Digital ElevationModel(DEM)refers to a digital map of the surface of the Earth that only shows the bare ground,without any buildings,plants,or other characteristics.However,obtaining unlimited access to DEM data at hi...Digital ElevationModel(DEM)refers to a digital map of the surface of the Earth that only shows the bare ground,without any buildings,plants,or other characteristics.However,obtaining unlimited access to DEM data at high and medium resolutions is very hard.Consequently,users often question the accuracy of freely available DEMs and their suitability for various applications.By comparing them to Global Positioning System(GPS)elevation data,this study aimed to identify themost reliable and widely available DEM for various terrains.The objectives of this study were to generate DEMs fromdifferent open sources and validate the accuracy of these DEMs using GPS elevation data.Various DEM types including Sentinel-1,ALOS PALSAR,SRTM,AW3D30,and ASTER were compared.Root Mean Square Error(RMSE)andMean Error(ME)were used to measure the difference between the DEM-derived elevations and the GPS-measured elevations.The results showed that even though Sentinel-1 has higher resolutions,the accuracy of the DEM from Sentinel-1 depends on issues including coherence and interferometry,surface features,and temporal stability.On the other hand,ALOS PALSAR could accurately represent surfaces in some situations.Additionally,DEMs with lower resolutions,such as SRTM and AW3D30,demonstrated greater consistency across various types of terrain.In contrast,the ASTER DEM showed more variability in complex terrains.While freely available DEMs are easy to use and accessible,their accuracy varies depending on the source and terrain features.Future improvements could include adding more ground control points and using advanced filtering methods to enhance precision.展开更多
Digital elevation modeling(DEM)是基础地理数据之一,从其中可以提取多种地形参数,DEM不确定性对提取的地形参数具有一定的影响.选择坡度、上坡集水面积和地形指数作为研究对象,在DEM不确定性模拟的基础上,研究DEM不确定性对地形参数...Digital elevation modeling(DEM)是基础地理数据之一,从其中可以提取多种地形参数,DEM不确定性对提取的地形参数具有一定的影响.选择坡度、上坡集水面积和地形指数作为研究对象,在DEM不确定性模拟的基础上,研究DEM不确定性对地形参数影响的空间分布特征.研究发现:DEM不确定性对坡度的影响没有明显的空间分布特征,对上坡集水面积和地形指数具有明显的空间分布特征.DEM不确定性对上坡集水面积影响的空间分布特征为:总体上分布均匀,在河道及附近、水库区域影响大于其它地区;DEM不确定性对地形指数影响的空间分布特征为:总体上分布均匀,在河道及附近、水库、平地地区影响大于其它地区.不同DEM不确定性程度对地形参数影响的空间分布特征相似.展开更多
Boundary extraction of watershed is an important step in forest landscape research. The boundary of the upriver wa-tershed of the Hunhe River in the sub-alpine Qingyuan County of eastern Liaoning Province, China was e...Boundary extraction of watershed is an important step in forest landscape research. The boundary of the upriver wa-tershed of the Hunhe River in the sub-alpine Qingyuan County of eastern Liaoning Province, China was extracted by digital elevation modeling (DEM) data in ArcInfo8.1. Remote sensing image of the corresponding region was applied to help modify its copy according to Enhanced Thematic Mapper (ETM) image抯 profuse geomorphological structure information. Both the DEM-dependent boundary and modified copy were overlapped with county map and drainage network map to visually check the effects of result. Overlap of county map suggested a nice extraction of the boundary line since the two layers matched precisely, which indicated the DEM-dependent boundary by program was effective and precise. Further upload of drainage network showed discrepancies between the boundary and the drainage network. Altogether, there were three sections of the extraction result that needed to correct. Compared with this extraction boundary, the modified boundary had a better match to the drainage network as well as to the county map. Comprehensive analysis demonstrated that the program extraction has generally fine precision in position and excels the digitized result by hand. The errors of the DEM-dependant extraction are due to the fact that it is difficult for program to recognize sections of complex landform especially altered by human activities, but these errors are discernable and adjustable because the spatial resolution of ETM image is less than that of DEM. This study result proved that application of remote sensing information could help obtain better result when DEM method is used in extraction of watershed boundary.展开更多
Topographic shielding(TS) is an important factor in cosmogenic nuclide surface exposure dating. The development of geographic information systems(GIS) and the availability of digital elevation models(DEMs) make it pos...Topographic shielding(TS) is an important factor in cosmogenic nuclide surface exposure dating. The development of geographic information systems(GIS) and the availability of digital elevation models(DEMs) make it possible to derive this factor directly from a DEM. Most available GIS models derive the TS factors for an area(all cells in a DEM) without the consideration of surface conditions of individual sites, such as the strike, dip,and height above ground, into the calculation. This paper presents a new GIS model to derive the TS factors for discrete sample sites. This model uses the Skyline and Skyline Graph functions in ArcGIS to extract the set of azimuth and elevation angles of topographic obstructions around each site from a DEM(considering the sample height above ground)and then incorporates the strike and dip information of the sample surface to derive the TS factor. All processing tools and steps are streamlined in ArcGIS modelbuilder and this model can be run like a standard ArcGIS geoprocessing tool. It provides an easy and user-friendly means to derive the TS factors for discrete samples based on a DEM and the measured strike, dip and sample height for each site.展开更多
In China′s Loess Plateau area, gully head is the most active zone of a drainage system in gully areas. The differentiation of loess gully head follows geospatial patterns and reflects the process of the loess landfor...In China′s Loess Plateau area, gully head is the most active zone of a drainage system in gully areas. The differentiation of loess gully head follows geospatial patterns and reflects the process of the loess landform development and evolution of its drainage system to some extent. In this study, the geomorphic meaning, basic characteristics, morphological structure and the basic types of loess gully heads were systematically analysed. Then, the loess gully head′s conceptual model was established, and an extraction method based on Digital Elevation Model(DEM) for loess gully head features and elements was proposed. Through analysing the achieved statistics of loess gully head features, loess gully heads have apparently similar and different characteristics depending on the different loess landforms where they are found. The loess head characteristics reflect their growth period and evolution tendency to a certain degree, and they indirectly represent evolutionary mechanisms. In addition, the loess gully developmental stages and the evolutionary processes can be deduced by using loess gully head characteristics. This study is of great significance for development and improvement of the theoretical system for describing loess gully landforms.展开更多
Topographic shielding of cosmic radiation flux is a key parameter in using cosmogenic nuclides to determine surface exposure ages or erosion rates. Traditionally, this parameter is measured in the field and uncertaint...Topographic shielding of cosmic radiation flux is a key parameter in using cosmogenic nuclides to determine surface exposure ages or erosion rates. Traditionally, this parameter is measured in the field and uncertainty and/or inconsistency may exist among different investigators. This paper provides an ArcGIS python code to determine topographic shielding factors using digital elevation models （DEMs）. This code can be imported into ArcGIS as a geoprocessing tool with a user-friendly graphical interface. The DEM-derived parameters using this method were validated with field measurements in central Tian Shan. Results indicate that DEM-derived shielding factors are consistent with field-measured values. It provides a valuable tool to save fieldwork efforts and has the potential to provide consistent results for different regions in the world to facilitate the comparison of cosmogenie nuclide results.展开更多
Tropical mountainous areas not only provide substantial carbon storage and play an important role in global biological diversity, but also provide basic livelihood for a large number of poor ethnic minorities. However...Tropical mountainous areas not only provide substantial carbon storage and play an important role in global biological diversity, but also provide basic livelihood for a large number of poor ethnic minorities. However, there is no unified and explicit definition for mountainous areas. The local elevation range(LER) is a crucial structural parameter for delineating mountainous areas. However, current LER products are limited by the subjective selection of an optimum statistical window or coarser spatial resolution of topographical data. In this study, we presented an approach using thresholds for three topographic parameters, elevation, slope, and LER, derived from the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model(ASTER GDEM) to redelineate the vast mountainous areas of mainland Southeast Asia(MSEA). The mean change-point analysis method was applied to determine the optimum statistical window of the 1 arc second(approximately 30 m)-resolution GDEM LER. The results showed that: First, the optimum statistical window is 38 × 38 cell units(width × height) in a rectangular neighborhood, or an area of about 1.30 km^2 for calculating GDEM LER in MSEA. Second, the LER of more than 80% of the area ranges from 30 m to 499 m in MSEA. The LERs in the northern and northwestern MSEA are greater than their counterparts in the south and east. Third, the area of the re-delineated mountainous areas was 83.52 × 10~4 km^2, about 38.71% of the total area. Spatially, the mountainous areas are mainly distributed in the north and northeast of MSEA. The re-delineated 30-m resolution map of the mountainous areas will serve as a topographical dataset for monitoring mountainrelated land surface changes in MSEA. The parameter-modified mountain extraction procedure can be expanded to delineate global mountainous areas.展开更多
A new algorithm to automatically extract drainage networks and catchments based on triangulation irregular networks(TINs) digital elevation model(DEM) was developed. The flow direction in this approach is determined b...A new algorithm to automatically extract drainage networks and catchments based on triangulation irregular networks(TINs) digital elevation model(DEM) was developed. The flow direction in this approach is determined by computing the spatial gradient of triangle and triangle edges. Outflow edge was defined by comparing the contribution area that is separated by the steepest descent of the triangle. Local channels were then tracked to build drainage networks. Both triangle edges and facets were considered to construct flow path. The algorithm has been tested in the site for Hawaiian Island of Kaho'olawe, and the results were compared with those calculated by ARCGIS as well as terrain map. The reported algorithm has been proved to be a reliable approach with high efficiency to generate well-connected and coherent drainage networks.展开更多
Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes.Differential interferometric synthetic aperture radar(DInSAR),mounted on an artificial satellite,has the ...Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes.Differential interferometric synthetic aperture radar(DInSAR),mounted on an artificial satellite,has the potential to be a cost-effective method for monitoring surface displacements over extensive areas,such as open-pit mines.DInSAR requires the ground surface elevation data in the process of its analysis as a digital elevation model(DEM).However,since the topography of the ground surface in open-pit mines changes largely due to excavations,measurement errors can occur due to insufficient information on the elevation of mining areas.In this paper,effect of different elevation models on the accuracy of the displacement monitoring results by DInSAR is investigated at a limestone quarry.In addition,validity of the DInSAR results using an appropriate DEM is examined by comparing them with the results obtained by global positioning system(GPS)monitoring conducted for three years at the same limestone quarry.It is found that the uncertainty of DEMs induces large errors in the displacement monitoring results if the baseline length of the satellites between the master and the slave data is longer than a few hundred meters.Comparing the monitoring results of DInSAR and GPS,the root mean square error(RMSE)of the discrepancy between the two sets of results is less than 10 mm if an appropriate DEM,considering the excavation processes,is used.It is proven that DInSAR can be applied for monitoring the displacements of mine slopes with centimeter-level accuracy.展开更多
To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communitie...To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communities. We tested the effectiveness of simply identifying debris-flow hazards through automated derivation of surface curvatures using LiDAR digital elevation models. We achieved useful correspondence between plan curvatures and areas of existing debris-flow damage in two localities in Japan using the analysis of digital elevation models(DEMs). We found that plan curvatures derived from 10 m DEMs may be useful to indicate areas that are susceptible to debris flow in mountainous areas. In residential areas located on gentle sloping debris flow fans, the greatest damage to houses was found to be located in the elongated depressions that are connected to mountain stream valleys. Plan curvaturederived from 5 m DEM was the most sensitive indicators for susceptibility to debris flows.展开更多
In China, many scenic and tourism areas are suffering from the urbanization that results from physical development of tourism projects, leading to the removal of the vegetative cover, the creation of areas impermeable...In China, many scenic and tourism areas are suffering from the urbanization that results from physical development of tourism projects, leading to the removal of the vegetative cover, the creation of areas impermeable to water, in-stream modifications, and other problems. In this paper, the risk of soil erosion and its ecological risks in the West Lake Scenic Spots （WLSS） area were quantitatively evaluated by integrating the revised universal soil loss equation （RUSLE） with a digital elevation model （DEM） and geographical information system （GIS） software. The standard RUSLE factors were modified to account for local climatic and topographic characteristics reflected in the DEM maps, and for the soil types and vegetation cover types. An interface was created between the Areinfo software and RUSLE so that the level of soil erosion and its ecological risk in the WLSS area could be mapped immediately once the model factors were defined for the area. The results from an analysis using the Areinfo-RUSLE interface showed that the risk value in 93 % of the expanding western part of the WLSS area was moderate or more severe and the soil erosion risk in this area was thus large compared with that in the rest of the area. This paper mainly aimed to increase the awareness of the soil erosion risk in urbanizing areas and suggest that the local governments should consider the probable ecological risk resulting from soil erosion when enlarging and developing tourism areas.展开更多
Although many studies have investigated slope gradient uncertainty derived from Digital Elevation Models(DEMs), the research concerning slope length uncertainty is far from mature. This discrepancy affects the availab...Although many studies have investigated slope gradient uncertainty derived from Digital Elevation Models(DEMs), the research concerning slope length uncertainty is far from mature. This discrepancy affects the availability and accuracy of soil erosion as well as hydrological modeling. This study investigates the formation and distribution of existing errors and uncertainties in slope length derivation based on 5-m resolution DEMs of the Loess Plateau in the middle of China. The slope length accuracy in three different landform areas is examined to analyse algorithm effects. The experiments indicate that the accuracy of the flat test area is lower than that of the rougher areas. The value from the specific contributing area(SCA) method is greater than the cumulative slope length(CSL), and the differences between these two methods arise from the shape of the upslope area. The variation of mean slope length derived from various DEM resolutions and landforms. The slope length accuracy decreases with increasing grid size and terrain complexity at the six test sites. A regression model is built to express the relationship of mean slope length with DEM resolution less than 85 m and terrain complexity represented by gully density. The results support the understanding of the slope length accuracy, thereby aiding in the effective evaluation of the modeling effect of surface process.展开更多
This paper investigates the differences that result from applying different approaches to uncertainty modeling and reports an experimental examining error estimation and propagation in elevation and slope, with the la...This paper investigates the differences that result from applying different approaches to uncertainty modeling and reports an experimental examining error estimation and propagation in elevation and slope, with the latter derived from the former. It is confirmed that significant differences exist between uncertainty descriptors, and propagation of uncertainty to end products is immensely affected by the specification of source uncertainty.展开更多
Researchers in P.R.China commonly create triangulate irregular networks(TINs) from contours and then convert TINs into digital elevation models(DEMs).However,the DEM produced by this method can not precisely describe ...Researchers in P.R.China commonly create triangulate irregular networks(TINs) from contours and then convert TINs into digital elevation models(DEMs).However,the DEM produced by this method can not precisely describe and simulate key hydrological features such as rivers and drainage borders.Taking a hilly region in southwestern China as a research area and using ArcGISTM software,we analyzed the errors of different interpolations to obtain distributions of the errors and precisions of different algorithms and to provide references for DEM productions.The results show that different interpolation errors satisfy normal distributions,and large error exists near the structure line of the terrain.Furthermore,the results also show that the precision of a DEM interpolated with the Australian National University digital elevation model(ANUDEM) is higher than that interpolated with TIN.The DEM interpolated with TIN is acceptable for generating DEMs in the hilly region of southwestern China.展开更多
The morphological and volumetric changes of a sandy beach were investigated through a series of two- monthly filed surveys carried out aver a 2-year period from April 2005 to January 2007. This paper discuss the abili...The morphological and volumetric changes of a sandy beach were investigated through a series of two- monthly filed surveys carried out aver a 2-year period from April 2005 to January 2007. This paper discuss the ability of 3-D digital elevation models (DEMs) derived from high accurate data to assess and quantify beach morphodynamics in relation with wave forcing. The methodology and data acquisition are described and consist mainly in the production of interpolated DEMs from which a variety of representations can be made, including as elevation change maps, two-dimensional cross-sections of the beach, calculation of net volume. The results of the analysis highlight seasonal changes in beach morphology due to variations in wave energy. This behavior is characterized by beach erosion and bar decay under high-energy waves and net accretion and bar formation during relatively fair weather conditions. The sand budgets adjustments show that the loss of volume in the winter months is compensated for by accumulation to the beach during summer. This trend suggests that there is a mechanism which controls the beach evolution. The correlation between beach changes and wave energy variations highlights a net relation between them. The results from this in- vestigation state the value of DEMs utilized and demonstrate the efficiency of the 3-D approach employed here to assess the erosion and accretion patterns which would not be visualized using 2-D profiles.展开更多
Validation studies of global Digital Elevation Models(DEMs)in the existing literature are limited by the diversity and spread of landscapes,terrain types considered and sparseness of groundtruth.Moreover,there are kno...Validation studies of global Digital Elevation Models(DEMs)in the existing literature are limited by the diversity and spread of landscapes,terrain types considered and sparseness of groundtruth.Moreover,there are knowledge gaps on the accuracy variations in rugged and complex landscapes,and previous studies have often not relied on robust internal and external validation measures.Thus,there is still only partial understanding and limited perspective of the reliability and adequacy of global DEMs for several applications.In this study,we utilize a dense spread of LiDAR groundtruth to assess the vertical accuracies of four medium-resolution,readily available,free-access and global coverage 1 arc-second(30 m)DEMs:NASADEM,ASTER GDEM,Copernicus GLO-30,and ALOS World 3D(AW3D).The assessment is carried out at landscapes spread across Cape Town,Southern Africa(urban/industrial,agricultural,mountain,peninsula and grassland/shrubland)and forested national parks in Gabon,Central Africa(low-relief tropical rainforest and high-relief tropical rainforest).The statistical analysis is based on robust accuracy metrics that cater for normal and non-normal elevation error distribution,and error ranking.In Cape Town,Copernicus DEM generally had the least vertical error with an overall Mean Error(ME)of 0.82 m and Root Mean Square Error(RMSE)of 2.34 m while ASTER DEM had the poorest performance.However,ASTER GDEM and NASADEM performed better in the low-relief and high-relief tropical forests of Gabon.Generally,the DEM errors have a moderate to high positive correlation in forests,and a low to moderate positive correlation in mountains and urban areas.Copernicus DEM showed superior vertical accuracy in forests with less than 40%tree cover,while ASTER and NASADEM performed better in denser forests with tree cover greater than 70%.This study is a robust regional assessment of these global DEMs.展开更多
High-quality height reference data are embedded in the accuracy verification processes of most remote sensing terrain applications.The Ice,Cloud,and Land elevation Satellite 2(ICESat-2)/ATL08 terrain product has shown...High-quality height reference data are embedded in the accuracy verification processes of most remote sensing terrain applications.The Ice,Cloud,and Land elevation Satellite 2(ICESat-2)/ATL08 terrain product has shown promising results for estimating ground heights,but it has not been fully evaluated.Hence,this study aims to assess and enhance the accuracy of the ATL08 terrain product as a height reference for the newest versions of the Advanced Spaceborne Thermal Emission and Reflection Radiometer(ASTER),the Shuttle Radar Topography Mission(SRTM),and TanDEM-X(TDX)DEMs over vegetated mountainous areas.We used uncertainty-based filtering method for the ATL08 strong and weak beams to enhance their accuracy.Then,the results were evaluated against a reference airborne LiDAR digital terrain model(DTM),by selecting 10,000 points over the entire area and comparing the accuracy of ASTER,SRTM,and TDX DEMs assessed by the LiDAR DTM to the accuracy of the ASTER,SRTM,and TDX DEMs assessed by the ATL08 strong beams,weak beams,and all beams.We also detected the impact of the terrain aspect,slope,and land cover types on the accuracy of the ATL08 terrain elevations and their relationship with height errors and uncertainty.Our findings show the accuracy of the ATL08 strong beams was enhanced by 43.91%;while the weak beams accuracy was enhanced by 74.05%.Furthermore,slope strongly influenced ATL08 height errors and height uncertainty;especially on the weak beams.The errors induced by the slope significantly decreased when the uncertainty levels were reduced to<20 m.The evaluations of ASTER,SRTM,and TDX DEMs by ATL08 strong and weak beams are close to those assessed by LiDAR DTM points within 0.6 m for the strong beams.These findings indicate that ATL08 strong beams can be used as a height reference over vegetated mountainous regions.展开更多
This study considers seven commonly used surface fitting methods within Golden Software and ArcGIS^(TM) environments.Using grid sizes of 68 rows by 100 columns(6800 grids)and 680 rows by 1000 columns(680,000 grids)and...This study considers seven commonly used surface fitting methods within Golden Software and ArcGIS^(TM) environments.Using grid sizes of 68 rows by 100 columns(6800 grids)and 680 rows by 1000 columns(680,000 grids)and 294,208 elevation points covering the entire landmass of Nigeria,the study evaluates the performance of these methods in terms of execution time and faithfulness in the representation of the spatial elements.Results show marked differences in time taken to execute the fitting and that Inverse Distance,the Natural Neighbor,the Nearest Neighbor,and Triangulation with Linear Interpolation seem to give the highest level of correspondence or faithfulness.展开更多
Digital Elevation Models(DEM)of a hilly–valley region are prepared using stereo images of Cartosat-1 and Shuttle Radar Topography Mission(SRTM)images.The procedure of ortho-image generation from Cartosat-1 stereo ima...Digital Elevation Models(DEM)of a hilly–valley region are prepared using stereo images of Cartosat-1 and Shuttle Radar Topography Mission(SRTM)images.The procedure of ortho-image generation from Cartosat-1 stereo images and the estimation of ground features from ortho-image are elaborated in the paper.Comparison of DEMs prepared from both images is discussed in terms of the quality of ground features detection,hydrological applications and geometrical calculations.It is found that DEM prepared from Cartosat-1 images are more accurate in the valley region and hence it is better suited for hydrological applications.On the contrary,for hilly region,SRTM images produce better DEM.However,if ground control points and Rational Polynomial Coefficients can be obtained in the hilly region,more accurate DEM can be prepared using Cartosat-1 stereo images.展开更多
This paper considers the problems of the potential development of erosion processes in the natural landscapes of northern taiga in the Russian plain. It is considered that in forest ecosystems, erosion processes are s...This paper considers the problems of the potential development of erosion processes in the natural landscapes of northern taiga in the Russian plain. It is considered that in forest ecosystems, erosion processes are slow and are weakly reflected in the terrain. However, the situation changes radically if the vegetation cover integrity is violated, which is inevitable with the modern methods of developing northern territories. Furthermore, global changes in average annual temperatures and the occurrence of karst processes may be the reason behind the development of erosion processes. The authors suggest a method for determining territories with a varying occurrence probability of erosional processes, based on digital elevation modelling. The territory of the Pinezhsky Nature Reserve(Arkhangelsk region) was chosen as the test plot. Direct field studies were previously used to detect exogenous geological processes in this territory. The authors were the first to suggest digital elevation modelling as a method that allows determining the potential danger of erosion in karst landscapes of the northern taiga. The geomorphometric studies resulted in the determination of areas with the greatest and lowest occurrence probability of erosion processes in the Pinezhsky Nature Reserve. It was established that the most significant erosion type was linear erosion, represented by incised river valleys and karst ravines. Sheet erosion is less significant and occurs as sinkholes, local declines, and chasms over the valleys of subterranean rivers.展开更多
基金funded by the Ministry of Higher Education Malaysia(MOHE)through the Fundamental Research Grant Scheme(FRGS/1/2021/WAB07/UiTM/02/1).
文摘Digital ElevationModel(DEM)refers to a digital map of the surface of the Earth that only shows the bare ground,without any buildings,plants,or other characteristics.However,obtaining unlimited access to DEM data at high and medium resolutions is very hard.Consequently,users often question the accuracy of freely available DEMs and their suitability for various applications.By comparing them to Global Positioning System(GPS)elevation data,this study aimed to identify themost reliable and widely available DEM for various terrains.The objectives of this study were to generate DEMs fromdifferent open sources and validate the accuracy of these DEMs using GPS elevation data.Various DEM types including Sentinel-1,ALOS PALSAR,SRTM,AW3D30,and ASTER were compared.Root Mean Square Error(RMSE)andMean Error(ME)were used to measure the difference between the DEM-derived elevations and the GPS-measured elevations.The results showed that even though Sentinel-1 has higher resolutions,the accuracy of the DEM from Sentinel-1 depends on issues including coherence and interferometry,surface features,and temporal stability.On the other hand,ALOS PALSAR could accurately represent surfaces in some situations.Additionally,DEMs with lower resolutions,such as SRTM and AW3D30,demonstrated greater consistency across various types of terrain.In contrast,the ASTER DEM showed more variability in complex terrains.While freely available DEMs are easy to use and accessible,their accuracy varies depending on the source and terrain features.Future improvements could include adding more ground control points and using advanced filtering methods to enhance precision.
基金This work was supported by Knowledge Innovation Pro-gram Chinese Academy of Sciences (No. KZCX2-SW-320-3 & KZCX3-SW-425).
文摘Boundary extraction of watershed is an important step in forest landscape research. The boundary of the upriver wa-tershed of the Hunhe River in the sub-alpine Qingyuan County of eastern Liaoning Province, China was extracted by digital elevation modeling (DEM) data in ArcInfo8.1. Remote sensing image of the corresponding region was applied to help modify its copy according to Enhanced Thematic Mapper (ETM) image抯 profuse geomorphological structure information. Both the DEM-dependent boundary and modified copy were overlapped with county map and drainage network map to visually check the effects of result. Overlap of county map suggested a nice extraction of the boundary line since the two layers matched precisely, which indicated the DEM-dependent boundary by program was effective and precise. Further upload of drainage network showed discrepancies between the boundary and the drainage network. Altogether, there were three sections of the extraction result that needed to correct. Compared with this extraction boundary, the modified boundary had a better match to the drainage network as well as to the county map. Comprehensive analysis demonstrated that the program extraction has generally fine precision in position and excels the digitized result by hand. The errors of the DEM-dependant extraction are due to the fact that it is difficult for program to recognize sections of complex landform especially altered by human activities, but these errors are discernable and adjustable because the spatial resolution of ETM image is less than that of DEM. This study result proved that application of remote sensing information could help obtain better result when DEM method is used in extraction of watershed boundary.
基金support by the National Science Foundation of the United States(Grant No.BCS-1227018)the National Nature Science Foundation of China(Grant No.41328001)
文摘Topographic shielding(TS) is an important factor in cosmogenic nuclide surface exposure dating. The development of geographic information systems(GIS) and the availability of digital elevation models(DEMs) make it possible to derive this factor directly from a DEM. Most available GIS models derive the TS factors for an area(all cells in a DEM) without the consideration of surface conditions of individual sites, such as the strike, dip,and height above ground, into the calculation. This paper presents a new GIS model to derive the TS factors for discrete sample sites. This model uses the Skyline and Skyline Graph functions in ArcGIS to extract the set of azimuth and elevation angles of topographic obstructions around each site from a DEM(considering the sample height above ground)and then incorporates the strike and dip information of the sample surface to derive the TS factor. All processing tools and steps are streamlined in ArcGIS modelbuilder and this model can be run like a standard ArcGIS geoprocessing tool. It provides an easy and user-friendly means to derive the TS factors for discrete samples based on a DEM and the measured strike, dip and sample height for each site.
基金Under the auspices of National Youth Science Foundation of China(No.41001294)Key Project of National Natural Science Foundation of China(No.40930531)Research Fund of State Key Laboratory Resources and Environment Information System(No.2010KF0002SA)
文摘In China′s Loess Plateau area, gully head is the most active zone of a drainage system in gully areas. The differentiation of loess gully head follows geospatial patterns and reflects the process of the loess landform development and evolution of its drainage system to some extent. In this study, the geomorphic meaning, basic characteristics, morphological structure and the basic types of loess gully heads were systematically analysed. Then, the loess gully head′s conceptual model was established, and an extraction method based on Digital Elevation Model(DEM) for loess gully head features and elements was proposed. Through analysing the achieved statistics of loess gully head features, loess gully heads have apparently similar and different characteristics depending on the different loess landforms where they are found. The loess head characteristics reflect their growth period and evolution tendency to a certain degree, and they indirectly represent evolutionary mechanisms. In addition, the loess gully developmental stages and the evolutionary processes can be deduced by using loess gully head characteristics. This study is of great significance for development and improvement of the theoretical system for describing loess gully landforms.
基金supported by the Professional Development Award of the University of Tennessee
文摘Topographic shielding of cosmic radiation flux is a key parameter in using cosmogenic nuclides to determine surface exposure ages or erosion rates. Traditionally, this parameter is measured in the field and uncertainty and/or inconsistency may exist among different investigators. This paper provides an ArcGIS python code to determine topographic shielding factors using digital elevation models （DEMs）. This code can be imported into ArcGIS as a geoprocessing tool with a user-friendly graphical interface. The DEM-derived parameters using this method were validated with field measurements in central Tian Shan. Results indicate that DEM-derived shielding factors are consistent with field-measured values. It provides a valuable tool to save fieldwork efforts and has the potential to provide consistent results for different regions in the world to facilitate the comparison of cosmogenie nuclide results.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No. XDA20010203)
文摘Tropical mountainous areas not only provide substantial carbon storage and play an important role in global biological diversity, but also provide basic livelihood for a large number of poor ethnic minorities. However, there is no unified and explicit definition for mountainous areas. The local elevation range(LER) is a crucial structural parameter for delineating mountainous areas. However, current LER products are limited by the subjective selection of an optimum statistical window or coarser spatial resolution of topographical data. In this study, we presented an approach using thresholds for three topographic parameters, elevation, slope, and LER, derived from the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model(ASTER GDEM) to redelineate the vast mountainous areas of mainland Southeast Asia(MSEA). The mean change-point analysis method was applied to determine the optimum statistical window of the 1 arc second(approximately 30 m)-resolution GDEM LER. The results showed that: First, the optimum statistical window is 38 × 38 cell units(width × height) in a rectangular neighborhood, or an area of about 1.30 km^2 for calculating GDEM LER in MSEA. Second, the LER of more than 80% of the area ranges from 30 m to 499 m in MSEA. The LERs in the northern and northwestern MSEA are greater than their counterparts in the south and east. Third, the area of the re-delineated mountainous areas was 83.52 × 10~4 km^2, about 38.71% of the total area. Spatially, the mountainous areas are mainly distributed in the north and northeast of MSEA. The re-delineated 30-m resolution map of the mountainous areas will serve as a topographical dataset for monitoring mountainrelated land surface changes in MSEA. The parameter-modified mountain extraction procedure can be expanded to delineate global mountainous areas.
基金the National Basic Research Program(973)of China(No.2007CB714103)
文摘A new algorithm to automatically extract drainage networks and catchments based on triangulation irregular networks(TINs) digital elevation model(DEM) was developed. The flow direction in this approach is determined by computing the spatial gradient of triangle and triangle edges. Outflow edge was defined by comparing the contribution area that is separated by the steepest descent of the triangle. Local channels were then tracked to build drainage networks. Both triangle edges and facets were considered to construct flow path. The algorithm has been tested in the site for Hawaiian Island of Kaho'olawe, and the results were compared with those calculated by ARCGIS as well as terrain map. The reported algorithm has been proved to be a reliable approach with high efficiency to generate well-connected and coherent drainage networks.
基金partially supported by JSPS KAKENHI(Grant No.16H03153)the Limestone Association of Japan。
文摘Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes.Differential interferometric synthetic aperture radar(DInSAR),mounted on an artificial satellite,has the potential to be a cost-effective method for monitoring surface displacements over extensive areas,such as open-pit mines.DInSAR requires the ground surface elevation data in the process of its analysis as a digital elevation model(DEM).However,since the topography of the ground surface in open-pit mines changes largely due to excavations,measurement errors can occur due to insufficient information on the elevation of mining areas.In this paper,effect of different elevation models on the accuracy of the displacement monitoring results by DInSAR is investigated at a limestone quarry.In addition,validity of the DInSAR results using an appropriate DEM is examined by comparing them with the results obtained by global positioning system(GPS)monitoring conducted for three years at the same limestone quarry.It is found that the uncertainty of DEMs induces large errors in the displacement monitoring results if the baseline length of the satellites between the master and the slave data is longer than a few hundred meters.Comparing the monitoring results of DInSAR and GPS,the root mean square error(RMSE)of the discrepancy between the two sets of results is less than 10 mm if an appropriate DEM,considering the excavation processes,is used.It is proven that DInSAR can be applied for monitoring the displacements of mine slopes with centimeter-level accuracy.
基金supported by the Crisis Management division of Toho village, and JSPS KAKENHI Grant Number (18K04660)
文摘To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communities. We tested the effectiveness of simply identifying debris-flow hazards through automated derivation of surface curvatures using LiDAR digital elevation models. We achieved useful correspondence between plan curvatures and areas of existing debris-flow damage in two localities in Japan using the analysis of digital elevation models(DEMs). We found that plan curvatures derived from 10 m DEMs may be useful to indicate areas that are susceptible to debris flow in mountainous areas. In residential areas located on gentle sloping debris flow fans, the greatest damage to houses was found to be located in the elongated depressions that are connected to mountain stream valleys. Plan curvaturederived from 5 m DEM was the most sensitive indicators for susceptibility to debris flows.
基金financial support from the National Natural Science Foundation of China(No.40201021)the Zhejiang Natural Science Foundation of China(M403040).
文摘In China, many scenic and tourism areas are suffering from the urbanization that results from physical development of tourism projects, leading to the removal of the vegetative cover, the creation of areas impermeable to water, in-stream modifications, and other problems. In this paper, the risk of soil erosion and its ecological risks in the West Lake Scenic Spots （WLSS） area were quantitatively evaluated by integrating the revised universal soil loss equation （RUSLE） with a digital elevation model （DEM） and geographical information system （GIS） software. The standard RUSLE factors were modified to account for local climatic and topographic characteristics reflected in the DEM maps, and for the soil types and vegetation cover types. An interface was created between the Areinfo software and RUSLE so that the level of soil erosion and its ecological risk in the WLSS area could be mapped immediately once the model factors were defined for the area. The results from an analysis using the Areinfo-RUSLE interface showed that the risk value in 93 % of the expanding western part of the WLSS area was moderate or more severe and the soil erosion risk in this area was thus large compared with that in the rest of the area. This paper mainly aimed to increase the awareness of the soil erosion risk in urbanizing areas and suggest that the local governments should consider the probable ecological risk resulting from soil erosion when enlarging and developing tourism areas.
基金supported by the National Natural Science Foundation of China(Grant Nos.41471316,41401456)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions-PAPD(Grant No.164320H101)+1 种基金Major University Science Research Project of Jiangsu Province(Grant No.13KJA170001)the financial support provided by the PhD Scholarship from Eurasic Pacific Uninet for collaboration research in Austria
文摘Although many studies have investigated slope gradient uncertainty derived from Digital Elevation Models(DEMs), the research concerning slope length uncertainty is far from mature. This discrepancy affects the availability and accuracy of soil erosion as well as hydrological modeling. This study investigates the formation and distribution of existing errors and uncertainties in slope length derivation based on 5-m resolution DEMs of the Loess Plateau in the middle of China. The slope length accuracy in three different landform areas is examined to analyse algorithm effects. The experiments indicate that the accuracy of the flat test area is lower than that of the rougher areas. The value from the specific contributing area(SCA) method is greater than the cumulative slope length(CSL), and the differences between these two methods arise from the shape of the upslope area. The variation of mean slope length derived from various DEM resolutions and landforms. The slope length accuracy decreases with increasing grid size and terrain complexity at the six test sites. A regression model is built to express the relationship of mean slope length with DEM resolution less than 85 m and terrain complexity represented by gully density. The results support the understanding of the slope length accuracy, thereby aiding in the effective evaluation of the modeling effect of surface process.
文摘This paper investigates the differences that result from applying different approaches to uncertainty modeling and reports an experimental examining error estimation and propagation in elevation and slope, with the latter derived from the former. It is confirmed that significant differences exist between uncertainty descriptors, and propagation of uncertainty to end products is immensely affected by the specification of source uncertainty.
基金Funded by the Natural Science Foundation of Chongqing under Grant No. CSTC2006AB1015.
文摘Researchers in P.R.China commonly create triangulate irregular networks(TINs) from contours and then convert TINs into digital elevation models(DEMs).However,the DEM produced by this method can not precisely describe and simulate key hydrological features such as rivers and drainage borders.Taking a hilly region in southwestern China as a research area and using ArcGISTM software,we analyzed the errors of different interpolations to obtain distributions of the errors and precisions of different algorithms and to provide references for DEM productions.The results show that different interpolation errors satisfy normal distributions,and large error exists near the structure line of the terrain.Furthermore,the results also show that the precision of a DEM interpolated with the Australian National University digital elevation model(ANUDEM) is higher than that interpolated with TIN.The DEM interpolated with TIN is acceptable for generating DEMs in the hilly region of southwestern China.
文摘The morphological and volumetric changes of a sandy beach were investigated through a series of two- monthly filed surveys carried out aver a 2-year period from April 2005 to January 2007. This paper discuss the ability of 3-D digital elevation models (DEMs) derived from high accurate data to assess and quantify beach morphodynamics in relation with wave forcing. The methodology and data acquisition are described and consist mainly in the production of interpolated DEMs from which a variety of representations can be made, including as elevation change maps, two-dimensional cross-sections of the beach, calculation of net volume. The results of the analysis highlight seasonal changes in beach morphology due to variations in wave energy. This behavior is characterized by beach erosion and bar decay under high-energy waves and net accretion and bar formation during relatively fair weather conditions. The sand budgets adjustments show that the loss of volume in the winter months is compensated for by accumulation to the beach during summer. This trend suggests that there is a mechanism which controls the beach evolution. The correlation between beach changes and wave energy variations highlights a net relation between them. The results from this in- vestigation state the value of DEMs utilized and demonstrate the efficiency of the 3-D approach employed here to assess the erosion and accretion patterns which would not be visualized using 2-D profiles.
基金supported by the(i)Commonwealth Scholarship Commission and the Foreign,Commonwealth and Development Office in the UK[Grant number NGCN-2021-239](ii)University of Cape Town Postgraduate Funding Office.
文摘Validation studies of global Digital Elevation Models(DEMs)in the existing literature are limited by the diversity and spread of landscapes,terrain types considered and sparseness of groundtruth.Moreover,there are knowledge gaps on the accuracy variations in rugged and complex landscapes,and previous studies have often not relied on robust internal and external validation measures.Thus,there is still only partial understanding and limited perspective of the reliability and adequacy of global DEMs for several applications.In this study,we utilize a dense spread of LiDAR groundtruth to assess the vertical accuracies of four medium-resolution,readily available,free-access and global coverage 1 arc-second(30 m)DEMs:NASADEM,ASTER GDEM,Copernicus GLO-30,and ALOS World 3D(AW3D).The assessment is carried out at landscapes spread across Cape Town,Southern Africa(urban/industrial,agricultural,mountain,peninsula and grassland/shrubland)and forested national parks in Gabon,Central Africa(low-relief tropical rainforest and high-relief tropical rainforest).The statistical analysis is based on robust accuracy metrics that cater for normal and non-normal elevation error distribution,and error ranking.In Cape Town,Copernicus DEM generally had the least vertical error with an overall Mean Error(ME)of 0.82 m and Root Mean Square Error(RMSE)of 2.34 m while ASTER DEM had the poorest performance.However,ASTER GDEM and NASADEM performed better in the low-relief and high-relief tropical forests of Gabon.Generally,the DEM errors have a moderate to high positive correlation in forests,and a low to moderate positive correlation in mountains and urban areas.Copernicus DEM showed superior vertical accuracy in forests with less than 40%tree cover,while ASTER and NASADEM performed better in denser forests with tree cover greater than 70%.This study is a robust regional assessment of these global DEMs.
基金supported in part by the National Natural Science Foundation of China under grant of 42090012in part by the project supported by the Open Fund of Hubei Luojia Laboratory(220100009)+3 种基金in part by 03 special research and 5G project of Jiangxi province in China(20212ABC03A09)Zhuhai industry university research cooperation project of China(ZH22017001210098PWC)Sichuan Science and Technology Program(2022YFN0031)Zhizhuo Research Fund on Spatial-Temporal Artificial Intelligence(Grant No.ZZJJ202202).
文摘High-quality height reference data are embedded in the accuracy verification processes of most remote sensing terrain applications.The Ice,Cloud,and Land elevation Satellite 2(ICESat-2)/ATL08 terrain product has shown promising results for estimating ground heights,but it has not been fully evaluated.Hence,this study aims to assess and enhance the accuracy of the ATL08 terrain product as a height reference for the newest versions of the Advanced Spaceborne Thermal Emission and Reflection Radiometer(ASTER),the Shuttle Radar Topography Mission(SRTM),and TanDEM-X(TDX)DEMs over vegetated mountainous areas.We used uncertainty-based filtering method for the ATL08 strong and weak beams to enhance their accuracy.Then,the results were evaluated against a reference airborne LiDAR digital terrain model(DTM),by selecting 10,000 points over the entire area and comparing the accuracy of ASTER,SRTM,and TDX DEMs assessed by the LiDAR DTM to the accuracy of the ASTER,SRTM,and TDX DEMs assessed by the ATL08 strong beams,weak beams,and all beams.We also detected the impact of the terrain aspect,slope,and land cover types on the accuracy of the ATL08 terrain elevations and their relationship with height errors and uncertainty.Our findings show the accuracy of the ATL08 strong beams was enhanced by 43.91%;while the weak beams accuracy was enhanced by 74.05%.Furthermore,slope strongly influenced ATL08 height errors and height uncertainty;especially on the weak beams.The errors induced by the slope significantly decreased when the uncertainty levels were reduced to<20 m.The evaluations of ASTER,SRTM,and TDX DEMs by ATL08 strong and weak beams are close to those assessed by LiDAR DTM points within 0.6 m for the strong beams.These findings indicate that ATL08 strong beams can be used as a height reference over vegetated mountainous regions.
基金Supported by the National Space Research and Development Agency(NASRDA).
文摘This study considers seven commonly used surface fitting methods within Golden Software and ArcGIS^(TM) environments.Using grid sizes of 68 rows by 100 columns(6800 grids)and 680 rows by 1000 columns(680,000 grids)and 294,208 elevation points covering the entire landmass of Nigeria,the study evaluates the performance of these methods in terms of execution time and faithfulness in the representation of the spatial elements.Results show marked differences in time taken to execute the fitting and that Inverse Distance,the Natural Neighbor,the Nearest Neighbor,and Triangulation with Linear Interpolation seem to give the highest level of correspondence or faithfulness.
基金The authors acknowledge Board of Research in Nuclear Sciences(BRNS),Bhabha Atomic Research Centre(BARC),Mumbai for sponsoring this project.
文摘Digital Elevation Models(DEM)of a hilly–valley region are prepared using stereo images of Cartosat-1 and Shuttle Radar Topography Mission(SRTM)images.The procedure of ortho-image generation from Cartosat-1 stereo images and the estimation of ground features from ortho-image are elaborated in the paper.Comparison of DEMs prepared from both images is discussed in terms of the quality of ground features detection,hydrological applications and geometrical calculations.It is found that DEM prepared from Cartosat-1 images are more accurate in the valley region and hence it is better suited for hydrological applications.On the contrary,for hilly region,SRTM images produce better DEM.However,if ground control points and Rational Polynomial Coefficients can be obtained in the hilly region,more accurate DEM can be prepared using Cartosat-1 stereo images.
基金sponsored by Russian Federal Agency of Scientific Organizations within the project№0410-2014-0024?Development of a comprehensive physical and geo-environmental quantitative model of interaction(lithosphere,hydrosphere,biosphere,atmosphere and,partially,the ionosphere)in the areas of north tectonic units of the Russian Plate and assess of their impact on the environment
文摘This paper considers the problems of the potential development of erosion processes in the natural landscapes of northern taiga in the Russian plain. It is considered that in forest ecosystems, erosion processes are slow and are weakly reflected in the terrain. However, the situation changes radically if the vegetation cover integrity is violated, which is inevitable with the modern methods of developing northern territories. Furthermore, global changes in average annual temperatures and the occurrence of karst processes may be the reason behind the development of erosion processes. The authors suggest a method for determining territories with a varying occurrence probability of erosional processes, based on digital elevation modelling. The territory of the Pinezhsky Nature Reserve(Arkhangelsk region) was chosen as the test plot. Direct field studies were previously used to detect exogenous geological processes in this territory. The authors were the first to suggest digital elevation modelling as a method that allows determining the potential danger of erosion in karst landscapes of the northern taiga. The geomorphometric studies resulted in the determination of areas with the greatest and lowest occurrence probability of erosion processes in the Pinezhsky Nature Reserve. It was established that the most significant erosion type was linear erosion, represented by incised river valleys and karst ravines. Sheet erosion is less significant and occurs as sinkholes, local declines, and chasms over the valleys of subterranean rivers.
