An abnormal fluorescence intensity ratio （FIR） between two green emissions of Er3＋, at room temperature, which is larger than a normal value, emerged in many reported articles. However, up to now detailed work has ...An abnormal fluorescence intensity ratio （FIR） between two green emissions of Er3＋, at room temperature, which is larger than a normal value, emerged in many reported articles. However, up to now detailed work has seldom been done to clarify this abnormal phenomenon. In this paper, green upconversion luminescence of the β-NaLuF4：20%yb3＋,2%Er3＋ powder sample was investigated under 980 um excitation at different circumstances, different pump power densities and different temperatures as well as different air pressures. The corresponding local temperature calculated using FIR technique increased gradually with the enhancement of the pump power density. It was demonstrated that high pump power density of 980 nm laser led to the increase of local temperature of the luminescent material, which further gave the abnormal FIR.展开更多
Nanofluids have attracted many scientists due to their remarkable thermophysical properties.Small percentage of nanoparticles when added to conventional fluid significantly enhances the heat transfer features.Sustaina...Nanofluids have attracted many scientists due to their remarkable thermophysical properties.Small percentage of nanoparticles when added to conventional fluid significantly enhances the heat transfer features.Sustainability and efficiency of nanomaterials have key role in the advancement of nanotechnology.This article analyzes the Hall,Ohmic heating and velocity slip effects on the peristalsis of nanofluid.Convective boundary conditions and heat generation/absorption are considered to facilitate the heat transfer characteristics.Governing equations for the peristaltic flow through a curved channel are derived in curvilinear coordinates.The equations are numerically solved under the assumption of long wavelength and small Reynold number.It has been observed that nanofluid enhances the heat transfer rate and reduces the fluid temperature.Hartman number and Hall parameter show reverse behavior in fluid motion and heat transfer characteristics.In the presence of velocity slip,the pressure gradient rapidly decreases and dominant effect is seen in narrow portion of channel.展开更多
Fe3O4 magnetic nanoparticles with diameters varying from 10 to 426 nm were synthesized and characterized.Heating effects of Fe3O4 magnetic nanoparticles under radiofrequency capacitive field(RCF) with frequency of 27....Fe3O4 magnetic nanoparticles with diameters varying from 10 to 426 nm were synthesized and characterized.Heating effects of Fe3O4 magnetic nanoparticles under radiofrequency capacitive field(RCF) with frequency of 27.12 MHz and power of 60-150 W were investigated.When the power of RCF is lower than 90 W,temperatures of Fe3O4 magnetic nanoparticles(75-150 mg/mL) can be raised and maximal temperatures are all lower than 50 ℃.When the power of RCF is 90-150 W,temperatures of Fe3O4 magnetic nanoparticles can be quickly raised and are all obviously higher than those of normal saline and distilled water under the same conditions.Temperature of Fe3O4 magnetic nanoparticles can even reach 70.2 ℃ under 150 W RCF.Heating effects of Fe3O4 magnetic nanoparticles are related to RCF power,particle size and particle concentration.展开更多
This paper presents a numerical analysis of Joule heating effect of electroosmo- sis in a finite-length microchannel made of the glass and polydimethylsiloxane （PDMS） polymer. The Poisson-Boltzmann equation of elect...This paper presents a numerical analysis of Joule heating effect of electroosmo- sis in a finite-length microchannel made of the glass and polydimethylsiloxane （PDMS） polymer. The Poisson-Boltzmann equation of electric double layer, the Navier-Stokes equation of liquid flow, and the liquid-solid coupled heat transfer equation are solved to investigate temperature behaviors of electroosmosis in a two-dimensional microchannel. The feedback effect of temperature variation on liquid properties （dielectric constant, vis- cosity, and thermal and electric conductivities） is taken into account. Numerical results indicate that there exists a heat developing length near the channel inlet where the flow velocity, temperature, pressure, and electric field rapidly vary and then approach to a steady state after the heat developing length, which may occupy a considerable portion of the microchannel in cases of thick chip and high electric field. The liquid temperature of steady state increases with the increase of the applied electric field, channel width, and chip thickness. The temperature on a PDMS wall is higher than that on a glass wall due to the difference of heat conductivities of materials. Temperature variations are found in the both longitudinal and transverse directions of the microchannel. The increase of the temperature on the wall decreases the charge density of the electric double layer. The longitudinal temperature variation induces a pressure gradient and changes the behavior of the electric field in the microchannel. The inflow liquid temperature does not change the liquid temperature of steady state and the heat developing length.展开更多
A possible heating effect on the process of high deposition rate microcrystalline silicon has been studied. It includes the discharge time-accumulating heating effect, discharge power, inter-electrode distance, and to...A possible heating effect on the process of high deposition rate microcrystalline silicon has been studied. It includes the discharge time-accumulating heating effect, discharge power, inter-electrode distance, and total gas flow rate induced heating effect. It is found that the heating effects mentioned above are in some ways quite similar to and in other ways very different from each other. However, all of them will directly or indirectly cause the increase of the substrate surface temperature during the process of depositing microcrystalline silicon thin films, which will affect the properties of the materials with increasing time. This phenomenon is very serious for the high deposition rate of microcrystalline silicon thin films because of the high input power and the relatively small inter-electrode distance needed. Through analysis of the heating effects occurring in the process of depositing microcrystalline silicon, it is proposed that the discharge power and the heating temperature should be as low as possible, and the total gas flow rate and the inter-electrode distance should be suitable so that device-grade high quality deposition rate microcrystalline silicon thin films can be fabricated.展开更多
Metal nanoparticle@porous material composites have attracted increasing attention due to their excellent synergistic catalytic performance.However,it is a challenge to introduce metal nanoparticles into cavities of po...Metal nanoparticle@porous material composites have attracted increasing attention due to their excellent synergistic catalytic performance.However,it is a challenge to introduce metal nanoparticles into cavities of porous materials without agglomeration on the exterior.Despite the progress achieved,a universal approach that can integrate different kinds of metal nanoparticles and porous materials is still highly desirable.Here we report a facile and general approach to fabricating metal nanoparticle@porous materials by microwave-triggered selective heating.The microwave can pass through the non-polar solvent and act on the polar solvent in the porous materials,causing the polar solvent to be heated,vaporized,and away from the pores of porous materials.The local void produced by the escape of polar solvent facilitates non-polar solvent containing metallic precursor to be dragged into the narrow pores,followed by further reduction,resulting in the complete encapsulation of nanoparticles.A series of metal nanoparticles@porous materials,ranging from metal-organic frameworks(MOFs)to zeolites,are successfully prepared by this method and show excellent size selectivity in catalytic reactions.展开更多
Based on the observation data of meteorological observation stations in Jining City during 1970-2024,MK mutation test and principal component analysis(PCA)were used to study the evolution characteristics of urban heat...Based on the observation data of meteorological observation stations in Jining City during 1970-2024,MK mutation test and principal component analysis(PCA)were used to study the evolution characteristics of urban heat island intensity(UHII)and the contribution rate of various influencing factors in Jining City over the past 55 years.The results show that from 1970 to 2024,the UHII in Jining City generally rose at a rate of 0.1℃/10 a.On the interannual scale,the correlation between temperature and UHII was most significantly positive.On the seasonal scale,there was a strong negative correlation between wind speed and UHII.PCA reveals that temperature had a significant positive impact on the increase of UHII in Jining City.展开更多
In this paper,an experiment system of wind-energy stirring heater has been designed and built.Its heating performance under the rotation speed of 300 r/min has been studied through changing stirring rotor’s layer num...In this paper,an experiment system of wind-energy stirring heater has been designed and built.Its heating performance under the rotation speed of 300 r/min has been studied through changing stirring rotor’s layer number or using different working fluids.With the help of CFD numerical simulation method,we studied the influence factors including temperature rise,total heat,heating power of each experimental group,and analyzed why these factors have such an effect.The results show:increasing the layer number of the stirring rotors can increase the motion intensity of working fluid and improve the heating effect;the quantity of effective working fluid in the rotor area can be increased significantly with the increasing of liquid level;the working liquid with high density,low viscosity,low specific heat capacity will be the ideal one.展开更多
A zonal domain primitive equation modeling system(ZDMS)is used to study the effects of the initial heating anomalies over the Tibetan Plateau and the western Pacific on the East Asian and the Chinese summer climate,th...A zonal domain primitive equation modeling system(ZDMS)is used to study the effects of the initial heating anomalies over the Tibetan Plateau and the western Pacific on the East Asian and the Chinese summer climate,the relative importance and the mechanisms are discussed.Results show that in spite of the different locations of the heating anomalies the influences of the two anomaly areas are much similar to each other when the scaling of the two areas is the same.The two areas of heating anomalies have their own affecting domains in which one is more important than the oth- er.In the western Pacific the heating anomaly over the western Pacific is more evident and in the Tibetan Plateau area the heating anomaly over the Tibetan Plateau is more obvious.For the east part of China the effects of the two heating anomalies both exist and almost have the equal impor- tance.The initial anomaly of the sea surface temperature(SST)over the western Pacific can be kept during the entire time integration while in the Tibetan Plateau it can not be maintained.展开更多
Mechanical properties of TC17 titanium alloy undergo a significant reduction after linear friction welding(LFW),of which the strength and ductility are hard to be improved simultaneously by traditional aging heat trea...Mechanical properties of TC17 titanium alloy undergo a significant reduction after linear friction welding(LFW),of which the strength and ductility are hard to be improved simultaneously by traditional aging heat treatment(AHT),seriously limiting the application of LFW in the manufacturing of TC17 titanium alloy blisks.To this end,the present work proposes to use electric pulse treatment(EPT)to enhance the strength and ductility of TC17 LFW joints simultaneously by improving its microstructure.The results show that,in comparison to the uneven distribution ofαphases in the welding zone(WZ),heat-affected zone(HAZ),and base metal(BM)zone after AHT,EPT can selectively homogenize theαphase distribution of WZ and HAZ without impacting the BM.The selective effect of EPT is reflected as the synergistic influence of the local Joule heating effect and the electron wind effect,which promotes the diffusion ofβphase stabilizing element Mo and leads to a competitive precipitation ofβphase andαphase in theαphase transition temperature range.The ratio ofαphase toβphase in the WZ and HAZ finally approaches an equilibrium point which is similar to that of BM,leading to a uniform distribution ofαphase and realizing the synergy of strength-ductility of LFW joint:the maximum strength increase observed is 12.9%,accompanied by a corresponding elongation increase of 122%(by AHT&EPT),and the maximum plasticity improvement is 185%,accompanied by a corresponding strength increase of 4.3%(by EPT for 1 h).This study provides essential insights for improving the strength and ductility of LFW TC17 titanium alloy blisks and enhancing the applications of LFW in aeroengine components.展开更多
Dielectrophoresis(DEP)technology has become important application of microfluidic technology to manipulate particles.By using a local modulating electric field to control the combination of electroosmotic microvortice...Dielectrophoresis(DEP)technology has become important application of microfluidic technology to manipulate particles.By using a local modulating electric field to control the combination of electroosmotic microvortices and DEP,our group proposed a device using a direct current(DC)electric field to achieve continuous particle separation.In this paper,the influence of the Joule heating effect on the continuous separation of particles is analyzed.Results show that the Joule heating effect is caused by the local electric field,and the Joule heating effect caused by adjusting the modulating voltage is more significant than that by driving voltage.Moreover,a non-uniform temperature distribution exists in the channel due to the Joule heating effect,and the temperature is the highest at the midpoint of the modulating electrodes.The channel flux can be enhanced,and the enhancement of both the channel flux and temperature is more obvious for a stronger Joule heating effect.In addition,the ability of the vortices to trap particles is enhanced since a larger DEP force is exerted on the particles with the Joule heating effect;and the ability of the vortex to capture particles is stronger with a stronger Joule heating effect.The separation efficiency can also be increased because perfect separation is achieved at a higher channel flux.Parameter optimization of the separation device,such as the convective heat transfer coefficient of the channel wall,the length of modulating electrode,and the width of the channel,is performed.展开更多
The application of laser pulses with psec or shorter duration enables nonthermal efficient ultrahigh acceleration of plasma blocks with homogeneous high ion energies exceeding ion current densities of 10^(12) A cm^(-2...The application of laser pulses with psec or shorter duration enables nonthermal efficient ultrahigh acceleration of plasma blocks with homogeneous high ion energies exceeding ion current densities of 10^(12) A cm^(-2). The effects of ultrahigh acceleration of plasma blocks with high energy proton beams are proposed for muon production in a compact magnetic fusion device. The proposed new scheme consists of an ignition fusion spark by muon catalyzed fusion(μCF) in a small mirror-like configuration where low temperature D–T plasma is trapped for a duration of 1 μs. This initial fusion spark produces sufficient alpha heating in order to initiate the fusion process in the main device. The use of a multi-fluid global particle and energy balance code allows us to follow the temporal evolution of the reaction rate of the fusion process in the device. Recent progress on the ICAN and IZEST projects for high efficient high power and high repetition rate laser systems allows development of the proposed device for clean energy production. With the proposed approaches,experiments on fusion nuclear reactions and μCF process can be performed in magnetized plasmas in existing kJ/PW laser facilities as the GEKKO-LFEX, the PETAL and the ORION or in the near future laser facilities as the ELI-NP Romanian pillar.展开更多
The accelerating urbanization process and intensifying climate change have exacerbated the urban heat island effect, threatening sustainable urban development. This study investigates the role of green infrastructure ...The accelerating urbanization process and intensifying climate change have exacerbated the urban heat island effect, threatening sustainable urban development. This study investigates the role of green infrastructure in mitigating urban heat island effects, its implementation challenges, and applications. Employing a system dynamics approach, the research models the relationships between green infrastructure, urban microclimate, and human well-being. Findings indicate that large, continuous green spaces, such as urban parks and green corridors, are most effective, potentially reducing surrounding temperatures by 1˚C - 4˚C. Green infrastructure also provides multiple ecosystem services, including improved air quality and increased biodiversity. However, its implementation faces challenges such as land resource limitations and financial constraints. To address these issues, the study proposes a performance-based planning method, emphasizing multifunctional design and cross-sectoral collaboration. Through analysis of international and Chinese urban case studies, best practices and lessons learned are summarized. The research demonstrates that successful strategies must be context-specific, integrating local conditions while emphasizing long-term planning and continuous optimization. This study provides a scientific basis for developing effective heat island mitigation strategies and climate adaptation plans, ultimately achieving sustainable urban development and improved living environments.展开更多
In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest a...In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest access. Urban Heat Island Effects are measurable phenomenon that are being experienced by the world’s most urbanized areas, including increased summer high temperatures and lower evapotranspiration from having impervious surfaces instead of vegetation and trees. Tree canopy cover is our natural mitigation tool that absorbs sunlight for photosynthesis, protects humans from incoming radiation, and releases cooling moisture into the air. Unfortunately, urban areas typically have low levels of vegetation. Vulnerable urban communities are lower-income areas of inner cities with less access to heat protection like air conditioners. This study uses mean evapotranspiration levels to assess the variability of urban heat island effects across the state of Tennessee. Results show that increased developed land surface cover in Tennessee creates measurable changes in atmospheric evapotranspiration. As a result, the mean evapotranspiration levels in areas with less tree vegetation are significantly lower than the surrounding forested areas. Central areas of urban cities in Tennessee had lower mean evapotranspiration recordings than surrounding areas with less development. This work demonstrates the need for increased tree canopy coverage.展开更多
Ultrafast electron sources, which enable high spatiotemporal resolution in time-resolved electron microscopy and scanning probe microscopy, are receiving increased attention. The most widely used method for achieving ...Ultrafast electron sources, which enable high spatiotemporal resolution in time-resolved electron microscopy and scanning probe microscopy, are receiving increased attention. The most widely used method for achieving ultrafast electron sources involves irradiating metal tips by ultrashort laser pulses, causing electron beam emission via the photoelectric effect [including photon-driven(quantum) or field-driven(classical) emission]. However, the thermionic electrons emission process due to the heating effect of ultrashort lasers, particularly its dynamic aspects, has rarely been addressed in previous studies. In this paper, we improved the signal-to-noise ratio of a two-pulse correlation measurement on the tip electron emission by nearly two orders of magnitude using a delay time modulation method. This allowed us to obtain information on the temperature evolution of hot electrons and phonons in a non-equilibrium state, and to extract characteristic time scales for electron-phonon and phonon-phonon scattering. Our findings indicate that the thermionic electrons emission, unlike the instantaneous photoelectric effect, causes electron emission to lag behind the laser pulse by tens of picoseconds, thus significantly affecting the detection of ultrafast dynamics of samples. Furthermore, such a lagging effect was found to be sensitive to the local structure of the metal tip, offering new insights into the improved design of ultrafast electron sources.展开更多
The characteristics of adsorption, desorption, and diffusion of gas in tectonic coal are important for the prediction of coal and gas outbursts. Three types of coal samples, of which both metamorphic grade and degree ...The characteristics of adsorption, desorption, and diffusion of gas in tectonic coal are important for the prediction of coal and gas outbursts. Three types of coal samples, of which both metamorphic grade and degree of damage is different, were selected from Tongchun, Qilin, and Pingdingshan mines. Using a series of experiments in an electrostatic field, we analyzed the characteristics of gas adsorption and diffusion in tectonic coal. We found that gas adsorption in coal conforms to the Langmuir equation in an electrostatic field. Both the depth of the adsorption potential well and the coal molecular electroneg- ativity increases under the action of an electrostatic field. A Joule heating effect was caused by changing the coal-gas system conductivity in an electrostatic field. The quantity of gas adsorbed and AP result from competition between the depth of the adsorption potential well, the coal molecular electronegativ- ity, and the Joule heating effect. △P peaks when the three factors control behavior equally. Compared with anthracite, the impact of the electrostatic field on the gas diffusion capacity of middle and high rank coals is greater. Compared with the original coal, the gas adsorption quantity,△P, and the gas diffusion capacity of tectonic coal are greater in an electrostatic field. In addition, the smaller the particle size of tectonic coal, the larger the△P.展开更多
The rotary gas-gas heat exchanger(GGH)is a vital component in waste heat recovery systems,partic-ularly for Selective Catalytic Reduction(SCR)processes employed in cement kiln operations.This study investigates the th...The rotary gas-gas heat exchanger(GGH)is a vital component in waste heat recovery systems,partic-ularly for Selective Catalytic Reduction(SCR)processes employed in cement kiln operations.This study investigates the thermal performance of a rotary GGH in medium-and low-temperature denitrification systems,using a simplified porous medium model based on its actual internal structure.A porous medium representation is developed from the structural characteristics of the most efficient heat transfer element,and a local thermal non-equilibrium(LTNE)model is employed to capture the distinct thermal behaviors of the solid matrix and gas phase.To account for the rotational dynamics of the system,the multiple reference frame(MRF)approach is adopted.Numerical simulation results exhibit an average error of less than 5%,demonstrating the model’s reliability and predictive accuracy.The temperature distributions of both the metallic heat exchange surfaces and the flue gas are systematically analyzed.Results indicate that the solid and gas phases exhibit significant non-equilibrium thermal behavior.Notably,the circumferential temperature fluctuations of both the heat exchange surfaces and flue gas vary markedly with changes in rotational speed.At low rotational speeds,the temperature non-uniformity coefficient reaches 4.296,while at high speeds it decreases to 0.4813-indicating that lower speeds lead to more pronounced temperature fluctuations.The simulated temperature field patterns are consistent with experimental observations,validating the effectiveness of the modeling approach.展开更多
Urbanization’s impact on pre-monsoon extreme rainfall in the Greater Bay Area(GBA),coastal South China(SC),and its relation to different synoptic systems remains understudied.This research investigates urbanization e...Urbanization’s impact on pre-monsoon extreme rainfall in the Greater Bay Area(GBA),coastal South China(SC),and its relation to different synoptic systems remains understudied.This research investigates urbanization effects on premonsoon rainfall using hourly station observations and Weather Research and Forecasting model with the Single Layer Urban Canopy Model(WRF-SLUCM)simulations.Observations show stronger pre-monsoon extreme rainfall in GBA cities than surrounding rural areas,with the urban heat island(UHI)intensifying the urban rainfall intensity and probability.Extreme cases were classified into frontal and shear-line warm-sector types.Enhanced urban rainfall due to UHI was more pronounced under shear-line and warm-sector systems.Four frontal and four shear-line cases were dynamically downscaled using WRF-SLUCM,and four parallel experiments were conducted:“Nourban”(urban areas replaced by cropland),“AH0”,“AH100”,and“AH300”[normal land use,with the diurnal maximum anthropogenic heat(AH)set to 0,100,and 300 W m^(−2)in SLUCM,respectively].In frontal cases,significantly reduced urban rainfall in AH0 is due to decreased(enhanced)surface evaporation(wind divergence)in cities compared to cropland.Strong northerly winds and cold-air intrusion suppress the UHI in AH0 and AH100 during the rainfall process;enhanced urban rainfall occurs only in AH300.In contrast,for shear-line cases,urban friction and UHI promote local convection and wind convergence,increasing urban rainfall significantly in all urban experiments compared to Nourban.Overall,urbanization’s influence on SC’s premonsoon extreme rainfall is highly sensitive to the type of synoptic systems,necessitating further investigation of urban rainfall in this season.展开更多
[Objective] The aim was to analyse the variation characteristics of temperature in Anqing City and urban heat island effect.[Method] Based on the observation data of temperature from Anqing Station,other surrounding m...[Objective] The aim was to analyse the variation characteristics of temperature in Anqing City and urban heat island effect.[Method] Based on the observation data of temperature from Anqing Station,other surrounding meteorological stations and local automatic meteorological stations in suburbs,the annual variation of temperature and regional consistency was analysed,then the abrupt change of annual average temperature was tested by Mann-Kendall test,finally the influences of urban heat island effect on temperature variation in Anqing Station were studied.[Result] Affected by station migration and urban construction,the annual average temperature increased significantly in Anqing Station from 1977 to 2009,and the rising was more prominent after the middle of the 1990s.Mann-Kendall test showed that the change of temperature in Anqing Station was obviously abrupt around 1993;because of the development of urbanization,average temperature in Anqing Station was 0.8 ℃ higher than that in suburbs,and the minimum temperature rose more remarkably.In addition,urban heat island effect was the strongest in spring,followed by summer and autumn,while it was the weakest in winter.[Conclusion] The effects of urbanization development on the temperature in Anqing City were understood through this research.展开更多
Alterations made to the natural ground surface and the anthropogenic activity elevate the surface and air temperature in the urban areas compared with the surrounding rural areas,known as urban heat island effect.Ther...Alterations made to the natural ground surface and the anthropogenic activity elevate the surface and air temperature in the urban areas compared with the surrounding rural areas,known as urban heat island effect.Thermal remote sensors measure the radiation emitted by ground objects,which can be used to estimate the land surface temperature and are beneficial for studying urban heat island effects.The present study investigates the spatial and temporal variations in the effects of urban heat island over Tiruchirappalli city in India during the summer and winter seasons.The study also identifies hot spots and cold spots within the study area.In this study,a significant land surface temperature difference was observed between the urban and rural areas,predominantly at night,indicating the presence of urban heat island at night.These diurnal land surface temperature fluctuations are also detected seasonally,with a relatively higher temperature intensity during the summer.The trend line analysis shows that the mean land surface temperature of the study area is increasing at a rate of 0.166 K/decade with p less than 0.01.By using the spatial autocorrelation method with the urban heat island index as the key parameter,hot spots with a 99 percent confidence level and a 95 percent confidence level were found within the urban area.A hot spot with 95 and 90 percent confidence level was identified outside the urban area.This spike in temperature for a particular region in the rural area is due to industry and the associated built-up area.The study also identified cold spots with a 90 percent confidence level within the rural area.However,cold spots with a 95 and 99 percent confidence level were not identified within the study area.展开更多
基金Project supported by the National Natural Science Foundation of China(11374291,11274299 and 11204292)
文摘An abnormal fluorescence intensity ratio （FIR） between two green emissions of Er3＋, at room temperature, which is larger than a normal value, emerged in many reported articles. However, up to now detailed work has seldom been done to clarify this abnormal phenomenon. In this paper, green upconversion luminescence of the β-NaLuF4：20%yb3＋,2%Er3＋ powder sample was investigated under 980 um excitation at different circumstances, different pump power densities and different temperatures as well as different air pressures. The corresponding local temperature calculated using FIR technique increased gradually with the enhancement of the pump power density. It was demonstrated that high pump power density of 980 nm laser led to the increase of local temperature of the luminescent material, which further gave the abnormal FIR.
文摘Nanofluids have attracted many scientists due to their remarkable thermophysical properties.Small percentage of nanoparticles when added to conventional fluid significantly enhances the heat transfer features.Sustainability and efficiency of nanomaterials have key role in the advancement of nanotechnology.This article analyzes the Hall,Ohmic heating and velocity slip effects on the peristalsis of nanofluid.Convective boundary conditions and heat generation/absorption are considered to facilitate the heat transfer characteristics.Governing equations for the peristaltic flow through a curved channel are derived in curvilinear coordinates.The equations are numerically solved under the assumption of long wavelength and small Reynold number.It has been observed that nanofluid enhances the heat transfer rate and reduces the fluid temperature.Hartman number and Hall parameter show reverse behavior in fluid motion and heat transfer characteristics.In the presence of velocity slip,the pressure gradient rapidly decreases and dominant effect is seen in narrow portion of channel.
基金Projects(30571779,10775085) supported by the National Natural Science Foundation of ChinaProject(Z07000200540704) supported by Beijing Municipal Science and Technology Commission,China
文摘Fe3O4 magnetic nanoparticles with diameters varying from 10 to 426 nm were synthesized and characterized.Heating effects of Fe3O4 magnetic nanoparticles under radiofrequency capacitive field(RCF) with frequency of 27.12 MHz and power of 60-150 W were investigated.When the power of RCF is lower than 90 W,temperatures of Fe3O4 magnetic nanoparticles(75-150 mg/mL) can be raised and maximal temperatures are all lower than 50 ℃.When the power of RCF is 90-150 W,temperatures of Fe3O4 magnetic nanoparticles can be quickly raised and are all obviously higher than those of normal saline and distilled water under the same conditions.Temperature of Fe3O4 magnetic nanoparticles can even reach 70.2 ℃ under 150 W RCF.Heating effects of Fe3O4 magnetic nanoparticles are related to RCF power,particle size and particle concentration.
基金supported by the National Natural Science Foundation of China (Nos.10872076 and 50805059)
文摘This paper presents a numerical analysis of Joule heating effect of electroosmo- sis in a finite-length microchannel made of the glass and polydimethylsiloxane （PDMS） polymer. The Poisson-Boltzmann equation of electric double layer, the Navier-Stokes equation of liquid flow, and the liquid-solid coupled heat transfer equation are solved to investigate temperature behaviors of electroosmosis in a two-dimensional microchannel. The feedback effect of temperature variation on liquid properties （dielectric constant, vis- cosity, and thermal and electric conductivities） is taken into account. Numerical results indicate that there exists a heat developing length near the channel inlet where the flow velocity, temperature, pressure, and electric field rapidly vary and then approach to a steady state after the heat developing length, which may occupy a considerable portion of the microchannel in cases of thick chip and high electric field. The liquid temperature of steady state increases with the increase of the applied electric field, channel width, and chip thickness. The temperature on a PDMS wall is higher than that on a glass wall due to the difference of heat conductivities of materials. Temperature variations are found in the both longitudinal and transverse directions of the microchannel. The increase of the temperature on the wall decreases the charge density of the electric double layer. The longitudinal temperature variation induces a pressure gradient and changes the behavior of the electric field in the microchannel. The inflow liquid temperature does not change the liquid temperature of steady state and the heat developing length.
基金Project supported by Hi-Tech Research and Development Program of China (Grant Nos. 2007AA05Z436 and 2009AA050602)Science and Technology Support Project of Tianjin (Grant No. 08ZCKFGX03500)+3 种基金National Basic Research Program of China(Grant Nos. 2006CB202602 and 2006CB202603)National Natural Science Foundation of China (Grant No. 60976051)International Cooperation Project between China-Greece Government (Grant Nos. 2006DFA62390 and 2009DFA62580)Program for New Century Excellent Talents in University of China (Grant No. NCET-08-0295)
文摘A possible heating effect on the process of high deposition rate microcrystalline silicon has been studied. It includes the discharge time-accumulating heating effect, discharge power, inter-electrode distance, and total gas flow rate induced heating effect. It is found that the heating effects mentioned above are in some ways quite similar to and in other ways very different from each other. However, all of them will directly or indirectly cause the increase of the substrate surface temperature during the process of depositing microcrystalline silicon thin films, which will affect the properties of the materials with increasing time. This phenomenon is very serious for the high deposition rate of microcrystalline silicon thin films because of the high input power and the relatively small inter-electrode distance needed. Through analysis of the heating effects occurring in the process of depositing microcrystalline silicon, it is proposed that the discharge power and the heating temperature should be as low as possible, and the total gas flow rate and the inter-electrode distance should be suitable so that device-grade high quality deposition rate microcrystalline silicon thin films can be fabricated.
基金supported by the National Natural Science Foundation of China(Nos.21908105,21971114 and 62288102)the Nanjing Municipal Science and Technology Innovation Project.
文摘Metal nanoparticle@porous material composites have attracted increasing attention due to their excellent synergistic catalytic performance.However,it is a challenge to introduce metal nanoparticles into cavities of porous materials without agglomeration on the exterior.Despite the progress achieved,a universal approach that can integrate different kinds of metal nanoparticles and porous materials is still highly desirable.Here we report a facile and general approach to fabricating metal nanoparticle@porous materials by microwave-triggered selective heating.The microwave can pass through the non-polar solvent and act on the polar solvent in the porous materials,causing the polar solvent to be heated,vaporized,and away from the pores of porous materials.The local void produced by the escape of polar solvent facilitates non-polar solvent containing metallic precursor to be dragged into the narrow pores,followed by further reduction,resulting in the complete encapsulation of nanoparticles.A series of metal nanoparticles@porous materials,ranging from metal-organic frameworks(MOFs)to zeolites,are successfully prepared by this method and show excellent size selectivity in catalytic reactions.
基金Supported by the Project of Jining Meteorological Bureau(2024JNZL08).
文摘Based on the observation data of meteorological observation stations in Jining City during 1970-2024,MK mutation test and principal component analysis(PCA)were used to study the evolution characteristics of urban heat island intensity(UHII)and the contribution rate of various influencing factors in Jining City over the past 55 years.The results show that from 1970 to 2024,the UHII in Jining City generally rose at a rate of 0.1℃/10 a.On the interannual scale,the correlation between temperature and UHII was most significantly positive.On the seasonal scale,there was a strong negative correlation between wind speed and UHII.PCA reveals that temperature had a significant positive impact on the increase of UHII in Jining City.
基金supported by the National Vegetable Industry System(No.CARS-23-C05)the Yangling Demonstration Zone Science and Technology Project(No.2018NY-09)the Key R&D Project of Shaanxi Provinc(2019TSLNY01-03)。
文摘In this paper,an experiment system of wind-energy stirring heater has been designed and built.Its heating performance under the rotation speed of 300 r/min has been studied through changing stirring rotor’s layer number or using different working fluids.With the help of CFD numerical simulation method,we studied the influence factors including temperature rise,total heat,heating power of each experimental group,and analyzed why these factors have such an effect.The results show:increasing the layer number of the stirring rotors can increase the motion intensity of working fluid and improve the heating effect;the quantity of effective working fluid in the rotor area can be increased significantly with the increasing of liquid level;the working liquid with high density,low viscosity,low specific heat capacity will be the ideal one.
基金Supported by the National Key Project of Fundamental Research:The Land-Air Physical Processes over the Tibetan Plateau(TIPEX).
文摘A zonal domain primitive equation modeling system(ZDMS)is used to study the effects of the initial heating anomalies over the Tibetan Plateau and the western Pacific on the East Asian and the Chinese summer climate,the relative importance and the mechanisms are discussed.Results show that in spite of the different locations of the heating anomalies the influences of the two anomaly areas are much similar to each other when the scaling of the two areas is the same.The two areas of heating anomalies have their own affecting domains in which one is more important than the oth- er.In the western Pacific the heating anomaly over the western Pacific is more evident and in the Tibetan Plateau area the heating anomaly over the Tibetan Plateau is more obvious.For the east part of China the effects of the two heating anomalies both exist and almost have the equal impor- tance.The initial anomaly of the sea surface temperature(SST)over the western Pacific can be kept during the entire time integration while in the Tibetan Plateau it can not be maintained.
基金the National Science Fund for Distinguished Young Scholars(No.52225505)the National Sci-ence and Technology Major Project(No.J2019-VII-0014-0154)+1 种基金the National Natural Science Foundation of China(No.52005412)the Open Research Fund of State Key Laboratory of Precision Man-ufacturing for Extreme Service Performance(No.Kfkt2023-12)for financial supports given to this research.
文摘Mechanical properties of TC17 titanium alloy undergo a significant reduction after linear friction welding(LFW),of which the strength and ductility are hard to be improved simultaneously by traditional aging heat treatment(AHT),seriously limiting the application of LFW in the manufacturing of TC17 titanium alloy blisks.To this end,the present work proposes to use electric pulse treatment(EPT)to enhance the strength and ductility of TC17 LFW joints simultaneously by improving its microstructure.The results show that,in comparison to the uneven distribution ofαphases in the welding zone(WZ),heat-affected zone(HAZ),and base metal(BM)zone after AHT,EPT can selectively homogenize theαphase distribution of WZ and HAZ without impacting the BM.The selective effect of EPT is reflected as the synergistic influence of the local Joule heating effect and the electron wind effect,which promotes the diffusion ofβphase stabilizing element Mo and leads to a competitive precipitation ofβphase andαphase in theαphase transition temperature range.The ratio ofαphase toβphase in the WZ and HAZ finally approaches an equilibrium point which is similar to that of BM,leading to a uniform distribution ofαphase and realizing the synergy of strength-ductility of LFW joint:the maximum strength increase observed is 12.9%,accompanied by a corresponding elongation increase of 122%(by AHT&EPT),and the maximum plasticity improvement is 185%,accompanied by a corresponding strength increase of 4.3%(by EPT for 1 h).This study provides essential insights for improving the strength and ductility of LFW TC17 titanium alloy blisks and enhancing the applications of LFW in aeroengine components.
基金Project supported by the National Natural Science Foundation of China(Grant No.11572139).
文摘Dielectrophoresis(DEP)technology has become important application of microfluidic technology to manipulate particles.By using a local modulating electric field to control the combination of electroosmotic microvortices and DEP,our group proposed a device using a direct current(DC)electric field to achieve continuous particle separation.In this paper,the influence of the Joule heating effect on the continuous separation of particles is analyzed.Results show that the Joule heating effect is caused by the local electric field,and the Joule heating effect caused by adjusting the modulating voltage is more significant than that by driving voltage.Moreover,a non-uniform temperature distribution exists in the channel due to the Joule heating effect,and the temperature is the highest at the midpoint of the modulating electrodes.The channel flux can be enhanced,and the enhancement of both the channel flux and temperature is more obvious for a stronger Joule heating effect.In addition,the ability of the vortices to trap particles is enhanced since a larger DEP force is exerted on the particles with the Joule heating effect;and the ability of the vortex to capture particles is stronger with a stronger Joule heating effect.The separation efficiency can also be increased because perfect separation is achieved at a higher channel flux.Parameter optimization of the separation device,such as the convective heat transfer coefficient of the channel wall,the length of modulating electrode,and the width of the channel,is performed.
文摘The application of laser pulses with psec or shorter duration enables nonthermal efficient ultrahigh acceleration of plasma blocks with homogeneous high ion energies exceeding ion current densities of 10^(12) A cm^(-2). The effects of ultrahigh acceleration of plasma blocks with high energy proton beams are proposed for muon production in a compact magnetic fusion device. The proposed new scheme consists of an ignition fusion spark by muon catalyzed fusion(μCF) in a small mirror-like configuration where low temperature D–T plasma is trapped for a duration of 1 μs. This initial fusion spark produces sufficient alpha heating in order to initiate the fusion process in the main device. The use of a multi-fluid global particle and energy balance code allows us to follow the temporal evolution of the reaction rate of the fusion process in the device. Recent progress on the ICAN and IZEST projects for high efficient high power and high repetition rate laser systems allows development of the proposed device for clean energy production. With the proposed approaches,experiments on fusion nuclear reactions and μCF process can be performed in magnetized plasmas in existing kJ/PW laser facilities as the GEKKO-LFEX, the PETAL and the ORION or in the near future laser facilities as the ELI-NP Romanian pillar.
文摘The accelerating urbanization process and intensifying climate change have exacerbated the urban heat island effect, threatening sustainable urban development. This study investigates the role of green infrastructure in mitigating urban heat island effects, its implementation challenges, and applications. Employing a system dynamics approach, the research models the relationships between green infrastructure, urban microclimate, and human well-being. Findings indicate that large, continuous green spaces, such as urban parks and green corridors, are most effective, potentially reducing surrounding temperatures by 1˚C - 4˚C. Green infrastructure also provides multiple ecosystem services, including improved air quality and increased biodiversity. However, its implementation faces challenges such as land resource limitations and financial constraints. To address these issues, the study proposes a performance-based planning method, emphasizing multifunctional design and cross-sectoral collaboration. Through analysis of international and Chinese urban case studies, best practices and lessons learned are summarized. The research demonstrates that successful strategies must be context-specific, integrating local conditions while emphasizing long-term planning and continuous optimization. This study provides a scientific basis for developing effective heat island mitigation strategies and climate adaptation plans, ultimately achieving sustainable urban development and improved living environments.
文摘In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest access. Urban Heat Island Effects are measurable phenomenon that are being experienced by the world’s most urbanized areas, including increased summer high temperatures and lower evapotranspiration from having impervious surfaces instead of vegetation and trees. Tree canopy cover is our natural mitigation tool that absorbs sunlight for photosynthesis, protects humans from incoming radiation, and releases cooling moisture into the air. Unfortunately, urban areas typically have low levels of vegetation. Vulnerable urban communities are lower-income areas of inner cities with less access to heat protection like air conditioners. This study uses mean evapotranspiration levels to assess the variability of urban heat island effects across the state of Tennessee. Results show that increased developed land surface cover in Tennessee creates measurable changes in atmospheric evapotranspiration. As a result, the mean evapotranspiration levels in areas with less tree vegetation are significantly lower than the surrounding forested areas. Central areas of urban cities in Tennessee had lower mean evapotranspiration recordings than surrounding areas with less development. This work demonstrates the need for increased tree canopy coverage.
基金supported by the National Key R&D Program under Grant No.2021YFA1400500the National Natural Science Foundation of China under Grant No.22273029+1 种基金the New Cornerstone Science Foundation through the New Cornerstone Investigator Program under Grant No.NCI202303 and the XPLORER PRIZEthe Beijing Outstanding Young Scientist Program under Grant No.JWZQ20240101002。
文摘Ultrafast electron sources, which enable high spatiotemporal resolution in time-resolved electron microscopy and scanning probe microscopy, are receiving increased attention. The most widely used method for achieving ultrafast electron sources involves irradiating metal tips by ultrashort laser pulses, causing electron beam emission via the photoelectric effect [including photon-driven(quantum) or field-driven(classical) emission]. However, the thermionic electrons emission process due to the heating effect of ultrashort lasers, particularly its dynamic aspects, has rarely been addressed in previous studies. In this paper, we improved the signal-to-noise ratio of a two-pulse correlation measurement on the tip electron emission by nearly two orders of magnitude using a delay time modulation method. This allowed us to obtain information on the temperature evolution of hot electrons and phonons in a non-equilibrium state, and to extract characteristic time scales for electron-phonon and phonon-phonon scattering. Our findings indicate that the thermionic electrons emission, unlike the instantaneous photoelectric effect, causes electron emission to lag behind the laser pulse by tens of picoseconds, thus significantly affecting the detection of ultrafast dynamics of samples. Furthermore, such a lagging effect was found to be sensitive to the local structure of the metal tip, offering new insights into the improved design of ultrafast electron sources.
基金the National Natural Science Foundation of China(No.41272177)the Henan Polytechnic University Doctor Foundation(No.WS2013A11)
文摘The characteristics of adsorption, desorption, and diffusion of gas in tectonic coal are important for the prediction of coal and gas outbursts. Three types of coal samples, of which both metamorphic grade and degree of damage is different, were selected from Tongchun, Qilin, and Pingdingshan mines. Using a series of experiments in an electrostatic field, we analyzed the characteristics of gas adsorption and diffusion in tectonic coal. We found that gas adsorption in coal conforms to the Langmuir equation in an electrostatic field. Both the depth of the adsorption potential well and the coal molecular electroneg- ativity increases under the action of an electrostatic field. A Joule heating effect was caused by changing the coal-gas system conductivity in an electrostatic field. The quantity of gas adsorbed and AP result from competition between the depth of the adsorption potential well, the coal molecular electronegativ- ity, and the Joule heating effect. △P peaks when the three factors control behavior equally. Compared with anthracite, the impact of the electrostatic field on the gas diffusion capacity of middle and high rank coals is greater. Compared with the original coal, the gas adsorption quantity,△P, and the gas diffusion capacity of tectonic coal are greater in an electrostatic field. In addition, the smaller the particle size of tectonic coal, the larger the△P.
基金supported the Eco-Environment Project of the Key Research and Development Program of Anhui Province(No.202104i07020016).
文摘The rotary gas-gas heat exchanger(GGH)is a vital component in waste heat recovery systems,partic-ularly for Selective Catalytic Reduction(SCR)processes employed in cement kiln operations.This study investigates the thermal performance of a rotary GGH in medium-and low-temperature denitrification systems,using a simplified porous medium model based on its actual internal structure.A porous medium representation is developed from the structural characteristics of the most efficient heat transfer element,and a local thermal non-equilibrium(LTNE)model is employed to capture the distinct thermal behaviors of the solid matrix and gas phase.To account for the rotational dynamics of the system,the multiple reference frame(MRF)approach is adopted.Numerical simulation results exhibit an average error of less than 5%,demonstrating the model’s reliability and predictive accuracy.The temperature distributions of both the metallic heat exchange surfaces and the flue gas are systematically analyzed.Results indicate that the solid and gas phases exhibit significant non-equilibrium thermal behavior.Notably,the circumferential temperature fluctuations of both the heat exchange surfaces and flue gas vary markedly with changes in rotational speed.At low rotational speeds,the temperature non-uniformity coefficient reaches 4.296,while at high speeds it decreases to 0.4813-indicating that lower speeds lead to more pronounced temperature fluctuations.The simulated temperature field patterns are consistent with experimental observations,validating the effectiveness of the modeling approach.
基金supported by CUHK Strategic Impact Enhancement Fund(project no.3135536)Guangdong Basic and Applied Basic Research Foundation(2023B1515020029).
文摘Urbanization’s impact on pre-monsoon extreme rainfall in the Greater Bay Area(GBA),coastal South China(SC),and its relation to different synoptic systems remains understudied.This research investigates urbanization effects on premonsoon rainfall using hourly station observations and Weather Research and Forecasting model with the Single Layer Urban Canopy Model(WRF-SLUCM)simulations.Observations show stronger pre-monsoon extreme rainfall in GBA cities than surrounding rural areas,with the urban heat island(UHI)intensifying the urban rainfall intensity and probability.Extreme cases were classified into frontal and shear-line warm-sector types.Enhanced urban rainfall due to UHI was more pronounced under shear-line and warm-sector systems.Four frontal and four shear-line cases were dynamically downscaled using WRF-SLUCM,and four parallel experiments were conducted:“Nourban”(urban areas replaced by cropland),“AH0”,“AH100”,and“AH300”[normal land use,with the diurnal maximum anthropogenic heat(AH)set to 0,100,and 300 W m^(−2)in SLUCM,respectively].In frontal cases,significantly reduced urban rainfall in AH0 is due to decreased(enhanced)surface evaporation(wind divergence)in cities compared to cropland.Strong northerly winds and cold-air intrusion suppress the UHI in AH0 and AH100 during the rainfall process;enhanced urban rainfall occurs only in AH300.In contrast,for shear-line cases,urban friction and UHI promote local convection and wind convergence,increasing urban rainfall significantly in all urban experiments compared to Nourban.Overall,urbanization’s influence on SC’s premonsoon extreme rainfall is highly sensitive to the type of synoptic systems,necessitating further investigation of urban rainfall in this season.
文摘[Objective] The aim was to analyse the variation characteristics of temperature in Anqing City and urban heat island effect.[Method] Based on the observation data of temperature from Anqing Station,other surrounding meteorological stations and local automatic meteorological stations in suburbs,the annual variation of temperature and regional consistency was analysed,then the abrupt change of annual average temperature was tested by Mann-Kendall test,finally the influences of urban heat island effect on temperature variation in Anqing Station were studied.[Result] Affected by station migration and urban construction,the annual average temperature increased significantly in Anqing Station from 1977 to 2009,and the rising was more prominent after the middle of the 1990s.Mann-Kendall test showed that the change of temperature in Anqing Station was obviously abrupt around 1993;because of the development of urbanization,average temperature in Anqing Station was 0.8 ℃ higher than that in suburbs,and the minimum temperature rose more remarkably.In addition,urban heat island effect was the strongest in spring,followed by summer and autumn,while it was the weakest in winter.[Conclusion] The effects of urbanization development on the temperature in Anqing City were understood through this research.
基金funded this research through grant NITT/R&C/SEED GRANT/2021e22/P.14.
文摘Alterations made to the natural ground surface and the anthropogenic activity elevate the surface and air temperature in the urban areas compared with the surrounding rural areas,known as urban heat island effect.Thermal remote sensors measure the radiation emitted by ground objects,which can be used to estimate the land surface temperature and are beneficial for studying urban heat island effects.The present study investigates the spatial and temporal variations in the effects of urban heat island over Tiruchirappalli city in India during the summer and winter seasons.The study also identifies hot spots and cold spots within the study area.In this study,a significant land surface temperature difference was observed between the urban and rural areas,predominantly at night,indicating the presence of urban heat island at night.These diurnal land surface temperature fluctuations are also detected seasonally,with a relatively higher temperature intensity during the summer.The trend line analysis shows that the mean land surface temperature of the study area is increasing at a rate of 0.166 K/decade with p less than 0.01.By using the spatial autocorrelation method with the urban heat island index as the key parameter,hot spots with a 99 percent confidence level and a 95 percent confidence level were found within the urban area.A hot spot with 95 and 90 percent confidence level was identified outside the urban area.This spike in temperature for a particular region in the rural area is due to industry and the associated built-up area.The study also identified cold spots with a 90 percent confidence level within the rural area.However,cold spots with a 95 and 99 percent confidence level were not identified within the study area.
