Solid-state battery(SSB)with lithium metal anode(LMA)is considered as one of the most promising storage devices for the next generation.To simultaneously address two critical issues in lithium metal batteries:the nega...Solid-state battery(SSB)with lithium metal anode(LMA)is considered as one of the most promising storage devices for the next generation.To simultaneously address two critical issues in lithium metal batteries:the negative impact of interfacial compatibility on the electrochemical performance and the safety risks associated with Li dendrite growth-we propose a dual in-situ strategy for fabricating SSBs.Herein,the excellent cycling performance and improved safety of polymer SSB under dual in-situ strategy was confirmed.The lower Li nucleation barrier of Sn leads to uniform Li deposition on the modified-Li(ModLi)/solid-state electrolyte(SSE)interface.LiF-enriched layer on LMA contributes to capacity retention of 92%after 550 cycles in LiFePO_(4)SSB.The modified layer provides outstanding dendrite suppression ability under an overcharge condition of 5.5 V.The higher thermal stability of SSE than liquid electrolyte was investigated through in-situ heat and gas generation analysis,with ModLi+SSE generating only 9.9%of Li+SSE.Higher cycling stability of SSB was demonstrated through in-situ cycling heat generation analysis,and lower temperature sensitivity of SSB with 31%of heat production decrease from 30 to 70℃,while LIBs show a 54%reduction.Excellent high-temperature stability was proved by a 92%capacity retention at 60℃after 50 cycles.Ultimately,pouch cells with SSE of higher thermal stability and modifications on LMA achieved a higher self-heating onset temperature(Tonset)of 180℃and a lower thermal runaway maximum temperature(T_(max))of 401℃,The impacts of dual in-situ strategy for materials,interfaces,coin cells and pouch cells aid in further understanding on thermal runaway mechanism of SSB.展开更多
In order to improve the heat transfer characteristics of the traditional phase change material（PCM） floor, a new double-layer radiant floor system with PCM is proposed, which can store thermal or cold energy in the ...In order to improve the heat transfer characteristics of the traditional phase change material（PCM） floor, a new double-layer radiant floor system with PCM is proposed, which can store thermal or cold energy in the off-peak period and use them in the peak period. An experimental setup was developed to study the heat transfer characteristics of the new system under both cooling and heating modes. The experimental results show that the double-layer radiant floor system with PCM can meet both the cold and thermal requirements of users. Moreover, with the same duration of the thermal energy storage process, the increase of water temperature supplied to the system can improve the heat transfer characteristics of the system but lead to the discomfort of users. On the other hand, if the air temperature at the end of the thermal energy storage process is the same under different conditions, the increase of supplied water temperature will decrease the thermal energy storage time and ensure the comfort of users.展开更多
By reduction to one dimensional, periodic as well as rotating pulse heat sources, investigation on heat transfer characteristics with rotating body is carried out. Similar to the fluid flow, a new set of dimensionless...By reduction to one dimensional, periodic as well as rotating pulse heat sources, investigation on heat transfer characteristics with rotating body is carried out. Similar to the fluid flow, a new set of dimensionless numbers, namely quasi-Peclet numbers Pe 1, Pe 2 and Biot number Bi composed of angular velocity ω , thermophysical parameter, and geometry size are proposed, and applied to the dimensionless equations. Simulation result shows that it plays a decisive role in the process of the heat transfer. However, more important is that the numerical simulation depicts the difference between microcosmic and macroscopic structures of the temperature distribution, and reveals the influence of the relative relation of the dimensionless criterion numbers upon heat transfer characteristics.展开更多
The thermal protection of rocket engines is a crucial aspect of rocket engine design.In this paper,the gas film/regenerative composite cooling of the liquid oxygen/liquid methane(LOX/LCH4)rocket engine thrust chamber ...The thermal protection of rocket engines is a crucial aspect of rocket engine design.In this paper,the gas film/regenerative composite cooling of the liquid oxygen/liquid methane(LOX/LCH4)rocket engine thrust chamber was investigated.A gas film/regenerative composite cooling model was developed based on the Grisson gas film cooling efficiency formula and the one-dimensional regenerative cooling model.The accuracy of the model was validated through experiments conducted on a 6 kg/s level gas film/regenerative composite cooling thrust chamber.Additionally,key parameters related to heat transfer performance were calculated.The results demonstrate that the model is sufficiently accurate to be used as a preliminary design tool.The temperature rise error of the coolant,when compared with the experimental results,was found to be less than 10%.Although the pressure drop error is relatively large,the calculated results still provide valuable guidance for heat transfer analysis.In addition,the performance of composite cooling is observed to be superior to regenerative cooling.Increasing the gas film flow rate results in higher cooling efficiency and a lower gas-side wall temperature.Furthermore,the position at which the gas film is introduced greatly impacts the cooling performance.The optimal introduction position for the gas film is determined when the film is introduced from a single row of holes.This optimal introduction position results in a more uniform wall temperature distribution and reduces the peak temperature.Lastly,it is observed that a double row of holes,when compared to a single row of holes,enhances the cooling effect in the superposition area of the gas film and further lowers the gas-side wall temperature.These results provide a basis for the design of gas film/regenerative composite cooling systems.展开更多
Heat transfer characteristics in a narrow confined channel with discrete impingement cooling were investigated using thermal infrared camera. Detailed heat transfer distributions and comparisons on three surfaces with...Heat transfer characteristics in a narrow confined channel with discrete impingement cooling were investigated using thermal infrared camera. Detailed heat transfer distributions and comparisons on three surfaces with three impact diameters were experimentally studied in the range of Reynolds number of 3000 to 30000. The experimental results indicated that the strong impingement jet leaded to a high strength heat transfer zone in the ΔX=±2.5D;range of the impact center,which was 1.3–2.5 times of the average heat transfer value of the impingement wall. With the same coolant mass flow rate, small diameter case had lower heat transfer coefficient on both inner wall and outside wall, while the impingement wall was insensitive to the impact diameter. The surface averaged Nusselt number of inner wall was only 43%–57% of impingement wall, while the outside wall can reach up to 80%–90%. The larger the diameter, the higher heat transfer enhancement and the smaller the channel flow resistance was observed in term of Reynolds number. The surface averaged Nusselt numbers were developed as the function of Reynolds number and the impingement height-to-diameter for further engineering applications.展开更多
Nano fluid is considered to be a class of high efficient heat transfer fluid created by dispersing some special solid nanoparticles (normally less than 100 nm) in traditional heat transfer fluid. The present experimen...Nano fluid is considered to be a class of high efficient heat transfer fluid created by dispersing some special solid nanoparticles (normally less than 100 nm) in traditional heat transfer fluid. The present experiment was conducted aiming at investigating the forced heat transfer characteristics of aqueous copper (Cu) nanofluid at varying concentration of Cu nano-particles in different flow regimes (300<Re≤16 000). The forced convective heat transfer enhancement is available both in the laminar and turbulent flow with increasing the concentration. Especially, the enhancement rate increases dramatically in laminar flow regime, for instance, the heat transfer coefficient of Cu/water nanofluid increases by two times at around Re=2 000 compared with that of base fluid water, and averagely increases by 62% at 1% volume fraction. However, the heat transfer coefficient of Cu/water decreases sharply in the transition flow regime. Furthermore, it has the trend that the heat transfer coefficient displays worse with increasing the concentration.展开更多
In order to realize safe and stable operation of a water-cooled W/Cu divertor under high heating condition,the exact knowledge of its subcooled boiling heat transfer characteristics under different design parameters i...In order to realize safe and stable operation of a water-cooled W/Cu divertor under high heating condition,the exact knowledge of its subcooled boiling heat transfer characteristics under different design parameters is crucial.In this paper,subcooled boiling heat transfer in a water-cooled W/Cu divertor was numerically investigated based on computational fluid dynamic（CFD）.The boiling heat transfer was simulated based on the Euler homogeneous phase model,and local differences of liquid physical properties were considered under one-sided high heating conditions.The calculated wall temperature was in good agreement with experimental results,with the maximum error of 5%only.On this basis,the void fraction distribution,flow field and heat transfer coefficient（HTC）distribution were obtained.The effects of heat flux,inlet velocity and inlet temperature on temperature distribution and pressure drop of a water-cooled W/Cu divertor were also investigated.These results provide a valuable reference for the thermal-hydraulic design of a water-cooled W/Cu divertor.展开更多
A vapor-liquid-solid horizontal circulating fluidized bed evaporation setup was constructed to study the thermal-exchange properties and pressure change.The influences of the operating variables,including the amount o...A vapor-liquid-solid horizontal circulating fluidized bed evaporation setup was constructed to study the thermal-exchange properties and pressure change.The influences of the operating variables,including the amount of added particles,heat flux,and circulating flow velocity,were systematically inspected using resistance temperature detectors and pressure sensors.The results showed that the heat transfer eff ect was improved with the increase in the amount of added particles,circulating flow velocity,and particle diameter,but decreased with increasing heat flux.The pressure drop fluctuated with the increase in operating parameters,except circulating flow velocity.The enhancing factor reached up to 71.5%.The enhancing fac-tor initially increased and then decreased with the increase in the amount of added particles and circulating flow velocity,fluctuated with increasing particle diameter,and decreased with increasing heat flux.Phase diagrams showing the variation ranges of the operation variables for the enhancing factor were constructed.展开更多
An experimental study of bioheat transfer characteristics induced bypulsed-laser irradiation was presented. The heat transfer characteristics of bio-materials, and theinfluences of pulse duration, power density, speci...An experimental study of bioheat transfer characteristics induced bypulsed-laser irradiation was presented. The heat transfer characteristics of bio-materials, and theinfluences of pulse duration, power density, species of bio-materials, thickness and initialmoisture content of bio-materials on heat transfer were studied in details. The experimental resultsindicate that the penetration and absorption of laser in bio-materials are considerable, the heattransfer inside the bio-materials should include the effects of volumetric absorption, pulseduration, power density, bio-materials thickness, and material species have a significant influenceon the temperature variation.展开更多
The water-cooling heat dissipation technology can solve the heat dissipation and noise problems of the calculation plate.Therefore,the structural design of the water-cooling plate directly affects its flow and heat tr...The water-cooling heat dissipation technology can solve the heat dissipation and noise problems of the calculation plate.Therefore,the structural design of the water-cooling plate directly affects its flow and heat transfer characteristics,which restricts the promotion and application of the technology.To this end,the water-cooling plate of a heat dissipation system was taken as the research object,and its flow and heat transfer characteristics were numerical simulated and experimental studied.Through comparative analysis,the rationality of the numerical simulation method was verified.Based on this,three improved schemes of water-cooling plate structure were proposed and numerical simulation was carried out,and the optimal model was verified by experiments.The results of the study show that compared with the original water-cooling plate,the optimized water-cooling plate has increased internal flow velocity and distributes uniformly,increased heat transfer amount by 4.2%,and the average temperature of the calculation plate decreased by 5.3%.展开更多
Experiments were conducted to study the general room temperature corrosion characteristics of heat-treated and non-heat-treated Al-Li alloys with different Li compositions. Corrosion rate was measured using both the p...Experiments were conducted to study the general room temperature corrosion characteristics of heat-treated and non-heat-treated Al-Li alloys with different Li compositions. Corrosion rate was measured using both the polarisation method and the weight-loss method. It was observed that the samples with higher Li content had lower corrosion resistance than those with lower Li content. Moreover, for all the specimens tested, it was fOund that heat treatment at 180℃ for 2 h (for the purpose of precipitation hardening) severely reduced the corrosion resistance,whereas heat treatment at 180℃ for 6 h significantly increased the corrosion resistance.展开更多
High-temperature,high-power converters have gained importance in industrial applications given their ability to operate in adverse environments,such as in petroleum exploration,multi-electric aircrafts,and electric ve...High-temperature,high-power converters have gained importance in industrial applications given their ability to operate in adverse environments,such as in petroleum exploration,multi-electric aircrafts,and electric vehicles.SiC metaloxide-semiconductor field-effect transistor(MOSFET),a new,wide bandgap,high-temperature device,is the key component of these converters.In this study,the static and dynamic characteristics of the SiC MOSFET,half-bridge module,are investigated at the junction temperature of 180℃.A simplified experimental method is then proposed pertaining to the power operation of the SiC module at 180℃.This method is based on the use of a thermal resistance test platform and is proven convenient for the study of heat dissipation characteristics.The high-temperature characteristics of the module are verified based on the conducted experiments.Accordingly,a 100 kW high-temperature converter is built,and the test results show that the SiC converter can operate at a junction temperature of 180℃in a stable manner in compliance with the requirements of high-temperature,high-power applications.展开更多
In order to study the effect of heat flux and inlet temperature on the fouling characteristics of nanoparticles, and to further reveal the fouling mechanism for insights into proper operating conditions, γ-Al_2O_3/wa...In order to study the effect of heat flux and inlet temperature on the fouling characteristics of nanoparticles, and to further reveal the fouling mechanism for insights into proper operating conditions, γ-Al_2O_3/water suspensions were chosen as the subject of this research. The particulate fouling characteristics of γ-Al_2O_3/water suspensions on the surface of stainless steel have been experimentally studied by varying the heat flux and the inlet temperature under single-phase flow and subcooled-flow boiling conditions. The results show that in the condition of single-phase flow, the asymptotic value of fouling resistance decreases with increasing of heat flux and inlet temperature. The asymptotic value of fouling resistance under single-phase flow is much higher than for the subcooled-flow boiling condition. The effect of heat flux on the fouling resistance under the two flow states has an inverse relationship, and there exists a minimum value of fouling resistance between these two states. For subcooled-flow boiling, the asymptotic value of fouling resistance increases with increasing heat flux, whereas the effect on fouling resistance by the inlet temperature is negligible.展开更多
Spiral plate heat exchanger is a traditional compact heat exchanger,and widely used in the occasion of the high heat transfer capacity requirements,such as waste heat recovery. In the situation of energy shortage and ...Spiral plate heat exchanger is a traditional compact heat exchanger,and widely used in the occasion of the high heat transfer capacity requirements,such as waste heat recovery. In the situation of energy shortage and rapid development of heat transfer technology^([1-3]),cylindrical,elliptical and rhombic spiral pile-honeycomb heat transfer models are established^([4-5]). The internal flow and heat transfer are simulated by using CFD software FLUENT15. 0 and RNG k-ε turbulent model,and then the three models are analyzed. The results show that the secondary flow and vortex are induced again in the secondary honeycomb,which further increases the turbulence intensity of the fluid. The thickness of the boundary layer is reduced twice,and the heat transfer effect is better than that of the honeycomb spiral structure. The spiral pile-honeycomb model for the rhombus is better than the models of cylinder and ellipse in heat transfer performance.展开更多
Targeting spontaneous coal combustion during stacking,we developed an efficient heat dissipation&self-supplied wireless temperature measurement system(SPWTM)with gravity heat pipe-thermoelectric integration for du...Targeting spontaneous coal combustion during stacking,we developed an efficient heat dissipation&self-supplied wireless temperature measurement system(SPWTM)with gravity heat pipe-thermoelectric integration for dual safety.The heat transfer characteristics and temperature measurement optimization of the system are experimentally investigated and verified in practical applications.The results show that,firstly,the effects of coal pile heat production power and burial depth,along with heat pipe startup and heat transfer characteristics.At 60 cmburial depth,the condensation section dissipates 98%coal pile heat via natural convection.Secondly,for the temperature measurement error caused by the heat pipe heat transfer temperature difference,the correction method of“superimposing the measured value with the heat transfer temperature difference”is proposed,and the higher the coal temperature,the better the temperature measurement accuracy.Finally,the system can quickly(≤1 h)reduce the temperature of the coal pile to the spontaneous combustion point,significantly inhibiting the spontaneous combustion phenomenon,the maximum temperature does not exceed 49.2℃.Meanwhile,it utilizes waste heat to drive thermoelectric power generation,realizing self-supplied,unattended,and long-term accurate temperature measurement and warning.In a word,synergistic active heat dissipation and self-powered temperature monitoring-warning ensure dual coal pile thermal safety.展开更多
Aiming at solving problems of low efficiency,low cable capacity in current 300m open-pit mine cable winding truck,a 900 m cable winding plan was proposed.In this paper,the mechanism of the thermal effect of the cable ...Aiming at solving problems of low efficiency,low cable capacity in current 300m open-pit mine cable winding truck,a 900 m cable winding plan was proposed.In this paper,the mechanism of the thermal effect of the cable was described,and a two-dimensional axisymmetric electromagnetic-fluid-temperature multiphysics coupling model of the cable reel was established regarding the 900m cable reel as independent system.Considering the structure of the drum,the number of cable winding layers,the factors of heat conduction,heat radiation and convective heat transfer in the actual working process,the steady state analysis of the multi-physical field coupling was carried out.The sum of the losses of each part of the cable was obtained through the calculation of electromagnetic field,which was used as a heat source to calculate and analyze the temperature distribution of different layers of cable winding,as well as the temperature distribution and heat dissipation characteristics of different structures of the drum.The results show that three layers of cable winding is the best design.The lowest temperature of closed cylindrical drum is 70℃after heat dissipation,which has obvious advantages compared with the lowest temperature of 85℃after heat dissipation of squirrel-cage cylindrical drum.The results provide a reliable theoretical basis for the research and development of a new type of mine cable winding truck with 900 m cable capacity.展开更多
Elastic heat transfer tube bundles are widely used in the field of flow-induced vibration heat transfer enhancement. Two types of mainly used tube bundles, the planar elastic tube bundle and the conical spiral tube bu...Elastic heat transfer tube bundles are widely used in the field of flow-induced vibration heat transfer enhancement. Two types of mainly used tube bundles, the planar elastic tube bundle and the conical spiral tube bundle were comprehensively compared in the condition of the same shell side diameter. The natural mode characteristics, the effect of fluid-structure interaction, the stress distribution, the comprehensive heat transfer performance and the secondary fluid flow of the two elastic tube bundles were all concluded and compared. The results show that the natural frequency and the critical velocity of vibration buckling of the planar elastic tube bundle are larger than those of the conical spiral tube bundle, while the stress distribution and the comprehensive heat transfer performance of the conical spiral tube bundle are relatively better.展开更多
This paper presents an experimental study on a flat plate closed loop pulsating heat pipes. It consisted of total 40 channels with square cross section （2 × 2 mm^2, 165 mm long） machined directly on an aluminum...This paper presents an experimental study on a flat plate closed loop pulsating heat pipes. It consisted of total 40 channels with square cross section （2 × 2 mm^2, 165 mm long） machined directly on an aluminum plate（180×120×3 nm^2）, which was covered by a transparent plate. The working fluid employed was ethanol. As the results, the influence parameters of thermal performance were investigated, such as filling ratio, heat load and operational orientations etc. Filling ratio was found to be a critical parameter, and its effect was rather complicated. According to its values the PHP plate could have four distinct working zones with different operational characteristics and heat transfer performance. The effect of heat load on thermal performance was found to be positive, and in general, iucrcasing the heat load would improve heat transfer performance. In order to analyze the effect of gravity on thermal performance, three different heat modes and total seven tilt angles were tested and compared. Successful operation at all orientations with respect to gravity was also achieved.展开更多
The cascade model was tested using transient liquid crystal temperature measurement technology.The effects of main flow Reynolds number,blowing ratio and tip clearance height on the convective heat transfer coefficien...The cascade model was tested using transient liquid crystal temperature measurement technology.The effects of main flow Reynolds number,blowing ratio and tip clearance height on the convective heat transfer coefficient of the turbine outer ring were studied.Two feature lines were marked on the turbine outer ring corresponding to the position of the blade.The conclusions are as follows:The tip clearance leakage flow has a great influence on the convective heat transfer coefficient of the turbine outer ring.When the clearance height and the blowing ratio are kept constant,gradually increasing the main flow Reynolds number will result in an increase in the convective heat transfer coefficient of the turbine outer ring.When the clearance height and the main flow Reynolds number are kept constant and the blowing ratio is gradually increased,the convective heat transfer coefficient of the turbine outer ring is almost constant.The heat transfer coefficient of the turbine outer ring surface is little affected by the blowing ratio;The clearance height has great influence on the heat transfer characteristics of the turbine outer ring.Under the typical working condition in this paper,when the tip clearance height ratio is 1.6%,the convective heat transfer coefficient of the outer surface of the turbine is the highest.展开更多
The surface and atmospheric heating fields over the Qinghai-Xizang Plateau are computed by using the observational data of solar radiation during 1982—1983.The mian results are as follows:The central and northern par...The surface and atmospheric heating fields over the Qinghai-Xizang Plateau are computed by using the observational data of solar radiation during 1982—1983.The mian results are as follows:The central and northern parts of the Plateau act as heat sinks in winter from November to January.Both eastern and south- ern parts of the Plateau are of heat sources.In summer,the main part of the Plateau acts as a strong heat source,and the center of the heating field is in the southeastern Plateau.However the main part of the Plateau acts as a heat sink for the atmospheric heating fields from October to March.The maximum intensity of the atmospheric heat sink over the central Plateau appears in December and January.From April to September,the main part of the Plateau acts as a heat source for the atmospheric heating fields.展开更多
基金supported by the Key-Area Research and Development Program of Guangdong Province(2024B1111080001)the National Natural Science Foundation of China(52204248 and 52474258)Youth Innovation Promotion Association CAS(Y201768)。
文摘Solid-state battery(SSB)with lithium metal anode(LMA)is considered as one of the most promising storage devices for the next generation.To simultaneously address two critical issues in lithium metal batteries:the negative impact of interfacial compatibility on the electrochemical performance and the safety risks associated with Li dendrite growth-we propose a dual in-situ strategy for fabricating SSBs.Herein,the excellent cycling performance and improved safety of polymer SSB under dual in-situ strategy was confirmed.The lower Li nucleation barrier of Sn leads to uniform Li deposition on the modified-Li(ModLi)/solid-state electrolyte(SSE)interface.LiF-enriched layer on LMA contributes to capacity retention of 92%after 550 cycles in LiFePO_(4)SSB.The modified layer provides outstanding dendrite suppression ability under an overcharge condition of 5.5 V.The higher thermal stability of SSE than liquid electrolyte was investigated through in-situ heat and gas generation analysis,with ModLi+SSE generating only 9.9%of Li+SSE.Higher cycling stability of SSB was demonstrated through in-situ cycling heat generation analysis,and lower temperature sensitivity of SSB with 31%of heat production decrease from 30 to 70℃,while LIBs show a 54%reduction.Excellent high-temperature stability was proved by a 92%capacity retention at 60℃after 50 cycles.Ultimately,pouch cells with SSE of higher thermal stability and modifications on LMA achieved a higher self-heating onset temperature(Tonset)of 180℃and a lower thermal runaway maximum temperature(T_(max))of 401℃,The impacts of dual in-situ strategy for materials,interfaces,coin cells and pouch cells aid in further understanding on thermal runaway mechanism of SSB.
基金The National Science and Technology Pillar Program during the 12th Five-Year Plan Period(No.2011BAJ03B14)the National Natural Science Foundation of China(No.51376044)
文摘In order to improve the heat transfer characteristics of the traditional phase change material（PCM） floor, a new double-layer radiant floor system with PCM is proposed, which can store thermal or cold energy in the off-peak period and use them in the peak period. An experimental setup was developed to study the heat transfer characteristics of the new system under both cooling and heating modes. The experimental results show that the double-layer radiant floor system with PCM can meet both the cold and thermal requirements of users. Moreover, with the same duration of the thermal energy storage process, the increase of water temperature supplied to the system can improve the heat transfer characteristics of the system but lead to the discomfort of users. On the other hand, if the air temperature at the end of the thermal energy storage process is the same under different conditions, the increase of supplied water temperature will decrease the thermal energy storage time and ensure the comfort of users.
文摘By reduction to one dimensional, periodic as well as rotating pulse heat sources, investigation on heat transfer characteristics with rotating body is carried out. Similar to the fluid flow, a new set of dimensionless numbers, namely quasi-Peclet numbers Pe 1, Pe 2 and Biot number Bi composed of angular velocity ω , thermophysical parameter, and geometry size are proposed, and applied to the dimensionless equations. Simulation result shows that it plays a decisive role in the process of the heat transfer. However, more important is that the numerical simulation depicts the difference between microcosmic and macroscopic structures of the temperature distribution, and reveals the influence of the relative relation of the dimensionless criterion numbers upon heat transfer characteristics.
基金supported by the National Science Fund Project(No.2019-JCJQ-ZQ-019)the Innovative Research Group Project of National Natural Science Foundation of China(No.T2221002).
文摘The thermal protection of rocket engines is a crucial aspect of rocket engine design.In this paper,the gas film/regenerative composite cooling of the liquid oxygen/liquid methane(LOX/LCH4)rocket engine thrust chamber was investigated.A gas film/regenerative composite cooling model was developed based on the Grisson gas film cooling efficiency formula and the one-dimensional regenerative cooling model.The accuracy of the model was validated through experiments conducted on a 6 kg/s level gas film/regenerative composite cooling thrust chamber.Additionally,key parameters related to heat transfer performance were calculated.The results demonstrate that the model is sufficiently accurate to be used as a preliminary design tool.The temperature rise error of the coolant,when compared with the experimental results,was found to be less than 10%.Although the pressure drop error is relatively large,the calculated results still provide valuable guidance for heat transfer analysis.In addition,the performance of composite cooling is observed to be superior to regenerative cooling.Increasing the gas film flow rate results in higher cooling efficiency and a lower gas-side wall temperature.Furthermore,the position at which the gas film is introduced greatly impacts the cooling performance.The optimal introduction position for the gas film is determined when the film is introduced from a single row of holes.This optimal introduction position results in a more uniform wall temperature distribution and reduces the peak temperature.Lastly,it is observed that a double row of holes,when compared to a single row of holes,enhances the cooling effect in the superposition area of the gas film and further lowers the gas-side wall temperature.These results provide a basis for the design of gas film/regenerative composite cooling systems.
基金supported by Hunan Provincial Natural Science Foundation of China(No.2019JJ50701)。
文摘Heat transfer characteristics in a narrow confined channel with discrete impingement cooling were investigated using thermal infrared camera. Detailed heat transfer distributions and comparisons on three surfaces with three impact diameters were experimentally studied in the range of Reynolds number of 3000 to 30000. The experimental results indicated that the strong impingement jet leaded to a high strength heat transfer zone in the ΔX=±2.5D;range of the impact center,which was 1.3–2.5 times of the average heat transfer value of the impingement wall. With the same coolant mass flow rate, small diameter case had lower heat transfer coefficient on both inner wall and outside wall, while the impingement wall was insensitive to the impact diameter. The surface averaged Nusselt number of inner wall was only 43%–57% of impingement wall, while the outside wall can reach up to 80%–90%. The larger the diameter, the higher heat transfer enhancement and the smaller the channel flow resistance was observed in term of Reynolds number. The surface averaged Nusselt numbers were developed as the function of Reynolds number and the impingement height-to-diameter for further engineering applications.
基金supported by Basic Science Research Program through the National Research Foundation of Korea (NRF)funded by the Ministry of Education, Science and Technology (No.2012-0004544)
文摘Nano fluid is considered to be a class of high efficient heat transfer fluid created by dispersing some special solid nanoparticles (normally less than 100 nm) in traditional heat transfer fluid. The present experiment was conducted aiming at investigating the forced heat transfer characteristics of aqueous copper (Cu) nanofluid at varying concentration of Cu nano-particles in different flow regimes (300<Re≤16 000). The forced convective heat transfer enhancement is available both in the laminar and turbulent flow with increasing the concentration. Especially, the enhancement rate increases dramatically in laminar flow regime, for instance, the heat transfer coefficient of Cu/water nanofluid increases by two times at around Re=2 000 compared with that of base fluid water, and averagely increases by 62% at 1% volume fraction. However, the heat transfer coefficient of Cu/water decreases sharply in the transition flow regime. Furthermore, it has the trend that the heat transfer coefficient displays worse with increasing the concentration.
基金supported by the National Magnetic Confinement Fusion Science Program of China(No.2010GB104005)Funding of Jiangsu Innovation Program for Graduate Education(CXLX12.0170)the Fundamental Research Funds for the Central Universities of China
文摘In order to realize safe and stable operation of a water-cooled W/Cu divertor under high heating condition,the exact knowledge of its subcooled boiling heat transfer characteristics under different design parameters is crucial.In this paper,subcooled boiling heat transfer in a water-cooled W/Cu divertor was numerically investigated based on computational fluid dynamic（CFD）.The boiling heat transfer was simulated based on the Euler homogeneous phase model,and local differences of liquid physical properties were considered under one-sided high heating conditions.The calculated wall temperature was in good agreement with experimental results,with the maximum error of 5%only.On this basis,the void fraction distribution,flow field and heat transfer coefficient（HTC）distribution were obtained.The effects of heat flux,inlet velocity and inlet temperature on temperature distribution and pressure drop of a water-cooled W/Cu divertor were also investigated.These results provide a valuable reference for the thermal-hydraulic design of a water-cooled W/Cu divertor.
基金supported by the open foundation of State Key Laboratory of Chemical Engineering(No.SKL-ChE-18B03)by the Municipal Science and Technology Commission of Tianjin,China(No.2009ZCKFGX01900).
文摘A vapor-liquid-solid horizontal circulating fluidized bed evaporation setup was constructed to study the thermal-exchange properties and pressure change.The influences of the operating variables,including the amount of added particles,heat flux,and circulating flow velocity,were systematically inspected using resistance temperature detectors and pressure sensors.The results showed that the heat transfer eff ect was improved with the increase in the amount of added particles,circulating flow velocity,and particle diameter,but decreased with increasing heat flux.The pressure drop fluctuated with the increase in operating parameters,except circulating flow velocity.The enhancing factor reached up to 71.5%.The enhancing fac-tor initially increased and then decreased with the increase in the amount of added particles and circulating flow velocity,fluctuated with increasing particle diameter,and decreased with increasing heat flux.Phase diagrams showing the variation ranges of the operation variables for the enhancing factor were constructed.
基金This research was financially supported by the Chinese National Key Foundation Research Subject (No.G2000026305), National Natural Science Foundation of China (No.50276060), and the director foundation of Institute of Engineering Thermophysics, Chinese A
文摘An experimental study of bioheat transfer characteristics induced bypulsed-laser irradiation was presented. The heat transfer characteristics of bio-materials, and theinfluences of pulse duration, power density, species of bio-materials, thickness and initialmoisture content of bio-materials on heat transfer were studied in details. The experimental resultsindicate that the penetration and absorption of laser in bio-materials are considerable, the heattransfer inside the bio-materials should include the effects of volumetric absorption, pulseduration, power density, bio-materials thickness, and material species have a significant influenceon the temperature variation.
文摘The water-cooling heat dissipation technology can solve the heat dissipation and noise problems of the calculation plate.Therefore,the structural design of the water-cooling plate directly affects its flow and heat transfer characteristics,which restricts the promotion and application of the technology.To this end,the water-cooling plate of a heat dissipation system was taken as the research object,and its flow and heat transfer characteristics were numerical simulated and experimental studied.Through comparative analysis,the rationality of the numerical simulation method was verified.Based on this,three improved schemes of water-cooling plate structure were proposed and numerical simulation was carried out,and the optimal model was verified by experiments.The results of the study show that compared with the original water-cooling plate,the optimized water-cooling plate has increased internal flow velocity and distributes uniformly,increased heat transfer amount by 4.2%,and the average temperature of the calculation plate decreased by 5.3%.
文摘Experiments were conducted to study the general room temperature corrosion characteristics of heat-treated and non-heat-treated Al-Li alloys with different Li compositions. Corrosion rate was measured using both the polarisation method and the weight-loss method. It was observed that the samples with higher Li content had lower corrosion resistance than those with lower Li content. Moreover, for all the specimens tested, it was fOund that heat treatment at 180℃ for 2 h (for the purpose of precipitation hardening) severely reduced the corrosion resistance,whereas heat treatment at 180℃ for 6 h significantly increased the corrosion resistance.
基金supported by the National Key R&D Program of China (grant no. 2017YFB0903303)
文摘High-temperature,high-power converters have gained importance in industrial applications given their ability to operate in adverse environments,such as in petroleum exploration,multi-electric aircrafts,and electric vehicles.SiC metaloxide-semiconductor field-effect transistor(MOSFET),a new,wide bandgap,high-temperature device,is the key component of these converters.In this study,the static and dynamic characteristics of the SiC MOSFET,half-bridge module,are investigated at the junction temperature of 180℃.A simplified experimental method is then proposed pertaining to the power operation of the SiC module at 180℃.This method is based on the use of a thermal resistance test platform and is proven convenient for the study of heat dissipation characteristics.The high-temperature characteristics of the module are verified based on the conducted experiments.Accordingly,a 100 kW high-temperature converter is built,and the test results show that the SiC converter can operate at a junction temperature of 180℃in a stable manner in compliance with the requirements of high-temperature,high-power applications.
基金Supported by the National Natural Science Foundation of China(51476025)
文摘In order to study the effect of heat flux and inlet temperature on the fouling characteristics of nanoparticles, and to further reveal the fouling mechanism for insights into proper operating conditions, γ-Al_2O_3/water suspensions were chosen as the subject of this research. The particulate fouling characteristics of γ-Al_2O_3/water suspensions on the surface of stainless steel have been experimentally studied by varying the heat flux and the inlet temperature under single-phase flow and subcooled-flow boiling conditions. The results show that in the condition of single-phase flow, the asymptotic value of fouling resistance decreases with increasing of heat flux and inlet temperature. The asymptotic value of fouling resistance under single-phase flow is much higher than for the subcooled-flow boiling condition. The effect of heat flux on the fouling resistance under the two flow states has an inverse relationship, and there exists a minimum value of fouling resistance between these two states. For subcooled-flow boiling, the asymptotic value of fouling resistance increases with increasing heat flux, whereas the effect on fouling resistance by the inlet temperature is negligible.
文摘Spiral plate heat exchanger is a traditional compact heat exchanger,and widely used in the occasion of the high heat transfer capacity requirements,such as waste heat recovery. In the situation of energy shortage and rapid development of heat transfer technology^([1-3]),cylindrical,elliptical and rhombic spiral pile-honeycomb heat transfer models are established^([4-5]). The internal flow and heat transfer are simulated by using CFD software FLUENT15. 0 and RNG k-ε turbulent model,and then the three models are analyzed. The results show that the secondary flow and vortex are induced again in the secondary honeycomb,which further increases the turbulence intensity of the fluid. The thickness of the boundary layer is reduced twice,and the heat transfer effect is better than that of the honeycomb spiral structure. The spiral pile-honeycomb model for the rhombus is better than the models of cylinder and ellipse in heat transfer performance.
基金supported by the Engineering Research Centre for Digital Grid Technology for Coordinating New Energy under Grant[Grant number 2021GCZX003]Yunnan Fundamental Research Projects under Grant[Grant number 202301CF070031]+2 种基金Hundred Talents Project 2023 under Grant[Grant number B0201001]2024 Distinctive Innovation Scientific Research Projects for Higher Education Institutions[Grant number 2024KTSCX157]Young Innovative Talent Project under Grant[Grant numbers K0223021,K0224014].
文摘Targeting spontaneous coal combustion during stacking,we developed an efficient heat dissipation&self-supplied wireless temperature measurement system(SPWTM)with gravity heat pipe-thermoelectric integration for dual safety.The heat transfer characteristics and temperature measurement optimization of the system are experimentally investigated and verified in practical applications.The results show that,firstly,the effects of coal pile heat production power and burial depth,along with heat pipe startup and heat transfer characteristics.At 60 cmburial depth,the condensation section dissipates 98%coal pile heat via natural convection.Secondly,for the temperature measurement error caused by the heat pipe heat transfer temperature difference,the correction method of“superimposing the measured value with the heat transfer temperature difference”is proposed,and the higher the coal temperature,the better the temperature measurement accuracy.Finally,the system can quickly(≤1 h)reduce the temperature of the coal pile to the spontaneous combustion point,significantly inhibiting the spontaneous combustion phenomenon,the maximum temperature does not exceed 49.2℃.Meanwhile,it utilizes waste heat to drive thermoelectric power generation,realizing self-supplied,unattended,and long-term accurate temperature measurement and warning.In a word,synergistic active heat dissipation and self-powered temperature monitoring-warning ensure dual coal pile thermal safety.
基金This work was supported in part by 2019 Local Project of Science and Tech nology Research Service of Liaoning Provincial Department of Education(LJ2019FL003)by 2019 Science and Technology Research and Innovation Te am Project of Liaoning Provincial Department of Education(LT2019007)by 2020 Youth Science and Technology Talents"Nursery"Projects of Scient ific Research of Liaoning Province Education Department(LJ2020QNL019).
文摘Aiming at solving problems of low efficiency,low cable capacity in current 300m open-pit mine cable winding truck,a 900 m cable winding plan was proposed.In this paper,the mechanism of the thermal effect of the cable was described,and a two-dimensional axisymmetric electromagnetic-fluid-temperature multiphysics coupling model of the cable reel was established regarding the 900m cable reel as independent system.Considering the structure of the drum,the number of cable winding layers,the factors of heat conduction,heat radiation and convective heat transfer in the actual working process,the steady state analysis of the multi-physical field coupling was carried out.The sum of the losses of each part of the cable was obtained through the calculation of electromagnetic field,which was used as a heat source to calculate and analyze the temperature distribution of different layers of cable winding,as well as the temperature distribution and heat dissipation characteristics of different structures of the drum.The results show that three layers of cable winding is the best design.The lowest temperature of closed cylindrical drum is 70℃after heat dissipation,which has obvious advantages compared with the lowest temperature of 85℃after heat dissipation of squirrel-cage cylindrical drum.The results provide a reliable theoretical basis for the research and development of a new type of mine cable winding truck with 900 m cable capacity.
基金Projects(xjj2013104,08143063)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2011CB706606)supported by the National Basic Research Program of China
文摘Elastic heat transfer tube bundles are widely used in the field of flow-induced vibration heat transfer enhancement. Two types of mainly used tube bundles, the planar elastic tube bundle and the conical spiral tube bundle were comprehensively compared in the condition of the same shell side diameter. The natural mode characteristics, the effect of fluid-structure interaction, the stress distribution, the comprehensive heat transfer performance and the secondary fluid flow of the two elastic tube bundles were all concluded and compared. The results show that the natural frequency and the critical velocity of vibration buckling of the planar elastic tube bundle are larger than those of the conical spiral tube bundle, while the stress distribution and the comprehensive heat transfer performance of the conical spiral tube bundle are relatively better.
基金Supported by the Ger man National Science Foundation (DFG)(No. GR412/33)
文摘This paper presents an experimental study on a flat plate closed loop pulsating heat pipes. It consisted of total 40 channels with square cross section （2 × 2 mm^2, 165 mm long） machined directly on an aluminum plate（180×120×3 nm^2）, which was covered by a transparent plate. The working fluid employed was ethanol. As the results, the influence parameters of thermal performance were investigated, such as filling ratio, heat load and operational orientations etc. Filling ratio was found to be a critical parameter, and its effect was rather complicated. According to its values the PHP plate could have four distinct working zones with different operational characteristics and heat transfer performance. The effect of heat load on thermal performance was found to be positive, and in general, iucrcasing the heat load would improve heat transfer performance. In order to analyze the effect of gravity on thermal performance, three different heat modes and total seven tilt angles were tested and compared. Successful operation at all orientations with respect to gravity was also achieved.
文摘The cascade model was tested using transient liquid crystal temperature measurement technology.The effects of main flow Reynolds number,blowing ratio and tip clearance height on the convective heat transfer coefficient of the turbine outer ring were studied.Two feature lines were marked on the turbine outer ring corresponding to the position of the blade.The conclusions are as follows:The tip clearance leakage flow has a great influence on the convective heat transfer coefficient of the turbine outer ring.When the clearance height and the blowing ratio are kept constant,gradually increasing the main flow Reynolds number will result in an increase in the convective heat transfer coefficient of the turbine outer ring.When the clearance height and the main flow Reynolds number are kept constant and the blowing ratio is gradually increased,the convective heat transfer coefficient of the turbine outer ring is almost constant.The heat transfer coefficient of the turbine outer ring surface is little affected by the blowing ratio;The clearance height has great influence on the heat transfer characteristics of the turbine outer ring.Under the typical working condition in this paper,when the tip clearance height ratio is 1.6%,the convective heat transfer coefficient of the outer surface of the turbine is the highest.
文摘The surface and atmospheric heating fields over the Qinghai-Xizang Plateau are computed by using the observational data of solar radiation during 1982—1983.The mian results are as follows:The central and northern parts of the Plateau act as heat sinks in winter from November to January.Both eastern and south- ern parts of the Plateau are of heat sources.In summer,the main part of the Plateau acts as a strong heat source,and the center of the heating field is in the southeastern Plateau.However the main part of the Plateau acts as a heat sink for the atmospheric heating fields from October to March.The maximum intensity of the atmospheric heat sink over the central Plateau appears in December and January.From April to September,the main part of the Plateau acts as a heat source for the atmospheric heating fields.
