A highly efficient and re liable topology-dual buck half bridge inverter (DBI) is introduced. The existenc e of discontinuous conduction mode (DCM) operation state requires the bias of in du ctor current for DBI imple...A highly efficient and re liable topology-dual buck half bridge inverter (DBI) is introduced. The existenc e of discontinuous conduction mode (DCM) operation state requires the bias of in du ctor current for DBI implemented with linear controllers like ramp comparison SP WM (RCSPWM) controllers. A novel operation scheme for DBI and a hysteresis curre nt controlled dual buck half bridge inverter (HCDBI) are proposed. The bias curr ent required by RCSPWM DBI is eliminated and conduction losses are dramatically reduced. HCDBI has greatly improved the modulation performance in DCM region for the benefit of its excellent command tracking capability. The operational schem e and control strategy are presented. Power losses of the conventional half brid ge inverter (CHBI) and HCDBI are compared with mathematical computation, and exp erimental verification is also executed. Both calculational and experimental res ults verify that HCDBI has a superior switching performance over CHBI. Its exce llent high frequency operational capacity provides another access to realize high fre quency operation of inverters.展开更多
The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel （IPOP） converter consists of multiple boost ...The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel （IPOP） converter consists of multiple boost half bridge （BHB） DC-DC converter modules which are connected in par- allel at the input and output side. This kind of converter is an attractive solution for high power ap- plications. The correlation between input current sharing （ICS） and output current sharing （OCS） of the IPOP converter basic modules is described. Two loop control strategies, consisting of input cur- rent loop and output voltage loop, have been developed to achieve equal ICS and OCS in this present work. The control strategy for the IPOP configuration of boost haft bridge DC-DC converter has been verified for different load conditions （half load and full load）, The IPOP system proposed here is comprising of two modules but it can be extended to three or more. The performance of the pro- posed system along with the control strategy is verified by simulation in MATLAB using Simpower tool. Finally the satisfactory simulation results are obtained.展开更多
A new carbon bridged cyclopentadienyl chromium complex of the type [（C5H4）C（CH3）2 CH2（C5H4N）]CrCl2 was prepared by treatment of CrCl3·（THF）3 in THF solution with the lithium salt of ligand containing cycl...A new carbon bridged cyclopentadienyl chromium complex of the type [（C5H4）C（CH3）2 CH2（C5H4N）]CrCl2 was prepared by treatment of CrCl3·（THF）3 in THF solution with the lithium salt of ligand containing cyclopentadienyl and pyridyl groups. The chromium complex was characterized by 1H NMR and elemental analysis（EA）, and the crystal structure was determined by X-ray diffraction analysis. Activated by Al（i-Bu）3, the chromium complex displayed a very high activity for methyl methacrylate（MMA） polymerization. After 24 hours,more than 95.5% MMA was converted to polymethyl methacrylate（PMMA） with a viscosity average molecular weight（Wη） of 416000 g·mol-1 at 60 ℃ for MMA/ Al（i-Bu）3 /chromium catalyst molar ratio of up to 2000：20：1. Effects of temperature, molar ratios of MMA/catalyst and catalyst/cocatalyst on the polymerization have been studied. The high conversion of MMA and high molecular weight of PMMA with narrow molecular weight distribution is caused by the unique stable active site formed by the new chromium complex and aluminum cocatalyst.展开更多
A NFFP HVI structure which implements high breakdown voltage without using additional FFP and process steps is proposed in this paper. An 850 V high voltage half bridge gate drive IC with the NFFP HVI structure is exp...A NFFP HVI structure which implements high breakdown voltage without using additional FFP and process steps is proposed in this paper. An 850 V high voltage half bridge gate drive IC with the NFFP HVI structure is experimentally realized using a thin epitaxial BCD process. Compared with the MFFP HVI structure, the proposed NFFP HVI structure shows simpler process and lower cost. The high side offset voltage in the half bridge gate drive IC with the NFFP HVI structure is almost as same as that with the self-shielding structure.展开更多
High Speed Drilling Electrical Discharge Machining (HSDEDM) uses controlled electric sparks to erode the metal in a work-piece. Through the years, HSDEDM process has widely been used in high speed drilling and in manu...High Speed Drilling Electrical Discharge Machining (HSDEDM) uses controlled electric sparks to erode the metal in a work-piece. Through the years, HSDEDM process has widely been used in high speed drilling and in manufacturing large aspect ratio holes for hard-to-machine material. The power supplies of HSDEDM providing high power applica-tions can have different topologies. In this paper, a novel Pulsed-Width-Modulated (PWM) half-bridge HSDEDM power supply that achieves Zero-Voltage-Switching (ZVS) for switches and Zero-Current-Switching (ZCS) for the dis-charge gap has been developed. This power supply has excellent features that include minimal component count and inherent protection under short circuit conditions. This topology has an energy conservation feature and removes the need for output bulk capacitors and resistances. Energy used in the erosion process will be controlled by the switched IGBTs in the half-bridge network and be transferred to the gap between the tool and work-piece. The relative tool wear and machining speed of our proposed topology have been compared with that of a normal power supply with current limiting resistances.展开更多
针对模块化多电平换流器型高压直流输电(modular multilevel converter-high voltage direct current,MMC-HVDC)系统,提出了一种创新的换流器桥臂保护方法。首先,分析了在换流器单桥臂接地以及单相桥臂间接地情况下电流的流通路径,构建...针对模块化多电平换流器型高压直流输电(modular multilevel converter-high voltage direct current,MMC-HVDC)系统,提出了一种创新的换流器桥臂保护方法。首先,分析了在换流器单桥臂接地以及单相桥臂间接地情况下电流的流通路径,构建了等值电路,并推导了换流器闭锁前后桥臂电流的表达式。基于此,剖析了故障后三相桥臂电流之和的独有特征,提出了通过检测三相桥臂和电流的基频分量是否为零来区分桥臂内部故障与外部故障的保护策略。鉴于现有桥臂保护方法无法有效应对换流器单相桥臂间短路的问题,进一步研究了此类短路情况下的特性,发现故障相上、下桥臂电流仅包含基频分量而不含直流分量,从而制定了相应的动作判据。将三相桥臂和电流保护与单相桥臂间短路保护判据进行,能够全面识别换流器桥臂上发生的各种故障,丰富和完善了换流器桥臂的保护原理。最终,通过在MATLAB/SimulinK中搭建双极MMC-HVDC系统仿真模型验证了所提出保护方法的有效性和可靠性。展开更多
文摘A highly efficient and re liable topology-dual buck half bridge inverter (DBI) is introduced. The existenc e of discontinuous conduction mode (DCM) operation state requires the bias of in du ctor current for DBI implemented with linear controllers like ramp comparison SP WM (RCSPWM) controllers. A novel operation scheme for DBI and a hysteresis curre nt controlled dual buck half bridge inverter (HCDBI) are proposed. The bias curr ent required by RCSPWM DBI is eliminated and conduction losses are dramatically reduced. HCDBI has greatly improved the modulation performance in DCM region for the benefit of its excellent command tracking capability. The operational schem e and control strategy are presented. Power losses of the conventional half brid ge inverter (CHBI) and HCDBI are compared with mathematical computation, and exp erimental verification is also executed. Both calculational and experimental res ults verify that HCDBI has a superior switching performance over CHBI. Its exce llent high frequency operational capacity provides another access to realize high fre quency operation of inverters.
文摘The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel （IPOP） converter consists of multiple boost half bridge （BHB） DC-DC converter modules which are connected in par- allel at the input and output side. This kind of converter is an attractive solution for high power ap- plications. The correlation between input current sharing （ICS） and output current sharing （OCS） of the IPOP converter basic modules is described. Two loop control strategies, consisting of input cur- rent loop and output voltage loop, have been developed to achieve equal ICS and OCS in this present work. The control strategy for the IPOP configuration of boost haft bridge DC-DC converter has been verified for different load conditions （half load and full load）, The IPOP system proposed here is comprising of two modules but it can be extended to three or more. The performance of the pro- posed system along with the control strategy is verified by simulation in MATLAB using Simpower tool. Finally the satisfactory simulation results are obtained.
基金Funded by the National Natural Science Foundation of China(No.51204125)the Natural Science Foundation of Hubei Province(Nos.2014CFB812 and 2014CFB810)the Open Fund Project Funded by the Key Laboratory of Coal Conversion and New Carbon Materials of Hubei Province in China(No.WKDM201302)
文摘A new carbon bridged cyclopentadienyl chromium complex of the type [（C5H4）C（CH3）2 CH2（C5H4N）]CrCl2 was prepared by treatment of CrCl3·（THF）3 in THF solution with the lithium salt of ligand containing cyclopentadienyl and pyridyl groups. The chromium complex was characterized by 1H NMR and elemental analysis（EA）, and the crystal structure was determined by X-ray diffraction analysis. Activated by Al（i-Bu）3, the chromium complex displayed a very high activity for methyl methacrylate（MMA） polymerization. After 24 hours,more than 95.5% MMA was converted to polymethyl methacrylate（PMMA） with a viscosity average molecular weight（Wη） of 416000 g·mol-1 at 60 ℃ for MMA/ Al（i-Bu）3 /chromium catalyst molar ratio of up to 2000：20：1. Effects of temperature, molar ratios of MMA/catalyst and catalyst/cocatalyst on the polymerization have been studied. The high conversion of MMA and high molecular weight of PMMA with narrow molecular weight distribution is caused by the unique stable active site formed by the new chromium complex and aluminum cocatalyst.
基金This work was supported by the National Nature Science Foundation of China under Grant No.60436030.
文摘A NFFP HVI structure which implements high breakdown voltage without using additional FFP and process steps is proposed in this paper. An 850 V high voltage half bridge gate drive IC with the NFFP HVI structure is experimentally realized using a thin epitaxial BCD process. Compared with the MFFP HVI structure, the proposed NFFP HVI structure shows simpler process and lower cost. The high side offset voltage in the half bridge gate drive IC with the NFFP HVI structure is almost as same as that with the self-shielding structure.
文摘High Speed Drilling Electrical Discharge Machining (HSDEDM) uses controlled electric sparks to erode the metal in a work-piece. Through the years, HSDEDM process has widely been used in high speed drilling and in manufacturing large aspect ratio holes for hard-to-machine material. The power supplies of HSDEDM providing high power applica-tions can have different topologies. In this paper, a novel Pulsed-Width-Modulated (PWM) half-bridge HSDEDM power supply that achieves Zero-Voltage-Switching (ZVS) for switches and Zero-Current-Switching (ZCS) for the dis-charge gap has been developed. This power supply has excellent features that include minimal component count and inherent protection under short circuit conditions. This topology has an energy conservation feature and removes the need for output bulk capacitors and resistances. Energy used in the erosion process will be controlled by the switched IGBTs in the half-bridge network and be transferred to the gap between the tool and work-piece. The relative tool wear and machining speed of our proposed topology have been compared with that of a normal power supply with current limiting resistances.
文摘针对模块化多电平换流器型高压直流输电(modular multilevel converter-high voltage direct current,MMC-HVDC)系统,提出了一种创新的换流器桥臂保护方法。首先,分析了在换流器单桥臂接地以及单相桥臂间接地情况下电流的流通路径,构建了等值电路,并推导了换流器闭锁前后桥臂电流的表达式。基于此,剖析了故障后三相桥臂电流之和的独有特征,提出了通过检测三相桥臂和电流的基频分量是否为零来区分桥臂内部故障与外部故障的保护策略。鉴于现有桥臂保护方法无法有效应对换流器单相桥臂间短路的问题,进一步研究了此类短路情况下的特性,发现故障相上、下桥臂电流仅包含基频分量而不含直流分量,从而制定了相应的动作判据。将三相桥臂和电流保护与单相桥臂间短路保护判据进行,能够全面识别换流器桥臂上发生的各种故障,丰富和完善了换流器桥臂的保护原理。最终,通过在MATLAB/SimulinK中搭建双极MMC-HVDC系统仿真模型验证了所提出保护方法的有效性和可靠性。
