The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,mate...The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,material strength dictates the resistance to plastic deformation and flow,a contrast to the shockwave-dominated interactions where compressibility is key.This paper presents a self-consistent compressible penetration theory that considers both the axial penetration and radial crater growth of shaped charge jets into targets.An integrated approach where the axial and radial dynamics are coupled has been proposed,influencing each other through shared physical principles rather than being treated as separate,empirically linked phenomena.The presented theory is rooted in the compressible Bernoulli equation and the linear Rankine-Hugoniot relation.These foundational equations are employed to accurately model the high-pressure shock state and subsequent material flow at the jet-target interface,providing a robust physical basis for the penetration model.Notably,it considers the target material's compressibility,which elevates the pressure at the jet-target interface beyond that observed with incompressible materials.This pressure increase is directly proportional to the target's degree of compressibility.As such,this model of compressible penetration reorients the analytical approach:rather than merely estimating penetration resistance,it determines this value from the target material's specific compressibility and yield strength.This shift from empirical correlations to a physics-based derivation of penetration resistance enhances the model's predictive power,particularly for novel target materials or engagement conditions outside established experimental datasets.This investigation establishes a quantitative link between the material's yield strength and its penetration resistance.The accuracy of this penetration resistance value is paramount,as it significantly influences the predicted crater diameter;indeed,the crater diameter's sensitivity to this resistance underscores the necessity for its precise determination.Ultimately,by integrating the yield strength of the target material,this framework enables the prediction of both the penetration depth and the resultant crater diameter from a shaped charge jet.The theory's validation involved two experimental sets:the first focused on shaped charge jet penetration into 45#steel at varied stand-offs,while the second utilized targets of high-to ultrahigh-strength steel-fiber reactive powder concrete(RPC)with differing strength characteristics.These experimental campaigns were specifically chosen to test the theory against both ductile metallic alloys,where plastic flow is significant,and advanced quasi-brittle cementitious composites,presenting a broad spectrum of material responses and penetration challenges.Resulting hole profiles derived from theoretical calculations demonstrated a strong correspondence with empirical measurements for both material types.展开更多
Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show ...Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.展开更多
Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of sh...Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of shaped charge jets in water as well as the underwater penetration effect of concrete need to be studied.In this paper,we introduced a modified forming theory of an underwater hemispherical shaped charge,and investigated the behavior of jet formation and concrete penetration in both air and water experimentally and numerically.The results show that the modified jet forming theory predicts the jet velocity of the hemispherical liner with an error of less than 10%.The underwater jets exhibit at least 3%faster and 11%longer than those in air.Concrete shows different failure modes after penetration in air and water.The depth of penetration deepens at least 18.75%after underwater penetration,accompanied by deeper crater with 65%smaller radius.Moreover,cracks throughout the entire target are formed,whereas cracks exist only near the penetration hole in air.This comprehensive study provides guidance for optimizing the structure of shaped charge and improves the understanding of the permeability effect of concrete in water.展开更多
The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure ...The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.展开更多
The attosecond extreme ultraviolet(XUV) pulse pump and femtosecond infrared(IR) pulse probe scheme is commonly used to study the dynamics and attosecond transient absorption(ATA) spectra of microscopic systems. In a r...The attosecond extreme ultraviolet(XUV) pulse pump and femtosecond infrared(IR) pulse probe scheme is commonly used to study the dynamics and attosecond transient absorption(ATA) spectra of microscopic systems. In a recent report [Proc. Natl. Acad. Sci. USA 121 e2307836121(2024)], we showed that shaped XUV pulses with spectral minima can significantly alter the absorption line shape of helium's 2s2p doubly excited state within a few tens of attoseconds.However, it remains unclear if similar effects could be observed in a singly excited state. In this study, we use shaped XUV pulses to excite helium's 2p singly excited state and couple the 2p and 3d states with a delayed IR pulse. Comparing these results with those from Gaussian XUV pulses, we find that the ATA spectra for the shaped XUV pulses exhibit more pronounced changes with delay, while the changes for the Gaussian pulses are gradual. We also explain these differences through population changes and analytical models. Our findings show that shaped XUV pulses can regulate the dynamics and absorption spectra of a singly excited state.展开更多
In this study,the potential application of shaped charge jets as transient antennas for electromagnetic signal transmission was explored and an electromagnetic pulse radiation system with a shaped charge jet as a tran...In this study,the potential application of shaped charge jets as transient antennas for electromagnetic signal transmission was explored and an electromagnetic pulse radiation system with a shaped charge jet as a transient antenna was proposed.During the research,crucial characteristics of the transient antenna formed by a shaped charge with a 30 mm diameter,such as resonant frequency,radiation pattern,and radiation efficiency,were evaluated.The typical shaped charge jet morphology was obtained based on the simulations,in which it could insight the dynamic behavior of the shaped charge jet selected.An equivalent model experiment was employed to test the radiation efficiency,and it showed that a shorting pin loading method could increase the relative bandwidth of the jet antenna to 32.8%,and the experimental results correlate with the theoretical predictions for half-wave dipole antennas reasonably well.Additionally,variations in the diameter of the shaped charge jet were found to affect the input impedance and impedance bandwidth,while the length of the jet influenced the resonant frequency of the antenna.This suggests that altering these parameters can achieve reconfigurability of the jet antenna.展开更多
The impact of high-velocity penetrators into liquid-filled containers can generate hydrodynamic ram effects,potentially causing catastrophic structural damage to the container.Previous studies have primarily focused o...The impact of high-velocity penetrators into liquid-filled containers can generate hydrodynamic ram effects,potentially causing catastrophic structural damage to the container.Previous studies have primarily focused on undeformed penetrators,such as fragments or bullets,with limited attention directed toward shaped charge jets.This study investigates the penetration characteristics of shaped charge jets impacting behind-armor liquid-filled containers,with particular emphasis on jet-liquid interactions.A theoretical penetration model incorporating material compressibility and jet stretching was developed based on the virtual origin theory.A high-speed imaging experimental system was designed to capture the jet motion within the container.The impact process was numerically reproduced using ANSYS/LSDYNA,and the effects of standoff and overmatch on jet penetration were analyzed.The results reveal that jet stretching induced by increased standoff enhances the penetration velocity of the jet.A proportional relationship between the stretching factor(λ)and the overmatch parameter(I)was identified,withλranging from approximately 1.22 to 1.38 times I across the studied standoff range(80-220 mm).The findings offer a basis for future studies on the pressure distribution in the liquid and the structural response of containers.展开更多
An analysis of the interaction mechanisms between a Shaped Charge Jet(SCJ) and a single Moving Plate(MP) is proposed in this article using both experimental and numerical approaches. First, an experimental set-up is p...An analysis of the interaction mechanisms between a Shaped Charge Jet(SCJ) and a single Moving Plate(MP) is proposed in this article using both experimental and numerical approaches. First, an experimental set-up is presented. Four collision tests have been performed: two tests in Backward Moving Plate(BMP) configuration, where the plate moves in opposition to jet, and two tests in Forward Moving Plate(FMP) configuration, where the plate moves alongside the jet. Based on the virtual origin approximation,a methodology(the Virtual Origin Method, VOM) is developed to extract quantities from the X-ray images, which serve as comparative data. γSPH simulations are carried out to complete the analysis, as they well capture the disturbance dynamics observed in the experiments. Based on these complementary experimental and numerical results, a new physical description is proposed through a detailed analysis of the interaction. It is shown that the SCJ/MP interaction is driven at first order by the contact geometry. Thus, BMP and FMP configurations do not generate the same disturbances because their local flow geometries are different. In the collision point frame of reference, the BMP flows in the same direction as the jet, causing its overall deflection. On the contrary, the FMP flow opposes that of the jet leading to an alternative creation of fragments and ligaments. An in-depth study, using the VOM shows that deflection angles, fragment-ligament creation frequencies, and deflection velocities evolve as the interaction progresses through slower jet elements.展开更多
In recent years,the demand for synchronous acquisition of three-dimensional(3D)shape and col-or texture has surged in fields such as cultural heritage preservation and healthcare.Addressing this need,this paper propos...In recent years,the demand for synchronous acquisition of three-dimensional(3D)shape and col-or texture has surged in fields such as cultural heritage preservation and healthcare.Addressing this need,this paper proposes a novel method for simultaneous 3D shape and color texture capture.First,a linear model correlating camera exposure time with grayscale values is established.Through exposure time calibration,the projected red,green and blue(RGB)light and white-light grayscale values captured by a monochrome cam-era are aligned.Then,three sets of color fringes are projected onto the object to identify optimal pixels for 3D reconstruction.And,three pure-color patterns are projected to synthesize the color texture.Experimental res-ults show that this method effectively achieves synchronous 3D shape and color texture acquisition,offering high speed and precision,and avoids color crosstalk interference common in 3D reconstruction of colored ob-jects using a monochrome camera.展开更多
The Explosive Reactive Armors(ERA)are really efficient at reducing Shaped Charge Jet(SCJ)performance.The main destabilizing mechanism is the transverse movement of the front and rear moving plates(MP)on the SCJ.Theref...The Explosive Reactive Armors(ERA)are really efficient at reducing Shaped Charge Jet(SCJ)performance.The main destabilizing mechanism is the transverse movement of the front and rear moving plates(MP)on the SCJ.Therefore,a good understanding of the interaction SCJ/MP is essential for improving both weapon and armor systems.In a previous article,we have shown that interaction regimes are mainly influenced by the local collision geometry.Thus,in the collision point frame,the angle of collision be-tween the continuous SCJ and the MP is a key parameter.This flow angle is acute for the Backward Moving plate(BMP)moving against the SCJ and obtuse for the Forward Moving Plate(FMP)moving alongside it.In the former,the jet is simply deflected,which is the regime 1 of deflection.In the latter,the interaction turns on an alternative creation of fragment and ligament,which is the regime 2.Fragments are parts of the jet that are only slightly deflected while ligaments are the curved material bridges that connect two consecutive fragments.When stretching,the jet is systematically subject to instabilities that disturb its surface,creating necks along it.Their growth finally leads to the jet fragmentation.In this article,we focus on this jet distur-bance and its consequences on the SCJ/MP interaction.An experimental set-up was built to implement the interaction between a SCJ and a moving plate for different collision points,at different stand-off distances.The plate can interact with a smooth SCJ or a disturbed SCJ at a close and a far stand-off distance,respectively.One of the main results is the visualization of a regime change in SCJ/BMP interaction.A regime 1(deflection)interaction changes into a ligament regime interaction(similar to a FMP regime 2)when the collision point stand-off is increased.It is proposed that this change can be attributed as the increase of the amplitude of the jet surface disturbances.This phenomenon is well captured by the gSPH simula-tions.Finally,using both experimental and numerical approaches,we propose a new detailed analysis of the different phenomena occurring during the interaction between a disturbed-surface jet and a moving plate.Interaction regime changes are linked to jet local geometry changes.The interactions of a BMP with a smooth SCJ or with a disturbed surface SCJ are geometrically not the same and,thus,generate different local flows and interaction mechanisms.However,some other simulations have been carried out with constant velocity jet whose surface has been previously disturbed.These simulations underline the influence of both disturbance wavelength l and amplitude A on the interaction regimes.Surface disturbances of the SCJ,linked to its stretching,have a major influence on its interaction with a moving plate.展开更多
Compressed air energy storage(CAES)caverns transformed from horseshoe-shaped roadways in abandoned coal mines still face unclear mechanisms of force transfer,especially in the presence of initial damage in the surroun...Compressed air energy storage(CAES)caverns transformed from horseshoe-shaped roadways in abandoned coal mines still face unclear mechanisms of force transfer,especially in the presence of initial damage in the surrounding rock.The shape and size of the initial damage area as well as their effect on cavern stability remain unclear.Due to the complex geometry and multiphysical couplings,traditional numerical algorithms encounter problems of nonconvergence and low accuracy.These challenges can be addressed through numerical simulations with robust convergence and high accuracy.In this study,the damage area shapes of a CAES cavern are first computed using the concept of damage levels.Then,an iteration algorithm is improved using the generalization a method through the error control and one-way coupling loop for fully coupling equations.Finally,the stability of the CAES cavern with different damage zone shapes is numerically simulated in the thermodynamic process.It is found that this improved algorithm can greatly enhance numerical convergence and accuracy.The nonuniformity of the elastic modulus has a significant impact on the mechanical responses of the CAES cavern.The cavern shape with different damage zones has significant impacts on cavern stability.The initial damage area can delay the responses of temperature and stress.It induces variations of temperature in the range of approximately 1.2 m and variations of stress in the range of 1.5 m from the damage area.展开更多
A scheme based on irregular V-shaped silicon nanoantennas is proposed to optimize transverse unidirectional scattering under plane wave irradiation.Traditional methods of designing regular shapes offer fewer parameter...A scheme based on irregular V-shaped silicon nanoantennas is proposed to optimize transverse unidirectional scattering under plane wave irradiation.Traditional methods of designing regular shapes offer fewer parameters and higher search efficiency.However,due to the limitations of regular shapes,it is challenging to meet high-precision design requirements.Irregular shape design allows for a broader range of adjustments,but the complexity of shape parameters leads to lower search efficiency and a higher likelihood of converging to local optima.展开更多
BACKGROUND Acute myocardial infarction(AMI)is a major cause of mortality worldwide.The stress hyperglycemia ratio(SHR),which integrates glucose and glycated hemoglobin A1c levels,better reflects acute metabolic stress...BACKGROUND Acute myocardial infarction(AMI)is a major cause of mortality worldwide.The stress hyperglycemia ratio(SHR),which integrates glucose and glycated hemoglobin A1c levels,better reflects acute metabolic stress.This study assessed the SHR and longterm prognosis of patients with AMI.METHODS This study was a post-hoc analysis based on the prospective,multicenter OPTIMAL registry(http://www.clinicaltrials.gov,NCT number:NCT03084991).A total of 3384 consecutive patients who underwent percutaneous coronary intervention(PCI)at Department of Cardiology,The 2nd Affiliated Hospital of Harbin Medical University,Harbin,China were included in the present analysis after exclusions.Patients were stratified into quartiles according to the SHR.The primary endpoint was cardiovascular death,with all-cause death and major adverse cardiovascular events as secondary endpoints.The median follow-up duration was 24.1 months,with a completion rate of 99.5%.RESULTS Kaplan-Meier survival curves showed progressively worse survival across SHR quartiles(log-rank P<0.001),with patients in Q4(SHR≥1.34)experiencing the highest risk.Multivariate Cox regression analysis confirmed that the SHR was an independent predictor of cardiovascular death[hazard ratio(HR)=1.56],all-cause death(HR=1.48),and major adverse cardiovascular events(HR=1.34)for Q4(SHR≥1.34)versus Q2(SHR:0.93–1.11).Restricted cubic spline analysis revealed a J-shaped association between SHR and outcomes,with the lowest risk observed at an SHR of approximately 1.0.CONCLUSIONS The SHR is an independent predictor of long-term adverse outcomes in patients with AMI undergoing PCI,supporting its use for early risk stratification and glycemic management.展开更多
In the past few years,efforts have been made to extend the sensitivity of surface nuclear magnetic resonance(SNMR)to short relaxation times,typical for strongly bound water,which,for example,occurs in partially satura...In the past few years,efforts have been made to extend the sensitivity of surface nuclear magnetic resonance(SNMR)to short relaxation times,typical for strongly bound water,which,for example,occurs in partially saturated soils.The two limiting factors for the sensitivity are the dead time after the excitation pulse and the duration of the pulse itself.To enable short pulses,while also achieving proper depths of investigation,high pulse amplitudes are needed.This makes it necessary to consider the Bloch-Siegert effect,i.e.the counter-rotating component and the parallel component of the excitation field have significant influence on the excitation.If an untuned transmitter circuit is used,the pulse shape will also be non-sinusoidal.In this paper,we demonstrate that this influences SNMR measurements with short pulses in two ways:On one hand,the pulse shape influences the phase of the fundamental frequency oscillation.On the other,at very high pulse amplitudes,other frequency components of the excitation field start to influence the excitation.The behavior of the macroscopic magnetizations in the subsurface during the pulse is simulated by solving the Bloch equations,using the pulse shape as an input.Since these calculations are computational expensive,we propose a lookup scheme that allows a time efficient modeling of the obtained SNMR data.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicate...Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.展开更多
Based on experiments, a computer program is developed. The calculated results agree well with the experimental results. The flexural behavior of T shaped high strength concrete members subjected to axial compression ...Based on experiments, a computer program is developed. The calculated results agree well with the experimental results. The flexural behavior of T shaped high strength concrete members subjected to axial compression and biaxial bending is studied. The main factors affecting the flexural behavior of T shaped high strength concrete members are loading angle, axial compression ratio and reinforcement ratio.展开更多
An investigation on the ventral diverterless high offset S-shaped inlet is carried out at Mach numbers from 0.600 to 1.534, angles of attack from -4° to 9.4°, and yaw angles from 0° to 8°. Results ...An investigation on the ventral diverterless high offset S-shaped inlet is carried out at Mach numbers from 0.600 to 1.534, angles of attack from -4° to 9.4°, and yaw angles from 0° to 8°. Results indicate： （1） a large region of low total pressure exists at the lower part of the inlet exit caused by the counter-rotating vortices in the S-shaped duct; （2） the performances of the inlet at Mach number 1.000 reach almost the highest, so the propulsion system could work efficiently in terms of aerodynamics; （3） the total pressure recovery increases slowly at first and then remains unvaried as the Mach number rises from 0.6 to 1.0, however, it does in an opposite manner in the conventional diverter-equipped S-shaped inlet; （4） the performances of the inlet are generally insensitive to angles of attack from -4° to 9.4° and yaw angles from 0° to 8° at Mach number 0.850, and angles of attack from -2° to 6° and yaw angles from 0° to 5° at Mach number 1.534.展开更多
基金the Fundamental Research Funds for the Central Universities of Nanjing University of Science and Technology(CN)under Grant No.30924010803。
文摘The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,material strength dictates the resistance to plastic deformation and flow,a contrast to the shockwave-dominated interactions where compressibility is key.This paper presents a self-consistent compressible penetration theory that considers both the axial penetration and radial crater growth of shaped charge jets into targets.An integrated approach where the axial and radial dynamics are coupled has been proposed,influencing each other through shared physical principles rather than being treated as separate,empirically linked phenomena.The presented theory is rooted in the compressible Bernoulli equation and the linear Rankine-Hugoniot relation.These foundational equations are employed to accurately model the high-pressure shock state and subsequent material flow at the jet-target interface,providing a robust physical basis for the penetration model.Notably,it considers the target material's compressibility,which elevates the pressure at the jet-target interface beyond that observed with incompressible materials.This pressure increase is directly proportional to the target's degree of compressibility.As such,this model of compressible penetration reorients the analytical approach:rather than merely estimating penetration resistance,it determines this value from the target material's specific compressibility and yield strength.This shift from empirical correlations to a physics-based derivation of penetration resistance enhances the model's predictive power,particularly for novel target materials or engagement conditions outside established experimental datasets.This investigation establishes a quantitative link between the material's yield strength and its penetration resistance.The accuracy of this penetration resistance value is paramount,as it significantly influences the predicted crater diameter;indeed,the crater diameter's sensitivity to this resistance underscores the necessity for its precise determination.Ultimately,by integrating the yield strength of the target material,this framework enables the prediction of both the penetration depth and the resultant crater diameter from a shaped charge jet.The theory's validation involved two experimental sets:the first focused on shaped charge jet penetration into 45#steel at varied stand-offs,while the second utilized targets of high-to ultrahigh-strength steel-fiber reactive powder concrete(RPC)with differing strength characteristics.These experimental campaigns were specifically chosen to test the theory against both ductile metallic alloys,where plastic flow is significant,and advanced quasi-brittle cementitious composites,presenting a broad spectrum of material responses and penetration challenges.Resulting hole profiles derived from theoretical calculations demonstrated a strong correspondence with empirical measurements for both material types.
基金funded by the National Natural Science Founda-tion of China(52071109).
文摘Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.
基金supported by the National Science Foundation of China(Grant Nos.12372361,12102427,12372335 and 12102202)the Fundamental Research Funds for the Central Universities(Grant No.30923010908)Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX23_0520).
文摘Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of shaped charge jets in water as well as the underwater penetration effect of concrete need to be studied.In this paper,we introduced a modified forming theory of an underwater hemispherical shaped charge,and investigated the behavior of jet formation and concrete penetration in both air and water experimentally and numerically.The results show that the modified jet forming theory predicts the jet velocity of the hemispherical liner with an error of less than 10%.The underwater jets exhibit at least 3%faster and 11%longer than those in air.Concrete shows different failure modes after penetration in air and water.The depth of penetration deepens at least 18.75%after underwater penetration,accompanied by deeper crater with 65%smaller radius.Moreover,cracks throughout the entire target are formed,whereas cracks exist only near the penetration hole in air.This comprehensive study provides guidance for optimizing the structure of shaped charge and improves the understanding of the permeability effect of concrete in water.
基金financial support from the National Natural Science Foundation of China(Grant No.11572159).
文摘The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.
基金Project supported by the National Natural Science Foundation of China (Grant No. 12274230)the Funding of Nanjing University of Science and Technology (Grant No. TSXK2022D005)。
文摘The attosecond extreme ultraviolet(XUV) pulse pump and femtosecond infrared(IR) pulse probe scheme is commonly used to study the dynamics and attosecond transient absorption(ATA) spectra of microscopic systems. In a recent report [Proc. Natl. Acad. Sci. USA 121 e2307836121(2024)], we showed that shaped XUV pulses with spectral minima can significantly alter the absorption line shape of helium's 2s2p doubly excited state within a few tens of attoseconds.However, it remains unclear if similar effects could be observed in a singly excited state. In this study, we use shaped XUV pulses to excite helium's 2p singly excited state and couple the 2p and 3d states with a delayed IR pulse. Comparing these results with those from Gaussian XUV pulses, we find that the ATA spectra for the shaped XUV pulses exhibit more pronounced changes with delay, while the changes for the Gaussian pulses are gradual. We also explain these differences through population changes and analytical models. Our findings show that shaped XUV pulses can regulate the dynamics and absorption spectra of a singly excited state.
基金supported by the"Fundamental Research Funds for the Central Universities"(Grant No.30924010801).
文摘In this study,the potential application of shaped charge jets as transient antennas for electromagnetic signal transmission was explored and an electromagnetic pulse radiation system with a shaped charge jet as a transient antenna was proposed.During the research,crucial characteristics of the transient antenna formed by a shaped charge with a 30 mm diameter,such as resonant frequency,radiation pattern,and radiation efficiency,were evaluated.The typical shaped charge jet morphology was obtained based on the simulations,in which it could insight the dynamic behavior of the shaped charge jet selected.An equivalent model experiment was employed to test the radiation efficiency,and it showed that a shorting pin loading method could increase the relative bandwidth of the jet antenna to 32.8%,and the experimental results correlate with the theoretical predictions for half-wave dipole antennas reasonably well.Additionally,variations in the diameter of the shaped charge jet were found to affect the input impedance and impedance bandwidth,while the length of the jet influenced the resonant frequency of the antenna.This suggests that altering these parameters can achieve reconfigurability of the jet antenna.
基金the financial support from the National Natural Science Foundation of China(Grant No.11572159)。
文摘The impact of high-velocity penetrators into liquid-filled containers can generate hydrodynamic ram effects,potentially causing catastrophic structural damage to the container.Previous studies have primarily focused on undeformed penetrators,such as fragments or bullets,with limited attention directed toward shaped charge jets.This study investigates the penetration characteristics of shaped charge jets impacting behind-armor liquid-filled containers,with particular emphasis on jet-liquid interactions.A theoretical penetration model incorporating material compressibility and jet stretching was developed based on the virtual origin theory.A high-speed imaging experimental system was designed to capture the jet motion within the container.The impact process was numerically reproduced using ANSYS/LSDYNA,and the effects of standoff and overmatch on jet penetration were analyzed.The results reveal that jet stretching induced by increased standoff enhances the penetration velocity of the jet.A proportional relationship between the stretching factor(λ)and the overmatch parameter(I)was identified,withλranging from approximately 1.22 to 1.38 times I across the studied standoff range(80-220 mm).The findings offer a basis for future studies on the pressure distribution in the liquid and the structural response of containers.
基金supported by the Ministère des Armées,and the Agence de l'Innovation de Défense(AID).
文摘An analysis of the interaction mechanisms between a Shaped Charge Jet(SCJ) and a single Moving Plate(MP) is proposed in this article using both experimental and numerical approaches. First, an experimental set-up is presented. Four collision tests have been performed: two tests in Backward Moving Plate(BMP) configuration, where the plate moves in opposition to jet, and two tests in Forward Moving Plate(FMP) configuration, where the plate moves alongside the jet. Based on the virtual origin approximation,a methodology(the Virtual Origin Method, VOM) is developed to extract quantities from the X-ray images, which serve as comparative data. γSPH simulations are carried out to complete the analysis, as they well capture the disturbance dynamics observed in the experiments. Based on these complementary experimental and numerical results, a new physical description is proposed through a detailed analysis of the interaction. It is shown that the SCJ/MP interaction is driven at first order by the contact geometry. Thus, BMP and FMP configurations do not generate the same disturbances because their local flow geometries are different. In the collision point frame of reference, the BMP flows in the same direction as the jet, causing its overall deflection. On the contrary, the FMP flow opposes that of the jet leading to an alternative creation of fragments and ligaments. An in-depth study, using the VOM shows that deflection angles, fragment-ligament creation frequencies, and deflection velocities evolve as the interaction progresses through slower jet elements.
文摘In recent years,the demand for synchronous acquisition of three-dimensional(3D)shape and col-or texture has surged in fields such as cultural heritage preservation and healthcare.Addressing this need,this paper proposes a novel method for simultaneous 3D shape and color texture capture.First,a linear model correlating camera exposure time with grayscale values is established.Through exposure time calibration,the projected red,green and blue(RGB)light and white-light grayscale values captured by a monochrome cam-era are aligned.Then,three sets of color fringes are projected onto the object to identify optimal pixels for 3D reconstruction.And,three pure-color patterns are projected to synthesize the color texture.Experimental res-ults show that this method effectively achieves synchronous 3D shape and color texture acquisition,offering high speed and precision,and avoids color crosstalk interference common in 3D reconstruction of colored ob-jects using a monochrome camera.
基金supported by the Ministère des Arméesthe Agence de l'Innovation de Défense (AID)
文摘The Explosive Reactive Armors(ERA)are really efficient at reducing Shaped Charge Jet(SCJ)performance.The main destabilizing mechanism is the transverse movement of the front and rear moving plates(MP)on the SCJ.Therefore,a good understanding of the interaction SCJ/MP is essential for improving both weapon and armor systems.In a previous article,we have shown that interaction regimes are mainly influenced by the local collision geometry.Thus,in the collision point frame,the angle of collision be-tween the continuous SCJ and the MP is a key parameter.This flow angle is acute for the Backward Moving plate(BMP)moving against the SCJ and obtuse for the Forward Moving Plate(FMP)moving alongside it.In the former,the jet is simply deflected,which is the regime 1 of deflection.In the latter,the interaction turns on an alternative creation of fragment and ligament,which is the regime 2.Fragments are parts of the jet that are only slightly deflected while ligaments are the curved material bridges that connect two consecutive fragments.When stretching,the jet is systematically subject to instabilities that disturb its surface,creating necks along it.Their growth finally leads to the jet fragmentation.In this article,we focus on this jet distur-bance and its consequences on the SCJ/MP interaction.An experimental set-up was built to implement the interaction between a SCJ and a moving plate for different collision points,at different stand-off distances.The plate can interact with a smooth SCJ or a disturbed SCJ at a close and a far stand-off distance,respectively.One of the main results is the visualization of a regime change in SCJ/BMP interaction.A regime 1(deflection)interaction changes into a ligament regime interaction(similar to a FMP regime 2)when the collision point stand-off is increased.It is proposed that this change can be attributed as the increase of the amplitude of the jet surface disturbances.This phenomenon is well captured by the gSPH simula-tions.Finally,using both experimental and numerical approaches,we propose a new detailed analysis of the different phenomena occurring during the interaction between a disturbed-surface jet and a moving plate.Interaction regime changes are linked to jet local geometry changes.The interactions of a BMP with a smooth SCJ or with a disturbed surface SCJ are geometrically not the same and,thus,generate different local flows and interaction mechanisms.However,some other simulations have been carried out with constant velocity jet whose surface has been previously disturbed.These simulations underline the influence of both disturbance wavelength l and amplitude A on the interaction regimes.Surface disturbances of the SCJ,linked to its stretching,have a major influence on its interaction with a moving plate.
基金National Key Research and Development Program of China,Grant/Award Number:2022YFE0129100National Natural Science Foundation of China,Grant/Award Number:51674246+1 种基金Graduate Innovation Program of China University of Mining and Technology,Grant/Award Number:2023WLJCRCZL046Postgraduate Research&Practice Innovation Program of Jiangsu Province,Grant/Award Number:KYCX23_2660。
文摘Compressed air energy storage(CAES)caverns transformed from horseshoe-shaped roadways in abandoned coal mines still face unclear mechanisms of force transfer,especially in the presence of initial damage in the surrounding rock.The shape and size of the initial damage area as well as their effect on cavern stability remain unclear.Due to the complex geometry and multiphysical couplings,traditional numerical algorithms encounter problems of nonconvergence and low accuracy.These challenges can be addressed through numerical simulations with robust convergence and high accuracy.In this study,the damage area shapes of a CAES cavern are first computed using the concept of damage levels.Then,an iteration algorithm is improved using the generalization a method through the error control and one-way coupling loop for fully coupling equations.Finally,the stability of the CAES cavern with different damage zone shapes is numerically simulated in the thermodynamic process.It is found that this improved algorithm can greatly enhance numerical convergence and accuracy.The nonuniformity of the elastic modulus has a significant impact on the mechanical responses of the CAES cavern.The cavern shape with different damage zones has significant impacts on cavern stability.The initial damage area can delay the responses of temperature and stress.It induces variations of temperature in the range of approximately 1.2 m and variations of stress in the range of 1.5 m from the damage area.
基金supported by the National Natural Science Foundation of China(Nos.62475121 and 62335012)。
文摘A scheme based on irregular V-shaped silicon nanoantennas is proposed to optimize transverse unidirectional scattering under plane wave irradiation.Traditional methods of designing regular shapes offer fewer parameters and higher search efficiency.However,due to the limitations of regular shapes,it is challenging to meet high-precision design requirements.Irregular shape design allows for a broader range of adjustments,but the complexity of shape parameters leads to lower search efficiency and a higher likelihood of converging to local optima.
基金supported by the National Natural Science Foundation of China(No.62135002)the Key Research and Development Program of Heilongjiang Province(No.2022ZX01A28).
文摘BACKGROUND Acute myocardial infarction(AMI)is a major cause of mortality worldwide.The stress hyperglycemia ratio(SHR),which integrates glucose and glycated hemoglobin A1c levels,better reflects acute metabolic stress.This study assessed the SHR and longterm prognosis of patients with AMI.METHODS This study was a post-hoc analysis based on the prospective,multicenter OPTIMAL registry(http://www.clinicaltrials.gov,NCT number:NCT03084991).A total of 3384 consecutive patients who underwent percutaneous coronary intervention(PCI)at Department of Cardiology,The 2nd Affiliated Hospital of Harbin Medical University,Harbin,China were included in the present analysis after exclusions.Patients were stratified into quartiles according to the SHR.The primary endpoint was cardiovascular death,with all-cause death and major adverse cardiovascular events as secondary endpoints.The median follow-up duration was 24.1 months,with a completion rate of 99.5%.RESULTS Kaplan-Meier survival curves showed progressively worse survival across SHR quartiles(log-rank P<0.001),with patients in Q4(SHR≥1.34)experiencing the highest risk.Multivariate Cox regression analysis confirmed that the SHR was an independent predictor of cardiovascular death[hazard ratio(HR)=1.56],all-cause death(HR=1.48),and major adverse cardiovascular events(HR=1.34)for Q4(SHR≥1.34)versus Q2(SHR:0.93–1.11).Restricted cubic spline analysis revealed a J-shaped association between SHR and outcomes,with the lowest risk observed at an SHR of approximately 1.0.CONCLUSIONS The SHR is an independent predictor of long-term adverse outcomes in patients with AMI undergoing PCI,supporting its use for early risk stratification and glycemic management.
基金funded by the German Research Foundation(Deutsche Forschungsgemeinschaft-DFG)under grant MU 3318/8-1.
文摘In the past few years,efforts have been made to extend the sensitivity of surface nuclear magnetic resonance(SNMR)to short relaxation times,typical for strongly bound water,which,for example,occurs in partially saturated soils.The two limiting factors for the sensitivity are the dead time after the excitation pulse and the duration of the pulse itself.To enable short pulses,while also achieving proper depths of investigation,high pulse amplitudes are needed.This makes it necessary to consider the Bloch-Siegert effect,i.e.the counter-rotating component and the parallel component of the excitation field have significant influence on the excitation.If an untuned transmitter circuit is used,the pulse shape will also be non-sinusoidal.In this paper,we demonstrate that this influences SNMR measurements with short pulses in two ways:On one hand,the pulse shape influences the phase of the fundamental frequency oscillation.On the other,at very high pulse amplitudes,other frequency components of the excitation field start to influence the excitation.The behavior of the macroscopic magnetizations in the subsurface during the pulse is simulated by solving the Bloch equations,using the pulse shape as an input.Since these calculations are computational expensive,we propose a lookup scheme that allows a time efficient modeling of the obtained SNMR data.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
基金Project supported by the Basic Science Research Program through the National Research Foundation(NRF)of Korea funded by the Ministry of Science and ICT(No.RS-2024-00337001)。
文摘Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.
文摘Based on experiments, a computer program is developed. The calculated results agree well with the experimental results. The flexural behavior of T shaped high strength concrete members subjected to axial compression and biaxial bending is studied. The main factors affecting the flexural behavior of T shaped high strength concrete members are loading angle, axial compression ratio and reinforcement ratio.
基金National Basic Research Program of China (5130802)
文摘An investigation on the ventral diverterless high offset S-shaped inlet is carried out at Mach numbers from 0.600 to 1.534, angles of attack from -4° to 9.4°, and yaw angles from 0° to 8°. Results indicate： （1） a large region of low total pressure exists at the lower part of the inlet exit caused by the counter-rotating vortices in the S-shaped duct; （2） the performances of the inlet at Mach number 1.000 reach almost the highest, so the propulsion system could work efficiently in terms of aerodynamics; （3） the total pressure recovery increases slowly at first and then remains unvaried as the Mach number rises from 0.6 to 1.0, however, it does in an opposite manner in the conventional diverter-equipped S-shaped inlet; （4） the performances of the inlet are generally insensitive to angles of attack from -4° to 9.4° and yaw angles from 0° to 8° at Mach number 0.850, and angles of attack from -2° to 6° and yaw angles from 0° to 5° at Mach number 1.534.
