In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ...In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.展开更多
Spherical harmonic analysis(SHA)and synthesis(SHS)are widely used by researchers in various fields.Both numerical integration and least-squares methods can be employed for analysis and synthesis.However,these approach...Spherical harmonic analysis(SHA)and synthesis(SHS)are widely used by researchers in various fields.Both numerical integration and least-squares methods can be employed for analysis and synthesis.However,these approaches,when calculated via summation,are computationally intensive.Although the Fast Fourier Transform(FFT)algorithm is efficient,it is traditionally limited to processing global grid points starting from zero longitude.In this paper,we derive an improved FFT algorithm for spherical harmonic analysis and synthesis.The proposed algorithm eliminates the need for grid points to start at zero longitude,thereby expanding the applicability of FFT-based methods.Numerical experiments demonstrate that the new algorithm retains the computational efficiency of conventional FFT while achieving accuracy comparable to the summation method.Consequently,it enables direct harmonic coefficient calculation from global grid data without requiring interpolation to align with zero longitude.Additionally,the algrithm can generate grid points with equi-angular spacing using the improved FFT algorithm,starting from non-zero longitudes.To address the loss of orthogonality in latitude due to discrete spherical grids,a quadrature weight factor-dependent on grid type(e.g.,regular or Gauss grid)-is incorporated,as summarized in this study.展开更多
To accelerate the large-scale integration of renewable energy and support the strategic goals of“carbon peaking and carbon neutrality,”High Voltage Direct Current(HVDC)transmission technology has made significant br...To accelerate the large-scale integration of renewable energy and support the strategic goals of“carbon peaking and carbon neutrality,”High Voltage Direct Current(HVDC)transmission technology has made significant breakthroughs.Among the various approaches,a hybrid DC transmission system that combines a line-commutated converter(LCC)and a voltage source converter(VSC)retains the inherent fault self-clearing capability of the LCC topology while mitigating the risk of commutation failure when connected to a weak grid.In this paper,based on the harmonic generation mechanisms of hybrid DC transmission systems,an improved 3-pulse harmonic source model of the LCC and a dynamic phase-sequence harmonic analysis model of the VSC are developed.The integrated harmonic model demonstrates strong adaptability in accurately calculating DC-side harmonics under the influence of power imbalances and background harmonics.Based on this model,the fundamental characteristics of DC-side harmonics in hybrid DC transmission systems are analyzed.To mitigate harmonic effects,this paper proposes an LCLC-trap2 high-order filter structure with parallel RC damping circuits and a co-optimized design of filter parameters.Finally,a±500 kV hybrid DC transmission systemismodeled using theMATLAB/Simulink platform,and the harmonic filtering performances of the conventional LC filter,the Butterworth filter,and the proposed filter are simulated and compared.The results verify that the proposed filter offers superior performance in suppressing low-order harmonics under nonideal operating conditions.展开更多
Incorporating asymmetric quadratic and cubic stiffnesses into a time-delayed Duffing oscillator provides a more accurate representation of practical systems,where the resulting nonlinearities critically influence subh...Incorporating asymmetric quadratic and cubic stiffnesses into a time-delayed Duffing oscillator provides a more accurate representation of practical systems,where the resulting nonlinearities critically influence subharmonic resonance phenomena,yet comprehensive investigations remain limited.This study employs the generalized harmonic balance(HB)method to conduct an analytical investigation of the subharmonic resonance behavior in asymmetric stiffness nonlinear systems with time delay.To further examine the switching behavior between primary and subharmonic resonances,a numerical continuation approach combining the shooting method and the parameter continuation algorithm is developed.The analytical and numerical continuation solutions are validated through direct numerical integration.Subsequently,the switching behavior and associated bifurcation points are analyzed by means of the numerical continuation results in conjunction with the Floquet theory.Finally,the effects of delay parameters on the existence range of subharmonic responses are discussed in detail,and the influence of initial conditions on system dynamics is explored with basin of attraction plots.This work establishes a comprehensive framework for the analytical and numerical study on time-delayed nonlinear systems with asymmetric stiffness,providing valuable theoretical insights into the stability management of such dynamic systems.展开更多
A vibro-impact system is a hot topic in the study on nonlinear dynamics due to its generality and importance in engineering.In general,the alternating frequency-time harmonic balance(AFT-HB)method can be used to solve...A vibro-impact system is a hot topic in the study on nonlinear dynamics due to its generality and importance in engineering.In general,the alternating frequency-time harmonic balance(AFT-HB)method can be used to solve elastic collision.However,since the system is non-smooth,the required Fourier/harmonic truncation order is high in order to achieve the theoretical convergence rate,resulting in expensive computational cost.Furthermore,for rigid body collision,the periodic response of the system cannot be solved with the AFT-HB method due to the discontinuous velocity of the system.In order to accelerate the convergence and solve highly non-smooth systems,an enriched harmonic balance(HB)method is proposed,which is derived from the AFT-HB method in the framework of event-driven Gauss quadrature.The basic idea is to augment the Fourier bases by introducing a non-smooth Bernoulli base such that the non-smooth Bernoulli base compensates for the non-smooth part of the solution and the smooth part of the solution is approximated by the Fourier bases,thus achieving accelerated convergence.Based on the enriched HB method,gear pair systems with gear backlash and oscillator systems with rigid impact are solved,and the dynamic response characteristics are analyzed in this work.Then,based on the Floquet theory,the event-driven monodromy matrix method for non-smooth systems is used to analyze the stability and bifurcation of the periodic solutions.The numerical example shows that the results obtained from the enriched HB method are consistent with those from the Runge-Kutta method,which proves that the presented method is an effective method for analyzing the dynamic response characteristic of the vibro-impact system.展开更多
This paper presents a programmable frequency scan algorithm based on harmonic balance.The core idea involves treating systems under perturbation as nonlinear time-periodic(NTP)systems.Steady-state harmonics are first ...This paper presents a programmable frequency scan algorithm based on harmonic balance.The core idea involves treating systems under perturbation as nonlinear time-periodic(NTP)systems.Steady-state harmonics are first solved via Newton-Raphson iteration through a set of nonlinear equations,and then input-output variables are selected to estimate the linear transfer function of the original NTP system without perturbations.The applications and insights of the proposed algorithm are discussed,particularly in guiding existing frequency scan algorithms,which are restricted by time-domain signal generation or measurement.This improvement is achieved through linear stability analysis of NTP systems with perturbations.展开更多
Border-associated macrophages are located at the interface between the brain and the periphery, including the perivascular spaces, choroid plexus, and meninges. Until recently, the functions of border-associated macro...Border-associated macrophages are located at the interface between the brain and the periphery, including the perivascular spaces, choroid plexus, and meninges. Until recently, the functions of border-associated macrophages have been poorly understood and largely overlooked. However, a recent study reported that border-associated macrophages participate in stroke-induced inflammation, although many details and the underlying mechanisms remain unclear. In this study, we performed a comprehensive single-cell analysis of mouse border-associated macrophages using sequencing data obtained from the Gene Expression Omnibus(GEO) database(GSE174574 and GSE225948). Differentially expressed genes were identified, and enrichment analysis was performed to identify the transcription profile of border-associated macrophages. CellChat analysis was conducted to determine the cell communication network of border-associated macrophages. Transcription factors were predicted using the ‘pySCENIC' tool. We found that, in response to hypoxia, borderassociated macrophages underwent dynamic transcriptional changes and participated in the regulation of inflammatory-related pathways. Notably, the tumor necrosis factor pathway was activated by border-associated macrophages following ischemic stroke. The pySCENIC analysis indicated that the activity of signal transducer and activator of transcription 3(Stat3) was obviously upregulated in stroke, suggesting that Stat3 inhibition may be a promising strategy for treating border-associated macrophages-induced neuroinflammation. Finally, we constructed an animal model to investigate the effects of border-associated macrophages depletion following a stroke. Treatment with liposomes containing clodronate significantly reduced infarct volume in the animals and improved neurological scores compared with untreated animals. Taken together, our results demonstrate comprehensive changes in border-associated macrophages following a stroke, providing a theoretical basis for targeting border-associated macrophages-induced neuroinflammation in stroke treatment.展开更多
Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'...Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.展开更多
The space gravitational wave detection aims to detect gravitational waves in the mHz band in order to study supermassive black hole mergers,galaxy evolution and the structure of the early universe.One of its core payl...The space gravitational wave detection aims to detect gravitational waves in the mHz band in order to study supermassive black hole mergers,galaxy evolution and the structure of the early universe.One of its core payloads is a transponder-type interstellar laser interferometer,designed to measure relative displacement changes at the pico-meter level.Among its components,phasemeter is tasked with extracting the phase and frequency of the interference signal.Currently,phase-locked loop(PLL)phasemeters are commonly employed.However,the second harmonic signal generated by the mixer can restrict both the dynamic range and phase measurement accuracy of the phasemeter.This paper analyzes the interstellar laser interferometer and the impact of the second harmonic signal on the phasemeter's performance.To address these challenges,a phasemeter incorporating a second harmonic signal filter is proposed.This new design mitigates second harmonic disturbances within the phasemeter's bandwidth by dynamically adjusting the filter's cutoff frequency to track the input signal frequency,thereby suppressing the second harmonic signal in real time.Theoretical and simulation analyses demonstrate that the proposed phasemeter with a second harmonic filter significantly enhances the dynamic range.Finally,experimental results verify that the phasemeter can achieve the tracking of sudden frequency changes up to4.8 MHz.展开更多
With their intricate vectorial structures in space,optical skyrmions have significantly expanded the landscape of topological optics and light-matter interactions.We theoretically investigate high harmonic generation ...With their intricate vectorial structures in space,optical skyrmions have significantly expanded the landscape of topological optics and light-matter interactions.We theoretically investigate high harmonic generation in crystals driven by optical skyrmions.We find that although the skyrmion number is not conserved,the resulting high-order harmonics can exhibit a distinctive multi-vortex structure,whose features are shaped by both the topology of the optical skyrmions and the rotational symmetry of the crystal.The position of the vortex centers can be effectively tuned by employing different types of optical skyrmions.To elucidate the underlying physics,we develop a multi-absorption channel model based on the conservation laws of spin and orbital angular momentum.Our work explores the role of optical topology in extreme nonlinear light-matter interactions,offering new opportunities for the formation and manipulation of optical vortices and novel structured light fields in the visible and ultraviolet regimes.展开更多
The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recogni...The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.展开更多
Objective:To evaluate the global,regional,and national burden and determinants of Acute Respiratory Infections(ARIs)among children and adolescents from 1990 to 2021.Methods:We analysed ARI mortality and disability-adj...Objective:To evaluate the global,regional,and national burden and determinants of Acute Respiratory Infections(ARIs)among children and adolescents from 1990 to 2021.Methods:We analysed ARI mortality and disability-adjusted life years(DALYs),stratified by age,sex,and economic development level based on data retrieved from the Global Burden of Disease study 2021.Decomposition and frontier analyses were employed to identify key drivers of burden variation and visualize potential reductions based on development levels.Results:Between 1990 and 2021,the global burden of ARIs showed a significant decline in both achievable age-standardized DALYs rate and age-standardized mortality rates(EAPC=-3.87 and-3.81,respectively).Different age groups and sex witnessed different levels of ARI burden,males experienced heavier burden than females and the 0-4 years-old group experienced heavier burden than other study age groups.Most of the 204 countries and territories experienced a downward trend of ARI burden,with slight increases observed only in Lesotho and Dominica.A negative correlation was found between the Socio-demographic Index and ARI burden.Decomposition analysis indicated that the significant decreases in deaths and DALYs were primarily driven by epidemiological changes.Conclusions:The global burden of ARIs among children and adolescents has declined over the past three decades,but substantial regional disparities persist.Targeted public health strategies are needed to address the continued ARI burden in high-risk regions and vulnerable age groups.展开更多
The detection and characterization of non-metallic inclusions are essential for clean steel production.Recently,imaging analysis combined with high-dimensional data processing of metallic materials using artificial in...The detection and characterization of non-metallic inclusions are essential for clean steel production.Recently,imaging analysis combined with high-dimensional data processing of metallic materials using artificial intelligence(AI)-based machine learning(ML)has developed rapidly.This technique has achieved impressive results in the field of inclusion classification in process metallurgy.The present study surveys the ML modeling of inclusion prediction in advanced steels,including the detection,classification,and feature prediction of inclusions in different steel grades.Studies on clean steel with different features based on data and image analysis via ML are summarized.Regarding the data analysis,the inclusion prediction methodology based on ML establishes a connection between the experimental parameters and inclusion characteristics and analyzes the importance of the experimental parameters.Regarding the image analysis,the focus is placed on the classification of different types of inclusions via deep learning,in comparison with data analysis.Finally,further development of inclusion analyses using ML-based methods is recommended.This work paves the way for the application of AIbased methodologies for ultraclean-steel studies from a sustainable metallurgy perspective.展开更多
Red-fleshed fruits are valued for their vibrant color and high anthocyanin content.Pre-harvest fruit bagging enhances fruit peel pigmentation,but its effect on flesh coloration remains poorly characterized.This study ...Red-fleshed fruits are valued for their vibrant color and high anthocyanin content.Pre-harvest fruit bagging enhances fruit peel pigmentation,but its effect on flesh coloration remains poorly characterized.This study revealed that removing bags from‘Gengcunyangtao’red-fleshed peach fruits triggers the rapid and uniform accumulation of anthocyanins in the flesh,resulting in anthocyanin levels that exceed those in unbagged fruits.The exposure to light after bag removal triggered significant increases in anthocyanin levels within 24 h.This was accompanied by the rapid upregulation of light-responsive and flavonoid biosynthetic gene expression levels within 6 h.A metabolomic analysis indicated that anthocyanin precursors,especially p-coumaric acid,accumulated before bag removal,thereby increasing substrate availability for rapid anthocyanin synthesis.On the basis of a weighted gene co-expression network analysis,MYB transcription factors,anthocyanin transporters,glutathione S-transferase,and multidrug and toxic compound extrusion(MATE)were identified as key regulators that coordinate precursor storage along with light-induced transcriptional activation.Notably,PpMYB4 binds to the promoter of PpGSTF14 and activates its expression,thereby promoting anthocyanin accumulation.The study findings elucidated the temporal coordination of metabolic priming and light-responsive transcriptional regulation driving rapid anthocyanin biosynthesis,with possible implications for improving peach fruit flesh coloration.展开更多
High-precision optical frequency measurement serves as a cornerstone of modern science and technology,enabling advancements in fields ranging from fundamental physics to quantum information technologies.Obtaining prec...High-precision optical frequency measurement serves as a cornerstone of modern science and technology,enabling advancements in fields ranging from fundamental physics to quantum information technologies.Obtaining precise photon frequencies,especially in the ultraviolet or even extreme ultraviolet regimes,is a key goal in both light–matter interaction experiments and engineering applications.High-order harmonic generation(HHG)is an ideal light source for producing such photons.In this work,we propose an optical temporal interference model(OTIM)that establishes an analogy with multi-slit Fraunhofer diffraction(MSFD)to manipulate fine-frequency photon generation by exploiting the temporal coherence of HHG processes.Our model provides a unified physical framework for three distinct non-integer HHG generation schemes:single-pulse,shaped-pulse,and laser pulse train approaches,which correspond to single-MSFD-like,double-MSFD-like,and multi-MSFD-like processes,respectively.Arbitrary non-integer HHG photons can be obtained using our scheme.Our approach provides a new perspective for accurately measuring and controlling photon frequencies in fields such as frequency comb technology,interferometry,and atomic clocks.展开更多
Background:Receptor-interacting protein kinases(RIPKs)regulate cell death,inflammation,and immune responses,yet their roles in cancer are not fully understood.This study investigates the expression,genomic alterations...Background:Receptor-interacting protein kinases(RIPKs)regulate cell death,inflammation,and immune responses,yet their roles in cancer are not fully understood.This study investigates the expression,genomic alterations,and functional implications of RIPK family members across various cancers.Methods:We collected multi-omics data from The Cancer Genome Atlas and other public databases,including gene expression,copy number variation(CNV),mutation,methylation,tumor mutation burden(TMB),and microsatellite instability(MSI).Differential expression and survival analyses were performed using DESeq2 and Cox proportional hazards models.CNV and mutation data were analyzed with GISTIC2 and Mutect2,and methylation data with the ChAMP package.Correlations with TMB and MSI were assessed using Pearson coefficients,and gene set enrichment analysis was conducted with the MSigDB Hallmark gene sets.Results:RIPK family members show significant differential expression in various cancers,with RIPK1 and RIPK4 frequently altered.Survival analysis reveals heterogeneous impacts on overall survival.CNV and mutation analyses identify high alteration frequencies for RIPK2 and RIPK7,affecting gene expression.RIPK1 and RIPK7 are hypermethylated in several cancers,inversely correlating with RIPK3 expression.RIPK1,RIPK2,RIPK5,RIPK6,and RIPK7 correlate positively with TMB,while RIPK3 shows negative correlations in some cancers.MSI analysis indicates associations with DNA mismatch repair.G ene set enrichment analysis highlights immune-related pathway enrichment for RIPK1,RIPK2,RIPK3,and RIPK6,and cell proliferation and DNA repair pathways for RIPK4 and RIPK5.RIPK family members showed heterogeneous alterations across cancers:for example,RIPK7 was mutated in up to~15%of u terine c orpus e ndometrial c arcinoma and l ung s quamous c ell c arcinoma cases,and RIPK1 and RIPK7 exhibited frequent promoter hypermethylation in multiple tumor types.Several genes displayed context-dependent associations with overall survival and with TMB/MSI.Conclusion:This pan-cancer analysis of the RIPK family reveals their diverse roles and potential as biomarkers and therapeutic targets.The findings emphasize the importance of RIPK genes in tumorigenesis and suggest context-dependent functions across cancer types.Further studies are needed to explore their mechanisms in cancer development and clinical applications.展开更多
[Objective]This study aims to investigate the multi-body hydrodynamic interaction mechanisms during offshore lifting operations of aquaculture net cages in wind-fishery integration systems.By integrating numerical sim...[Objective]This study aims to investigate the multi-body hydrodynamic interaction mechanisms during offshore lifting operations of aquaculture net cages in wind-fishery integration systems.By integrating numerical simulations and dynamic analysis methods,this study systematically investigates the coupled dynamic response characteristics during the cage-carrier vessel separation process to reveal its dynamic evolution patterns and key influence mechanisms.[Method]Based on potential flow theory,a fully coupled dynamic analysis model of crane vessel-net cage-semi-submersible barge was established for a marine ranch project in Guangdong.The complete lifting process was dynamically simulated using SESAM software.Five typical operating sea states were configured to investigate the influence of wave parameters on the system's motion response under combined wave-current-wind actions.[Result]The results demonstrate that wave period dominates the system stability.Under short-period conditions,the system maintains stable motion with relatively small horizontal relative displacements,while long-period conditions excite low-frequency resonance,leading to significant slow-drift motions.Vertical response analysis reveals that long-period waves cause severe relative displacement fluctuations between the cage and semi-submersible vessel,with actual displacement amplitudes doubling the preset safety target of 2.045 m.Quantitative analysis further indicates that when significant wave height increases from 1.0 m to 1.5 m,the actual displacement amplitude increases by approximately 20%relative to the target displacement of 2.045 m,demonstrating that its influence is significantly weaker than the displacement variations induced by wave period changes.The complete dynamic simulation successfully captures the continuous dynamic response characteristics during the lifting process.[Conclusion]This research clarifies the influence mechanisms of wave parameters on the cage lifting process,identifying wave period as the crucial factor for operational safety.An operation window assessment method incorporating multi-body coupling effects is established,proposing a safety criterion with peak period not exceeding six seconds as the core requirement.The findings provide theoretical foundation for safe installation of marine ranch net cages and offer valuable references for similar offshore lifting operations.展开更多
The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.A...The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.展开更多
Fault features in mechanical systems often manifest as transient impulses,which can be effectively analyzed using time-frequency analysis(TFA)methods.Recently,a new TFA technique known as the time-reassigned multi-syn...Fault features in mechanical systems often manifest as transient impulses,which can be effectively analyzed using time-frequency analysis(TFA)methods.Recently,a new TFA technique known as the time-reassigned multi-synchrosqueezing transform(TMssT)was proposed to capture these transient impulses for fault diagnosis.However,the TMSST,which is based on the short-time Fourier transform(STFT),suffers from unclear high-frequency re-presentations owing to the fixed sliding window used in the STFT.To address this limitation,the current study combined TMSST with the S-transform and a local maximum method to enhance the time-frequency representation for improved signal analysis.Furthermore,an extractive reconstruction algorithm that binds the maximum value of the spectral envelope is proposed for spectral decomposition.To validate the proposed technique,a simulated noise-added signal and four experimental bearing defect datasets were used.The results demonstrate that the proposed technique can effectively and accurately extract fault features from bearing signals regardless of whether the bearings operate under constant or varying speed conditions.This study offers a novel and efficient approach for fault diagnosis in mechanical systems with complex dynamic behaviors.展开更多
With the rapid proliferation of electric vehicles,their charging loads pose new challenges to power grid stability and operational efficiency.To address this,this study employs a Monte Carlo simulation model to analyz...With the rapid proliferation of electric vehicles,their charging loads pose new challenges to power grid stability and operational efficiency.To address this,this study employs a Monte Carlo simulation model to analyze the charging load characteristics of six battery electric vehicle categories in Hebei Province,leveraging multi-source probabilistic distribution data under typical operational scenarios.The findings reveal that electric vehicle charging loads are primarily concentrated during midday and nighttime periods,with significant load fluctuations exerting substantial pressure on the grid.In response,this paper proposes strategic interventions including optimized charging infrastructure planning,time-of-use electricity pricing mechanisms,and smart charging technologies to balance grid loads.The results provide a theoretical foundation for electric vehicle load forecasting,smart grid dispatching,and vehicle-grid integration,thereby enhancing grid operational efficiency and sustainability.展开更多
文摘In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.
基金supported by The National Natural Science Foundation of China(42374004).
文摘Spherical harmonic analysis(SHA)and synthesis(SHS)are widely used by researchers in various fields.Both numerical integration and least-squares methods can be employed for analysis and synthesis.However,these approaches,when calculated via summation,are computationally intensive.Although the Fast Fourier Transform(FFT)algorithm is efficient,it is traditionally limited to processing global grid points starting from zero longitude.In this paper,we derive an improved FFT algorithm for spherical harmonic analysis and synthesis.The proposed algorithm eliminates the need for grid points to start at zero longitude,thereby expanding the applicability of FFT-based methods.Numerical experiments demonstrate that the new algorithm retains the computational efficiency of conventional FFT while achieving accuracy comparable to the summation method.Consequently,it enables direct harmonic coefficient calculation from global grid data without requiring interpolation to align with zero longitude.Additionally,the algrithm can generate grid points with equi-angular spacing using the improved FFT algorithm,starting from non-zero longitudes.To address the loss of orthogonality in latitude due to discrete spherical grids,a quadrature weight factor-dependent on grid type(e.g.,regular or Gauss grid)-is incorporated,as summarized in this study.
基金funded by the Natural Science Foundation of Chongqing(CSTB2023NSCQMSX0279)the Science and Technology Research Program of Chongqing Municipal Education Commission(KJQN202201119).
文摘To accelerate the large-scale integration of renewable energy and support the strategic goals of“carbon peaking and carbon neutrality,”High Voltage Direct Current(HVDC)transmission technology has made significant breakthroughs.Among the various approaches,a hybrid DC transmission system that combines a line-commutated converter(LCC)and a voltage source converter(VSC)retains the inherent fault self-clearing capability of the LCC topology while mitigating the risk of commutation failure when connected to a weak grid.In this paper,based on the harmonic generation mechanisms of hybrid DC transmission systems,an improved 3-pulse harmonic source model of the LCC and a dynamic phase-sequence harmonic analysis model of the VSC are developed.The integrated harmonic model demonstrates strong adaptability in accurately calculating DC-side harmonics under the influence of power imbalances and background harmonics.Based on this model,the fundamental characteristics of DC-side harmonics in hybrid DC transmission systems are analyzed.To mitigate harmonic effects,this paper proposes an LCLC-trap2 high-order filter structure with parallel RC damping circuits and a co-optimized design of filter parameters.Finally,a±500 kV hybrid DC transmission systemismodeled using theMATLAB/Simulink platform,and the harmonic filtering performances of the conventional LC filter,the Butterworth filter,and the proposed filter are simulated and compared.The results verify that the proposed filter offers superior performance in suppressing low-order harmonics under nonideal operating conditions.
基金Project supported by the National Natural Science Foundation of China(Nos.U24B2062,520754285247051087)+1 种基金the Two-chain Fusion High-end Machine Tool Project of Shaanxi Province of China(No.2021LLRh-01-02)the Youth Fund of the National Natural Science Foundation of China(No.52205281)。
文摘Incorporating asymmetric quadratic and cubic stiffnesses into a time-delayed Duffing oscillator provides a more accurate representation of practical systems,where the resulting nonlinearities critically influence subharmonic resonance phenomena,yet comprehensive investigations remain limited.This study employs the generalized harmonic balance(HB)method to conduct an analytical investigation of the subharmonic resonance behavior in asymmetric stiffness nonlinear systems with time delay.To further examine the switching behavior between primary and subharmonic resonances,a numerical continuation approach combining the shooting method and the parameter continuation algorithm is developed.The analytical and numerical continuation solutions are validated through direct numerical integration.Subsequently,the switching behavior and associated bifurcation points are analyzed by means of the numerical continuation results in conjunction with the Floquet theory.Finally,the effects of delay parameters on the existence range of subharmonic responses are discussed in detail,and the influence of initial conditions on system dynamics is explored with basin of attraction plots.This work establishes a comprehensive framework for the analytical and numerical study on time-delayed nonlinear systems with asymmetric stiffness,providing valuable theoretical insights into the stability management of such dynamic systems.
基金Project supported by the National Natural Science Foundation of China(No.12372028)the Guangdong Basic and Applied Basic Research Foundation(No.2022A1515011809)。
文摘A vibro-impact system is a hot topic in the study on nonlinear dynamics due to its generality and importance in engineering.In general,the alternating frequency-time harmonic balance(AFT-HB)method can be used to solve elastic collision.However,since the system is non-smooth,the required Fourier/harmonic truncation order is high in order to achieve the theoretical convergence rate,resulting in expensive computational cost.Furthermore,for rigid body collision,the periodic response of the system cannot be solved with the AFT-HB method due to the discontinuous velocity of the system.In order to accelerate the convergence and solve highly non-smooth systems,an enriched harmonic balance(HB)method is proposed,which is derived from the AFT-HB method in the framework of event-driven Gauss quadrature.The basic idea is to augment the Fourier bases by introducing a non-smooth Bernoulli base such that the non-smooth Bernoulli base compensates for the non-smooth part of the solution and the smooth part of the solution is approximated by the Fourier bases,thus achieving accelerated convergence.Based on the enriched HB method,gear pair systems with gear backlash and oscillator systems with rigid impact are solved,and the dynamic response characteristics are analyzed in this work.Then,based on the Floquet theory,the event-driven monodromy matrix method for non-smooth systems is used to analyze the stability and bifurcation of the periodic solutions.The numerical example shows that the results obtained from the enriched HB method are consistent with those from the Runge-Kutta method,which proves that the presented method is an effective method for analyzing the dynamic response characteristic of the vibro-impact system.
基金supported by China Southern Power Grid Corporation(036000KC23090005(GDKJXM20231027)).
文摘This paper presents a programmable frequency scan algorithm based on harmonic balance.The core idea involves treating systems under perturbation as nonlinear time-periodic(NTP)systems.Steady-state harmonics are first solved via Newton-Raphson iteration through a set of nonlinear equations,and then input-output variables are selected to estimate the linear transfer function of the original NTP system without perturbations.The applications and insights of the proposed algorithm are discussed,particularly in guiding existing frequency scan algorithms,which are restricted by time-domain signal generation or measurement.This improvement is achieved through linear stability analysis of NTP systems with perturbations.
基金supported by Qingdao Key Medical and Health Discipline ProjectThe Intramural Research Program of the Affiliated Hospital of Qingdao University,No. 4910Qingdao West Coast New Area Science and Technology Project,No. 2020-55 (all to SW)。
文摘Border-associated macrophages are located at the interface between the brain and the periphery, including the perivascular spaces, choroid plexus, and meninges. Until recently, the functions of border-associated macrophages have been poorly understood and largely overlooked. However, a recent study reported that border-associated macrophages participate in stroke-induced inflammation, although many details and the underlying mechanisms remain unclear. In this study, we performed a comprehensive single-cell analysis of mouse border-associated macrophages using sequencing data obtained from the Gene Expression Omnibus(GEO) database(GSE174574 and GSE225948). Differentially expressed genes were identified, and enrichment analysis was performed to identify the transcription profile of border-associated macrophages. CellChat analysis was conducted to determine the cell communication network of border-associated macrophages. Transcription factors were predicted using the ‘pySCENIC' tool. We found that, in response to hypoxia, borderassociated macrophages underwent dynamic transcriptional changes and participated in the regulation of inflammatory-related pathways. Notably, the tumor necrosis factor pathway was activated by border-associated macrophages following ischemic stroke. The pySCENIC analysis indicated that the activity of signal transducer and activator of transcription 3(Stat3) was obviously upregulated in stroke, suggesting that Stat3 inhibition may be a promising strategy for treating border-associated macrophages-induced neuroinflammation. Finally, we constructed an animal model to investigate the effects of border-associated macrophages depletion following a stroke. Treatment with liposomes containing clodronate significantly reduced infarct volume in the animals and improved neurological scores compared with untreated animals. Taken together, our results demonstrate comprehensive changes in border-associated macrophages following a stroke, providing a theoretical basis for targeting border-associated macrophages-induced neuroinflammation in stroke treatment.
文摘Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.
基金the National Key Research&Development Program of China(Grant No.2022YFC2203901)the State Key Laboratory of Spatial Datum(Grant No.SKLSD2025-KF-03)+1 种基金Fundamental Research Funds for the Central UniversitiesSun Yat-sen University for the support。
文摘The space gravitational wave detection aims to detect gravitational waves in the mHz band in order to study supermassive black hole mergers,galaxy evolution and the structure of the early universe.One of its core payloads is a transponder-type interstellar laser interferometer,designed to measure relative displacement changes at the pico-meter level.Among its components,phasemeter is tasked with extracting the phase and frequency of the interference signal.Currently,phase-locked loop(PLL)phasemeters are commonly employed.However,the second harmonic signal generated by the mixer can restrict both the dynamic range and phase measurement accuracy of the phasemeter.This paper analyzes the interstellar laser interferometer and the impact of the second harmonic signal on the phasemeter's performance.To address these challenges,a phasemeter incorporating a second harmonic signal filter is proposed.This new design mitigates second harmonic disturbances within the phasemeter's bandwidth by dynamically adjusting the filter's cutoff frequency to track the input signal frequency,thereby suppressing the second harmonic signal in real time.Theoretical and simulation analyses demonstrate that the proposed phasemeter with a second harmonic filter significantly enhances the dynamic range.Finally,experimental results verify that the phasemeter can achieve the tracking of sudden frequency changes up to4.8 MHz.
基金supported by the National Natural Science Foundation of China (Grant Nos. 12234002, 92250303, 12474486, 12504301, and 12504396)the National Key Research and Development Program of China (Grant No. 2024YFA1612101)。
文摘With their intricate vectorial structures in space,optical skyrmions have significantly expanded the landscape of topological optics and light-matter interactions.We theoretically investigate high harmonic generation in crystals driven by optical skyrmions.We find that although the skyrmion number is not conserved,the resulting high-order harmonics can exhibit a distinctive multi-vortex structure,whose features are shaped by both the topology of the optical skyrmions and the rotational symmetry of the crystal.The position of the vortex centers can be effectively tuned by employing different types of optical skyrmions.To elucidate the underlying physics,we develop a multi-absorption channel model based on the conservation laws of spin and orbital angular momentum.Our work explores the role of optical topology in extreme nonlinear light-matter interactions,offering new opportunities for the formation and manipulation of optical vortices and novel structured light fields in the visible and ultraviolet regimes.
文摘The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.
文摘Objective:To evaluate the global,regional,and national burden and determinants of Acute Respiratory Infections(ARIs)among children and adolescents from 1990 to 2021.Methods:We analysed ARI mortality and disability-adjusted life years(DALYs),stratified by age,sex,and economic development level based on data retrieved from the Global Burden of Disease study 2021.Decomposition and frontier analyses were employed to identify key drivers of burden variation and visualize potential reductions based on development levels.Results:Between 1990 and 2021,the global burden of ARIs showed a significant decline in both achievable age-standardized DALYs rate and age-standardized mortality rates(EAPC=-3.87 and-3.81,respectively).Different age groups and sex witnessed different levels of ARI burden,males experienced heavier burden than females and the 0-4 years-old group experienced heavier burden than other study age groups.Most of the 204 countries and territories experienced a downward trend of ARI burden,with slight increases observed only in Lesotho and Dominica.A negative correlation was found between the Socio-demographic Index and ARI burden.Decomposition analysis indicated that the significant decreases in deaths and DALYs were primarily driven by epidemiological changes.Conclusions:The global burden of ARIs among children and adolescents has declined over the past three decades,but substantial regional disparities persist.Targeted public health strategies are needed to address the continued ARI burden in high-risk regions and vulnerable age groups.
基金support from the National Key Research and Development Program of China(No.2024YFB3713705)is acknowledgedWangzhong Mu would like to acknowledge the Strategic Mobility,Sweden(SSF,No.SM22-0039)+1 种基金the Swedish Foundation for International Cooperation in Research and Higher Education(STINT,No.IB2022-9228)the Jernkontoret(Sweden)for supporting this clean steel research.Gonghao Lian would like to acknowledge China Scholarship Council(CSC,No.202306080032).
文摘The detection and characterization of non-metallic inclusions are essential for clean steel production.Recently,imaging analysis combined with high-dimensional data processing of metallic materials using artificial intelligence(AI)-based machine learning(ML)has developed rapidly.This technique has achieved impressive results in the field of inclusion classification in process metallurgy.The present study surveys the ML modeling of inclusion prediction in advanced steels,including the detection,classification,and feature prediction of inclusions in different steel grades.Studies on clean steel with different features based on data and image analysis via ML are summarized.Regarding the data analysis,the inclusion prediction methodology based on ML establishes a connection between the experimental parameters and inclusion characteristics and analyzes the importance of the experimental parameters.Regarding the image analysis,the focus is placed on the classification of different types of inclusions via deep learning,in comparison with data analysis.Finally,further development of inclusion analyses using ML-based methods is recommended.This work paves the way for the application of AIbased methodologies for ultraclean-steel studies from a sustainable metallurgy perspective.
基金supported by the Key Scientific and Technological Grant of Zhejiang for Breeding New Agricultural Varieties(Grant No.2021C12066-4)Huzhou Agricultural Science and Technology Innovation Team Project(Grant No.2022HN01).
文摘Red-fleshed fruits are valued for their vibrant color and high anthocyanin content.Pre-harvest fruit bagging enhances fruit peel pigmentation,but its effect on flesh coloration remains poorly characterized.This study revealed that removing bags from‘Gengcunyangtao’red-fleshed peach fruits triggers the rapid and uniform accumulation of anthocyanins in the flesh,resulting in anthocyanin levels that exceed those in unbagged fruits.The exposure to light after bag removal triggered significant increases in anthocyanin levels within 24 h.This was accompanied by the rapid upregulation of light-responsive and flavonoid biosynthetic gene expression levels within 6 h.A metabolomic analysis indicated that anthocyanin precursors,especially p-coumaric acid,accumulated before bag removal,thereby increasing substrate availability for rapid anthocyanin synthesis.On the basis of a weighted gene co-expression network analysis,MYB transcription factors,anthocyanin transporters,glutathione S-transferase,and multidrug and toxic compound extrusion(MATE)were identified as key regulators that coordinate precursor storage along with light-induced transcriptional activation.Notably,PpMYB4 binds to the promoter of PpGSTF14 and activates its expression,thereby promoting anthocyanin accumulation.The study findings elucidated the temporal coordination of metabolic priming and light-responsive transcriptional regulation driving rapid anthocyanin biosynthesis,with possible implications for improving peach fruit flesh coloration.
基金supported by the National Natural Science Foundation of China(Grant No.12304379)the Natural Science Foundation of Liaoning Province(Grant No.2024BS-269)the Guangdong Basic and Applied Basic Research Foundation(Grant No.025A1515011117)。
文摘High-precision optical frequency measurement serves as a cornerstone of modern science and technology,enabling advancements in fields ranging from fundamental physics to quantum information technologies.Obtaining precise photon frequencies,especially in the ultraviolet or even extreme ultraviolet regimes,is a key goal in both light–matter interaction experiments and engineering applications.High-order harmonic generation(HHG)is an ideal light source for producing such photons.In this work,we propose an optical temporal interference model(OTIM)that establishes an analogy with multi-slit Fraunhofer diffraction(MSFD)to manipulate fine-frequency photon generation by exploiting the temporal coherence of HHG processes.Our model provides a unified physical framework for three distinct non-integer HHG generation schemes:single-pulse,shaped-pulse,and laser pulse train approaches,which correspond to single-MSFD-like,double-MSFD-like,and multi-MSFD-like processes,respectively.Arbitrary non-integer HHG photons can be obtained using our scheme.Our approach provides a new perspective for accurately measuring and controlling photon frequencies in fields such as frequency comb technology,interferometry,and atomic clocks.
基金supported by grants from the Tianjin Health Technology Project(Grant no.2022QN106).
文摘Background:Receptor-interacting protein kinases(RIPKs)regulate cell death,inflammation,and immune responses,yet their roles in cancer are not fully understood.This study investigates the expression,genomic alterations,and functional implications of RIPK family members across various cancers.Methods:We collected multi-omics data from The Cancer Genome Atlas and other public databases,including gene expression,copy number variation(CNV),mutation,methylation,tumor mutation burden(TMB),and microsatellite instability(MSI).Differential expression and survival analyses were performed using DESeq2 and Cox proportional hazards models.CNV and mutation data were analyzed with GISTIC2 and Mutect2,and methylation data with the ChAMP package.Correlations with TMB and MSI were assessed using Pearson coefficients,and gene set enrichment analysis was conducted with the MSigDB Hallmark gene sets.Results:RIPK family members show significant differential expression in various cancers,with RIPK1 and RIPK4 frequently altered.Survival analysis reveals heterogeneous impacts on overall survival.CNV and mutation analyses identify high alteration frequencies for RIPK2 and RIPK7,affecting gene expression.RIPK1 and RIPK7 are hypermethylated in several cancers,inversely correlating with RIPK3 expression.RIPK1,RIPK2,RIPK5,RIPK6,and RIPK7 correlate positively with TMB,while RIPK3 shows negative correlations in some cancers.MSI analysis indicates associations with DNA mismatch repair.G ene set enrichment analysis highlights immune-related pathway enrichment for RIPK1,RIPK2,RIPK3,and RIPK6,and cell proliferation and DNA repair pathways for RIPK4 and RIPK5.RIPK family members showed heterogeneous alterations across cancers:for example,RIPK7 was mutated in up to~15%of u terine c orpus e ndometrial c arcinoma and l ung s quamous c ell c arcinoma cases,and RIPK1 and RIPK7 exhibited frequent promoter hypermethylation in multiple tumor types.Several genes displayed context-dependent associations with overall survival and with TMB/MSI.Conclusion:This pan-cancer analysis of the RIPK family reveals their diverse roles and potential as biomarkers and therapeutic targets.The findings emphasize the importance of RIPK genes in tumorigenesis and suggest context-dependent functions across cancer types.Further studies are needed to explore their mechanisms in cancer development and clinical applications.
文摘[Objective]This study aims to investigate the multi-body hydrodynamic interaction mechanisms during offshore lifting operations of aquaculture net cages in wind-fishery integration systems.By integrating numerical simulations and dynamic analysis methods,this study systematically investigates the coupled dynamic response characteristics during the cage-carrier vessel separation process to reveal its dynamic evolution patterns and key influence mechanisms.[Method]Based on potential flow theory,a fully coupled dynamic analysis model of crane vessel-net cage-semi-submersible barge was established for a marine ranch project in Guangdong.The complete lifting process was dynamically simulated using SESAM software.Five typical operating sea states were configured to investigate the influence of wave parameters on the system's motion response under combined wave-current-wind actions.[Result]The results demonstrate that wave period dominates the system stability.Under short-period conditions,the system maintains stable motion with relatively small horizontal relative displacements,while long-period conditions excite low-frequency resonance,leading to significant slow-drift motions.Vertical response analysis reveals that long-period waves cause severe relative displacement fluctuations between the cage and semi-submersible vessel,with actual displacement amplitudes doubling the preset safety target of 2.045 m.Quantitative analysis further indicates that when significant wave height increases from 1.0 m to 1.5 m,the actual displacement amplitude increases by approximately 20%relative to the target displacement of 2.045 m,demonstrating that its influence is significantly weaker than the displacement variations induced by wave period changes.The complete dynamic simulation successfully captures the continuous dynamic response characteristics during the lifting process.[Conclusion]This research clarifies the influence mechanisms of wave parameters on the cage lifting process,identifying wave period as the crucial factor for operational safety.An operation window assessment method incorporating multi-body coupling effects is established,proposing a safety criterion with peak period not exceeding six seconds as the core requirement.The findings provide theoretical foundation for safe installation of marine ranch net cages and offer valuable references for similar offshore lifting operations.
基金financially supported by the National Natural Science Foundation of China(Nos.52034002 and U2202254)the Fundamental Research Funds for the Central Universities,China(No.FRF-TT-19-001)。
文摘The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.
基金Supported by National Natural Science Foundation of China(Grant No.62271230)Shandong Provincial Central Guidance on Local Science and Technology Development Fund(Grant No.YDZX2022178).
文摘Fault features in mechanical systems often manifest as transient impulses,which can be effectively analyzed using time-frequency analysis(TFA)methods.Recently,a new TFA technique known as the time-reassigned multi-synchrosqueezing transform(TMssT)was proposed to capture these transient impulses for fault diagnosis.However,the TMSST,which is based on the short-time Fourier transform(STFT),suffers from unclear high-frequency re-presentations owing to the fixed sliding window used in the STFT.To address this limitation,the current study combined TMSST with the S-transform and a local maximum method to enhance the time-frequency representation for improved signal analysis.Furthermore,an extractive reconstruction algorithm that binds the maximum value of the spectral envelope is proposed for spectral decomposition.To validate the proposed technique,a simulated noise-added signal and four experimental bearing defect datasets were used.The results demonstrate that the proposed technique can effectively and accurately extract fault features from bearing signals regardless of whether the bearings operate under constant or varying speed conditions.This study offers a novel and efficient approach for fault diagnosis in mechanical systems with complex dynamic behaviors.
基金funded by Humanities and Social Sciences of Ministry of Education Planning Fund of China,grant number 21YJA790009National Natural Science Foundation of China,grant number 72140001.
文摘With the rapid proliferation of electric vehicles,their charging loads pose new challenges to power grid stability and operational efficiency.To address this,this study employs a Monte Carlo simulation model to analyze the charging load characteristics of six battery electric vehicle categories in Hebei Province,leveraging multi-source probabilistic distribution data under typical operational scenarios.The findings reveal that electric vehicle charging loads are primarily concentrated during midday and nighttime periods,with significant load fluctuations exerting substantial pressure on the grid.In response,this paper proposes strategic interventions including optimized charging infrastructure planning,time-of-use electricity pricing mechanisms,and smart charging technologies to balance grid loads.The results provide a theoretical foundation for electric vehicle load forecasting,smart grid dispatching,and vehicle-grid integration,thereby enhancing grid operational efficiency and sustainability.
