The heat input from arcs to weld pool in twin-arc gas metal arc welding （GMAW） with a common weld pool is investigated by high-speed photography. The characteristics of arc shapes and droplet transfer are studied an...The heat input from arcs to weld pool in twin-arc gas metal arc welding （GMAW） with a common weld pool is investigated by high-speed photography. The characteristics of arc shapes and droplet transfer are studied and then the models for heat flux distribution on top surface of weld pool and enthalpy distribution of metal droplets transferred into weld pool are established. By using the model, 3-D geometries of weld pools in twin-arc GMAW with a common weld pool are predicted. Corresponding welding experiments on mild steel plates are carried out and the results indicate that the predicted shape of weld bead on cross section shows good agreement with measured one.展开更多
Analytically solving a three-dimensional （3-D） bioheat transfer problem with phase change during a freezing process is extremely difficult but theoretically important. The moving heat source model and the Green func...Analytically solving a three-dimensional （3-D） bioheat transfer problem with phase change during a freezing process is extremely difficult but theoretically important. The moving heat source model and the Green function method are introduced to deal with the cryopreservation process of in vitro biomaterials. Exact solutions for the 3-D temperature transients of tissues under various boundary conditions, such as totally convective cooling, totally fixed temperature cooling and a hybrid between them on tissue surfaces, are obtained. Furthermore, the cryosurgical process in living tissues subject to freezing by a single or multiple cryoprobes is also analytically solved. A closed-form analytical solution to the bioheat phase change process is derived by considering contributions from blood perfusion heat transfer, metabolic heat generation, and heat sink of a cryoprobe. The present method is expected to have significant value for analytically solving complex bioheat transfer problems with phase change.展开更多
U型中深层地埋管换热器(U-bend Deep Borehole Heat Exchanger,UDBHE)具有广阔的应用前景。文章基于无限柱热源(Infinite Cylindrical Source,ICS)和无限线热源(Infinite Line Source,ILS)模型的G函数,建立了4种UDBHE传热模型,采用ICS或...U型中深层地埋管换热器(U-bend Deep Borehole Heat Exchanger,UDBHE)具有广阔的应用前景。文章基于无限柱热源(Infinite Cylindrical Source,ICS)和无限线热源(Infinite Line Source,ILS)模型的G函数,建立了4种UDBHE传热模型,采用ICS或ILS模型的G函数,考虑或忽略钻孔壁热流随时间变化,分别简称为ICS-q,ILS-q,ICS-c,ILS-c模型。通过与较为准确的二维数值模型及实验数据在2种边界条件下的对比,分析了这4种模型的准确性。结果表明:ILS-q模型在整体上最为准确,而ICS-q模型在分析UDBHE长期性能时最为准确;4种模型在前期均存在较大误差,但在足够长时间后,除了ILS-c和ICS-c模型在入口温度边界下仍有较大误差外,其他模型的误差均较小。研究结果可为UDBHE传热模型研究提供参考。展开更多
Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increas...Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.展开更多
In the present paper a combined procedure for the quasi-dimensional modelling of heat transfer,combustion and knock phenomena in a “downsized”Spark Ignition two-cylinder turbocharged engine is presented.The procedur...In the present paper a combined procedure for the quasi-dimensional modelling of heat transfer,combustion and knock phenomena in a “downsized”Spark Ignition two-cylinder turbocharged engine is presented.The procedure is extended to also include the effects consequent the Cyclic Variability.Heat transfer is modelled by means of a Finite Elements model.Combustion simulation is based on a fractal description of the flame front area.Cyclic Variability(CV)is characterized through the introduction of a random variation on a number of parameters controlling the rate of heat release(air/fuel ratio,initial flame kernel duration and radius,laminar flame speed,turbulence intensity).The intensity of the random variation is specified in order to realize a Coefficient Of Variation(COV)of the Indicated Mean Effective Pressure(IMEP)similar to the one measured during an experimental campaign.Moreover,the relative importance of the various concurring effects is established on the overall COV.A kinetic scheme is then solved within the unburned gas zone,characterized by different thermodynamic conditions occurring cycle-by-cycle.In this way,an optimal choice of the “knock-limited”spark advance is effected and compared with experimental data.Finally,the CV effects on the occurrence of individual knocking cycles are assessed and discussed.展开更多
基金Supported by National Natural Science Foundation of China （ No. 50575074） and the Scientific Research Foundation of QUST.
文摘The heat input from arcs to weld pool in twin-arc gas metal arc welding （GMAW） with a common weld pool is investigated by high-speed photography. The characteristics of arc shapes and droplet transfer are studied and then the models for heat flux distribution on top surface of weld pool and enthalpy distribution of metal droplets transferred into weld pool are established. By using the model, 3-D geometries of weld pools in twin-arc GMAW with a common weld pool are predicted. Corresponding welding experiments on mild steel plates are carried out and the results indicate that the predicted shape of weld bead on cross section shows good agreement with measured one.
基金Project supported by the National Natural Science Foundation of China (No. 50776097)
文摘Analytically solving a three-dimensional （3-D） bioheat transfer problem with phase change during a freezing process is extremely difficult but theoretically important. The moving heat source model and the Green function method are introduced to deal with the cryopreservation process of in vitro biomaterials. Exact solutions for the 3-D temperature transients of tissues under various boundary conditions, such as totally convective cooling, totally fixed temperature cooling and a hybrid between them on tissue surfaces, are obtained. Furthermore, the cryosurgical process in living tissues subject to freezing by a single or multiple cryoprobes is also analytically solved. A closed-form analytical solution to the bioheat phase change process is derived by considering contributions from blood perfusion heat transfer, metabolic heat generation, and heat sink of a cryoprobe. The present method is expected to have significant value for analytically solving complex bioheat transfer problems with phase change.
文摘U型中深层地埋管换热器(U-bend Deep Borehole Heat Exchanger,UDBHE)具有广阔的应用前景。文章基于无限柱热源(Infinite Cylindrical Source,ICS)和无限线热源(Infinite Line Source,ILS)模型的G函数,建立了4种UDBHE传热模型,采用ICS或ILS模型的G函数,考虑或忽略钻孔壁热流随时间变化,分别简称为ICS-q,ILS-q,ICS-c,ILS-c模型。通过与较为准确的二维数值模型及实验数据在2种边界条件下的对比,分析了这4种模型的准确性。结果表明:ILS-q模型在整体上最为准确,而ICS-q模型在分析UDBHE长期性能时最为准确;4种模型在前期均存在较大误差,但在足够长时间后,除了ILS-c和ICS-c模型在入口温度边界下仍有较大误差外,其他模型的误差均较小。研究结果可为UDBHE传热模型研究提供参考。
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52205481,51975305 and 52105457)Shandong Natural Science Foundation(Grant Nos.ZR2020ME158,ZR2023QE057,ZR2022QE028,ZR2021QE116,ZR2020KE027,and ZR2022QE159)+1 种基金Qingdao Science and Technology Planning Park Cultivation Plan(23-1-5-yqpy-17-qy)China Postdoctral Science Foundation(2021M701810).
文摘Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.
文摘In the present paper a combined procedure for the quasi-dimensional modelling of heat transfer,combustion and knock phenomena in a “downsized”Spark Ignition two-cylinder turbocharged engine is presented.The procedure is extended to also include the effects consequent the Cyclic Variability.Heat transfer is modelled by means of a Finite Elements model.Combustion simulation is based on a fractal description of the flame front area.Cyclic Variability(CV)is characterized through the introduction of a random variation on a number of parameters controlling the rate of heat release(air/fuel ratio,initial flame kernel duration and radius,laminar flame speed,turbulence intensity).The intensity of the random variation is specified in order to realize a Coefficient Of Variation(COV)of the Indicated Mean Effective Pressure(IMEP)similar to the one measured during an experimental campaign.Moreover,the relative importance of the various concurring effects is established on the overall COV.A kinetic scheme is then solved within the unburned gas zone,characterized by different thermodynamic conditions occurring cycle-by-cycle.In this way,an optimal choice of the “knock-limited”spark advance is effected and compared with experimental data.Finally,the CV effects on the occurrence of individual knocking cycles are assessed and discussed.
