Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic struct...Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.展开更多
Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,...Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.展开更多
Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artific...Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.展开更多
We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modi...We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modified PTFE(PTFE-O)with graphene oxide(GO),enabling tight interactions between the two phases through hydrogen bonding and van der Waals forces.Comprehensive characterizations,including XPS,FTIR,SEM,and contact angle analysis,confirmed the successful surface modification and uniform dispersion of GO.The optimized PTFE-O/GO composite exhibits a low resistivity of 2.41×10^(3)Ω·cm under a compression pressure of 2 MPa,demonstrating markedly improved conductivity and antistatic performance.These findings provide an effective route for constructing conductive PTFE-based composites and offer new insights into interface-engineered antistatic polymer materials.展开更多
Natural rubber(NR)latex is a renewable colloidal dispersion used in medical gloves,coatings,and flexible products.It is known for its excellent elasticity and film-forming ability but is limited by insufficient mechan...Natural rubber(NR)latex is a renewable colloidal dispersion used in medical gloves,coatings,and flexible products.It is known for its excellent elasticity and film-forming ability but is limited by insufficient mechanical robustness and chemical resistance.Incorporating nanofillers,such as graphene oxide(GO),is an effective approach to enhance its performance;however,achieving strong interfacial compatibility between hydrophilic GO and the nonpolar rubber matrix remains challenging.To overcome this issue,a multifunctional interfacial design inspired by mussel adhesion chemistry was developed to construct a hierarchical and cohesive GO network within the NR latex matrix.A tannic acid-based modifier(TM)bearing catechol and thiol groups was synthesized and anchored onto latex particles via hydrogen bonding with surface proteins and phospholipids,enabling subsequentπ-πinteractions and hydrogen bonding with GO nanosheets.This guided the selective self-assembly of GO into a continuous segregated network along the latex particle boundaries.Hierarchical interface reinforcement was achieved through Eu^(3+)ligand coordination.The incorporation of GO and enhancement of interfacial interactions promoted strain-induced crystallization,resulting in increased crystallinity and improved load transfer.The resulting composite film containing 0.5 part per hundred rubber GO and the bioinspired interface exhibited a tensile strength that was 107.8%higher than that of the pure NR latex film,while maintaining an elongation at break of 915%.Tear strength increased by 118.5%,toughness reached 61.7 MJ/m~3,nitrogen permeability decreased by 20.1%,and antibacterial efficiency against both Escherichia coli and Staphylococcus aureus reached 99.9%.The films also exhibited enhanced resistance to organic solvents,acids,and alkalis.This study provides a green and scalable strategy for fabricating high-performance NR latex-based products suitable for medical,protective,and engineering applications.展开更多
This study investigates the fabrication and characterization of Al alloy matrix composites reinforced with graphene oxide(GO) using accumulative roll bonding(ARB).The annealed Al 6061 sheets were processed through 5-p...This study investigates the fabrication and characterization of Al alloy matrix composites reinforced with graphene oxide(GO) using accumulative roll bonding(ARB).The annealed Al 6061 sheets were processed through 5-pass ARB with GO reinforcement applied during the initial passes.Scanning electron microscopy revealed effective mitigation of GO agglomeration and improved interface bonding due to microscale material mixing.Raman spectroscopy confirmed the strong interaction between GO and the Al alloy matrix,as evidenced by the increased D band intensities and enhanced 2D band symmetry.Mechanical testing indicated an approximately 338.37% increase in yield strength(YS)and 86.42%improvement in hardness for the ARB-processed(ARBed)Al 6061/GO composite(0.2wt%)compared with annealed Al 6061 and an approximately 14.15%increase in YS and 17.23%improvement in hardness for the ARBedAl/GO composite(0.2wt%)compared with unreinforced ARBed Al 6061 specimens after five passes.X-ray diffraction analysis indicated an increased dislocation density,corroborating the observed enhancements in mechanical properties.Fracture surface analysis revealed reduced elongation with deep dimples,highlighting the tradeoff between strength and ductility.These results demonstrate the effectiveness of ARB for integrating GO into the Al 6061 matrix to improve the mechanical performance and interfacial bonding and underscore its potential for advanced composite materials.展开更多
In coal mining on a high-pressure Ordovician limestone aquifer,grouting materials should have sufficient mechanical properties,particularly strong interfacial bonding performance to address stress concentration at the...In coal mining on a high-pressure Ordovician limestone aquifer,grouting materials should have sufficient mechanical properties,particularly strong interfacial bonding performance to address stress concentration at the grout-limestone interface induced by rock stress disturbances during mining.In this study,graphene oxide(GO)was integrated into cement-polyacrylate composite grout to improve its interfacial bonding.First,four-point bending tests were conducted,and the Monte Carlo method combined with the simplex search algorithm was employed to determine the variations in shear cohesion and static friction parameters.The results reveal that GO can significantly increase both the tensile and shear cohesion of the grout-limestone interface,but minimally affects the interfacial friction coefficient.Second,nuclear magnetic resonance(NMR)and scanning electron microscopy(SEM)tests were performed.The results indicate that GO nanosheets result in a squamaceous microstructure of the grout consolidation mass,increasing the adhesion of the grout-limestone interface.Moreover,spiny Aft(ettringite)clusters can be induced in limestone fracture surfaces by GO,which could serve as anchors for limestone and grout consolidation mass.展开更多
Graphene oxide nanomaterials are increasingly used in various fields due to their superior properties.In order to study the influence of graphene oxide additives on the performance of modified asphalt,in this study,gr...Graphene oxide nanomaterials are increasingly used in various fields due to their superior properties.In order to study the influence of graphene oxide additives on the performance of modified asphalt,in this study,graphene oxide modified asphalt was prepared and characteristics was studied including the high deformation resistance performance and the self-healing property of modified asphalt.Functional groups and morphology of graphene oxide modified asphalt were described by Fourier transform infrared spectroscopy.The high deformation resistance performance and self-healing effect of asphalt samples were obtained through dynamic slear rheometer(DSR)test.Results shows that graphene oxide dispersions improve the performance of asphalt relatively well compared to graphene oxide powder.There is no chemical reaction between graphene oxide and asphalt,but physical connection.The addition of graphene oxide improved the high deformation resistance of modified asphalt and expedited the self-healing ability of asphalt under fatigue load.展开更多
Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,a...Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.展开更多
Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect repair.In this study,TiO_(2)@reduced graphene oxide(rGO...Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect repair.In this study,TiO_(2)@reduced graphene oxide(rGO)composites were synthesized using a hydrothermal method in which rGO,which possesses very high electrical conductivity,promotes the separation of photoelectron-hole pairs of TiO_(2),thus improving the efficiency of photocatalytic production of reactive oxygen species(ROS).Subsequently,TiO_(2)@rGO composites were introduced into poly-L-lactic acid(PLLA)to prepare bone scaffolds with photocatalytic antibacterial function via selective laser sintering.The results showed that TiO_(2)grew on the surface of rGO and formed a covalent bond connection(Ti-O-C)with rGO.A decreased electrochemical impedance of TiO_(2)@rGO composites was observed,and the transient photocurrent intensity increased from 0.05 to 0.5μA/cm^(2).Analysis of electron spin resonance found that the photocatalytic products of TiO_(2)were·OH and·O^(2-),two kinds of ROS capable of killing bacteria via disrupting the structure of the bacterial membrane in vitro.Antibacterial experiments showed that the PLLA/TiO_(2)@rGO scaffolds had good antibacterial properties against Escherichia coli and Staphylococcus aureus.Finally,we report that these scaffolds exhibited both enhanced mechanical properties due to the addition of TiO_(2)@rGO as a reinforcement material and good biocompatibility during cell proliferation.展开更多
Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In t...Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In this study,a flake-like nickel cobaltate/re-duced graphene oxide/melamine-derived carbon foam(FNC/RGO/MDCF)was successfully fabricated through a combination of solvo-thermal treatment and high-temperature pyrolysis.Results indicated that RGO was evenly distributed in the MDCF skeleton,providing ef-fective support for the load growth of FNC on its surface.Sample S3,the FNC/RGO/MDCF composite prepared by solvothermal method for 16 h,exhibited a minimum reflection loss(RL_(min))of-66.44 dB at a thickness of 2.29 mm.When the thickness was reduced to 1.50 mm,the optimal effective absorption bandwidth was 3.84 GHz.Analysis of the absorption mechanism of FNC/RGO/MDCF revealed that its excellent absorption performance was primarily attributed to the combined effects of conduction loss,multiple reflection,scattering,in-terface polarization,and dipole polarization.展开更多
In pursuit of more efficient and stable electrochemical energy storage materials,composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and...In pursuit of more efficient and stable electrochemical energy storage materials,composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties.Graphene oxide(GO),a two-dimensional material with an extremely high specific surface area and excellent conductivity,offers new possibilities for enhancing the electrochemical performance of metal oxides.In this work,we synthesized met-al-organic framework(MOF)and GO composites by regulating the amount of GO,and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process.Based on the electrochemical tests,the optimal amount of GO was determined.This research will provide new insights into and directions for designing and synthesizing metal oxide and graphene oxide composite materials with an ideal electro-chemical performance.展开更多
The demand for high-energy-density sodium-ion batteries has driven research to increase the hard carbon(HC)plateau capacity(<0.1 V),but the plateau capacity-rate capability trade-off limits performance.We report a ...The demand for high-energy-density sodium-ion batteries has driven research to increase the hard carbon(HC)plateau capacity(<0.1 V),but the plateau capacity-rate capability trade-off limits performance.We report a way to regulate the closed pore structure and improve the rate capability of HC by the addition of graphene oxide using an emulsification process.In a non-emulsion system,graphene oxide not only shortens ion diffusion paths by inducing the formation of flakelike HC but also significantly improves the rate performance by serving as conductive bridges within the carbon matrix.The prepared graphene/phenolic resin carbon composite has reversible capacities of 362,340,319,274,119,86,69 and 48 mAh g^(−1)at current densities of 0.02,0.05,0.1,0.2,0.5,1,2 and 5 A g^(−1),respectively.When emulsification is introduced,the graphene oxide acts as a nano-confinement template,guiding the cross-linking of phenolic resin to form uniformly sized closed pores.This composite electrode material has the highest plateau capacity of 268 mAh g^(−1)at 20 mA g^(−1).展开更多
By enhancing surface interaction between metal oxide particles and carbon-based materials,it can effectively improve Faraday capacitance and conductivity,ultimately achieving high energy density with sufficient redox ...By enhancing surface interaction between metal oxide particles and carbon-based materials,it can effectively improve Faraday capacitance and conductivity,ultimately achieving high energy density with sufficient redox reactions in supercapacitors.Through a gentle biomineralization process and subsequent thermal reduction strategy,we successfully prepared the graphene oxide(GO)wrapping mixed-valence manganese oxides(MnO_(x))and S,P self-codoped carbon matrix porous composite(MnO_(x)@SPC@reduced graphene oxide(RGO)).During the biomineralization process of engineered Pseudomonas sp.(Ml)cells,GO nanosheets functioned as the'soil'to adsorb Mn^(2+)ion and uniformly disperse biogenic Mn oxides(BMO).After undergoing annealing,the MnO_(x) nanoparticles were evenly wrapped with graphene,resulting in the creation of the MnO_(x)@SPC@RGO3 composite.This composite possesses strong C—O—Mn bond interfaces,numerous electroactive sites,and a uniform pore structure.By optimizing the synergistic interaction between the highly conductive graphene and the remarkable surface capacitance of MnO_(x),the MnO_(x)@SPC@RGO3 electrode,with its intercalation Faraday reactions mechanism of■transformations,exhibits an outstanding specific capacity(448.3 F·g^(-1)at 0.5 A·g^(-1)),multiplying performance(340.5 F·g^(-1)at10 A·g^(-1)),and cycling stability(93.8%retention after 5000 cycles).Moreover,the asymmetric all-solidstate supercapacitors of MnO_(x)@SPC@RGO3//PC exhibit an exceptional energy density of 64.8 W·h·kg^(-1)and power density of 350 W·kg^(-1),as well as a long lifespan with capacitance retention of 92.5%after10000 cycles.In conclusion,the synthetic route utilizing biomineralization and thermal reduction exhibits significant potential for exploiting high-performance electrode materials in all-solid-state supercapacitor applications.展开更多
Graphene oxide (GO) reduced by Stachys lavandulifolia extract (SLE) was produced and characterised. The anti-corrosion behaviour of epoxy coatings containing GO and rGO nanosheets was investigated. FESEM-EDS, FT-IR, a...Graphene oxide (GO) reduced by Stachys lavandulifolia extract (SLE) was produced and characterised. The anti-corrosion behaviour of epoxy coatings containing GO and rGO nanosheets was investigated. FESEM-EDS, FT-IR, and Raman spectroscopy were used to examine the microstructure and chemical composition of the nanosheets and epoxy coatings. EIS experiment was used to explore the corrosion behaviour of the coatings. The O/C ratio for GO and rGO-SLE was found to be 2.5 and 4.5, indicating a decrease in the carbon content after the reduction of GO, confirming the adsorption of SLE onto the GO nanosheets. The successful reduction of GO in the presence of SLE particles was confirmed by disappearing the C=O peak and a significant decrease in the C-O-C bond intensity. The epoxy/rGO- SLE coatings exhibited the highest double-layer thickness and excellent corrosion resistance compared to neat epoxy and epoxy/GO coatings, emphasizing the significant role of rGO in enhancing the protective performance of epoxy coatings. The highest values for total charge transfer and film resistances and the inhibition efficiency were observed to be 6529 Ω·cm^(2) and 90%, respectively, for the epoxy/rGO-SLE coated steel plate. It was also found that the epoxy/0.15 wt.% rGO-SLE coating demonstrates the best corrosion resistance performance.展开更多
Paraphenylenediamine(PPDA)-grafted maleic anhydride(MAH)-modified graphene oxide(PGO)was synthesized through a dual modification process.Initially,MAH was employed to modify graphene oxide(GO)to enhance its reactive s...Paraphenylenediamine(PPDA)-grafted maleic anhydride(MAH)-modified graphene oxide(PGO)was synthesized through a dual modification process.Initially,MAH was employed to modify graphene oxide(GO)to enhance its reactive sites.Subsequently,PPDA was utilized for further modification of MAH-modified GO(MGO).Through a comprehensive analysis,the successful grafting of MAH and PPDA onto GO was confirmed.It was concurrently established that the optimal ratio of PPDA to MGO is 1:1.This approach yielded PGO characterized by outstanding dispersibility and barrier properties in epoxy resin(EP)coaings for Q235 steel.The corrosion resistance of EP coatings containing varying amounts of PGO was assessed using electrochemical workstation and salt spray testing.After immersing in a 3.5 wt.%NaCl solution for 300 h,the composite coating containing 0.1 wt.%PGO exhibited superior performance in terms of low-frequency impedance modulus,measuring at 1.1×10^(8)Ωcm^(2).The lowest corrosion current density was 2.32×10^(–10)A cm^(−2),and the self-corrosion voltage was−0.301 V.Additionally,polarization testing indicated that this coating also displayed the lowest corrosion rate,specifically 1.383×10^(–7)mm/a.展开更多
GO membranes with well-defined sub-nanometer channels are optimal for desalination and wastewater purification.However,the inherent instability of the interlayer structure and the severe trade-off between selectivity ...GO membranes with well-defined sub-nanometer channels are optimal for desalination and wastewater purification.However,the inherent instability of the interlayer structure and the severe trade-off between selectivity and permeability pose a significant challenge for GO membranes to be effectively applied to nanofiltration.Herein,we synthesized a series of PSSNa-GO-EDA/Al_(2)O_(3) membranes by embedding poly(sodium 4-styrenesulfonate)(PSSNa)into ethylenediamine-crosslinked GO interlayers.The resultant membranes exhibited greater interlayer structures,in which new hydrophilic confined nanostructures were constructed.Effective nanofiltration performance was achieved through electrostatic-induced ion-confined partitioning.The PSSNa-GO-EDA-1/Al_(2)O_(3)(PGE-1)membrane showed high rejection rates of 86.0%for Na_(2)SO_(4) and 53.8%for NaCl while maintaining competitive pure water permeance of 10.85 L·m^(-2)·h^(-1)·bar^(-1)(1 bar=0.1 MPa),which is 12.1 times higher than that of the pristine GO membrane.More importantly,after immersion in pure water for 680 h,this membrane retained commendable separation performance.Overall,our work provides an effective strategy to finely fabricate confined nanostructures in lamellar GO-based nanofiltration membranes featuring excellent separation performance.展开更多
The emerging two-dimensional(2D)membranes offer a promising way to improve the water desalination performance of traditional membranes.MXene/graphene oxide(GO) composite membrane are known for their high separation pe...The emerging two-dimensional(2D)membranes offer a promising way to improve the water desalination performance of traditional membranes.MXene/graphene oxide(GO) composite membrane are known for their high separation performance and structural stability.In this study,molecular simulations are performed to investigate the desalination performance of the 2D MXene/GO membrane.The results reveal that the surface of the MXene nanosheet could induce the formation of ordered water structures,thereby accelerating the water transport in the 2D membrane.The higher rejection rate would be found in MXene/GO membrane with a larger GO oxidation degree owing to the sterichindrance effect induced by the functional groups on the GO surface.Overall,the MXene/GO(20) membrane with the interlayer spacing of 0.9 nm shows the highest water permeability(37.22×10^(-7)L·m^(-1)·h^(-1)·bar^(-1),1 bar=0.1 MPa)and a salt rejection of 100%.The results could provide theoretical insights for developing 2D membranes for water desalination.展开更多
This study synthesizes and evaluates a novel polysulfone-based membrane doped with graphene oxidepolyethyleneimine-silicon oxide(GO-SiO_(2)-PEI),specifically designed for oily water treatment applications.The function...This study synthesizes and evaluates a novel polysulfone-based membrane doped with graphene oxidepolyethyleneimine-silicon oxide(GO-SiO_(2)-PEI),specifically designed for oily water treatment applications.The functionalization of graphene oxide with SiO_(2) and PEI was rigorously confirmed through comprehensive XRD,FTIR,Raman spectroscopy,and XPS analyses,ensuring the integrity and expected functionality of the nanocomposite.This nanocomposite was integrated into the polysulfone(PSF)membrane matrix,significantly reducing the membrane's inherent hydrophobicity and propensity for fouling.The membranes were meticulously characterized using advanced surface and bulk sensitive apparatus including contact angle and SEM imaging to ascertain their structural and functional attributes.Performance evaluations conducted in a dead-end filtration setup revealed that incorporating 1.0%(mass) of the nanocomposite into the PSF membrane markedly enhanced its porosity and improved the water contact angle.This modification led to an 809% increase in the membrane's water flux and a 57%enhancement in flux recovery rate,while still maintaining a high oil rejection rate and a relatively low leaching rate of 5.3 mg·L^(-1).Analysis through the Owens-Wendt-Kaelble model indicated a significant increase in polar surface energy,corroborating the improved oil rejection capabilities at elevated flux levels.Fouling behavior,analyzed using Hermia's model,identified cake formation as the primary fouling mechanism in most of the tested membranes.Leaching tests further highlighted those membranes with higher nanocomposite loadings exhibited increased leaching rates,suggesting a trade-off between performance enhancement and material stability.展开更多
Green hydrogen is crucial for advancing renewable energy technologies and protecting the environment.This study introduces a controllable method for bimetallic nickel-cobalt phosphide on reduced graphene oxide on nick...Green hydrogen is crucial for advancing renewable energy technologies and protecting the environment.This study introduces a controllable method for bimetallic nickel-cobalt phosphide on reduced graphene oxide on nickel foam(NiCo_(3)P.C/NF).The material demonstrated low overpotentials of 58 and 180 mV at10 mA cm^(-2)for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)in 1.0 M KOH.It achieved excellent electrochemical water-splitting performance with operating voltages of 1.54 and 2.6 V at 10 and 500 mA cm^(-2),respectively.The overall water-splitting performance of NiCo_(3).C/NF was extremely stable after 75 h of operation at 53 mA cm^(-2),retaining 98%efficiency,better than the sample Pt-C+RuO_(2),and outperforming previous reports.Density functional theory(DFT)results revealed a synergistic NiCo_(3)P.C interaction that yields nearly zero Gibbs free energy change(-0.100 eV)and upshift d-band center,the real active site at the Ni in HER,and the lowest overpotentials 0.26 V at the P active sites for OER.Furthermore,electronic charge distribution shows the maximum charge distribution between the NiCo_(3)P phase and graphene sheet heterojunction,enhancing the electrocatalyst conductivity.This combined approach offers an innovative strategy to design sustainable electrocatalysts for water s plitting.展开更多
基金supported by Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korea Government(MOTIE)(RS-2022-00154720,Technology Innovation Program Development of next-generation power semiconductor based on Si-on-SiC structure)the National Research Foundation of Korea(NRF)by the Korea government(RS-2023-NR076826)Global-Learning&Academic Research Institution for Master's·PhD students,and Postdocs(LAMP)Program of the National Research Foundation of Korea(NRF)by the Ministry of Education(No.RS-2024-00443714).
文摘Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.
基金supported by Korea Electrotechnology Research Institute(KERI)Primary research program through the National Research Council of Science&Technology(NST)funded by the Ministry of Science and ICT(MSIT)(No.25A01015)by the Technology Innovation Program(20019091)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)by the National Research Council of Science&Technology(NST)grant from the Korea government(MSIT)(No.GTL24012-000).
文摘Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.
基金extend their gratitude to the Deanship of Scientific Research,Vice Presidency for Graduate Studies and Scientific Research,King Faisal University,Saudi Arabia,for funding the publication of this work under the Ambitious Researcher program(Project No.KFU253806).
文摘Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.
基金Funded by the Key Scientific and Technological Project of Zhejiang Provincial Administration for Market Regulation(No.ZD2024004)the National Natural Science Foundation of China(Nos.62304214 and 62304213)+2 种基金the Natural Science Foundation of Zhejiang Province(No.LQ23E020006)the Chunhui Project Foun-dation of the Education Department of China(No.HZKY20220198)the Fundamental Research Funds for the Provincial Universities of Zhejiang(Nos.2021YW35,2021YW36 and 2022YW62)。
文摘We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modified PTFE(PTFE-O)with graphene oxide(GO),enabling tight interactions between the two phases through hydrogen bonding and van der Waals forces.Comprehensive characterizations,including XPS,FTIR,SEM,and contact angle analysis,confirmed the successful surface modification and uniform dispersion of GO.The optimized PTFE-O/GO composite exhibits a low resistivity of 2.41×10^(3)Ω·cm under a compression pressure of 2 MPa,demonstrating markedly improved conductivity and antistatic performance.These findings provide an effective route for constructing conductive PTFE-based composites and offer new insights into interface-engineered antistatic polymer materials.
基金supported by the National Natural Science Foundation of China(No.52303063)。
文摘Natural rubber(NR)latex is a renewable colloidal dispersion used in medical gloves,coatings,and flexible products.It is known for its excellent elasticity and film-forming ability but is limited by insufficient mechanical robustness and chemical resistance.Incorporating nanofillers,such as graphene oxide(GO),is an effective approach to enhance its performance;however,achieving strong interfacial compatibility between hydrophilic GO and the nonpolar rubber matrix remains challenging.To overcome this issue,a multifunctional interfacial design inspired by mussel adhesion chemistry was developed to construct a hierarchical and cohesive GO network within the NR latex matrix.A tannic acid-based modifier(TM)bearing catechol and thiol groups was synthesized and anchored onto latex particles via hydrogen bonding with surface proteins and phospholipids,enabling subsequentπ-πinteractions and hydrogen bonding with GO nanosheets.This guided the selective self-assembly of GO into a continuous segregated network along the latex particle boundaries.Hierarchical interface reinforcement was achieved through Eu^(3+)ligand coordination.The incorporation of GO and enhancement of interfacial interactions promoted strain-induced crystallization,resulting in increased crystallinity and improved load transfer.The resulting composite film containing 0.5 part per hundred rubber GO and the bioinspired interface exhibited a tensile strength that was 107.8%higher than that of the pure NR latex film,while maintaining an elongation at break of 915%.Tear strength increased by 118.5%,toughness reached 61.7 MJ/m~3,nitrogen permeability decreased by 20.1%,and antibacterial efficiency against both Escherichia coli and Staphylococcus aureus reached 99.9%.The films also exhibited enhanced resistance to organic solvents,acids,and alkalis.This study provides a green and scalable strategy for fabricating high-performance NR latex-based products suitable for medical,protective,and engineering applications.
文摘This study investigates the fabrication and characterization of Al alloy matrix composites reinforced with graphene oxide(GO) using accumulative roll bonding(ARB).The annealed Al 6061 sheets were processed through 5-pass ARB with GO reinforcement applied during the initial passes.Scanning electron microscopy revealed effective mitigation of GO agglomeration and improved interface bonding due to microscale material mixing.Raman spectroscopy confirmed the strong interaction between GO and the Al alloy matrix,as evidenced by the increased D band intensities and enhanced 2D band symmetry.Mechanical testing indicated an approximately 338.37% increase in yield strength(YS)and 86.42%improvement in hardness for the ARB-processed(ARBed)Al 6061/GO composite(0.2wt%)compared with annealed Al 6061 and an approximately 14.15%increase in YS and 17.23%improvement in hardness for the ARBedAl/GO composite(0.2wt%)compared with unreinforced ARBed Al 6061 specimens after five passes.X-ray diffraction analysis indicated an increased dislocation density,corroborating the observed enhancements in mechanical properties.Fracture surface analysis revealed reduced elongation with deep dimples,highlighting the tradeoff between strength and ductility.These results demonstrate the effectiveness of ARB for integrating GO into the Al 6061 matrix to improve the mechanical performance and interfacial bonding and underscore its potential for advanced composite materials.
基金supported by the National Key R&D Program of China(Grant Nos.U25A20810 and 2024YFF0508201)the National Natural Science Foundation of China(Grant No.12302504).
文摘In coal mining on a high-pressure Ordovician limestone aquifer,grouting materials should have sufficient mechanical properties,particularly strong interfacial bonding performance to address stress concentration at the grout-limestone interface induced by rock stress disturbances during mining.In this study,graphene oxide(GO)was integrated into cement-polyacrylate composite grout to improve its interfacial bonding.First,four-point bending tests were conducted,and the Monte Carlo method combined with the simplex search algorithm was employed to determine the variations in shear cohesion and static friction parameters.The results reveal that GO can significantly increase both the tensile and shear cohesion of the grout-limestone interface,but minimally affects the interfacial friction coefficient.Second,nuclear magnetic resonance(NMR)and scanning electron microscopy(SEM)tests were performed.The results indicate that GO nanosheets result in a squamaceous microstructure of the grout consolidation mass,increasing the adhesion of the grout-limestone interface.Moreover,spiny Aft(ettringite)clusters can be induced in limestone fracture surfaces by GO,which could serve as anchors for limestone and grout consolidation mass.
基金supported by Gansu Provincial Science and Technology Plan(23CXGA0195)Longnan Science and Technology Plan(2024CX03)。
文摘Graphene oxide nanomaterials are increasingly used in various fields due to their superior properties.In order to study the influence of graphene oxide additives on the performance of modified asphalt,in this study,graphene oxide modified asphalt was prepared and characteristics was studied including the high deformation resistance performance and the self-healing property of modified asphalt.Functional groups and morphology of graphene oxide modified asphalt were described by Fourier transform infrared spectroscopy.The high deformation resistance performance and self-healing effect of asphalt samples were obtained through dynamic slear rheometer(DSR)test.Results shows that graphene oxide dispersions improve the performance of asphalt relatively well compared to graphene oxide powder.There is no chemical reaction between graphene oxide and asphalt,but physical connection.The addition of graphene oxide improved the high deformation resistance of modified asphalt and expedited the self-healing ability of asphalt under fatigue load.
基金supported by the National Natural Science Foundation of China(No.61904073)Spring City Plan-Special Program for Young Talents(No.K202005007)+4 种基金Yunnan Talents Support Plan for Yong Talents(No.XDYC-QNRC-20220482)Yunnan Local Colleges Applied Basic Research Projects(No.202101BA070001-138)Scientific Research Fund of Yunnan Education Department(No.2023Y0883)Frontier Research Team of Kunming University 2023Key Laboratory of Artificial Microstructures in Yunnan Higher Education。
文摘Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.
基金supported by the following funds:The National Natural Science Foundation of China(Nos.52275393,51935014,and 82072084)Jiangxi Provincial Natural Science Foundation of China(No.20224ACB204013)+2 种基金The Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performancethe National Key Research and Development Program of China(No.2023YFB4605800)the Independent Exploration and Innovation Project of Central South University(No.1053320221707).
文摘Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect repair.In this study,TiO_(2)@reduced graphene oxide(rGO)composites were synthesized using a hydrothermal method in which rGO,which possesses very high electrical conductivity,promotes the separation of photoelectron-hole pairs of TiO_(2),thus improving the efficiency of photocatalytic production of reactive oxygen species(ROS).Subsequently,TiO_(2)@rGO composites were introduced into poly-L-lactic acid(PLLA)to prepare bone scaffolds with photocatalytic antibacterial function via selective laser sintering.The results showed that TiO_(2)grew on the surface of rGO and formed a covalent bond connection(Ti-O-C)with rGO.A decreased electrochemical impedance of TiO_(2)@rGO composites was observed,and the transient photocurrent intensity increased from 0.05 to 0.5μA/cm^(2).Analysis of electron spin resonance found that the photocatalytic products of TiO_(2)were·OH and·O^(2-),two kinds of ROS capable of killing bacteria via disrupting the structure of the bacterial membrane in vitro.Antibacterial experiments showed that the PLLA/TiO_(2)@rGO scaffolds had good antibacterial properties against Escherichia coli and Staphylococcus aureus.Finally,we report that these scaffolds exhibited both enhanced mechanical properties due to the addition of TiO_(2)@rGO as a reinforcement material and good biocompatibility during cell proliferation.
基金support of the Key Science Research Project in Colleges and Universities of Anhui Province,China(No.2022AH050813)the Medical Special Cultivation Project of Anhui University of Science and Technology,China(No.YZ2023H2A002).
文摘Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In this study,a flake-like nickel cobaltate/re-duced graphene oxide/melamine-derived carbon foam(FNC/RGO/MDCF)was successfully fabricated through a combination of solvo-thermal treatment and high-temperature pyrolysis.Results indicated that RGO was evenly distributed in the MDCF skeleton,providing ef-fective support for the load growth of FNC on its surface.Sample S3,the FNC/RGO/MDCF composite prepared by solvothermal method for 16 h,exhibited a minimum reflection loss(RL_(min))of-66.44 dB at a thickness of 2.29 mm.When the thickness was reduced to 1.50 mm,the optimal effective absorption bandwidth was 3.84 GHz.Analysis of the absorption mechanism of FNC/RGO/MDCF revealed that its excellent absorption performance was primarily attributed to the combined effects of conduction loss,multiple reflection,scattering,in-terface polarization,and dipole polarization.
基金supported by the National Natural Science Foundation of China(51971157)Shenzhen Science and Technology Program(JCYJ20210324115412035,JCYJ202103-24123202008,JCYJ20210324122803009 and ZDS-YS20210813095534001)Guangdong Foundation for Basic and Applied Basic Research Program(2021A1515110880).
文摘In pursuit of more efficient and stable electrochemical energy storage materials,composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties.Graphene oxide(GO),a two-dimensional material with an extremely high specific surface area and excellent conductivity,offers new possibilities for enhancing the electrochemical performance of metal oxides.In this work,we synthesized met-al-organic framework(MOF)and GO composites by regulating the amount of GO,and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process.Based on the electrochemical tests,the optimal amount of GO was determined.This research will provide new insights into and directions for designing and synthesizing metal oxide and graphene oxide composite materials with an ideal electro-chemical performance.
文摘The demand for high-energy-density sodium-ion batteries has driven research to increase the hard carbon(HC)plateau capacity(<0.1 V),but the plateau capacity-rate capability trade-off limits performance.We report a way to regulate the closed pore structure and improve the rate capability of HC by the addition of graphene oxide using an emulsification process.In a non-emulsion system,graphene oxide not only shortens ion diffusion paths by inducing the formation of flakelike HC but also significantly improves the rate performance by serving as conductive bridges within the carbon matrix.The prepared graphene/phenolic resin carbon composite has reversible capacities of 362,340,319,274,119,86,69 and 48 mAh g^(−1)at current densities of 0.02,0.05,0.1,0.2,0.5,1,2 and 5 A g^(−1),respectively.When emulsification is introduced,the graphene oxide acts as a nano-confinement template,guiding the cross-linking of phenolic resin to form uniformly sized closed pores.This composite electrode material has the highest plateau capacity of 268 mAh g^(−1)at 20 mA g^(−1).
基金supported by the National Natural Science Foundation of China(31900005)the Fund of Science and Technology Department of Henan Province(242102231001,242102320362,242102320157)+1 种基金the Fund of Program for Innovative Research Team(in Science and Technology)in University of Henan Province(23IRTSTHN009)Fund of Key Scientific Research Projects of Higher Education Institutions in Henan Province(22A150048)。
文摘By enhancing surface interaction between metal oxide particles and carbon-based materials,it can effectively improve Faraday capacitance and conductivity,ultimately achieving high energy density with sufficient redox reactions in supercapacitors.Through a gentle biomineralization process and subsequent thermal reduction strategy,we successfully prepared the graphene oxide(GO)wrapping mixed-valence manganese oxides(MnO_(x))and S,P self-codoped carbon matrix porous composite(MnO_(x)@SPC@reduced graphene oxide(RGO)).During the biomineralization process of engineered Pseudomonas sp.(Ml)cells,GO nanosheets functioned as the'soil'to adsorb Mn^(2+)ion and uniformly disperse biogenic Mn oxides(BMO).After undergoing annealing,the MnO_(x) nanoparticles were evenly wrapped with graphene,resulting in the creation of the MnO_(x)@SPC@RGO3 composite.This composite possesses strong C—O—Mn bond interfaces,numerous electroactive sites,and a uniform pore structure.By optimizing the synergistic interaction between the highly conductive graphene and the remarkable surface capacitance of MnO_(x),the MnO_(x)@SPC@RGO3 electrode,with its intercalation Faraday reactions mechanism of■transformations,exhibits an outstanding specific capacity(448.3 F·g^(-1)at 0.5 A·g^(-1)),multiplying performance(340.5 F·g^(-1)at10 A·g^(-1)),and cycling stability(93.8%retention after 5000 cycles).Moreover,the asymmetric all-solidstate supercapacitors of MnO_(x)@SPC@RGO3//PC exhibit an exceptional energy density of 64.8 W·h·kg^(-1)and power density of 350 W·kg^(-1),as well as a long lifespan with capacitance retention of 92.5%after10000 cycles.In conclusion,the synthetic route utilizing biomineralization and thermal reduction exhibits significant potential for exploiting high-performance electrode materials in all-solid-state supercapacitor applications.
文摘Graphene oxide (GO) reduced by Stachys lavandulifolia extract (SLE) was produced and characterised. The anti-corrosion behaviour of epoxy coatings containing GO and rGO nanosheets was investigated. FESEM-EDS, FT-IR, and Raman spectroscopy were used to examine the microstructure and chemical composition of the nanosheets and epoxy coatings. EIS experiment was used to explore the corrosion behaviour of the coatings. The O/C ratio for GO and rGO-SLE was found to be 2.5 and 4.5, indicating a decrease in the carbon content after the reduction of GO, confirming the adsorption of SLE onto the GO nanosheets. The successful reduction of GO in the presence of SLE particles was confirmed by disappearing the C=O peak and a significant decrease in the C-O-C bond intensity. The epoxy/rGO- SLE coatings exhibited the highest double-layer thickness and excellent corrosion resistance compared to neat epoxy and epoxy/GO coatings, emphasizing the significant role of rGO in enhancing the protective performance of epoxy coatings. The highest values for total charge transfer and film resistances and the inhibition efficiency were observed to be 6529 Ω·cm^(2) and 90%, respectively, for the epoxy/rGO-SLE coated steel plate. It was also found that the epoxy/0.15 wt.% rGO-SLE coating demonstrates the best corrosion resistance performance.
基金supports for this work are the Inner Mongolia Major Science and Technology Project(No.2020ZD0024)Natural Science Foundation of Inner Mongolia(No.2024LHMS05046)+5 种基金Local Science and Technology Development Project of the Central Government(Nos.2021ZY0006 and 2022ZY0011)2023 Inner Mongolia Autonomous Region Doctoral Research Innovation Project(No.B20231023Z)Inner Mongolia Autonomous Region key Research and Technological Achievements Transformation Plan Project(No.2023YFHH0063)Autonomous Region higher education Carbon peak carbon neutral research project(No.STZX202206)Basic Scientific Research Expenses Program of Universities directly under Inner Mongolia Autonomous Region(No.JY20220043)Graphite and Graphene New Materials Discipline Team of Inner Mongolia University of Technology(No.PY202066).
文摘Paraphenylenediamine(PPDA)-grafted maleic anhydride(MAH)-modified graphene oxide(PGO)was synthesized through a dual modification process.Initially,MAH was employed to modify graphene oxide(GO)to enhance its reactive sites.Subsequently,PPDA was utilized for further modification of MAH-modified GO(MGO).Through a comprehensive analysis,the successful grafting of MAH and PPDA onto GO was confirmed.It was concurrently established that the optimal ratio of PPDA to MGO is 1:1.This approach yielded PGO characterized by outstanding dispersibility and barrier properties in epoxy resin(EP)coaings for Q235 steel.The corrosion resistance of EP coatings containing varying amounts of PGO was assessed using electrochemical workstation and salt spray testing.After immersing in a 3.5 wt.%NaCl solution for 300 h,the composite coating containing 0.1 wt.%PGO exhibited superior performance in terms of low-frequency impedance modulus,measuring at 1.1×10^(8)Ωcm^(2).The lowest corrosion current density was 2.32×10^(–10)A cm^(−2),and the self-corrosion voltage was−0.301 V.Additionally,polarization testing indicated that this coating also displayed the lowest corrosion rate,specifically 1.383×10^(–7)mm/a.
基金supported by the National Natural Science Foundation of China(21490581)China Petroleum&Chemical Corporation(317008-6)。
文摘GO membranes with well-defined sub-nanometer channels are optimal for desalination and wastewater purification.However,the inherent instability of the interlayer structure and the severe trade-off between selectivity and permeability pose a significant challenge for GO membranes to be effectively applied to nanofiltration.Herein,we synthesized a series of PSSNa-GO-EDA/Al_(2)O_(3) membranes by embedding poly(sodium 4-styrenesulfonate)(PSSNa)into ethylenediamine-crosslinked GO interlayers.The resultant membranes exhibited greater interlayer structures,in which new hydrophilic confined nanostructures were constructed.Effective nanofiltration performance was achieved through electrostatic-induced ion-confined partitioning.The PSSNa-GO-EDA-1/Al_(2)O_(3)(PGE-1)membrane showed high rejection rates of 86.0%for Na_(2)SO_(4) and 53.8%for NaCl while maintaining competitive pure water permeance of 10.85 L·m^(-2)·h^(-1)·bar^(-1)(1 bar=0.1 MPa),which is 12.1 times higher than that of the pristine GO membrane.More importantly,after immersion in pure water for 680 h,this membrane retained commendable separation performance.Overall,our work provides an effective strategy to finely fabricate confined nanostructures in lamellar GO-based nanofiltration membranes featuring excellent separation performance.
基金supported by the National Natural Science Foundation of China(22078251,21706197)the Open Project of Hubei Key Laboratory of Novel Reactor and Green Chemical Technology(NRG202407)+1 种基金the Ministry-of-Education,Key Laboratory for the Synthesis and Application of Organic Functional Molecules(KLSAOFM2511)the Graduate Innovative Fund of Wuhan Institute of Technology(CX2023024)。
文摘The emerging two-dimensional(2D)membranes offer a promising way to improve the water desalination performance of traditional membranes.MXene/graphene oxide(GO) composite membrane are known for their high separation performance and structural stability.In this study,molecular simulations are performed to investigate the desalination performance of the 2D MXene/GO membrane.The results reveal that the surface of the MXene nanosheet could induce the formation of ordered water structures,thereby accelerating the water transport in the 2D membrane.The higher rejection rate would be found in MXene/GO membrane with a larger GO oxidation degree owing to the sterichindrance effect induced by the functional groups on the GO surface.Overall,the MXene/GO(20) membrane with the interlayer spacing of 0.9 nm shows the highest water permeability(37.22×10^(-7)L·m^(-1)·h^(-1)·bar^(-1),1 bar=0.1 MPa)and a salt rejection of 100%.The results could provide theoretical insights for developing 2D membranes for water desalination.
基金made possible by Qatar University internal grant(i-GA-379)graduate sponsorship research award (GSRA7-1-0510-20046) from Qatar National Research Fund (QNRF)。
文摘This study synthesizes and evaluates a novel polysulfone-based membrane doped with graphene oxidepolyethyleneimine-silicon oxide(GO-SiO_(2)-PEI),specifically designed for oily water treatment applications.The functionalization of graphene oxide with SiO_(2) and PEI was rigorously confirmed through comprehensive XRD,FTIR,Raman spectroscopy,and XPS analyses,ensuring the integrity and expected functionality of the nanocomposite.This nanocomposite was integrated into the polysulfone(PSF)membrane matrix,significantly reducing the membrane's inherent hydrophobicity and propensity for fouling.The membranes were meticulously characterized using advanced surface and bulk sensitive apparatus including contact angle and SEM imaging to ascertain their structural and functional attributes.Performance evaluations conducted in a dead-end filtration setup revealed that incorporating 1.0%(mass) of the nanocomposite into the PSF membrane markedly enhanced its porosity and improved the water contact angle.This modification led to an 809% increase in the membrane's water flux and a 57%enhancement in flux recovery rate,while still maintaining a high oil rejection rate and a relatively low leaching rate of 5.3 mg·L^(-1).Analysis through the Owens-Wendt-Kaelble model indicated a significant increase in polar surface energy,corroborating the improved oil rejection capabilities at elevated flux levels.Fouling behavior,analyzed using Hermia's model,identified cake formation as the primary fouling mechanism in most of the tested membranes.Leaching tests further highlighted those membranes with higher nanocomposite loadings exhibited increased leaching rates,suggesting a trade-off between performance enhancement and material stability.
基金supported by the Regional Leading Research Center Program(2019R1A5A8080326)funding from the Basic Science Research Program(2021R1F1A1048758,2022R1I1A1A01053248)+1 种基金the Regional Innovation Strategy(RIS)(2023RIS-008)through the National Research Foundation of Korea(NRF),funded by the Ministry of Educationsupported by the National Supercomputing Center,which provided supercomputing resources and technical support(TS-2024-RE-0039)。
文摘Green hydrogen is crucial for advancing renewable energy technologies and protecting the environment.This study introduces a controllable method for bimetallic nickel-cobalt phosphide on reduced graphene oxide on nickel foam(NiCo_(3)P.C/NF).The material demonstrated low overpotentials of 58 and 180 mV at10 mA cm^(-2)for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)in 1.0 M KOH.It achieved excellent electrochemical water-splitting performance with operating voltages of 1.54 and 2.6 V at 10 and 500 mA cm^(-2),respectively.The overall water-splitting performance of NiCo_(3).C/NF was extremely stable after 75 h of operation at 53 mA cm^(-2),retaining 98%efficiency,better than the sample Pt-C+RuO_(2),and outperforming previous reports.Density functional theory(DFT)results revealed a synergistic NiCo_(3)P.C interaction that yields nearly zero Gibbs free energy change(-0.100 eV)and upshift d-band center,the real active site at the Ni in HER,and the lowest overpotentials 0.26 V at the P active sites for OER.Furthermore,electronic charge distribution shows the maximum charge distribution between the NiCo_(3)P phase and graphene sheet heterojunction,enhancing the electrocatalyst conductivity.This combined approach offers an innovative strategy to design sustainable electrocatalysts for water s plitting.
