Moirépatterns from two-dimensional(2D)graphene heterostructures assembled via van der Waals interactions have sparked considerable interests in physics with the purpose to tailor the electronic properties of grap...Moirépatterns from two-dimensional(2D)graphene heterostructures assembled via van der Waals interactions have sparked considerable interests in physics with the purpose to tailor the electronic properties of graphene.Here we report for the first time the observation of moire patterns arising from a bilayer graphone/graphene superlattice produced through direct single-sided hydrogenation of a bilayer graphene on substrate.Compared to pristine graphene,the bilayer superlattice exhibits a rippled surface and two types of moire patterns are observed:triangular and linear moire patterns with the periodicities of 11 nm and 8-9 nm,respectively.These moire patterns are revealed from atomic force microscopy and further confirmed by following fast Fourier transform(FFT)analysis.Density functional theory(DFT)calculations are also performed and the optimized lattice constants of bilayer superlattice heterostructure are in line with our experimental analysis.These findings show that well-defined triangular and linear periodic potentials can be introduced into the graphene system through the single-sided hydrogenation and also open a route towards the tailoring of electronic properties of graphene by various moirépotentials.展开更多
Micron-sized graphene sheets have been introduced as additives to enhance the lubricating capabilities of water.The tribological characteristics of the lubricants after preparation and storage for 6 months were system...Micron-sized graphene sheets have been introduced as additives to enhance the lubricating capabilities of water.The tribological characteristics of the lubricants after preparation and storage for 6 months were systematically analyzed.Results indicated that the friction coefficient and wear volume of the tribo-pair were reduced through the incorporation of a certain concentration of graphene sheets,and also have long-term storage stability.Notably,under the experimental conditions,a 0.2%mass concentration of graphene in the aqueous lubricant exhibited exceptional tribological performance and long-term storage stability,achieving an 80%reduction in friction coefficient and a 78%decrease in wear volume with a 14000-cycle friction test.Wear morphology analysis indicated that after adding graphene sheets to the aqueous solution,micro-plastic deformation occurs on the worn surface of the steel plate.The wear profile of the GCr15 counter ball changes from a circular profile to a rectangular-like profile.The main reason is that the graphene sheets in the aqueous solution can enter the contact interface during the friction process,hindering direct contact between the friction pair.The study prov-ides a simple method to improve the tribological properties of aqueous solutions stably for engineering applica-tions.展开更多
Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to t...Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.展开更多
In this study,a facile method was employed to synthesize strong,yet highly elastic polyurethane-urea(PUU)with typical characteristics and 94% optical transmittance.Graphene platelets(GNPs)were prepared and modified vi...In this study,a facile method was employed to synthesize strong,yet highly elastic polyurethane-urea(PUU)with typical characteristics and 94% optical transmittance.Graphene platelets(GNPs)were prepared and modified via a scalable and eco-friendly mechanochemical approach.The produced GNPs is at 1.6-nm thickness with high electrical conductivity of~950 S/m.The structure-property relations of PUU/GNP nanocomposites were comprehensively investigated through morphology and mechanical properties measurements.The strong interface and high-density hydrogen bonds between modified GNPs(M-GNPs)and PUU significantly enhanced the mechanical properties of the PUU nanocomposite.The PUU composite showed 66.7%and 36.2%increments in tensile and impact strengths,respectively,at 0.2 wt% M-GNPs.The reversible hydrogen bond between M-GNPs and PUU endowed the nanocomposite with self-healing properties achieving 97.8% healing efficiency of the strength after 5 h at 120℃.This study demonstrates the importance of surface modification and provides a simple yet robust approach for preparing high-performance and functional PUU/graphene composites.展开更多
Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon ...Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.展开更多
With the convergence of sensor technology,artificial intelligence,and the Internet of Things,intelligent vibration monitoring systems are undergoing transformative development.This evolution imposes stringent demands ...With the convergence of sensor technology,artificial intelligence,and the Internet of Things,intelligent vibration monitoring systems are undergoing transformative development.This evolution imposes stringent demands on the miniaturization,low power consumption,high integration,and environmental adaptability of transducers.Graphene,renowned for its superlative physicochemical attributes,holds significant promise for application in micro-and nanoelectromechanical systems(M/NEMS).However,the inherent central symmetry of graphene restricts its utility in piezoelectric devices.Inspired by the sensilla trichoidea of spiders,a threedimensional(3D)cilia-like monolayer graphene omnidirectional vibration transducer(CGVT)based on a stress-induced self-assembly mechanism is fabricated,demonstrating notable performance and high-temperature resistance.Furthermore,3D vibration vector decoding is realized via an omnidirectional decoupling algorithm based on one-dimensional convolutional neural networks(1DCNN)to achieve precise discrimination of vibration directions.The 3D bionic vibration-sensing system incorporates a spider web structure into a bionic cilia MEMS chip through a gold wire bonding process,enabling the realization of three distinct mechanisms for vibration detection and recognition.In particular,these devices are manufactured using silicon-based semiconductor processing techniques and MEMS fabrication methodologies,leading to a substantial reduction in the dimensions of individual components compared to traditional counterparts.展开更多
With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivit...With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.展开更多
We numerically investigate the effect of in-plane bending strain on valley-resolved conductance and valley polarization in a graphene nanoribbon with zigzag edges.The central region of the nanoribbon is bent into an a...We numerically investigate the effect of in-plane bending strain on valley-resolved conductance and valley polarization in a graphene nanoribbon with zigzag edges.The central region of the nanoribbon is bent into an arc with central angleφ.We find that the bending strain reduces the conductance but enhances the valley polarization.In the valley-resolved conductance spectra,there exist single-valley plateaus near the Dirac points and distinct Fano-type dips.Accordingly,a plateau of full valley polarization appears,which expands significantly at largeφ.At valleyresolved conductance dips,the valley polarization can be much larger than that in the unstrained case.The bending-induced enhancement of valley polarization can be explained by the features of pseudo-Landau levels in the bent region.Strain-induced valley polarization depends nonmonotonously on the nanoribbon width.These findings could be helpful in designing valleytronic devices with flexibility.展开更多
In this study,the multi-scale(meso and macro)modelling was used to predict the electric response of the material.Porosity was introduced through a sugar-templating process to enhance compressibility and sensitivity.Me...In this study,the multi-scale(meso and macro)modelling was used to predict the electric response of the material.Porosity was introduced through a sugar-templating process to enhance compressibility and sensitivity.Mean-field homogenization was employed to predict the electrical conductivity of the nanocomposites,which was validated experimentally through I–V characterisation,confirming stable Ohmic behavior.The homogenised material parameters were incorporated into COMSOLMultiphysics to simulate diaphragmdeflection and capacitance variation under applied pressure.Experimental results showed a linear and stable capacitance response at the force magnitude of 0–7 N.The Graphene nanoplatelets(GnP)–Polydimethylsiloxane(PDMS)sensor demonstrated superior sensitivity(0.0032 pF/N)compared to the CNT–PDMS sensor(0.0019 pF/N),attributed to improved filler dispersion and higher effective surface area of GnP.Finite element simulations were further conducted to evaluate stress distribution in a GnP–PDMS-based capacitive sensor integrated into a shoe insole for gait analysis.The results correlated well with experimental capacitance changes,validating the sensor’s mechanical reliability and pressure sensitivity.This comparative study establishes the GnP–PDMS composite as a more effective candidate for low-cost,biocompatible,and high-performance flexible pressure sensors in wearable biomedical and gait monitoring applications.展开更多
Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic struct...Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.展开更多
Early detection and treatment of colorectal cancer can effectively reduce the harm caused to patients.However,early symptoms are not obvious.Exosomes are extracellular vesicles that carry information between cells cir...Early detection and treatment of colorectal cancer can effectively reduce the harm caused to patients.However,early symptoms are not obvious.Exosomes are extracellular vesicles that carry information between cells circulating in the human body.Despite the critical importance of tumor-derived exosomes for early cancer detection,prognosis,and treatment guidance,sensitive detection of exosomes remains challenging.We report a novel immunosensor for the detection of exosomes using graphene oxide(GO)/Au/Ag as the electrochemical sensing platform and spherical Au@PtPd porous nanoparticles to provide signal amplification.A large-surface-area GO/Au/Ag-modified screen-printed carbon electrode(SPCE)is used to immobilize CD63 aptamers.The prepared strawberry-like Au@PtPd demonstrates improved sensitivity and electrocatalytic activity with increasing aptamer load.Meanwhile,its good conductivity accelerates the electron transfer rate on the SPCE.The immunosensor exhibits a linear range(100–1.0×10^(6)exosomes·μl^(−1))and a detection limit of 23 exosomes·μl^(−1).Furthermore,its potential for the detection of exosomes provides a new clinical application for early diagnosis of colorectal tumors.展开更多
In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires...In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires.Microstructure and property analyses in both the cold-drawn and annealed states show that the incorporation of graphene significantly improves the ductility and electrical conductivity of the copper wire.After annealing at 350℃ for 30 minutes,the composite wire demonstrates a tensile strength of 270 MPa and an electrical conductivity of 102.74%IACS,both superior to those of pure copper wire under identical conditions.At 150℃,the electrical conductivity of the annealed composite wire reaches 72.60%IACS,notably higher than the 68.19%IACS of pure copper.The results suggest that graphene is uniformly distributed within the composite wire,with minimal impact on conductivity,while effectively refining the copper grain structure to enhance ductility.Moreover,graphene suppresses copper lattice vibrations at elevated temperatures,reducing the rate of conductivity degradation.展开更多
Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into por...Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into porous,conductive graphene.This single-step laser writing approach enables flexible,patternable electrodes without complex post-processing.With its high conductivity,large surface area,and tunable chemistry,LIG is well-suited for diverse applications including batteries,supercapacitors,dyesensitized solar cells(DSSCs),dual cells,water-splitting electrocatalysis,and triboelectric nanogenerators(TENGs).In energy storage,LIG improves charge transport,buffer volume changes,and provides a robust framework,enhancing capacitance,cycling stability,and rate capability.Its catalytic activity is further boosted through heteroatom doping or transition-metal incorporation,achieving HER/OER performance comparable to noble metals.In DSSCs,LIG functions as a flexible,low-cost alternative to platinum counter electrodes,while in TENGs,its strong triboelectric response and mechanical durability enable integration into self-powered,wearable systems.Despite the immense recent progress in this field,challenges remain regarding the scalability,long-term operational stability,and interfacial engineering of LIGbased composites.Further exploration into multi-laser systems,substrate diversity,and synergistic composite architectures will be crucial to optimizing device performance and reliability.Nevertheless,the green,cost-efficient,rapid,and programmable synthesis of LIG poses it as a cornerstone potential building block material in the development of future sustainable and multifunctional energy systems.Throughout the review we compare fabrication strategies,summarize performance metrics against relevant benchmarks,and identifying common mechanistic advantages conferred by the laser writing process.Remaining challenges-such as scale-up,precursor diversity,long-term environmental stability,and integration into complex device architectures-are outlined alongside prospective research directions.Collectively,this review article provides an in-depth perspective on the multifunctional nature of LIG,underscoring its promise in next-generation energy storage,conversion,harvesting applications,and laying the groundwork for future research directions.展开更多
Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,...Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.展开更多
We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modi...We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modified PTFE(PTFE-O)with graphene oxide(GO),enabling tight interactions between the two phases through hydrogen bonding and van der Waals forces.Comprehensive characterizations,including XPS,FTIR,SEM,and contact angle analysis,confirmed the successful surface modification and uniform dispersion of GO.The optimized PTFE-O/GO composite exhibits a low resistivity of 2.41×10^(3)Ω·cm under a compression pressure of 2 MPa,demonstrating markedly improved conductivity and antistatic performance.These findings provide an effective route for constructing conductive PTFE-based composites and offer new insights into interface-engineered antistatic polymer materials.展开更多
Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artific...Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.展开更多
The practical use of lithium metal anodes(LMAs)is impeded by uncontrolled dendrite growth,primarily caused by uneven Li-ion flux and significant volume changes during cycling.To overcome these challenges,we present bi...The practical use of lithium metal anodes(LMAs)is impeded by uncontrolled dendrite growth,primarily caused by uneven Li-ion flux and significant volume changes during cycling.To overcome these challenges,we present binder-free holey wrinkled-multilayered graphene(HWMG)scaffolds for highperformance LMAs with long cycle life.Holey graphene oxide(HGO)sheets were restacked into particle-like holey wrinkled-multilayered graphene oxide(HWMGO)in a high-concentration GO suspension,in which few-layer HGOs were quickly stabilized and wrinkled during the drying process,and upon reduction,they transformed into HWMG.HWMG exhibited excellent adhesion due to chemical interactions via edge-located functional groups.Its particle-like morphology,with numerous nanopores and high porosity,conferred outstanding mechanical flexibility and low tortuosity,enabling uniform Li-ion flux,buffering volume expansion,and suppressing dendrite growth.As a result,excellent long-term stability over 800 cycles and a voltage hysteresis of ca.7 mV over 6000 h were realized for the HWMG scaffolds,and a high areal capacity of 3.34 mAh cm^(-2) at 0.3 C after 350 cycles was demonstrated in a full-cell configuration.This work promotes the practical application of LMAs by offering a scalable scaffold design that suppresses dendrites and enhances cycle life.展开更多
When two layers of graphene are stacked with a twist angle of approximately 1.1°,strong interlayer coupling gives rise to a pair of flat bands in twisted bilayer graphene(TBG),resulting in pronounced electron–el...When two layers of graphene are stacked with a twist angle of approximately 1.1°,strong interlayer coupling gives rise to a pair of flat bands in twisted bilayer graphene(TBG),resulting in pronounced electron–electron interactions.At half filling of the flat bands,TBG exhibits correlated insulating states.Here,we investigate the electrical transport properties of heterostructures composed of TBG and the antiferromagnetic insulator chromium oxychloride(CrOCl),and propose a strategy to modulate the correlated insulating states in TBG.During the transition from a conventional phase to a strong interfacial coupling phase,kink-like features are observed in the charge neutrality point(CNP),correlated insulating state,and band insulating state.Under a perpendicular magnetic field,the system exhibits broadened quantum Hall plateaus in the strong interfacial coupling regime.Electrons localized in the CrOCl layer screen the bottom gate,rendering the carrier density in TBG less sensitive to variations in the bottom gate voltage.These phenomena are well captured by a charge-transfer model between TBG and CrOCl.Our results provide insights into the control of electronic correlations and topological states in graphene moirésystems via interfacial charge coupling.展开更多
基金We acknowledge the financial support from the National Natural Science Foundation of China(No.51905306)the China Postdoctoral Science Fund(No.2018M642650)the Special Support for Post-doc Creative Funding of Shandong Province(No.201902005).We are also grateful for the funding support from the University of Manchester Donator Foundation and Swedish Research Council Formas(No.2019-01538).Dr.Chloe Holyord from National Graphene Institute,University of M anchester is gratefully acknowledged for the help with AFM m easurem ents.Dr.Linqing Zhang and Mr.Malachy Mcgowan are greatly acknowledged for the experimental support in the sample preparation.
文摘Moirépatterns from two-dimensional(2D)graphene heterostructures assembled via van der Waals interactions have sparked considerable interests in physics with the purpose to tailor the electronic properties of graphene.Here we report for the first time the observation of moire patterns arising from a bilayer graphone/graphene superlattice produced through direct single-sided hydrogenation of a bilayer graphene on substrate.Compared to pristine graphene,the bilayer superlattice exhibits a rippled surface and two types of moire patterns are observed:triangular and linear moire patterns with the periodicities of 11 nm and 8-9 nm,respectively.These moire patterns are revealed from atomic force microscopy and further confirmed by following fast Fourier transform(FFT)analysis.Density functional theory(DFT)calculations are also performed and the optimized lattice constants of bilayer superlattice heterostructure are in line with our experimental analysis.These findings show that well-defined triangular and linear periodic potentials can be introduced into the graphene system through the single-sided hydrogenation and also open a route towards the tailoring of electronic properties of graphene by various moirépotentials.
基金Supported by the National Natural Science Foundation of China(Grant Nos.52305186,52275177)the Research Start-up Funding of Fuzhou University(Grant Nos.XRC-23015,XRC-23064).
文摘Micron-sized graphene sheets have been introduced as additives to enhance the lubricating capabilities of water.The tribological characteristics of the lubricants after preparation and storage for 6 months were systematically analyzed.Results indicated that the friction coefficient and wear volume of the tribo-pair were reduced through the incorporation of a certain concentration of graphene sheets,and also have long-term storage stability.Notably,under the experimental conditions,a 0.2%mass concentration of graphene in the aqueous lubricant exhibited exceptional tribological performance and long-term storage stability,achieving an 80%reduction in friction coefficient and a 78%decrease in wear volume with a 14000-cycle friction test.Wear morphology analysis indicated that after adding graphene sheets to the aqueous solution,micro-plastic deformation occurs on the worn surface of the steel plate.The wear profile of the GCr15 counter ball changes from a circular profile to a rectangular-like profile.The main reason is that the graphene sheets in the aqueous solution can enter the contact interface during the friction process,hindering direct contact between the friction pair.The study prov-ides a simple method to improve the tribological properties of aqueous solutions stably for engineering applica-tions.
基金Research Start-Up Fund Project of Anhui Polytechnic University(S022023017)University Research Project of Anhui Province(2023AH050937)+1 种基金Anhui Polytechnic University Research Foundation for Introducing Talents(2022YQQ003)Anhui Province Key Laboratory of Intelligent Vehicle Chassis by Wire。
文摘Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.
基金The National Natural Science Foundation of China(No.52173077)the Liaoning Provincial Department of Education Series Project(No.LJKZ0187)+1 种基金Natural Science Foundation of Liaoning Province(No.2023-MS-239)Liaoning BaiQianWan Talents Program(No.2021921081)。
文摘In this study,a facile method was employed to synthesize strong,yet highly elastic polyurethane-urea(PUU)with typical characteristics and 94% optical transmittance.Graphene platelets(GNPs)were prepared and modified via a scalable and eco-friendly mechanochemical approach.The produced GNPs is at 1.6-nm thickness with high electrical conductivity of~950 S/m.The structure-property relations of PUU/GNP nanocomposites were comprehensively investigated through morphology and mechanical properties measurements.The strong interface and high-density hydrogen bonds between modified GNPs(M-GNPs)and PUU significantly enhanced the mechanical properties of the PUU nanocomposite.The PUU composite showed 66.7%and 36.2%increments in tensile and impact strengths,respectively,at 0.2 wt% M-GNPs.The reversible hydrogen bond between M-GNPs and PUU endowed the nanocomposite with self-healing properties achieving 97.8% healing efficiency of the strength after 5 h at 120℃.This study demonstrates the importance of surface modification and provides a simple yet robust approach for preparing high-performance and functional PUU/graphene composites.
基金supported by European Union's Horizon Europe,UK Research and Innovation(UKRI).
文摘Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.
基金supported by the Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project(No.2024ZD1003100)the National Key R&D Program of China(Grant No.2024YFC2813700)。
文摘With the convergence of sensor technology,artificial intelligence,and the Internet of Things,intelligent vibration monitoring systems are undergoing transformative development.This evolution imposes stringent demands on the miniaturization,low power consumption,high integration,and environmental adaptability of transducers.Graphene,renowned for its superlative physicochemical attributes,holds significant promise for application in micro-and nanoelectromechanical systems(M/NEMS).However,the inherent central symmetry of graphene restricts its utility in piezoelectric devices.Inspired by the sensilla trichoidea of spiders,a threedimensional(3D)cilia-like monolayer graphene omnidirectional vibration transducer(CGVT)based on a stress-induced self-assembly mechanism is fabricated,demonstrating notable performance and high-temperature resistance.Furthermore,3D vibration vector decoding is realized via an omnidirectional decoupling algorithm based on one-dimensional convolutional neural networks(1DCNN)to achieve precise discrimination of vibration directions.The 3D bionic vibration-sensing system incorporates a spider web structure into a bionic cilia MEMS chip through a gold wire bonding process,enabling the realization of three distinct mechanisms for vibration detection and recognition.In particular,these devices are manufactured using silicon-based semiconductor processing techniques and MEMS fabrication methodologies,leading to a substantial reduction in the dimensions of individual components compared to traditional counterparts.
基金the support from the National Natural Science Foundation of China(52473083,52373089,52403085)Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)+2 种基金the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57)Natural Science Basic Research Plan in Shaanxi Province of China(2024JC-YBMS-279)Natural Science Foundation of Chongqing,China(2023NSCQMSX2547)
文摘With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.
基金supported by the public welfare project(Normal Education Quality Improvement Plan)by the China Education Development Foundation(Grant No.TZJH202202)the National Natural Science Foundation of China(Grant No.12274370)。
文摘We numerically investigate the effect of in-plane bending strain on valley-resolved conductance and valley polarization in a graphene nanoribbon with zigzag edges.The central region of the nanoribbon is bent into an arc with central angleφ.We find that the bending strain reduces the conductance but enhances the valley polarization.In the valley-resolved conductance spectra,there exist single-valley plateaus near the Dirac points and distinct Fano-type dips.Accordingly,a plateau of full valley polarization appears,which expands significantly at largeφ.At valleyresolved conductance dips,the valley polarization can be much larger than that in the unstrained case.The bending-induced enhancement of valley polarization can be explained by the features of pseudo-Landau levels in the bent region.Strain-induced valley polarization depends nonmonotonously on the nanoribbon width.These findings could be helpful in designing valleytronic devices with flexibility.
文摘In this study,the multi-scale(meso and macro)modelling was used to predict the electric response of the material.Porosity was introduced through a sugar-templating process to enhance compressibility and sensitivity.Mean-field homogenization was employed to predict the electrical conductivity of the nanocomposites,which was validated experimentally through I–V characterisation,confirming stable Ohmic behavior.The homogenised material parameters were incorporated into COMSOLMultiphysics to simulate diaphragmdeflection and capacitance variation under applied pressure.Experimental results showed a linear and stable capacitance response at the force magnitude of 0–7 N.The Graphene nanoplatelets(GnP)–Polydimethylsiloxane(PDMS)sensor demonstrated superior sensitivity(0.0032 pF/N)compared to the CNT–PDMS sensor(0.0019 pF/N),attributed to improved filler dispersion and higher effective surface area of GnP.Finite element simulations were further conducted to evaluate stress distribution in a GnP–PDMS-based capacitive sensor integrated into a shoe insole for gait analysis.The results correlated well with experimental capacitance changes,validating the sensor’s mechanical reliability and pressure sensitivity.This comparative study establishes the GnP–PDMS composite as a more effective candidate for low-cost,biocompatible,and high-performance flexible pressure sensors in wearable biomedical and gait monitoring applications.
基金supported by Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korea Government(MOTIE)(RS-2022-00154720,Technology Innovation Program Development of next-generation power semiconductor based on Si-on-SiC structure)the National Research Foundation of Korea(NRF)by the Korea government(RS-2023-NR076826)Global-Learning&Academic Research Institution for Master's·PhD students,and Postdocs(LAMP)Program of the National Research Foundation of Korea(NRF)by the Ministry of Education(No.RS-2024-00443714).
文摘Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.
基金supported by National Natural Science Foundation of China(Grant No.12105239)the Science and Technology Projects of Henan Province(Grant No.232102310002).
文摘Early detection and treatment of colorectal cancer can effectively reduce the harm caused to patients.However,early symptoms are not obvious.Exosomes are extracellular vesicles that carry information between cells circulating in the human body.Despite the critical importance of tumor-derived exosomes for early cancer detection,prognosis,and treatment guidance,sensitive detection of exosomes remains challenging.We report a novel immunosensor for the detection of exosomes using graphene oxide(GO)/Au/Ag as the electrochemical sensing platform and spherical Au@PtPd porous nanoparticles to provide signal amplification.A large-surface-area GO/Au/Ag-modified screen-printed carbon electrode(SPCE)is used to immobilize CD63 aptamers.The prepared strawberry-like Au@PtPd demonstrates improved sensitivity and electrocatalytic activity with increasing aptamer load.Meanwhile,its good conductivity accelerates the electron transfer rate on the SPCE.The immunosensor exhibits a linear range(100–1.0×10^(6)exosomes·μl^(−1))and a detection limit of 23 exosomes·μl^(−1).Furthermore,its potential for the detection of exosomes provides a new clinical application for early diagnosis of colorectal tumors.
基金Funded by Hunan Provincial Natural Science Foundation(No.2023JJ40074)Hunan Provincial Education Department Excellent Youth Project(No.21B0757)Hunan Provincial Engineering Technology Center(No.2022TP2036)。
文摘In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires.Microstructure and property analyses in both the cold-drawn and annealed states show that the incorporation of graphene significantly improves the ductility and electrical conductivity of the copper wire.After annealing at 350℃ for 30 minutes,the composite wire demonstrates a tensile strength of 270 MPa and an electrical conductivity of 102.74%IACS,both superior to those of pure copper wire under identical conditions.At 150℃,the electrical conductivity of the annealed composite wire reaches 72.60%IACS,notably higher than the 68.19%IACS of pure copper.The results suggest that graphene is uniformly distributed within the composite wire,with minimal impact on conductivity,while effectively refining the copper grain structure to enhance ductility.Moreover,graphene suppresses copper lattice vibrations at elevated temperatures,reducing the rate of conductivity degradation.
文摘Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into porous,conductive graphene.This single-step laser writing approach enables flexible,patternable electrodes without complex post-processing.With its high conductivity,large surface area,and tunable chemistry,LIG is well-suited for diverse applications including batteries,supercapacitors,dyesensitized solar cells(DSSCs),dual cells,water-splitting electrocatalysis,and triboelectric nanogenerators(TENGs).In energy storage,LIG improves charge transport,buffer volume changes,and provides a robust framework,enhancing capacitance,cycling stability,and rate capability.Its catalytic activity is further boosted through heteroatom doping or transition-metal incorporation,achieving HER/OER performance comparable to noble metals.In DSSCs,LIG functions as a flexible,low-cost alternative to platinum counter electrodes,while in TENGs,its strong triboelectric response and mechanical durability enable integration into self-powered,wearable systems.Despite the immense recent progress in this field,challenges remain regarding the scalability,long-term operational stability,and interfacial engineering of LIGbased composites.Further exploration into multi-laser systems,substrate diversity,and synergistic composite architectures will be crucial to optimizing device performance and reliability.Nevertheless,the green,cost-efficient,rapid,and programmable synthesis of LIG poses it as a cornerstone potential building block material in the development of future sustainable and multifunctional energy systems.Throughout the review we compare fabrication strategies,summarize performance metrics against relevant benchmarks,and identifying common mechanistic advantages conferred by the laser writing process.Remaining challenges-such as scale-up,precursor diversity,long-term environmental stability,and integration into complex device architectures-are outlined alongside prospective research directions.Collectively,this review article provides an in-depth perspective on the multifunctional nature of LIG,underscoring its promise in next-generation energy storage,conversion,harvesting applications,and laying the groundwork for future research directions.
基金supported by Korea Electrotechnology Research Institute(KERI)Primary research program through the National Research Council of Science&Technology(NST)funded by the Ministry of Science and ICT(MSIT)(No.25A01015)by the Technology Innovation Program(20019091)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)by the National Research Council of Science&Technology(NST)grant from the Korea government(MSIT)(No.GTL24012-000).
文摘Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.
基金Funded by the Key Scientific and Technological Project of Zhejiang Provincial Administration for Market Regulation(No.ZD2024004)the National Natural Science Foundation of China(Nos.62304214 and 62304213)+2 种基金the Natural Science Foundation of Zhejiang Province(No.LQ23E020006)the Chunhui Project Foun-dation of the Education Department of China(No.HZKY20220198)the Fundamental Research Funds for the Provincial Universities of Zhejiang(Nos.2021YW35,2021YW36 and 2022YW62)。
文摘We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modified PTFE(PTFE-O)with graphene oxide(GO),enabling tight interactions between the two phases through hydrogen bonding and van der Waals forces.Comprehensive characterizations,including XPS,FTIR,SEM,and contact angle analysis,confirmed the successful surface modification and uniform dispersion of GO.The optimized PTFE-O/GO composite exhibits a low resistivity of 2.41×10^(3)Ω·cm under a compression pressure of 2 MPa,demonstrating markedly improved conductivity and antistatic performance.These findings provide an effective route for constructing conductive PTFE-based composites and offer new insights into interface-engineered antistatic polymer materials.
基金extend their gratitude to the Deanship of Scientific Research,Vice Presidency for Graduate Studies and Scientific Research,King Faisal University,Saudi Arabia,for funding the publication of this work under the Ambitious Researcher program(Project No.KFU253806).
文摘Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.
基金supported by the National Research Foundation of Korea(NRF)grants funded by the Korean government(MSIT)(RS-2024-00409952,RS-2024-00347936,and RS-202400407282)supported by the GRRC Program of Gyeonggi Province(GRRCHanyang2020-B01)supported by the Commercialization Promotion Agency for R&D Outcomes(COMPA)grant funded by the Korean Government(MSIT)(RS-2023-00304763)。
文摘The practical use of lithium metal anodes(LMAs)is impeded by uncontrolled dendrite growth,primarily caused by uneven Li-ion flux and significant volume changes during cycling.To overcome these challenges,we present binder-free holey wrinkled-multilayered graphene(HWMG)scaffolds for highperformance LMAs with long cycle life.Holey graphene oxide(HGO)sheets were restacked into particle-like holey wrinkled-multilayered graphene oxide(HWMGO)in a high-concentration GO suspension,in which few-layer HGOs were quickly stabilized and wrinkled during the drying process,and upon reduction,they transformed into HWMG.HWMG exhibited excellent adhesion due to chemical interactions via edge-located functional groups.Its particle-like morphology,with numerous nanopores and high porosity,conferred outstanding mechanical flexibility and low tortuosity,enabling uniform Li-ion flux,buffering volume expansion,and suppressing dendrite growth.As a result,excellent long-term stability over 800 cycles and a voltage hysteresis of ca.7 mV over 6000 h were realized for the HWMG scaffolds,and a high areal capacity of 3.34 mAh cm^(-2) at 0.3 C after 350 cycles was demonstrated in a full-cell configuration.This work promotes the practical application of LMAs by offering a scalable scaffold design that suppresses dendrites and enhances cycle life.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.52225207 and 52350001)the Shanghai Pilot Program for Basic Research–Fudan University 21TQ1400100(Grant No.21TQ006)the Shanghai Municipal Science and Technology Major Project(Grant No.2019SHZDZX01)。
文摘When two layers of graphene are stacked with a twist angle of approximately 1.1°,strong interlayer coupling gives rise to a pair of flat bands in twisted bilayer graphene(TBG),resulting in pronounced electron–electron interactions.At half filling of the flat bands,TBG exhibits correlated insulating states.Here,we investigate the electrical transport properties of heterostructures composed of TBG and the antiferromagnetic insulator chromium oxychloride(CrOCl),and propose a strategy to modulate the correlated insulating states in TBG.During the transition from a conventional phase to a strong interfacial coupling phase,kink-like features are observed in the charge neutrality point(CNP),correlated insulating state,and band insulating state.Under a perpendicular magnetic field,the system exhibits broadened quantum Hall plateaus in the strong interfacial coupling regime.Electrons localized in the CrOCl layer screen the bottom gate,rendering the carrier density in TBG less sensitive to variations in the bottom gate voltage.These phenomena are well captured by a charge-transfer model between TBG and CrOCl.Our results provide insights into the control of electronic correlations and topological states in graphene moirésystems via interfacial charge coupling.
