Coupled thermo-mechanical analysis of two bonded functionally graded materials subjected to thermal loads is conducted in this study with the graded finite element method. The thermal-mechanical properties of the bi-m...Coupled thermo-mechanical analysis of two bonded functionally graded materials subjected to thermal loads is conducted in this study with the graded finite element method. The thermal-mechanical properties of the bi-material interfaces are classified based on discontinuity degrees of their material properties and their derivatives at the interfaces. Numerical results indicate that discontinuity exerts remarkable effect on the temperature profile and stress value at the interface of two bonded functionally-graded materials. Under the thermal flux loading conditions, the stronger the interface discontinuity is, the smaller the heat flux is.展开更多
The finite element method (FEM) and the boundary element method (BEM) are often adopted. However, they are not convenient to spatially vary thermal properties of functionally graded material (FGM). Therefore, the meth...The finite element method (FEM) and the boundary element method (BEM) are often adopted. However, they are not convenient to spatially vary thermal properties of functionally graded material (FGM). Therefore, the method of lines (MOL) is introduced to solve the temperature field of FGM. The basic idea of the method is to semi-discretize the governing equation into a system of ordinary differential equations (ODEs) defined on discrete lines by means of the finite difference method. The temperature field of FGM can be obtained by solving the ODEs. The functions of thermal properties are directly embodied in these equations and these properties are not discretized in the domain. Thus, difficulty of FEM and BEM is overcome by the method. As a numerical example, the temperature field of a plane problem is analyzed for FGMs through varying thermal conductivity coefficient by the MOL.展开更多
An efficient approach was introduced for improving the condition of major controlled rolling process pa- rameters of roughing, finishing and coiling temperatures and optimizing these parameters to obtain minimum grain...An efficient approach was introduced for improving the condition of major controlled rolling process pa- rameters of roughing, finishing and coiling temperatures and optimizing these parameters to obtain minimum grain size and maximum dome height simultaneously. Taguchi method combined with grey relational analysis was applied to achieve optimum grain size and dome height during controlled rolling process. For this purpose, four levels for the above temperatures were chosen and sixteen experiments were conducted based on orthogonal array of Taguchi meth- od. Based on Taguchi approach, signal-to-noise （S/N） ratios were calculated and used in order to obtain the opti- mum levels for every input parameter. Analysis of variance revealed that finishing and coiling temperatures have the maximum effect on the grain size and dome height of microalloyed steels. The confirmation tests with the optimal levels of parameters indicated that the grain size and dome height of controlled rolled microalloyed steels can be im- proved effectively through this approach.展开更多
Recently application of functionally graded materials（FGMs） have attracted a great deal of interest. These materials are composed of various materials with different micro-structures which can vary spatially in FGMs...Recently application of functionally graded materials（FGMs） have attracted a great deal of interest. These materials are composed of various materials with different micro-structures which can vary spatially in FGMs. Such composites with varying thickness and non-uniform pressure can be used in the aerospace engineering. Therefore, analysis of such composite is of high importance in engineering problems. Thermoelastic analysis of functionally graded cylinder with variable thickness under non-uniform pressure is considered. First order shear deformation theory and total potential energy approach is applied to obtain the governing equations of non-homogeneous cylinder. Considering the inner and outer solutions, perturbation series are applied to solve the governing equations. Outer solution for out of boundaries and more sensitive variable in inner solution at the boundaries are considered. Combining of inner and outer solution for near and far points from boundaries leads to high accurate displacement field distribution. The main aim of this paper is to show the capability of matched asymptotic solution for different non-homogeneous cylinders with different shapes and different non-uniform pressures. The results can be used to design the optimum thickness of the cylinder and also some properties such as high temperature residence by applying non-homogeneous material.展开更多
Tarq geochemical 1:100,000 Sheet is located in Isfahan province which is investigated by Iran’s Geological and Explorations Organization using stream sediment analyzes. This area has stratigraphy of Precambrian to Qu...Tarq geochemical 1:100,000 Sheet is located in Isfahan province which is investigated by Iran’s Geological and Explorations Organization using stream sediment analyzes. This area has stratigraphy of Precambrian to Quaternary rocks and is located in the Central Iran zone. According to the presence of signs of gold mineralization in this area, it is necessary to identify important mineral areas in this area. Therefore, finding information is necessary about the relationship and monitoring the elements of gold, arsenic, and antimony relative to each other in this area to determine the extent of geochemical halos and to estimate the grade. Therefore, a well-known and useful K-means method is used for monitoring the elements in the present study, this is a clustering method based on minimizing the total Euclidean distances of each sample from the center of the classes which are assigned to them. In this research, the clustering quality function and the utility rate of the sample have been used in the desired cluster (S(i)) to determine the optimum number of clusters. Finally, with regard to the cluster centers and the results, the equations were used to predict the amount of the gold element based on four parameters of arsenic and antimony grade, length and width of sampling points.展开更多
A Coupling Magneto-Electro-Elastic(MEE)Node-based Smoothed Radial Point Interpolation Method(CM-NS-RPIM)was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic(F...A Coupling Magneto-Electro-Elastic(MEE)Node-based Smoothed Radial Point Interpolation Method(CM-NS-RPIM)was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic(FGMEE)structures.By introducing the modified Newmark method,the displacement,electrical potential and magnetic potential of the structures under transient mechanical loading were obtained.Based on G space theory and the weakened weak(W2)formulation,the equations of the multi-physics coupling problems were derived.Using triangular background elements,the free vibration and transient responses of three numerical examples were studied.Results proved that CM-NS-RPIM performed better than the standard FEM by reducing the overly-stiff of structures.Moreover,CM-NS-RPIM could reduce the number of nodes while guaranteeing the accuracy.Besides,triangular elements could be generated automatically even for complex geometries.Therefore,the effectiveness and validity of CM-NS-RPIM were demonstrated,which were valuable for the design of intelligence devices,such as energy harvesters and sensors.展开更多
A differential constraint method is used to obtain analytical solutions of a second-grade fluid flow. By using the first-order differential constraint condition, exact solutions of Poiseuille flows, jet flows and Coue...A differential constraint method is used to obtain analytical solutions of a second-grade fluid flow. By using the first-order differential constraint condition, exact solutions of Poiseuille flows, jet flows and Couette flows subjected to suction or blowing forces, and planar elongational flows are derived. In addition, two new classes of exact solutions for a second-grade fluid flow are found. The obtained exact solutions show that the non-Newtonian second-grade flow behavior depends not only on the material viscosity but also on the material elasticity. Finally, some boundary value problems are discussed.展开更多
Large deformation of a cantilever axially functionally graded (AFG) beam subject to a tip load is analytically studied using the homotopy analysis method (HAM). It is assumed that its Young’s modulus varies along the...Large deformation of a cantilever axially functionally graded (AFG) beam subject to a tip load is analytically studied using the homotopy analysis method (HAM). It is assumed that its Young’s modulus varies along the longitudinal direction according to a power law. Taking the solution of the corresponding homogeneous beam as the initial guess and obtaining a convergence region by adjusting an auxiliary parameter, the analytical expressions for large deformation of the AFG beam are provided. Results obtained by the HAM are compared with those obtained by the finite element method and those in the previous works to verify its validity. Good agreement is observed. A detailed parametric study is carried out. The results show that the axial material variation can greatly change the deformed configuration, which provides an approach to control and manage the deformation of beams. By tailoring the axial material distribution, a desired deformed configuration can be obtained for a specific load. The analytical solution presented herein can be a helpful tool for this procedure.展开更多
Based on the hybrid numerical method (HNM) combining with a reduced-basis method (RBM), the real-time transient response of a functionally graded material (FGM) plates is obtained. The large eigenvalue problem in wave...Based on the hybrid numerical method (HNM) combining with a reduced-basis method (RBM), the real-time transient response of a functionally graded material (FGM) plates is obtained. The large eigenvalue problem in wavenumber domain has been solved through real-time off-line/on-line calculation. At off-line stage, a reduced-basis space is constructed in sample wavenumbers according to the solved eigenvalue problems. The matrices independent of parameters are projected onto the reduced-basis spaces. At on-line stage, the reduced eigenvalue problems of the arbitrary wavenumbers are built. Subsequently, the responses in wavenumber domain are obtained by the approximated eigen-pairs. Because of the application of RBM, the computational cost of transient displacement analysis of FGM plate is decreased significantly, while the accuracy of the solution and the physics of the structure are still retained. The efficiency and validity of the proposed method are demonstrated through a numerical example.展开更多
Mn3O4was prepared with the chemical bath deposition(CBD) method. A Mn SO4 solution was obtained by the leaching and purifying of low-grade rhodochrosite ore(LGRO), which was used as raw material. The prepa ration proc...Mn3O4was prepared with the chemical bath deposition(CBD) method. A Mn SO4 solution was obtained by the leaching and purifying of low-grade rhodochrosite ore(LGRO), which was used as raw material. The prepa ration procedures were studied and promoted. The result showed that the Mn3O4 with the highest purity and highes specific surface area could be obtained under the following processes. An Mn SO4 solution of 1.0 mol/L was added into a beaker under a flow rate of 30 m L/h. The p H of the reaction solution was adjusted to 10 using NH3 H2 O a80 °C. Then the solids were washed and dried at 200 °C fo2.5 h. The total Mn content(TMC) of Mn3O4 was 72.0 %The ionic distributions was formulated as [Mn2?[Mn2??0.3024Mn30.2937Mn4?h0.37860.0254]2O4. The average crys tallite size of Mn3O4 with a tetragonal hausmannite struc ture was found to be about 35 nm by X-ray diffraction(XRD) analysis. The BET specific surface area of the Mn3O4 measured was 32 m2/g.展开更多
The asymptotic development method is applied to analyze the free vibration of non-uniform axially functionally graded(AFG) beams, of which the governing equations are differential equations with variable coefficients....The asymptotic development method is applied to analyze the free vibration of non-uniform axially functionally graded(AFG) beams, of which the governing equations are differential equations with variable coefficients. By decomposing the variable flexural stiffness and mass per unit length into reference invariant and variant parts, the perturbation theory is introduced to obtain an approximate analytical formula of the natural frequencies of the non-uniform AFG beams with different boundary conditions.Furthermore, assuming polynomial distributions of Young's modulus and the mass density, the numerical results of the AFG beams with various taper ratios are obtained and compared with the published literature results. The discussion results illustrate that the proposed method yields an effective estimate of the first three order natural frequencies for the AFG tapered beams. However, the errors increase with the increase in the mode orders especially for the cases with variable heights. In brief, the asymptotic development method is verified to be simple and efficient to analytically study the free vibration of non-uniform AFG beams, and it could be used to analyze any tapered beams with an arbitrary varying cross width.展开更多
In this paper, the kind of remanent small molecules in unsaturated polyester res(?) (UP resin) , the best extractant and the best suitalbe extractive time for measuring the content of these small molecules were studie...In this paper, the kind of remanent small molecules in unsaturated polyester res(?) (UP resin) , the best extractant and the best suitalbe extractive time for measuring the content of these small molecules were studied using ultraviolet- visible spectrophotometry ( UV-VIS method). According to the principle of additivity lightness absorption for mixid solution, the contents of samll molecules in several kinds of cured UP resin were measured. It is pointed out that the UV-VIS method in the assay quality of food grade GRP products is more suitable to China.展开更多
In this paper, a non-Newtonian third-grade blood in coronary and femoral arteries is simulated analytically and numerically. The blood is considered as the third- grade non-Newtonian fluid under the periodic body acce...In this paper, a non-Newtonian third-grade blood in coronary and femoral arteries is simulated analytically and numerically. The blood is considered as the third- grade non-Newtonian fluid under the periodic body acceleration motion and the pulsatile pressure gradient. The hybrid multi-step differential transformation method （Hybrid-Ms- DTM） and the Crank-Nicholson method （CNM） are used to solve the partial differential equation （PDE）, and a good agreement between them is observed in the results. The effects of the some physical parameters such as the amplitude, the lead angle, and the body acceleration frequency on the velocity and shear stress profiles are considered. The results show that increasing the amplitude, Ag, and reducing the lead angle of body acceleration, 9, make higher velocity profiles on the center line of both arteries. Also, the maximum wall shear stress increases when Ag increases.展开更多
The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. Ho...The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. However, domestic mining enterprises and most mining consulting and design institutes usually use general industrial indicators to carry out reserve estimation and technical and economic feasibility studies on low-grade polymetallic deposits, which cannot truly reflect the economic value of such deposits. The article expounds on the definitions of net return value (NSR) and on-site total maintenance cost (AISC) of common ore smelters in the evaluation of overseas mineral resources. Taking a low-grade polymetallic copper-molybdenum mine in Guangdong Province as an example, comparing the research results showed the NSR-AISC method and the general industrial index method in low-grade polymetallic deposit. There are huge differences in the results of reserve estimation;through the further introduction of Taylor’s formula and the research results on the relationship between investment intensity and production scale, a more reasonable mine life and investment scale are recommended, and a more in-depth comparative study has been carried out in the dimension of technical and economic indicators. Based on the comparative study of the above two methods in reserve estimation and the evaluation results of technical and economic indicators, the author believes that the NSR-AISC method can better reflect the true value of low-grade polymetallic ore projects, and should be popularized and applied in resource evaluation and development practice. This article further describes the application status of the NSR-AISC method for reserve estimation and the evaluation of technical economic indicators, and suggests the main points that should be paid attention to in the use of the NSR-AISC method.展开更多
基金supported by the National Natural Science Foundation of China(Nos.10902046,11032006and11121202)the Fundamental Research Funds for the Central Universities(lzujbky-2012-2)+1 种基金the Fund of Ministry of Education of the Program of Changjiang Scholars and Innovative Research Team in University(No.IRT0628)the Science Foundation of the Ministry of Education of China for Ph.D.program
文摘Coupled thermo-mechanical analysis of two bonded functionally graded materials subjected to thermal loads is conducted in this study with the graded finite element method. The thermal-mechanical properties of the bi-material interfaces are classified based on discontinuity degrees of their material properties and their derivatives at the interfaces. Numerical results indicate that discontinuity exerts remarkable effect on the temperature profile and stress value at the interface of two bonded functionally-graded materials. Under the thermal flux loading conditions, the stronger the interface discontinuity is, the smaller the heat flux is.
文摘The finite element method (FEM) and the boundary element method (BEM) are often adopted. However, they are not convenient to spatially vary thermal properties of functionally graded material (FGM). Therefore, the method of lines (MOL) is introduced to solve the temperature field of FGM. The basic idea of the method is to semi-discretize the governing equation into a system of ordinary differential equations (ODEs) defined on discrete lines by means of the finite difference method. The temperature field of FGM can be obtained by solving the ODEs. The functions of thermal properties are directly embodied in these equations and these properties are not discretized in the domain. Thus, difficulty of FEM and BEM is overcome by the method. As a numerical example, the temperature field of a plane problem is analyzed for FGMs through varying thermal conductivity coefficient by the MOL.
文摘An efficient approach was introduced for improving the condition of major controlled rolling process pa- rameters of roughing, finishing and coiling temperatures and optimizing these parameters to obtain minimum grain size and maximum dome height simultaneously. Taguchi method combined with grey relational analysis was applied to achieve optimum grain size and dome height during controlled rolling process. For this purpose, four levels for the above temperatures were chosen and sixteen experiments were conducted based on orthogonal array of Taguchi meth- od. Based on Taguchi approach, signal-to-noise （S/N） ratios were calculated and used in order to obtain the opti- mum levels for every input parameter. Analysis of variance revealed that finishing and coiling temperatures have the maximum effect on the grain size and dome height of microalloyed steels. The confirmation tests with the optimal levels of parameters indicated that the grain size and dome height of controlled rolled microalloyed steels can be im- proved effectively through this approach.
文摘Recently application of functionally graded materials（FGMs） have attracted a great deal of interest. These materials are composed of various materials with different micro-structures which can vary spatially in FGMs. Such composites with varying thickness and non-uniform pressure can be used in the aerospace engineering. Therefore, analysis of such composite is of high importance in engineering problems. Thermoelastic analysis of functionally graded cylinder with variable thickness under non-uniform pressure is considered. First order shear deformation theory and total potential energy approach is applied to obtain the governing equations of non-homogeneous cylinder. Considering the inner and outer solutions, perturbation series are applied to solve the governing equations. Outer solution for out of boundaries and more sensitive variable in inner solution at the boundaries are considered. Combining of inner and outer solution for near and far points from boundaries leads to high accurate displacement field distribution. The main aim of this paper is to show the capability of matched asymptotic solution for different non-homogeneous cylinders with different shapes and different non-uniform pressures. The results can be used to design the optimum thickness of the cylinder and also some properties such as high temperature residence by applying non-homogeneous material.
文摘Tarq geochemical 1:100,000 Sheet is located in Isfahan province which is investigated by Iran’s Geological and Explorations Organization using stream sediment analyzes. This area has stratigraphy of Precambrian to Quaternary rocks and is located in the Central Iran zone. According to the presence of signs of gold mineralization in this area, it is necessary to identify important mineral areas in this area. Therefore, finding information is necessary about the relationship and monitoring the elements of gold, arsenic, and antimony relative to each other in this area to determine the extent of geochemical halos and to estimate the grade. Therefore, a well-known and useful K-means method is used for monitoring the elements in the present study, this is a clustering method based on minimizing the total Euclidean distances of each sample from the center of the classes which are assigned to them. In this research, the clustering quality function and the utility rate of the sample have been used in the desired cluster (S(i)) to determine the optimum number of clusters. Finally, with regard to the cluster centers and the results, the equations were used to predict the amount of the gold element based on four parameters of arsenic and antimony grade, length and width of sampling points.
基金co-supported by the National Key R&D Program of China(Nos.2018YFF01012401-05)the National Natural Science Foundation of China(No.51975243)+2 种基金Jilin Provincial Department of Education(No.JJKH20180084KJ),Chinathe Fundamental Research Funds for the Central Universities and Jilin Provincial Department of Science&Technology Fund Project,China(Nos.20170101043JC and 20180520072JH)Graduate Innovation Fund of Jilin University,China(No.101832018C184).
文摘A Coupling Magneto-Electro-Elastic(MEE)Node-based Smoothed Radial Point Interpolation Method(CM-NS-RPIM)was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic(FGMEE)structures.By introducing the modified Newmark method,the displacement,electrical potential and magnetic potential of the structures under transient mechanical loading were obtained.Based on G space theory and the weakened weak(W2)formulation,the equations of the multi-physics coupling problems were derived.Using triangular background elements,the free vibration and transient responses of three numerical examples were studied.Results proved that CM-NS-RPIM performed better than the standard FEM by reducing the overly-stiff of structures.Moreover,CM-NS-RPIM could reduce the number of nodes while guaranteeing the accuracy.Besides,triangular elements could be generated automatically even for complex geometries.Therefore,the effectiveness and validity of CM-NS-RPIM were demonstrated,which were valuable for the design of intelligence devices,such as energy harvesters and sensors.
基金supported by the National Natural Science Foundation of China (No. 10772110)
文摘A differential constraint method is used to obtain analytical solutions of a second-grade fluid flow. By using the first-order differential constraint condition, exact solutions of Poiseuille flows, jet flows and Couette flows subjected to suction or blowing forces, and planar elongational flows are derived. In addition, two new classes of exact solutions for a second-grade fluid flow are found. The obtained exact solutions show that the non-Newtonian second-grade flow behavior depends not only on the material viscosity but also on the material elasticity. Finally, some boundary value problems are discussed.
基金Project supported by the China Postdoctoral Science Foundation(No.2018M630167)
文摘Large deformation of a cantilever axially functionally graded (AFG) beam subject to a tip load is analytically studied using the homotopy analysis method (HAM). It is assumed that its Young’s modulus varies along the longitudinal direction according to a power law. Taking the solution of the corresponding homogeneous beam as the initial guess and obtaining a convergence region by adjusting an auxiliary parameter, the analytical expressions for large deformation of the AFG beam are provided. Results obtained by the HAM are compared with those obtained by the finite element method and those in the previous works to verify its validity. Good agreement is observed. A detailed parametric study is carried out. The results show that the axial material variation can greatly change the deformed configuration, which provides an approach to control and manage the deformation of beams. By tailoring the axial material distribution, a desired deformed configuration can be obtained for a specific load. The analytical solution presented herein can be a helpful tool for this procedure.
文摘Based on the hybrid numerical method (HNM) combining with a reduced-basis method (RBM), the real-time transient response of a functionally graded material (FGM) plates is obtained. The large eigenvalue problem in wavenumber domain has been solved through real-time off-line/on-line calculation. At off-line stage, a reduced-basis space is constructed in sample wavenumbers according to the solved eigenvalue problems. The matrices independent of parameters are projected onto the reduced-basis spaces. At on-line stage, the reduced eigenvalue problems of the arbitrary wavenumbers are built. Subsequently, the responses in wavenumber domain are obtained by the approximated eigen-pairs. Because of the application of RBM, the computational cost of transient displacement analysis of FGM plate is decreased significantly, while the accuracy of the solution and the physics of the structure are still retained. The efficiency and validity of the proposed method are demonstrated through a numerical example.
基金supported jointly by the Bureau of Land Resources and Housing Management of Chongqing (Scientific & Technologic Program in 2011)
文摘Mn3O4was prepared with the chemical bath deposition(CBD) method. A Mn SO4 solution was obtained by the leaching and purifying of low-grade rhodochrosite ore(LGRO), which was used as raw material. The prepa ration procedures were studied and promoted. The result showed that the Mn3O4 with the highest purity and highes specific surface area could be obtained under the following processes. An Mn SO4 solution of 1.0 mol/L was added into a beaker under a flow rate of 30 m L/h. The p H of the reaction solution was adjusted to 10 using NH3 H2 O a80 °C. Then the solids were washed and dried at 200 °C fo2.5 h. The total Mn content(TMC) of Mn3O4 was 72.0 %The ionic distributions was formulated as [Mn2?[Mn2??0.3024Mn30.2937Mn4?h0.37860.0254]2O4. The average crys tallite size of Mn3O4 with a tetragonal hausmannite struc ture was found to be about 35 nm by X-ray diffraction(XRD) analysis. The BET specific surface area of the Mn3O4 measured was 32 m2/g.
基金Project supported by the National Natural Science Foundation of China(No.11672008)
文摘The asymptotic development method is applied to analyze the free vibration of non-uniform axially functionally graded(AFG) beams, of which the governing equations are differential equations with variable coefficients. By decomposing the variable flexural stiffness and mass per unit length into reference invariant and variant parts, the perturbation theory is introduced to obtain an approximate analytical formula of the natural frequencies of the non-uniform AFG beams with different boundary conditions.Furthermore, assuming polynomial distributions of Young's modulus and the mass density, the numerical results of the AFG beams with various taper ratios are obtained and compared with the published literature results. The discussion results illustrate that the proposed method yields an effective estimate of the first three order natural frequencies for the AFG tapered beams. However, the errors increase with the increase in the mode orders especially for the cases with variable heights. In brief, the asymptotic development method is verified to be simple and efficient to analytically study the free vibration of non-uniform AFG beams, and it could be used to analyze any tapered beams with an arbitrary varying cross width.
文摘In this paper, the kind of remanent small molecules in unsaturated polyester res(?) (UP resin) , the best extractant and the best suitalbe extractive time for measuring the content of these small molecules were studied using ultraviolet- visible spectrophotometry ( UV-VIS method). According to the principle of additivity lightness absorption for mixid solution, the contents of samll molecules in several kinds of cured UP resin were measured. It is pointed out that the UV-VIS method in the assay quality of food grade GRP products is more suitable to China.
文摘In this paper, a non-Newtonian third-grade blood in coronary and femoral arteries is simulated analytically and numerically. The blood is considered as the third- grade non-Newtonian fluid under the periodic body acceleration motion and the pulsatile pressure gradient. The hybrid multi-step differential transformation method （Hybrid-Ms- DTM） and the Crank-Nicholson method （CNM） are used to solve the partial differential equation （PDE）, and a good agreement between them is observed in the results. The effects of the some physical parameters such as the amplitude, the lead angle, and the body acceleration frequency on the velocity and shear stress profiles are considered. The results show that increasing the amplitude, Ag, and reducing the lead angle of body acceleration, 9, make higher velocity profiles on the center line of both arteries. Also, the maximum wall shear stress increases when Ag increases.
文摘The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. However, domestic mining enterprises and most mining consulting and design institutes usually use general industrial indicators to carry out reserve estimation and technical and economic feasibility studies on low-grade polymetallic deposits, which cannot truly reflect the economic value of such deposits. The article expounds on the definitions of net return value (NSR) and on-site total maintenance cost (AISC) of common ore smelters in the evaluation of overseas mineral resources. Taking a low-grade polymetallic copper-molybdenum mine in Guangdong Province as an example, comparing the research results showed the NSR-AISC method and the general industrial index method in low-grade polymetallic deposit. There are huge differences in the results of reserve estimation;through the further introduction of Taylor’s formula and the research results on the relationship between investment intensity and production scale, a more reasonable mine life and investment scale are recommended, and a more in-depth comparative study has been carried out in the dimension of technical and economic indicators. Based on the comparative study of the above two methods in reserve estimation and the evaluation results of technical and economic indicators, the author believes that the NSR-AISC method can better reflect the true value of low-grade polymetallic ore projects, and should be popularized and applied in resource evaluation and development practice. This article further describes the application status of the NSR-AISC method for reserve estimation and the evaluation of technical economic indicators, and suggests the main points that should be paid attention to in the use of the NSR-AISC method.
