Severe failures of nonstructural components have occurred during previous earthquakes.Claddings are one of the most widely used nonstructural component and are installed in many modern buildings;therefore,an evaluatio...Severe failures of nonstructural components have occurred during previous earthquakes.Claddings are one of the most widely used nonstructural component and are installed in many modern buildings;therefore,an evaluation of their seismic performance is important and cannot be ignored.To investigate the seismic performance of large-sized high performance concrete cladding(HPCC),a series of full-scale experimental tests were conducted using a unidirectional shaking table.A steel supporting frame was used to install the HPCCs and reproduce the effects of the building under earthquake.The tests were divided into two parts:in-plane(IP)testing and out-plane(OP)testing.Three recorded accelerograms,one artificial accelerogram,and one sinusoidal accelerogram were used to conduct the shaking table tests.The results show that the maximum recorded IP responses of acceleration and interstory drift ratio were 1.04 g and 1/97,while the OP responses were 1.02 g and 1/51.The HPCCs functioned well throughout the entire experimental protocol.The fundamental frequency of the HPCCs systems rarely changed after the tests.展开更多
The negative Poisson’s ratio(NPR)bolt is an innovative support element distinguished by its high strength,elongation,and a slightly negative Poisson’s ratio.Unlike conventional prestressed(PR)bolts with a positive P...The negative Poisson’s ratio(NPR)bolt is an innovative support element distinguished by its high strength,elongation,and a slightly negative Poisson’s ratio.Unlike conventional prestressed(PR)bolts with a positive Poisson’s ratio,the NPR bolt exhibits a quasi-ideal plastic response without a prominent yield platform,enabling it to sustain high prestress with a substantial safety margin,which is particularly advantageous for jointed rock masses.However,investigations into the shear resistance mechanisms of NPR bolts under varying prestress levels remain limited.This study conducted full-scale double shear tests to assess the shear strength,deformation behavior,energy absorption,and failure mechanisms of NPR bolts under different prestress conditions.To ensure a fair comparison with PR bolts,a prestress utilization coefficient(PUC)was introduced.The results reveal that at a PUC of 0.25,the NPR bolt achieved peak axial force,shear displacement,and peak shear force values that are 2.41,1.88,and 2.13 times greater than those of the PR bolt,respectively.Shear performance was optimized at a prestress level of 100 kN,with energy absorption reaching 47.1 kJ,which is 2.8 times that of the PR bolt.Furthermore,the necking ratio was significantly reduced,indicating more distributed plastic deformation and delayed failure.Field applications verified the superior performance,resulting in a 27.4%reduction in roof settlement and enhanced structural integrity.These findings confirm that NPR bolts possess excellent shear resistance,energy absorption,and deformation adaptability,and optimizing prestress significantly enhances their support performance,providing a strong basis for geotechnical engineering applications.展开更多
NOx sensors, as a core component of diesel engine exhaust treatment system, play an important role in exhaust emission control, which can accurately and quickly detect the NOx and O2 concentration. It has become a nec...NOx sensors, as a core component of diesel engine exhaust treatment system, play an important role in exhaust emission control, which can accurately and quickly detect the NOx and O2 concentration. It has become a necessary option for the detection of existing exhaust emission standards. At present, there is limited and scattered information on knowledge and test methods of NOx sensors, the research of NOx sensors has become a challenging research topic at home and abroad. Based on these requirements, the article systematically integrates the knowledge of principle and testing methods. First of all, through introducing functional description of NOx sensors and the basic principle of NOx sensors, the relevant scholars can have an overall understanding of the product and master the operation mode of products. Secondly, the current status of performance test bench and methods of NOx sensors were described, which can contribute to having a clear understanding of the development process. After that, a new structure of NOx sensors test bench was purposed, which contains six major units including standard gas source, gas mixing unit, analyzer measurement unit, sensor measurement unit, data processing and display unit, exhaust gas treatment unit. And the test bench was validated. The experimental results show that the test bench has the advantages of high-repeatability, high reliability and low cost. And it can realize automatic detection of multiple target values, which is worthy further promotion. Thereby, the article can contribute to the development of its technology indirectly.展开更多
This document presents the evaluation and the monitoring of the performances of the first grid-connected photovoltaic system installed in the Center of Studies and Researches on the Renewable Energies (CERER) inaugura...This document presents the evaluation and the monitoring of the performances of the first grid-connected photovoltaic system installed in the Center of Studies and Researches on the Renewable Energies (CERER) inaugurated on December 4th, 2012 by the governmental authorities of Senegal and Tenerife. This mini power plant of 3.15 kWc is a perfect example of the political will of the government which is to reduce the production cost of the electricity, with the diversification of the sources of production, and the greater use of the other sources such as the natural gas, the coal, the renewable energies. The evaluation of the performances of the installation is realized by using the indicators of efficiency and performance as the photovoltaic surface yield, the ratio of photovoltaic performance, the photovoltaic specific yield, and the losses of captures. The obtained results show that a big part of the energy shone during the period of observation was not able to be used further to circumstances such as the losses of conductivity, the heat losses or for example the defects on components. The analysis also shows that a large part of the produced energy is not injected because of the dilapidation of the network, the defects of landing but especially one disjunction sees frequently at the level of the point of injection.展开更多
This paper presents the outdoor performance evaluation of different grid-connected PV technologies installed in Cyprus over a two year period. The PV research and testing facility at the University of Cyprus was commi...This paper presents the outdoor performance evaluation of different grid-connected PV technologies installed in Cyprus over a two year period. The PV research and testing facility at the University of Cyprus was commissioned in 2006 to perform continuous measurements of meteorological and PV operational parameters. The test site is appropriately equipped to undertake such evaluations at a very high resolution （1 measurement per second）. The perfromance results obtained for the two year evaluation period clearly show how each PV technology has performed under the climatological conditions in Cyprus. Finally the high average energy yield of the fixed plate systems under test, 1580 kWh/kWp and 1609 kWh/kWp during the first and second year of evaluation respectively, also verifies that solar energy is a very promising renewable source of energy for countries with a high solar resource.展开更多
A heat transfer performance testing system is presented with its hardware structure, operation principle, and software control and measurement system. Working fluids of the subsystem include thermal conducting oil, co...A heat transfer performance testing system is presented with its hardware structure, operation principle, and software control and measurement system. Working fluids of the subsystem include thermal conducting oil, compressed air, glycol water solution and water as the heating fluids, and air and water as the cooling fluids. The heat transfer performance testing of heat exchangers can be conducted not only for a conventional one heating fluid to one cooling fluid, but also for a compound air cooling heat exchanger with two or three heating fluids in parallel or in series. The control and measurement system is implemented based on a LabVIEW software platform, consisting of the data acquisition and process system, and the automotive operation and control system. By using advanced measuring instruments combined with sound computer software control, the testing system has characteristics of a compact structure, high accuracy, a wide range of testing scope and a friendly operation interface. The uncertainty of the total heat transfer coefficient K is less than 5%. The testing system provides a reliable performance testing platform for designing and developing new heat exchangers.展开更多
To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the c...To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the continuous adjusting of revolution speed and load, data-acquisition and data real-time processing were adopted.Results The lubricant temperature was controlled at the set temperature ±2℃.The automatic shifting of the trans- mission is simple,reliable and accurate.The automatic adjusting of load and rotation speed is rapidandaccurate,the torque divergence is ±1N·m,the rotation speed divergence is ±5r/min Conclusion The four kinds of techniques are applied into the automobile transmission perfor- mance test stand successfully. mancetest stand successfully.展开更多
PM2.5 separator directly affects the accuracy of PM2.5 sampling.The specification testing and evaluation for PM2.5 separator is particularly important,especially under China’s wide variation of terrain and climate.In...PM2.5 separator directly affects the accuracy of PM2.5 sampling.The specification testing and evaluation for PM2.5 separator is particularly important,especially under China’s wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM2.5 separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within±1.0%in the range of-40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112)were evaluated using this system.The results showed that the 50%cutoff sizes(D50)of the three cyclones were 2.48,2.47 and 2.44μm when worked at the manufacturer’s recommended flow rates,respectively.The geometric standard deviation(GSD)of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD=1.27),while the SCC112 did not meet the relevant indicator(GSD=1.2±0.1)with a GSD=1.44.The flow rate and loading test had a great effect on D50,while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.展开更多
A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characteriz...A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characterized by scanning electron microscope,Fourier transform infrared spectra and contact angle.Cyclic voltammetry and Tafel curves have been used to study its electro-chemical performances.Two identical electrodes in sea water as the electric field sensor will swiftly respond to applied electric field which causes positive and negative ions to move in opposite direction,resulting in a electric potential difference(ΔE).Test result indicates that the offset potential is typically below 1 m V with a drift of 60-170μVd^-1.Typical self noise level is 1.07 nV√Hz^(1/2)@1 Hz.The electric field response indicates that the modified electrode pair shows better response to AC sine signal of amplitude and frequency(5 mV and 1 mHz)respectively than its blank.The electric field response model of the modified electrodes is creatively presented according to its electric double layer capacitance and Faraday pseudo-capacitance.Many advantages of the carbon fiber electric field electrode will make it have potential application prospect.展开更多
Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism.This damage mode results in poor ductility and limited energy dissipation.Continuous ...Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism.This damage mode results in poor ductility and limited energy dissipation.Continuous components offer alternatives that may avoid such failures.A novel infilled rocking wall frame system is proposed that takes advantage of continuous component and rocking characteristics.Previous studies have investigated similar systems that combine a reinforced concrete frame and a wall with rocking behavior used.However,a large-scale experimental study of a reinforced concrete frame combined with a rocking wall has not been reported.In this study,a seismic performance evaluation of the newly proposed infilled rocking wall frame structure was conducted through quasi-static cyclic testing.Critical joints were designed and verified.Numerical models were established and calibrated to estimate frame shear forces.The results evaluation demonstrate that an infilled rocking wall frame can effectively avoid soft-story mechanisms.Capacity and initial stiffness are greatly improved and self-centering behavior is achieved with the help of the infilled rocking wall.Drift distribution becomes more uniform with height.Concrete cracks and damage occurs in desired areas.The infilled rocking wall frame offers a promising approach to achieving seismic resilience.展开更多
In order to meet the demand of CubeSats for low power and high-performance micro-propulsion system,a porous ionic liquid electrospray thruster prototype is developed in this study.1010 conical emitter arrays are fabri...In order to meet the demand of CubeSats for low power and high-performance micro-propulsion system,a porous ionic liquid electrospray thruster prototype is developed in this study.1010 conical emitter arrays are fabricated on an area of 3.24 cm^(2) by computer numerical control machining technology.The propellant is 1-ethyl-3-methylimidazolium tetrafluoroborate.The over-all dimension of the assembled prototype is 3 cm×3 cm×1 cm,with a total weight of about 15 g(with propellant).The performance of this prototype is tested under vacuum.The results show that it can work in the voltage range of±2.0 kV to±3.0 kV,and the maximum emission current and input power are about 355 lA and 1.12 W.Time of Flight(TOF)mass spectrometry results show that cationic monomers and dimers dominate the beam in positive mode,while a higher proportion of higher-order solvated ion clusters in negative mode.The maximum specific impulse is 2992 s in positive mode and 849 s in negative mode.The thrust is measured in two methods:one is calculated by TOF results and the other is directly measured by high-precision torsional thrust stand.The thrust(T)obtained by these two methods conforms to a certain scaling law with respect to the emis-sion current(I_(em))and the applied voltage(V_(app)),following the scale of T-Iem_(Vapp)^(0.5),and the thrust range is from 2.1 lN to 42.6 lN.Many thruster performance parameters are significantly different in positive and negative modes.We speculate that due to the higher solvation energy of the anion,more solvated ion clusters are formed rather than pure ions under the same electric field.It may help to improve thruster performance if porous materials with smaller pore sizes are used as reservoirs.Although there are still many problems,most of the performance parameters of ILET-3 are good,which can theoretically meet the requirements of CubeSats for micro-propulsion system.展开更多
This study investigates the bond performance at the interfacial region shared by Ultra-High Performance Concrete(UHPC)and steel tubes through push-out tests.This study examines how changes in steel fiber volumetric ra...This study investigates the bond performance at the interfacial region shared by Ultra-High Performance Concrete(UHPC)and steel tubes through push-out tests.This study examines how changes in steel fiber volumetric ratio and thickness of steel tube influence the bond strength characteristics.The results show that as the enhancement of the steel tube wall thickness,the ultimate bond strength at the interface improves significantly,whereas the initial bond strength exhibits only slight variations.The influence of steel fiber volumetric ratio presents a nonlinear trend,with initial bond strength decreasing at low fiber content and increasing significantly as fiber content rises.Additionally,finite element(FE)simulations were applied to replicate the experimental conditions,and the outcomes showed strong correlation with the experimental data,confirming the exactitude of the FE model in predicting the bond behavior at the UHPC-Steel interface.These findings provide valuable insights for optimizing the design of UHPC-Filled steel tubes in high-performance structure.展开更多
Motivated by the huge practical engineering demand for the fundamental understanding of mechanical characteristics of high-speed railway infrastructure,a fullscale multi-functional test platform for high-speed railway...Motivated by the huge practical engineering demand for the fundamental understanding of mechanical characteristics of high-speed railway infrastructure,a fullscale multi-functional test platform for high-speed railway track–subgrade system is developed in this paper,and its main functions for investigating the mechanical performance of track–subgrade systems are elaborated with three typical experimental examples.Comprising the full-scale subgrade structure and all the five types of track structures adopted in Chinese high-speed railways,namely the CRTS I,the CRTS II and the CRTS III ballastless tracks,the double-block ballastless track and the ballasted track,the test platform is established strictly according to the construction standard of Chinese high-speed railways.Three kinds of effective loading methods are employed,including the real bogie loading,multi-point loading and the impact loading.Various types of sensors are adopted in different components of the five types of track–subgrade systems to measure the displacement,acceleration,pressure,structural strain and deformation,etc.Utilizing this test platform,both dynamic characteristics and long-term performance evolution of high-speed railway track–subgrade systems can be investigated,being able to satisfy the actual demand for large-scale operation of Chinese high-speed railways.As examples,three typical experimental studies are presented to elucidate the comprehensive functionalities of the full-scale multi-functional test platform for exploring the dynamic performance and its long-term evolution of ballastless track systems and for studying the long-term accumulative settlement of the ballasted track–subgrade system in high-speed railways.Some interesting phenomena and meaningful results are captured by the developed test platform,which provide a useful guidance for the scientific operation and maintenance of high-speed railway infrastructure.展开更多
"Factory physics principles" provided a method to evaluate the performance of a simple production line, whose fundamental parameters are known or given. However, it is difficult to obtain the exact and reaso..."Factory physics principles" provided a method to evaluate the performance of a simple production line, whose fundamental parameters are known or given. However, it is difficult to obtain the exact and reasonable parameters in actual manufacturing environment, especially for the complex chipset assembly & test production line(CATPL). Besides, research in this field tends to focus on evaluation and improvement of CATPL without considering performance interval and status with variability level. A developed internal benchmark method is proposed, which established three-parameter method based on the Little′s law. It integrates the variability factors, such as processing time, random failure time, and random repair time, to meet performance evaluation and improvement. A case study in a chipset assembly and test factory for the performance of CATPL is implemented. The results demonstrate the potential of the proposed method to meet performance evaluation and emphasise its relevance for practical applications.展开更多
Energy-absorbing rockbolts have been widely adopted in burst-prone excavation support, and their serviceability is closely related to the frequency and magnitude of seismic events. In this research, the splittube drop...Energy-absorbing rockbolts have been widely adopted in burst-prone excavation support, and their serviceability is closely related to the frequency and magnitude of seismic events. In this research, the splittube drop test with varying impact energy was conducted to reproduce the dynamic performance of MP1rockbolts under a wide range of seismic event magnitudes. The test results showed that the impact process could be subdivided into four distinct stages, i.e. mobilization, strain hardening, plastic flow(ductile), and rebound stage, of which strain hardening and plastic flow are the primary energy absorbing stages. As the impact energy per drop increases from 8.1 to 46.7 k J, the strain rate of the shank varies between 1.20 and 2.70 s^(-1), and the average impact load is between 240 and 270kN, which may be considered as constant. The MP1 rockbolt has a cumulative maximum energy absorption(CMEA) of 31.9–40.0 k J/m, with an average of 35.0 k J/m, and the elongation rate is 11.4%–14.7%, with an average of 12.7%, both of which are negatively correlated with the impact energy per drop. Regression analysis shows that energy absorption and shank elongation, as well as momentum input and impact duration,conform to the linear relationship. The complete dynamic capacity envelope of MP1 rockbolts is proposed, which reflects the dynamic bearing capacity, elongation, and distinct stages. This study is helpful to better understand the dynamic characteristics of energy-absorbing rockbolts and assist design engineers in robust reinforcement systems design to mitigate rockburst damage in seismically active underground excavations.展开更多
Investigation of seismic performance of buildings with STRP （scrap tire rubber pad） seismic isolators by means of pseudo-dynamic tests and numerical simulation is presented. The isolated building is numerically mode...Investigation of seismic performance of buildings with STRP （scrap tire rubber pad） seismic isolators by means of pseudo-dynamic tests and numerical simulation is presented. The isolated building is numerically modeled, while the base isolation layer is considered as the experimental substructure in the pseudo-dynamic tests. The test result verifies that the STRP isolator shows acceptable shear deformation performance predicted by the design methods, and demonstrated that seismic isolation using STRP works as a protective measure to provide enhanced seismic performance of the building indicated by the reduction of top floor absolute acceleration, drift and base shear as designated.展开更多
To improve the transmission accuracy and stiffness of the ball cycloid reducer, the authors developed a novel cycloid ball reducer, which uses a full complement ball as its gear teeth. Ceramic balls are used to get be...To improve the transmission accuracy and stiffness of the ball cycloid reducer, the authors developed a novel cycloid ball reducer, which uses a full complement ball as its gear teeth. Ceramic balls are used to get better performance in severe working conditions. A simple synthesis method was also found to determine the raceway forms and compute the contact forces among the balls and raceways. The Contact Stress Analysis (CSA) computer program was used to optimize the design of the reducer. In this paper, the following topics are covered: (1) Study of the geometry of the raceways. (2) Analyses of the principal curvature of the raceways are also accomplished. In addition, the modification of the raceway is put forward. (3) The contact forces and the reducer efficiency are evaluated. (4) Study of the performance of ceramic balls used in the CBR. A reducer using the above design technique was tested and the performances show that the reducer has high precision and rigidity. An increase of more than 50 percent transmission power was realized in the new gearing.展开更多
To study the anti-explosion protection effect of polyurea coating on reinforced concrete box girder,two segmental girder specimens were made at a scale of 1:3,numbered as G(without polyurea coating)and PCG(with polyur...To study the anti-explosion protection effect of polyurea coating on reinforced concrete box girder,two segmental girder specimens were made at a scale of 1:3,numbered as G(without polyurea coating)and PCG(with polyurea coating).The failure characteristics and dynamic responses of the specimens were compared through conducting explosion tests.The reliability of the numerical simulation using LS-DYNA software was verified by the test results.The effects of different scaled distances,reinforcement ratios,concrete strengths,coating thicknesses and ranges of polyurea were studied.The results show that the polyurea coating can effectively enhance the anti-explosion performance of the girder.The top plate of middle chamber in specimen G forms an elliptical penetrating hole,while that in specimen PCG only shows a very slight local dent.The peak vertical displacement and residual displacement of PCG decrease by 74.8% and 73.7%,respectively,compared with those of specimen G.For the TNT explosion with small equivalent,the polyurea coating has a more significant protective effect on reducing the size of fracture.With the increase of TNT equivalent,the protective effect of polyurea on reducing girder displacement becomes more significant.The optimal reinforcement ratio,concrete strength,thickness and range of polyurea coating were also drawn.展开更多
Tractor hydraulic fluids are tested to maximize their performance levels and to ensure manufacturer′s standards are met.Common tractor hydraulic fluid tests include: Gear Wear Protection,Brake Chatter Reduction,Wet-C...Tractor hydraulic fluids are tested to maximize their performance levels and to ensure manufacturer′s standards are met.Common tractor hydraulic fluid tests include: Gear Wear Protection,Brake Chatter Reduction,Wet-Clutch Capacity,and Pump Performance tests.These tests are run by Southwest Research Institute,in the U.S.A.,for tractors built by John Deere and Case-New Holland.This paper details current methods for evaluating tractor hydraulic fluids.The tests that are described utilize full size equipment and were developed by the tractor′s original equipment manufacturers(OEMs).展开更多
Background and Aim: Given the dramatic decline in the ability of test due to test anxiety, the goal of this study was to evaluate the relationship between test anxiety and academic performances in students. Materials ...Background and Aim: Given the dramatic decline in the ability of test due to test anxiety, the goal of this study was to evaluate the relationship between test anxiety and academic performances in students. Materials and Methods: This descriptive-analytical study was performed on 216 Iranian nursing and midwifery students in 2011-2012, utilizing Sarason Anxiety Inventory, demographic checklist and the average mark of students in the period of midterm and final exam. Multinomial logistic regression analyses by reporting odds ratios and their 95% confidence intervals were performed by SPSS17 software to assess the relationship between test anxiety and academic performances. Results: Mild, moderate and sever test anxiety was observed in 30.6, 43.1 and 26.4 percent of students respectively. Test anxiety was significantly related to academic performance (average), major and city. Also, there was 52.9% decrease for odds of having sever anxiety (compared to mild anxiety) with 1 point increase in average (OR = 0.471, 95% CI = (0.298 - 0.745) and p = 0.001). Conclusions: Due to inverse relationship between test anxiety and academic performance, performing preventive programs such as in time treatment of anxiety, empowering the students to deal with anxiety and conducting consulting services for how to studying are very important. Consequently it would be a big step in decreasing the test anxiety and therefore in improving the academic performance.展开更多
基金National Key R&D Program of China under Grant No.2024YFD1600404。
文摘Severe failures of nonstructural components have occurred during previous earthquakes.Claddings are one of the most widely used nonstructural component and are installed in many modern buildings;therefore,an evaluation of their seismic performance is important and cannot be ignored.To investigate the seismic performance of large-sized high performance concrete cladding(HPCC),a series of full-scale experimental tests were conducted using a unidirectional shaking table.A steel supporting frame was used to install the HPCCs and reproduce the effects of the building under earthquake.The tests were divided into two parts:in-plane(IP)testing and out-plane(OP)testing.Three recorded accelerograms,one artificial accelerogram,and one sinusoidal accelerogram were used to conduct the shaking table tests.The results show that the maximum recorded IP responses of acceleration and interstory drift ratio were 1.04 g and 1/97,while the OP responses were 1.02 g and 1/51.The HPCCs functioned well throughout the entire experimental protocol.The fundamental frequency of the HPCCs systems rarely changed after the tests.
基金supported by the State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering(Grant No.SDGZ2505)the Postdoctoral Fellowship Program of the China Postdoctoral Science Foundation(Grant No.GZB20250742)the General Program of the China Postdoctoral Science Foundation(Grant No.2025M773213).
文摘The negative Poisson’s ratio(NPR)bolt is an innovative support element distinguished by its high strength,elongation,and a slightly negative Poisson’s ratio.Unlike conventional prestressed(PR)bolts with a positive Poisson’s ratio,the NPR bolt exhibits a quasi-ideal plastic response without a prominent yield platform,enabling it to sustain high prestress with a substantial safety margin,which is particularly advantageous for jointed rock masses.However,investigations into the shear resistance mechanisms of NPR bolts under varying prestress levels remain limited.This study conducted full-scale double shear tests to assess the shear strength,deformation behavior,energy absorption,and failure mechanisms of NPR bolts under different prestress conditions.To ensure a fair comparison with PR bolts,a prestress utilization coefficient(PUC)was introduced.The results reveal that at a PUC of 0.25,the NPR bolt achieved peak axial force,shear displacement,and peak shear force values that are 2.41,1.88,and 2.13 times greater than those of the PR bolt,respectively.Shear performance was optimized at a prestress level of 100 kN,with energy absorption reaching 47.1 kJ,which is 2.8 times that of the PR bolt.Furthermore,the necking ratio was significantly reduced,indicating more distributed plastic deformation and delayed failure.Field applications verified the superior performance,resulting in a 27.4%reduction in roof settlement and enhanced structural integrity.These findings confirm that NPR bolts possess excellent shear resistance,energy absorption,and deformation adaptability,and optimizing prestress significantly enhances their support performance,providing a strong basis for geotechnical engineering applications.
文摘NOx sensors, as a core component of diesel engine exhaust treatment system, play an important role in exhaust emission control, which can accurately and quickly detect the NOx and O2 concentration. It has become a necessary option for the detection of existing exhaust emission standards. At present, there is limited and scattered information on knowledge and test methods of NOx sensors, the research of NOx sensors has become a challenging research topic at home and abroad. Based on these requirements, the article systematically integrates the knowledge of principle and testing methods. First of all, through introducing functional description of NOx sensors and the basic principle of NOx sensors, the relevant scholars can have an overall understanding of the product and master the operation mode of products. Secondly, the current status of performance test bench and methods of NOx sensors were described, which can contribute to having a clear understanding of the development process. After that, a new structure of NOx sensors test bench was purposed, which contains six major units including standard gas source, gas mixing unit, analyzer measurement unit, sensor measurement unit, data processing and display unit, exhaust gas treatment unit. And the test bench was validated. The experimental results show that the test bench has the advantages of high-repeatability, high reliability and low cost. And it can realize automatic detection of multiple target values, which is worthy further promotion. Thereby, the article can contribute to the development of its technology indirectly.
文摘This document presents the evaluation and the monitoring of the performances of the first grid-connected photovoltaic system installed in the Center of Studies and Researches on the Renewable Energies (CERER) inaugurated on December 4th, 2012 by the governmental authorities of Senegal and Tenerife. This mini power plant of 3.15 kWc is a perfect example of the political will of the government which is to reduce the production cost of the electricity, with the diversification of the sources of production, and the greater use of the other sources such as the natural gas, the coal, the renewable energies. The evaluation of the performances of the installation is realized by using the indicators of efficiency and performance as the photovoltaic surface yield, the ratio of photovoltaic performance, the photovoltaic specific yield, and the losses of captures. The obtained results show that a big part of the energy shone during the period of observation was not able to be used further to circumstances such as the losses of conductivity, the heat losses or for example the defects on components. The analysis also shows that a large part of the produced energy is not injected because of the dilapidation of the network, the defects of landing but especially one disjunction sees frequently at the level of the point of injection.
文摘This paper presents the outdoor performance evaluation of different grid-connected PV technologies installed in Cyprus over a two year period. The PV research and testing facility at the University of Cyprus was commissioned in 2006 to perform continuous measurements of meteorological and PV operational parameters. The test site is appropriately equipped to undertake such evaluations at a very high resolution （1 measurement per second）. The perfromance results obtained for the two year evaluation period clearly show how each PV technology has performed under the climatological conditions in Cyprus. Finally the high average energy yield of the fixed plate systems under test, 1580 kWh/kWp and 1609 kWh/kWp during the first and second year of evaluation respectively, also verifies that solar energy is a very promising renewable source of energy for countries with a high solar resource.
基金The National Natural Science Foundation of China(No. 50976022)
文摘A heat transfer performance testing system is presented with its hardware structure, operation principle, and software control and measurement system. Working fluids of the subsystem include thermal conducting oil, compressed air, glycol water solution and water as the heating fluids, and air and water as the cooling fluids. The heat transfer performance testing of heat exchangers can be conducted not only for a conventional one heating fluid to one cooling fluid, but also for a compound air cooling heat exchanger with two or three heating fluids in parallel or in series. The control and measurement system is implemented based on a LabVIEW software platform, consisting of the data acquisition and process system, and the automotive operation and control system. By using advanced measuring instruments combined with sound computer software control, the testing system has characteristics of a compact structure, high accuracy, a wide range of testing scope and a friendly operation interface. The uncertainty of the total heat transfer coefficient K is less than 5%. The testing system provides a reliable performance testing platform for designing and developing new heat exchangers.
文摘To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the continuous adjusting of revolution speed and load, data-acquisition and data real-time processing were adopted.Results The lubricant temperature was controlled at the set temperature ±2℃.The automatic shifting of the trans- mission is simple,reliable and accurate.The automatic adjusting of load and rotation speed is rapidandaccurate,the torque divergence is ±1N·m,the rotation speed divergence is ±5r/min Conclusion The four kinds of techniques are applied into the automobile transmission perfor- mance test stand successfully. mancetest stand successfully.
基金supported by the National Key Research and Development Program of China(Nos.2016YFF0103004 and 2017YFC0209504)the National Natural Science Foundation of China(No.91544218)+1 种基金the Science and Technological Fund of Anhui Province for Outstanding Youth(No.1808085J19)the Special Research of Public Welfare Industry of Environmental Protection(201409011)
文摘PM2.5 separator directly affects the accuracy of PM2.5 sampling.The specification testing and evaluation for PM2.5 separator is particularly important,especially under China’s wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM2.5 separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within±1.0%in the range of-40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112)were evaluated using this system.The results showed that the 50%cutoff sizes(D50)of the three cyclones were 2.48,2.47 and 2.44μm when worked at the manufacturer’s recommended flow rates,respectively.The geometric standard deviation(GSD)of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD=1.27),while the SCC112 did not meet the relevant indicator(GSD=1.2±0.1)with a GSD=1.44.The flow rate and loading test had a great effect on D50,while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.
基金supported by the National Defense Science and Technology Innovation Zone Project(No.18-H863-05-ZT-001-018-09)
文摘A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characterized by scanning electron microscope,Fourier transform infrared spectra and contact angle.Cyclic voltammetry and Tafel curves have been used to study its electro-chemical performances.Two identical electrodes in sea water as the electric field sensor will swiftly respond to applied electric field which causes positive and negative ions to move in opposite direction,resulting in a electric potential difference(ΔE).Test result indicates that the offset potential is typically below 1 m V with a drift of 60-170μVd^-1.Typical self noise level is 1.07 nV√Hz^(1/2)@1 Hz.The electric field response indicates that the modified electrode pair shows better response to AC sine signal of amplitude and frequency(5 mV and 1 mHz)respectively than its blank.The electric field response model of the modified electrodes is creatively presented according to its electric double layer capacitance and Faraday pseudo-capacitance.Many advantages of the carbon fiber electric field electrode will make it have potential application prospect.
基金Natural Science Foundation of China under Grant Nos.51178342 and 51578314
文摘Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism.This damage mode results in poor ductility and limited energy dissipation.Continuous components offer alternatives that may avoid such failures.A novel infilled rocking wall frame system is proposed that takes advantage of continuous component and rocking characteristics.Previous studies have investigated similar systems that combine a reinforced concrete frame and a wall with rocking behavior used.However,a large-scale experimental study of a reinforced concrete frame combined with a rocking wall has not been reported.In this study,a seismic performance evaluation of the newly proposed infilled rocking wall frame structure was conducted through quasi-static cyclic testing.Critical joints were designed and verified.Numerical models were established and calibrated to estimate frame shear forces.The results evaluation demonstrate that an infilled rocking wall frame can effectively avoid soft-story mechanisms.Capacity and initial stiffness are greatly improved and self-centering behavior is achieved with the help of the infilled rocking wall.Drift distribution becomes more uniform with height.Concrete cracks and damage occurs in desired areas.The infilled rocking wall frame offers a promising approach to achieving seismic resilience.
基金supported by the National Key R&D Program of China(No.2020YFC2201103).
文摘In order to meet the demand of CubeSats for low power and high-performance micro-propulsion system,a porous ionic liquid electrospray thruster prototype is developed in this study.1010 conical emitter arrays are fabricated on an area of 3.24 cm^(2) by computer numerical control machining technology.The propellant is 1-ethyl-3-methylimidazolium tetrafluoroborate.The over-all dimension of the assembled prototype is 3 cm×3 cm×1 cm,with a total weight of about 15 g(with propellant).The performance of this prototype is tested under vacuum.The results show that it can work in the voltage range of±2.0 kV to±3.0 kV,and the maximum emission current and input power are about 355 lA and 1.12 W.Time of Flight(TOF)mass spectrometry results show that cationic monomers and dimers dominate the beam in positive mode,while a higher proportion of higher-order solvated ion clusters in negative mode.The maximum specific impulse is 2992 s in positive mode and 849 s in negative mode.The thrust is measured in two methods:one is calculated by TOF results and the other is directly measured by high-precision torsional thrust stand.The thrust(T)obtained by these two methods conforms to a certain scaling law with respect to the emis-sion current(I_(em))and the applied voltage(V_(app)),following the scale of T-Iem_(Vapp)^(0.5),and the thrust range is from 2.1 lN to 42.6 lN.Many thruster performance parameters are significantly different in positive and negative modes.We speculate that due to the higher solvation energy of the anion,more solvated ion clusters are formed rather than pure ions under the same electric field.It may help to improve thruster performance if porous materials with smaller pore sizes are used as reservoirs.Although there are still many problems,most of the performance parameters of ILET-3 are good,which can theoretically meet the requirements of CubeSats for micro-propulsion system.
基金supported by grants from the Natural Science Foundation of Fujian Province(2021J011062)Minjiang Scholars Funding(GY-633Z21067).
文摘This study investigates the bond performance at the interfacial region shared by Ultra-High Performance Concrete(UHPC)and steel tubes through push-out tests.This study examines how changes in steel fiber volumetric ratio and thickness of steel tube influence the bond strength characteristics.The results show that as the enhancement of the steel tube wall thickness,the ultimate bond strength at the interface improves significantly,whereas the initial bond strength exhibits only slight variations.The influence of steel fiber volumetric ratio presents a nonlinear trend,with initial bond strength decreasing at low fiber content and increasing significantly as fiber content rises.Additionally,finite element(FE)simulations were applied to replicate the experimental conditions,and the outcomes showed strong correlation with the experimental data,confirming the exactitude of the FE model in predicting the bond behavior at the UHPC-Steel interface.These findings provide valuable insights for optimizing the design of UHPC-Filled steel tubes in high-performance structure.
基金This work was supported by the National Natural Science Foundation of China[Grant Nos.11790283,51978587,51708457]the Program of Introducing Talents of Discipline to Universities(111 Project)[Grant No.B16041].
文摘Motivated by the huge practical engineering demand for the fundamental understanding of mechanical characteristics of high-speed railway infrastructure,a fullscale multi-functional test platform for high-speed railway track–subgrade system is developed in this paper,and its main functions for investigating the mechanical performance of track–subgrade systems are elaborated with three typical experimental examples.Comprising the full-scale subgrade structure and all the five types of track structures adopted in Chinese high-speed railways,namely the CRTS I,the CRTS II and the CRTS III ballastless tracks,the double-block ballastless track and the ballasted track,the test platform is established strictly according to the construction standard of Chinese high-speed railways.Three kinds of effective loading methods are employed,including the real bogie loading,multi-point loading and the impact loading.Various types of sensors are adopted in different components of the five types of track–subgrade systems to measure the displacement,acceleration,pressure,structural strain and deformation,etc.Utilizing this test platform,both dynamic characteristics and long-term performance evolution of high-speed railway track–subgrade systems can be investigated,being able to satisfy the actual demand for large-scale operation of Chinese high-speed railways.As examples,three typical experimental studies are presented to elucidate the comprehensive functionalities of the full-scale multi-functional test platform for exploring the dynamic performance and its long-term evolution of ballastless track systems and for studying the long-term accumulative settlement of the ballasted track–subgrade system in high-speed railways.Some interesting phenomena and meaningful results are captured by the developed test platform,which provide a useful guidance for the scientific operation and maintenance of high-speed railway infrastructure.
基金supported by National Natural Science Foundation of China (No. 71671026)Sichuan Science and Technology Program (Nos. 2018GZ0306 and 2017GZ0034)
文摘"Factory physics principles" provided a method to evaluate the performance of a simple production line, whose fundamental parameters are known or given. However, it is difficult to obtain the exact and reasonable parameters in actual manufacturing environment, especially for the complex chipset assembly & test production line(CATPL). Besides, research in this field tends to focus on evaluation and improvement of CATPL without considering performance interval and status with variability level. A developed internal benchmark method is proposed, which established three-parameter method based on the Little′s law. It integrates the variability factors, such as processing time, random failure time, and random repair time, to meet performance evaluation and improvement. A case study in a chipset assembly and test factory for the performance of CATPL is implemented. The results demonstrate the potential of the proposed method to meet performance evaluation and emphasise its relevance for practical applications.
基金CCTEG Coal Mining Research Institute(No.TDKC-2022-MS-01)the National Natural Science Foundation of China(No.52274123)the Mining Education Australia(MEA),Collaborative Research Grant Scheme(No.RS-59041).
文摘Energy-absorbing rockbolts have been widely adopted in burst-prone excavation support, and their serviceability is closely related to the frequency and magnitude of seismic events. In this research, the splittube drop test with varying impact energy was conducted to reproduce the dynamic performance of MP1rockbolts under a wide range of seismic event magnitudes. The test results showed that the impact process could be subdivided into four distinct stages, i.e. mobilization, strain hardening, plastic flow(ductile), and rebound stage, of which strain hardening and plastic flow are the primary energy absorbing stages. As the impact energy per drop increases from 8.1 to 46.7 k J, the strain rate of the shank varies between 1.20 and 2.70 s^(-1), and the average impact load is between 240 and 270kN, which may be considered as constant. The MP1 rockbolt has a cumulative maximum energy absorption(CMEA) of 31.9–40.0 k J/m, with an average of 35.0 k J/m, and the elongation rate is 11.4%–14.7%, with an average of 12.7%, both of which are negatively correlated with the impact energy per drop. Regression analysis shows that energy absorption and shank elongation, as well as momentum input and impact duration,conform to the linear relationship. The complete dynamic capacity envelope of MP1 rockbolts is proposed, which reflects the dynamic bearing capacity, elongation, and distinct stages. This study is helpful to better understand the dynamic characteristics of energy-absorbing rockbolts and assist design engineers in robust reinforcement systems design to mitigate rockburst damage in seismically active underground excavations.
文摘Investigation of seismic performance of buildings with STRP （scrap tire rubber pad） seismic isolators by means of pseudo-dynamic tests and numerical simulation is presented. The isolated building is numerically modeled, while the base isolation layer is considered as the experimental substructure in the pseudo-dynamic tests. The test result verifies that the STRP isolator shows acceptable shear deformation performance predicted by the design methods, and demonstrated that seismic isolation using STRP works as a protective measure to provide enhanced seismic performance of the building indicated by the reduction of top floor absolute acceleration, drift and base shear as designated.
文摘To improve the transmission accuracy and stiffness of the ball cycloid reducer, the authors developed a novel cycloid ball reducer, which uses a full complement ball as its gear teeth. Ceramic balls are used to get better performance in severe working conditions. A simple synthesis method was also found to determine the raceway forms and compute the contact forces among the balls and raceways. The Contact Stress Analysis (CSA) computer program was used to optimize the design of the reducer. In this paper, the following topics are covered: (1) Study of the geometry of the raceways. (2) Analyses of the principal curvature of the raceways are also accomplished. In addition, the modification of the raceway is put forward. (3) The contact forces and the reducer efficiency are evaluated. (4) Study of the performance of ceramic balls used in the CBR. A reducer using the above design technique was tested and the performances show that the reducer has high precision and rigidity. An increase of more than 50 percent transmission power was realized in the new gearing.
基金the Natural Science Foundation of Jiangsu Province(Grant No.BK20200494)China Postdoctoral Science Foundation(Grant No.2021M701725)+3 种基金Jiangsu Postdoctoral Research Funding Program(Grant No.2021K522C)Fundamental Research Funds for the Central Universities(Grant No.30919011246)National Natural Science Foundation of China(Grant No.52278188)Natural Science Foundation of Jiangsu Province(Grant No.BK20211196)。
文摘To study the anti-explosion protection effect of polyurea coating on reinforced concrete box girder,two segmental girder specimens were made at a scale of 1:3,numbered as G(without polyurea coating)and PCG(with polyurea coating).The failure characteristics and dynamic responses of the specimens were compared through conducting explosion tests.The reliability of the numerical simulation using LS-DYNA software was verified by the test results.The effects of different scaled distances,reinforcement ratios,concrete strengths,coating thicknesses and ranges of polyurea were studied.The results show that the polyurea coating can effectively enhance the anti-explosion performance of the girder.The top plate of middle chamber in specimen G forms an elliptical penetrating hole,while that in specimen PCG only shows a very slight local dent.The peak vertical displacement and residual displacement of PCG decrease by 74.8% and 73.7%,respectively,compared with those of specimen G.For the TNT explosion with small equivalent,the polyurea coating has a more significant protective effect on reducing the size of fracture.With the increase of TNT equivalent,the protective effect of polyurea on reducing girder displacement becomes more significant.The optimal reinforcement ratio,concrete strength,thickness and range of polyurea coating were also drawn.
文摘Tractor hydraulic fluids are tested to maximize their performance levels and to ensure manufacturer′s standards are met.Common tractor hydraulic fluid tests include: Gear Wear Protection,Brake Chatter Reduction,Wet-Clutch Capacity,and Pump Performance tests.These tests are run by Southwest Research Institute,in the U.S.A.,for tractors built by John Deere and Case-New Holland.This paper details current methods for evaluating tractor hydraulic fluids.The tests that are described utilize full size equipment and were developed by the tractor′s original equipment manufacturers(OEMs).
文摘Background and Aim: Given the dramatic decline in the ability of test due to test anxiety, the goal of this study was to evaluate the relationship between test anxiety and academic performances in students. Materials and Methods: This descriptive-analytical study was performed on 216 Iranian nursing and midwifery students in 2011-2012, utilizing Sarason Anxiety Inventory, demographic checklist and the average mark of students in the period of midterm and final exam. Multinomial logistic regression analyses by reporting odds ratios and their 95% confidence intervals were performed by SPSS17 software to assess the relationship between test anxiety and academic performances. Results: Mild, moderate and sever test anxiety was observed in 30.6, 43.1 and 26.4 percent of students respectively. Test anxiety was significantly related to academic performance (average), major and city. Also, there was 52.9% decrease for odds of having sever anxiety (compared to mild anxiety) with 1 point increase in average (OR = 0.471, 95% CI = (0.298 - 0.745) and p = 0.001). Conclusions: Due to inverse relationship between test anxiety and academic performance, performing preventive programs such as in time treatment of anxiety, empowering the students to deal with anxiety and conducting consulting services for how to studying are very important. Consequently it would be a big step in decreasing the test anxiety and therefore in improving the academic performance.
