The development of efficient and clean heating technologies is crucial for reducing carbon emissions in regions with severe cold regions.This research designs a novel two-stage phase change heat storage coupled solar-...The development of efficient and clean heating technologies is crucial for reducing carbon emissions in regions with severe cold regions.This research designs a novel two-stage phase change heat storage coupled solar-air source heat pump heating system structure that is specifically designed for such regions.The two-stage heat storage device in this heating system expands the storage temperature range of solar heat.The utilization of the two-stage heat storage device not onlymakes up for the instability of the solar heating system,but can also directlymeet the building heating temperature,and can reduce the influence of low-temperature outdoor environments in severe cold regions on the heating performance of the air source heat pump by using solar energy.Therefore,the two-stage phase change heat storage coupled to the solar energy-air source heat pump heating system effectively improves the utilization rate of solar energy.A numerical model of the system components and their integration was developed using TRNSYS software in this study,and various performance aspects of the system were simulated and analyzed.The simulation results demonstrated that the two-stage heat storage device can effectively store solar energy,enabling its hierarchical utilization.The low-temperature solar energy stored by the two-stage phase change heat storage device enhances the coefficient of performance of the air source heat pump by 11.1%in severe cold conditions.Using the Hooke-Jeeves optimization method,the annual cost and carbon emissions are taken as optimization objectives,with the optimized solar heat supply accounting for 52.5%.This study offers valuable insights into operational strategies and site selection for engineering applications,providing a solid theoretical foundation for the widespread implementation of this system in severe cold regions.展开更多
The grain boundary diffusion process(GBDP)has proven to be an effective method for enhancing the coercivity of sintered Nd-Fe-B magnets.However,the limited diffusion depth and thicker shell struc-ture have impeded the...The grain boundary diffusion process(GBDP)has proven to be an effective method for enhancing the coercivity of sintered Nd-Fe-B magnets.However,the limited diffusion depth and thicker shell struc-ture have impeded the further development of magnetic properties.Currently,the primary debates re-garding the mechanism of GBDP with Tb revolve around the dissolution-solidification mechanism and the atomic substitution mechanism.To clarify this mechanism,the microstructure evolution of sintered Nd-Fe-B magnets during the heating process of GBDP has been systematically studied by quenching at different tem peratures.In this study,it was found that the formation of TbFe_(2) phase is related to the dis-solution of _(2)Fe_(14)B grains during GBDP with Tb.The theory of mixing heat and phase separation further confirms that the Nd_(2)Fe_(14)B phase dissolves to form a mixed phase of Nd and TbFe_(2),which then solidifies into the(Nd,Tb)_(2)Fe_(14)B phase.Based on the discovery of the TbFe_(2) phase,the dissolution-solidification mechanism is considered the primary mechanism for GBDP.This is supported by the elemental content of the two typical core-shell structures observed.展开更多
A novel phase change heat sink was fabricated for packaging cooling of high power light emitting diode （LED）. 3D structures as enhanced boiling structure in the evaporation surface were composed of a spiral micro-gr...A novel phase change heat sink was fabricated for packaging cooling of high power light emitting diode （LED）. 3D structures as enhanced boiling structure in the evaporation surface were composed of a spiral micro-groove along circumferential direction and radial micro-grooves which were processed by ploughing-extrusion （P-E） and stamping, respectively. Meanwhile, the cycle power of refrigerant was supplied by wick of sintered copper powder on internal surface of phase change heat sink. Operational characteristics were tested under different heat loads and refrigerants. The experimental results show that phase change heat sink is provided with a good heat transfer capability and the temperature of phase change heat sink reaches 86.8 ℃ under input power of 10 W LED at ambient temperature of 20 ℃.展开更多
In view of the limitations of solid metal heat sink in the heat dissipation of high power light emitting diode （LED）, a kind of miniaturized phase change heat sink is developed for high power LED packaging. First, t...In view of the limitations of solid metal heat sink in the heat dissipation of high power light emitting diode （LED）, a kind of miniaturized phase change heat sink is developed for high power LED packaging. First, the fabrication process of miniaturized phase change heat sink is investigated, upon which all parts of the heat sink are fabricated including main-body and end-cover of the heat sink, the formation of three-dimensional boiling structures at the evaporation end, the sintering of the wick, and the encapsulation of high power LED phase change heat sink. Subsequently, with the assistance of the developed testing system, heat transfer performance of the heat sink is tested under the condition of natural convection, upon which the influence of thermal load and working medium on the heat transfer performance is investigated. Finally, the heat transfer performance of the developed miniaturized phase change heat sink is compared with that of metal solid heat sink. Results show that the developed miniaturized phase change heat sink presents much better heat transfer performance over traditional metal solid heat sink, and is suitable for the packaging of high power LED.展开更多
The effects of Laves phase formation and growth on creep rupture behaviors of P92 steel at 883 K were studied.The microstructural evolution was characterized using scanning electron microscopy and transmission electro...The effects of Laves phase formation and growth on creep rupture behaviors of P92 steel at 883 K were studied.The microstructural evolution was characterized using scanning electron microscopy and transmission electron microscopy.Kinetic modeling was carried out using the software DICTRA.The results indicated Fe_2（W,Mo）Laves phase has formed during creep with 200 MPa applied stress at 883 Kfor 243 h.The experimental results showed a good agreement with thermodynamic calculations.The plastic deformation of laths is the main reason of creep rupture under the applied stress beyond 160 MPa,whereas,creep voids initiated by coarser Laves phase play an effective role in creep rupture under the applied stress lower than 160 MPa.Laves phase particles with the mean size of 243 nm lead to the change of creep rupture feature.Microstructures at the vicinity of fracture surface,the gage portion and the threaded ends of creep rupture specimens were also observed,indicating that creep tensile stress enhances the coarsening of Laves phase.展开更多
To obtain the phase transformation latent heat corresponding to different cooling rates with low test workload and cost,the Newton thermal analysis method and the improved Newtonian thermal analysis method were discus...To obtain the phase transformation latent heat corresponding to different cooling rates with low test workload and cost,the Newton thermal analysis method and the improved Newtonian thermal analysis method were discussed based on the cooling curve obtained in the end-quench test.The validity of two methods was given by the latent heat calculation of 45^(#) steel.The results show that the relative error of latent heat is 5.20%through the improved Newtonian thermal analysis method,which is more accurate than the Newtonian thermal analysis method.Furthermore,the latent heat release of phase transformation of the self-designed CSU-A1 powder metallurgy nickel-based superalloy increases from 4.3 to 12.29 J/g when the cooling rate decreases from 50.15 to 33.40℃/min,because there is more sufficient time for the alloy microstructure to complete the phase transformation process when the cooling rate is smaller.展开更多
Phase diagram and thermodynamic parameters of the random field Ising model （RFIM） on spherical lattice are studied by using mean field theory. This lattice is placed in an external magnetic field （B）. The random f...Phase diagram and thermodynamic parameters of the random field Ising model （RFIM） on spherical lattice are studied by using mean field theory. This lattice is placed in an external magnetic field （B）. The random field （hi） is assumed to be Gaussian distributed with zero mean and a variance （hi2） = HRF2. The free energy （F）, the magnetization （M） and the order parameter （q） are calculated. The ferromagnetic （FM） spin-glass （SG） phase transition is clearly observed. The critical temperature （Tc） is computed under a critical intensity of random field HRF = V/2/πJ. The phase transition from FM to paramagnetic （PM） occurs at TC = J/k in the absence of magnetic field. The critical temperature decreases as HRF increases in the phase boundary of FM-to-SG. The magnetic susceptibility （X） shows a sharp cusp at TC and the specific heat （C） has a singularity in small random field. The internal energy （U） has a similar behaviour to that obtained from the Monte Carlo simulation.展开更多
Analytically solving a three-dimensional （3-D） bioheat transfer problem with phase change during a freezing process is extremely difficult but theoretically important. The moving heat source model and the Green func...Analytically solving a three-dimensional （3-D） bioheat transfer problem with phase change during a freezing process is extremely difficult but theoretically important. The moving heat source model and the Green function method are introduced to deal with the cryopreservation process of in vitro biomaterials. Exact solutions for the 3-D temperature transients of tissues under various boundary conditions, such as totally convective cooling, totally fixed temperature cooling and a hybrid between them on tissue surfaces, are obtained. Furthermore, the cryosurgical process in living tissues subject to freezing by a single or multiple cryoprobes is also analytically solved. A closed-form analytical solution to the bioheat phase change process is derived by considering contributions from blood perfusion heat transfer, metabolic heat generation, and heat sink of a cryoprobe. The present method is expected to have significant value for analytically solving complex bioheat transfer problems with phase change.展开更多
The structural evolution of Cu_（45）Zr_（45）Ag_（10） metallic glass was investigated by in situ transmission electron microscopy heating experiments. The relationship between phase separation and crystallization wa...The structural evolution of Cu_（45）Zr_（45）Ag_（10） metallic glass was investigated by in situ transmission electron microscopy heating experiments. The relationship between phase separation and crystallization was elucidated. Nucleation and growth-controlled nanoscale phase separation at early stage were seen to impede nanocrystallization, while a coarser phase separation via aggregation of Ag-rich nanospheres was found to promote the precipitation of Cu-rich nanocrystals.Coupling of composition and dynamics heterogeneities was supposed to play a key role during phase separation preceding crystallization.展开更多
Using the air-sea data set of January, 1983 (the mature phase of the 1982/83 El Nino event), the net radiation on the sea surface, the fluxes of the latent and the sensible heat from ocean to the atmosphere and the ne...Using the air-sea data set of January, 1983 (the mature phase of the 1982/83 El Nino event), the net radiation on the sea surface, the fluxes of the latent and the sensible heat from ocean to the atmosphere and the net heat gain of the sea surface are calculated over the Indian and the Pacific Oceans for the domain of 35°N-35°S and 45°E-75°W. The results indicate that the upward transfer of the latent and the sensible heat fluxes over the winter hemisphere is larger than that over the summer hemisphere. The sensible heat over the tropical mid Pacific in the Southern Hemisphere is transported from the atmosphere to the ocean, though its magnitude is rather small. The latent heat flux gained by the air over the eastern Pacific is less than the mean value of the normal year. The net radiation, on which the cloud amount has considerable impact, is essentially zonally distributed. Moreover, the sea surface temperature (SST) has a very good correlation with the net radiation, the region of warm SST coinciding with that of the low net radiation. The net radiation obtained by the mid Pacific Ocean is reduced by the SST anomaly during the El Nino event, whereas the atmosphere over there get more latent heat flux, and this results in the diminution of the net heat gain of the ocean. The overview of the heat budget is that the ocean over the winter hemisphere is the energy source of the atmosphere, and that over the summer hemisphere its energy sink.展开更多
A theoretical model of phase change heat sink was established in terms of thermal resistance network. The influence of different parameters on the thermal resistance was analyzed and the crucial impact factors were de...A theoretical model of phase change heat sink was established in terms of thermal resistance network. The influence of different parameters on the thermal resistance was analyzed and the crucial impact factors were determined. Subsequently, the forming methods including ploughing-extrusion and stamping method of boiling enhancement structure at evaporation surface were investigated, upon which three-dimensional microgroove structure was fabricated to improve the efficiency of evaporation. Moreover, the crucial parameters related to the fabrication of miniaturized phase change heat sink were optimized. The heat transfer performance of the heat sink was tested. Results show that the developed phase change heat sink has excellent heat transfer performance and is suitable for high power LED applications.展开更多
A method to simulate processes of forging and subsequent heat treatment of an axial symmetric rod is formulated in eulerian description and the feasibility is investigated. This method uses finite volume mushes for t...A method to simulate processes of forging and subsequent heat treatment of an axial symmetric rod is formulated in eulerian description and the feasibility is investigated. This method uses finite volume mushes for troching material deformation and an automatically refined facet surface to accurately trace the free surface of the deforming material.In the method,the deforming work piece flows through fixed finite volume meshes using eulerian formulation to describe the conservation laws,Fixed finite volume meshing is particularly suitable for large three-dimensional deformation such as forging because remeshing techniques are not required, which are commonly considered to be the main bottelencek in the ssimulations of large defromation by using the finite element method,By means of this finite volume method, an approach has been developed in the framework of 'metallo-thermo-mechanics' to simulate metallic structure, temperature and stress/strain coupled in the heat treatment process.In a first step of simulation, the heat treatment solver is limited in small deformation hypothesis,and un- coupled with forging. The material is considered as elastic-plastic and takes into account of strain, strain rate and temperature effects on the yield stress.Heat generation due to deformation,heat con- duction and thermal stress are considered.Temperature - dependent phase transformation,stress-in- duced phase transformation,latent heat,transformation stress and strain are included.These ap- proaches are implemented into the commerical commercial computer program MSC/SuperForge and a verification example with experimental date is given as comparison.展开更多
With the advent of the 5G era,the design of electronic equipment is developing towards thinness,intelligence and multi-function,which requires higher cooling performance of the equipment.Micro-channel heat sink is pro...With the advent of the 5G era,the design of electronic equipment is developing towards thinness,intelligence and multi-function,which requires higher cooling performance of the equipment.Micro-channel heat sink is promising for the heat dissipation of super-thin electronic equipment.In this study,thermal resistance theoretical model of the micro-channel heat sink was first established.Then,fabrication process of the micro-channel heat sink was introduced.Subsequently,heat transfer performance of the fabricated micro-channel heat sink was tested through the developed testing platform.Results show that the developed micro-channel heat sink has more superior heat dissipation performance over conventional metal solid heat sink and it is well suited for high power LEDs application.Moreover,the micro-channel structures in the heat sink were optimized by orthogonal test.Based on the orthogonal optimization,heat dissipation performance of the micro-channel radiator was further improved.展开更多
Using the Kane-Mele Hamiltonian, Dirac theory and self-consistent Born approximation, we investigate the effect of dilute charged impurity on the electronic heat capacity and magnetic susceptibility of two-dimensional...Using the Kane-Mele Hamiltonian, Dirac theory and self-consistent Born approximation, we investigate the effect of dilute charged impurity on the electronic heat capacity and magnetic susceptibility of two-dimensional ferromagnetic honeycomb structure of group-Ⅳ elements including silicene, germanene and stanene within the Green's function approach. We also find these quantities in the presence of applied external electric field. Our results show that the silicene(stanene) has the maximum(minimum) heat capacity and magnetic susceptibility at uniform electric fields. From the behavior of theses quantities, the band gap has been changed with impurity concentration, impurity scattering strength and electric field. The analysis on the impurity-dependent magnetic susceptibility curves shows a phase transition from ferromagnetic to paramagnetic and antiferromagnetic phases. Interestingly, electronic heat capacity increases(decreases) with impurity concentration in silicene(germanene and stanene) structure.展开更多
To meet the application requirements for a Ka-band space-based TT&C terminal for a launch vehicle,this paper proposes the implementation scheme of a space-based TT&C terminal,analyzes and solves the miniaturiz...To meet the application requirements for a Ka-band space-based TT&C terminal for a launch vehicle,this paper proposes the implementation scheme of a space-based TT&C terminal,analyzes and solves the miniaturized design of equipment and the key technology for high-efficiency heat dissipation.The phased array antenna test shows that without external heat dissipation measures,the phased array antenna can work for a long time to meet the working requirements of launch vehicle,which has been verified in the LM-8 mission,and has wide engineering application prospects.展开更多
Phase change materials(PCM)have evolved over time and gradually adapted to the emerging needs of society.Their excellent properties,such as high latent heat storage capacity and fast response time,have aroused tremend...Phase change materials(PCM)have evolved over time and gradually adapted to the emerging needs of society.Their excellent properties,such as high latent heat storage capacity and fast response time,have aroused tremendous interest in applications such as thermal management systems,building energy efficiency,communications,and power.However,drawbacks such as low thermal conductivity,susceptibility to leakage,and small latent heat of phase transition limit the practical application of PCM.In this work,an innovative wood derived carbon-carbon nanotubes-paraffin wax(WDC-CNTs-PW)phase change energy storage composite is prepared by the high-temperature carbonization process,injection chemical vapor deposition,and vacuum impregnation method.The enhanced thermal conductivity of WDC-CNTs-PW is mainly due to the three-dimensional porous structure of WDC and the homogeneous introduction of the thermally enhanced filler CNTs.The axial and radial thermal conductivities of WDC-CNTs-PW are 0.35 and 0.29 W·m^(-1)·K^(-1),respectively.The enthalpies of melting and crystallization of WDC-CNTs-PW are 142.02 and 136.14 J·g^(-1),respectively,with impregnation efficiency of 70.95% and loading ratio of 73.01%.With excellent thermal conductivity,latent heat of phase transition,and encapsulation property,WDC-CNTs-PW opens up a surprising strategy for PCM applications in areas such as high technology microelectronics and energy-saving in houses.展开更多
EQrot nonconforming finite element approximation to a class of nonlinear dual phase lagging heat conduction equations is discussed for semi-discrete and fully-discrete schemes. By use of a special property, that is, t...EQrot nonconforming finite element approximation to a class of nonlinear dual phase lagging heat conduction equations is discussed for semi-discrete and fully-discrete schemes. By use of a special property, that is, the consistency error of this element is of order O（h2） one order higher than its interpolation error O（h）, the superclose results of order O（h2） in broken Hi-norm are obtained. At the same time, the global superconvergence in broken Hi-norm is deduced by interpolation postprocessing technique. Moreover, the extrapolation result with order O（h4） is derived by constructing a new interpolation postprocessing operator and extrapolation scheme based on the known asymptotic expansion formulas of EQrot element. Finally, optimal error estimate is gained for a proposed fully-discrete scheme by different approaches from the previous literature.展开更多
In view of the high temperature problem faced by mining activities,the coordinated mining of ore deposit and geothermal energy is a solution in line with the concept of green mining.The layered backfill body with finn...In view of the high temperature problem faced by mining activities,the coordinated mining of ore deposit and geothermal energy is a solution in line with the concept of green mining.The layered backfill body with finned double-pipe heat exchanger continuously exchanges heat with the surrounding thermal environment,which plays an effective role in gathering geothermal energy.In this paper,the heat storage process of each layered backfill body under different boundary conditions is simulated by Fluent.The results show the heat storage characteristic of layered backfill body can be significantly improved by adding fins to the double-pipe heat exchanger.On the whole,the heat storage effect of bottom layer backfill body(BLBB)is the best.The total heat storage capacity of top layer backfill body(TLBB),middle layer backfill body(MLBB)and BLBB with the finned double-pipe heat exchanger is 666.3 kJ,662.2 kJ,1003.0 kJ;1639.0 kJ,1760.8 kJ,1911.2 kJ and 1731.1 kJ,1953.3 kJ,1962.8 kJ respectively at 1 h,8 h and 24 h.This study explores the law of heat storage of layered backfill body under different boundary conditions and also expands the idea for layered backfill body to efficiently accumulate geothermal energy.展开更多
This work studied the effect of differential temperatures on the latent heat in the nucleation of CdSe quantum dots（QDs）.The result showed that,by the formula of phase change,with increasing the reaction temperature...This work studied the effect of differential temperatures on the latent heat in the nucleation of CdSe quantum dots（QDs）.The result showed that,by the formula of phase change,with increasing the reaction temperature,the latent heat in the nucleation of QDs reduced.CdSe QDs with the size-dispersion from 2.7 to 3.6 nm were synthesized via oleic acid-paraffin liquid system by controlling the reaction temperature from 180 to 220℃.Synthesized QDs were characterized by UV-vis absorption spectra and X-ray diffraction（XRD）.The result of UV-vis absorption spectra showed that with increasing of reaction temperature,the first absorption peak was red-shifted and the size of QD increased.The result of XRD showed that the synthesized QDs were zinc-blende structure.展开更多
基金This work was supported by the project of the Research on Energy Consumption of Office Space in Colleges and Universities under the“Dual Carbon Target”(No.CJ202301006).
文摘The development of efficient and clean heating technologies is crucial for reducing carbon emissions in regions with severe cold regions.This research designs a novel two-stage phase change heat storage coupled solar-air source heat pump heating system structure that is specifically designed for such regions.The two-stage heat storage device in this heating system expands the storage temperature range of solar heat.The utilization of the two-stage heat storage device not onlymakes up for the instability of the solar heating system,but can also directlymeet the building heating temperature,and can reduce the influence of low-temperature outdoor environments in severe cold regions on the heating performance of the air source heat pump by using solar energy.Therefore,the two-stage phase change heat storage coupled to the solar energy-air source heat pump heating system effectively improves the utilization rate of solar energy.A numerical model of the system components and their integration was developed using TRNSYS software in this study,and various performance aspects of the system were simulated and analyzed.The simulation results demonstrated that the two-stage heat storage device can effectively store solar energy,enabling its hierarchical utilization.The low-temperature solar energy stored by the two-stage phase change heat storage device enhances the coefficient of performance of the air source heat pump by 11.1%in severe cold conditions.Using the Hooke-Jeeves optimization method,the annual cost and carbon emissions are taken as optimization objectives,with the optimized solar heat supply accounting for 52.5%.This study offers valuable insights into operational strategies and site selection for engineering applications,providing a solid theoretical foundation for the widespread implementation of this system in severe cold regions.
基金supported by the National Key Research and Development Program of China(2022YFB3505503)the National Natural Science Foundation of China(52201230)+2 种基金the Key R&D Program of Shandong Province(2022CXGC020307)the China Postdoctoral Science Foundation(2022M71204)the Beijing NOVA Program(Z211100002121092).
文摘The grain boundary diffusion process(GBDP)has proven to be an effective method for enhancing the coercivity of sintered Nd-Fe-B magnets.However,the limited diffusion depth and thicker shell struc-ture have impeded the further development of magnetic properties.Currently,the primary debates re-garding the mechanism of GBDP with Tb revolve around the dissolution-solidification mechanism and the atomic substitution mechanism.To clarify this mechanism,the microstructure evolution of sintered Nd-Fe-B magnets during the heating process of GBDP has been systematically studied by quenching at different tem peratures.In this study,it was found that the formation of TbFe_(2) phase is related to the dis-solution of _(2)Fe_(14)B grains during GBDP with Tb.The theory of mixing heat and phase separation further confirms that the Nd_(2)Fe_(14)B phase dissolves to form a mixed phase of Nd and TbFe_(2),which then solidifies into the(Nd,Tb)_(2)Fe_(14)B phase.Based on the discovery of the TbFe_(2) phase,the dissolution-solidification mechanism is considered the primary mechanism for GBDP.This is supported by the elemental content of the two typical core-shell structures observed.
基金Projects(50436010,50930005)supported by the National Natural Science Foundation of ChinaProject(U0834002)supported by the Joint Fund of NSFC-Guangdong of China
文摘A novel phase change heat sink was fabricated for packaging cooling of high power light emitting diode （LED）. 3D structures as enhanced boiling structure in the evaporation surface were composed of a spiral micro-groove along circumferential direction and radial micro-grooves which were processed by ploughing-extrusion （P-E） and stamping, respectively. Meanwhile, the cycle power of refrigerant was supplied by wick of sintered copper powder on internal surface of phase change heat sink. Operational characteristics were tested under different heat loads and refrigerants. The experimental results show that phase change heat sink is provided with a good heat transfer capability and the temperature of phase change heat sink reaches 86.8 ℃ under input power of 10 W LED at ambient temperature of 20 ℃.
基金Projects(51575115,51775122)supported by the National Natural Science Foundation of China
文摘In view of the limitations of solid metal heat sink in the heat dissipation of high power light emitting diode （LED）, a kind of miniaturized phase change heat sink is developed for high power LED packaging. First, the fabrication process of miniaturized phase change heat sink is investigated, upon which all parts of the heat sink are fabricated including main-body and end-cover of the heat sink, the formation of three-dimensional boiling structures at the evaporation end, the sintering of the wick, and the encapsulation of high power LED phase change heat sink. Subsequently, with the assistance of the developed testing system, heat transfer performance of the heat sink is tested under the condition of natural convection, upon which the influence of thermal load and working medium on the heat transfer performance is investigated. Finally, the heat transfer performance of the developed miniaturized phase change heat sink is compared with that of metal solid heat sink. Results show that the developed miniaturized phase change heat sink presents much better heat transfer performance over traditional metal solid heat sink, and is suitable for the packaging of high power LED.
基金Item Sponsored by National Natural Science Foundation of China(51201061,51475315)China Postdoctoral Science Foundation(2015M571804)Natural Science Foundation of Jiangsu Province of China(BK20150329)
文摘The effects of Laves phase formation and growth on creep rupture behaviors of P92 steel at 883 K were studied.The microstructural evolution was characterized using scanning electron microscopy and transmission electron microscopy.Kinetic modeling was carried out using the software DICTRA.The results indicated Fe_2（W,Mo）Laves phase has formed during creep with 200 MPa applied stress at 883 Kfor 243 h.The experimental results showed a good agreement with thermodynamic calculations.The plastic deformation of laths is the main reason of creep rupture under the applied stress beyond 160 MPa,whereas,creep voids initiated by coarser Laves phase play an effective role in creep rupture under the applied stress lower than 160 MPa.Laves phase particles with the mean size of 243 nm lead to the change of creep rupture feature.Microstructures at the vicinity of fracture surface,the gage portion and the threaded ends of creep rupture specimens were also observed,indicating that creep tensile stress enhances the coarsening of Laves phase.
基金the financial supports from the National Key Research and Development Program of China(No.2016YFB0700300)the Postgraduate Independent Exploration and Innovation Project of Central South University,China(No.2019zzts262)。
文摘To obtain the phase transformation latent heat corresponding to different cooling rates with low test workload and cost,the Newton thermal analysis method and the improved Newtonian thermal analysis method were discussed based on the cooling curve obtained in the end-quench test.The validity of two methods was given by the latent heat calculation of 45^(#) steel.The results show that the relative error of latent heat is 5.20%through the improved Newtonian thermal analysis method,which is more accurate than the Newtonian thermal analysis method.Furthermore,the latent heat release of phase transformation of the self-designed CSU-A1 powder metallurgy nickel-based superalloy increases from 4.3 to 12.29 J/g when the cooling rate decreases from 50.15 to 33.40℃/min,because there is more sufficient time for the alloy microstructure to complete the phase transformation process when the cooling rate is smaller.
文摘Phase diagram and thermodynamic parameters of the random field Ising model （RFIM） on spherical lattice are studied by using mean field theory. This lattice is placed in an external magnetic field （B）. The random field （hi） is assumed to be Gaussian distributed with zero mean and a variance （hi2） = HRF2. The free energy （F）, the magnetization （M） and the order parameter （q） are calculated. The ferromagnetic （FM） spin-glass （SG） phase transition is clearly observed. The critical temperature （Tc） is computed under a critical intensity of random field HRF = V/2/πJ. The phase transition from FM to paramagnetic （PM） occurs at TC = J/k in the absence of magnetic field. The critical temperature decreases as HRF increases in the phase boundary of FM-to-SG. The magnetic susceptibility （X） shows a sharp cusp at TC and the specific heat （C） has a singularity in small random field. The internal energy （U） has a similar behaviour to that obtained from the Monte Carlo simulation.
基金Project supported by the National Natural Science Foundation of China (No. 50776097)
文摘Analytically solving a three-dimensional （3-D） bioheat transfer problem with phase change during a freezing process is extremely difficult but theoretically important. The moving heat source model and the Green function method are introduced to deal with the cryopreservation process of in vitro biomaterials. Exact solutions for the 3-D temperature transients of tissues under various boundary conditions, such as totally convective cooling, totally fixed temperature cooling and a hybrid between them on tissue surfaces, are obtained. Furthermore, the cryosurgical process in living tissues subject to freezing by a single or multiple cryoprobes is also analytically solved. A closed-form analytical solution to the bioheat phase change process is derived by considering contributions from blood perfusion heat transfer, metabolic heat generation, and heat sink of a cryoprobe. The present method is expected to have significant value for analytically solving complex bioheat transfer problems with phase change.
基金supported by the National Natural Science Foundation of China (Grant No. 51101004)the financial support of China Scholarship Council. Z.Q. Liu is gratefulsupport by the IMR SYNL-T.S. Kê Research Fellowship
文摘The structural evolution of Cu_（45）Zr_（45）Ag_（10） metallic glass was investigated by in situ transmission electron microscopy heating experiments. The relationship between phase separation and crystallization was elucidated. Nucleation and growth-controlled nanoscale phase separation at early stage were seen to impede nanocrystallization, while a coarser phase separation via aggregation of Ag-rich nanospheres was found to promote the precipitation of Cu-rich nanocrystals.Coupling of composition and dynamics heterogeneities was supposed to play a key role during phase separation preceding crystallization.
文摘Using the air-sea data set of January, 1983 (the mature phase of the 1982/83 El Nino event), the net radiation on the sea surface, the fluxes of the latent and the sensible heat from ocean to the atmosphere and the net heat gain of the sea surface are calculated over the Indian and the Pacific Oceans for the domain of 35°N-35°S and 45°E-75°W. The results indicate that the upward transfer of the latent and the sensible heat fluxes over the winter hemisphere is larger than that over the summer hemisphere. The sensible heat over the tropical mid Pacific in the Southern Hemisphere is transported from the atmosphere to the ocean, though its magnitude is rather small. The latent heat flux gained by the air over the eastern Pacific is less than the mean value of the normal year. The net radiation, on which the cloud amount has considerable impact, is essentially zonally distributed. Moreover, the sea surface temperature (SST) has a very good correlation with the net radiation, the region of warm SST coinciding with that of the low net radiation. The net radiation obtained by the mid Pacific Ocean is reduced by the SST anomaly during the El Nino event, whereas the atmosphere over there get more latent heat flux, and this results in the diminution of the net heat gain of the ocean. The overview of the heat budget is that the ocean over the winter hemisphere is the energy source of the atmosphere, and that over the summer hemisphere its energy sink.
基金Projects(51575115,51775122) supported by the National Natural Science Foundation of China
文摘A theoretical model of phase change heat sink was established in terms of thermal resistance network. The influence of different parameters on the thermal resistance was analyzed and the crucial impact factors were determined. Subsequently, the forming methods including ploughing-extrusion and stamping method of boiling enhancement structure at evaporation surface were investigated, upon which three-dimensional microgroove structure was fabricated to improve the efficiency of evaporation. Moreover, the crucial parameters related to the fabrication of miniaturized phase change heat sink were optimized. The heat transfer performance of the heat sink was tested. Results show that the developed phase change heat sink has excellent heat transfer performance and is suitable for high power LED applications.
文摘A method to simulate processes of forging and subsequent heat treatment of an axial symmetric rod is formulated in eulerian description and the feasibility is investigated. This method uses finite volume mushes for troching material deformation and an automatically refined facet surface to accurately trace the free surface of the deforming material.In the method,the deforming work piece flows through fixed finite volume meshes using eulerian formulation to describe the conservation laws,Fixed finite volume meshing is particularly suitable for large three-dimensional deformation such as forging because remeshing techniques are not required, which are commonly considered to be the main bottelencek in the ssimulations of large defromation by using the finite element method,By means of this finite volume method, an approach has been developed in the framework of 'metallo-thermo-mechanics' to simulate metallic structure, temperature and stress/strain coupled in the heat treatment process.In a first step of simulation, the heat treatment solver is limited in small deformation hypothesis,and un- coupled with forging. The material is considered as elastic-plastic and takes into account of strain, strain rate and temperature effects on the yield stress.Heat generation due to deformation,heat con- duction and thermal stress are considered.Temperature - dependent phase transformation,stress-in- duced phase transformation,latent heat,transformation stress and strain are included.These ap- proaches are implemented into the commerical commercial computer program MSC/SuperForge and a verification example with experimental date is given as comparison.
基金Supported by the National Natural Science Foundation of China(Grant Nos.51975135 and 52005422)Guangzhou Science and Technology Project(Grant No.201707010429)Special Innovation Projects of Universities in Guangdong Province(Grant No.2018GKTSCX085).
文摘With the advent of the 5G era,the design of electronic equipment is developing towards thinness,intelligence and multi-function,which requires higher cooling performance of the equipment.Micro-channel heat sink is promising for the heat dissipation of super-thin electronic equipment.In this study,thermal resistance theoretical model of the micro-channel heat sink was first established.Then,fabrication process of the micro-channel heat sink was introduced.Subsequently,heat transfer performance of the fabricated micro-channel heat sink was tested through the developed testing platform.Results show that the developed micro-channel heat sink has more superior heat dissipation performance over conventional metal solid heat sink and it is well suited for high power LEDs application.Moreover,the micro-channel structures in the heat sink were optimized by orthogonal test.Based on the orthogonal optimization,heat dissipation performance of the micro-channel radiator was further improved.
文摘Using the Kane-Mele Hamiltonian, Dirac theory and self-consistent Born approximation, we investigate the effect of dilute charged impurity on the electronic heat capacity and magnetic susceptibility of two-dimensional ferromagnetic honeycomb structure of group-Ⅳ elements including silicene, germanene and stanene within the Green's function approach. We also find these quantities in the presence of applied external electric field. Our results show that the silicene(stanene) has the maximum(minimum) heat capacity and magnetic susceptibility at uniform electric fields. From the behavior of theses quantities, the band gap has been changed with impurity concentration, impurity scattering strength and electric field. The analysis on the impurity-dependent magnetic susceptibility curves shows a phase transition from ferromagnetic to paramagnetic and antiferromagnetic phases. Interestingly, electronic heat capacity increases(decreases) with impurity concentration in silicene(germanene and stanene) structure.
文摘To meet the application requirements for a Ka-band space-based TT&C terminal for a launch vehicle,this paper proposes the implementation scheme of a space-based TT&C terminal,analyzes and solves the miniaturized design of equipment and the key technology for high-efficiency heat dissipation.The phased array antenna test shows that without external heat dissipation measures,the phased array antenna can work for a long time to meet the working requirements of launch vehicle,which has been verified in the LM-8 mission,and has wide engineering application prospects.
基金supported by the Key R&D Program of Shaanxi Province(No.2021ZDLGY14-04)the National Training Program of Innovation and Entrepreneurship for Undergraduates(No.XN2022023)the Joint Funds of the National Natural Science Foundation of China(No.U21B2067).
文摘Phase change materials(PCM)have evolved over time and gradually adapted to the emerging needs of society.Their excellent properties,such as high latent heat storage capacity and fast response time,have aroused tremendous interest in applications such as thermal management systems,building energy efficiency,communications,and power.However,drawbacks such as low thermal conductivity,susceptibility to leakage,and small latent heat of phase transition limit the practical application of PCM.In this work,an innovative wood derived carbon-carbon nanotubes-paraffin wax(WDC-CNTs-PW)phase change energy storage composite is prepared by the high-temperature carbonization process,injection chemical vapor deposition,and vacuum impregnation method.The enhanced thermal conductivity of WDC-CNTs-PW is mainly due to the three-dimensional porous structure of WDC and the homogeneous introduction of the thermally enhanced filler CNTs.The axial and radial thermal conductivities of WDC-CNTs-PW are 0.35 and 0.29 W·m^(-1)·K^(-1),respectively.The enthalpies of melting and crystallization of WDC-CNTs-PW are 142.02 and 136.14 J·g^(-1),respectively,with impregnation efficiency of 70.95% and loading ratio of 73.01%.With excellent thermal conductivity,latent heat of phase transition,and encapsulation property,WDC-CNTs-PW opens up a surprising strategy for PCM applications in areas such as high technology microelectronics and energy-saving in houses.
基金Supported by the National Natural Science Foundation of China (Nos. 10971203 11101381)+3 种基金Tianyuan Mathe-matics Foundation of National Natural Science Foundation of China (No. 11026154)Natural Science Foundation of Henan Province (No. 112300410026)Natural Science Foundation of the Education Department of Henan Province (Nos. 2011A110020 12A110021)
文摘EQrot nonconforming finite element approximation to a class of nonlinear dual phase lagging heat conduction equations is discussed for semi-discrete and fully-discrete schemes. By use of a special property, that is, the consistency error of this element is of order O（h2） one order higher than its interpolation error O（h）, the superclose results of order O（h2） in broken Hi-norm are obtained. At the same time, the global superconvergence in broken Hi-norm is deduced by interpolation postprocessing technique. Moreover, the extrapolation result with order O（h4） is derived by constructing a new interpolation postprocessing operator and extrapolation scheme based on the known asymptotic expansion formulas of EQrot element. Finally, optimal error estimate is gained for a proposed fully-discrete scheme by different approaches from the previous literature.
基金supported by the National Natural Science Foundation of China(Nos.51974225,51874229,51674188,51504182,51904224,51904225,51704229)Shaanxi Innovative Talents Cultivate Program-New-star Plan of Science and Technology(No.2018KJXX-083)+3 种基金Natural Science Basic Research Plan of Shaanxi Province of China(Nos.2018JM5161,2018JQ5183,2015JQ5187,2019JM-074)Scientific Research Program funded by the Shaanxi Provincial Education Department(Nos.15JK1466,19JK0543)China Postdoctoral Science Foundation(No.2015M582685)Outstanding Youth Science Fund of Xi’an University of Science and Technology(No.2018YQ2-01)。
文摘In view of the high temperature problem faced by mining activities,the coordinated mining of ore deposit and geothermal energy is a solution in line with the concept of green mining.The layered backfill body with finned double-pipe heat exchanger continuously exchanges heat with the surrounding thermal environment,which plays an effective role in gathering geothermal energy.In this paper,the heat storage process of each layered backfill body under different boundary conditions is simulated by Fluent.The results show the heat storage characteristic of layered backfill body can be significantly improved by adding fins to the double-pipe heat exchanger.On the whole,the heat storage effect of bottom layer backfill body(BLBB)is the best.The total heat storage capacity of top layer backfill body(TLBB),middle layer backfill body(MLBB)and BLBB with the finned double-pipe heat exchanger is 666.3 kJ,662.2 kJ,1003.0 kJ;1639.0 kJ,1760.8 kJ,1911.2 kJ and 1731.1 kJ,1953.3 kJ,1962.8 kJ respectively at 1 h,8 h and 24 h.This study explores the law of heat storage of layered backfill body under different boundary conditions and also expands the idea for layered backfill body to efficiently accumulate geothermal energy.
基金Project supported by the National Natural Science Fund of China(No.11204046)the International Science and Technology Cooperation Project of China(No.2014DFA00670)the Guizhou Province International Science and Technology Cooperation Project of China(No.QKHG[2011]7001)
文摘This work studied the effect of differential temperatures on the latent heat in the nucleation of CdSe quantum dots（QDs）.The result showed that,by the formula of phase change,with increasing the reaction temperature,the latent heat in the nucleation of QDs reduced.CdSe QDs with the size-dispersion from 2.7 to 3.6 nm were synthesized via oleic acid-paraffin liquid system by controlling the reaction temperature from 180 to 220℃.Synthesized QDs were characterized by UV-vis absorption spectra and X-ray diffraction（XRD）.The result of UV-vis absorption spectra showed that with increasing of reaction temperature,the first absorption peak was red-shifted and the size of QD increased.The result of XRD showed that the synthesized QDs were zinc-blende structure.
