This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the c...This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the cure kinetics, from which the kinetic parameters and apparent activation energy were obtained. It turns out that with increasing graphene loading, the induction period of the vulcanization process of SBR is remarkably reduced at low graphene loading and then levels off; on the other hand, the optimum cure time shows a monotonous decrease. As a result, the vulcanization rate is suppressed at first and then accelerated, and the corresponding activation energy increases slightly at first and then decreases. Upon adding graphene, the crosslinking density of the nanocomposites increases, because graphene takes part in the vulcanization process.展开更多
This study presented the effect of the concentration of graphene in the dispersion,the type of polyvinyl alcohol(PVA)and the surfactant on the sensing properties of dip-coated graphene/spandex yarns as resistance stra...This study presented the effect of the concentration of graphene in the dispersion,the type of polyvinyl alcohol(PVA)and the surfactant on the sensing properties of dip-coated graphene/spandex yarns as resistance strain sensors.Experimental results showed that the addition of styrene-acrylic emulsion surfactant facilitates the dispersion of graphene and then improves the conductivity and sensing performance,and the sensitivity is up to 91.The conductivity and sensing properties of graphene/spandex yarns at 2%graphene dispersion are better than those at 1%graphene dispersion.When the conductive yarn treated by 2%graphene dispersion is stretched to 50%,the sensitivity is up to 29,the repeatability is good,and the hysteresis is low.In terms of the binding agent,PVA as a high alcoholysis and large polymerization decreases the sensitivity,repeatability as well as the hysteresis.展开更多
Electro-optic modulator is a key component for on-chip optical signal processing.An electro-optic phase modulator based on multilayer graphene embedded in silicon nitride waveguide is demonstrated to fulfill low-power...Electro-optic modulator is a key component for on-chip optical signal processing.An electro-optic phase modulator based on multilayer graphene embedded in silicon nitride waveguide is demonstrated to fulfill low-power operation.Finite element method is adopted to investigate the interaction enhancement between the graphene flake and the optical mode.The impact of multilayer graphene on the performance of phase modulator is studied comprehensively.Simulation results show that the modulation efficiency improves with the increment of graphene layer number,as well as the modulation length.The 3-dB bandwidth of around 48 GHz is independent of graphene layer number and length.Compared to modulator with two-or four-layer graphene,the six-layer graphene/silicon nitride waveguide modulator can realizeπphase shift at a low-power consumption of 14 fJ/bit when the modulation length is 240μm.展开更多
In order to clarify the edge and interface effect on the adhesion energy between graphene(Gr)and its substrate,a theoretical model is proposed to study the interaction and strain distribution of Gr/Si system in terms ...In order to clarify the edge and interface effect on the adhesion energy between graphene(Gr)and its substrate,a theoretical model is proposed to study the interaction and strain distribution of Gr/Si system in terms of continuum medium mechanics and nanothermodynamics.We find that the interface separation and adhesion energy are determined by the thickness of Gr and substrate.The disturbed interaction and redistributed strain in the Gr/Si system induced by the effect of surface and interface can make the interface adhesion energy decrease with increasing thickness of Gr and diminishing thickness of Si.Moreover,our results show that the smaller area of Gr is more likely to adhere to the substrate since the edge effect improves the active energy and strain energy.Our predictions can be expected to be a guide for designing high performance of Grbased electronic devices.展开更多
Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to t...Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.展开更多
Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon ...Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.展开更多
With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivit...With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.展开更多
Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic struct...Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.展开更多
In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires...In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires.Microstructure and property analyses in both the cold-drawn and annealed states show that the incorporation of graphene significantly improves the ductility and electrical conductivity of the copper wire.After annealing at 350℃ for 30 minutes,the composite wire demonstrates a tensile strength of 270 MPa and an electrical conductivity of 102.74%IACS,both superior to those of pure copper wire under identical conditions.At 150℃,the electrical conductivity of the annealed composite wire reaches 72.60%IACS,notably higher than the 68.19%IACS of pure copper.The results suggest that graphene is uniformly distributed within the composite wire,with minimal impact on conductivity,while effectively refining the copper grain structure to enhance ductility.Moreover,graphene suppresses copper lattice vibrations at elevated temperatures,reducing the rate of conductivity degradation.展开更多
Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artific...Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.展开更多
When two layers of graphene are stacked with a twist angle of approximately 1.1°,strong interlayer coupling gives rise to a pair of flat bands in twisted bilayer graphene(TBG),resulting in pronounced electron–el...When two layers of graphene are stacked with a twist angle of approximately 1.1°,strong interlayer coupling gives rise to a pair of flat bands in twisted bilayer graphene(TBG),resulting in pronounced electron–electron interactions.At half filling of the flat bands,TBG exhibits correlated insulating states.Here,we investigate the electrical transport properties of heterostructures composed of TBG and the antiferromagnetic insulator chromium oxychloride(CrOCl),and propose a strategy to modulate the correlated insulating states in TBG.During the transition from a conventional phase to a strong interfacial coupling phase,kink-like features are observed in the charge neutrality point(CNP),correlated insulating state,and band insulating state.Under a perpendicular magnetic field,the system exhibits broadened quantum Hall plateaus in the strong interfacial coupling regime.Electrons localized in the CrOCl layer screen the bottom gate,rendering the carrier density in TBG less sensitive to variations in the bottom gate voltage.These phenomena are well captured by a charge-transfer model between TBG and CrOCl.Our results provide insights into the control of electronic correlations and topological states in graphene moirésystems via interfacial charge coupling.展开更多
Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.B...Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.展开更多
This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and...This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.展开更多
Three-dimensional(3D)-printedgraphene aerogels hold promise for electromagneticwave absorption(EWA)engineering due to itsultralow density,outstanding electromagnetic dissipationwith the flexibility and precision of ma...Three-dimensional(3D)-printedgraphene aerogels hold promise for electromagneticwave absorption(EWA)engineering due to itsultralow density,outstanding electromagnetic dissipationwith the flexibility and precision of manufacturingstrategies.However,their high conductivitycauses severe impedance mismatch,limiting EWAperformance.3D printing requirements also constrainthe dielectric properties of printable grapheneinks,hindering the integration of high-performanceabsorbers with advanced manufacturing.This studyproposes a polyacrylic acid(PAA)gel-mediated3D porous graphene oxide(GO)aerogel multiscaleregulation strategy.Precise gel content control enablesdual-gradient tuning of the rheology(Benefitingdirect ink writing(DIW))and dielectric loss(Enhancing EWA)of GO/PAA composites and reduces aerogel density(6.9 mg cm^(-3)from28.2 mg cm^(-3)).Thermal reduction decomposes PAA into amorphous carbon nanoparticles anchored on reduced graphene oxide(rGO),enhancingimpedance matching and absorption via synergistic 0D/2D interfacial polarization and conductive loss.The optimized rGO/PAA aerogelachieves a minimum reflection loss(RL)of-39.86 dB at 2.5 mm and an effective absorption bandwidth(EAB)of 8.36 GHz(9.64-18 GHz)at3.2 mm.Combining DIW and this aerogel,we design a metamaterial absorber(MA)with dual material(dielectric loss)and structural gradients.This MA exhibits an ultrawide EAB of 14 GHz(4-18 GHz)with a total thickness of 7.8 mm.This work establishes a coupled design paradigmof“composition-structure-performance,”providing an engineerable solution for developing lightweight,broadband EWA materials.展开更多
In coal mining on a high-pressure Ordovician limestone aquifer,grouting materials should have sufficient mechanical properties,particularly strong interfacial bonding performance to address stress concentration at the...In coal mining on a high-pressure Ordovician limestone aquifer,grouting materials should have sufficient mechanical properties,particularly strong interfacial bonding performance to address stress concentration at the grout-limestone interface induced by rock stress disturbances during mining.In this study,graphene oxide(GO)was integrated into cement-polyacrylate composite grout to improve its interfacial bonding.First,four-point bending tests were conducted,and the Monte Carlo method combined with the simplex search algorithm was employed to determine the variations in shear cohesion and static friction parameters.The results reveal that GO can significantly increase both the tensile and shear cohesion of the grout-limestone interface,but minimally affects the interfacial friction coefficient.Second,nuclear magnetic resonance(NMR)and scanning electron microscopy(SEM)tests were performed.The results indicate that GO nanosheets result in a squamaceous microstructure of the grout consolidation mass,increasing the adhesion of the grout-limestone interface.Moreover,spiny Aft(ettringite)clusters can be induced in limestone fracture surfaces by GO,which could serve as anchors for limestone and grout consolidation mass.展开更多
Flexible electronics are transforming our lives by making daily activities more convenient.Central to this innovation are field-effect transistors(FETs),valued for their efficient signal processing,nanoscale fabricati...Flexible electronics are transforming our lives by making daily activities more convenient.Central to this innovation are field-effect transistors(FETs),valued for their efficient signal processing,nanoscale fabrication,low-power consumption,fast response times,and versatility.Graphene,known for its exceptional mechanical properties,high electron mobility,and biocompatibility,is an ideal material for FET channels and sensors.The combination of graphene and FETs has given rise to flexible graphene field-effect transistors(FGFETs),driving significant advances in flexible electronics and sparked a strong interest in flexible biomedical sensors.Here,we first provide a brief overview of the basic structure,operating mechanism,and evaluation parameters of FGFETs,and delve into their material selection and patterning techniques.The ability of FGFETs to sense strains and biomolecular charges opens up diverse application possibilities.We specifically analyze the latest strategies for integrating FGFETs into wearable and implantable flexible biomedical sensors,focusing on the key aspects of constructing high-quality flexible biomedical sensors.Finally,we discuss the current challenges and prospects of FGFETs and their applications in biomedical sensors.This review will provide valuable insights and inspiration for ongoing research to improve the quality of FGFETs and broaden their application prospects in flexible biomedical sensing.展开更多
With vigorous developments in nanotechnology,the elaborate regulation of microstructure shows attractive potential in the design of electromagnetic wave absorbers.Herein,a hierarchical porous structure and composite h...With vigorous developments in nanotechnology,the elaborate regulation of microstructure shows attractive potential in the design of electromagnetic wave absorbers.Herein,a hierarchical porous structure and composite heterogeneous interface are constructed successfully to optimize the electromagnetic loss capacity.The macro–micro-synergistic graphene aerogel formed by the ice template‑assisted 3D printing strategy is cut by silicon carbide nanowires(SiC_(nws))grown in situ,while boron nitride(BN)interfacial structure is introduced on graphene nanoplates.The unique composite structure forces multiple scattering of incident EMWs,ensuring the combined effects of interfacial polarization,conduction networks,and magnetic-dielectric synergy.Therefore,the as-prepared composites present a minimum reflection loss value of−37.8 dB and a wide effective absorption bandwidth(EAB)of 9.2 GHz(from 8.8 to 18.0 GHz)at 2.5 mm.Besides,relying on the intrinsic high-temperature resistance of SiC_(nws) and BN,the EAB also remains above 5.0 GHz after annealing in air environment at 600℃ for 10 h.展开更多
The preparation of carbon-based electromagnetic wave(EMW)absorbers possessing thin matching thickness,wide absorption bandwidth,strong absorption intensity,and low filling ratio remains a huge challenge.Metal-organic ...The preparation of carbon-based electromagnetic wave(EMW)absorbers possessing thin matching thickness,wide absorption bandwidth,strong absorption intensity,and low filling ratio remains a huge challenge.Metal-organic frameworks(MOFs)are ideal self-sacrificing templates for the construction of carbon-based EMW absorbers.In this work,bimetallic FeMn-MOF-derived MnFe_(2)O_(4)/C/graphene composites were fabricated via a two-step route of solvothermal reaction and the following pyrolysis treatment.The results re-veal the evolution of the microscopic morphology of carbon skeletons from loofah-like to octahedral and then to polyhedron and pomegran-ate after the adjustment of the Fe^(3+)to Mn^(2+)molar ratio.Furthermore,at the Fe^(3+)to Mn^(2+)molar ratio of 2:1,the obtained MnFe_(2)O_(4)/C/graphene composite exhibited the highest EMW absorption capacity.Specifically,a minimum reflection loss of-72.7 dB and a max-imum effective absorption bandwidth of 5.1 GHz were achieved at a low filling ratio of 10wt%.In addition,the possible EMW absorp-tion mechanism of MnFe_(2)O_(4)/C/graphene composites was proposed.Therefore,the results of this work will contribute to the construction of broadband and efficient carbon-based EMW absorbers derived from MOFs.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51203096)the Ph.D.Programs Foundation of Ministry of Education of China(No.20100181120020)Sichuan University
文摘This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the cure kinetics, from which the kinetic parameters and apparent activation energy were obtained. It turns out that with increasing graphene loading, the induction period of the vulcanization process of SBR is remarkably reduced at low graphene loading and then levels off; on the other hand, the optimum cure time shows a monotonous decrease. As a result, the vulcanization rate is suppressed at first and then accelerated, and the corresponding activation energy increases slightly at first and then decreases. Upon adding graphene, the crosslinking density of the nanocomposites increases, because graphene takes part in the vulcanization process.
基金Biomedical Textile Material Science and Technology,China(111 Project)(No.B07024)
文摘This study presented the effect of the concentration of graphene in the dispersion,the type of polyvinyl alcohol(PVA)and the surfactant on the sensing properties of dip-coated graphene/spandex yarns as resistance strain sensors.Experimental results showed that the addition of styrene-acrylic emulsion surfactant facilitates the dispersion of graphene and then improves the conductivity and sensing performance,and the sensitivity is up to 91.The conductivity and sensing properties of graphene/spandex yarns at 2%graphene dispersion are better than those at 1%graphene dispersion.When the conductive yarn treated by 2%graphene dispersion is stretched to 50%,the sensitivity is up to 29,the repeatability is good,and the hysteresis is low.In terms of the binding agent,PVA as a high alcoholysis and large polymerization decreases the sensitivity,repeatability as well as the hysteresis.
基金the National Key Research and Development Program of China(Grant No.2019YFB2203001)the National Natural Science Foundation of China(Grant Nos.61675087,61875069,and 61605057)the Science and Technology Development Plan of Jilin Province,China(Grant No.JJKH20190118KJ).
文摘Electro-optic modulator is a key component for on-chip optical signal processing.An electro-optic phase modulator based on multilayer graphene embedded in silicon nitride waveguide is demonstrated to fulfill low-power operation.Finite element method is adopted to investigate the interaction enhancement between the graphene flake and the optical mode.The impact of multilayer graphene on the performance of phase modulator is studied comprehensively.Simulation results show that the modulation efficiency improves with the increment of graphene layer number,as well as the modulation length.The 3-dB bandwidth of around 48 GHz is independent of graphene layer number and length.Compared to modulator with two-or four-layer graphene,the six-layer graphene/silicon nitride waveguide modulator can realizeπphase shift at a low-power consumption of 14 fJ/bit when the modulation length is 240μm.
基金This work was supported by the Natural Science Foundation of Guangdong Province(Grant Nos.2019A1515010916 and 2018A030307028)the Featured Innovation Project of Guangdong Education Department(2018KTSCX150)+1 种基金the Maoming Natural Science Foundation of Guangdong,China,(Grant No.2019018001)the Guangdong Province Major Foundation of Fundamental Research(Grant No.517042).
文摘In order to clarify the edge and interface effect on the adhesion energy between graphene(Gr)and its substrate,a theoretical model is proposed to study the interaction and strain distribution of Gr/Si system in terms of continuum medium mechanics and nanothermodynamics.We find that the interface separation and adhesion energy are determined by the thickness of Gr and substrate.The disturbed interaction and redistributed strain in the Gr/Si system induced by the effect of surface and interface can make the interface adhesion energy decrease with increasing thickness of Gr and diminishing thickness of Si.Moreover,our results show that the smaller area of Gr is more likely to adhere to the substrate since the edge effect improves the active energy and strain energy.Our predictions can be expected to be a guide for designing high performance of Grbased electronic devices.
基金Research Start-Up Fund Project of Anhui Polytechnic University(S022023017)University Research Project of Anhui Province(2023AH050937)+1 种基金Anhui Polytechnic University Research Foundation for Introducing Talents(2022YQQ003)Anhui Province Key Laboratory of Intelligent Vehicle Chassis by Wire。
文摘Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.
基金supported by European Union's Horizon Europe,UK Research and Innovation(UKRI).
文摘Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.
基金the support from the National Natural Science Foundation of China(52473083,52373089,52403085)Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)+2 种基金the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57)Natural Science Basic Research Plan in Shaanxi Province of China(2024JC-YBMS-279)Natural Science Foundation of Chongqing,China(2023NSCQMSX2547)
文摘With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.
基金supported by Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korea Government(MOTIE)(RS-2022-00154720,Technology Innovation Program Development of next-generation power semiconductor based on Si-on-SiC structure)the National Research Foundation of Korea(NRF)by the Korea government(RS-2023-NR076826)Global-Learning&Academic Research Institution for Master's·PhD students,and Postdocs(LAMP)Program of the National Research Foundation of Korea(NRF)by the Ministry of Education(No.RS-2024-00443714).
文摘Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.
基金Funded by Hunan Provincial Natural Science Foundation(No.2023JJ40074)Hunan Provincial Education Department Excellent Youth Project(No.21B0757)Hunan Provincial Engineering Technology Center(No.2022TP2036)。
文摘In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires.Microstructure and property analyses in both the cold-drawn and annealed states show that the incorporation of graphene significantly improves the ductility and electrical conductivity of the copper wire.After annealing at 350℃ for 30 minutes,the composite wire demonstrates a tensile strength of 270 MPa and an electrical conductivity of 102.74%IACS,both superior to those of pure copper wire under identical conditions.At 150℃,the electrical conductivity of the annealed composite wire reaches 72.60%IACS,notably higher than the 68.19%IACS of pure copper.The results suggest that graphene is uniformly distributed within the composite wire,with minimal impact on conductivity,while effectively refining the copper grain structure to enhance ductility.Moreover,graphene suppresses copper lattice vibrations at elevated temperatures,reducing the rate of conductivity degradation.
基金extend their gratitude to the Deanship of Scientific Research,Vice Presidency for Graduate Studies and Scientific Research,King Faisal University,Saudi Arabia,for funding the publication of this work under the Ambitious Researcher program(Project No.KFU253806).
文摘Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.52225207 and 52350001)the Shanghai Pilot Program for Basic Research–Fudan University 21TQ1400100(Grant No.21TQ006)the Shanghai Municipal Science and Technology Major Project(Grant No.2019SHZDZX01)。
文摘When two layers of graphene are stacked with a twist angle of approximately 1.1°,strong interlayer coupling gives rise to a pair of flat bands in twisted bilayer graphene(TBG),resulting in pronounced electron–electron interactions.At half filling of the flat bands,TBG exhibits correlated insulating states.Here,we investigate the electrical transport properties of heterostructures composed of TBG and the antiferromagnetic insulator chromium oxychloride(CrOCl),and propose a strategy to modulate the correlated insulating states in TBG.During the transition from a conventional phase to a strong interfacial coupling phase,kink-like features are observed in the charge neutrality point(CNP),correlated insulating state,and band insulating state.Under a perpendicular magnetic field,the system exhibits broadened quantum Hall plateaus in the strong interfacial coupling regime.Electrons localized in the CrOCl layer screen the bottom gate,rendering the carrier density in TBG less sensitive to variations in the bottom gate voltage.These phenomena are well captured by a charge-transfer model between TBG and CrOCl.Our results provide insights into the control of electronic correlations and topological states in graphene moirésystems via interfacial charge coupling.
基金supported by the National Natural Science Foundation of China(52276196)the Foundation of State Key Laboratory of Coal Combustion(FSKLCCA2508)the High-level Talent Foundation of Anhui Agricultural University(rc412307).
文摘Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.
基金supported by the National Natural Science Foundation of China(Nos.52471156,U20A20274,and 52071158)the China Postdoctoral Science Foundation(Nos.2024M751173 and 2024M752703)+1 种基金the Jiangsu Funding Program for Excellent Postdoctoral Talent,China(No.2024ZB229)the Natural Science Foundation of Jiangsu Higher Education Institutions,China(No.24KJB430012).
文摘This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.
基金supported by ZJNSF LZ25E030006Zhejiang Provincial Key Research and Development Program(2024C01157)+2 种基金NSFC under Grant Nos.52473267 and 52401249the National Key Research and Development Program of China under Grant No.2021YFB3501504Zhejiang University Ningbo“Five in One”Campus Project(K-20213539)。
文摘Three-dimensional(3D)-printedgraphene aerogels hold promise for electromagneticwave absorption(EWA)engineering due to itsultralow density,outstanding electromagnetic dissipationwith the flexibility and precision of manufacturingstrategies.However,their high conductivitycauses severe impedance mismatch,limiting EWAperformance.3D printing requirements also constrainthe dielectric properties of printable grapheneinks,hindering the integration of high-performanceabsorbers with advanced manufacturing.This studyproposes a polyacrylic acid(PAA)gel-mediated3D porous graphene oxide(GO)aerogel multiscaleregulation strategy.Precise gel content control enablesdual-gradient tuning of the rheology(Benefitingdirect ink writing(DIW))and dielectric loss(Enhancing EWA)of GO/PAA composites and reduces aerogel density(6.9 mg cm^(-3)from28.2 mg cm^(-3)).Thermal reduction decomposes PAA into amorphous carbon nanoparticles anchored on reduced graphene oxide(rGO),enhancingimpedance matching and absorption via synergistic 0D/2D interfacial polarization and conductive loss.The optimized rGO/PAA aerogelachieves a minimum reflection loss(RL)of-39.86 dB at 2.5 mm and an effective absorption bandwidth(EAB)of 8.36 GHz(9.64-18 GHz)at3.2 mm.Combining DIW and this aerogel,we design a metamaterial absorber(MA)with dual material(dielectric loss)and structural gradients.This MA exhibits an ultrawide EAB of 14 GHz(4-18 GHz)with a total thickness of 7.8 mm.This work establishes a coupled design paradigmof“composition-structure-performance,”providing an engineerable solution for developing lightweight,broadband EWA materials.
基金supported by the National Key R&D Program of China(Grant Nos.U25A20810 and 2024YFF0508201)the National Natural Science Foundation of China(Grant No.12302504).
文摘In coal mining on a high-pressure Ordovician limestone aquifer,grouting materials should have sufficient mechanical properties,particularly strong interfacial bonding performance to address stress concentration at the grout-limestone interface induced by rock stress disturbances during mining.In this study,graphene oxide(GO)was integrated into cement-polyacrylate composite grout to improve its interfacial bonding.First,four-point bending tests were conducted,and the Monte Carlo method combined with the simplex search algorithm was employed to determine the variations in shear cohesion and static friction parameters.The results reveal that GO can significantly increase both the tensile and shear cohesion of the grout-limestone interface,but minimally affects the interfacial friction coefficient.Second,nuclear magnetic resonance(NMR)and scanning electron microscopy(SEM)tests were performed.The results indicate that GO nanosheets result in a squamaceous microstructure of the grout consolidation mass,increasing the adhesion of the grout-limestone interface.Moreover,spiny Aft(ettringite)clusters can be induced in limestone fracture surfaces by GO,which could serve as anchors for limestone and grout consolidation mass.
基金supported by the National Key R&D Plan of China(Grant No.2023YFB3210400)the National Natural Science Foundation of China(No.62174101)+2 种基金the Major Scientific and Technological Innovation Project of Shandong Province(2021CXGC010603)the Fundamental Research Funds of Shandong University(2020QNQT001)Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong,Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong,the Natural Science Foundation of Qingdao-Original exploration project(No.24-4-4-zrjj-139-jch).
文摘Flexible electronics are transforming our lives by making daily activities more convenient.Central to this innovation are field-effect transistors(FETs),valued for their efficient signal processing,nanoscale fabrication,low-power consumption,fast response times,and versatility.Graphene,known for its exceptional mechanical properties,high electron mobility,and biocompatibility,is an ideal material for FET channels and sensors.The combination of graphene and FETs has given rise to flexible graphene field-effect transistors(FGFETs),driving significant advances in flexible electronics and sparked a strong interest in flexible biomedical sensors.Here,we first provide a brief overview of the basic structure,operating mechanism,and evaluation parameters of FGFETs,and delve into their material selection and patterning techniques.The ability of FGFETs to sense strains and biomolecular charges opens up diverse application possibilities.We specifically analyze the latest strategies for integrating FGFETs into wearable and implantable flexible biomedical sensors,focusing on the key aspects of constructing high-quality flexible biomedical sensors.Finally,we discuss the current challenges and prospects of FGFETs and their applications in biomedical sensors.This review will provide valuable insights and inspiration for ongoing research to improve the quality of FGFETs and broaden their application prospects in flexible biomedical sensing.
基金sponsored by National Natural Science Foundation of China(No.52302121,No.52203386)Shanghai Sailing Program(No.23YF1454700)+1 种基金Shanghai Natural Science Foundation(No.23ZR1472700)Shanghai Post-doctoral Excellent Program(No.2022664).
文摘With vigorous developments in nanotechnology,the elaborate regulation of microstructure shows attractive potential in the design of electromagnetic wave absorbers.Herein,a hierarchical porous structure and composite heterogeneous interface are constructed successfully to optimize the electromagnetic loss capacity.The macro–micro-synergistic graphene aerogel formed by the ice template‑assisted 3D printing strategy is cut by silicon carbide nanowires(SiC_(nws))grown in situ,while boron nitride(BN)interfacial structure is introduced on graphene nanoplates.The unique composite structure forces multiple scattering of incident EMWs,ensuring the combined effects of interfacial polarization,conduction networks,and magnetic-dielectric synergy.Therefore,the as-prepared composites present a minimum reflection loss value of−37.8 dB and a wide effective absorption bandwidth(EAB)of 9.2 GHz(from 8.8 to 18.0 GHz)at 2.5 mm.Besides,relying on the intrinsic high-temperature resistance of SiC_(nws) and BN,the EAB also remains above 5.0 GHz after annealing in air environment at 600℃ for 10 h.
基金supported by the Natural Science Research Project of the Anhui Educational Committee,China(No.2022AH050827)the Open Research Fund Program of Anhui Province Key Laboratory of Specialty Polymers,Anhui University of Science and Technology,China(No.AHKLSP23-12)the Joint National-Local Engineering Research Center for Safe and Precise Coal Mining Fund,China(No.EC2022020)。
文摘The preparation of carbon-based electromagnetic wave(EMW)absorbers possessing thin matching thickness,wide absorption bandwidth,strong absorption intensity,and low filling ratio remains a huge challenge.Metal-organic frameworks(MOFs)are ideal self-sacrificing templates for the construction of carbon-based EMW absorbers.In this work,bimetallic FeMn-MOF-derived MnFe_(2)O_(4)/C/graphene composites were fabricated via a two-step route of solvothermal reaction and the following pyrolysis treatment.The results re-veal the evolution of the microscopic morphology of carbon skeletons from loofah-like to octahedral and then to polyhedron and pomegran-ate after the adjustment of the Fe^(3+)to Mn^(2+)molar ratio.Furthermore,at the Fe^(3+)to Mn^(2+)molar ratio of 2:1,the obtained MnFe_(2)O_(4)/C/graphene composite exhibited the highest EMW absorption capacity.Specifically,a minimum reflection loss of-72.7 dB and a max-imum effective absorption bandwidth of 5.1 GHz were achieved at a low filling ratio of 10wt%.In addition,the possible EMW absorp-tion mechanism of MnFe_(2)O_(4)/C/graphene composites was proposed.Therefore,the results of this work will contribute to the construction of broadband and efficient carbon-based EMW absorbers derived from MOFs.
