PANi hydrogels with low hysteresis,showing potential for the development of healthcare devices.展开更多
With the theme of“new infrastructure construction in airspace with standards as the foundation-Driving the high-quality development of the low-altitude economy”,a sub-forum brought together representatives from gove...With the theme of“new infrastructure construction in airspace with standards as the foundation-Driving the high-quality development of the low-altitude economy”,a sub-forum brought together representatives from government departments,research institutes,universities,and enterprises to probe into the key role of standardization in the development of the low-altitude economy.展开更多
A new Ag/AgCl sensor for measuring marine electric fields was prepared and characterized through electrochemical methods and scanning electron microscopy.Its performance was evaluated in both laboratory and deep-water...A new Ag/AgCl sensor for measuring marine electric fields was prepared and characterized through electrochemical methods and scanning electron microscopy.Its performance was evaluated in both laboratory and deep-water settings.The study indicates that the double-pulse electrodeposition method is advantageous for producing Ag/AgCl sensors that maintain excellent stability over time.During a 20-day continuous stability test,the potential difference of the sensor consistently remained between -24.76μV and 62.07μV,with a minimum potential difference drift of 2.77μV per 24 h.All sensors accurately detected artificial signals in both the time and frequency domains,and their responses were consistent with one another.The minimum noise level of the sensor was 0.59 nV(√Hz)^(-1)@1 Hz.The sensor performed well in high-precision electric field measurements at a depth of approximately 2800 m in the South China Sea.The high stability and low noise level of the sensor make it an effective tool for detecting electrical conductivity structures beneath the seafloor.展开更多
High-temperature thin-film strain sensors are advanced technological devices for monitoring stress and strain in extreme environments,but the coupling of temperature and strain at high temperature is a challenge for t...High-temperature thin-film strain sensors are advanced technological devices for monitoring stress and strain in extreme environments,but the coupling of temperature and strain at high temperature is a challenge for their use.Here,this issue is addressed by creating a composite ink that combines Pb_(2)Ru_(2)O_(6) and TiB_(2) using polysilazane(PSZ)as a binder.After direct writing and annealing the PSZ/Pb_(2)Ru_(2)O_(6)/TiB_(2) film at 800℃ in air,the resulting thin film exhibits a low temperature coefficient of resistance(TCR)of only 281 ppm/℃ over a wide temperature range from 100℃ to 700℃,while also demonstrating high sensitivity with a gauge factor approaching 19.8.This exceptional performance is attributed to the intrinsic properties of Pb_(2)Ru_(2)O_(6),which has positive TCR at high temperature,and TiB2,which has negative TCR at high temperature.Combining these materials reduces the overall TCR of the film.Tests showed that the PSZ/Pb_(2)Ru_(2)O_(6)/TiB_(2) film maintains stable strain responses and significant signal output even under varying temperature.These findings provide valuable insights for developing high-temperature strain sensors with low TCR and high sensitivity,highlighting their potential for applications in high-temperature strain measurements.展开更多
In this paper,the effect of vibration intensity on the spatial distribution of sulfur content in bed particles was studied.The effects of vibration and airflow on the mechanical characteristics of particles were studi...In this paper,the effect of vibration intensity on the spatial distribution of sulfur content in bed particles was studied.The effects of vibration and airflow on the mechanical characteristics of particles were studied,the collision behavior mode of particles was determined,the spatial saltation law of particles was investigated,the spatial functional axis of beds was determined,and the saltation separation period of particles was determined.The test results show that:When separation bed provides inlet airflow velocity(U_(in)) is 2.55 m/s,the airflow distribution interval of I,II and III areas were U_(I)=2.55-2.57 m/s,U_(II)=1.33-1.35 m/s,U_(III)=0.35-0.38 m/s,respectively;when separation bed vibration amplitude (A)A=2.4-2.5 mm,separation bed vibration frequency (f) f=23-24 Hz,the desulfurization effect is the best.When vibration intensity (Γ)Γ=1.22,U_(in)=1.05 m/s,the particles have disordered contact and collision behavior.WhenΓ=14.89,U_(in)=3.18 m/s,the particles have a transition cataclastic collision.WhenΓ=5.80,U_(in)=2.55 m/s,the particles have directional collision behavior.It is determined that the OX axis is the transverse stable diffusion axis of the material,the OY axis is the longitudinal gradient transport axis of the material,and the OZ axis is the vertical density cascade distribution axis of the material.When separation time (T) T=0-10 s was the period of disorderly diffusion and mixing of particles,T=10-20 s was the period of directional migration and stratification of particles,and T=20-30 s was the period of cascade distribution and separation of particles.Finally,separation experiments conducted under optimal operating parameters demonstrated that the clean coal yield was 72.02%with a sulfur content of 0.98%.展开更多
Austenitic stainless steels(ASSs)are widely used in various in-dustries such as aerospace,nuclear energy,food,and biotechnol-ogy owing to their exceptional combination of corrosion resistance,weldability,toughness,and...Austenitic stainless steels(ASSs)are widely used in various in-dustries such as aerospace,nuclear energy,food,and biotechnol-ogy owing to their exceptional combination of corrosion resistance,weldability,toughness,and formability[1,2].However,a signifi-cant drawback of ASSs is their low yield strength,which limits their applications in extreme environments[3].Grain boundary(GB)engineering plays a crucial role in enhancing the strength of ASSs[4,5].For instance,grain refinement techniques such as cold rolling followed by annealing[6],severe plastic deformation(SPD)[7],and surface mechanical attrition/rolling treatments[8,9]introduce high-angle GBs(HAGBs)into ASSs,thereby improving their strength.However,the high density of HAGBs limits their ca-pacity for dislocation storage and multiplication,leading to a sig-nificant loss of ductility[10,11].Additionally,several studies have shown that twin boundaries(TBs)can simultaneously enhance the strength,toughness,and corrosion resistance of ASSs[12,13].展开更多
A D-type photonic crystal fiber(PCF) sensor based on surface plasmon resonance(SPR) principle is designed.In order to excite the SPR effect,a gold film is plated on the open-loop channel of the sensor,the free electro...A D-type photonic crystal fiber(PCF) sensor based on surface plasmon resonance(SPR) principle is designed.In order to excite the SPR effect,a gold film is plated on the open-loop channel of the sensor,the free electrons in a metal are resonated with photons.The structural parameters are fine-tuned and the sensing performance of the sensor is studied.The results show that the maximum spectral sensitivity reaches 18 000 nm/RIU in the refractive index range of 1.24—1.32,and the maximum resolution is 5.56×10^(-6) RIU.The novel structure with high sensitivity and low refractive index provides a new perspective for fluid density detection.展开更多
The z-axis-inclined 3D printing process using short carbon fiber-reinforced thermoplastic composites offers the potential for the support-free fabrication of complex structures and theoretically unlimited extension of...The z-axis-inclined 3D printing process using short carbon fiber-reinforced thermoplastic composites offers the potential for the support-free fabrication of complex structures and theoretically unlimited extension of printed components.It has emerged as a promising approach for in-orbit manufacturing of high-performance thermoplastic composite truss structures.However,extreme conditions of the space environment,such as high vacuum and fluctuating high-low temperatures,significantly alter the heat-transfer behavior during the printing process,often resulting in dimensional inaccuracies and degraded mechanical performance.Existing process optimization strategies fail to account for the coupled effects of vacuum and thermal extremes,limiting their applicability in guiding process design under varying vacuum temperature conditions.To address this gap,this study establishes a truss3D printing experimental platform with in situ temperature-monitoring capability under ground-simulated space conditions.It systematically investigates the effects of printing speed and structural geometry on the pre-bonding surface temperature and forming quality of truss structures in high-low temperature vacuum environments.This study reveals the mechanism by which processing and structural parameters affect the component performance through their influence on the pre-bonding surface temperature and dimensional accuracy.The experimental results show that under high-temperature vacuum conditions,the pre-bonding surface temperature is relatively high,resulting in good interfacial bonding.However,increasing the printing speed reduces the forming accuracy and leads to a decline in mechanical performance.In contrast,under low-temperature vacuum conditions,where the pre-bonding surface temperatures are lower,increasing the printing speed within a specific range effectively increases the surface temperature and bonding quality,thereby improving mechanical properties.Additionally,owing to frequent path transitions,the diagonal-strut truss exhibits a lower forming accuracy and pre-bonding surface temperature than the infilling truss,resulting in inferior mechanical performance in high-low temperature vacuum environments.展开更多
The Global Navigation Satellite System(GNSS)has been widely adopted in numerous fields,including intelligent transportation,remote sensing,and aeronautical and astronautical engineering.As new navigation approaches,te...The Global Navigation Satellite System(GNSS)has been widely adopted in numerous fields,including intelligent transportation,remote sensing,and aeronautical and astronautical engineering.As new navigation approaches,technologies,and applications continue to emerge,they attract significant global attention.Ensuring reliable positioning solutions with high accuracy,strong anti-interference capabilities,high availability and low integrity risks has become increasingly critical.展开更多
In recent years,deep learning has been introduced into the field of Single-pixel imaging(SPI),garnering significant attention.However,conventional networks still exhibit limitations in preserving image details.To addr...In recent years,deep learning has been introduced into the field of Single-pixel imaging(SPI),garnering significant attention.However,conventional networks still exhibit limitations in preserving image details.To address this issue,we integrate Large Kernel Convolution(LKconv)into the U-Net framework,proposing an enhanced network structure named U-LKconv network,which significantly enhances the capability to recover image details even under low sampling conditions.展开更多
Oil reservoirs with low permeability and porosity that are in the middle and late exploitation periods in China＇s onshore oil fields are mostly in the high-water-cut production stage.This stage is associated with sev...Oil reservoirs with low permeability and porosity that are in the middle and late exploitation periods in China＇s onshore oil fields are mostly in the high-water-cut production stage.This stage is associated with severely non-uniform local-velocity flow profiles and dispersed-phase concentration（of oil droplets） in oil-water two-phase flow,which makes it difficult to measure water holdup in oil wells.In this study,we use an ultrasonic method based on a transmission-type sensor in oil-water two-phase flow to measure water holdup in lowvelocity and high water-cut conditions.First,we optimize the excitation frequency of the ultrasonic sensor by calculating the sensitivity of the ultrasonic field using the finite element method for multiphysics coupling.Then we calculate the change trend of sound pressure level attenuation ratio with the increase in oil holdup to verify the feasibility of the employed diameter for the ultrasonic sensor.Based on the results,we then investigate the effects of oildroplet diameter and distribution on the ultrasonic field.To further understand the measurement characteristics of the ultrasonic sensor,we perform a flow loop test on vertical upward oilwater two-phase flow and measure the responses of the optimized ultrasonic sensor.The results show that the ultrasonic sensor yields poor resolution for a dispersed oil slug in water flow（D OS/W flow）,but the resolution is favorable for dispersed oil in water flow（D O/W flow） and very fine dispersed oil in water flow（VFD O/W flow）.This research demonstrates the potential application of a pulsed-transmission ultrasonic method for measuring the fraction of individual components in oil-water two-phase flow with a low mixture velocity and high water cut.展开更多
[Objective] This study aimed to investigate differences in phosphorus effi-ciency between two-rowed barley and multiple-rowed barley and differences in phos-phorus efficiency among various agronomic traits, and to exp...[Objective] This study aimed to investigate differences in phosphorus effi-ciency between two-rowed barley and multiple-rowed barley and differences in phos-phorus efficiency among various agronomic traits, and to explore the relationship be-tween agronomic traits and row type with phosphorus efficiency. [Method] Under available phosphorus mass fractions of 1.32 and 36.6 mg/kg, 172 barley varieties, including 79 two-rowed foreign barley, 22 multiple-rowed foreign barley, 58 two-rowed Chinese barley and 13 multiple-rowed Chinese barley, were selected to com-pare differences in phosphorus efficiency-related agronomic traits. Plant height, spike length, number of unfil ed grains, number of unfil ed grains, main panicle weight, to-tal panicle weight, total stem weight, weight of aerial part and heading stage were surveyed for statistical analysis. [Result] The results showed that, various agronomic traits were larger under fertilization condition than under non-fertilization condition ex-cept number of unfil ed grains and heading stage. Plant high, spike length, weight of aerial part and heading stage varied greatly under non-fertilization condition; number of fil ed grains, number of unfil ed grains and total stem weight varied greatly under fertilization condition. In two-rowed barley, plant height and number of fil ed grains of Chinese varieties were higher than those of foreign varieties, while other agronomic traits such as spike length, number of unfil ed grains, main panicle weight, total panicle weight, total stem weight, weight of aerial part and heading stage of foreign varieties were higher than those of Chinese varieties. Spike length and weight of aerial part in multiple-rowed and two-rowed foreign barley were higher than those in Chinese barley. In multiple-rowed barley, plant height, number of unfil ed grains, total panicle weight and total stem weight of foreign varieties were higher under non-fer-tilization condition and lower under fertilization condition compared with those of Chi-nese varieties; number of fil ed grains, main panicle weight and heading stage of foreign varieties were lower under non-fertilization condition and higher under fertil-ization condition compared with those of Chinese varieties. [Conclusion] Heading stage, number of fil ed grains, number of unfil ed grains and total stem weight are more sensitive to phosphorus efficiency. Multiple-rowed barley is more sensitive to phosphorus efficiency than two-rowed barley.展开更多
The comprehensive improvement strategy of intra-county environment pollution in the city and countryside was searched.By the research method which combined the microscopic view,the macroscopic view with the dynamic pe...The comprehensive improvement strategy of intra-county environment pollution in the city and countryside was searched.By the research method which combined the microscopic view,the macroscopic view with the dynamic perspective,the seriousness of rural water quality,soil and atmospheric pollution in Xiangxiang,Xiangtan and the surrounding areas in Shaoshan irrigated area was revealed.The control measure which was 'four-dimensional pollution in the city and countryside'—— low-carbon-high-value agriculture and the technology innovation was proposed.The low-carbon-high-value technology innovation industrialization demonstration in three parts which included the pre-production,mid-production and post-production deep-processing of cultivation and breeding industry in the ecological cyclic agricultural garden in Shaoshan irrigated area was the driving force.We tried to propel the low-carbon ecological cultivation and breeding industry which included the paddy rice,grass,tree,medicinal herbs and pig,cow,chick,duck,fish.We wanted to relieve the structural unbalance of previous cultivation and breeding industry,'cheap grain hurting the farmers' and the short-leg problem of social-economic-ecological benefit.The results showed that the low-carbon-high-value agricultural system was a poly-generation technology system which promoted the multi-level and grading utilization,saved the energy,reduced the consumption and cleaned the production based on the ecology.展开更多
Edward Hall offers us an effective means of examining cultural similarities and differences,that is the classification of high-context and low-context culture.The paper attempts to analyze a case of a Chinese refusal ...Edward Hall offers us an effective means of examining cultural similarities and differences,that is the classification of high-context and low-context culture.The paper attempts to analyze a case of a Chinese refusal from the perspective of highcontext and low-context communication and explores the differences between the two types of communication.展开更多
基金supported by the Tiangsu Association for Science and Technology(Grant No.JSKX 0225089).
文摘The low-pressure and low-density conditions encountered at high altitudes significantly reduce the operating Reynolds number of micro radial-flow turbines,frequently bringing it below the self-similarity critical threshold of 3.5×10^(4).This departure undermines the applicability of conventional similarity-based design approaches.In this study,micro radial-flow turbines with rotor diameters below 50 mm are investigated through a combined approach integrating high-fidelity numerical simulations with experimental validation,aiming to elucidate the mechanisms by which low Reynolds numbers influence aerodynamic and thermodynamic performance.The results demonstrate that decreasing Reynolds number leads to boundary-layer thickening on blade surfaces,enhanced flow separation on the suction side,and increased secondary-flow losses within the blade passages.These effects jointly produce a pronounced and non-linear deterioration of turbine efficiency.Geometric scaling analysis further indicates that efficiency losses intensify with decreasing turbine size,and become particularly severe at low rotational speeds and high expansion ratios.Detailed flow-field analyses reveal a direct link between the degradation of blade loading distribution and the amplification of transverse pressure gradients under low-Reynolds-number conditions,providing physical insight into the observed performance decline.
基金financially supported by the National Natural Science Foundation of China(62464010)Spring City Plan-Special Program for Young Talents(K202005007)+3 种基金Yunnan Talents Support Plan for Yong Talents(XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(202101BA070001-138)Key Laboratory of Artificial Microstructures in Yunnan Higher EducationFrontier Research Team of Kunming University 2023。
文摘Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomers(p-phenylenediamine(Pa),benzidine(BD),and 4,4"-diamino-p-terphenyl(DATP))were used to synthesize a series of two-dimensional covalent-organic frameworks(COFs).The resulting COFs were named TpPa,TpBD,and TpDATP,respectively,and they showed uniform zincophilic sites,different pore sizes,and high Young's moduli on the Zn anode.Among them,TpPa and TpBD showed lower surface work functions and higher ion transfer numbers,which were conducive to uniform galvanizing/stripping zinc and inhibited dendrite growth.Theoretical calculations showed that TpPa and TpBD had wider negative potential region and greater adsorption capacity for Zn2+than TpDATP,providing more electron donor sites to coordinate with Zn^(2+).Symmetric cells protected by TpPa and TpBD stably cycled for more than 2300 h,whereas TpDATP@Zn and the bare zinc symmetric cells failed after around 150 and200 h.The full cells containing TpPa and TpBD modification layers also showed excellent cycling capacity at 1 A/g.This study provides comprehensive insights into the construction of highly reversible Zn anodes via COF modification layers for advanced rechargeable ZIBs.
基金project was supported by the Fund of State Key Laboratory of Deep Oil and Gas,China University of Petroleum(East China)(No.SKLDOG2024-ZYRC-06)Key Program of National Natural Science Foundation of China(52130401)+1 种基金National Natural Science Foundation of China(52104055,52374058)Shandong Provincial Natural Science Foundation,China(ZR2021ME171,ZR2024YQ043)。
文摘CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pessimistic gas channeling.Consequently,there is a need to develop conformance control materials that can be used in CO_(2)-EOR.Herein,to address the challenges of low strength and poor stability of polymer gel in high temperature and low permeability reservoirs,a new organic/metal ion composite crosslinking polymer gel(AR-Gel)is reported,which is formed by low hydrolysis and medium to high molecular weight polymer(CX-305),organic crosslinking agent(phenolic resin),and aluminium citrate(AI(Ⅲ)).The crosslinking of AI(Ⅲ)with carboxyl group and organic/metal ion double crosslinking can construct a more complex and stable polymer gel structure on the basis of traditional chemical crosslinking,to cope with the harsh conditions such as high temperature.The structure-activity relationship of AR-Gel was revealed by rheology behavior and micro-morphology.The applicability of AR-Gel in reservoir was investigated,as was its strength and stability in supercritical CO_(2).The anti-gas channeling and enhanced oil recovery of AR-Gel were investigated using low permeability fractured cores,and the field process parameters were provided.The gel can be used to meet supercritical CO_(2)reservoirs at 110℃and 20,000 mg/L salinity,with long-term stability over 60 days.The plugging rate of AR-Gel for fractured co re was 97%,with subsequent CO_(2)flooding re sulting in an enhanced oil recovery by 34.5%.ARGel can effectively control CO_(2)gas channeling and enhanced oil recovery.It offers a new material with high strength and temperature resistance,which is particularly beneficial in the CO_(2)flooding for the conformance control of oil field.
基金supported by the National Natural Science Foundation of China(No.92367107)。
文摘Ultra-low emission of nitrogen oxide(NO_(x))is an irreversible trend for the development of waste-to-energy industry.But traditional approaches to remove NO_(x) face significant challenge s,such as low denitration efficiency,complex denitration system,and high investment and operating cost.Here we put forward a novel polymer non-catalytic reduction(PNCR)technology that utilized a new type of polymer agent to remove NO_(x),and the proposed PNCR technology was applied to the existing waste-to-energy plant to test the denitration performance.The PNCR technology demonstrated excellent denitration performance with a NO_(x) emission concentration of<100 mg/Nm^(3) and high denitration efficiency of>75%at the temperature range of 800-900℃,which showed the application feasibility even on the complex and unstable industrial operating conditions.In addition,PNCR and hybrid polymer/selective non-catalytic reduction(PNCR/SNCR)technology possessed remarkable economic advantages including low investment fee and low operating cost of<10 CNY per ton of municipal solid waste(MSW)compared with selective catalytic reduction(SCR)technology.The excellent denitration performance of PNCR technology forebodes a broad industrial application prospect in the field of flue gas cleaning for waste-to-energy plants.
基金Supported by the National Natural Science Foundation of China(61971401)。
文摘In this paper,a wideband true time delay line for X-band is designed to overcome the beam dispersion problem in a high-resolution spaceborne synthetic aperture radar phased array antenna system.The delay line loads the electromagnetic bandgap structure on the upper surface of the substrate integrated waveguide.This is equivalent to including an additional inductance-capacitance for energy storage,which realizes the slow-wave effect.A microstrip line-SIW tapered transition structure is introduced to achieve a low loss and a large bandwidth.In the frequency band between 8-12 GHz,the measured results show that the delay multiplier of the delay line reaches 4 times,i.e.,delay line’s delay time is 4 times larger than 50Ωmicrostrip line with same length.Furthermore,the delay fluctuation,i.e.,the difference between the maximum and minimum delay as a percentage of the standard delay is only 2.5%,the insertion loss is less than-2.5 dB,and the return loss is less than-15 dB.Compared with the existing delay lines,the proposed delay line has the advantages of high delay efficiency,low delay error,wide bandwidth and low loss,which has good practical value and application prospects.
基金supported by the National Natural Science Foundation of China(Nos.52102088 and 22075026)support from Teli Fellowship,Beijing Institute of Technology,and facility support from Analysis&Testing Center,and Experimental Center of Materials Sciences&Engineering at Beijing Institute of Technology.
文摘MnCO_(3)represents a potentially high-capacity and low-cost anode candidate to replace graphite for enhancing energy density of commercial lithium-ion batteries,but it suffers from poor electrical conductivity and serious volumetric change,largely hindering its practical applications.
基金financially supported by the Beijing Natural Science Foundation(No.L233016)。
文摘Polyaniline(PANi)hydrogels have a wide range of applications in artificial skin,flexible robotics,and movement monitoring.Nevertheless,limited by the modulus mismatch between rigid PANi and the soft hydrogel matrix,the high strength and toughness of the PANi hydrogel are mutually exclusive.Although the introduction of sacrificial bonds into the hydrogel network can alleviate this contradiction to a certain extent,it always causes pronounced energy hysteresis during hydrogel deformation.Inspired by the energy storage and release of macroscopic springs,in this work,we propose a molecular entanglement approach for the fabrication of PANi hydrogels featuring high toughness and low hysteresis,where flexible poly(ethylene glycol)(PEG)is entangled with chemically cross-linked poly(acrylic acid)(PAA)as a hydrogel matrix,and rigid PANi as a conductive filler.The resultant PAA/PEG/PANi hydrogel exhibited high mechanical properties(fracture strength of 0.75 MPa and toughness of 4.81 MJ·m^(-3))and a low energy dissipation ratio(28.2%when stretching to 300%).Moreover,the PAA/PEG/PANi hydrogel possesses a good electrical response to external forces and can be employed as a strain sensor to monitor human joint movements by producing specific electrical signals.This work provides a straightforward strategy for preparing tough conductive PANi hydrogels with low hysteresis,showing potential for the development of healthcare devices.
文摘With the theme of“new infrastructure construction in airspace with standards as the foundation-Driving the high-quality development of the low-altitude economy”,a sub-forum brought together representatives from government departments,research institutes,universities,and enterprises to probe into the key role of standardization in the development of the low-altitude economy.
基金supported by the National Natural Science Foundation of China(Nos.U23B20158,91958210,42004055)。
文摘A new Ag/AgCl sensor for measuring marine electric fields was prepared and characterized through electrochemical methods and scanning electron microscopy.Its performance was evaluated in both laboratory and deep-water settings.The study indicates that the double-pulse electrodeposition method is advantageous for producing Ag/AgCl sensors that maintain excellent stability over time.During a 20-day continuous stability test,the potential difference of the sensor consistently remained between -24.76μV and 62.07μV,with a minimum potential difference drift of 2.77μV per 24 h.All sensors accurately detected artificial signals in both the time and frequency domains,and their responses were consistent with one another.The minimum noise level of the sensor was 0.59 nV(√Hz)^(-1)@1 Hz.The sensor performed well in high-precision electric field measurements at a depth of approximately 2800 m in the South China Sea.The high stability and low noise level of the sensor make it an effective tool for detecting electrical conductivity structures beneath the seafloor.
基金the National Key Research and Development Program of China(Grant No.2021YFB2012100)the Major Science and Technology Projects in Fujian Province(Grant No.2023HZ021005)+1 种基金the Open Project Program of Fujian Key Laboratory of Special Intelligent Equipment Measurement and Control(Grant No.FJIES2023KF06)the Industry-University-Research Co-operation Fund of the Eighth Research Institute of China Aerospace Science and Technology Corporation(Grant No.SAST2023-061).
文摘High-temperature thin-film strain sensors are advanced technological devices for monitoring stress and strain in extreme environments,but the coupling of temperature and strain at high temperature is a challenge for their use.Here,this issue is addressed by creating a composite ink that combines Pb_(2)Ru_(2)O_(6) and TiB_(2) using polysilazane(PSZ)as a binder.After direct writing and annealing the PSZ/Pb_(2)Ru_(2)O_(6)/TiB_(2) film at 800℃ in air,the resulting thin film exhibits a low temperature coefficient of resistance(TCR)of only 281 ppm/℃ over a wide temperature range from 100℃ to 700℃,while also demonstrating high sensitivity with a gauge factor approaching 19.8.This exceptional performance is attributed to the intrinsic properties of Pb_(2)Ru_(2)O_(6),which has positive TCR at high temperature,and TiB2,which has negative TCR at high temperature.Combining these materials reduces the overall TCR of the film.Tests showed that the PSZ/Pb_(2)Ru_(2)O_(6)/TiB_(2) film maintains stable strain responses and significant signal output even under varying temperature.These findings provide valuable insights for developing high-temperature strain sensors with low TCR and high sensitivity,highlighting their potential for applications in high-temperature strain measurements.
基金supported by Science and Technology Project of Hebei Education Department (No. ZD2022128)Tangshan Science and Technology Plan Project (No. 22130226H)。
文摘In this paper,the effect of vibration intensity on the spatial distribution of sulfur content in bed particles was studied.The effects of vibration and airflow on the mechanical characteristics of particles were studied,the collision behavior mode of particles was determined,the spatial saltation law of particles was investigated,the spatial functional axis of beds was determined,and the saltation separation period of particles was determined.The test results show that:When separation bed provides inlet airflow velocity(U_(in)) is 2.55 m/s,the airflow distribution interval of I,II and III areas were U_(I)=2.55-2.57 m/s,U_(II)=1.33-1.35 m/s,U_(III)=0.35-0.38 m/s,respectively;when separation bed vibration amplitude (A)A=2.4-2.5 mm,separation bed vibration frequency (f) f=23-24 Hz,the desulfurization effect is the best.When vibration intensity (Γ)Γ=1.22,U_(in)=1.05 m/s,the particles have disordered contact and collision behavior.WhenΓ=14.89,U_(in)=3.18 m/s,the particles have a transition cataclastic collision.WhenΓ=5.80,U_(in)=2.55 m/s,the particles have directional collision behavior.It is determined that the OX axis is the transverse stable diffusion axis of the material,the OY axis is the longitudinal gradient transport axis of the material,and the OZ axis is the vertical density cascade distribution axis of the material.When separation time (T) T=0-10 s was the period of disorderly diffusion and mixing of particles,T=10-20 s was the period of directional migration and stratification of particles,and T=20-30 s was the period of cascade distribution and separation of particles.Finally,separation experiments conducted under optimal operating parameters demonstrated that the clean coal yield was 72.02%with a sulfur content of 0.98%.
基金financially supported by the National Key R&D program(No.2022YFB3707501)the GDAS’Project of Science and Technology(No.2022GDASZH-2022010202)the Guangdong Provincial Project(Nos.2022A0505050053,2021B1515120071,and 2020B1515130007)。
文摘Austenitic stainless steels(ASSs)are widely used in various in-dustries such as aerospace,nuclear energy,food,and biotechnol-ogy owing to their exceptional combination of corrosion resistance,weldability,toughness,and formability[1,2].However,a signifi-cant drawback of ASSs is their low yield strength,which limits their applications in extreme environments[3].Grain boundary(GB)engineering plays a crucial role in enhancing the strength of ASSs[4,5].For instance,grain refinement techniques such as cold rolling followed by annealing[6],severe plastic deformation(SPD)[7],and surface mechanical attrition/rolling treatments[8,9]introduce high-angle GBs(HAGBs)into ASSs,thereby improving their strength.However,the high density of HAGBs limits their ca-pacity for dislocation storage and multiplication,leading to a sig-nificant loss of ductility[10,11].Additionally,several studies have shown that twin boundaries(TBs)can simultaneously enhance the strength,toughness,and corrosion resistance of ASSs[12,13].
基金supported by the Natural Science Foundation of Tianjin City (No.19JCYBJC17000)the National Natural Science Foundation of China (No.11905159)。
文摘A D-type photonic crystal fiber(PCF) sensor based on surface plasmon resonance(SPR) principle is designed.In order to excite the SPR effect,a gold film is plated on the open-loop channel of the sensor,the free electrons in a metal are resonated with photons.The structural parameters are fine-tuned and the sensing performance of the sensor is studied.The results show that the maximum spectral sensitivity reaches 18 000 nm/RIU in the refractive index range of 1.24—1.32,and the maximum resolution is 5.56×10^(-6) RIU.The novel structure with high sensitivity and low refractive index provides a new perspective for fluid density detection.
基金supported by National Key Research and Development Program of China(Grant No.2023YFB4605301)the National Natural Science Foundation of China(Grant No.52130506)。
文摘The z-axis-inclined 3D printing process using short carbon fiber-reinforced thermoplastic composites offers the potential for the support-free fabrication of complex structures and theoretically unlimited extension of printed components.It has emerged as a promising approach for in-orbit manufacturing of high-performance thermoplastic composite truss structures.However,extreme conditions of the space environment,such as high vacuum and fluctuating high-low temperatures,significantly alter the heat-transfer behavior during the printing process,often resulting in dimensional inaccuracies and degraded mechanical performance.Existing process optimization strategies fail to account for the coupled effects of vacuum and thermal extremes,limiting their applicability in guiding process design under varying vacuum temperature conditions.To address this gap,this study establishes a truss3D printing experimental platform with in situ temperature-monitoring capability under ground-simulated space conditions.It systematically investigates the effects of printing speed and structural geometry on the pre-bonding surface temperature and forming quality of truss structures in high-low temperature vacuum environments.This study reveals the mechanism by which processing and structural parameters affect the component performance through their influence on the pre-bonding surface temperature and dimensional accuracy.The experimental results show that under high-temperature vacuum conditions,the pre-bonding surface temperature is relatively high,resulting in good interfacial bonding.However,increasing the printing speed reduces the forming accuracy and leads to a decline in mechanical performance.In contrast,under low-temperature vacuum conditions,where the pre-bonding surface temperatures are lower,increasing the printing speed within a specific range effectively increases the surface temperature and bonding quality,thereby improving mechanical properties.Additionally,owing to frequent path transitions,the diagonal-strut truss exhibits a lower forming accuracy and pre-bonding surface temperature than the infilling truss,resulting in inferior mechanical performance in high-low temperature vacuum environments.
文摘The Global Navigation Satellite System(GNSS)has been widely adopted in numerous fields,including intelligent transportation,remote sensing,and aeronautical and astronautical engineering.As new navigation approaches,technologies,and applications continue to emerge,they attract significant global attention.Ensuring reliable positioning solutions with high accuracy,strong anti-interference capabilities,high availability and low integrity risks has become increasingly critical.
文摘In recent years,deep learning has been introduced into the field of Single-pixel imaging(SPI),garnering significant attention.However,conventional networks still exhibit limitations in preserving image details.To address this issue,we integrate Large Kernel Convolution(LKconv)into the U-Net framework,proposing an enhanced network structure named U-LKconv network,which significantly enhances the capability to recover image details even under low sampling conditions.
基金supported by the National Natural Science Foundation of China(Nos.51527805,11572220 and 41174109)
文摘Oil reservoirs with low permeability and porosity that are in the middle and late exploitation periods in China＇s onshore oil fields are mostly in the high-water-cut production stage.This stage is associated with severely non-uniform local-velocity flow profiles and dispersed-phase concentration（of oil droplets） in oil-water two-phase flow,which makes it difficult to measure water holdup in oil wells.In this study,we use an ultrasonic method based on a transmission-type sensor in oil-water two-phase flow to measure water holdup in lowvelocity and high water-cut conditions.First,we optimize the excitation frequency of the ultrasonic sensor by calculating the sensitivity of the ultrasonic field using the finite element method for multiphysics coupling.Then we calculate the change trend of sound pressure level attenuation ratio with the increase in oil holdup to verify the feasibility of the employed diameter for the ultrasonic sensor.Based on the results,we then investigate the effects of oildroplet diameter and distribution on the ultrasonic field.To further understand the measurement characteristics of the ultrasonic sensor,we perform a flow loop test on vertical upward oilwater two-phase flow and measure the responses of the optimized ultrasonic sensor.The results show that the ultrasonic sensor yields poor resolution for a dispersed oil slug in water flow（D OS/W flow）,but the resolution is favorable for dispersed oil in water flow（D O/W flow） and very fine dispersed oil in water flow（VFD O/W flow）.This research demonstrates the potential application of a pulsed-transmission ultrasonic method for measuring the fraction of individual components in oil-water two-phase flow with a low mixture velocity and high water cut.
基金Supported by China Agriculture Research System(CARS-05)National Natural Science Foundation of China(No.31260326)Personnel Training Plan of Technological Innovation of Yunnan Province(No.2012HB050)~~
文摘[Objective] This study aimed to investigate differences in phosphorus effi-ciency between two-rowed barley and multiple-rowed barley and differences in phos-phorus efficiency among various agronomic traits, and to explore the relationship be-tween agronomic traits and row type with phosphorus efficiency. [Method] Under available phosphorus mass fractions of 1.32 and 36.6 mg/kg, 172 barley varieties, including 79 two-rowed foreign barley, 22 multiple-rowed foreign barley, 58 two-rowed Chinese barley and 13 multiple-rowed Chinese barley, were selected to com-pare differences in phosphorus efficiency-related agronomic traits. Plant height, spike length, number of unfil ed grains, number of unfil ed grains, main panicle weight, to-tal panicle weight, total stem weight, weight of aerial part and heading stage were surveyed for statistical analysis. [Result] The results showed that, various agronomic traits were larger under fertilization condition than under non-fertilization condition ex-cept number of unfil ed grains and heading stage. Plant high, spike length, weight of aerial part and heading stage varied greatly under non-fertilization condition; number of fil ed grains, number of unfil ed grains and total stem weight varied greatly under fertilization condition. In two-rowed barley, plant height and number of fil ed grains of Chinese varieties were higher than those of foreign varieties, while other agronomic traits such as spike length, number of unfil ed grains, main panicle weight, total panicle weight, total stem weight, weight of aerial part and heading stage of foreign varieties were higher than those of Chinese varieties. Spike length and weight of aerial part in multiple-rowed and two-rowed foreign barley were higher than those in Chinese barley. In multiple-rowed barley, plant height, number of unfil ed grains, total panicle weight and total stem weight of foreign varieties were higher under non-fer-tilization condition and lower under fertilization condition compared with those of Chi-nese varieties; number of fil ed grains, main panicle weight and heading stage of foreign varieties were lower under non-fertilization condition and higher under fertil-ization condition compared with those of Chinese varieties. [Conclusion] Heading stage, number of fil ed grains, number of unfil ed grains and total stem weight are more sensitive to phosphorus efficiency. Multiple-rowed barley is more sensitive to phosphorus efficiency than two-rowed barley.
基金Supported by " Research on The Control Technology of Subtropical Agriculture Pollution System" Special Project of National Environment Protection Public Welfare Industry Science Research "Research on The Construction Strategy of Ecological Civilization" Development Plan Research Project of State Development and Reform Commission+1 种基金Xiangxiang " High-output and Efficient Cultivation of High Quality Rice and Processing Technology Industrialization Demonstration " in The Plan Test Site of National Science and Technology Enriching People and Developing County Special Project Action" Xiangxiang Middle and Long-term Development Plan of Modern Agriculture" of Subtropical Agriculture Ecology Institute in Chinese Academy of Science
文摘The comprehensive improvement strategy of intra-county environment pollution in the city and countryside was searched.By the research method which combined the microscopic view,the macroscopic view with the dynamic perspective,the seriousness of rural water quality,soil and atmospheric pollution in Xiangxiang,Xiangtan and the surrounding areas in Shaoshan irrigated area was revealed.The control measure which was 'four-dimensional pollution in the city and countryside'—— low-carbon-high-value agriculture and the technology innovation was proposed.The low-carbon-high-value technology innovation industrialization demonstration in three parts which included the pre-production,mid-production and post-production deep-processing of cultivation and breeding industry in the ecological cyclic agricultural garden in Shaoshan irrigated area was the driving force.We tried to propel the low-carbon ecological cultivation and breeding industry which included the paddy rice,grass,tree,medicinal herbs and pig,cow,chick,duck,fish.We wanted to relieve the structural unbalance of previous cultivation and breeding industry,'cheap grain hurting the farmers' and the short-leg problem of social-economic-ecological benefit.The results showed that the low-carbon-high-value agricultural system was a poly-generation technology system which promoted the multi-level and grading utilization,saved the energy,reduced the consumption and cleaned the production based on the ecology.
文摘Edward Hall offers us an effective means of examining cultural similarities and differences,that is the classification of high-context and low-context culture.The paper attempts to analyze a case of a Chinese refusal from the perspective of highcontext and low-context communication and explores the differences between the two types of communication.
