Manipulating unintentional doping in graphene layers, which is influenced by environmental factors and supporting substrates, is of significant concern for the performance and advancement of graphene-based devices. In...Manipulating unintentional doping in graphene layers, which is influenced by environmental factors and supporting substrates, is of significant concern for the performance and advancement of graphene-based devices. In this context,laser-induced tuning of charge carriers in graphene facilitates the exploration of graphene's properties in relation to its surroundings and enables laser-assisted functionalization. This has the potential to advance optoelectronic devices that utilize graphene on transparent dielectric substrates, such as Al_(2)O_(3). In this work, laser power(PL) in Raman spectroscopy is used as a convenient contactless tool to manipulate and control unintentional carrier concentration and Fermi level position(EF) in graphene/α-Al_(2)O_(3)(G/Al_(2)O_(3)) under ambient conditions. Samples are annealed at 400℃ for two hours in an(Ar + H_(2)) atmosphere to remove any chemical residues. Analysis of the peak frequency(ω) and full width at half maximum(Γ) of the G and 2D bands show that G/Al_(2)O_(3) layers initially exhibit p-type doping, with EF located at ~100 me V below its Dirac charge-neutral point(DCNP). Increasing P_(L) results in effective carrier manipulation and raises E_F above DCNP. No significant internal stress is produced due to P_(L), as inferred from the strain-sensitive G^(*) band of graphene. Raman analysis of three successive cycles reveals hysteretic behavior from cycle to cycle, which is commonly reported to be limited by the type and density of the existing unintentional doping. Because of the ubiquitous nature of unintentional doping in graphene,manipulating it using contactless laser power to realize the desired graphene properties would be one of the best available practical approaches.展开更多
A graphene/AlGaN deep-ultraviolet(UV)photodetector is presented with ultrahigh responsivity of 3.4×105 A/W at 261 nm incident wavelength and 149 pW light power.A gain mechanism based on electron trapping at the p...A graphene/AlGaN deep-ultraviolet(UV)photodetector is presented with ultrahigh responsivity of 3.4×105 A/W at 261 nm incident wavelength and 149 pW light power.A gain mechanism based on electron trapping at the potential well is proposed to be responsible for the high responsivity.To optimize the trade-off between responsivity and response speed,a back-gate electrode is designed at the AlGaN/GaN two-dimensional electron gas(2DEG)area which eliminates the persistent photocurrent effect and shortens the recovery time from several hours to milliseconds.The 2DEG gate is proposed as an alternative way to apply the back gate electrode on AlGaN based devices on insulating substrates.This work sheds light on a possible way for weak deep-UV light detection.展开更多
Graphene-reinforced aluminum （AI） matrix composites were successfully prepared via solution mixing and powder metallurgy in this study. The mechanical properties of the composites were studied using microhardness an...Graphene-reinforced aluminum （AI） matrix composites were successfully prepared via solution mixing and powder metallurgy in this study. The mechanical properties of the composites were studied using microhardness and tensile tests. Compared to the pure Al alloy, the graphene/Al composites showed increased strength and hardness. A tensile strength of 255 MPa was achieved for the graphene/Al com- posite with only 0.3wt% graphene, which has a 25% increase over the tensile strength of the pure Al matrix. Raman spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to investigate the morphol- ogies, chemical compositions, and microstructures of the graphene and the graphene/A1 composites. On the basis of fractographic evidence, a relevant fracture mechanism is proposed.展开更多
The structural deterioration caused by the relatively weak out-of-plane bending stiffness and the chemically-active edge area of graphene limits its outperformance in strengthening for Al matrix composites(AMCs).Intro...The structural deterioration caused by the relatively weak out-of-plane bending stiffness and the chemically-active edge area of graphene limits its outperformance in strengthening for Al matrix composites(AMCs).Introducing one-dimensional(1D)carbon nanotubes(CNTs)to graphene/metal system is one of the promised strategies to complement the weakness of 2D graphene and make full use of the outstanding intrinsic properties of the both reinforcements.To date,such synergistic strengthening and toughening mechanisms are largely unknown.In this study,AMCs reinforced by a novel hybrid reinforcement,i.e.,graphene nanosheets decorated with Cu nanoparticles and CNTs(Cu@GNS-CNTs),are fabricated by an in-situ synthesis method.The combined contrast experiments validated that the organically integrated reinforcing structure promotes the intrinsic load bearing capacity of GNS and the strain hardening capability of the Al matrix simultaneously.As a result,the composites achieved excellent tensile strength and uniform elongation with almost no loss.The strengthening mechanism originated primarily from the hybrid reinforcement exhibits superior load-transfer,fracture inhibition and dislocation storage capability by controlling the interface reaction to construct an effective interface structure without damaging the reinforcement.Our work identifies a promising structural modification strategy for 2D materials and provides mechanistic insights into the synergistic strengthening effect of graphene/CNTs hybrid reinforcement.展开更多
This study investigates the fabrication and characterization of Al alloy matrix composites reinforced with graphene oxide(GO) using accumulative roll bonding(ARB).The annealed Al 6061 sheets were processed through 5-p...This study investigates the fabrication and characterization of Al alloy matrix composites reinforced with graphene oxide(GO) using accumulative roll bonding(ARB).The annealed Al 6061 sheets were processed through 5-pass ARB with GO reinforcement applied during the initial passes.Scanning electron microscopy revealed effective mitigation of GO agglomeration and improved interface bonding due to microscale material mixing.Raman spectroscopy confirmed the strong interaction between GO and the Al alloy matrix,as evidenced by the increased D band intensities and enhanced 2D band symmetry.Mechanical testing indicated an approximately 338.37% increase in yield strength(YS)and 86.42%improvement in hardness for the ARB-processed(ARBed)Al 6061/GO composite(0.2wt%)compared with annealed Al 6061 and an approximately 14.15%increase in YS and 17.23%improvement in hardness for the ARBedAl/GO composite(0.2wt%)compared with unreinforced ARBed Al 6061 specimens after five passes.X-ray diffraction analysis indicated an increased dislocation density,corroborating the observed enhancements in mechanical properties.Fracture surface analysis revealed reduced elongation with deep dimples,highlighting the tradeoff between strength and ductility.These results demonstrate the effectiveness of ARB for integrating GO into the Al 6061 matrix to improve the mechanical performance and interfacial bonding and underscore its potential for advanced composite materials.展开更多
Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to t...Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.展开更多
In this study,a facile method was employed to synthesize strong,yet highly elastic polyurethane-urea(PUU)with typical characteristics and 94% optical transmittance.Graphene platelets(GNPs)were prepared and modified vi...In this study,a facile method was employed to synthesize strong,yet highly elastic polyurethane-urea(PUU)with typical characteristics and 94% optical transmittance.Graphene platelets(GNPs)were prepared and modified via a scalable and eco-friendly mechanochemical approach.The produced GNPs is at 1.6-nm thickness with high electrical conductivity of~950 S/m.The structure-property relations of PUU/GNP nanocomposites were comprehensively investigated through morphology and mechanical properties measurements.The strong interface and high-density hydrogen bonds between modified GNPs(M-GNPs)and PUU significantly enhanced the mechanical properties of the PUU nanocomposite.The PUU composite showed 66.7%and 36.2%increments in tensile and impact strengths,respectively,at 0.2 wt% M-GNPs.The reversible hydrogen bond between M-GNPs and PUU endowed the nanocomposite with self-healing properties achieving 97.8% healing efficiency of the strength after 5 h at 120℃.This study demonstrates the importance of surface modification and provides a simple yet robust approach for preparing high-performance and functional PUU/graphene composites.展开更多
Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon ...Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.展开更多
With the convergence of sensor technology,artificial intelligence,and the Internet of Things,intelligent vibration monitoring systems are undergoing transformative development.This evolution imposes stringent demands ...With the convergence of sensor technology,artificial intelligence,and the Internet of Things,intelligent vibration monitoring systems are undergoing transformative development.This evolution imposes stringent demands on the miniaturization,low power consumption,high integration,and environmental adaptability of transducers.Graphene,renowned for its superlative physicochemical attributes,holds significant promise for application in micro-and nanoelectromechanical systems(M/NEMS).However,the inherent central symmetry of graphene restricts its utility in piezoelectric devices.Inspired by the sensilla trichoidea of spiders,a threedimensional(3D)cilia-like monolayer graphene omnidirectional vibration transducer(CGVT)based on a stress-induced self-assembly mechanism is fabricated,demonstrating notable performance and high-temperature resistance.Furthermore,3D vibration vector decoding is realized via an omnidirectional decoupling algorithm based on one-dimensional convolutional neural networks(1DCNN)to achieve precise discrimination of vibration directions.The 3D bionic vibration-sensing system incorporates a spider web structure into a bionic cilia MEMS chip through a gold wire bonding process,enabling the realization of three distinct mechanisms for vibration detection and recognition.In particular,these devices are manufactured using silicon-based semiconductor processing techniques and MEMS fabrication methodologies,leading to a substantial reduction in the dimensions of individual components compared to traditional counterparts.展开更多
With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivit...With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.展开更多
We numerically investigate the effect of in-plane bending strain on valley-resolved conductance and valley polarization in a graphene nanoribbon with zigzag edges.The central region of the nanoribbon is bent into an a...We numerically investigate the effect of in-plane bending strain on valley-resolved conductance and valley polarization in a graphene nanoribbon with zigzag edges.The central region of the nanoribbon is bent into an arc with central angleφ.We find that the bending strain reduces the conductance but enhances the valley polarization.In the valley-resolved conductance spectra,there exist single-valley plateaus near the Dirac points and distinct Fano-type dips.Accordingly,a plateau of full valley polarization appears,which expands significantly at largeφ.At valleyresolved conductance dips,the valley polarization can be much larger than that in the unstrained case.The bending-induced enhancement of valley polarization can be explained by the features of pseudo-Landau levels in the bent region.Strain-induced valley polarization depends nonmonotonously on the nanoribbon width.These findings could be helpful in designing valleytronic devices with flexibility.展开更多
In this study,the multi-scale(meso and macro)modelling was used to predict the electric response of the material.Porosity was introduced through a sugar-templating process to enhance compressibility and sensitivity.Me...In this study,the multi-scale(meso and macro)modelling was used to predict the electric response of the material.Porosity was introduced through a sugar-templating process to enhance compressibility and sensitivity.Mean-field homogenization was employed to predict the electrical conductivity of the nanocomposites,which was validated experimentally through I–V characterisation,confirming stable Ohmic behavior.The homogenised material parameters were incorporated into COMSOLMultiphysics to simulate diaphragmdeflection and capacitance variation under applied pressure.Experimental results showed a linear and stable capacitance response at the force magnitude of 0–7 N.The Graphene nanoplatelets(GnP)–Polydimethylsiloxane(PDMS)sensor demonstrated superior sensitivity(0.0032 pF/N)compared to the CNT–PDMS sensor(0.0019 pF/N),attributed to improved filler dispersion and higher effective surface area of GnP.Finite element simulations were further conducted to evaluate stress distribution in a GnP–PDMS-based capacitive sensor integrated into a shoe insole for gait analysis.The results correlated well with experimental capacitance changes,validating the sensor’s mechanical reliability and pressure sensitivity.This comparative study establishes the GnP–PDMS composite as a more effective candidate for low-cost,biocompatible,and high-performance flexible pressure sensors in wearable biomedical and gait monitoring applications.展开更多
Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into por...Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into porous,conductive graphene.This single-step laser writing approach enables flexible,patternable electrodes without complex post-processing.With its high conductivity,large surface area,and tunable chemistry,LIG is well-suited for diverse applications including batteries,supercapacitors,dyesensitized solar cells(DSSCs),dual cells,water-splitting electrocatalysis,and triboelectric nanogenerators(TENGs).In energy storage,LIG improves charge transport,buffer volume changes,and provides a robust framework,enhancing capacitance,cycling stability,and rate capability.Its catalytic activity is further boosted through heteroatom doping or transition-metal incorporation,achieving HER/OER performance comparable to noble metals.In DSSCs,LIG functions as a flexible,low-cost alternative to platinum counter electrodes,while in TENGs,its strong triboelectric response and mechanical durability enable integration into self-powered,wearable systems.Despite the immense recent progress in this field,challenges remain regarding the scalability,long-term operational stability,and interfacial engineering of LIGbased composites.Further exploration into multi-laser systems,substrate diversity,and synergistic composite architectures will be crucial to optimizing device performance and reliability.Nevertheless,the green,cost-efficient,rapid,and programmable synthesis of LIG poses it as a cornerstone potential building block material in the development of future sustainable and multifunctional energy systems.Throughout the review we compare fabrication strategies,summarize performance metrics against relevant benchmarks,and identifying common mechanistic advantages conferred by the laser writing process.Remaining challenges-such as scale-up,precursor diversity,long-term environmental stability,and integration into complex device architectures-are outlined alongside prospective research directions.Collectively,this review article provides an in-depth perspective on the multifunctional nature of LIG,underscoring its promise in next-generation energy storage,conversion,harvesting applications,and laying the groundwork for future research directions.展开更多
Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,...Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.展开更多
The practical use of lithium metal anodes(LMAs)is impeded by uncontrolled dendrite growth,primarily caused by uneven Li-ion flux and significant volume changes during cycling.To overcome these challenges,we present bi...The practical use of lithium metal anodes(LMAs)is impeded by uncontrolled dendrite growth,primarily caused by uneven Li-ion flux and significant volume changes during cycling.To overcome these challenges,we present binder-free holey wrinkled-multilayered graphene(HWMG)scaffolds for highperformance LMAs with long cycle life.Holey graphene oxide(HGO)sheets were restacked into particle-like holey wrinkled-multilayered graphene oxide(HWMGO)in a high-concentration GO suspension,in which few-layer HGOs were quickly stabilized and wrinkled during the drying process,and upon reduction,they transformed into HWMG.HWMG exhibited excellent adhesion due to chemical interactions via edge-located functional groups.Its particle-like morphology,with numerous nanopores and high porosity,conferred outstanding mechanical flexibility and low tortuosity,enabling uniform Li-ion flux,buffering volume expansion,and suppressing dendrite growth.As a result,excellent long-term stability over 800 cycles and a voltage hysteresis of ca.7 mV over 6000 h were realized for the HWMG scaffolds,and a high areal capacity of 3.34 mAh cm^(-2) at 0.3 C after 350 cycles was demonstrated in a full-cell configuration.This work promotes the practical application of LMAs by offering a scalable scaffold design that suppresses dendrites and enhances cycle life.展开更多
When two layers of graphene are stacked with a twist angle of approximately 1.1°,strong interlayer coupling gives rise to a pair of flat bands in twisted bilayer graphene(TBG),resulting in pronounced electron–el...When two layers of graphene are stacked with a twist angle of approximately 1.1°,strong interlayer coupling gives rise to a pair of flat bands in twisted bilayer graphene(TBG),resulting in pronounced electron–electron interactions.At half filling of the flat bands,TBG exhibits correlated insulating states.Here,we investigate the electrical transport properties of heterostructures composed of TBG and the antiferromagnetic insulator chromium oxychloride(CrOCl),and propose a strategy to modulate the correlated insulating states in TBG.During the transition from a conventional phase to a strong interfacial coupling phase,kink-like features are observed in the charge neutrality point(CNP),correlated insulating state,and band insulating state.Under a perpendicular magnetic field,the system exhibits broadened quantum Hall plateaus in the strong interfacial coupling regime.Electrons localized in the CrOCl layer screen the bottom gate,rendering the carrier density in TBG less sensitive to variations in the bottom gate voltage.These phenomena are well captured by a charge-transfer model between TBG and CrOCl.Our results provide insights into the control of electronic correlations and topological states in graphene moirésystems via interfacial charge coupling.展开更多
Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.B...Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.展开更多
This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and...This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.展开更多
Three-dimensional(3D)-printedgraphene aerogels hold promise for electromagneticwave absorption(EWA)engineering due to itsultralow density,outstanding electromagnetic dissipationwith the flexibility and precision of ma...Three-dimensional(3D)-printedgraphene aerogels hold promise for electromagneticwave absorption(EWA)engineering due to itsultralow density,outstanding electromagnetic dissipationwith the flexibility and precision of manufacturingstrategies.However,their high conductivitycauses severe impedance mismatch,limiting EWAperformance.3D printing requirements also constrainthe dielectric properties of printable grapheneinks,hindering the integration of high-performanceabsorbers with advanced manufacturing.This studyproposes a polyacrylic acid(PAA)gel-mediated3D porous graphene oxide(GO)aerogel multiscaleregulation strategy.Precise gel content control enablesdual-gradient tuning of the rheology(Benefitingdirect ink writing(DIW))and dielectric loss(Enhancing EWA)of GO/PAA composites and reduces aerogel density(6.9 mg cm^(-3)from28.2 mg cm^(-3)).Thermal reduction decomposes PAA into amorphous carbon nanoparticles anchored on reduced graphene oxide(rGO),enhancingimpedance matching and absorption via synergistic 0D/2D interfacial polarization and conductive loss.The optimized rGO/PAA aerogelachieves a minimum reflection loss(RL)of-39.86 dB at 2.5 mm and an effective absorption bandwidth(EAB)of 8.36 GHz(9.64-18 GHz)at3.2 mm.Combining DIW and this aerogel,we design a metamaterial absorber(MA)with dual material(dielectric loss)and structural gradients.This MA exhibits an ultrawide EAB of 14 GHz(4-18 GHz)with a total thickness of 7.8 mm.This work establishes a coupled design paradigmof“composition-structure-performance,”providing an engineerable solution for developing lightweight,broadband EWA materials.展开更多
Natural rubber(NR)latex is a renewable colloidal dispersion used in medical gloves,coatings,and flexible products.It is known for its excellent elasticity and film-forming ability but is limited by insufficient mechan...Natural rubber(NR)latex is a renewable colloidal dispersion used in medical gloves,coatings,and flexible products.It is known for its excellent elasticity and film-forming ability but is limited by insufficient mechanical robustness and chemical resistance.Incorporating nanofillers,such as graphene oxide(GO),is an effective approach to enhance its performance;however,achieving strong interfacial compatibility between hydrophilic GO and the nonpolar rubber matrix remains challenging.To overcome this issue,a multifunctional interfacial design inspired by mussel adhesion chemistry was developed to construct a hierarchical and cohesive GO network within the NR latex matrix.A tannic acid-based modifier(TM)bearing catechol and thiol groups was synthesized and anchored onto latex particles via hydrogen bonding with surface proteins and phospholipids,enabling subsequentπ-πinteractions and hydrogen bonding with GO nanosheets.This guided the selective self-assembly of GO into a continuous segregated network along the latex particle boundaries.Hierarchical interface reinforcement was achieved through Eu^(3+)ligand coordination.The incorporation of GO and enhancement of interfacial interactions promoted strain-induced crystallization,resulting in increased crystallinity and improved load transfer.The resulting composite film containing 0.5 part per hundred rubber GO and the bioinspired interface exhibited a tensile strength that was 107.8%higher than that of the pure NR latex film,while maintaining an elongation at break of 915%.Tear strength increased by 118.5%,toughness reached 61.7 MJ/m~3,nitrogen permeability decreased by 20.1%,and antibacterial efficiency against both Escherichia coli and Staphylococcus aureus reached 99.9%.The films also exhibited enhanced resistance to organic solvents,acids,and alkalis.This study provides a green and scalable strategy for fabricating high-performance NR latex-based products suitable for medical,protective,and engineering applications.展开更多
基金the Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia for funding this research work through the project number 445-9-687。
文摘Manipulating unintentional doping in graphene layers, which is influenced by environmental factors and supporting substrates, is of significant concern for the performance and advancement of graphene-based devices. In this context,laser-induced tuning of charge carriers in graphene facilitates the exploration of graphene's properties in relation to its surroundings and enables laser-assisted functionalization. This has the potential to advance optoelectronic devices that utilize graphene on transparent dielectric substrates, such as Al_(2)O_(3). In this work, laser power(PL) in Raman spectroscopy is used as a convenient contactless tool to manipulate and control unintentional carrier concentration and Fermi level position(EF) in graphene/α-Al_(2)O_(3)(G/Al_(2)O_(3)) under ambient conditions. Samples are annealed at 400℃ for two hours in an(Ar + H_(2)) atmosphere to remove any chemical residues. Analysis of the peak frequency(ω) and full width at half maximum(Γ) of the G and 2D bands show that G/Al_(2)O_(3) layers initially exhibit p-type doping, with EF located at ~100 me V below its Dirac charge-neutral point(DCNP). Increasing P_(L) results in effective carrier manipulation and raises E_F above DCNP. No significant internal stress is produced due to P_(L), as inferred from the strain-sensitive G^(*) band of graphene. Raman analysis of three successive cycles reveals hysteretic behavior from cycle to cycle, which is commonly reported to be limited by the type and density of the existing unintentional doping. Because of the ubiquitous nature of unintentional doping in graphene,manipulating it using contactless laser power to realize the desired graphene properties would be one of the best available practical approaches.
基金Project supported by the Research Innovation Fund for College Students of Beijing University of Posts and Telecommunications(Grant No.202002046)the National Natural Science Foundation of China(Grant No.61804012).
文摘A graphene/AlGaN deep-ultraviolet(UV)photodetector is presented with ultrahigh responsivity of 3.4×105 A/W at 261 nm incident wavelength and 149 pW light power.A gain mechanism based on electron trapping at the potential well is proposed to be responsible for the high responsivity.To optimize the trade-off between responsivity and response speed,a back-gate electrode is designed at the AlGaN/GaN two-dimensional electron gas(2DEG)area which eliminates the persistent photocurrent effect and shortens the recovery time from several hours to milliseconds.The 2DEG gate is proposed as an alternative way to apply the back gate electrode on AlGaN based devices on insulating substrates.This work sheds light on a possible way for weak deep-UV light detection.
基金financially supported by the National Natural Science Foundation of China (Nos. 51574118, 51571087, 51674292)the Natural Science Foundation of Hunan Province (No. 2015JJ4017)+1 种基金the Project of Innovation-driven Plan in Central South University (No. 2016CX007)the Hunan Provincial Science and Technology Plan Project, China (No. 2016TP1007)
文摘Graphene-reinforced aluminum （AI） matrix composites were successfully prepared via solution mixing and powder metallurgy in this study. The mechanical properties of the composites were studied using microhardness and tensile tests. Compared to the pure Al alloy, the graphene/Al composites showed increased strength and hardness. A tensile strength of 255 MPa was achieved for the graphene/Al com- posite with only 0.3wt% graphene, which has a 25% increase over the tensile strength of the pure Al matrix. Raman spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to investigate the morphol- ogies, chemical compositions, and microstructures of the graphene and the graphene/A1 composites. On the basis of fractographic evidence, a relevant fracture mechanism is proposed.
基金financially supported by the Chinese National Natural Science Fund for Distinguished Young Scholars(No.52025015)the National Natural Science Foundation of China(Nos.51771130,52071230,52101181)+3 种基金the Tianjin Youth Talent Support Program,the Tianjin Natural Science Funds for Distinguished Young Scholars(No.17JCJQJC44300)the Tianjin Science and Technology Support Project(No.17ZXCLGX00060)the China Postdoctoral Science Foundation(Nos.2020M670648 and 2021T140505)the Joint Fund of Ministry of Education for Equipment Pre-Research(No.6141A02033230)。
文摘The structural deterioration caused by the relatively weak out-of-plane bending stiffness and the chemically-active edge area of graphene limits its outperformance in strengthening for Al matrix composites(AMCs).Introducing one-dimensional(1D)carbon nanotubes(CNTs)to graphene/metal system is one of the promised strategies to complement the weakness of 2D graphene and make full use of the outstanding intrinsic properties of the both reinforcements.To date,such synergistic strengthening and toughening mechanisms are largely unknown.In this study,AMCs reinforced by a novel hybrid reinforcement,i.e.,graphene nanosheets decorated with Cu nanoparticles and CNTs(Cu@GNS-CNTs),are fabricated by an in-situ synthesis method.The combined contrast experiments validated that the organically integrated reinforcing structure promotes the intrinsic load bearing capacity of GNS and the strain hardening capability of the Al matrix simultaneously.As a result,the composites achieved excellent tensile strength and uniform elongation with almost no loss.The strengthening mechanism originated primarily from the hybrid reinforcement exhibits superior load-transfer,fracture inhibition and dislocation storage capability by controlling the interface reaction to construct an effective interface structure without damaging the reinforcement.Our work identifies a promising structural modification strategy for 2D materials and provides mechanistic insights into the synergistic strengthening effect of graphene/CNTs hybrid reinforcement.
文摘This study investigates the fabrication and characterization of Al alloy matrix composites reinforced with graphene oxide(GO) using accumulative roll bonding(ARB).The annealed Al 6061 sheets were processed through 5-pass ARB with GO reinforcement applied during the initial passes.Scanning electron microscopy revealed effective mitigation of GO agglomeration and improved interface bonding due to microscale material mixing.Raman spectroscopy confirmed the strong interaction between GO and the Al alloy matrix,as evidenced by the increased D band intensities and enhanced 2D band symmetry.Mechanical testing indicated an approximately 338.37% increase in yield strength(YS)and 86.42%improvement in hardness for the ARB-processed(ARBed)Al 6061/GO composite(0.2wt%)compared with annealed Al 6061 and an approximately 14.15%increase in YS and 17.23%improvement in hardness for the ARBedAl/GO composite(0.2wt%)compared with unreinforced ARBed Al 6061 specimens after five passes.X-ray diffraction analysis indicated an increased dislocation density,corroborating the observed enhancements in mechanical properties.Fracture surface analysis revealed reduced elongation with deep dimples,highlighting the tradeoff between strength and ductility.These results demonstrate the effectiveness of ARB for integrating GO into the Al 6061 matrix to improve the mechanical performance and interfacial bonding and underscore its potential for advanced composite materials.
基金Research Start-Up Fund Project of Anhui Polytechnic University(S022023017)University Research Project of Anhui Province(2023AH050937)+1 种基金Anhui Polytechnic University Research Foundation for Introducing Talents(2022YQQ003)Anhui Province Key Laboratory of Intelligent Vehicle Chassis by Wire。
文摘Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.
基金The National Natural Science Foundation of China(No.52173077)the Liaoning Provincial Department of Education Series Project(No.LJKZ0187)+1 种基金Natural Science Foundation of Liaoning Province(No.2023-MS-239)Liaoning BaiQianWan Talents Program(No.2021921081)。
文摘In this study,a facile method was employed to synthesize strong,yet highly elastic polyurethane-urea(PUU)with typical characteristics and 94% optical transmittance.Graphene platelets(GNPs)were prepared and modified via a scalable and eco-friendly mechanochemical approach.The produced GNPs is at 1.6-nm thickness with high electrical conductivity of~950 S/m.The structure-property relations of PUU/GNP nanocomposites were comprehensively investigated through morphology and mechanical properties measurements.The strong interface and high-density hydrogen bonds between modified GNPs(M-GNPs)and PUU significantly enhanced the mechanical properties of the PUU nanocomposite.The PUU composite showed 66.7%and 36.2%increments in tensile and impact strengths,respectively,at 0.2 wt% M-GNPs.The reversible hydrogen bond between M-GNPs and PUU endowed the nanocomposite with self-healing properties achieving 97.8% healing efficiency of the strength after 5 h at 120℃.This study demonstrates the importance of surface modification and provides a simple yet robust approach for preparing high-performance and functional PUU/graphene composites.
基金supported by European Union's Horizon Europe,UK Research and Innovation(UKRI).
文摘Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.
基金supported by the Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project(No.2024ZD1003100)the National Key R&D Program of China(Grant No.2024YFC2813700)。
文摘With the convergence of sensor technology,artificial intelligence,and the Internet of Things,intelligent vibration monitoring systems are undergoing transformative development.This evolution imposes stringent demands on the miniaturization,low power consumption,high integration,and environmental adaptability of transducers.Graphene,renowned for its superlative physicochemical attributes,holds significant promise for application in micro-and nanoelectromechanical systems(M/NEMS).However,the inherent central symmetry of graphene restricts its utility in piezoelectric devices.Inspired by the sensilla trichoidea of spiders,a threedimensional(3D)cilia-like monolayer graphene omnidirectional vibration transducer(CGVT)based on a stress-induced self-assembly mechanism is fabricated,demonstrating notable performance and high-temperature resistance.Furthermore,3D vibration vector decoding is realized via an omnidirectional decoupling algorithm based on one-dimensional convolutional neural networks(1DCNN)to achieve precise discrimination of vibration directions.The 3D bionic vibration-sensing system incorporates a spider web structure into a bionic cilia MEMS chip through a gold wire bonding process,enabling the realization of three distinct mechanisms for vibration detection and recognition.In particular,these devices are manufactured using silicon-based semiconductor processing techniques and MEMS fabrication methodologies,leading to a substantial reduction in the dimensions of individual components compared to traditional counterparts.
基金the support from the National Natural Science Foundation of China(52473083,52373089,52403085)Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)+2 种基金the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57)Natural Science Basic Research Plan in Shaanxi Province of China(2024JC-YBMS-279)Natural Science Foundation of Chongqing,China(2023NSCQMSX2547)
文摘With the miniaturization and high-frequency evolution of antennas in 5G/6G communications,aerospace,and transportation,polymer composite papers integrating superior wave-transparent performance and thermal conductivity for radar antenna systems are urgently needed.Herein,a down-top strategy was employed to synthesize poly(p-phenylene benzobisoxazole)precursor nanofibers(prePNF).The prePNF was then uniformly mixed with fluorinated graphene(FG)to fabricate FG/PNF composite papers through consecutively suction filtration,hot-pressing,and thermal annealing.The hydroxyl and amino groups in prePNF enhanced the stability of FG/prePNF dispersion,while the increasedπ-πinteractions between PNF and FG after annealing improved their compatibility.The preparation time and cost of PNF paper was significantly reduced when applying this strategy,which enabled its large-scale production.Furthermore,the prepared FG/PNF composite papers exhibited excellent wave-transparent performance and thermal conductivity.When the mass fraction of FG was 40 wt%,the FG/PNF composite paper prepared via the down-top strategy achieved the wave-transparent coefficient(|T|2)of 96.3%under 10 GHz,in-plane thermal conductivity(λ_(∥))of 7.13 W m^(−1)K^(−1),and through-plane thermal conductivity(λ_(⊥))of 0.67 W m^(−1)K^(−1),outperforming FG/PNF composite paper prepared by the top-down strategy(|T|2=95.9%,λ_(∥)=5.52 W m^(−1)K^(−1),λ_(⊥)=0.52 W m^(−1)K^(−1))and pure PNF paper(|T|2=94.7%,λ_(∥)=3.04 W m^(−1)K^(−1),λ_(⊥)=0.24 W m^(−1)K^(−1)).Meanwhile,FG/PNF composite paper(with 40 wt%FG)through the down-top strategy also demonstrated outstanding mechanical properties with tensile strength and toughness reaching 197.4 MPa and 11.6 MJ m^(−3),respectively.
基金supported by the public welfare project(Normal Education Quality Improvement Plan)by the China Education Development Foundation(Grant No.TZJH202202)the National Natural Science Foundation of China(Grant No.12274370)。
文摘We numerically investigate the effect of in-plane bending strain on valley-resolved conductance and valley polarization in a graphene nanoribbon with zigzag edges.The central region of the nanoribbon is bent into an arc with central angleφ.We find that the bending strain reduces the conductance but enhances the valley polarization.In the valley-resolved conductance spectra,there exist single-valley plateaus near the Dirac points and distinct Fano-type dips.Accordingly,a plateau of full valley polarization appears,which expands significantly at largeφ.At valleyresolved conductance dips,the valley polarization can be much larger than that in the unstrained case.The bending-induced enhancement of valley polarization can be explained by the features of pseudo-Landau levels in the bent region.Strain-induced valley polarization depends nonmonotonously on the nanoribbon width.These findings could be helpful in designing valleytronic devices with flexibility.
文摘In this study,the multi-scale(meso and macro)modelling was used to predict the electric response of the material.Porosity was introduced through a sugar-templating process to enhance compressibility and sensitivity.Mean-field homogenization was employed to predict the electrical conductivity of the nanocomposites,which was validated experimentally through I–V characterisation,confirming stable Ohmic behavior.The homogenised material parameters were incorporated into COMSOLMultiphysics to simulate diaphragmdeflection and capacitance variation under applied pressure.Experimental results showed a linear and stable capacitance response at the force magnitude of 0–7 N.The Graphene nanoplatelets(GnP)–Polydimethylsiloxane(PDMS)sensor demonstrated superior sensitivity(0.0032 pF/N)compared to the CNT–PDMS sensor(0.0019 pF/N),attributed to improved filler dispersion and higher effective surface area of GnP.Finite element simulations were further conducted to evaluate stress distribution in a GnP–PDMS-based capacitive sensor integrated into a shoe insole for gait analysis.The results correlated well with experimental capacitance changes,validating the sensor’s mechanical reliability and pressure sensitivity.This comparative study establishes the GnP–PDMS composite as a more effective candidate for low-cost,biocompatible,and high-performance flexible pressure sensors in wearable biomedical and gait monitoring applications.
文摘Laser-induced graphene(LIG)has emerged as a versatile,sustainable material for advanced energy technologies,offering a scalable,catalyst-free,and programmable method to directly convert carbon-rich substrates into porous,conductive graphene.This single-step laser writing approach enables flexible,patternable electrodes without complex post-processing.With its high conductivity,large surface area,and tunable chemistry,LIG is well-suited for diverse applications including batteries,supercapacitors,dyesensitized solar cells(DSSCs),dual cells,water-splitting electrocatalysis,and triboelectric nanogenerators(TENGs).In energy storage,LIG improves charge transport,buffer volume changes,and provides a robust framework,enhancing capacitance,cycling stability,and rate capability.Its catalytic activity is further boosted through heteroatom doping or transition-metal incorporation,achieving HER/OER performance comparable to noble metals.In DSSCs,LIG functions as a flexible,low-cost alternative to platinum counter electrodes,while in TENGs,its strong triboelectric response and mechanical durability enable integration into self-powered,wearable systems.Despite the immense recent progress in this field,challenges remain regarding the scalability,long-term operational stability,and interfacial engineering of LIGbased composites.Further exploration into multi-laser systems,substrate diversity,and synergistic composite architectures will be crucial to optimizing device performance and reliability.Nevertheless,the green,cost-efficient,rapid,and programmable synthesis of LIG poses it as a cornerstone potential building block material in the development of future sustainable and multifunctional energy systems.Throughout the review we compare fabrication strategies,summarize performance metrics against relevant benchmarks,and identifying common mechanistic advantages conferred by the laser writing process.Remaining challenges-such as scale-up,precursor diversity,long-term environmental stability,and integration into complex device architectures-are outlined alongside prospective research directions.Collectively,this review article provides an in-depth perspective on the multifunctional nature of LIG,underscoring its promise in next-generation energy storage,conversion,harvesting applications,and laying the groundwork for future research directions.
基金supported by Korea Electrotechnology Research Institute(KERI)Primary research program through the National Research Council of Science&Technology(NST)funded by the Ministry of Science and ICT(MSIT)(No.25A01015)by the Technology Innovation Program(20019091)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)by the National Research Council of Science&Technology(NST)grant from the Korea government(MSIT)(No.GTL24012-000).
文摘Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.
基金supported by the National Research Foundation of Korea(NRF)grants funded by the Korean government(MSIT)(RS-2024-00409952,RS-2024-00347936,and RS-202400407282)supported by the GRRC Program of Gyeonggi Province(GRRCHanyang2020-B01)supported by the Commercialization Promotion Agency for R&D Outcomes(COMPA)grant funded by the Korean Government(MSIT)(RS-2023-00304763)。
文摘The practical use of lithium metal anodes(LMAs)is impeded by uncontrolled dendrite growth,primarily caused by uneven Li-ion flux and significant volume changes during cycling.To overcome these challenges,we present binder-free holey wrinkled-multilayered graphene(HWMG)scaffolds for highperformance LMAs with long cycle life.Holey graphene oxide(HGO)sheets were restacked into particle-like holey wrinkled-multilayered graphene oxide(HWMGO)in a high-concentration GO suspension,in which few-layer HGOs were quickly stabilized and wrinkled during the drying process,and upon reduction,they transformed into HWMG.HWMG exhibited excellent adhesion due to chemical interactions via edge-located functional groups.Its particle-like morphology,with numerous nanopores and high porosity,conferred outstanding mechanical flexibility and low tortuosity,enabling uniform Li-ion flux,buffering volume expansion,and suppressing dendrite growth.As a result,excellent long-term stability over 800 cycles and a voltage hysteresis of ca.7 mV over 6000 h were realized for the HWMG scaffolds,and a high areal capacity of 3.34 mAh cm^(-2) at 0.3 C after 350 cycles was demonstrated in a full-cell configuration.This work promotes the practical application of LMAs by offering a scalable scaffold design that suppresses dendrites and enhances cycle life.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.52225207 and 52350001)the Shanghai Pilot Program for Basic Research–Fudan University 21TQ1400100(Grant No.21TQ006)the Shanghai Municipal Science and Technology Major Project(Grant No.2019SHZDZX01)。
文摘When two layers of graphene are stacked with a twist angle of approximately 1.1°,strong interlayer coupling gives rise to a pair of flat bands in twisted bilayer graphene(TBG),resulting in pronounced electron–electron interactions.At half filling of the flat bands,TBG exhibits correlated insulating states.Here,we investigate the electrical transport properties of heterostructures composed of TBG and the antiferromagnetic insulator chromium oxychloride(CrOCl),and propose a strategy to modulate the correlated insulating states in TBG.During the transition from a conventional phase to a strong interfacial coupling phase,kink-like features are observed in the charge neutrality point(CNP),correlated insulating state,and band insulating state.Under a perpendicular magnetic field,the system exhibits broadened quantum Hall plateaus in the strong interfacial coupling regime.Electrons localized in the CrOCl layer screen the bottom gate,rendering the carrier density in TBG less sensitive to variations in the bottom gate voltage.These phenomena are well captured by a charge-transfer model between TBG and CrOCl.Our results provide insights into the control of electronic correlations and topological states in graphene moirésystems via interfacial charge coupling.
基金supported by the National Natural Science Foundation of China(52276196)the Foundation of State Key Laboratory of Coal Combustion(FSKLCCA2508)the High-level Talent Foundation of Anhui Agricultural University(rc412307).
文摘Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.
基金supported by the National Natural Science Foundation of China(Nos.52471156,U20A20274,and 52071158)the China Postdoctoral Science Foundation(Nos.2024M751173 and 2024M752703)+1 种基金the Jiangsu Funding Program for Excellent Postdoctoral Talent,China(No.2024ZB229)the Natural Science Foundation of Jiangsu Higher Education Institutions,China(No.24KJB430012).
文摘This study investigates the anisotropic thermal conductivity of aluminum matrix composites reinforced with graphene nano-plates(GNPs)and in situ ZrB_(2) nanoparticles,while simultaneously maintaining high strength and toughness.A discontinuous layered GNPs-ZrB_(2)/AA6111 composite was prepared using in situ melt reactions and semi-solid stirring casting technology,combined with hot rolling deformation processing.Microstructural analysis revealed that the GNPs were aligned parallel to the rolling direction-transverse direction(RD-TD)plane,whereas the ZrB_(2) nanoparticles aggregated into cluster strips,collectively forming a discontinuous layered structure.This multilayer arrangement maximized the in-plane thermal conductivity of the GNPs.The tightly bonded GNP/Al interfaces with the locking of CuAl_(2) nanoparticles ensured that the GNPs fully exploited their high thermal conductivity.Therefore,the GNPs-ZrB_(2)/AA6111 composite achieved high in-plane thermal conductivity(230 W/(m·K)),which is higher than that of the matrix(206 W/(m·K)).The improved in-plane thermal conductivity is primarily attributed to the exceptionally high intrinsic in-plane thermal conductivity of the GNPs and their two-dimensional layered structure.However,the composite exhibited pronounced thermal conductivity anisotropy in the in-plane and through-plane directions.The reduced through-plane thermal conductivity is predominantly caused by the intrinsically low through-plane thermal conductivity of the GNPs and the increased interfacial thermal resistance from the additional grain boundaries.
基金supported by ZJNSF LZ25E030006Zhejiang Provincial Key Research and Development Program(2024C01157)+2 种基金NSFC under Grant Nos.52473267 and 52401249the National Key Research and Development Program of China under Grant No.2021YFB3501504Zhejiang University Ningbo“Five in One”Campus Project(K-20213539)。
文摘Three-dimensional(3D)-printedgraphene aerogels hold promise for electromagneticwave absorption(EWA)engineering due to itsultralow density,outstanding electromagnetic dissipationwith the flexibility and precision of manufacturingstrategies.However,their high conductivitycauses severe impedance mismatch,limiting EWAperformance.3D printing requirements also constrainthe dielectric properties of printable grapheneinks,hindering the integration of high-performanceabsorbers with advanced manufacturing.This studyproposes a polyacrylic acid(PAA)gel-mediated3D porous graphene oxide(GO)aerogel multiscaleregulation strategy.Precise gel content control enablesdual-gradient tuning of the rheology(Benefitingdirect ink writing(DIW))and dielectric loss(Enhancing EWA)of GO/PAA composites and reduces aerogel density(6.9 mg cm^(-3)from28.2 mg cm^(-3)).Thermal reduction decomposes PAA into amorphous carbon nanoparticles anchored on reduced graphene oxide(rGO),enhancingimpedance matching and absorption via synergistic 0D/2D interfacial polarization and conductive loss.The optimized rGO/PAA aerogelachieves a minimum reflection loss(RL)of-39.86 dB at 2.5 mm and an effective absorption bandwidth(EAB)of 8.36 GHz(9.64-18 GHz)at3.2 mm.Combining DIW and this aerogel,we design a metamaterial absorber(MA)with dual material(dielectric loss)and structural gradients.This MA exhibits an ultrawide EAB of 14 GHz(4-18 GHz)with a total thickness of 7.8 mm.This work establishes a coupled design paradigmof“composition-structure-performance,”providing an engineerable solution for developing lightweight,broadband EWA materials.
基金supported by the National Natural Science Foundation of China(No.52303063)。
文摘Natural rubber(NR)latex is a renewable colloidal dispersion used in medical gloves,coatings,and flexible products.It is known for its excellent elasticity and film-forming ability but is limited by insufficient mechanical robustness and chemical resistance.Incorporating nanofillers,such as graphene oxide(GO),is an effective approach to enhance its performance;however,achieving strong interfacial compatibility between hydrophilic GO and the nonpolar rubber matrix remains challenging.To overcome this issue,a multifunctional interfacial design inspired by mussel adhesion chemistry was developed to construct a hierarchical and cohesive GO network within the NR latex matrix.A tannic acid-based modifier(TM)bearing catechol and thiol groups was synthesized and anchored onto latex particles via hydrogen bonding with surface proteins and phospholipids,enabling subsequentπ-πinteractions and hydrogen bonding with GO nanosheets.This guided the selective self-assembly of GO into a continuous segregated network along the latex particle boundaries.Hierarchical interface reinforcement was achieved through Eu^(3+)ligand coordination.The incorporation of GO and enhancement of interfacial interactions promoted strain-induced crystallization,resulting in increased crystallinity and improved load transfer.The resulting composite film containing 0.5 part per hundred rubber GO and the bioinspired interface exhibited a tensile strength that was 107.8%higher than that of the pure NR latex film,while maintaining an elongation at break of 915%.Tear strength increased by 118.5%,toughness reached 61.7 MJ/m~3,nitrogen permeability decreased by 20.1%,and antibacterial efficiency against both Escherichia coli and Staphylococcus aureus reached 99.9%.The films also exhibited enhanced resistance to organic solvents,acids,and alkalis.This study provides a green and scalable strategy for fabricating high-performance NR latex-based products suitable for medical,protective,and engineering applications.
