Functionally graded cellular structures(FGCSs)have a multitude of applications to a wide range of industries.Utilising the ever-progressing technology of additive manufacturing(AM),FGCSs can be applied to control mate...Functionally graded cellular structures(FGCSs)have a multitude of applications to a wide range of industries.Utilising the ever-progressing technology of additive manufacturing(AM),FGCSs can be applied to control material grading and achieve the desired mechanical properties.The current study explores the design and optimisation of FGCSs for AM,with a focus on improving the compression and impact performance of below knee(BK)prosthetic limbs made of thermoplastic polyurethane(TPU).A multiscale research methodology integrating topology optimization(TO),finite element analysis(FEA),and design of experiments(Do E)was adopted to optimise lattice structures in terms of stiffness and lightweight properties.Two-unit cell designs were considered in the study:Schwarz P gyroid and body-centered cubic(BCC).Response surface methodology(RSM)was implemented to analyse the effect of minimum and maximum cell wall thickness,cell size,and unit cell type on the mechanical performance of TPU FGCS structures.The results indicated that a Schwarz P FGCS structure with cell size,minimum and maximum cell wall thickness of 6,0.9 and 2.8 mm,respectively,could be optimal for a compromise between performance and weight.In this optimized case,stiffness and volume fraction values of 684 N/mm and 0.64 were obtained,respectively.The study also presents a proof-of-concept design for a BK prosthetic damper,highlighting the potential of FGCSs to enhance patient comfort,reduce manufacturing costs,and enable personalised designs through 3D scanning and AM.The obtained results could be a step forward towards the incorporation of AM technologies in prosthetics,offering a pathway to lightweight,cost-effective,and functionally tailored solutions.展开更多
When micro/nano-scale gradient coatings are subject to large thermal gradients or high heat fluxes,the spatial size effect cannot be ignored.It is important to understand how the size effect influences the thermal fra...When micro/nano-scale gradient coatings are subject to large thermal gradients or high heat fluxes,the spatial size effect cannot be ignored.It is important to understand how the size effect influences the thermal fracture behavior of functionally graded coating/substrate structures.This study aims at analyzing the transient thermal fracture behavior of collinear interface cracks in functionally graded coating/substrate structures based on the nonlocal dual-phase-lag heat conduction model.By means of integral transform techniques,the mixed boundary problem is transformed into a set of singular integral equations,which are solved by the Chebyshev polynomials.The effects of the nonlocal parameter,coating thickness,crack spacing,and non-homogeneous parameters on the temperature and stress intensity factors(SIFs)are examined.The numerical results show that these parameters play an essential role in controlling the thermal fracture behavior of the structures,especially at micro/nano-scales.展开更多
We used hydrodynamic simulations and shock wave propagation theories to analyze the behavior of shock waves within Ti/Pt periodically modulated graded structures and their integration layers.The effects of the total n...We used hydrodynamic simulations and shock wave propagation theories to analyze the behavior of shock waves within Ti/Pt periodically modulated graded structures and their integration layers.The effects of the total number of periodic layers,the total thickness of graded materials and loading velocity on the integration layer thickness and behavior of pressure-strain rate were systematically investigated.The results reveal that,by adjusting the total number of periodically modulated layers,the total thickness of graded materials and loading velocity the pressure amplitudes of the reflected compressive and rarefaction waves at different interfaces of Ti/Pt periodically modulated graded materials can be precisely controlled.Furthermore,empirical structural design criteria for Ti/Pt periodically modulated graded materials are established.The thickness ratio variation between adjacent Ti/Pt layers in the periodic structure must exceed 0.32.After the collaborative design of the integration layer,Ti/Pt periodically modulated graded materials can achieve a controllable loading function with pressures ranging from 1.4 to 144 GPa and strain rates from 3.8×10^(4) to 1.7×10^(7) s^(–1).The outcomes of this research provide a theoretical and simulation basis for the optimized design of periodically modulated graded materials to be utilized in ramp compression experiments.展开更多
Functionally graded material(FGM)plates are widely used in various engineering structures owing to their tailor-made mechanical properties,whereas cracked homogeneous plates constitute a canonical setting in fracture ...Functionally graded material(FGM)plates are widely used in various engineering structures owing to their tailor-made mechanical properties,whereas cracked homogeneous plates constitute a canonical setting in fracture mechanics analysis.These two classes of problems respectively embody material non-uniformity and geometric discontinuity,thereby imposing more stringent requirements on numerical methods in terms of high-order field continuity and accurate defect representation.Based on the classical Kirchhoff-Love plate theory,a numerical manifold method(MLS-NMM)incorporating moving least squares(MLS)interpolation is developed for bending analysis of FGM plates and fracture simulation of homogeneous plates with defects.The method constructs an H^(2)-regular approximation with high-order continuous weighting functions and,combined with the separation of mathematical and physical covers,establishes a unified framework that accurately handles material gradients and cracks without mesh reconstruction.For the crack tip,a singular physical cover incorporating the Williams asymptotic field is introduced to achieve local enrichment,enabling the natural capture of displacement discontinuity and stress singularity.Stress intensity factors are extracted using the interaction integral method,and the dimensionless J-integral shows a maximum relative error below 1.2%compared with the reference solution.Numerical results indicate that MLS-NMM exhibits excellent convergence performance:using 676 mathematical nodes,the nondimensional central deflection of both FGM and homogeneous plates agrees with reference solutions with a maximum relative error below 0.81%,and no shear locking occurs.A systematic analysis reveals that for a simply supported on all four edges(SSSS)FGM square plate with a/h=10,the nondimensional central deflection increases by 212%as the gradient index nrises from 0 to 5.For a homogeneous plate containing a central crack with c/a=0.6,the nondimensional central deflection increases by approximately 46%compared with the intact plate.Under weak boundary constraints(e.g.,SFSF),the deformation is markedly amplified,with the deflection reaching more than three times that under strong constraints(SCSC).The proposed method provides an efficient,reconstruction-free numerical tool for high-accuracy bending and fracture analyses of FGM and cracked thin-plate structures.展开更多
Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properti...Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properties.The integration of FG materials with auxetic structures enhances their adaptability in advanced engineering applications.However,understanding their dynamic behavior under external excitations is essential for optimal design and structural reliability.Nonlinear interactions in such structures pose significant challenges in vibration analysis,necessitating robust analytical methods.This study presents a closed-form solution for the nonlinear forced vibration analysis of sandwich FG auxetic beams,offering an accurate and efficient method for predicting their dynamic response.The beam consists of two FG face sheets with material properties varying through the thickness and a re-entrant honeycomb auxetic core with an adjustable Poisson's ratio.The governing nonlinear equations of motion are derived using the first-order shear deformation theory(FSDT),the modified Gibson model,and the von Kármán relations,formulated through Hamilton's principle.A closed-form solution is obtained via the Galerkin method and multiple-scale technique.The results demonstrate that FG layers enable control of the overweight and dynamic response amplitude,with positive power law indexes reducing weight.Comparisons with finite element results confirm the accuracy of the proposed formulation.展开更多
The accurate mechanical analysis of thick-walled pressure vessel structures composed of advanced materials,such as hyperelastic and functionally graded materials(FGMs),is critical for ensuring their safety and optimiz...The accurate mechanical analysis of thick-walled pressure vessel structures composed of advanced materials,such as hyperelastic and functionally graded materials(FGMs),is critical for ensuring their safety and optimizing their design.However,conventional numerical methods can face challenges with the non-linearities inherent in hyperelasticity and the complex spatial variations in FGMs.This paper presents a novel hybrid numerical approach combining Physics-Informed Neural Networks(PINNs)with Finite Element Method(FEM)derived data for the robust analysis of thick-walled,axisymmetric,heterogeneous,hyperelastic pressure vessels with elliptical geometries.A PINN framework incorporating neo-Hookean constitutive relations is developed in MATLAB.To enhance training efficiency and accuracy,the PINN’s loss function is augmented with displacement data obtained from high-fidelity FEM simulations performed in ANSYS.The methodology is rigorously validated by comparing PINN-predicted displacement and von Mises stress fields against ANSYS benchmarks for various scenarios of FGMconfigurations(with material properties varying according to a power law)subjected to internal and external pressurization.The results demonstrate excellent agreement between the proposed hybrid PINN-FEMapproach and conventional FEMsolutions across all test cases,accurately capturing complex deformation patterns and stress concentrations.This study highlights the potential of data-augmented PINNs as an effective and accurate computational tool for tackling complex solid mechanics problems involving non-linearmaterials and significant heterogeneity,offering a promising avenue for future research in engineering design and analysis.展开更多
The good combination of mechanical and wear properties for cemented carbides is crucial.In this work,the wear behavior of functionally graded cemented carbide(FGCC)and non-graded cemented carbide(CC),with CoNiFeCr mul...The good combination of mechanical and wear properties for cemented carbides is crucial.In this work,the wear behavior of functionally graded cemented carbide(FGCC)and non-graded cemented carbide(CC),with CoNiFeCr multi-principal-element alloy(MPEA)binder,has been investigated by performing sliding wear tests and composition characterization.The results showed that compared with CC,FGCC had higher hardness,stronger fracture toughness,better wear performance,and similar TRS.FGCCs exhibited lower wear rates(3.44×10^(−7)–6.95×10^(−6)mm^(3)/(N m))and coefficients of friction(COFs)(0.27–0.39)than CCs from RT to 600℃due to mitigation of multiple risks caused by binder removal,fragmentation and pull-out of WC grains,high-temperature oxidation and softening.In the low-temperature wear stage,the MPEA binder underwent dynamic recrystallization(DRX)and twinning deformation before removing from the surface.The binder removal caused dislocation pile-ups and stacking faults(SFs)to form under high stress,resulting in fragmentation and pull-out of WC grains.The low-temperature wear was dominated by abrasive wear and adhesive wear,with a low wear rate and a high and unstable COF.In the high-temperature wear stage,initial pitting oxidation of WC grains generated many subgrain boundaries,reducing heat transfer and exacerbating oxidation,resulting in an oxide layer enriched with WO3,Mx Oy,and MWO4.High-temperature wear was dominated by oxidation wear and high-temperature softening,with a high wear rate and a low and smooth COF.The results from the present study do not only provide theoretical guidance for an understanding of the antiwear mechanism of WC-CoNiFeCr,but also a new approach for the preparation of cemented carbides with high wear resistance.展开更多
It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and ...It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and electromagnetic radiation(EMR),uniaxial hierarchical cyclic loading and unloading tests were carried out on sandstones with different fracture numbers under dry,natural and saturated water content,to explore the fracture propagation,failure precursor characteristics and damage response mechanism under the influence of water content effect.The results show that with the increase of water content,the peak stress and crack initiation stress decrease gradually,and the decreases are 15.28%-21.11%and 17.64%-23.04%,respectively.The peak strain and crack initiation strain increase gradually,and the increases are 19.85%-44.53%and 19.15%-41.94%,respectively.The precracked rock with different water content is mainly characterized by tensile failure at different loading stages.However,with the increase of water content,the proportion of shear cracks gradually increases,while acoustic emission events gradually decrease,the dissipative energy and energy storage limits of the rock under peak load gradually decrease,and the charge signal increases significantly,which is because the lubrication effect of water reduces the friction coefficient between crack surfaces.展开更多
The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to ...The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to achieving controllable stress-strain rate loading.In this study,we have,for the first time,combined one-dimensional fluid computational software with machine learning methods.We first elucidated the mechanisms by which GDI structures control stress and strain rates.Subsequently,we constructed a machine learning model to create a structure-property response surface.The results show that altering the loading velocity and interlayer thickness has a pronounced regulatory effect on stress and strain rates.In contrast,the impedance distribution index and target thickness have less significant effects on stress regulation,although there is a matching relationship between target thickness and interlayer thickness.Compared with traditional design methods,the machine learning approach offers a10^(4)—10^(5)times increase in efficiency and the potential to achieve a global optimum,holding promise for guiding the design of GDI.展开更多
BACKGROUND Endoscopic submucosal dissection(ESD)has become a widely accepted,minimally invasive treatment for gastrointestinal submucosal tumors.It has been reported that humanistic nursing care with graded psychologi...BACKGROUND Endoscopic submucosal dissection(ESD)has become a widely accepted,minimally invasive treatment for gastrointestinal submucosal tumors.It has been reported that humanistic nursing care with graded psychological interventions can effectively enhance patients’physical activity in patients,reduce postoperative complications,and improve their postoperative quality of life.AIM To investigate the effects of combining humanistic care with graded psychological support on nursing satisfaction and quality of life in patients undergoing ESD for gastrointestinal submucosal tumors.METHODS A retrospective analysis was conducted on the clinical data of 180 patients who underwent ESD surgery for gastrointestinal submucosal tumors at our hospital between March 2021 and February 2023.Patients were allocated into groups based on the nursing care they received:The control group,which received routine care(n=90),and the observation group,which was subjected to humanistic nursing care in combination with graded psychological support(n=90).Patient anxiety and depression were assessed using the self-rating anxiety scale(SAS)and self-rating depression scale(SDS).Quality of life was evaluated using the shortform 36 health survey,and additional indications such as time to first food intake,surgery duration,length of hospital stay,nursing satisfaction,and adverse reactions were also recorded.Data was analyzed using SPSS22.0,with t-tests employed for continuous variables andχ2 tests for categorical data.RESULTS Patients in the observation group experienced significantly shorter times to first postoperative meal,surgery,and hospital stay compared to the control group.After the intervention,the SAS score of the observation group was 43.17±5.68,and the SDS score was 41.57±6.52,both significantly lower than those of the control group,with SAS score of 52.38±5.21 and SDS score of 51.23±8.25.In addition,the observation group scored significantly higher in daily living,physical function,psychological well-being,and social functioning(80.01±6.39,83.59±6.89,81.69±5.34,and 85.23±6.05,respectively).Moreover,the observation group also exhibited higher satisfaction and selfefficacy scores and a lower incidence of adverse reactions compared to the control group(P<0.05).CONCLUSION For patients undergoing ESD for gastrointestinal submucosal tumors,humanistic nursing care in combination with graded psychological nursing care significantly shorten the times to first postoperative meal,surgery,and hospital stay,effectively alleviates anxiety and depression,improves quality of life and nursing satisfaction,and mitigate the incidence of adverse reactions.展开更多
Fe-Mo functionally graded materials(FGMs)with different composition-change rates from 100%304 stainless steel to 100%Mo along the composition gradient direction were prepared by electron beam-directed energy depositio...Fe-Mo functionally graded materials(FGMs)with different composition-change rates from 100%304 stainless steel to 100%Mo along the composition gradient direction were prepared by electron beam-directed energy deposition(EB-DED)technique,including three samples with composition mutation of 100%,composition change rate of 10%and 30%.Results show that the composition-change rate significantly affects the microstructure and mechanical properties of the samples.In the sample with abrupt change of composition,the sharp shift in composition between 304 stainless steel and Mo leads to a great difference in the microstructure and hardness near the interface between the two materials.With the increase in the number of gradient layers,the composition changes continuously along the direction of deposition height,and the microstructure morphology shows a smooth transition from 304 stainless steel to Mo,which is gradually transformed from columnar crystal to dendritic crystal.Elements Fe,Mo,and other major elements transform linearly along the gradient direction,with sufficient interlayer diffusion between the deposited layers,leading to good metallurgical bonding.The smaller the change in composition gradient,the greater the microhardness value along the deposition direction.When the composition gradient is 10%,the gradient layer exhibits higher hardness(940 HV)and excellent resistance to surface abrasion,and the overall compressive properties of the samples are better,with the compressive fracture stress in the top region reaching 750.05±14 MPa.展开更多
Current modifications of Ti-based materials with porous scaffolds for achieving biological fixation often decrease corrosion fatigue strength(σ_(cf))of the resultant implants,thereby shortening their service lifes-pa...Current modifications of Ti-based materials with porous scaffolds for achieving biological fixation often decrease corrosion fatigue strength(σ_(cf))of the resultant implants,thereby shortening their service lifes-pan.To resolve this issue,in the present,a step-wise graded porous Ti-6Al-7Nb scaffold was additively manufactured on optimally surface mechanical attrition treated(SMATed)Ti-6Al-7Nb(specifically de-noted as S-Ti6Al7Nb)using laser powder bed fusion(PBF)technology.The microstructure,bond strength,residual stress distribution,and corrosion fatigue behavior of porous scaffolds modified S-Ti6Al7Nb were investigated and compared with those of mechanically polished Ti-6Al-7Nb(P-Ti6Al7Nb),S-Ti6Al7Nb,and porous scaffolds modified P-Ti6Al7Nb.Results showed that corrosion fatigue of porous scaffolds modi-fied Ti-6Al-7Nb was propagation controlled.Moreover,the crack propagation behavior in the PBF scaf-fold’s fusion zone(FZ)and heat-affected zone(HAZ),exhibiting insensitivity to the microstructural con-figurations characterized by columnar prior-βgrain(PBG)boundaries and acicularα''martensites,cou-pled with the PBF-induced residual tensile stresses in these regions,resulted in a considerable decrease inσ_(cf) for porous scaffolds modified P-Ti6Al7Nb compared to P-Ti6Al7Nb.In contrast,step-wise graded porous scaffold-modified S-Ti6Al7Nb demonstrated an improvedσ_(cf) which was even higher than that of P-Ti6Al7Nb.Such an advancement in corrosion fatigue strength is primarily attributed to the presence of residual compressive stresses within the underlying S-Ti6Al7Nb substrate,extending beyond FZ and HAZ.These stresses increased the crack propagation threshold,leading to crack deflection/branching and increased crack-path tortuosity,thereby synergistically markedly enhancing the crack propagation resis-tance of porous scaffolds modified S-Ti6Al7Nb.展开更多
Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and th...Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design path.The parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/s.The results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.展开更多
SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+...SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.展开更多
This review explores multi-directional functionally graded(MDFG)nanostructures,focusing on their material characteristics,modeling approaches,and mechanical behavior.It starts by classifying different types of functio...This review explores multi-directional functionally graded(MDFG)nanostructures,focusing on their material characteristics,modeling approaches,and mechanical behavior.It starts by classifying different types of functionally graded(FG)materials such as conventional,axial,bi-directional,and tri-directional,and the material distribution models like power-law,exponential,trigonometric,polynomial functions,etc.It also discusses the application of advanced size-dependent theories like Eringen’s nonlocal elasticity,nonlocal strain gradient,modified couple stress,and consistent couple stress theories,which are essential to predict the behavior of structures at small scales.The review covers the mechanical analysis of MDFG nanostructures in nanobeams,nanopipes,nanoplates,and nanoshells and their dynamic and static responses under different loading conditions.The effect of multi-directional material gradation on stiffness,stability and vibration is discussed.Moreover,the review highlights the need for more advanced analytical,semi-analytical,and numerical methods to solve the complex vibration problems ofMDFG nanostructures.It is evident that the continued development of these methods is crucial for the design,optimization,and real-world application of MDFG nanostructures in advanced engineering fields like aerospace,biomedicine,and micro/nanoelectromechanical systems(MEMS/NEMS).This study is a reference for researchers and engineers working in the domain of MDFG nanostructures.展开更多
Structural mapping is an important method for studying algebraic structures.Hom-algebra and monoidal Hom-group are new structures produced by algebra and group structural mappings,respectively.These structures are imp...Structural mapping is an important method for studying algebraic structures.Hom-algebra and monoidal Hom-group are new structures produced by algebra and group structural mappings,respectively.These structures are important algebra and group generalizations and are closely related to them.Let(A,β)be a Hom-algebra and(G,α)a monoidal Hom-group.A structure of(A,β)graded by(G,α)is introduced;this structure is called Hom-group graded algebra.This study presents the definition of Hom group graded algebra,provides some examples,and dis-cusses its basic properties.Furthermore,a sufficient and necessary condition that makes(A,β)a strongly(G,α)-graded algebra is explored using a structure mapβand unit 1A.Finally,by using different maps,two sufficient and necessary conditions for a Hom-algebra to be a(G,α)-graded algebra are expressed in different ways.展开更多
Mechanical loading constitutes a fundamental determinant in the process of bone remodeling.This modeling encompasses the incorporation of mechanical stimuli,the involvement of cellular and molecular constituents,as we...Mechanical loading constitutes a fundamental determinant in the process of bone remodeling.This modeling encompasses the incorporation of mechanical stimuli,the involvement of cellular and molecular constituents,as well as the utilization of sophisticated computational methodologies.Such an approach is imperative for forecasting bone behaviour across varying environmental conditions.In the present study,key findings from bone mechanobiology are reviewed,along with the possibility that Functionally Graded Materials(FGM)enhances osseointegration and lowers the stress-shielding effect during bone remodeling and compared to titanium,FGM improves periprosthetic bone remodeling.To summarise some of the most important findings from computational models of bone mechanobiology,explaining how modifications to the mechanical environment affect implant design,growth of bone,and bone response.The impact that changes related to the mechanical environment have on bone response is examined using computational models and methods such as surface microtopography to determine how an implant’s bone density has increased over time.This review focuses on the refinement of advanced simulation frameworks and their synergy with imaging technologies to strengthen model validation,ultimately resulting in better clinical outcomes in the context of bone health treatments.展开更多
The utilization of graded Al powders offers the possibility to adjust the combustion performance of Al powders,while simultaneously safeguarding their energy properties.In this paper,a series of graded Al powder have ...The utilization of graded Al powders offers the possibility to adjust the combustion performance of Al powders,while simultaneously safeguarding their energy properties.In this paper,a series of graded Al powder have been incorporated into the typical Al@AP composites through the spray drying technique.The thermal behavior,ignition and combustion characteristics were comprehensively evaluated and compared.The experimental results showed that with the varying inclusion of the graded Al,the heat of reaction exhibited a significant change,ranging from 9090 J·g^(-1) to 11036 J·g^(-1),which was strongly dependent on the particle size of Al.The combination of Al with diverse range of particle sizes in graded configuration serves to significantly enhance the decomposition of AP,resulting in the disappearance of the LTD stage and a conspicuous decrease of at least 11.7℃ in the peak temperature of the HTD.Furthermore,the maximum burning rate achieved by the Al-3@AP composite was 33.6 mm·s^(-1),which was exactly twice as high as that of the graded Al-1@AP composite with the lowest burning rate.Diffraction peaks corresponding to unburned Al were detected in the condensed combustion products of Al-1@AP,and the combustion images clearly indicated an incomplete combustion tendency for this sample.In contrast,a well-designed gradation of Al powders,such as a combination of fine Al powders with a particle size below 5μm,has proven to be the most conducive to enhancing the combustion efficiency of the composites.展开更多
A novel elastic metamaterial is proposed with the aim of achieving lowfrequency broad bandgaps and bandgap regulation.The band structure of the proposed metamaterial is calculated based on the Floquet-Bloch theorem,an...A novel elastic metamaterial is proposed with the aim of achieving lowfrequency broad bandgaps and bandgap regulation.The band structure of the proposed metamaterial is calculated based on the Floquet-Bloch theorem,and the boundary modes of each bandgap are analyzed to understand the effects of each component of the unit cell on the bandgap formation.It is found that the metamaterials with a low elastic modulus of ligaments can generate flexural wave bandgaps below 300 Hz.Multi-frequency vibrations can be suppressed through the selective manipulation of bandgaps.The dual-graded design of metamaterials that can significantly improve the bandgap width is proposed based on parametric studies.A new way that can regulate the bandgap is revealed by studying the graded elastic modulus in the substrate.The results demonstrate that the nonlinear gradient of the elastic modulus in the substrate offers better bandgap performance.Based on these analyses,the proposed elastic metamaterials can pave the way for multi-frequency vibration control,low-frequency bandgap broadening,and bandgap tuning.展开更多
Aluminum alloys are widely used in industry due to their light weight.These alloys are generally exposed to abrasive wear,which diminishes their effective lifespan.The wear resistance of these alloys is enhanced by ad...Aluminum alloys are widely used in industry due to their light weight.These alloys are generally exposed to abrasive wear,which diminishes their effective lifespan.The wear resistance of these alloys is enhanced by adding various reinforcements,however,this enhancement comes at the cost of reduced fracture toughness.This paradox of increased wear resistance versus decreased fracture toughness in aluminum alloys can be resolved by using functionally graded materials (FGMs).This study focuses on the abrasive wear behavior of functional graded aluminum matrix composites reinforced with Al_(3)Ti particles.The wear properties of the composites were investigated by considering the characteristics of the composite such as matrix type and various composite zones,as well as the wear parameters such as abrasive particle diameter,load,sliding speed and distance.Taguchi method was used in the abrasive wear tests in order to get more reliable results in a timeefficient manner.Experiment recipes were created based on the L_(27)(3^(6)) orthogonal series.As a result of the study,it is observed that the wear resistance of the composites increases with an increase in Al_(3)Ti reinforcement content and hardness of the matrix.In addition,the size of abrasive particles and the applied load are significant factors affecting abrasive wear.展开更多
基金financially supported and funded by the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University(IMSIU)(No.IMSIU-DDRSP2503)。
文摘Functionally graded cellular structures(FGCSs)have a multitude of applications to a wide range of industries.Utilising the ever-progressing technology of additive manufacturing(AM),FGCSs can be applied to control material grading and achieve the desired mechanical properties.The current study explores the design and optimisation of FGCSs for AM,with a focus on improving the compression and impact performance of below knee(BK)prosthetic limbs made of thermoplastic polyurethane(TPU).A multiscale research methodology integrating topology optimization(TO),finite element analysis(FEA),and design of experiments(Do E)was adopted to optimise lattice structures in terms of stiffness and lightweight properties.Two-unit cell designs were considered in the study:Schwarz P gyroid and body-centered cubic(BCC).Response surface methodology(RSM)was implemented to analyse the effect of minimum and maximum cell wall thickness,cell size,and unit cell type on the mechanical performance of TPU FGCS structures.The results indicated that a Schwarz P FGCS structure with cell size,minimum and maximum cell wall thickness of 6,0.9 and 2.8 mm,respectively,could be optimal for a compromise between performance and weight.In this optimized case,stiffness and volume fraction values of 684 N/mm and 0.64 were obtained,respectively.The study also presents a proof-of-concept design for a BK prosthetic damper,highlighting the potential of FGCSs to enhance patient comfort,reduce manufacturing costs,and enable personalised designs through 3D scanning and AM.The obtained results could be a step forward towards the incorporation of AM technologies in prosthetics,offering a pathway to lightweight,cost-effective,and functionally tailored solutions.
基金Project supported by the Natural Science Foundation of Shandong Province of China(No.ZR2024MA085)the Fundamental Research Funds for Central Universities of China(No.27RA2515008)。
文摘When micro/nano-scale gradient coatings are subject to large thermal gradients or high heat fluxes,the spatial size effect cannot be ignored.It is important to understand how the size effect influences the thermal fracture behavior of functionally graded coating/substrate structures.This study aims at analyzing the transient thermal fracture behavior of collinear interface cracks in functionally graded coating/substrate structures based on the nonlocal dual-phase-lag heat conduction model.By means of integral transform techniques,the mixed boundary problem is transformed into a set of singular integral equations,which are solved by the Chebyshev polynomials.The effects of the nonlocal parameter,coating thickness,crack spacing,and non-homogeneous parameters on the temperature and stress intensity factors(SIFs)are examined.The numerical results show that these parameters play an essential role in controlling the thermal fracture behavior of the structures,especially at micro/nano-scales.
基金Funded by the Guangdong Major Project of Basic and Applied Basic Research(No.2021B0301030001)the Foundation of National Key Laboratory of Shock Wave and Detonation Physics(No.JCKYS2022212004)。
文摘We used hydrodynamic simulations and shock wave propagation theories to analyze the behavior of shock waves within Ti/Pt periodically modulated graded structures and their integration layers.The effects of the total number of periodic layers,the total thickness of graded materials and loading velocity on the integration layer thickness and behavior of pressure-strain rate were systematically investigated.The results reveal that,by adjusting the total number of periodically modulated layers,the total thickness of graded materials and loading velocity the pressure amplitudes of the reflected compressive and rarefaction waves at different interfaces of Ti/Pt periodically modulated graded materials can be precisely controlled.Furthermore,empirical structural design criteria for Ti/Pt periodically modulated graded materials are established.The thickness ratio variation between adjacent Ti/Pt layers in the periodic structure must exceed 0.32.After the collaborative design of the integration layer,Ti/Pt periodically modulated graded materials can achieve a controllable loading function with pressures ranging from 1.4 to 144 GPa and strain rates from 3.8×10^(4) to 1.7×10^(7) s^(–1).The outcomes of this research provide a theoretical and simulation basis for the optimized design of periodically modulated graded materials to be utilized in ramp compression experiments.
基金supported by Beijing Natural Science Foundation(L233025)。
文摘Functionally graded material(FGM)plates are widely used in various engineering structures owing to their tailor-made mechanical properties,whereas cracked homogeneous plates constitute a canonical setting in fracture mechanics analysis.These two classes of problems respectively embody material non-uniformity and geometric discontinuity,thereby imposing more stringent requirements on numerical methods in terms of high-order field continuity and accurate defect representation.Based on the classical Kirchhoff-Love plate theory,a numerical manifold method(MLS-NMM)incorporating moving least squares(MLS)interpolation is developed for bending analysis of FGM plates and fracture simulation of homogeneous plates with defects.The method constructs an H^(2)-regular approximation with high-order continuous weighting functions and,combined with the separation of mathematical and physical covers,establishes a unified framework that accurately handles material gradients and cracks without mesh reconstruction.For the crack tip,a singular physical cover incorporating the Williams asymptotic field is introduced to achieve local enrichment,enabling the natural capture of displacement discontinuity and stress singularity.Stress intensity factors are extracted using the interaction integral method,and the dimensionless J-integral shows a maximum relative error below 1.2%compared with the reference solution.Numerical results indicate that MLS-NMM exhibits excellent convergence performance:using 676 mathematical nodes,the nondimensional central deflection of both FGM and homogeneous plates agrees with reference solutions with a maximum relative error below 0.81%,and no shear locking occurs.A systematic analysis reveals that for a simply supported on all four edges(SSSS)FGM square plate with a/h=10,the nondimensional central deflection increases by 212%as the gradient index nrises from 0 to 5.For a homogeneous plate containing a central crack with c/a=0.6,the nondimensional central deflection increases by approximately 46%compared with the intact plate.Under weak boundary constraints(e.g.,SFSF),the deformation is markedly amplified,with the deflection reaching more than three times that under strong constraints(SCSC).The proposed method provides an efficient,reconstruction-free numerical tool for high-accuracy bending and fracture analyses of FGM and cracked thin-plate structures.
文摘Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properties.The integration of FG materials with auxetic structures enhances their adaptability in advanced engineering applications.However,understanding their dynamic behavior under external excitations is essential for optimal design and structural reliability.Nonlinear interactions in such structures pose significant challenges in vibration analysis,necessitating robust analytical methods.This study presents a closed-form solution for the nonlinear forced vibration analysis of sandwich FG auxetic beams,offering an accurate and efficient method for predicting their dynamic response.The beam consists of two FG face sheets with material properties varying through the thickness and a re-entrant honeycomb auxetic core with an adjustable Poisson's ratio.The governing nonlinear equations of motion are derived using the first-order shear deformation theory(FSDT),the modified Gibson model,and the von Kármán relations,formulated through Hamilton's principle.A closed-form solution is obtained via the Galerkin method and multiple-scale technique.The results demonstrate that FG layers enable control of the overweight and dynamic response amplitude,with positive power law indexes reducing weight.Comparisons with finite element results confirm the accuracy of the proposed formulation.
文摘The accurate mechanical analysis of thick-walled pressure vessel structures composed of advanced materials,such as hyperelastic and functionally graded materials(FGMs),is critical for ensuring their safety and optimizing their design.However,conventional numerical methods can face challenges with the non-linearities inherent in hyperelasticity and the complex spatial variations in FGMs.This paper presents a novel hybrid numerical approach combining Physics-Informed Neural Networks(PINNs)with Finite Element Method(FEM)derived data for the robust analysis of thick-walled,axisymmetric,heterogeneous,hyperelastic pressure vessels with elliptical geometries.A PINN framework incorporating neo-Hookean constitutive relations is developed in MATLAB.To enhance training efficiency and accuracy,the PINN’s loss function is augmented with displacement data obtained from high-fidelity FEM simulations performed in ANSYS.The methodology is rigorously validated by comparing PINN-predicted displacement and von Mises stress fields against ANSYS benchmarks for various scenarios of FGMconfigurations(with material properties varying according to a power law)subjected to internal and external pressurization.The results demonstrate excellent agreement between the proposed hybrid PINN-FEMapproach and conventional FEMsolutions across all test cases,accurately capturing complex deformation patterns and stress concentrations.This study highlights the potential of data-augmented PINNs as an effective and accurate computational tool for tackling complex solid mechanics problems involving non-linearmaterials and significant heterogeneity,offering a promising avenue for future research in engineering design and analysis.
基金financially supported by the National Key Research and Development Program of China(No.2021YFB3701800)Special funding support for the Yuelu Mountain National University Science and Technology City“Ranking the Top of the List”Research Project:(Tunnel Boring Machine High-performance Long-life Cutting Tools)the State Key Laboratory of Powder Metallurgy,Central South University,Changsha,China.
文摘The good combination of mechanical and wear properties for cemented carbides is crucial.In this work,the wear behavior of functionally graded cemented carbide(FGCC)and non-graded cemented carbide(CC),with CoNiFeCr multi-principal-element alloy(MPEA)binder,has been investigated by performing sliding wear tests and composition characterization.The results showed that compared with CC,FGCC had higher hardness,stronger fracture toughness,better wear performance,and similar TRS.FGCCs exhibited lower wear rates(3.44×10^(−7)–6.95×10^(−6)mm^(3)/(N m))and coefficients of friction(COFs)(0.27–0.39)than CCs from RT to 600℃due to mitigation of multiple risks caused by binder removal,fragmentation and pull-out of WC grains,high-temperature oxidation and softening.In the low-temperature wear stage,the MPEA binder underwent dynamic recrystallization(DRX)and twinning deformation before removing from the surface.The binder removal caused dislocation pile-ups and stacking faults(SFs)to form under high stress,resulting in fragmentation and pull-out of WC grains.The low-temperature wear was dominated by abrasive wear and adhesive wear,with a low wear rate and a high and unstable COF.In the high-temperature wear stage,initial pitting oxidation of WC grains generated many subgrain boundaries,reducing heat transfer and exacerbating oxidation,resulting in an oxide layer enriched with WO3,Mx Oy,and MWO4.High-temperature wear was dominated by oxidation wear and high-temperature softening,with a high wear rate and a low and smooth COF.The results from the present study do not only provide theoretical guidance for an understanding of the antiwear mechanism of WC-CoNiFeCr,but also a new approach for the preparation of cemented carbides with high wear resistance.
基金financially supported by National Natural Science Foundation of China(No.52304136)Young Talent of Lifting Engineering for Science and Technology in Shandong,China(No.SDAST2024QTA060)Key Project of Research and Development in Liaocheng(No.2023YD02)。
文摘It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and electromagnetic radiation(EMR),uniaxial hierarchical cyclic loading and unloading tests were carried out on sandstones with different fracture numbers under dry,natural and saturated water content,to explore the fracture propagation,failure precursor characteristics and damage response mechanism under the influence of water content effect.The results show that with the increase of water content,the peak stress and crack initiation stress decrease gradually,and the decreases are 15.28%-21.11%and 17.64%-23.04%,respectively.The peak strain and crack initiation strain increase gradually,and the increases are 19.85%-44.53%and 19.15%-41.94%,respectively.The precracked rock with different water content is mainly characterized by tensile failure at different loading stages.However,with the increase of water content,the proportion of shear cracks gradually increases,while acoustic emission events gradually decrease,the dissipative energy and energy storage limits of the rock under peak load gradually decrease,and the charge signal increases significantly,which is because the lubrication effect of water reduces the friction coefficient between crack surfaces.
基金supported by the Guangdong Major Project of Basic and Applied Basic Research(Grant No.2021B0301030001)the National Key Research and Development Program of China(Grant No.2021YFB3802300)the Foundation of National Key Laboratory of Shock Wave and Detonation Physics(Grant No.JCKYS2022212004)。
文摘The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to achieving controllable stress-strain rate loading.In this study,we have,for the first time,combined one-dimensional fluid computational software with machine learning methods.We first elucidated the mechanisms by which GDI structures control stress and strain rates.Subsequently,we constructed a machine learning model to create a structure-property response surface.The results show that altering the loading velocity and interlayer thickness has a pronounced regulatory effect on stress and strain rates.In contrast,the impedance distribution index and target thickness have less significant effects on stress regulation,although there is a matching relationship between target thickness and interlayer thickness.Compared with traditional design methods,the machine learning approach offers a10^(4)—10^(5)times increase in efficiency and the potential to achieve a global optimum,holding promise for guiding the design of GDI.
文摘BACKGROUND Endoscopic submucosal dissection(ESD)has become a widely accepted,minimally invasive treatment for gastrointestinal submucosal tumors.It has been reported that humanistic nursing care with graded psychological interventions can effectively enhance patients’physical activity in patients,reduce postoperative complications,and improve their postoperative quality of life.AIM To investigate the effects of combining humanistic care with graded psychological support on nursing satisfaction and quality of life in patients undergoing ESD for gastrointestinal submucosal tumors.METHODS A retrospective analysis was conducted on the clinical data of 180 patients who underwent ESD surgery for gastrointestinal submucosal tumors at our hospital between March 2021 and February 2023.Patients were allocated into groups based on the nursing care they received:The control group,which received routine care(n=90),and the observation group,which was subjected to humanistic nursing care in combination with graded psychological support(n=90).Patient anxiety and depression were assessed using the self-rating anxiety scale(SAS)and self-rating depression scale(SDS).Quality of life was evaluated using the shortform 36 health survey,and additional indications such as time to first food intake,surgery duration,length of hospital stay,nursing satisfaction,and adverse reactions were also recorded.Data was analyzed using SPSS22.0,with t-tests employed for continuous variables andχ2 tests for categorical data.RESULTS Patients in the observation group experienced significantly shorter times to first postoperative meal,surgery,and hospital stay compared to the control group.After the intervention,the SAS score of the observation group was 43.17±5.68,and the SDS score was 41.57±6.52,both significantly lower than those of the control group,with SAS score of 52.38±5.21 and SDS score of 51.23±8.25.In addition,the observation group scored significantly higher in daily living,physical function,psychological well-being,and social functioning(80.01±6.39,83.59±6.89,81.69±5.34,and 85.23±6.05,respectively).Moreover,the observation group also exhibited higher satisfaction and selfefficacy scores and a lower incidence of adverse reactions compared to the control group(P<0.05).CONCLUSION For patients undergoing ESD for gastrointestinal submucosal tumors,humanistic nursing care in combination with graded psychological nursing care significantly shorten the times to first postoperative meal,surgery,and hospital stay,effectively alleviates anxiety and depression,improves quality of life and nursing satisfaction,and mitigate the incidence of adverse reactions.
基金National Natural Science Foundation of China(51975286)。
文摘Fe-Mo functionally graded materials(FGMs)with different composition-change rates from 100%304 stainless steel to 100%Mo along the composition gradient direction were prepared by electron beam-directed energy deposition(EB-DED)technique,including three samples with composition mutation of 100%,composition change rate of 10%and 30%.Results show that the composition-change rate significantly affects the microstructure and mechanical properties of the samples.In the sample with abrupt change of composition,the sharp shift in composition between 304 stainless steel and Mo leads to a great difference in the microstructure and hardness near the interface between the two materials.With the increase in the number of gradient layers,the composition changes continuously along the direction of deposition height,and the microstructure morphology shows a smooth transition from 304 stainless steel to Mo,which is gradually transformed from columnar crystal to dendritic crystal.Elements Fe,Mo,and other major elements transform linearly along the gradient direction,with sufficient interlayer diffusion between the deposited layers,leading to good metallurgical bonding.The smaller the change in composition gradient,the greater the microhardness value along the deposition direction.When the composition gradient is 10%,the gradient layer exhibits higher hardness(940 HV)and excellent resistance to surface abrasion,and the overall compressive properties of the samples are better,with the compressive fracture stress in the top region reaching 750.05±14 MPa.
基金the National Key Research and Development Program of China(Grant No.2023YFC2412600)the National Natural Science Foundation of China(Grant No.51971171)for financially supporting this work.
文摘Current modifications of Ti-based materials with porous scaffolds for achieving biological fixation often decrease corrosion fatigue strength(σ_(cf))of the resultant implants,thereby shortening their service lifes-pan.To resolve this issue,in the present,a step-wise graded porous Ti-6Al-7Nb scaffold was additively manufactured on optimally surface mechanical attrition treated(SMATed)Ti-6Al-7Nb(specifically de-noted as S-Ti6Al7Nb)using laser powder bed fusion(PBF)technology.The microstructure,bond strength,residual stress distribution,and corrosion fatigue behavior of porous scaffolds modified S-Ti6Al7Nb were investigated and compared with those of mechanically polished Ti-6Al-7Nb(P-Ti6Al7Nb),S-Ti6Al7Nb,and porous scaffolds modified P-Ti6Al7Nb.Results showed that corrosion fatigue of porous scaffolds modi-fied Ti-6Al-7Nb was propagation controlled.Moreover,the crack propagation behavior in the PBF scaf-fold’s fusion zone(FZ)and heat-affected zone(HAZ),exhibiting insensitivity to the microstructural con-figurations characterized by columnar prior-βgrain(PBG)boundaries and acicularα''martensites,cou-pled with the PBF-induced residual tensile stresses in these regions,resulted in a considerable decrease inσ_(cf) for porous scaffolds modified P-Ti6Al7Nb compared to P-Ti6Al7Nb.In contrast,step-wise graded porous scaffold-modified S-Ti6Al7Nb demonstrated an improvedσ_(cf) which was even higher than that of P-Ti6Al7Nb.Such an advancement in corrosion fatigue strength is primarily attributed to the presence of residual compressive stresses within the underlying S-Ti6Al7Nb substrate,extending beyond FZ and HAZ.These stresses increased the crack propagation threshold,leading to crack deflection/branching and increased crack-path tortuosity,thereby synergistically markedly enhancing the crack propagation resis-tance of porous scaffolds modified S-Ti6Al7Nb.
基金Natural Science Foundation of Hubei Province(2024AFB432)National Natural Science Foundation of China(52171045,12302436,52302095)Research Fund of Jianghan University(2023JCYJ05)。
文摘Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design path.The parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/s.The results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.
文摘SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.
文摘This review explores multi-directional functionally graded(MDFG)nanostructures,focusing on their material characteristics,modeling approaches,and mechanical behavior.It starts by classifying different types of functionally graded(FG)materials such as conventional,axial,bi-directional,and tri-directional,and the material distribution models like power-law,exponential,trigonometric,polynomial functions,etc.It also discusses the application of advanced size-dependent theories like Eringen’s nonlocal elasticity,nonlocal strain gradient,modified couple stress,and consistent couple stress theories,which are essential to predict the behavior of structures at small scales.The review covers the mechanical analysis of MDFG nanostructures in nanobeams,nanopipes,nanoplates,and nanoshells and their dynamic and static responses under different loading conditions.The effect of multi-directional material gradation on stiffness,stability and vibration is discussed.Moreover,the review highlights the need for more advanced analytical,semi-analytical,and numerical methods to solve the complex vibration problems ofMDFG nanostructures.It is evident that the continued development of these methods is crucial for the design,optimization,and real-world application of MDFG nanostructures in advanced engineering fields like aerospace,biomedicine,and micro/nanoelectromechanical systems(MEMS/NEMS).This study is a reference for researchers and engineers working in the domain of MDFG nanostructures.
基金The National Natural Science Foundation of China (No. 12271089, 12471033)。
文摘Structural mapping is an important method for studying algebraic structures.Hom-algebra and monoidal Hom-group are new structures produced by algebra and group structural mappings,respectively.These structures are important algebra and group generalizations and are closely related to them.Let(A,β)be a Hom-algebra and(G,α)a monoidal Hom-group.A structure of(A,β)graded by(G,α)is introduced;this structure is called Hom-group graded algebra.This study presents the definition of Hom group graded algebra,provides some examples,and dis-cusses its basic properties.Furthermore,a sufficient and necessary condition that makes(A,β)a strongly(G,α)-graded algebra is explored using a structure mapβand unit 1A.Finally,by using different maps,two sufficient and necessary conditions for a Hom-algebra to be a(G,α)-graded algebra are expressed in different ways.
文摘Mechanical loading constitutes a fundamental determinant in the process of bone remodeling.This modeling encompasses the incorporation of mechanical stimuli,the involvement of cellular and molecular constituents,as well as the utilization of sophisticated computational methodologies.Such an approach is imperative for forecasting bone behaviour across varying environmental conditions.In the present study,key findings from bone mechanobiology are reviewed,along with the possibility that Functionally Graded Materials(FGM)enhances osseointegration and lowers the stress-shielding effect during bone remodeling and compared to titanium,FGM improves periprosthetic bone remodeling.To summarise some of the most important findings from computational models of bone mechanobiology,explaining how modifications to the mechanical environment affect implant design,growth of bone,and bone response.The impact that changes related to the mechanical environment have on bone response is examined using computational models and methods such as surface microtopography to determine how an implant’s bone density has increased over time.This review focuses on the refinement of advanced simulation frameworks and their synergy with imaging technologies to strengthen model validation,ultimately resulting in better clinical outcomes in the context of bone health treatments.
文摘The utilization of graded Al powders offers the possibility to adjust the combustion performance of Al powders,while simultaneously safeguarding their energy properties.In this paper,a series of graded Al powder have been incorporated into the typical Al@AP composites through the spray drying technique.The thermal behavior,ignition and combustion characteristics were comprehensively evaluated and compared.The experimental results showed that with the varying inclusion of the graded Al,the heat of reaction exhibited a significant change,ranging from 9090 J·g^(-1) to 11036 J·g^(-1),which was strongly dependent on the particle size of Al.The combination of Al with diverse range of particle sizes in graded configuration serves to significantly enhance the decomposition of AP,resulting in the disappearance of the LTD stage and a conspicuous decrease of at least 11.7℃ in the peak temperature of the HTD.Furthermore,the maximum burning rate achieved by the Al-3@AP composite was 33.6 mm·s^(-1),which was exactly twice as high as that of the graded Al-1@AP composite with the lowest burning rate.Diffraction peaks corresponding to unburned Al were detected in the condensed combustion products of Al-1@AP,and the combustion images clearly indicated an incomplete combustion tendency for this sample.In contrast,a well-designed gradation of Al powders,such as a combination of fine Al powders with a particle size below 5μm,has proven to be the most conducive to enhancing the combustion efficiency of the composites.
基金Project supported by the National Natural Science Foundation of China(Nos.11872233,U2341231,and 12102245)。
文摘A novel elastic metamaterial is proposed with the aim of achieving lowfrequency broad bandgaps and bandgap regulation.The band structure of the proposed metamaterial is calculated based on the Floquet-Bloch theorem,and the boundary modes of each bandgap are analyzed to understand the effects of each component of the unit cell on the bandgap formation.It is found that the metamaterials with a low elastic modulus of ligaments can generate flexural wave bandgaps below 300 Hz.Multi-frequency vibrations can be suppressed through the selective manipulation of bandgaps.The dual-graded design of metamaterials that can significantly improve the bandgap width is proposed based on parametric studies.A new way that can regulate the bandgap is revealed by studying the graded elastic modulus in the substrate.The results demonstrate that the nonlinear gradient of the elastic modulus in the substrate offers better bandgap performance.Based on these analyses,the proposed elastic metamaterials can pave the way for multi-frequency vibration control,low-frequency bandgap broadening,and bandgap tuning.
基金financially supported by the Scientific Research Project Coordinatorship (BAP) of Yildiz Technical University (YTU) (Project No: FYL-2021-3825)。
文摘Aluminum alloys are widely used in industry due to their light weight.These alloys are generally exposed to abrasive wear,which diminishes their effective lifespan.The wear resistance of these alloys is enhanced by adding various reinforcements,however,this enhancement comes at the cost of reduced fracture toughness.This paradox of increased wear resistance versus decreased fracture toughness in aluminum alloys can be resolved by using functionally graded materials (FGMs).This study focuses on the abrasive wear behavior of functional graded aluminum matrix composites reinforced with Al_(3)Ti particles.The wear properties of the composites were investigated by considering the characteristics of the composite such as matrix type and various composite zones,as well as the wear parameters such as abrasive particle diameter,load,sliding speed and distance.Taguchi method was used in the abrasive wear tests in order to get more reliable results in a timeefficient manner.Experiment recipes were created based on the L_(27)(3^(6)) orthogonal series.As a result of the study,it is observed that the wear resistance of the composites increases with an increase in Al_(3)Ti reinforcement content and hardness of the matrix.In addition,the size of abrasive particles and the applied load are significant factors affecting abrasive wear.
