Grooved tuning forks with hierarchical structures have become some of the most widely used piezoelectric quartz microelectromechanical system devices;however,fabricating these devices requires multi-step processes due...Grooved tuning forks with hierarchical structures have become some of the most widely used piezoelectric quartz microelectromechanical system devices;however,fabricating these devices requires multi-step processes due to the complexity of etching of quartz,particularly in specific orientations of the crystal lattice.This paper proposes a one-step fabrication strategy that can form a complete hierarchical structure with only a single etching process using novel lithography patterns.The core principle of this strategy is based on the effect of the size of the groove patterns on quartz etching,whereby trenches of varying depths can be created in a fixed etching time by adjusting the width of the hard mask.Specifically,the device outline and grooved structure can be completed using a seamlessly designed etching pattern and optimized time.Furthermore,the etching structure itself influences the etching results.It was found that dividing a wide trench by including a wall to separate it into two narrow trenches significantly reduces the etching rate,allowing for predictable tuning of the etching rate for wider grooves.This effectively increases the usability and flexibility of the one-step strategy.This was applied to the manufacture of an ultra-small quartz grooved tuning fork resonator with a frequency of 32.768 kHz in a single step,increasing production efficiency by almost 45%and reducing costs by almost 30%compared to current methods.This has great potential for improving the productivity of grooved tuning fork devices.It can also be extended to the fabrication of other quartz crystal devices requiring hierarchical structures.展开更多
Objective: To explore the application value of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation. Methods: Seventy-five patients admitted to our Department of Trauma Su...Objective: To explore the application value of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation. Methods: Seventy-five patients admitted to our Department of Trauma Surgery from June 2022 to April 2024 who underwent rib fracture osteotomy and internal fixation were selected. According to the types of drainage tubes left in the patients after the operation, they were divided into the observation group (35 cases who were left with disposable grooved negative pressure drainage tubes) and the control group (40 cases who were left with closed silicone thoracic drainage tubes). Comparison of chest drainage, pain, postoperative complications, secondary chest penetration rate, drain placement time, hospitalization time, and treatment costs were compared between the two groups. Results: The total postoperative chest drainage volume of the observation group was less than that of the control group (P < 0.05);the degree of pain, the incidence of postoperative complications, and the rate of secondary chest puncture in the observation group were lower than that of the control group three days after the operation (P < 0.05);and the time of drain placement in the observation group was shorter than that of the control group (P < 0.05). Conclusion: The application of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation can significantly improve patients’ postoperative pain and discomfort, reduce complications, lower the rate of secondary chest penetration, promote patients’ postoperative recovery, decrease the amount of postoperative chest drainage, and shorten the time of drain placement, which is worthy of clinical promotion and application.展开更多
A rotary swaging machine was applied to fabricating pipe reduction for miniature inner grooved copper tube （MIGCT） heat pipes. Compared with conventional swaging method, the axial feed of the designed rotary swaging...A rotary swaging machine was applied to fabricating pipe reduction for miniature inner grooved copper tube （MIGCT） heat pipes. Compared with conventional swaging method, the axial feed of the designed rotary swaging machine was reached by a constant pushing force. The deformation of grooves in pipe reduced section during rotary swaging was analyzed. The shrinkage and extensibility of pipe reduction were measured and calculated. Furthermore, four aspects, including outer diameter, surface roughness, extensibility and processing time of pipe reduction, which were influenced by the pushing force, were considered. The results show that the tube wall thickness increases gradually along the z-axis at sinking section. However, the outer diameters, surface roughness and micro-cracks at reduced section tend to decrease along the z-axis. Besides, the effect of variation in the pushing force on the extensibility is limited while an increase in the pushing force results in a decrease of surface roughness. Therefore, a large pushing force within the limit is beneficial to pipe reduction manufacturing during rotary swaging process.展开更多
A 0. 1μm SOI grooved gate pMOSFET with 5.6nm gate oxide is fabricated and demonstrated. The groove depth is 180nm. The transfer characteristics and the output characteristics are shown. At Vds = -1. 5V,the drain satu...A 0. 1μm SOI grooved gate pMOSFET with 5.6nm gate oxide is fabricated and demonstrated. The groove depth is 180nm. The transfer characteristics and the output characteristics are shown. At Vds = -1. 5V,the drain saturation current is 380μA and the off-state leakage current is 1.9nA;the sub-threshold slope is 115mV/dec at Vds = -0. 1V and DIBL factor is 70. 7mV/V. The electrical characteristic comparison between the 0.1μm SOI groovedgate pMOSFET and the 0. 1μm bulk grooved gate one with the same process demonstrates that a 0. 1μm SOI grooved gate pMOSFET has better characteristics in current-driving capability and sub-threshold slope.展开更多
The surface morphology of micro-and nano-scale fber determines its application to a great extent.At present,a variety of secondary morphology of microfbers and nanofbers,such as porous,wrinkle,groove and so on,have be...The surface morphology of micro-and nano-scale fber determines its application to a great extent.At present,a variety of secondary morphology of microfbers and nanofbers,such as porous,wrinkle,groove and so on,have been prepared.Among them,grooved micro-and nano-fbers are attracting more and more attention because of their unique morphology and properties.In this paper,we review the literature on grooved fbers due to void-based elongation,wrinkle-based elongation,collapsed jet-based elongation and selective dissolution.By contrast,the method of phase separation is simpler and more commonly used than selective dissolution.What is more interesting is that the number and depth of grooves on the fber surface can be well controlled by adjusting the experimental parameters,which greatly increases the research value and application felds of grooves micro-nano fbers.Grooved fbers can be made from a range of materials:polycaprolactone(PCL),polylactic acid(PLA),polystyrene(PS),cellulose acetate butyrate(CAB)and other polymers.The applications of grooved micro-nano fbers are discussed in detail,including peripheral nerve regeneration,water manipulation and energy conversion.展开更多
A computational fluid dynamics （CFD） simulation method based on 3-D Navier Stokes equation and Arbitrary Lagrangian Eulerian （ALE） method is presented to analyze the grooved slip- per performance of piston pump. T...A computational fluid dynamics （CFD） simulation method based on 3-D Navier Stokes equation and Arbitrary Lagrangian Eulerian （ALE） method is presented to analyze the grooved slip- per performance of piston pump. The moving domain of grooved slipper is transformed into a fixed reference domain by the ALE method, which makes it convenient to take the effects of rotate speed, body force, temperature, and oil viscosity into account. A geometric model to express the complex structure, which covers the orifice of piston and slipper, vented groove and the oil film, is constructed. Corresponding to different oil film thicknesses calculated in light of hydrostatic equilibrium theory and boundary conditions, a set of simulations is conducted in COMSOL to analyze the pump characteristics and effects of geometry （groove width and radius, orifice size） on these characteristics. Furthermore, the mechanics and hydraulics analyses are employed to validate the CFD model, and there is an excellent agreement between simulation and analytical results. The simulation results show that the sealing land radius, orifice size and groove width all dramatically affect the slipper behavior, and an optimum tradeoff among these factors is conducive to optimizing the pump design.展开更多
Dynamic failure and ejection characteristics of a periodic grooved Sn surface under unsupported shock loading are studied using a smoothed particle hydrodynamics method. An ＂Eiffel Tower＂ spatial structure is observ...Dynamic failure and ejection characteristics of a periodic grooved Sn surface under unsupported shock loading are studied using a smoothed particle hydrodynamics method. An ＂Eiffel Tower＂ spatial structure is observed, which is com- posed of high-speed jet tip, high-density jet slug, longitudinal tensile sparse zone, and complex broken zone between grooves. It is very different from the spike-bubble structure under supported shocks, and has been validated by detonation loading experiments. In comparison with that under supported shocks at the same peak pressure, the high-speed ejecta decreases obviously, whereas the truncated location of ejecta moves towards the interior of the sample and the total mass of ejecta increases due to the vast existence of low-speed broken materials. The shock wave profile determines mainly the total ejection amount, while the variation of V-groove angle will significantly alter the distribution of middle- and high-speed ejecta, and the maximum ejecta velocity has a linear corretation with the groove angle.展开更多
In order to improve the efficiency of film cooling, numerical investigation was carried out to study the effects of different film-cooled plates on surface heat transfer. Both grooved and non-grooved surfaces were con...In order to improve the efficiency of film cooling, numerical investigation was carried out to study the effects of different film-cooled plates on surface heat transfer. Both grooved and non-grooved surfaces were concerned. The modeling was per- formed using Fluent software with the adoption of Shear-Stress Transport （SST） k-ωmodel as the turbulence closure. The coolant was supplied by a single film cooling hole with an inclination angle of 30°. The Mach numbers for the coolant flow and the mainstream flow were fixed at 0 and 0.6, respectively. At three blowing ratios of 0.5, 1.0 and 1.5, the aerodynamic behaviour of the mixing process as well as the heat transfer performance of the film cooling were presented. The numerical results were validated using experimental data extracted from a benchmark test. Good agreements between numerical results and the ex- perimental data were observed. For the film cooling efficiency, it shows that both local and laterally averaged cooling effectiveness can be improved by the non-smooth surface at different blowing ratios. Using the grooved surface, the turbulence intensity upon the plate can be reduced notably, and the mixing between the two flows is weakened due to the reduced turbu lence level. The results indicate that the cooling effectiveness of film cooling can be enhanced by applying the grooved surface.展开更多
Surface topographies such as micrometric edges and grooves have been widely used to improve neuron outgrowth.However,finding the mechanism of neuron–surface interactions on grooved substrates remains a challenge.In t...Surface topographies such as micrometric edges and grooves have been widely used to improve neuron outgrowth.However,finding the mechanism of neuron–surface interactions on grooved substrates remains a challenge.In this work,PC12 cells and chick forebrain neurons(CFNs)were cultured on grooved and smooth polyacrylonitrile substrates.It was found that CFNs showed a tendency of growing across groove ridges;while PC12 cells were only observed to grow in the longitudinal direction of grooves.To further investigate these observations,a 3D physical model of axonal outgrowth was developed.In this model,axon shafts are simulated as elastic 3D beams,accounting for the axon outgrowth as well as the focal contacts between axons and substrates.Moreover,the bending direction of axon tips during groove ridge crossing is governed by the energy minimization principle.Our physical model predicts that axonal groove ridge crossing is contributed by the bending compliance of axons,caused by lower Young’s modulus and smaller diameters.This work will aid the understanding of the mechanisms involved in axonal alignment and elongation of neurons guided by grooved substrates,and the obtained insights can be used to enhance the design of instructive scaffolds for nerve tissue engineering and regeneration applications.展开更多
Annular grooved projectiles(AGPs)have drawn ongoing concerns as an advanced penetrator for their excellent anti-rebound capability in impacting metal plates.They could become embedded solidly in the target surface dur...Annular grooved projectiles(AGPs)have drawn ongoing concerns as an advanced penetrator for their excellent anti-rebound capability in impacting metal plates.They could become embedded solidly in the target surface during low-velocity impact.In this investigation,the firm embedding behavior of AGP was observed by impact experiments.Corresponding numerical simulations provided a better understanding of this process.Experimental and numerical results indicated that the firm embedding behavior of AGP was mainly due to the filling-material in the groove rather than the friction between the projectile and target,unlike traditional shape such as conical projectile.According to observation,firm embedding process can generally be subdivided into four stages:initial-cratering stage,groove-filling stage,fillingmaterial failure stage and rebound vibration stage.Moreover,the damage mechanics of target material around crater was obtained through microscopic tests.A comparison of the cross-sectional figures between the experiment and simulation proved that the analysis and the proposed method were reasonable and feasible,which further demonstrated that the firm embedding behavior has application potential in new concept warheads.展开更多
Heat exchangers are integral parts of important industrial units such as petrochemicals,medicine and power plants.Due to the importance of systems energy consumption,different modifications have been applied on heat e...Heat exchangers are integral parts of important industrial units such as petrochemicals,medicine and power plants.Due to the importance of systems energy consumption,different modifications have been applied on heat exchangers in terms of size and structure.In this study,a novel heat exchanger with helically grooved annulus shell and helically coiled tube was investigated by numerical simulation.Helically grooves with the same pitch of the helical coil tube and different depth are created on the inner and outer wall of annulus shell to improve the thermal performance of heat exchanger.In the first section,thermal performance of the shell and coil heat exchanger with the helical grooves on its outer shell wall was compared with same but without helical grooves.At the second section,helically grooves created on both outer and inner wall of the annulus shell with different groove depths.The results showed that the heat exchanger with grooves on both inner and outer shell wall has better thermal performance up to 20%compared to the heat exchanger with grooves on only outer shell wall.The highest thermal performance achieves at lower flow rates and higher groove depths whereas the pressure drop did not increase significantly.展开更多
A mathematical model was developed to predict the maximum heat transfer capacity of high temperature heat pipe with triangular grooved wick. The effects of the inclination angle and geometry structure were considered ...A mathematical model was developed to predict the maximum heat transfer capacity of high temperature heat pipe with triangular grooved wick. The effects of the inclination angle and geometry structure were considered in the proposed model.Maximum heat transfer capacity was also investigated experimentally. The model was validated by comparing with the experimental results. The maximum heat transfer capacity increases with the vapor core radius increasing. Compared with the inclination angle of0°, the maximum heat transfer capacity increases at the larger inclination angle, and the change with temperature is larger. The performance of heat pipe with triangular grooved wick is greatly influenced by gravity, so it is not recommended to be applied to the dish solar heat pipe receiver.展开更多
Kerfless technology is a promising alternative for reducing cost and providing flexible thin crystals in silicon-based semiconductors. In this work we propose a protruded seed substrate technology to prepare flexible ...Kerfless technology is a promising alternative for reducing cost and providing flexible thin crystals in silicon-based semiconductors. In this work we propose a protruded seed substrate technology to prepare flexible monocrystalline Si thin film economically. Grooved seed substrate is fabricated by using SiNx thin film as a mask for the wet-etching and thermal oxidation process. After the SiNx layer on the wedged strip is removed by hot phosphoric acid, the pre-defined structured substrate is achieved with the top of the strip serving as the seed site where there is no oxide layer. And a preferred growth of epitaxial Si on the substrate is performed by introducing an intermittent feed method for silicon source gas. The technique in this paper obviously enhances the mechanical stability of the seed structure and the growth behavior on the seed sites, compared with our previous techniques, so this technique promises to be used in the industrial fabrication of flexible Si-based devices.展开更多
Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance.One special ballistic performance is the embedding effect,which can achieve a delayed high-explosive reac...Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance.One special ballistic performance is the embedding effect,which can achieve a delayed high-explosive reaction on the target surface.This embedding effect includes a rebound phase that is significantly different from the traditional penetration process.To better study embedment behavior,this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration.Specifically,we conducted a series of lowvelocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy.We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations.The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure,but then it increased significantlydthat is,the fluctuation of penetration resistance was affected by the irregular nose shape.Moreover,we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations.The combination of these phenomena revealed the embedment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance.The embedment was achieved primarily by the target material filled in the groove structure.Therefore,preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.展开更多
The motivation of this work is to investigate a grooved surface's drag reduction. The viscous flow through a two-dimensional microchannel with the grooved surface is analyzed by the lattice Boltzmann method(LBM). ...The motivation of this work is to investigate a grooved surface's drag reduction. The viscous flow through a two-dimensional microchannel with the grooved surface is analyzed by the lattice Boltzmann method(LBM). The effects of the grooved surface on the streamline patterns, the velocity distributions near wall region and the fluid shear stress distributions on the walls at different Reynolds numbers are studied. In addition, the influences of the groove's geometrical parameters on the grooved surface's drag reduction are discussed. The numerical results confirm the grooved surface's drag reduction and present the drag reduction law of the grooved surface.展开更多
Selecting H-60 PVC foam, four-axis E-glass non-woven fabric and vinyl resin, a type of innovative reinforced sandwich composite as grooved perforation sandwich （GPS） were fabricated by VIMP. The interfacial structur...Selecting H-60 PVC foam, four-axis E-glass non-woven fabric and vinyl resin, a type of innovative reinforced sandwich composite as grooved perforation sandwich （GPS） were fabricated by VIMP. The interfacial structure between the face and core of the sandwich is innovative because of the acuminate grooves in both sides of foam core and the holes perforated along core’s height. The fabrication results show that VIMP is a high-speed and cost-effective manufacturing method. The mechanical properties of the reinforced foam core were tested. The typical flexural failure modes of sandwich specimens were observed. The flexural stiffness and ultimate bearing capacity of sandwich were studied by ordinary sandwich beam theory and finite element method.展开更多
The denim woven by cotton and grooved polyester fiber (Coolcool) is desized by amylase and scouring enzyme. The technological parameters are discussed,such as concentrations of amylase and compound enzyme HK,time,temp...The denim woven by cotton and grooved polyester fiber (Coolcool) is desized by amylase and scouring enzyme. The technological parameters are discussed,such as concentrations of amylase and compound enzyme HK,time,temperature,and pH value. The technical conditions are optimized through experimental analysis. This eco-finishing process is very helpful to improve the denim production and the performance of moisture absorption and sweat transmission function.展开更多
Grooved gate structure Metal-Oxide-Semiconductor (MOS) device is consideredas the most promising candidate used in deep and super-deep sub-micron region, for it cansuppress hot carrier effect and short channel effect ...Grooved gate structure Metal-Oxide-Semiconductor (MOS) device is consideredas the most promising candidate used in deep and super-deep sub-micron region, for it cansuppress hot carrier effect and short channel effect deeply. Based on the hydrodynamic energytransport model, using two-dimensional device simulator Medici, the relation between structureparameters and hot carrier effect immunity for deep-sub-micron N-channel MOSFET's is studiedand compared with that of counterpart conventional planar device in this paper. The examinedstructure parameters include negative junction depth, concave corner and effective channel length.Simulation results show that grooved gate device can suppress hot carrier effect deeply even indeep sub-micron region. The studies also indicate that hot carrier effect is strongly influencedby the concave corner and channel length for grooved gate device. With the increase of concavecorner, the hot carrier effect in grooved gate MOSFET decreases sharply, and with the reducingof effective channel length, the hot carrier effect becomes large.展开更多
The effects of the wavelength and orientation of machined grooves on a mold surface, casting speed, and melt superheat on the formation of surface marks on as-cast ingots were studied with an immersion casting tester ...The effects of the wavelength and orientation of machined grooves on a mold surface, casting speed, and melt superheat on the formation of surface marks on as-cast ingots were studied with an immersion casting tester and copper mold chill blocks. The mold surface topographies included a polished smooth surface, and those with machined unidirectional parallel contoured grooves oriented either parallel (vertical) or perpendicular (horizontal) to the casting direction. The unidirectional grooves were 0.232 mm deep with wavelength or spacing between 1 and 15 mm. The casting speed and melt superheat were between 1 and 200 mm/s, and 10 and 50 K, respectively. Two primary types of surface marks were observed on ingots cast with the copper mold with smooth surface topography, namely the finer and closely spaced ripples (Type I), and the widely spaced but coarser laps (Type II). The latter were more prevalent at the higher casting speeds and melt superheats. Qualitatively, formation of both types of surface marks on the as-cast ingots of the aluminum alloy 3003 appeared to be alleviated by increase in casting speed and melt superheat, and by the use of molds with grooved surface topography. In fact, casting with a mold surface with 1 mm spaced grooves that are perpendicular to the casting direction eliminated the formation of surface marks at casting speeds greater than 1 mm/s. It also improved the uniformity of the ingot subsurface microstructure and eliminated the associated subsurface segregation.展开更多
An application of the boundary element method (BEM) is presented to calculate the behaviors of a spiral grooved thrust bearing (SGTB). The basic reason is that the SGTB has very complex boundary conditions that can hi...An application of the boundary element method (BEM) is presented to calculate the behaviors of a spiral grooved thrust bearing (SGTB). The basic reason is that the SGTB has very complex boundary conditions that can hinder the effective or sufficient applications of the finite difference method (FDM) and the finite element method (FEM), despite some existing work based on the FDM and the FEM. In other to apply the BEM, the pressure control equation, i. e., Reynolds' equation, is first transformed into Laplace's and Poisson's form of the equations. Discretization of the SGTB with a set of boundary elements is thus explained in detail, which also includes the handling of boundary conditions. The Archimedean SGTB is chosen as an example of the application Of BEM, and the relationship between the behaviors and structure parameters of the bearing are found and discussed through this calculation. The obtained results lay a solid foundation for a further work of the design of the SGTB.展开更多
文摘Grooved tuning forks with hierarchical structures have become some of the most widely used piezoelectric quartz microelectromechanical system devices;however,fabricating these devices requires multi-step processes due to the complexity of etching of quartz,particularly in specific orientations of the crystal lattice.This paper proposes a one-step fabrication strategy that can form a complete hierarchical structure with only a single etching process using novel lithography patterns.The core principle of this strategy is based on the effect of the size of the groove patterns on quartz etching,whereby trenches of varying depths can be created in a fixed etching time by adjusting the width of the hard mask.Specifically,the device outline and grooved structure can be completed using a seamlessly designed etching pattern and optimized time.Furthermore,the etching structure itself influences the etching results.It was found that dividing a wide trench by including a wall to separate it into two narrow trenches significantly reduces the etching rate,allowing for predictable tuning of the etching rate for wider grooves.This effectively increases the usability and flexibility of the one-step strategy.This was applied to the manufacture of an ultra-small quartz grooved tuning fork resonator with a frequency of 32.768 kHz in a single step,increasing production efficiency by almost 45%and reducing costs by almost 30%compared to current methods.This has great potential for improving the productivity of grooved tuning fork devices.It can also be extended to the fabrication of other quartz crystal devices requiring hierarchical structures.
文摘Objective: To explore the application value of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation. Methods: Seventy-five patients admitted to our Department of Trauma Surgery from June 2022 to April 2024 who underwent rib fracture osteotomy and internal fixation were selected. According to the types of drainage tubes left in the patients after the operation, they were divided into the observation group (35 cases who were left with disposable grooved negative pressure drainage tubes) and the control group (40 cases who were left with closed silicone thoracic drainage tubes). Comparison of chest drainage, pain, postoperative complications, secondary chest penetration rate, drain placement time, hospitalization time, and treatment costs were compared between the two groups. Results: The total postoperative chest drainage volume of the observation group was less than that of the control group (P < 0.05);the degree of pain, the incidence of postoperative complications, and the rate of secondary chest puncture in the observation group were lower than that of the control group three days after the operation (P < 0.05);and the time of drain placement in the observation group was shorter than that of the control group (P < 0.05). Conclusion: The application of disposable grooved negative pressure drainage tubes in rib fracture incision and internal fixation can significantly improve patients’ postoperative pain and discomfort, reduce complications, lower the rate of secondary chest penetration, promote patients’ postoperative recovery, decrease the amount of postoperative chest drainage, and shorten the time of drain placement, which is worthy of clinical promotion and application.
基金Project (U0834002) supported by the Key Program of NSFC Guangdong Joint Funds of ChinaProjects (51005079, 20976055) supported by the National Natural Science Foundation of China+1 种基金Project (10451064101005146) supported by the Natural Science Foundation of Guangdong Province, ChinaProject (20100172120001) supported by Specialized Research Fund for the Doctoral Program of Higher Education, China
文摘A rotary swaging machine was applied to fabricating pipe reduction for miniature inner grooved copper tube （MIGCT） heat pipes. Compared with conventional swaging method, the axial feed of the designed rotary swaging machine was reached by a constant pushing force. The deformation of grooves in pipe reduced section during rotary swaging was analyzed. The shrinkage and extensibility of pipe reduction were measured and calculated. Furthermore, four aspects, including outer diameter, surface roughness, extensibility and processing time of pipe reduction, which were influenced by the pushing force, were considered. The results show that the tube wall thickness increases gradually along the z-axis at sinking section. However, the outer diameters, surface roughness and micro-cracks at reduced section tend to decrease along the z-axis. Besides, the effect of variation in the pushing force on the extensibility is limited while an increase in the pushing force results in a decrease of surface roughness. Therefore, a large pushing force within the limit is beneficial to pipe reduction manufacturing during rotary swaging process.
文摘A 0. 1μm SOI grooved gate pMOSFET with 5.6nm gate oxide is fabricated and demonstrated. The groove depth is 180nm. The transfer characteristics and the output characteristics are shown. At Vds = -1. 5V,the drain saturation current is 380μA and the off-state leakage current is 1.9nA;the sub-threshold slope is 115mV/dec at Vds = -0. 1V and DIBL factor is 70. 7mV/V. The electrical characteristic comparison between the 0.1μm SOI groovedgate pMOSFET and the 0. 1μm bulk grooved gate one with the same process demonstrates that a 0. 1μm SOI grooved gate pMOSFET has better characteristics in current-driving capability and sub-threshold slope.
基金We acknowledge the fnancial supports from National Natural Science Foundation of China(Grant Nos.82002290)Shanghai Sailing Program(No.20YF1436000)Fundamental Research Funds for the Central Universities(2232021G-06).
文摘The surface morphology of micro-and nano-scale fber determines its application to a great extent.At present,a variety of secondary morphology of microfbers and nanofbers,such as porous,wrinkle,groove and so on,have been prepared.Among them,grooved micro-and nano-fbers are attracting more and more attention because of their unique morphology and properties.In this paper,we review the literature on grooved fbers due to void-based elongation,wrinkle-based elongation,collapsed jet-based elongation and selective dissolution.By contrast,the method of phase separation is simpler and more commonly used than selective dissolution.What is more interesting is that the number and depth of grooves on the fber surface can be well controlled by adjusting the experimental parameters,which greatly increases the research value and application felds of grooves micro-nano fbers.Grooved fbers can be made from a range of materials:polycaprolactone(PCL),polylactic acid(PLA),polystyrene(PS),cellulose acetate butyrate(CAB)and other polymers.The applications of grooved micro-nano fbers are discussed in detail,including peripheral nerve regeneration,water manipulation and energy conversion.
基金the support from the National Natural Science Foundation of China(No.51205007)the Specialized Research Fund for the Doctoral Program of Chinese Higher Education(No.20131102120019)
文摘A computational fluid dynamics （CFD） simulation method based on 3-D Navier Stokes equation and Arbitrary Lagrangian Eulerian （ALE） method is presented to analyze the grooved slip- per performance of piston pump. The moving domain of grooved slipper is transformed into a fixed reference domain by the ALE method, which makes it convenient to take the effects of rotate speed, body force, temperature, and oil viscosity into account. A geometric model to express the complex structure, which covers the orifice of piston and slipper, vented groove and the oil film, is constructed. Corresponding to different oil film thicknesses calculated in light of hydrostatic equilibrium theory and boundary conditions, a set of simulations is conducted in COMSOL to analyze the pump characteristics and effects of geometry （groove width and radius, orifice size） on these characteristics. Furthermore, the mechanics and hydraulics analyses are employed to validate the CFD model, and there is an excellent agreement between simulation and analytical results. The simulation results show that the sealing land radius, orifice size and groove width all dramatically affect the slipper behavior, and an optimum tradeoff among these factors is conducive to optimizing the pump design.
基金Project supported by the Joint Fund of the National Natural Science Foundation of China and the China Academy of Engineering Physics(Grant No.U1530261)the National Natural Science Foundation of China(Grant Nos.11402032 and 11502030)the Science Challenge Project,China(Grant No.TZ2016001)
文摘Dynamic failure and ejection characteristics of a periodic grooved Sn surface under unsupported shock loading are studied using a smoothed particle hydrodynamics method. An ＂Eiffel Tower＂ spatial structure is observed, which is com- posed of high-speed jet tip, high-density jet slug, longitudinal tensile sparse zone, and complex broken zone between grooves. It is very different from the spike-bubble structure under supported shocks, and has been validated by detonation loading experiments. In comparison with that under supported shocks at the same peak pressure, the high-speed ejecta decreases obviously, whereas the truncated location of ejecta moves towards the interior of the sample and the total mass of ejecta increases due to the vast existence of low-speed broken materials. The shock wave profile determines mainly the total ejection amount, while the variation of V-groove angle will significantly alter the distribution of middle- and high-speed ejecta, and the maximum ejecta velocity has a linear corretation with the groove angle.
文摘In order to improve the efficiency of film cooling, numerical investigation was carried out to study the effects of different film-cooled plates on surface heat transfer. Both grooved and non-grooved surfaces were concerned. The modeling was per- formed using Fluent software with the adoption of Shear-Stress Transport （SST） k-ωmodel as the turbulence closure. The coolant was supplied by a single film cooling hole with an inclination angle of 30°. The Mach numbers for the coolant flow and the mainstream flow were fixed at 0 and 0.6, respectively. At three blowing ratios of 0.5, 1.0 and 1.5, the aerodynamic behaviour of the mixing process as well as the heat transfer performance of the film cooling were presented. The numerical results were validated using experimental data extracted from a benchmark test. Good agreements between numerical results and the ex- perimental data were observed. For the film cooling efficiency, it shows that both local and laterally averaged cooling effectiveness can be improved by the non-smooth surface at different blowing ratios. Using the grooved surface, the turbulence intensity upon the plate can be reduced notably, and the mixing between the two flows is weakened due to the reduced turbu lence level. The results indicate that the cooling effectiveness of film cooling can be enhanced by applying the grooved surface.
基金This study was partially supported by the National Key Research and Development Program of China(Grant No.2018YFA0703000)the Key Research and Development Program of Zhejiang Province(Grant No.2017C01063)+2 种基金the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(Grant No.51821093)the National Natural Science Foundation of China(Grant Nos.U1609207,11672268)ZJU Scholarship for Outstanding Doctoral Candidates and Scholarship Program supported by China Scholarship Council(No.201906320187).
文摘Surface topographies such as micrometric edges and grooves have been widely used to improve neuron outgrowth.However,finding the mechanism of neuron–surface interactions on grooved substrates remains a challenge.In this work,PC12 cells and chick forebrain neurons(CFNs)were cultured on grooved and smooth polyacrylonitrile substrates.It was found that CFNs showed a tendency of growing across groove ridges;while PC12 cells were only observed to grow in the longitudinal direction of grooves.To further investigate these observations,a 3D physical model of axonal outgrowth was developed.In this model,axon shafts are simulated as elastic 3D beams,accounting for the axon outgrowth as well as the focal contacts between axons and substrates.Moreover,the bending direction of axon tips during groove ridge crossing is governed by the energy minimization principle.Our physical model predicts that axonal groove ridge crossing is contributed by the bending compliance of axons,caused by lower Young’s modulus and smaller diameters.This work will aid the understanding of the mechanisms involved in axonal alignment and elongation of neurons guided by grooved substrates,and the obtained insights can be used to enhance the design of instructive scaffolds for nerve tissue engineering and regeneration applications.
基金financially supported by the National Natural Science Foundation of China [grant number 11472053]
文摘Annular grooved projectiles(AGPs)have drawn ongoing concerns as an advanced penetrator for their excellent anti-rebound capability in impacting metal plates.They could become embedded solidly in the target surface during low-velocity impact.In this investigation,the firm embedding behavior of AGP was observed by impact experiments.Corresponding numerical simulations provided a better understanding of this process.Experimental and numerical results indicated that the firm embedding behavior of AGP was mainly due to the filling-material in the groove rather than the friction between the projectile and target,unlike traditional shape such as conical projectile.According to observation,firm embedding process can generally be subdivided into four stages:initial-cratering stage,groove-filling stage,fillingmaterial failure stage and rebound vibration stage.Moreover,the damage mechanics of target material around crater was obtained through microscopic tests.A comparison of the cross-sectional figures between the experiment and simulation proved that the analysis and the proposed method were reasonable and feasible,which further demonstrated that the firm embedding behavior has application potential in new concept warheads.
文摘Heat exchangers are integral parts of important industrial units such as petrochemicals,medicine and power plants.Due to the importance of systems energy consumption,different modifications have been applied on heat exchangers in terms of size and structure.In this study,a novel heat exchanger with helically grooved annulus shell and helically coiled tube was investigated by numerical simulation.Helically grooves with the same pitch of the helical coil tube and different depth are created on the inner and outer wall of annulus shell to improve the thermal performance of heat exchanger.In the first section,thermal performance of the shell and coil heat exchanger with the helical grooves on its outer shell wall was compared with same but without helical grooves.At the second section,helically grooves created on both outer and inner wall of the annulus shell with different groove depths.The results showed that the heat exchanger with grooves on both inner and outer shell wall has better thermal performance up to 20%compared to the heat exchanger with grooves on only outer shell wall.The highest thermal performance achieves at lower flow rates and higher groove depths whereas the pressure drop did not increase significantly.
基金Project(51076062)supported by the National Natural Science Foundation of China
文摘A mathematical model was developed to predict the maximum heat transfer capacity of high temperature heat pipe with triangular grooved wick. The effects of the inclination angle and geometry structure were considered in the proposed model.Maximum heat transfer capacity was also investigated experimentally. The model was validated by comparing with the experimental results. The maximum heat transfer capacity increases with the vapor core radius increasing. Compared with the inclination angle of0°, the maximum heat transfer capacity increases at the larger inclination angle, and the change with temperature is larger. The performance of heat pipe with triangular grooved wick is greatly influenced by gravity, so it is not recommended to be applied to the dish solar heat pipe receiver.
基金Project supported by the National Natural Science Foundation of China(Grant No.11374313)the Young Scientists Fund of the National Nature Science Foundation of China(Grant No.11504392)
文摘Kerfless technology is a promising alternative for reducing cost and providing flexible thin crystals in silicon-based semiconductors. In this work we propose a protruded seed substrate technology to prepare flexible monocrystalline Si thin film economically. Grooved seed substrate is fabricated by using SiNx thin film as a mask for the wet-etching and thermal oxidation process. After the SiNx layer on the wedged strip is removed by hot phosphoric acid, the pre-defined structured substrate is achieved with the top of the strip serving as the seed site where there is no oxide layer. And a preferred growth of epitaxial Si on the substrate is performed by introducing an intermittent feed method for silicon source gas. The technique in this paper obviously enhances the mechanical stability of the seed structure and the growth behavior on the seed sites, compared with our previous techniques, so this technique promises to be used in the industrial fabrication of flexible Si-based devices.
基金The financial support of this research is from the National Natural Science Foundation of China(NSFC)[No.11472053 and 11872121].
文摘Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance.One special ballistic performance is the embedding effect,which can achieve a delayed high-explosive reaction on the target surface.This embedding effect includes a rebound phase that is significantly different from the traditional penetration process.To better study embedment behavior,this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration.Specifically,we conducted a series of lowvelocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy.We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations.The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure,but then it increased significantlydthat is,the fluctuation of penetration resistance was affected by the irregular nose shape.Moreover,we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations.The combination of these phenomena revealed the embedment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance.The embedment was achieved primarily by the target material filled in the groove structure.Therefore,preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.
基金the National Natural Science Foundation of China(Nos.11502210 and 51279165)
文摘The motivation of this work is to investigate a grooved surface's drag reduction. The viscous flow through a two-dimensional microchannel with the grooved surface is analyzed by the lattice Boltzmann method(LBM). The effects of the grooved surface on the streamline patterns, the velocity distributions near wall region and the fluid shear stress distributions on the walls at different Reynolds numbers are studied. In addition, the influences of the groove's geometrical parameters on the grooved surface's drag reduction are discussed. The numerical results confirm the grooved surface's drag reduction and present the drag reduction law of the grooved surface.
基金Funded by the Special Prophase Project on Basic Research of The Na-tional Department of Scientific and Technology(No. 2008CB617613)the National Natural Science Foundation of China (No. 50978134)the Research Award Fund for Young Teachers of Nanjing University of Technology
文摘Selecting H-60 PVC foam, four-axis E-glass non-woven fabric and vinyl resin, a type of innovative reinforced sandwich composite as grooved perforation sandwich （GPS） were fabricated by VIMP. The interfacial structure between the face and core of the sandwich is innovative because of the acuminate grooves in both sides of foam core and the holes perforated along core’s height. The fabrication results show that VIMP is a high-speed and cost-effective manufacturing method. The mechanical properties of the reinforced foam core were tested. The typical flexural failure modes of sandwich specimens were observed. The flexural stiffness and ultimate bearing capacity of sandwich were studied by ordinary sandwich beam theory and finite element method.
文摘The denim woven by cotton and grooved polyester fiber (Coolcool) is desized by amylase and scouring enzyme. The technological parameters are discussed,such as concentrations of amylase and compound enzyme HK,time,temperature,and pH value. The technical conditions are optimized through experimental analysis. This eco-finishing process is very helpful to improve the denim production and the performance of moisture absorption and sweat transmission function.
基金Supported by the National Defense Preresearch Fund Program(No.99J8.1.1.DZD132)
文摘Grooved gate structure Metal-Oxide-Semiconductor (MOS) device is consideredas the most promising candidate used in deep and super-deep sub-micron region, for it cansuppress hot carrier effect and short channel effect deeply. Based on the hydrodynamic energytransport model, using two-dimensional device simulator Medici, the relation between structureparameters and hot carrier effect immunity for deep-sub-micron N-channel MOSFET's is studiedand compared with that of counterpart conventional planar device in this paper. The examinedstructure parameters include negative junction depth, concave corner and effective channel length.Simulation results show that grooved gate device can suppress hot carrier effect deeply even indeep sub-micron region. The studies also indicate that hot carrier effect is strongly influencedby the concave corner and channel length for grooved gate device. With the increase of concavecorner, the hot carrier effect in grooved gate MOSFET decreases sharply, and with the reducingof effective channel length, the hot carrier effect becomes large.
文摘The effects of the wavelength and orientation of machined grooves on a mold surface, casting speed, and melt superheat on the formation of surface marks on as-cast ingots were studied with an immersion casting tester and copper mold chill blocks. The mold surface topographies included a polished smooth surface, and those with machined unidirectional parallel contoured grooves oriented either parallel (vertical) or perpendicular (horizontal) to the casting direction. The unidirectional grooves were 0.232 mm deep with wavelength or spacing between 1 and 15 mm. The casting speed and melt superheat were between 1 and 200 mm/s, and 10 and 50 K, respectively. Two primary types of surface marks were observed on ingots cast with the copper mold with smooth surface topography, namely the finer and closely spaced ripples (Type I), and the widely spaced but coarser laps (Type II). The latter were more prevalent at the higher casting speeds and melt superheats. Qualitatively, formation of both types of surface marks on the as-cast ingots of the aluminum alloy 3003 appeared to be alleviated by increase in casting speed and melt superheat, and by the use of molds with grooved surface topography. In fact, casting with a mold surface with 1 mm spaced grooves that are perpendicular to the casting direction eliminated the formation of surface marks at casting speeds greater than 1 mm/s. It also improved the uniformity of the ingot subsurface microstructure and eliminated the associated subsurface segregation.
基金This project is supported by National Natural Science Foundation of China.
文摘An application of the boundary element method (BEM) is presented to calculate the behaviors of a spiral grooved thrust bearing (SGTB). The basic reason is that the SGTB has very complex boundary conditions that can hinder the effective or sufficient applications of the finite difference method (FDM) and the finite element method (FEM), despite some existing work based on the FDM and the FEM. In other to apply the BEM, the pressure control equation, i. e., Reynolds' equation, is first transformed into Laplace's and Poisson's form of the equations. Discretization of the SGTB with a set of boundary elements is thus explained in detail, which also includes the handling of boundary conditions. The Archimedean SGTB is chosen as an example of the application Of BEM, and the relationship between the behaviors and structure parameters of the bearing are found and discussed through this calculation. The obtained results lay a solid foundation for a further work of the design of the SGTB.
