A new extractant 1 hexyl 4 ethyloctyl isopropylphosphonic acid (HHEOIPP or HA) in heptane was employed to extract rare earths from hydrochloric acid medium. The dependence of extraction distribution ratio on equili...A new extractant 1 hexyl 4 ethyloctyl isopropylphosphonic acid (HHEOIPP or HA) in heptane was employed to extract rare earths from hydrochloric acid medium. The dependence of extraction distribution ratio on equilibrium aqueous pH and the concentration of extractant were investigated. On the basis of slope analysis, it was proposed that two different kinds of extracted species were formed. For rare earth elements (La～Ho) the extracted species was LnA 3(HA) 3 and for heavy rare earth elements (Er～Lu) the species was LnClA 2(HA) 3. The steric hindrance plays an important role in forming the species. The extraction constants and separation factors of the adjacent rare earths were calculated too. Compared with HDEHP and HEH/EHP, HHEOIPP is a valuable extractant with high separation selectivity. The “tetrad effect” between K ex and atomic number was observed.展开更多
The polymerization of n-hexyl isocyanate(HNCO) was carried out in the presence of a novel single initiator, rare earth tris(2,6-di-tert-butyl-4-methylphenolate)[Ln(OAr)_3]. The influences of reaction conditions such a...The polymerization of n-hexyl isocyanate(HNCO) was carried out in the presence of a novel single initiator, rare earth tris(2,6-di-tert-butyl-4-methylphenolate)[Ln(OAr)_3]. The influences of reaction conditions such as the monomer concentration, the polymerization temperature and time, and the types of solvents on the polymerization of HNCO were studied. Polymerizations of phenyl, i-propyl, p-tolyl, n-butyl and n-octyl isocyanates with La(OAr)_3 were also examined.展开更多
Highly hydrophobic Di 2-ethyl hexyl phthalate（DEHP） is one of the most prevalent plasticizers in wastewaters. Since its half-life in biological treatment is around 25 days, it can be used as an efficiency indicator ...Highly hydrophobic Di 2-ethyl hexyl phthalate（DEHP） is one of the most prevalent plasticizers in wastewaters. Since its half-life in biological treatment is around 25 days, it can be used as an efficiency indicator of wastewater treatment plant for the removal of hydrophobic emerging contaminants. In this study, the performance of submerged membrane bioreactor was monitored to understand the effect of DEHP on the growth of aerobic microorganisms. The data showed that the chemical oxygen demand（COD）and ammonia concentration were detected below 10 and 1.0 mg/L, respectively for operating conditions of hydraulic retention time（HRT） = 4 and 6 hr, sludge retention time（SRT） = 140 day and sludge concentration between 11.5 and 15.8 g volatile solid（VS）/L. The removal efficiency of DEHP under these conditions was higher and ranged between 91% and 98%. Results also showed that the removal efficiency of DEHP in biological treatment depended on the concentration of sludge, as adsorption is the main mechanism of its removal. For the submerged membrane bioreactor, the pore size is the pivotal factor for DEHP removal, since it determines the amount of soluble microbial products coming out of the process. Highly assimilated microorganisms increase the biodegradation rate, as 74% of inlet DEHP was biodegraded; however, the concentration of DEHP inside sludge was beyond the discharge limit. Understanding the fate of DEHP in membrane bioreactor,which is one of the most promising and futuristic treatment process could provide replacement for conventional processes to satisfy the future stricter regulations on emerging contaminants.展开更多
The dynamic analysis and optimal design of reactive extraction are challenging due to high nonlinearity of model equations and tough decision of judging criteria. In this work, a dynamic rate-based method is developed...The dynamic analysis and optimal design of reactive extraction are challenging due to high nonlinearity of model equations and tough decision of judging criteria. In this work, a dynamic rate-based method is developed on g PROMS platform to get easy access to the solutions of reactive extraction with phase splitting. Based on rigorous criteria, dynamic analysis from initial state to final equilibrium(e.g., evolution of phase composition, mass transfer rate and reaction rate) and optimal design of operating conditions(e.g., extractant dosage and feed molar ratio) are achieved. To illustrate the method, the esterification of n-hexyl acetate is taken as an example. The approach proves to be reliable in the analysis and optimization of the exemplified system, which provides instructive reference for further process design and simulation of reactive extraction.展开更多
The extraction and stripping of scandium from its sulfate solutions by isopropyl phosphonic acid mono (1-hexyl-4-ethyl) octyl ester (PT-2, HL) diluted with n-hexane are reported. A high efficiency of separation betwee...The extraction and stripping of scandium from its sulfate solutions by isopropyl phosphonic acid mono (1-hexyl-4-ethyl) octyl ester (PT-2, HL) diluted with n-hexane are reported. A high efficiency of separation between scandium, iron and lutetium can be achieved by controlling aqueous acidity. Different mechanisms of Sc3+ with PT-2 in various acid range have been proposed.At lower aqueous acidity, it is a cation exchange reaction, while at higher acidity. a solvation reaction was ascertained. Its IR and NMR spectra have been discussed. The effect of temperature on extraction of Sc3+ was observed and thermodynamic functions were calculated.展开更多
A long chain aliphatic sulfoxide can be used as an extractant.It can extract almost all metallic ions which can be extracted by tributylphosphate (TBP).The extraction of gold was studied by Chekushin,V. S. and Mojski,...A long chain aliphatic sulfoxide can be used as an extractant.It can extract almost all metallic ions which can be extracted by tributylphosphate (TBP).The extraction of gold was studied by Chekushin,V. S. and Mojski,M.using petroleum sulfoxide and n-dioctyl sulfoxide(DOSO) as an extractant respectively.展开更多
Bis （methylcyclopentadienyl） lanthanide amido complex （MeCp） 2YbNPh2 （THF） reacted with n-hexyl isocyanate （n-nexylNCO） in 1：1 molar ratio to give {（MeC5H4）2Yb[OC（NPh2）N（n-hexyl）] }2（1）. Complex 1 was...Bis （methylcyclopentadienyl） lanthanide amido complex （MeCp） 2YbNPh2 （THF） reacted with n-hexyl isocyanate （n-nexylNCO） in 1：1 molar ratio to give {（MeC5H4）2Yb[OC（NPh2）N（n-hexyl）] }2（1）. Complex 1 was characterized by elemental analyses and X-ray diffraction. The title complex belongs to trigonal system and R-3 space group. Its unit cell parameters are a =2.9533（11） nm, b =2.9533（11） nm, c = 1.5873（6） nm, V= 11.9896（80） nm^3, Z =9, Dc= 1.562 mg·m^-3, μ = 3.536 mm^-1（Mo Kα）, F（000） =5670, R =0.034, Rw =0.064. It is a dimeric structure with two symmetrical bridged oxygen atoms. Nitrogen atom is coordinated to the ytterbium atom to form a tricyclic backbone. The coordination number of ytterbium is 9. The whole molecule shows central symmetry.展开更多
Soluble poly(3-hexyl-2,5-thienylene vinylene) (PHTV) was readily synthesized from thiophene in a yield better than that of the precursor method to prepare poly(thienylene vinylene) (PTV). The bandgap of the polymer is...Soluble poly(3-hexyl-2,5-thienylene vinylene) (PHTV) was readily synthesized from thiophene in a yield better than that of the precursor method to prepare poly(thienylene vinylene) (PTV). The bandgap of the polymer is about 1.8 eV, which is comparable with that of PTV. Owing to the introduction of alkyl side groups onto the backbone of the polymer, it can be dissolved in common organic solvents such as chloroform, THF and toluene. The synthesis of soluble PHTV is a very important approach to preventing oxidation and to improving the properties and the processbility of the PTV. The existence of alkyl side groups in PHTV does not affect its, bandgap and thermal properties as compared with PTV. After doping with FeCl3, the conductivity of PHTV is as high as 1.1 x 10(-2) S/cm. The soluble PHTV can be easily transformed into thin film with much better quality than that of the PTV film prepared by the traditional precursor method, which is very important for fabricating devices with good properties.展开更多
The title compound {4-[2-（9-hexyl-9H-carbazol-3-yl）vinyl]phenyl} dimethylamine has been synthesized by the well known Wittig reaction, and its crystal structure was determined by single-crystal X-ray diffraction ana...The title compound {4-[2-（9-hexyl-9H-carbazol-3-yl）vinyl]phenyl} dimethylamine has been synthesized by the well known Wittig reaction, and its crystal structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in monoclinic, space group P21/c with a = 47.87（2）, b = 10.222（4）, c = 9.612（4）A, β = 92.401（9）°, V = 4699（3）A^3, Z = 8, C28H32N2, Mr = 396.56, Dc = 1.121 g/cm^3, F（000） = 1712 and μ（MoKa） = 0.065 mm^-1. The final R and wR are 0.0793 and 0.1983, respectively for 3524 observed reflections with Ⅰ〉 2σ（Ⅰ）. In the title compound, the bond lengths are normal, and the crystal is stabilized by Van der Waals＇ forces.展开更多
Ⅰ. INTRODUCTION Plasma polymerization has been widely applied and extensively studied. One ofits significant characteristics is that it does not necessitate the functional groups as poly-
Cetane improvers reduce the ignition delay, which in turn reduces the combustion temperatures thereby reduce NOx emissions. Exhaust gas recirculation （EGR） proved to be an effective way to reduce the NOx emissions. ...Cetane improvers reduce the ignition delay, which in turn reduces the combustion temperatures thereby reduce NOx emissions. Exhaust gas recirculation （EGR） proved to be an effective way to reduce the NOx emissions. In this present experimental work, a combination of exhaust gas recirculation and cetane improver ethyl hexyl nitrate （EHN） is used to investigate the performance and exhaust emissions of a single cylinder four stroke naturally aspirated direct injection and air cooled diesel engine. Test results show that the brake thermal efficiency increases with the increase in the percentage of EGR which is accompanied by a reduction in brake specific fuel consumption and exhaust gas temperatures, and that bio- diesel with cetane improver under 20% EGR reduces NOx emissions by 33% when compared to baseline fuel without EGR. However carbon monoxide （CO）, hydro carbon （HC） and smoke emissions increase with an increase in percentage of EGR.展开更多
文摘A new extractant 1 hexyl 4 ethyloctyl isopropylphosphonic acid (HHEOIPP or HA) in heptane was employed to extract rare earths from hydrochloric acid medium. The dependence of extraction distribution ratio on equilibrium aqueous pH and the concentration of extractant were investigated. On the basis of slope analysis, it was proposed that two different kinds of extracted species were formed. For rare earth elements (La～Ho) the extracted species was LnA 3(HA) 3 and for heavy rare earth elements (Er～Lu) the species was LnClA 2(HA) 3. The steric hindrance plays an important role in forming the species. The extraction constants and separation factors of the adjacent rare earths were calculated too. Compared with HDEHP and HEH/EHP, HHEOIPP is a valuable extractant with high separation selectivity. The “tetrad effect” between K ex and atomic number was observed.
文摘The polymerization of n-hexyl isocyanate(HNCO) was carried out in the presence of a novel single initiator, rare earth tris(2,6-di-tert-butyl-4-methylphenolate)[Ln(OAr)_3]. The influences of reaction conditions such as the monomer concentration, the polymerization temperature and time, and the types of solvents on the polymerization of HNCO were studied. Polymerizations of phenyl, i-propyl, p-tolyl, n-butyl and n-octyl isocyanates with La(OAr)_3 were also examined.
基金the National Sciences and Engineering Research Council of Canada (NSERC Grant Number: I2IPJ 461378)
文摘Highly hydrophobic Di 2-ethyl hexyl phthalate（DEHP） is one of the most prevalent plasticizers in wastewaters. Since its half-life in biological treatment is around 25 days, it can be used as an efficiency indicator of wastewater treatment plant for the removal of hydrophobic emerging contaminants. In this study, the performance of submerged membrane bioreactor was monitored to understand the effect of DEHP on the growth of aerobic microorganisms. The data showed that the chemical oxygen demand（COD）and ammonia concentration were detected below 10 and 1.0 mg/L, respectively for operating conditions of hydraulic retention time（HRT） = 4 and 6 hr, sludge retention time（SRT） = 140 day and sludge concentration between 11.5 and 15.8 g volatile solid（VS）/L. The removal efficiency of DEHP under these conditions was higher and ranged between 91% and 98%. Results also showed that the removal efficiency of DEHP in biological treatment depended on the concentration of sludge, as adsorption is the main mechanism of its removal. For the submerged membrane bioreactor, the pore size is the pivotal factor for DEHP removal, since it determines the amount of soluble microbial products coming out of the process. Highly assimilated microorganisms increase the biodegradation rate, as 74% of inlet DEHP was biodegraded; however, the concentration of DEHP inside sludge was beyond the discharge limit. Understanding the fate of DEHP in membrane bioreactor,which is one of the most promising and futuristic treatment process could provide replacement for conventional processes to satisfy the future stricter regulations on emerging contaminants.
基金Supported by the National Natural Science Foundation of China(21776074,21576081,2181101120).
文摘The dynamic analysis and optimal design of reactive extraction are challenging due to high nonlinearity of model equations and tough decision of judging criteria. In this work, a dynamic rate-based method is developed on g PROMS platform to get easy access to the solutions of reactive extraction with phase splitting. Based on rigorous criteria, dynamic analysis from initial state to final equilibrium(e.g., evolution of phase composition, mass transfer rate and reaction rate) and optimal design of operating conditions(e.g., extractant dosage and feed molar ratio) are achieved. To illustrate the method, the esterification of n-hexyl acetate is taken as an example. The approach proves to be reliable in the analysis and optimization of the exemplified system, which provides instructive reference for further process design and simulation of reactive extraction.
文摘The extraction and stripping of scandium from its sulfate solutions by isopropyl phosphonic acid mono (1-hexyl-4-ethyl) octyl ester (PT-2, HL) diluted with n-hexane are reported. A high efficiency of separation between scandium, iron and lutetium can be achieved by controlling aqueous acidity. Different mechanisms of Sc3+ with PT-2 in various acid range have been proposed.At lower aqueous acidity, it is a cation exchange reaction, while at higher acidity. a solvation reaction was ascertained. Its IR and NMR spectra have been discussed. The effect of temperature on extraction of Sc3+ was observed and thermodynamic functions were calculated.
基金Projects supported by the Fund of National Natural Science Foundation
文摘A long chain aliphatic sulfoxide can be used as an extractant.It can extract almost all metallic ions which can be extracted by tributylphosphate (TBP).The extraction of gold was studied by Chekushin,V. S. and Mojski,M.using petroleum sulfoxide and n-dioctyl sulfoxide(DOSO) as an extractant respectively.
文摘Bis （methylcyclopentadienyl） lanthanide amido complex （MeCp） 2YbNPh2 （THF） reacted with n-hexyl isocyanate （n-nexylNCO） in 1：1 molar ratio to give {（MeC5H4）2Yb[OC（NPh2）N（n-hexyl）] }2（1）. Complex 1 was characterized by elemental analyses and X-ray diffraction. The title complex belongs to trigonal system and R-3 space group. Its unit cell parameters are a =2.9533（11） nm, b =2.9533（11） nm, c = 1.5873（6） nm, V= 11.9896（80） nm^3, Z =9, Dc= 1.562 mg·m^-3, μ = 3.536 mm^-1（Mo Kα）, F（000） =5670, R =0.034, Rw =0.064. It is a dimeric structure with two symmetrical bridged oxygen atoms. Nitrogen atom is coordinated to the ytterbium atom to form a tricyclic backbone. The coordination number of ytterbium is 9. The whole molecule shows central symmetry.
基金This work was supported by the Chinese Academy of Sciences (No. KJCX2-H1).
文摘Soluble poly(3-hexyl-2,5-thienylene vinylene) (PHTV) was readily synthesized from thiophene in a yield better than that of the precursor method to prepare poly(thienylene vinylene) (PTV). The bandgap of the polymer is about 1.8 eV, which is comparable with that of PTV. Owing to the introduction of alkyl side groups onto the backbone of the polymer, it can be dissolved in common organic solvents such as chloroform, THF and toluene. The synthesis of soluble PHTV is a very important approach to preventing oxidation and to improving the properties and the processbility of the PTV. The existence of alkyl side groups in PHTV does not affect its, bandgap and thermal properties as compared with PTV. After doping with FeCl3, the conductivity of PHTV is as high as 1.1 x 10(-2) S/cm. The soluble PHTV can be easily transformed into thin film with much better quality than that of the PTV film prepared by the traditional precursor method, which is very important for fabricating devices with good properties.
文摘The title compound {4-[2-（9-hexyl-9H-carbazol-3-yl）vinyl]phenyl} dimethylamine has been synthesized by the well known Wittig reaction, and its crystal structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in monoclinic, space group P21/c with a = 47.87（2）, b = 10.222（4）, c = 9.612（4）A, β = 92.401（9）°, V = 4699（3）A^3, Z = 8, C28H32N2, Mr = 396.56, Dc = 1.121 g/cm^3, F（000） = 1712 and μ（MoKa） = 0.065 mm^-1. The final R and wR are 0.0793 and 0.1983, respectively for 3524 observed reflections with Ⅰ〉 2σ（Ⅰ）. In the title compound, the bond lengths are normal, and the crystal is stabilized by Van der Waals＇ forces.
文摘Ⅰ. INTRODUCTION Plasma polymerization has been widely applied and extensively studied. One ofits significant characteristics is that it does not necessitate the functional groups as poly-
文摘Cetane improvers reduce the ignition delay, which in turn reduces the combustion temperatures thereby reduce NOx emissions. Exhaust gas recirculation （EGR） proved to be an effective way to reduce the NOx emissions. In this present experimental work, a combination of exhaust gas recirculation and cetane improver ethyl hexyl nitrate （EHN） is used to investigate the performance and exhaust emissions of a single cylinder four stroke naturally aspirated direct injection and air cooled diesel engine. Test results show that the brake thermal efficiency increases with the increase in the percentage of EGR which is accompanied by a reduction in brake specific fuel consumption and exhaust gas temperatures, and that bio- diesel with cetane improver under 20% EGR reduces NOx emissions by 33% when compared to baseline fuel without EGR. However carbon monoxide （CO）, hydro carbon （HC） and smoke emissions increase with an increase in percentage of EGR.
文摘以正己醇作为引发剂,分别与环氧乙烷和环氧丙烷发生聚合,再以气体三氧化硫进行硫酸化反应,合成了正己醇聚氧乙烯醚硫酸钠(HE3S)以及正己醇聚氧丙烯醚硫酸钠(HP3S)2种阴非离子型表面活性剂。采用FTIR和1H NMR技术对表面活性剂结构进行了表征。通过平衡表面张力、动态表面张力和动态接触角研究了其水溶液的表面活性。实验结果表明,HE3S和HP3S在298 K下的临界胶束浓度分别为58.36 mmol/L和53.84 mmol/L,最低表面张力分别为33.91 m N/m和33.29 m N/m;由动态表面张力计算出的扩散系数,可知两种表面活性剂在水溶液中的吸附机理均属于混合动力控制吸附;当溶液浓度为150 mmol/L时,HE3S和HP3S的水溶液液滴在石蜡膜上可以短时间内快速铺展,其最低接触角分别达到64.5°和55.9°。
