Ground reinforcement is crucial for tunnel construction, especially in soft rock tunnels. Existing analytical models are inadequate for predicting the ground reaction curves (GRCs) for reinforced tunnels in strain-sof...Ground reinforcement is crucial for tunnel construction, especially in soft rock tunnels. Existing analytical models are inadequate for predicting the ground reaction curves (GRCs) for reinforced tunnels in strain-softening (SS) rock masses. This study proposes a novel analytical model to determine the GRCs of SS rock masses, incorporating ground reinforcement and intermediate principal stress (IPS). The SS constitutive model captures the progressive post- peak failure, while the elastic-brittle model simulates reinforced rock masses. Nine combined states are innovatively investigated to analyze plastic zone development in natural and reinforced regions. Each region is analyzed separately, and coupled through boundary conditions at interface. Comparison with three types of existing models indicates that these models overestimate reinforcement effects. The deformation prediction errors of single geological material models may exceed 75%. Furthermore, neglecting softening and residual zones in natural regions could lead to errors over 50%. Considering the IPS can effectively utilize the rock strength to reduce tunnel deformation by at least 30%, thereby saving on reinforcement and support costs. The computational results show a satisfactory agreement with the monitoring data from a model test and two tunnel projects. The proposed model may offer valuable insights into the design and construction of reinforced tunnel engineering.展开更多
Rockfall disasters can result in damages to various structures such as highways and buildings.Ground reinforced embankments(GRE) are one of the barrier types used to prevent rockfall. GRE absorb the impact energy of t...Rockfall disasters can result in damages to various structures such as highways and buildings.Ground reinforced embankments(GRE) are one of the barrier types used to prevent rockfall. GRE absorb the impact energy of the hitting rock blocks by the movement of fine soil particles triggered by the penetration of the rock in the soil. In this process,stresses in the wall are distributed in both the transverse and longitudinal directions. GREs on the valley slopes can be hundreds of meters long, so such structures cause difficulty in transition to valley slope behind the embankments. Especially, access to areas such as agricultural, pasture or forest lands behind the GRE becomes a challenge. The current paper presents the design of passageways in GRE using the finite element method to provide safe corridors at several different parts within the hundreds of meters long structures. A total of 4 different passageway designs for GRE were developed. Each finite element model was subjected to rockfall with different kinetic energies of 500, 1000 and 3000kJ. The obtained results showed that 44% increase in structure volume increased the impact capacity from 500 kJ to 3000kJ.Furthermore, the critical displacement caused by rockfall impact with an energy of 3000 kJ was reduced by 31%. It was determined that the support applied with the reinforced concrete wall did not reach the desired energy absorption value due to its rigid structure, and even collapsed at 3000 kJ.展开更多
基金Projects(52208382, 52278387, 51738002) supported by the National Natural Science Foundation of ChinaProject(2022YJS072) supported by the Fundamental Research Funds for the Central Universities,China。
文摘Ground reinforcement is crucial for tunnel construction, especially in soft rock tunnels. Existing analytical models are inadequate for predicting the ground reaction curves (GRCs) for reinforced tunnels in strain-softening (SS) rock masses. This study proposes a novel analytical model to determine the GRCs of SS rock masses, incorporating ground reinforcement and intermediate principal stress (IPS). The SS constitutive model captures the progressive post- peak failure, while the elastic-brittle model simulates reinforced rock masses. Nine combined states are innovatively investigated to analyze plastic zone development in natural and reinforced regions. Each region is analyzed separately, and coupled through boundary conditions at interface. Comparison with three types of existing models indicates that these models overestimate reinforcement effects. The deformation prediction errors of single geological material models may exceed 75%. Furthermore, neglecting softening and residual zones in natural regions could lead to errors over 50%. Considering the IPS can effectively utilize the rock strength to reduce tunnel deformation by at least 30%, thereby saving on reinforcement and support costs. The computational results show a satisfactory agreement with the monitoring data from a model test and two tunnel projects. The proposed model may offer valuable insights into the design and construction of reinforced tunnel engineering.
文摘Rockfall disasters can result in damages to various structures such as highways and buildings.Ground reinforced embankments(GRE) are one of the barrier types used to prevent rockfall. GRE absorb the impact energy of the hitting rock blocks by the movement of fine soil particles triggered by the penetration of the rock in the soil. In this process,stresses in the wall are distributed in both the transverse and longitudinal directions. GREs on the valley slopes can be hundreds of meters long, so such structures cause difficulty in transition to valley slope behind the embankments. Especially, access to areas such as agricultural, pasture or forest lands behind the GRE becomes a challenge. The current paper presents the design of passageways in GRE using the finite element method to provide safe corridors at several different parts within the hundreds of meters long structures. A total of 4 different passageway designs for GRE were developed. Each finite element model was subjected to rockfall with different kinetic energies of 500, 1000 and 3000kJ. The obtained results showed that 44% increase in structure volume increased the impact capacity from 500 kJ to 3000kJ.Furthermore, the critical displacement caused by rockfall impact with an energy of 3000 kJ was reduced by 31%. It was determined that the support applied with the reinforced concrete wall did not reach the desired energy absorption value due to its rigid structure, and even collapsed at 3000 kJ.
