Phase change heat transfer devices like heat pipes are widely utilized in temperature control and heat transfer.However,the traditional single uniform wick makes it hard to meet the requirements of capillary pressure ...Phase change heat transfer devices like heat pipes are widely utilized in temperature control and heat transfer.However,the traditional single uniform wick makes it hard to meet the requirements of capillary pressure and permeability for high-performance heat pipes,thus limiting the improvement of heat transfer performance.In this paper,a gradient structure wick sintered by 316 L stainless steel powder is designed.The capillary performance is tested and characterized through permeability test experiments and capillary rise infrared test experiments.Moreover,the influence of different particle sizes of sintered powder on the capillary performance of the wick structure is studied.The experimental results indicate that the capillary pressure and permeability of the gradient structure wick are significantly improved compared with the traditional single structure wick.Its capillary performance parameter S(K·Pcap)is enhanced by more than 30%,providing an effective alternative for the wick of two-phase heat exchange devices.展开更多
The effects of gradient structure on the microstructure and properties of coated cemented carbides were researched with optical microscopy （OM）, scanning electron microscopy （SEM）, strength measurements, and cutti...The effects of gradient structure on the microstructure and properties of coated cemented carbides were researched with optical microscopy （OM）, scanning electron microscopy （SEM）, strength measurements, and cutting tests. It shows that vacuum sintering of WC-Ti（C, N）-TaC-Co cemented carbides results in the formation of a surface ductile zone. The ductile zone prevents crack propagation and leads to the increase of transverse rupture strength of the substrate. The impact resistance of coated gradient inserts was obviously improved on the basis of maintaining resistance to abrasion and the forming mechanism of the gradient structure was also analyzed.展开更多
Gradient nanostructure was introduced to enhance the strength and ductility via deformation incompatibility accommodated by geometrical necessary dislocations for most metallic materials recently.However,few intensive...Gradient nanostructure was introduced to enhance the strength and ductility via deformation incompatibility accommodated by geometrical necessary dislocations for most metallic materials recently.However,few intensive researches were carried out to investigate the effect of gradient structure on the deformation twin evolution and resulting performance improvements.In the present paper,we produced gradient-structured AZ31 Mg alloy with fine-grain layers,parallel twin laminates and a coarse-grain core from two upmost surfaces to the center of plate.Surprisingly,this architected Mg alloy exhibited simultaneous enhancement of strength and ductility.Subsequent microstructural observations demonstrated that abundant twin-twin interactions resulting from higher strength and multi-axial stress state could make great contributions to the increase of work-hardening capability.This was further proved by the measurement of full-field strain evolution during the plastic deformation.Such a design strategy may provide a new path for producing advanced structure materials in which the deformation twinning works as one of the dominant plasticity mechanisms.展开更多
Multi-principal-element alloys(MPEAs)are attracting increasing attentions because of their high strength and ductility,high fracture toughness,excellent corrosion resistance,outstanding thermal-softening resistance an...Multi-principal-element alloys(MPEAs)are attracting increasing attentions because of their high strength and ductility,high fracture toughness,excellent corrosion resistance,outstanding thermal-softening resistance and high oxidation resistance.Moreover,gradient structures(GSs)have been shown to be effective in alleviating the strength-ductility trade-off although strength and ductility are mutually exclusive properties for metals,which provides an opportunity for developing highperformance MPEAs.Here,we summarized four processing methods for creating GSs in MPEAs,including rotationally accelerated shot peening(RASP),ultra-precision machining technology(UPMT),cyclic dynamic torsion(CDT),and ultrasonic surface rolling processing(USRP).Principles,advantages,disadvantages,and typical applications of these methods are discussed in this work.展开更多
A new technology-rotationally accelerated shot peening（RASP）, was developed to prepare gradient structured materials. By using centrifugal acceleration principle and large steel balls, the RASP technology can produc...A new technology-rotationally accelerated shot peening（RASP）, was developed to prepare gradient structured materials. By using centrifugal acceleration principle and large steel balls, the RASP technology can produce much higher impact energy compared to conventional shot peening. As a proof-of-concept demonstration, the RASP was utilized to refine the surface layer in pure copper（Cu） with an average grain size of 85 nm. The grain size increases largely from surface downwards the bulk, forming an800 ？m thick gradient-structured surface layer and consequently a micro-hardness gradient. The difference between the RASP technology and other established techniques in preparing gradient structured materials is discussed. The RASP technology exhibits a promoting future for large-scale manufacturing of gradient materials.展开更多
Nanocrystalline metals with high Gibbs free energy have a strong tendency towards thermally driven grain growth,thus understanding the critical size or temperature of grain growth is vital for their applications.The i...Nanocrystalline metals with high Gibbs free energy have a strong tendency towards thermally driven grain growth,thus understanding the critical size or temperature of grain growth is vital for their applications.The investigations of thermal stability were usually conducted on the materials with a homogeneous structure;however,these methods are time-consuming and expensive.In the present work,we reveal a high-throughput experimental strategy to characterize the size-dependent thermal stability via annealing the gradient structured Ni.Employing this method,the critical size of grain growth(d_(c))at a given annealing temperature was rapidly determined.The critical size of grain growth was~95 nm when annealed at 503 K for 3 h,which is consistent with the value reported in the homogeneous structured Ni.Furthermore,this critical size was found to be identical in three types of gradient structured Ni,i.e.,independent on the gradient structure.Our present work demonstrates a high-throughput strategy for exploring the critical size of grain growth and size-dependent thermal stability of metals.展开更多
Copper foils with gradient structure in thickness direction and different roughnesses on two surfaces were fabricated by double rolling. The two surface morphologies of double-rolled copper foils are quite different, ...Copper foils with gradient structure in thickness direction and different roughnesses on two surfaces were fabricated by double rolling. The two surface morphologies of double-rolled copper foils are quite different, and the surface roughness values are 61 and 1095 nm, respectively. The roughness value of matt surface can meet the requirement for bonding the resin matrix with copper foils used for flexible printed circuit boards, thus may omit traditional roughening treatment; the microstructure of double-rolled copper foils demonstrates an obviously asymmetric gradient feature. From bright surface to matt surface in thickness direction, the average grain size first increases from 2.3 to 7.4 μm and then decreases to 3.6 μm; compared with conventional rolled copper foils, the double-rolled copper foils exhibit a remarkably increased bending fatigue life, and the increased range is about 16.2%.展开更多
X-ray diffraction (XRD) analysis on different polished surfaces normal to the hot pressing direction reveals that the phase compositions of the polished surfaces from the outside to the inside are pure TiC, Ti_3AlC_2+...X-ray diffraction (XRD) analysis on different polished surfaces normal to the hot pressing direction reveals that the phase compositions of the polished surfaces from the outside to the inside are pure TiC, Ti_3AlC_2+TiC, pure Ti_3AlC_2 and Ti_2AlC+Ti_3AlC_2, no matter elemental powder or TiC is used as raw materials. It is found that ternary-layered carbide Ti_2AlC samples synthesized at 1500 ℃ by hot-pressing sintering are inhomogeneous and have a gradient structure.Electron probe X-ray micro-analysis (EPMA) indicates that the Al content along the hot pressing axis is parabolic, it is the highest in the center and the lowest at the both ends, while the Ti content is constant along the axis. The experimental result reveals that the evaporation of Al in samples in an open system during hot pressing sintering results in a gradient structure.展开更多
There is a pressing need for high-performance,high-strength low-alloy structural(HSLA)steels in various engineering fields,such as hydraulic components,engineering machinery,bridges,ships,and pressure vessels.In this ...There is a pressing need for high-performance,high-strength low-alloy structural(HSLA)steels in various engineering fields,such as hydraulic components,engineering machinery,bridges,ships,and pressure vessels.In this study,a gradient dislocation-cell structure is introduced into an HSLA steel through ultrasonic severe surface rolling.The cell size is approximately 614 nm at the topmost surface layer,and increases with increasing the depth.Most of the cell walls have a misorientation ranging from 2°to 15°,indicating they belong to low angle grain boundaries(LAGBs),while some cell walls have a misorientation of less than 2°,corresponding to dense dislocation walls(DDWs).This unique gradient structure offers an exceptional combination of strength and ductility,with a high yield strength of 522.3±1.4 MPa and an accepted elongation of 25.5±1.7%.The morphology and size of the dislocation cells remain remarkably stable after uniaxial tension,demonstrating their efficacy as effective barriers hindering dislocation movement and thus enhancing strength and hardness.This gradient dislocation-cell structure facilitates inhomogeneous plastic deformation during uniaxial tensile loading,resulting in a pronounced accumulation of geometrically necessary dislocations(GNDs).These GNDs play a significant role in conferring favorable mechanical properties by inducing hetero-deformation-induced(HDI)strengthening effects and forest hardening effects.This study presents a promising avenue for achieving the desired mechanical properties in HSLA steel.展开更多
Creating porous structures and gradient structures are two commonly used design strategies for terahertz(THz)absorption enhancement.However,the synergistic effect of porous structure and gradient structure on THz abso...Creating porous structures and gradient structures are two commonly used design strategies for terahertz(THz)absorption enhancement.However,the synergistic effect of porous structure and gradient structure on THz absorption still remains less explored.Here,we took an almost non-conductive porous carbon foam as raw material,and fabricated an integrated gradient porous carbon foam(PCF)by microwave selective sintering.The experimental results show that the synergistic effect of the porous and gradient structures resulted in a 140%improvement in THz absorption performance.Specifically,an excellent average absorption intensity of-38.8 dB(absorptivity is about 99.99%)is obtained in the frequency range from 0.5 to 4.0 THz.COMSOL simulation and transmission line model were applied to explore the formation mechanism and the gradient loss capabilities of gradient structure.This work not only reveals the synergistic enhancement mechanism of porous and gradient structures for the THz absorption,but also provides new insights into the design of high-performance THz absorbers in the future.展开更多
As a typical energetic composite,polytetrafluoroethylene(PTFE)/aluminum(Al)has been widely applied in explosives,pyrotechnics,and propellants due to its ultra-high energy density and intense exothermic reaction.In thi...As a typical energetic composite,polytetrafluoroethylene(PTFE)/aluminum(Al)has been widely applied in explosives,pyrotechnics,and propellants due to its ultra-high energy density and intense exothermic reaction.In this work,the radial gradient(RG)structure of PTFE/Al cylinders with three different PTFE morphologies(200 nm and 5μm particles and 5μm fiber)and content changes are prepared by 3D printing technology.The effect of radial gradient structure on the pressure output of PTFE/Al has been studied.Compared with the morphology change of PTFE,the change of component content in the gradient structure has an obvious effect on the pressure output of the PTFE/Al cylinder.Furthermore,the relationships of the morphology,content of PTFE and the combustion reaction of the PTFE/Al cylinder reveal that the cylinder shows a more complex flame propagation process than others.These results could provide a strategy to improve the combustion and pressure output of PTFE/Al.展开更多
Star-shaped lattice structures with a negative Poisson’s ratio(NPR)effect exhibit excellent energy absorption capacity,making them highly promising for applications in aerospace,vehicles,and civil protection.While pr...Star-shaped lattice structures with a negative Poisson’s ratio(NPR)effect exhibit excellent energy absorption capacity,making them highly promising for applications in aerospace,vehicles,and civil protection.While previous research has primarily focused on single-walled cells,there is limited investigation into negative Poisson’s ratio structures with nested multi-walled cells.This study designed three star-shaped cell structures and three lattice configurations,analyzing the Poisson’s ratio,stress–strain relationship,and energy absorption capacity through tensile experiments and finite element simulations.Among the single structures,the star-shaped configuration r3 demonstrated the best elastic modulus,NPR effect,and energy absorption effect.In contrast,the uniform lattice structure R3 exhibited the highest tensile strength and energy absorption capacity.Additionally,the stress intensity and energy absorption of gradient structures increased with the number of layers.This study aims to provide a theoretical reference for the application of NPR materials in safety protection across civil and vehicle engineering,as well as other fields.展开更多
Similar to other metallic materials,duplex stainless steel dramatically loses its advantage of high ductility as they are strengthened.Here,we produce a gradient nanograined dual-phase structure in the 2101 duplex sta...Similar to other metallic materials,duplex stainless steel dramatically loses its advantage of high ductility as they are strengthened.Here,we produce a gradient nanograined dual-phase structure in the 2101 duplex stainless steel,thus facilitating a superior strength-ductility synergy:a yield strength of 1009.5 MPa being two times higher than that of the as-received sample,a total elongation of 23.4%and a uniform elongation of 5.9%.This novel structure is produced through a processing route of ultrasonic severe surface rolling and annealing,which realizes a superposition of gradient nanostructure and lamellar dual-phase structure with austenite and ferrite.During the tension deformation of gradi-ent nanograined dual-phase structured duplex stainless steel,a significant accumulation of geometrically necessary dislocations occurs.These dislocations are formed to accommodate the deformation incompat-ibility caused by the layer-by-layer difference in strength and hardness of individual phase domains,as well as the inherent difference in properties between the austenite and ferrite domains.This results in a stronger hetero-deformation induced strengthening and hardening significantly contributing to superior mechanical properties.Our study provides a new avenue to develop advanced steels with high strength and ductility.展开更多
The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electrom...The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electromagnetic component regulation,layered arrangement structure,and gradient concentration distribution was used to optimize impedance matching and enhance electromagnetic loss.On the microscale,the incorporation of magnetic Ni nanoparticles into MXene nanosheets(Ni@MXene)endows suitable intrinsic permittivity and permeability.On the macroscale,the layered arrangement of Ni@MXene increases the effective interaction area with electromagnetic waves,inducing multiple reflection/scattering effects.On this basis,according to the analysis of absorption,reflection,and transmission(A-R-T)power coefficients of layered composites,the gradient concentration distribution was constructed to realize the impedance matching at low-concentration surface layer,electromagnetic loss at middle concentration interlayer and microwave reflection at high-concentration bottom layer.Consequently,the layered gradient composite(LG5-10-15)achieves complete absorption coverage of X-band at thickness of 2.00-2.20 mm with RL_(min) of-68.67 dB at 9.85 GHz in 2.05 mm,which is 199.0%,12.6%,and 50.6%higher than non-layered,layered and layered descending gradient composites,respectively.Therefore,this work confirms the importance of layered gradient structure in improving absorption performance and broadens the design of high-performance microwave absorption materials.展开更多
The spoke as a key component has a significant impact on the performance of the non-pneumatic tire(NPT).The current research has focused on adjusting spoke structures to improve the single performance of NPT.Few studi...The spoke as a key component has a significant impact on the performance of the non-pneumatic tire(NPT).The current research has focused on adjusting spoke structures to improve the single performance of NPT.Few studies have been conducted to synergistically improve multi-performance by optimizing the spoke structure.Inspired by the concept of functionally gradient structures,this paper introduces a functionally gradient honeycomb NPT and its optimization method.Firstly,this paper completes the parameterization of the honeycomb spoke structure and establishes the numerical models of honeycomb NPTs with seven different gradients.Subsequently,the accuracy of the numerical models is verified using experimental methods.Then,the static and dynamic characteristics of these gradient honeycomb NPTs are thoroughly examined by using the finite element method.The findings highlight that the gradient structure of NPT-3 has superior performance.Building upon this,the study investigates the effects of key parameters,such as honeycomb spoke thickness and length,on load-carrying capacity,honeycomb spoke stress and mass.Finally,a multi-objective optimization method is proposed that uses a response surface model(RSM)and the Nondominated Sorting Genetic Algorithm-II(NSGA-II)to further optimize the functional gradient honeycomb NPTs.The optimized NPT-OP shows a 23.48%reduction in radial stiffness,8.95%reduction in maximum spoke stress and 16.86%reduction in spoke mass compared to the initial NPT-1.The damping characteristics of the NPT-OP have also been improved.The results offer a theoretical foundation and technical methodology for the structural design and optimization of gradient honeycomb NPTs.展开更多
Bone-mimicking gradient porous NiTi shape memory alloys(SMAs)are promising for orthopedic im-plants due to their distinctive superelastic functional properties.However,premature plastic deformation in weak areas such ...Bone-mimicking gradient porous NiTi shape memory alloys(SMAs)are promising for orthopedic im-plants due to their distinctive superelastic functional properties.However,premature plastic deformation in weak areas such as thinner struts,nodes,and sharp corners severely deteriorates the superelasticity of gradient porous NiTi SMAs.In this work,we prepared gradient porous NiTi SMAs with a porosity of 50%by additive manufacturing(AM)and achieved a remarkable improvement of superelasticity by a simple solution treatment regime.After solution treatment,phase transformation temperatures dropped signif-icantly,the dislocation density decreased,and partial intergranular Ti-rich precipitates were transferred into the grain.Compared to as-built samples,the strain recovery rate of solution-treated samples was nearly doubled at a pre-strain of 6%(up to 90%),and all obtained a stable recoverable strain of more than 4%.The remarkable superelasticity improvement was attributed to lower phase transformation tem-peratures,fewer dislocations,and the synergistic strengthening effect of intragranular multi-scale Ti-Ni precipitates.Notably,the gradient porous structure played a non-negligible role in both superelasticity deterioration and improvement.The microstructure evolution of the solution-treated central strut after constant 10 cycles and the origin of the stable superelastic response of gradient porous NiTi SMAs were revealed.This work provides an accessible strategy for improving the superelastic performance of gra-dient porous NiTi SMAs and proposes a key strategy for achieving such high-performance architectured materials.展开更多
The impedance matching of absorbers is a vital factor affecting their microwave absorption(MA)properties.In this work,we controllably synthesized Material of Institute Lavoisier 88C(MIL-88C)with varying aspect ratios(...The impedance matching of absorbers is a vital factor affecting their microwave absorption(MA)properties.In this work,we controllably synthesized Material of Institute Lavoisier 88C(MIL-88C)with varying aspect ratios(AR)as a precursor by regulating oil bath conditions,followed by one-step thermal decomposition to obtain carbon-coated iron-based composites.Modifying the precursor MIL-88C(Fe)preparation conditions,such as the molar ratio between metal ions and organic ligands(M/O),oil bath temperature,and oil bath time,influenced the phases,graphitization degree,and AR of the derivatives,enabling low filler loading,achieving well-matched impedance,and ensuring outstanding MA properties.The MOF-derivatives 2(MD_(2))/polyvinylidene Difluoride(PVDF),MD_(3)/PVDF,and MD4/PVDF absorbers all exhibited excellent MA properties with optimal filler loadings below 20 wt%and as low as 5 wt%.The MD_(2)/PVDF(5 wt%)achieved a maximum effective absorption bandwidth(EAB)of 5.52 GHz(1.90 mm).The MD_(3)/PVDF(10 wt%)possessed a minimum reflection loss(RL_(min))value of−67.4 at 12.56 GHz(2.13 mm).A symmetric gradient honeycomb structure(SGHS)was constructed utilizing the high-frequency structure simulator(HFSS)to further extend the EAB,achieving an EAB of 14.6 GHz and a RL_(min) of−59.0 dB.This research offers a viable inspiration to creating structures or materials with high-efficiency MA properties.展开更多
The high variability of shock in terrorist attacks poses a threat to people's lives and properties,necessitating the development of more effective protective structures.This study focuses on the angle gradient and...The high variability of shock in terrorist attacks poses a threat to people's lives and properties,necessitating the development of more effective protective structures.This study focuses on the angle gradient and proposes four different configurations of concave hexagonal honeycomb structures.The structures'macroscopic deformation behavior,stress-strain relationship,and energy dissipation characteristics are evaluated through quasi-static compression and Hopkinson pressure bar impact experiments.The study reveals that,under varying strain rates,the structures deform starting from the weak layer and exhibit significant interlayer separation.Additionally,interlayer shear slip becomes more pronounced with increasing strain rate.In terms of quasi-static compression,symmetric gradient structures demonstrate superior energy absorption,particularly the symmetric negative gradient structure(SNG-SMS)with a specific energy absorption of 13.77 J/cm~3.For dynamic impact,unidirectional gradient structures exhibit exceptional energy absorption,particularly the unidirectional positive gradient honeycomb structure(UPG-SML)with outstanding mechanical properties.The angle gradient design plays a crucial role in determining the structure's stability and deformation mode during impact.Fewer interlayer separations result in a more pronounced negative Poisson's ratio effect and enhance the structure's energy absorption capacity.These findings provide a foundation for the rational design and selection of seismic protection structures in different strain rate impact environments.展开更多
Ceramic matrix composites(CMC)are widely utilized in high-temperature components of aero-engines for load-bearing and electromagnetic stealth synergy due to their superior toughening and designable electromagnetic pro...Ceramic matrix composites(CMC)are widely utilized in high-temperature components of aero-engines for load-bearing and electromagnetic stealth synergy due to their superior toughening and designable electromagnetic properties.However,the design of ultra-broadband electromagnetic wave(EMW)absorp-tion at thin thicknesses(d<10 mm)has been difficult and focused,especially the design of metama-terial.Inspired by 3D printing technology and the structural characteristic of 2D CMC,this study inge-niously devised and proposed a novel carbon fiber gradient periodic structure in Al_(2)O_(3f)/SiOC composites to enhance the ultra-broadband EMW absorption properties at a wide temperature range.By optimizing the geometric structure parameters,the Al_(2)O_(3f)/SiOC composites with the carbon fiber gradient periodic structure have exhibited exceptional ultra-broadband EMW absorption properties at elevated tempera-tures and excellent mechanical performance.The composites have attained a minimum reflection loss(RLmin)of-30 dB and a high absorption efficiency of more than 84%,ranging from 9.3 to 40 GHz at a thickness of 9 mm.Due to the temperature insensitivity of discrete periodic structures,the composites can adapt to high temperatures up to 700℃.Additionally,compared to the Al_(2)O_(3f)/SiOC composites,the flexural strength and fracture toughness of the Al_(2)O_(3f)/SiOC composites with carbon fiber gradient peri-odic structure have significantly increased to 398 MPa and 15.6 MPa m1/2,respectively.This work breaks through the limitation of the design and fabrication of 3D periodic structures in CMC,creating a novel oxide-CMC with ultra-broadband EMW absorption properties at a wide temperature range and enhanced mechanical properties.展开更多
Moisture can be utilized as a tremendous source of electricity by emerging moisture-electric generator (MEG). The directional moving of water molecules, which can be driven by gradient of functional groups and water e...Moisture can be utilized as a tremendous source of electricity by emerging moisture-electric generator (MEG). The directional moving of water molecules, which can be driven by gradient of functional groups and water evaporation, is vital for the electricity generation. Here, MEG composed of Graphene Oxide (GO-MEG) with gradient channels is constructed by one-step ice-templating technique, achieving a voltage of 0.48 V and a current of ~ 5.64 µA under humid condition. The gradient channels introduce Laplace pressure difference to the absorbed water droplets and electric potential between two side of the GO-MEG, facilitating the charge flow. Output voltage can be easily enhanced by increasing the structural gradient, reducing the channel size, incorporation of chemical gradient, or scaling up the number of GO-MEG units in series. This work not only provides insight for the working mechanism of GO-MEG with structural gradient, which can be applied to other functional materials, but also establishes a convenient and ecofriendly strategy to construct and finely tune the structural gradient in porous materials.展开更多
文摘Phase change heat transfer devices like heat pipes are widely utilized in temperature control and heat transfer.However,the traditional single uniform wick makes it hard to meet the requirements of capillary pressure and permeability for high-performance heat pipes,thus limiting the improvement of heat transfer performance.In this paper,a gradient structure wick sintered by 316 L stainless steel powder is designed.The capillary performance is tested and characterized through permeability test experiments and capillary rise infrared test experiments.Moreover,the influence of different particle sizes of sintered powder on the capillary performance of the wick structure is studied.The experimental results indicate that the capillary pressure and permeability of the gradient structure wick are significantly improved compared with the traditional single structure wick.Its capillary performance parameter S(K·Pcap)is enhanced by more than 30%,providing an effective alternative for the wick of two-phase heat exchange devices.
文摘The effects of gradient structure on the microstructure and properties of coated cemented carbides were researched with optical microscopy （OM）, scanning electron microscopy （SEM）, strength measurements, and cutting tests. It shows that vacuum sintering of WC-Ti（C, N）-TaC-Co cemented carbides results in the formation of a surface ductile zone. The ductile zone prevents crack propagation and leads to the increase of transverse rupture strength of the substrate. The impact resistance of coated gradient inserts was obviously improved on the basis of maintaining resistance to abrasion and the forming mechanism of the gradient structure was also analyzed.
基金This work was financially supported by National Natural Science Foundation of China(Grant Nos.11772268 and 12025205).The authors would like to appreciate the researchers in Nanjing university of science and technology for their support in preparation of gradient structured materials.
文摘Gradient nanostructure was introduced to enhance the strength and ductility via deformation incompatibility accommodated by geometrical necessary dislocations for most metallic materials recently.However,few intensive researches were carried out to investigate the effect of gradient structure on the deformation twin evolution and resulting performance improvements.In the present paper,we produced gradient-structured AZ31 Mg alloy with fine-grain layers,parallel twin laminates and a coarse-grain core from two upmost surfaces to the center of plate.Surprisingly,this architected Mg alloy exhibited simultaneous enhancement of strength and ductility.Subsequent microstructural observations demonstrated that abundant twin-twin interactions resulting from higher strength and multi-axial stress state could make great contributions to the increase of work-hardening capability.This was further proved by the measurement of full-field strain evolution during the plastic deformation.Such a design strategy may provide a new path for producing advanced structure materials in which the deformation twinning works as one of the dominant plasticity mechanisms.
基金the support of Qilu Young Talent Program from Shandong University and the State Key Lab of Advanced Metals and Materials (No.2021-Z10)the financial support from the Scientific Research Program Funded by Shaanxi Provincial Education Department (No.19JK0039)
文摘Multi-principal-element alloys(MPEAs)are attracting increasing attentions because of their high strength and ductility,high fracture toughness,excellent corrosion resistance,outstanding thermal-softening resistance and high oxidation resistance.Moreover,gradient structures(GSs)have been shown to be effective in alleviating the strength-ductility trade-off although strength and ductility are mutually exclusive properties for metals,which provides an opportunity for developing highperformance MPEAs.Here,we summarized four processing methods for creating GSs in MPEAs,including rotationally accelerated shot peening(RASP),ultra-precision machining technology(UPMT),cyclic dynamic torsion(CDT),and ultrasonic surface rolling processing(USRP).Principles,advantages,disadvantages,and typical applications of these methods are discussed in this work.
基金supports from the National Natural Science Foundation of China (Grant No. 51301092)Pangu Foundation are acknowledged
文摘A new technology-rotationally accelerated shot peening（RASP）, was developed to prepare gradient structured materials. By using centrifugal acceleration principle and large steel balls, the RASP technology can produce much higher impact energy compared to conventional shot peening. As a proof-of-concept demonstration, the RASP was utilized to refine the surface layer in pure copper（Cu） with an average grain size of 85 nm. The grain size increases largely from surface downwards the bulk, forming an800 ？m thick gradient-structured surface layer and consequently a micro-hardness gradient. The difference between the RASP technology and other established techniques in preparing gradient structured materials is discussed. The RASP technology exhibits a promoting future for large-scale manufacturing of gradient materials.
基金financially supported by the National Key Research and Development Program of China(No.2017YFB0702003)the National Natural Science Foundation of China(No.51871217)support from the Youth Innovation Promotion Association,Chinese Academy of Sciences(No.2020194)。
文摘Nanocrystalline metals with high Gibbs free energy have a strong tendency towards thermally driven grain growth,thus understanding the critical size or temperature of grain growth is vital for their applications.The investigations of thermal stability were usually conducted on the materials with a homogeneous structure;however,these methods are time-consuming and expensive.In the present work,we reveal a high-throughput experimental strategy to characterize the size-dependent thermal stability via annealing the gradient structured Ni.Employing this method,the critical size of grain growth(d_(c))at a given annealing temperature was rapidly determined.The critical size of grain growth was~95 nm when annealed at 503 K for 3 h,which is consistent with the value reported in the homogeneous structured Ni.Furthermore,this critical size was found to be identical in three types of gradient structured Ni,i.e.,independent on the gradient structure.Our present work demonstrates a high-throughput strategy for exploring the critical size of grain growth and size-dependent thermal stability of metals.
基金financially support by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China (No.2011BAE23B02)the Fundamental Research Funds for the Central Universities of China (No.FRF-TP-10-002B)
文摘Copper foils with gradient structure in thickness direction and different roughnesses on two surfaces were fabricated by double rolling. The two surface morphologies of double-rolled copper foils are quite different, and the surface roughness values are 61 and 1095 nm, respectively. The roughness value of matt surface can meet the requirement for bonding the resin matrix with copper foils used for flexible printed circuit boards, thus may omit traditional roughening treatment; the microstructure of double-rolled copper foils demonstrates an obviously asymmetric gradient feature. From bright surface to matt surface in thickness direction, the average grain size first increases from 2.3 to 7.4 μm and then decreases to 3.6 μm; compared with conventional rolled copper foils, the double-rolled copper foils exhibit a remarkably increased bending fatigue life, and the increased range is about 16.2%.
文摘X-ray diffraction (XRD) analysis on different polished surfaces normal to the hot pressing direction reveals that the phase compositions of the polished surfaces from the outside to the inside are pure TiC, Ti_3AlC_2+TiC, pure Ti_3AlC_2 and Ti_2AlC+Ti_3AlC_2, no matter elemental powder or TiC is used as raw materials. It is found that ternary-layered carbide Ti_2AlC samples synthesized at 1500 ℃ by hot-pressing sintering are inhomogeneous and have a gradient structure.Electron probe X-ray micro-analysis (EPMA) indicates that the Al content along the hot pressing axis is parabolic, it is the highest in the center and the lowest at the both ends, while the Ti content is constant along the axis. The experimental result reveals that the evaporation of Al in samples in an open system during hot pressing sintering results in a gradient structure.
基金Supported by National Natural Science Foundation of China(Grant No.U1910212)the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘There is a pressing need for high-performance,high-strength low-alloy structural(HSLA)steels in various engineering fields,such as hydraulic components,engineering machinery,bridges,ships,and pressure vessels.In this study,a gradient dislocation-cell structure is introduced into an HSLA steel through ultrasonic severe surface rolling.The cell size is approximately 614 nm at the topmost surface layer,and increases with increasing the depth.Most of the cell walls have a misorientation ranging from 2°to 15°,indicating they belong to low angle grain boundaries(LAGBs),while some cell walls have a misorientation of less than 2°,corresponding to dense dislocation walls(DDWs).This unique gradient structure offers an exceptional combination of strength and ductility,with a high yield strength of 522.3±1.4 MPa and an accepted elongation of 25.5±1.7%.The morphology and size of the dislocation cells remain remarkably stable after uniaxial tension,demonstrating their efficacy as effective barriers hindering dislocation movement and thus enhancing strength and hardness.This gradient dislocation-cell structure facilitates inhomogeneous plastic deformation during uniaxial tensile loading,resulting in a pronounced accumulation of geometrically necessary dislocations(GNDs).These GNDs play a significant role in conferring favorable mechanical properties by inducing hetero-deformation-induced(HDI)strengthening effects and forest hardening effects.This study presents a promising avenue for achieving the desired mechanical properties in HSLA steel.
基金supported by National Key Research and Development Program of China(No.2023YFB3811305)National Natural Science Foundation of China(No.62235004,61831012,62311530115,62131006)+2 种基金Sichuan Science and Technology Support Program(2021JDTD0026,2023JDGD0012)the Shenzhen Science and Technology Program(No.(2021)105)the Swedish Research Council(No.2022-00211).
文摘Creating porous structures and gradient structures are two commonly used design strategies for terahertz(THz)absorption enhancement.However,the synergistic effect of porous structure and gradient structure on THz absorption still remains less explored.Here,we took an almost non-conductive porous carbon foam as raw material,and fabricated an integrated gradient porous carbon foam(PCF)by microwave selective sintering.The experimental results show that the synergistic effect of the porous and gradient structures resulted in a 140%improvement in THz absorption performance.Specifically,an excellent average absorption intensity of-38.8 dB(absorptivity is about 99.99%)is obtained in the frequency range from 0.5 to 4.0 THz.COMSOL simulation and transmission line model were applied to explore the formation mechanism and the gradient loss capabilities of gradient structure.This work not only reveals the synergistic enhancement mechanism of porous and gradient structures for the THz absorption,but also provides new insights into the design of high-performance THz absorbers in the future.
基金supported by the National Natural Science Foundation of China(Grant Nos.11872341 and 22075261)。
文摘As a typical energetic composite,polytetrafluoroethylene(PTFE)/aluminum(Al)has been widely applied in explosives,pyrotechnics,and propellants due to its ultra-high energy density and intense exothermic reaction.In this work,the radial gradient(RG)structure of PTFE/Al cylinders with three different PTFE morphologies(200 nm and 5μm particles and 5μm fiber)and content changes are prepared by 3D printing technology.The effect of radial gradient structure on the pressure output of PTFE/Al has been studied.Compared with the morphology change of PTFE,the change of component content in the gradient structure has an obvious effect on the pressure output of the PTFE/Al cylinder.Furthermore,the relationships of the morphology,content of PTFE and the combustion reaction of the PTFE/Al cylinder reveal that the cylinder shows a more complex flame propagation process than others.These results could provide a strategy to improve the combustion and pressure output of PTFE/Al.
基金support of the National Natural Science Foundation of China(12202038)the Fundamental Research Funds for the Central Universities(FRF-TP-22-028A1).
文摘Star-shaped lattice structures with a negative Poisson’s ratio(NPR)effect exhibit excellent energy absorption capacity,making them highly promising for applications in aerospace,vehicles,and civil protection.While previous research has primarily focused on single-walled cells,there is limited investigation into negative Poisson’s ratio structures with nested multi-walled cells.This study designed three star-shaped cell structures and three lattice configurations,analyzing the Poisson’s ratio,stress–strain relationship,and energy absorption capacity through tensile experiments and finite element simulations.Among the single structures,the star-shaped configuration r3 demonstrated the best elastic modulus,NPR effect,and energy absorption effect.In contrast,the uniform lattice structure R3 exhibited the highest tensile strength and energy absorption capacity.Additionally,the stress intensity and energy absorption of gradient structures increased with the number of layers.This study aims to provide a theoretical reference for the application of NPR materials in safety protection across civil and vehicle engineering,as well as other fields.
基金supported by the National Natural Science Foundation of China(Nos.51974032,52174355,51874043,and 51604034)the Jilin Scientific and Technological Develop-ment Program(Nos.20220201106GX and YDZJ202201ZYTS669).
文摘Similar to other metallic materials,duplex stainless steel dramatically loses its advantage of high ductility as they are strengthened.Here,we produce a gradient nanograined dual-phase structure in the 2101 duplex stainless steel,thus facilitating a superior strength-ductility synergy:a yield strength of 1009.5 MPa being two times higher than that of the as-received sample,a total elongation of 23.4%and a uniform elongation of 5.9%.This novel structure is produced through a processing route of ultrasonic severe surface rolling and annealing,which realizes a superposition of gradient nanostructure and lamellar dual-phase structure with austenite and ferrite.During the tension deformation of gradi-ent nanograined dual-phase structured duplex stainless steel,a significant accumulation of geometrically necessary dislocations occurs.These dislocations are formed to accommodate the deformation incompat-ibility caused by the layer-by-layer difference in strength and hardness of individual phase domains,as well as the inherent difference in properties between the austenite and ferrite domains.This results in a stronger hetero-deformation induced strengthening and hardening significantly contributing to superior mechanical properties.Our study provides a new avenue to develop advanced steels with high strength and ductility.
基金support for this work by Key Research and Development Project of Henan Province(Grant.No.241111232300)the National Natural Science Foundation of China(Grant.No.52273085 and 52303113)the Open Fund of Yaoshan Laboratory(Grant.No.2024003).
文摘The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electromagnetic component regulation,layered arrangement structure,and gradient concentration distribution was used to optimize impedance matching and enhance electromagnetic loss.On the microscale,the incorporation of magnetic Ni nanoparticles into MXene nanosheets(Ni@MXene)endows suitable intrinsic permittivity and permeability.On the macroscale,the layered arrangement of Ni@MXene increases the effective interaction area with electromagnetic waves,inducing multiple reflection/scattering effects.On this basis,according to the analysis of absorption,reflection,and transmission(A-R-T)power coefficients of layered composites,the gradient concentration distribution was constructed to realize the impedance matching at low-concentration surface layer,electromagnetic loss at middle concentration interlayer and microwave reflection at high-concentration bottom layer.Consequently,the layered gradient composite(LG5-10-15)achieves complete absorption coverage of X-band at thickness of 2.00-2.20 mm with RL_(min) of-68.67 dB at 9.85 GHz in 2.05 mm,which is 199.0%,12.6%,and 50.6%higher than non-layered,layered and layered descending gradient composites,respectively.Therefore,this work confirms the importance of layered gradient structure in improving absorption performance and broadens the design of high-performance microwave absorption materials.
基金Supported by National Natural Science Foundation of China(Grant Nos.52072156,52272366)Postdoctoral Foundation of China(Grant No.2020M682269).
文摘The spoke as a key component has a significant impact on the performance of the non-pneumatic tire(NPT).The current research has focused on adjusting spoke structures to improve the single performance of NPT.Few studies have been conducted to synergistically improve multi-performance by optimizing the spoke structure.Inspired by the concept of functionally gradient structures,this paper introduces a functionally gradient honeycomb NPT and its optimization method.Firstly,this paper completes the parameterization of the honeycomb spoke structure and establishes the numerical models of honeycomb NPTs with seven different gradients.Subsequently,the accuracy of the numerical models is verified using experimental methods.Then,the static and dynamic characteristics of these gradient honeycomb NPTs are thoroughly examined by using the finite element method.The findings highlight that the gradient structure of NPT-3 has superior performance.Building upon this,the study investigates the effects of key parameters,such as honeycomb spoke thickness and length,on load-carrying capacity,honeycomb spoke stress and mass.Finally,a multi-objective optimization method is proposed that uses a response surface model(RSM)and the Nondominated Sorting Genetic Algorithm-II(NSGA-II)to further optimize the functional gradient honeycomb NPTs.The optimized NPT-OP shows a 23.48%reduction in radial stiffness,8.95%reduction in maximum spoke stress and 16.86%reduction in spoke mass compared to the initial NPT-1.The damping characteristics of the NPT-OP have also been improved.The results offer a theoretical foundation and technical methodology for the structural design and optimization of gradient honeycomb NPTs.
基金the financial support of the National Natural Science Foundation under Grant No.52274387project support by the Shanghai Science and Technology Com-mission(Grant No.20S31900100).
文摘Bone-mimicking gradient porous NiTi shape memory alloys(SMAs)are promising for orthopedic im-plants due to their distinctive superelastic functional properties.However,premature plastic deformation in weak areas such as thinner struts,nodes,and sharp corners severely deteriorates the superelasticity of gradient porous NiTi SMAs.In this work,we prepared gradient porous NiTi SMAs with a porosity of 50%by additive manufacturing(AM)and achieved a remarkable improvement of superelasticity by a simple solution treatment regime.After solution treatment,phase transformation temperatures dropped signif-icantly,the dislocation density decreased,and partial intergranular Ti-rich precipitates were transferred into the grain.Compared to as-built samples,the strain recovery rate of solution-treated samples was nearly doubled at a pre-strain of 6%(up to 90%),and all obtained a stable recoverable strain of more than 4%.The remarkable superelasticity improvement was attributed to lower phase transformation tem-peratures,fewer dislocations,and the synergistic strengthening effect of intragranular multi-scale Ti-Ni precipitates.Notably,the gradient porous structure played a non-negligible role in both superelasticity deterioration and improvement.The microstructure evolution of the solution-treated central strut after constant 10 cycles and the origin of the stable superelastic response of gradient porous NiTi SMAs were revealed.This work provides an accessible strategy for improving the superelastic performance of gra-dient porous NiTi SMAs and proposes a key strategy for achieving such high-performance architectured materials.
基金financially supported by the National Natural Science Foundation of China(51972049,52073010,and 52373259)the Projects of the Science and Technology Department of Jilin Province(20230201132GX)the Projects of the Education Department of Jilin Province(JJKH20220123KJ)。
文摘The impedance matching of absorbers is a vital factor affecting their microwave absorption(MA)properties.In this work,we controllably synthesized Material of Institute Lavoisier 88C(MIL-88C)with varying aspect ratios(AR)as a precursor by regulating oil bath conditions,followed by one-step thermal decomposition to obtain carbon-coated iron-based composites.Modifying the precursor MIL-88C(Fe)preparation conditions,such as the molar ratio between metal ions and organic ligands(M/O),oil bath temperature,and oil bath time,influenced the phases,graphitization degree,and AR of the derivatives,enabling low filler loading,achieving well-matched impedance,and ensuring outstanding MA properties.The MOF-derivatives 2(MD_(2))/polyvinylidene Difluoride(PVDF),MD_(3)/PVDF,and MD4/PVDF absorbers all exhibited excellent MA properties with optimal filler loadings below 20 wt%and as low as 5 wt%.The MD_(2)/PVDF(5 wt%)achieved a maximum effective absorption bandwidth(EAB)of 5.52 GHz(1.90 mm).The MD_(3)/PVDF(10 wt%)possessed a minimum reflection loss(RL_(min))value of−67.4 at 12.56 GHz(2.13 mm).A symmetric gradient honeycomb structure(SGHS)was constructed utilizing the high-frequency structure simulator(HFSS)to further extend the EAB,achieving an EAB of 14.6 GHz and a RL_(min) of−59.0 dB.This research offers a viable inspiration to creating structures or materials with high-efficiency MA properties.
基金financially supported by National Natural Science Foundation of China,China (Grant No.52022012)National Key R&D Program for Young Scientists of China,China (Grant No.2022YFC3080900)。
文摘The high variability of shock in terrorist attacks poses a threat to people's lives and properties,necessitating the development of more effective protective structures.This study focuses on the angle gradient and proposes four different configurations of concave hexagonal honeycomb structures.The structures'macroscopic deformation behavior,stress-strain relationship,and energy dissipation characteristics are evaluated through quasi-static compression and Hopkinson pressure bar impact experiments.The study reveals that,under varying strain rates,the structures deform starting from the weak layer and exhibit significant interlayer separation.Additionally,interlayer shear slip becomes more pronounced with increasing strain rate.In terms of quasi-static compression,symmetric gradient structures demonstrate superior energy absorption,particularly the symmetric negative gradient structure(SNG-SMS)with a specific energy absorption of 13.77 J/cm~3.For dynamic impact,unidirectional gradient structures exhibit exceptional energy absorption,particularly the unidirectional positive gradient honeycomb structure(UPG-SML)with outstanding mechanical properties.The angle gradient design plays a crucial role in determining the structure's stability and deformation mode during impact.Fewer interlayer separations result in a more pronounced negative Poisson's ratio effect and enhance the structure's energy absorption capacity.These findings provide a foundation for the rational design and selection of seismic protection structures in different strain rate impact environments.
基金supported by the National Key R&D Program of China(No.2022YFC2204500)the Aviation Science Foundation Project(No.2023Z055053001).
文摘Ceramic matrix composites(CMC)are widely utilized in high-temperature components of aero-engines for load-bearing and electromagnetic stealth synergy due to their superior toughening and designable electromagnetic properties.However,the design of ultra-broadband electromagnetic wave(EMW)absorp-tion at thin thicknesses(d<10 mm)has been difficult and focused,especially the design of metama-terial.Inspired by 3D printing technology and the structural characteristic of 2D CMC,this study inge-niously devised and proposed a novel carbon fiber gradient periodic structure in Al_(2)O_(3f)/SiOC composites to enhance the ultra-broadband EMW absorption properties at a wide temperature range.By optimizing the geometric structure parameters,the Al_(2)O_(3f)/SiOC composites with the carbon fiber gradient periodic structure have exhibited exceptional ultra-broadband EMW absorption properties at elevated tempera-tures and excellent mechanical performance.The composites have attained a minimum reflection loss(RLmin)of-30 dB and a high absorption efficiency of more than 84%,ranging from 9.3 to 40 GHz at a thickness of 9 mm.Due to the temperature insensitivity of discrete periodic structures,the composites can adapt to high temperatures up to 700℃.Additionally,compared to the Al_(2)O_(3f)/SiOC composites,the flexural strength and fracture toughness of the Al_(2)O_(3f)/SiOC composites with carbon fiber gradient peri-odic structure have significantly increased to 398 MPa and 15.6 MPa m1/2,respectively.This work breaks through the limitation of the design and fabrication of 3D periodic structures in CMC,creating a novel oxide-CMC with ultra-broadband EMW absorption properties at a wide temperature range and enhanced mechanical properties.
基金supported by National Natural Science Foundation of China(52373119,52105296,62161160311)National Key R&D Program of China(2022YFB4701000)Open Fund of Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration(Wuhan University)(EMPI2023020).
文摘Moisture can be utilized as a tremendous source of electricity by emerging moisture-electric generator (MEG). The directional moving of water molecules, which can be driven by gradient of functional groups and water evaporation, is vital for the electricity generation. Here, MEG composed of Graphene Oxide (GO-MEG) with gradient channels is constructed by one-step ice-templating technique, achieving a voltage of 0.48 V and a current of ~ 5.64 µA under humid condition. The gradient channels introduce Laplace pressure difference to the absorbed water droplets and electric potential between two side of the GO-MEG, facilitating the charge flow. Output voltage can be easily enhanced by increasing the structural gradient, reducing the channel size, incorporation of chemical gradient, or scaling up the number of GO-MEG units in series. This work not only provides insight for the working mechanism of GO-MEG with structural gradient, which can be applied to other functional materials, but also establishes a convenient and ecofriendly strategy to construct and finely tune the structural gradient in porous materials.
