在强光照射下,CdS量子点易发生光腐蚀现象,通过金属掺杂和复合的方式可以提高CdS的光催化性能和光稳定性。采用水热法合成了Zn掺杂CdS/g-C_(3)N_(4)复合纳米材料(Zn-CdS/g-C_(3)N_(4))。利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、...在强光照射下,CdS量子点易发生光腐蚀现象,通过金属掺杂和复合的方式可以提高CdS的光催化性能和光稳定性。采用水热法合成了Zn掺杂CdS/g-C_(3)N_(4)复合纳米材料(Zn-CdS/g-C_(3)N_(4))。利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和傅里叶变换红外光谱(FT-IR)等手段对Zn-CdS/g-C_(3)N_(4)复合材料的形貌、结构和组成等进行了表征。结果表明,Zn-CdS纳米颗粒附着在g-C_(3)N_(4)表面上,从而形成Zn-CdS/g-C_(3)N_(4)复合材料,且复合后材料带隙减小,光生电子-空穴复合率降低。在500 W Xe灯照射下,研究了Zn-CdS/g-C_(3)N_(4)对罗丹明B(RhB)的光催化降解性能。在最优条件下,光照40 min后,所制备的Zn-CdS/g-C_(3)N_(4)对RhB的光催化降解效率达99%。此外,所合成的Zn-CdS/g-C_(3)N_(4)复合材料光稳定性较高、可再生性好。这归因于Zn和Cd的协同作用以及与g-C_(3)N_(4)的复合,促进了光生载流子的分离和转移。展开更多
地质和环境样品中Cd同位素组成的准确、高精度分析对于研究海洋初级生产力、古环境变化、重金属Cd污染的溯源、硫化物矿床的成因和海洋Cd循环等领域具有重要意义.然而,环境和地质样品的低Cd含量和复杂基体给高精度Cd同位素分析带来挑战...地质和环境样品中Cd同位素组成的准确、高精度分析对于研究海洋初级生产力、古环境变化、重金属Cd污染的溯源、硫化物矿床的成因和海洋Cd循环等领域具有重要意义.然而,环境和地质样品的低Cd含量和复杂基体给高精度Cd同位素分析带来挑战.针对地质和环境样品,开发了一种高效可靠的两柱Cd色谱分离流程和高精度的Cd同位素测定方法.在第一柱AG-MP-1M阴离子交换树脂中,主要基体元素(包括≥99%的Sn)被优先去除,随后Cd及少量残余的Sn用4 mL 1 M HNO_(3)溶液快速洗脱.与传统第二柱分离Cd常用的TRU.Spec、UTEVA和BPHA萃取树脂不同,除了Mo、Sn、Zr等元素,TOPO树脂还能有效去除其他潜在残余基体元素(如Mg、Fe、Pb、Ti、V、Ag、Cu、Zn等),且避免了树脂来源有机质引入的问题.Cd同位素比值在Neptune Plus MC-CP-MS上测定,仪器的质量分馏采用Cd的双稀释剂法(111Cd-113Cd)校正.两个标准溶液(NIST SRM 3108和Spex Cd)长期测量值的外部精度优于0.05‰.采用优化的两柱Cd色谱分离流程处理地质和环境标准样品,其测定的Cd同位素值在误差范围内与文献报道值一致,证实了该方法准确可靠且高效实用.此外,首次报道了国内的地质标样GSR-2、GSR-3及土壤标样GSS-6a的Cd同位素组成,这些参考数据为不同实验室间Cd同位素分析能力的评估和数据质量控制提供了依据.综上,本研究为地质和环境样品的高精度Cd同位素分析建立了一种高效实用的可靠分析方法.展开更多
CdS thin films were prepared by chemical-bath-deposited method and the effect of temperature and time on the properties of CdS thin films was studied. Independent of the deposited temperature, the growth was mainly co...CdS thin films were prepared by chemical-bath-deposited method and the effect of temperature and time on the properties of CdS thin films was studied. Independent of the deposited temperature, the growth was mainly controlled by the ion-by-ion growth mechanism at the beginning of the film deposition, then the cluster-by-cluster mechanism came to be dominant. The growth rate increased faster with the increasing of temperature until the thickness reached the limitation, then thickness instead become thinner. The scanning electron micro- scope results revealed that the morphology of the CdS film changed from pinholes to rough, inhomogeneous surface with increasing deposition time and deposition temperature. The X- ray diffraction results showed the film structure was a mixture of two phases： hexagonal and cubic, and it was very important to controll deposition time to the film＇s crystal phase. All films in depth of approxilnate 100 nm existed above 65% transmittance, the absorption edge became ＂red-shift＂ with temperature rising. At 60 and 70℃, with 20 min deposited-time, the energy band gap was more than 2.42 eV and decreased with time, while at 80 and 90℃ the energy band gap was less than 2.42 eV and increased little when the time changed from 10min to 15 nfin at 80℃.展开更多
CdS thin films were deposited by the ion layer gas reaction (TLGAR) method.Structural, chemical, topographical development as well as optical and electrical properties ofas-deposited and annealed thin films were inves...CdS thin films were deposited by the ion layer gas reaction (TLGAR) method.Structural, chemical, topographical development as well as optical and electrical properties ofas-deposited and annealed thin films were investigated by XRD, SEM, XPS, AFM and UV-VIS. The resultsshowed that the thin films are uniform, compact and good in adhesion to the substrates, and thegrowth of the films is 2.8 nm/cycle. The evolution of structure undergoes from the cubic structureto the hexagonal one with a preferred orientation along the (002) plane after annealing at 673 K. Anamount of C, O and Cl impurities can be reduced by increasing the drying temperature or byannealing in N2 atmosphere. It was found that the band gap of the CdS films shifts to higherwavelength after annealing or increasing film thickness. The electrical resistivity decreases withincreasing annealing temperature and film thickness.展开更多
The construction of heterojunction photocatalysts for efficiently utilizing solar energy has attracted considerable attention to solve the energy crisis and reduce environmental pollution.In this study,we use the ener...The construction of heterojunction photocatalysts for efficiently utilizing solar energy has attracted considerable attention to solve the energy crisis and reduce environmental pollution.In this study,we use the energy released from an easily-occurred exothermic chemical reaction to serve as the drive force to trigger the formation of Cd S and C_(3)N_(4) nanocomposites which are successfully fabricated with cadmium nitrate and thiourea without addition of any solvents and protection of inert gas at initial temperature,a little higher than the melting point of thiourea.The as-prepared Cd S/C_(3)N_(4) materials exhibit high efficiency for photocatalytic hydrogen evolution reaction(HER)with the HER rate as high as 15,866μmol/(g·hr)under visible light irradiation(λ>420 nm),which is 89 and 9 times those of pristine C_(3)N_(4) and Cd S,respectively.Also,the apparent quantum efficiency(AQE)of Cd S/C_(3)N_(4)–1:2–200–2(Cd S/C_(3)N_(4)–1:2–200–2 means the ratio of Cd to S is 1:2 and the reaction temperature is set at 200℃ for two hours)reaches 3.25%atλ=420±15 nm.After irradiated for more than 24 hr,the HER efficiencies of Cd S/C_(3)N_(4) do not exhibit any attenuation.The DFT calculation suggests that the charge difference causes an internal electric field from C_(3)N_(4) pointing to Cd S,which can more effectively promote the transfer of photogenerated electrons from Cd S to C_(3)N_(4).Therefore,most HER should occur on C_(3)N_(4) surface where photogenerated electrons accumulate,which largely protects Cd S from photo-corrosion.展开更多
Contour dynamics (CD) method for the motions of typhoon is presented in this paper. The effect of asymmetric inner structure on the typhoon'sanomalous track has been discussed in different environmental steering. ...Contour dynamics (CD) method for the motions of typhoon is presented in this paper. The effect of asymmetric inner structure on the typhoon'sanomalous track has been discussed in different environmental steering. Todemonstrate the feasibility of the method, the track of Typhoon Yancy(9012) isconcerned with. The numerical results show that the method can describe the tendency of looping qualitatively.展开更多
Nanowires have recently attracted more attention because of their low-dimensional structure, tunable optical and electrical properties for next-generation nanoscale optoelectronic devices. Cd S nanowire array, which i...Nanowires have recently attracted more attention because of their low-dimensional structure, tunable optical and electrical properties for next-generation nanoscale optoelectronic devices. Cd S nanowire array, which is(002)-orientation growth and approximately perpendicular to Cd foil substrate, has been fabricated by the solvothermal method. In the temperature-dependent photoluminescence, from short wavelength to long wavelength, four peaks can be ascribed to the emissions from the bandgap, the transition from the holes being bound to the donors or the electrons being bound to the acceptors, the transition from Cd interstitials to Cd vacancies, and the transition from S vacancies to the valence band,respectively. In the photoluminescence of 10 K, the emission originated from the bandgap appears in the form of multiple peaks. Two stronger peaks and five weaker peaks can be observed. The energy differences of the adjacent peaks are close to 38 me V, which is ascribed to the LO phonon energy of Cd S. For the multiple peaks of bandgap emission, from low energy to high energy, the first, second, and third peaks are contributed to the third-order, second-order, and first-order phonon replica of the free exciton A, respectively;the fourth peak is originated from the free exciton A;the fifth peak is contributed to the first-order phonon replica of the excitons bound to neutral donors;the sixth and seventh peaks are originated from the excitons bound to neutral donors and the light polarization parallel to the c axis of hexagonal Cd S, respectively.展开更多
The titanium oxide （TiO2） nanotubes have attracted attention for their use in dye-sensitized solar cells as photoanode. In this study semiconducting cadmium sulfide （CdS） nanoparticles arc grown on top opened TiO2...The titanium oxide （TiO2） nanotubes have attracted attention for their use in dye-sensitized solar cells as photoanode. In this study semiconducting cadmium sulfide （CdS） nanoparticles arc grown on top opened TiO2 nanotubes arrays by radio-frequency magnetron sputtering. X-ray diffraction, scanning electron mieroscopy, transmission electron microscopy and diffuse reflection spectra are used to study structural, morphological and optical properties of the CdS/TiO2 bilayer.展开更多
Ab initio calculations are performed on the electronic, structural, elastic and optical properties of the cubic per- ovskite KCdF3. Tile Kohn Sham equations are solved by applying the full potential linearized augment...Ab initio calculations are performed on the electronic, structural, elastic and optical properties of the cubic per- ovskite KCdF3. Tile Kohn Sham equations are solved by applying the full potential linearized augmented plane wave （FP-LAPW） method. The exchange correlation effects are included through the local density approximation （LDA ）, generalized gradient approximation （GGA） and modified Becke-Johnson （mBJ） exchange potential The calculated lattice constant is in good agreement with the experimental result. The elastic properties such as elastic constants, anisotropy factor, shear modulus, Young＇s modulus and Poisson＇s ratio are calculated. KCdF3 is ductile and elastically anisotropic. The calculations of the electronic band structure, density of states （DOS） and charge density show that this compound has an indirect energy band gap （M-F） with a mixed ionic and covalent bonding. The contribution of the different bands is analyzed from the total and partial density of states curves. Optical response of the dielectric functions, optical reflectivity, absorption coefficient, real part of optical conductivity, refractive index, extinction coefficient and electron energy loss, are presented for the energy range of O-40eV. The compound KCdF3 can be used for high-frequency optical and optoelectronic devices.展开更多
In this study, we will introduce the modified (G'/G<sup>2</sup>)-expansion method to explore some of the exact traveling wave solutions of some nonlinear partial differential equations namely, Phi-4 eq...In this study, we will introduce the modified (G'/G<sup>2</sup>)-expansion method to explore some of the exact traveling wave solutions of some nonlinear partial differential equations namely, Phi-4 equation, Joseph-Egri (TRLW) equation, and Calogro-Degasperis (CD) equation. As a result, we have obtained solutions for the equations expressed in terms of trigonometric, hyperbolic and rational functions. Moreover, some selected solutions are plotted using some specific values for the parameters.展开更多
文摘在强光照射下,CdS量子点易发生光腐蚀现象,通过金属掺杂和复合的方式可以提高CdS的光催化性能和光稳定性。采用水热法合成了Zn掺杂CdS/g-C_(3)N_(4)复合纳米材料(Zn-CdS/g-C_(3)N_(4))。利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和傅里叶变换红外光谱(FT-IR)等手段对Zn-CdS/g-C_(3)N_(4)复合材料的形貌、结构和组成等进行了表征。结果表明,Zn-CdS纳米颗粒附着在g-C_(3)N_(4)表面上,从而形成Zn-CdS/g-C_(3)N_(4)复合材料,且复合后材料带隙减小,光生电子-空穴复合率降低。在500 W Xe灯照射下,研究了Zn-CdS/g-C_(3)N_(4)对罗丹明B(RhB)的光催化降解性能。在最优条件下,光照40 min后,所制备的Zn-CdS/g-C_(3)N_(4)对RhB的光催化降解效率达99%。此外,所合成的Zn-CdS/g-C_(3)N_(4)复合材料光稳定性较高、可再生性好。这归因于Zn和Cd的协同作用以及与g-C_(3)N_(4)的复合,促进了光生载流子的分离和转移。
文摘地质和环境样品中Cd同位素组成的准确、高精度分析对于研究海洋初级生产力、古环境变化、重金属Cd污染的溯源、硫化物矿床的成因和海洋Cd循环等领域具有重要意义.然而,环境和地质样品的低Cd含量和复杂基体给高精度Cd同位素分析带来挑战.针对地质和环境样品,开发了一种高效可靠的两柱Cd色谱分离流程和高精度的Cd同位素测定方法.在第一柱AG-MP-1M阴离子交换树脂中,主要基体元素(包括≥99%的Sn)被优先去除,随后Cd及少量残余的Sn用4 mL 1 M HNO_(3)溶液快速洗脱.与传统第二柱分离Cd常用的TRU.Spec、UTEVA和BPHA萃取树脂不同,除了Mo、Sn、Zr等元素,TOPO树脂还能有效去除其他潜在残余基体元素(如Mg、Fe、Pb、Ti、V、Ag、Cu、Zn等),且避免了树脂来源有机质引入的问题.Cd同位素比值在Neptune Plus MC-CP-MS上测定,仪器的质量分馏采用Cd的双稀释剂法(111Cd-113Cd)校正.两个标准溶液(NIST SRM 3108和Spex Cd)长期测量值的外部精度优于0.05‰.采用优化的两柱Cd色谱分离流程处理地质和环境标准样品,其测定的Cd同位素值在误差范围内与文献报道值一致,证实了该方法准确可靠且高效实用.此外,首次报道了国内的地质标样GSR-2、GSR-3及土壤标样GSS-6a的Cd同位素组成,这些参考数据为不同实验室间Cd同位素分析能力的评估和数据质量控制提供了依据.综上,本研究为地质和环境样品的高精度Cd同位素分析建立了一种高效实用的可靠分析方法.
文摘CdS thin films were prepared by chemical-bath-deposited method and the effect of temperature and time on the properties of CdS thin films was studied. Independent of the deposited temperature, the growth was mainly controlled by the ion-by-ion growth mechanism at the beginning of the film deposition, then the cluster-by-cluster mechanism came to be dominant. The growth rate increased faster with the increasing of temperature until the thickness reached the limitation, then thickness instead become thinner. The scanning electron micro- scope results revealed that the morphology of the CdS film changed from pinholes to rough, inhomogeneous surface with increasing deposition time and deposition temperature. The X- ray diffraction results showed the film structure was a mixture of two phases： hexagonal and cubic, and it was very important to controll deposition time to the film＇s crystal phase. All films in depth of approxilnate 100 nm existed above 65% transmittance, the absorption edge became ＂red-shift＂ with temperature rising. At 60 and 70℃, with 20 min deposited-time, the energy band gap was more than 2.42 eV and decreased with time, while at 80 and 90℃ the energy band gap was less than 2.42 eV and increased little when the time changed from 10min to 15 nfin at 80℃.
文摘CdS thin films were deposited by the ion layer gas reaction (TLGAR) method.Structural, chemical, topographical development as well as optical and electrical properties ofas-deposited and annealed thin films were investigated by XRD, SEM, XPS, AFM and UV-VIS. The resultsshowed that the thin films are uniform, compact and good in adhesion to the substrates, and thegrowth of the films is 2.8 nm/cycle. The evolution of structure undergoes from the cubic structureto the hexagonal one with a preferred orientation along the (002) plane after annealing at 673 K. Anamount of C, O and Cl impurities can be reduced by increasing the drying temperature or byannealing in N2 atmosphere. It was found that the band gap of the CdS films shifts to higherwavelength after annealing or increasing film thickness. The electrical resistivity decreases withincreasing annealing temperature and film thickness.
基金supported by National Key Research and Development Program of China(No.2016YFA0203100)the National Natural Science Foundation of China(Nos.21537004,21777169,and 21621064)the Beijing Municipal Natural Science Foundation(No.8202046)。
文摘The construction of heterojunction photocatalysts for efficiently utilizing solar energy has attracted considerable attention to solve the energy crisis and reduce environmental pollution.In this study,we use the energy released from an easily-occurred exothermic chemical reaction to serve as the drive force to trigger the formation of Cd S and C_(3)N_(4) nanocomposites which are successfully fabricated with cadmium nitrate and thiourea without addition of any solvents and protection of inert gas at initial temperature,a little higher than the melting point of thiourea.The as-prepared Cd S/C_(3)N_(4) materials exhibit high efficiency for photocatalytic hydrogen evolution reaction(HER)with the HER rate as high as 15,866μmol/(g·hr)under visible light irradiation(λ>420 nm),which is 89 and 9 times those of pristine C_(3)N_(4) and Cd S,respectively.Also,the apparent quantum efficiency(AQE)of Cd S/C_(3)N_(4)–1:2–200–2(Cd S/C_(3)N_(4)–1:2–200–2 means the ratio of Cd to S is 1:2 and the reaction temperature is set at 200℃ for two hours)reaches 3.25%atλ=420±15 nm.After irradiated for more than 24 hr,the HER efficiencies of Cd S/C_(3)N_(4) do not exhibit any attenuation.The DFT calculation suggests that the charge difference causes an internal electric field from C_(3)N_(4) pointing to Cd S,which can more effectively promote the transfer of photogenerated electrons from Cd S to C_(3)N_(4).Therefore,most HER should occur on C_(3)N_(4) surface where photogenerated electrons accumulate,which largely protects Cd S from photo-corrosion.
文摘Contour dynamics (CD) method for the motions of typhoon is presented in this paper. The effect of asymmetric inner structure on the typhoon'sanomalous track has been discussed in different environmental steering. Todemonstrate the feasibility of the method, the track of Typhoon Yancy(9012) isconcerned with. The numerical results show that the method can describe the tendency of looping qualitatively.
基金Project supported by the Natural Science Foundation of Henan Province,China(Grant No.202300410304)Key Research Project for Science and Technology of the Education Department of Henan Province,China(Grant No.21A140021)。
文摘Nanowires have recently attracted more attention because of their low-dimensional structure, tunable optical and electrical properties for next-generation nanoscale optoelectronic devices. Cd S nanowire array, which is(002)-orientation growth and approximately perpendicular to Cd foil substrate, has been fabricated by the solvothermal method. In the temperature-dependent photoluminescence, from short wavelength to long wavelength, four peaks can be ascribed to the emissions from the bandgap, the transition from the holes being bound to the donors or the electrons being bound to the acceptors, the transition from Cd interstitials to Cd vacancies, and the transition from S vacancies to the valence band,respectively. In the photoluminescence of 10 K, the emission originated from the bandgap appears in the form of multiple peaks. Two stronger peaks and five weaker peaks can be observed. The energy differences of the adjacent peaks are close to 38 me V, which is ascribed to the LO phonon energy of Cd S. For the multiple peaks of bandgap emission, from low energy to high energy, the first, second, and third peaks are contributed to the third-order, second-order, and first-order phonon replica of the free exciton A, respectively;the fourth peak is originated from the free exciton A;the fifth peak is contributed to the first-order phonon replica of the excitons bound to neutral donors;the sixth and seventh peaks are originated from the excitons bound to neutral donors and the light polarization parallel to the c axis of hexagonal Cd S, respectively.
文摘The titanium oxide （TiO2） nanotubes have attracted attention for their use in dye-sensitized solar cells as photoanode. In this study semiconducting cadmium sulfide （CdS） nanoparticles arc grown on top opened TiO2 nanotubes arrays by radio-frequency magnetron sputtering. X-ray diffraction, scanning electron mieroscopy, transmission electron microscopy and diffuse reflection spectra are used to study structural, morphological and optical properties of the CdS/TiO2 bilayer.
基金Supported by UGC,New Delhi through UGC-BSR(JRF)fellowships
文摘Ab initio calculations are performed on the electronic, structural, elastic and optical properties of the cubic per- ovskite KCdF3. Tile Kohn Sham equations are solved by applying the full potential linearized augmented plane wave （FP-LAPW） method. The exchange correlation effects are included through the local density approximation （LDA ）, generalized gradient approximation （GGA） and modified Becke-Johnson （mBJ） exchange potential The calculated lattice constant is in good agreement with the experimental result. The elastic properties such as elastic constants, anisotropy factor, shear modulus, Young＇s modulus and Poisson＇s ratio are calculated. KCdF3 is ductile and elastically anisotropic. The calculations of the electronic band structure, density of states （DOS） and charge density show that this compound has an indirect energy band gap （M-F） with a mixed ionic and covalent bonding. The contribution of the different bands is analyzed from the total and partial density of states curves. Optical response of the dielectric functions, optical reflectivity, absorption coefficient, real part of optical conductivity, refractive index, extinction coefficient and electron energy loss, are presented for the energy range of O-40eV. The compound KCdF3 can be used for high-frequency optical and optoelectronic devices.
文摘In this study, we will introduce the modified (G'/G<sup>2</sup>)-expansion method to explore some of the exact traveling wave solutions of some nonlinear partial differential equations namely, Phi-4 equation, Joseph-Egri (TRLW) equation, and Calogro-Degasperis (CD) equation. As a result, we have obtained solutions for the equations expressed in terms of trigonometric, hyperbolic and rational functions. Moreover, some selected solutions are plotted using some specific values for the parameters.
