This paper addresses the lane-keeping control problem for autonomous ground vehicles subject to input saturation and uncertain system parameters.An enhanced adaptive terminal sliding mode based prescribed performance ...This paper addresses the lane-keeping control problem for autonomous ground vehicles subject to input saturation and uncertain system parameters.An enhanced adaptive terminal sliding mode based prescribed performance control scheme is proposed,which enables the lateral position error of the vehicle to be kept within the prescribed performance boundaries all the time.This is achieved by firstly introducing an improved performance function into the controller design such that the stringent initial condition requirements can be relaxed,which further allows the global prescribed performance control result,and then,developing a multivariable adaptive terminal sliding mode based controller such that both input saturation and parameter uncertainties are handled effectively,which further ensures the robust lane-keeping control.Finally,the proposed control strategy is validated through numerical simulations,demonstrating its effectiveness.展开更多
Arsenic(As),classified as a Group I carcinogen by the International Agency for Research on Cancer(IARC),poses severe risks to ecosystems and human health through atmospheric exposure.This review synthesizes current kn...Arsenic(As),classified as a Group I carcinogen by the International Agency for Research on Cancer(IARC),poses severe risks to ecosystems and human health through atmospheric exposure.This review synthesizes current knowledge on the sources,health impacts,and control strategies of atmospheric arsenic,with an emphasis on its global transport and toxicity.Natural sources,such as volcanic eruptions and soil erosion,contribute approximately 2.1 Gg/year;however,anthropogenic activities,notably metal smelting and coal combustion,dominate emissions,with global anthropogenic releases reaching approximately 28.6 Gg/year.Atmospheric arsenic primarily exists in two forms:particulate matter(PM_(2.5)-bound As(Ⅴ)/As(Ⅲ)and methylated species)and gaseous forms(e.g.,AsH_(3),As_(2)O_(3)),facilitating long-range transport and cross-continental pollution,as evidenced by Asian emissions contributing 39% of Arctic deposition.Advanced techniques,such as inductively coupled plasma mass spectrometry(ICP-MS)and models like GEOS-Chem,enhance emission tracking;however,gaps persist in monitoring gaseous arsenic and refining emission inventories.Health risks include lung cancer,neurotoxicity,and cardiovascular diseases,exacerbated by inhalation and dietary exposure via contaminated crops.Control technologies,including calcium-and iron-based adsorbents and industrial scrubbers,show promise but face challenges related to efficiency and cost.Regional strategies,such as China’s tightened emission limits(0.5 mg/m^(3))and the EU’s Best Available Techniques(BAT),highlight progress,yet global cooperation remains vital for transboundary mitigation.Future research should prioritize low-cost sensors,elucidating speciation-toxicity relationships,and AI-driven emission management to address data gaps and optimize policies.Integrating multidisciplinary approaches—advanced science,stringent regulations,and international collaboration—is crucial to mitigate the environmental and public health impacts of arsenic amid growing industrialization and climate change.展开更多
An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blad...An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.展开更多
The acceleration autopilot design for skid-to-turn （STT） missile faces a great challenge owing to coupling effect among planes, variation of missile velocity and its parameters, inexistence of a complete state vecto...The acceleration autopilot design for skid-to-turn （STT） missile faces a great challenge owing to coupling effect among planes, variation of missile velocity and its parameters, inexistence of a complete state vector, and nonlinear aerodynamics. Moreover, the autopilot should be designed for the entire flight envelope where fast variations exist. In this paper, a design of integrated roll-pitch-yaw autopilot based on global fast terminal sliding mode control （GFTSMC） with a partial state nonlinear observer （PSNLO） for STT nonlinear time-varying missile model, is employed to address these issues. GFTSMC with a novel sliding surface is proposed to nullify the integral error and the singularity problem without application of the sign function. The proposed autopilot consisting of two-loop structure, controls STT maneuver and stabilizes the rolling with a PSNLO in order to estimate the immeasurable states as an output while its inputs are missile measurable states and control signals. The missile model considers the velocity variation, gravity effect and parameters＇ variation. Furthermore, the environmental conditions＇ dynamics are mod- eled. PSNLO stability and the closed loop system stability are studied. Finally, numerical simulation is established to evaluate the proposed autopilot performance and to compare it with existing approaches in the literature.展开更多
A parametric method for the gain-scheduled controller design of a linear time-varying system is given. According to the proposed scheduling method, the performance between adjacent characteristic points is preserved b...A parametric method for the gain-scheduled controller design of a linear time-varying system is given. According to the proposed scheduling method, the performance between adjacent characteristic points is preserved by the invariant eigenvalues and the gradually varying eigenvectors. A sufficient stability criterion is given by constructing a series of Lyapunov functions based on the selected discrete characteristic points. An important contribution is that it provides a simple and feasible approach for the design of gain-scheduled controllers for linear time-varying systems, which can guarantee both the global stability and the desired closed-loop performance of the resulted system. The method is applied to the design of a BTT missile autopilot and the simulation results show that the method is superior to the traditional one in sense of either global stability or system performance.展开更多
Integrator processes with long delay are difficult to control. Nonlinear characteristics of actuators make the control problem more challenging. A technique is proposed in this paper for global satisfactory control （...Integrator processes with long delay are difficult to control. Nonlinear characteristics of actuators make the control problem more challenging. A technique is proposed in this paper for global satisfactory control （GSC） of such processes with relay-type nonlinearity. An oscillatory control signal is injected into the nonlinear process; the amplitude and frequency of the oscillatory signal are designed to linearise the nonlinear process in the sense of harmonic analysis; and a state feedback controller is configured to implement GSC over the linearised process. An illustrative example is given to demonstrate the effectiveness of展开更多
The global economic downturn caused primarily by the US sub-prime mortgage crisis in 2007 engendered revenue loss of the multinational corporations. Existing studies have yet to depict the detrimental impacts on city...The global economic downturn caused primarily by the US sub-prime mortgage crisis in 2007 engendered revenue loss of the multinational corporations. Existing studies have yet to depict the detrimental impacts on city＇s command and control functions induced by the sub-prime mortgage crisis together with its residual wave of global economic recession on the global spatial economy. Recent and previous studies have produced an ＇instant history＇ of the global spatial economy before the global economic downturn undermines the global economy in late 2008. How- ever, the waxes and wanes of major cities＇ command and control functions on the global economic arena before and after the outbreak of financial crisis and its associated geo-economic transitions are still poorly understood. This paper attempts to contribute a new set of customized data to update and fill in the gap in the literature with the investigation of the command and control functions of cities arotmd the world from 2005 to 2009. Particular attentions are paid to the time-space relationship of the geo-economic transition that can capture the recent historical images of the com- mand and control situation of different cities in the world.展开更多
Most existing formation control approaches for Unmanned Aerial Vehicle(UAV)swarm assume that global position and global coordinate frame are directly available for each agent.To extend the application domain,this pape...Most existing formation control approaches for Unmanned Aerial Vehicle(UAV)swarm assume that global position and global coordinate frame are directly available for each agent.To extend the application domain,this paper proposes a distributed bearing-based formation control scheme,without any reliance on global position or global coordinate frame.The interactions among UAVs are described by a directed topology with two-leader structure.To address the issue of unavailable global coordinate frame,we first present a distributed orientation estimation law for each UAV to determine its orientation under the coordinate frame of the first leader.Based on the orientation estimation,we then design a bearing-based formation control law to globally asymptotically track target moving formations.Finally,simulation results are provided to validate the proposed method,which show that the translation,scale and orientation of the formation can be flexibly controlled via two leaders.展开更多
This paper presents a new four-dimensional（4 D） autonomous chaotic system which has first Lyapunov exponent of about 22 and is comparatively larger than many existing three-dimensional（3 D） and 4 D chaotic systems...This paper presents a new four-dimensional（4 D） autonomous chaotic system which has first Lyapunov exponent of about 22 and is comparatively larger than many existing three-dimensional（3 D） and 4 D chaotic systems.The proposed system exhibits hyperbolic curve and circular paraboloid types of equilibria.The system has all zero eigenvalues for a particular case of an equilibrium point.The system has various dynamical behaviors like hyperchaotic,chaotic,periodic,and quasi-periodic.The system also exhibits coexistence of attractors.Dynamical behavior of the new system is validated using circuit implementation.Further an interesting switching synchronization phenomenon is proposed for the new chaotic system.An adaptive global integral sliding mode control is designed for the switching synchronization of the proposed system.In the switching synchronization,the synchronization is shown for the switching chaotic,stable,periodic,and hybrid synchronization behaviors.Performance of the controller designed in the paper is compared with an existing controller.展开更多
A global fast convergent integrated guidance and control design approach is proposed. A disturbance observer is utilized to estimate the uncertainties of integrated guidance and control model in finite time. According...A global fast convergent integrated guidance and control design approach is proposed. A disturbance observer is utilized to estimate the uncertainties of integrated guidance and control model in finite time. According to the multiple sliding-mode surface control, the independent nonsingular terminal sliding functions are presented in each step, and all the sliding-mode surfaces run parallel. These presented sliding-mode surfaces keep zero value from a certain time, and the system states converge quickly in sliding phase. Therefore, the system response speed is increased. The proposed method offers the global convergent time analytically, which is useful to optimize the transient performance of system. Simulation results are used to verify the proposed method.展开更多
A series elastic actuator(SEA) is a powerful device in the area of human-machine integration, but it still suffers from difficult position control issues. Therefore, in this paper,an efficient approach is proposed to ...A series elastic actuator(SEA) is a powerful device in the area of human-machine integration, but it still suffers from difficult position control issues. Therefore, in this paper,an efficient approach is proposed to solve this problem. The approach design is divided into two steps: feedback linearization(FL) and global sliding mode(GSM) controller design. The bounded analysis is presented and global asymptotic convergence is analytically proven. Simulation and experiment results illustrate the effectiveness of the proposed scheme.展开更多
This paper presents a design of optimal controllers with respect to a meaningful cost function to force an underactuated omni-directional intelligent navigator （ODIN） under unknown constant environmental loads to tr...This paper presents a design of optimal controllers with respect to a meaningful cost function to force an underactuated omni-directional intelligent navigator （ODIN） under unknown constant environmental loads to track a reference trajectory in two-dimensional space. Motivated by the vehicle＇s steering practice, the yaw angle regarded as a virtual control plus the surge thrust force are used to force the position of the vehicle to globally track its reference trajectory. The control design is based on several recent results developed for inverse optimal control and stability analysis of nonlinear systems, a new design of bounded disturbance observers, and backstepping and Lyapunov＇s direct methods. Both state- and output-feedback control designs are addressed. Simulations are included to illustrate the effectiveness of the proposed results.展开更多
A bio-inspired global finite time control using global fast-terminal sliding mode controller and radial basis function network is presented in this article,to address the attitude tracking control problem of the three...A bio-inspired global finite time control using global fast-terminal sliding mode controller and radial basis function network is presented in this article,to address the attitude tracking control problem of the three degree-of-freedom four-rotor hover system.The proposed controller provides convergence of system states in a predetermined finite time and estimates the unmodeled dynamics of the four-rotor system.Dynamic model of the four-rotor system is derived with Newton’s force equations.The unknown dynamics of four-rotor systems are estimated using Radial basis function.The bio-inspired global fast terminal sliding mode controller is proposed to provide chattering free finite time error convergence and to provide optimal tracking of the attitude angles while being subjected to unknown dynamics.The global stability proof of the designed controller is provided on the basis of Lyapunov stability theorem.The proposed controller is validated by(i)conducting an experiment through implementing it on the laboratory-based hover system,and(ii)through simulations.Performance of the proposed control scheme is also compared with classical and intelligent controllers.The performance comparison exhibits that the designed controller has quick transient response and improved chattering free steady state performance.The proposed bioinspired global fast terminal sliding mode controller offers improved estimation and better tracking performance than the traditional controllers.In addition,the proposed controller is computationally cost effective and can be implanted on multirotor unmanned air vehicles with limited computational processing capabilities.展开更多
A series of quality control(QC) procedures were performed on a gauge-based global daily precipitation dataset from the Global Telecommunication System(GTS) for the period 1980-2009.A new global daily precipitation(NGD...A series of quality control(QC) procedures were performed on a gauge-based global daily precipitation dataset from the Global Telecommunication System(GTS) for the period 1980-2009.A new global daily precipitation(NGDP) dataset was constructed by applying those QC procedures to eliminate erroneous records.The NGDP dataset was evaluated using the NOAA Climate Prediction Center Merged Analysis of Precipitation(CMAP) and the Global Precipitation Climatology Project(GPCP) precipitation datasets.The results showed that the frequency distribution and spatial distribution pattern of NGDP had a nice match with those from the CMAP and GPCP datasets.The global mean correlation coefficients with the CMAP and GPCP data increased from 0.24 for original GTS precipitation data to about 0.70 for NGDP data.Correspondingly,the root mean square errors(RMSE) decreased from 12 mm per day to 1 mm per day.The interannual variabilities of NGDP monthly precipitation are consistent with the CMAP and GPCP datasets in Asia.Meanwhile,the seasonal variabilities for most land areas on the Earth of NGDP dataset are also consistent with the CMAP and GPCP precipitation products.展开更多
This paper proposes an optimization algorithm based on a multi-loop control system with a neural network controller,in which the objective function that is used is the control plant of each sub-control system.To obtai...This paper proposes an optimization algorithm based on a multi-loop control system with a neural network controller,in which the objective function that is used is the control plant of each sub-control system.To obtain the global optimization solution from a control plant that has many local minimum points,a transformation function is presented.On the one hand,this approach changes a complex objective function into a simple function under the condition of an unchanged globally optimal solution,to find the global optimization solution more easily by using a multi-loop control system.On the other hand,a special neural network(in which the node function can be simply positioned locally)that is composed of multiple transformation functions is used as the controller,which reduces the possibility of falling into local minimum points.At the same time,a filled function is presented as a control law;it can jump out of a local minimum point and move to another local minimum point that has a smaller value of the objective function.Finally,18 simulation examples are provided to show the effectiveness of the proposed method.展开更多
Some papers on stochastic adaptive control schemes have established convergence algorithm using a least-squares parameters. With the popular application of GPC, global convergence has become a key problem in automatic...Some papers on stochastic adaptive control schemes have established convergence algorithm using a least-squares parameters. With the popular application of GPC, global convergence has become a key problem in automatic control theory. However, now global convergence of GPC has not been established for algorithms in computing a least squares iteration. A generalized model of adaptive generalized predictive control is presented. The global convergebce is also given on the basis of estimating the parameters of GPC by least squares algorithm.展开更多
Network flow control is formulated as a global optimization problem of user profit. A general global optimization flow control model is established. This model combined with the stochastic model of TCP is used to stud...Network flow control is formulated as a global optimization problem of user profit. A general global optimization flow control model is established. This model combined with the stochastic model of TCP is used to study the global rate allocation characteristic of TCP. Analysis shows when active queue management is used in network TCP rates tend to be allocated to maximize the aggregate of a user utility functionU s (called,U s fairness). The TCP throughput formula is derived An improved TCP congestion control mechanism is proposed. Simulations show its throughput is TCP friendly when competing with existing TCP and its rate change is smoother. Therefore, it is suitable to carry multimedia applications.展开更多
This paper investigates the problem of global output feedback stabilization for a class of feedforward nonlinear systems via linear sampled-data control. To solve the problem, we first construct a linear sampled-data ...This paper investigates the problem of global output feedback stabilization for a class of feedforward nonlinear systems via linear sampled-data control. To solve the problem, we first construct a linear sampled-data observer and controller. Then, a scaling gain is introduced into the proposed observer and controller. Finally, we use the sampled-data output feedback domination approach to find the explicit formula for choosing the scaling gain and the sampling period which renders the closed-loop system globally asymptotically stable. A simulation example is given to demonstrate the effectiveness of the proposed design procedure.展开更多
In this paper, the global controllability for a class of high dimensional polynomial systems has been investigated and a constructive algebraic criterion algorithm for their global controllability has been obtained. B...In this paper, the global controllability for a class of high dimensional polynomial systems has been investigated and a constructive algebraic criterion algorithm for their global controllability has been obtained. By the criterion algorithm, the global controllability can be determined in finite steps of arithmetic operations. The algorithm is imposed on the coefficients of the polynomials only and the analysis technique is based on Sturm Theorem in real algebraic geometry and its modern progress. Finally, the authors will give some examples to show the application of our results.展开更多
Drug treatment, snail control, cercariae control, improved sanitation and health education are the effective strategies which are used to control the schistosomiasis. In this paper, we consider a deterministic model f...Drug treatment, snail control, cercariae control, improved sanitation and health education are the effective strategies which are used to control the schistosomiasis. In this paper, we consider a deterministic model for schistosomiasis transmission dynamics in order to explore the role of the several control strategies. The global stability of a schistosomiasis infection model that involves mating structure including male schistosomes, female schistosomes, paired schistosomes and snails is studied by constructing appropriate Lyapunov functions. We derive the basic reproduction number R0 for the deterministic model, and establish that the global dynamics are completely determined by the values of R0. We show that the disease can be eradicated when R0?≤1;otherwise, the system is persistent. In the case where ?R0?>1, we prove the existence, uniqueness and global asymptotic stability of an endemic steady state. Sensitivity analysis and simulations are carried out in order to determine the relative importance of different control strategies for disease transmission and prevalence. Next, optimal control theory is applied to investigate the control strategies for eliminating schistosomiasis using time dependent controls. The characterization of the optimal control is carried out via the Pontryagins Maximum Principle. The simulation results demonstrate that the insecticide is important in the control of schistosomiasis.展开更多
基金supported in part by the National Key Research and Development Program of China under Grant 2023YFA1011803in part by Natural Science Foundation of Chongqing,China under Grant CSTB2023NSCQ-MSX0588+2 种基金in part by the Fundamental Research Funds for the Central Universities,China under Grant 2023CDJKYJH047in part by the National Natural Science Foundation of China under Grant 62273064,Grant 61991400,Grant 61991403,Grant 61933012,Grant 62250710167,Grant 62203078in part by Innovation Support Program for International Students Returning to China under Grant cx2022016.
文摘This paper addresses the lane-keeping control problem for autonomous ground vehicles subject to input saturation and uncertain system parameters.An enhanced adaptive terminal sliding mode based prescribed performance control scheme is proposed,which enables the lateral position error of the vehicle to be kept within the prescribed performance boundaries all the time.This is achieved by firstly introducing an improved performance function into the controller design such that the stringent initial condition requirements can be relaxed,which further allows the global prescribed performance control result,and then,developing a multivariable adaptive terminal sliding mode based controller such that both input saturation and parameter uncertainties are handled effectively,which further ensures the robust lane-keeping control.Finally,the proposed control strategy is validated through numerical simulations,demonstrating its effectiveness.
文摘Arsenic(As),classified as a Group I carcinogen by the International Agency for Research on Cancer(IARC),poses severe risks to ecosystems and human health through atmospheric exposure.This review synthesizes current knowledge on the sources,health impacts,and control strategies of atmospheric arsenic,with an emphasis on its global transport and toxicity.Natural sources,such as volcanic eruptions and soil erosion,contribute approximately 2.1 Gg/year;however,anthropogenic activities,notably metal smelting and coal combustion,dominate emissions,with global anthropogenic releases reaching approximately 28.6 Gg/year.Atmospheric arsenic primarily exists in two forms:particulate matter(PM_(2.5)-bound As(Ⅴ)/As(Ⅲ)and methylated species)and gaseous forms(e.g.,AsH_(3),As_(2)O_(3)),facilitating long-range transport and cross-continental pollution,as evidenced by Asian emissions contributing 39% of Arctic deposition.Advanced techniques,such as inductively coupled plasma mass spectrometry(ICP-MS)and models like GEOS-Chem,enhance emission tracking;however,gaps persist in monitoring gaseous arsenic and refining emission inventories.Health risks include lung cancer,neurotoxicity,and cardiovascular diseases,exacerbated by inhalation and dietary exposure via contaminated crops.Control technologies,including calcium-and iron-based adsorbents and industrial scrubbers,show promise but face challenges related to efficiency and cost.Regional strategies,such as China’s tightened emission limits(0.5 mg/m^(3))and the EU’s Best Available Techniques(BAT),highlight progress,yet global cooperation remains vital for transboundary mitigation.Future research should prioritize low-cost sensors,elucidating speciation-toxicity relationships,and AI-driven emission management to address data gaps and optimize policies.Integrating multidisciplinary approaches—advanced science,stringent regulations,and international collaboration—is crucial to mitigate the environmental and public health impacts of arsenic amid growing industrialization and climate change.
基金supported by the National Natural Science Foundation of China(No.51576007)Civil Aircraft Special Research of China(No.MJZ-016-D-30)
文摘An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.
基金co-supported by the National Natural Science Foundation of China (No.61304077)International Science & Technology Cooperation Program of China (No.2015DFA01710)+3 种基金the Natural Science Foundation of Jiangsu Province of China (No.BK20130765)the Chinese Ministry of Education Project of Humanities and Social Sciences (No.13YJCZH171)the 11th Jiangsu Province Six Talent Peaks of High Level Talents Project of China (No.2014_ZBZZ_005)the Jiangsu Province Project Blue: Young Academic Leaders Project
文摘The acceleration autopilot design for skid-to-turn （STT） missile faces a great challenge owing to coupling effect among planes, variation of missile velocity and its parameters, inexistence of a complete state vector, and nonlinear aerodynamics. Moreover, the autopilot should be designed for the entire flight envelope where fast variations exist. In this paper, a design of integrated roll-pitch-yaw autopilot based on global fast terminal sliding mode control （GFTSMC） with a partial state nonlinear observer （PSNLO） for STT nonlinear time-varying missile model, is employed to address these issues. GFTSMC with a novel sliding surface is proposed to nullify the integral error and the singularity problem without application of the sign function. The proposed autopilot consisting of two-loop structure, controls STT maneuver and stabilizes the rolling with a PSNLO in order to estimate the immeasurable states as an output while its inputs are missile measurable states and control signals. The missile model considers the velocity variation, gravity effect and parameters＇ variation. Furthermore, the environmental conditions＇ dynamics are mod- eled. PSNLO stability and the closed loop system stability are studied. Finally, numerical simulation is established to evaluate the proposed autopilot performance and to compare it with existing approaches in the literature.
基金supported by the National Natural Science Foundation of China (60474015)Program for Changjiang Scholars and Innovative Research Team in University
文摘A parametric method for the gain-scheduled controller design of a linear time-varying system is given. According to the proposed scheduling method, the performance between adjacent characteristic points is preserved by the invariant eigenvalues and the gradually varying eigenvectors. A sufficient stability criterion is given by constructing a series of Lyapunov functions based on the selected discrete characteristic points. An important contribution is that it provides a simple and feasible approach for the design of gain-scheduled controllers for linear time-varying systems, which can guarantee both the global stability and the desired closed-loop performance of the resulted system. The method is applied to the design of a BTT missile autopilot and the simulation results show that the method is superior to the traditional one in sense of either global stability or system performance.
文摘Integrator processes with long delay are difficult to control. Nonlinear characteristics of actuators make the control problem more challenging. A technique is proposed in this paper for global satisfactory control （GSC） of such processes with relay-type nonlinearity. An oscillatory control signal is injected into the nonlinear process; the amplitude and frequency of the oscillatory signal are designed to linearise the nonlinear process in the sense of harmonic analysis; and a state feedback controller is configured to implement GSC over the linearised process. An illustrative example is given to demonstrate the effectiveness of
基金Foundation item:Under the auspices of Hui Oi Chow Trust Fund(No.200902172004)Mrs.Li Ka Shing Fund,Strategic Research Theme on Contemporary China,Small Project Funding provided by the University of Hong Kong(No.200807176152)
文摘The global economic downturn caused primarily by the US sub-prime mortgage crisis in 2007 engendered revenue loss of the multinational corporations. Existing studies have yet to depict the detrimental impacts on city＇s command and control functions induced by the sub-prime mortgage crisis together with its residual wave of global economic recession on the global spatial economy. Recent and previous studies have produced an ＇instant history＇ of the global spatial economy before the global economic downturn undermines the global economy in late 2008. How- ever, the waxes and wanes of major cities＇ command and control functions on the global economic arena before and after the outbreak of financial crisis and its associated geo-economic transitions are still poorly understood. This paper attempts to contribute a new set of customized data to update and fill in the gap in the literature with the investigation of the command and control functions of cities arotmd the world from 2005 to 2009. Particular attentions are paid to the time-space relationship of the geo-economic transition that can capture the recent historical images of the com- mand and control situation of different cities in the world.
基金supported by the National Science and Technology Major Project,China(No.2017-V-0010-0060)the National Natural Science Foundation of China(No.51620105010,51805026,51675019)+1 种基金the National Basic Research Program of China(No.JCKY2018601C107)China Scholarship Council(No.201906020030).
文摘Most existing formation control approaches for Unmanned Aerial Vehicle(UAV)swarm assume that global position and global coordinate frame are directly available for each agent.To extend the application domain,this paper proposes a distributed bearing-based formation control scheme,without any reliance on global position or global coordinate frame.The interactions among UAVs are described by a directed topology with two-leader structure.To address the issue of unavailable global coordinate frame,we first present a distributed orientation estimation law for each UAV to determine its orientation under the coordinate frame of the first leader.Based on the orientation estimation,we then design a bearing-based formation control law to globally asymptotically track target moving formations.Finally,simulation results are provided to validate the proposed method,which show that the translation,scale and orientation of the formation can be flexibly controlled via two leaders.
基金supported by the National Natural Science Foundation of China(Grant No.11772306)
文摘This paper presents a new four-dimensional（4 D） autonomous chaotic system which has first Lyapunov exponent of about 22 and is comparatively larger than many existing three-dimensional（3 D） and 4 D chaotic systems.The proposed system exhibits hyperbolic curve and circular paraboloid types of equilibria.The system has all zero eigenvalues for a particular case of an equilibrium point.The system has various dynamical behaviors like hyperchaotic,chaotic,periodic,and quasi-periodic.The system also exhibits coexistence of attractors.Dynamical behavior of the new system is validated using circuit implementation.Further an interesting switching synchronization phenomenon is proposed for the new chaotic system.An adaptive global integral sliding mode control is designed for the switching synchronization of the proposed system.In the switching synchronization,the synchronization is shown for the switching chaotic,stable,periodic,and hybrid synchronization behaviors.Performance of the controller designed in the paper is compared with an existing controller.
基金Project(61673386)supported by the National Natural Science Foundation of ChinaProject(2018QNJJ006)supported by the High-Tech Institute of Xi’an,China
文摘A global fast convergent integrated guidance and control design approach is proposed. A disturbance observer is utilized to estimate the uncertainties of integrated guidance and control model in finite time. According to the multiple sliding-mode surface control, the independent nonsingular terminal sliding functions are presented in each step, and all the sliding-mode surfaces run parallel. These presented sliding-mode surfaces keep zero value from a certain time, and the system states converge quickly in sliding phase. Therefore, the system response speed is increased. The proposed method offers the global convergent time analytically, which is useful to optimize the transient performance of system. Simulation results are used to verify the proposed method.
基金supported in part by the National Natural Science Foundation of China(61573198)
文摘A series elastic actuator(SEA) is a powerful device in the area of human-machine integration, but it still suffers from difficult position control issues. Therefore, in this paper,an efficient approach is proposed to solve this problem. The approach design is divided into two steps: feedback linearization(FL) and global sliding mode(GSM) controller design. The bounded analysis is presented and global asymptotic convergence is analytically proven. Simulation and experiment results illustrate the effectiveness of the proposed scheme.
基金Supported in Part by the Australian Research Council under Grant DP0988424
文摘This paper presents a design of optimal controllers with respect to a meaningful cost function to force an underactuated omni-directional intelligent navigator （ODIN） under unknown constant environmental loads to track a reference trajectory in two-dimensional space. Motivated by the vehicle＇s steering practice, the yaw angle regarded as a virtual control plus the surge thrust force are used to force the position of the vehicle to globally track its reference trajectory. The control design is based on several recent results developed for inverse optimal control and stability analysis of nonlinear systems, a new design of bounded disturbance observers, and backstepping and Lyapunov＇s direct methods. Both state- and output-feedback control designs are addressed. Simulations are included to illustrate the effectiveness of the proposed results.
文摘A bio-inspired global finite time control using global fast-terminal sliding mode controller and radial basis function network is presented in this article,to address the attitude tracking control problem of the three degree-of-freedom four-rotor hover system.The proposed controller provides convergence of system states in a predetermined finite time and estimates the unmodeled dynamics of the four-rotor system.Dynamic model of the four-rotor system is derived with Newton’s force equations.The unknown dynamics of four-rotor systems are estimated using Radial basis function.The bio-inspired global fast terminal sliding mode controller is proposed to provide chattering free finite time error convergence and to provide optimal tracking of the attitude angles while being subjected to unknown dynamics.The global stability proof of the designed controller is provided on the basis of Lyapunov stability theorem.The proposed controller is validated by(i)conducting an experiment through implementing it on the laboratory-based hover system,and(ii)through simulations.Performance of the proposed control scheme is also compared with classical and intelligent controllers.The performance comparison exhibits that the designed controller has quick transient response and improved chattering free steady state performance.The proposed bioinspired global fast terminal sliding mode controller offers improved estimation and better tracking performance than the traditional controllers.In addition,the proposed controller is computationally cost effective and can be implanted on multirotor unmanned air vehicles with limited computational processing capabilities.
基金supported by the National Natural Science Foundation(No. 40905046,No.41175066)the National High Technology Research and Development Program(No.2009AA1220005, No.2009BAC51B03)the National Basic Research Program (No.2010CB951902)of China
文摘A series of quality control(QC) procedures were performed on a gauge-based global daily precipitation dataset from the Global Telecommunication System(GTS) for the period 1980-2009.A new global daily precipitation(NGDP) dataset was constructed by applying those QC procedures to eliminate erroneous records.The NGDP dataset was evaluated using the NOAA Climate Prediction Center Merged Analysis of Precipitation(CMAP) and the Global Precipitation Climatology Project(GPCP) precipitation datasets.The results showed that the frequency distribution and spatial distribution pattern of NGDP had a nice match with those from the CMAP and GPCP datasets.The global mean correlation coefficients with the CMAP and GPCP data increased from 0.24 for original GTS precipitation data to about 0.70 for NGDP data.Correspondingly,the root mean square errors(RMSE) decreased from 12 mm per day to 1 mm per day.The interannual variabilities of NGDP monthly precipitation are consistent with the CMAP and GPCP datasets in Asia.Meanwhile,the seasonal variabilities for most land areas on the Earth of NGDP dataset are also consistent with the CMAP and GPCP precipitation products.
基金supported by the National Natural Science Foundation of China(61273190)
文摘This paper proposes an optimization algorithm based on a multi-loop control system with a neural network controller,in which the objective function that is used is the control plant of each sub-control system.To obtain the global optimization solution from a control plant that has many local minimum points,a transformation function is presented.On the one hand,this approach changes a complex objective function into a simple function under the condition of an unchanged globally optimal solution,to find the global optimization solution more easily by using a multi-loop control system.On the other hand,a special neural network(in which the node function can be simply positioned locally)that is composed of multiple transformation functions is used as the controller,which reduces the possibility of falling into local minimum points.At the same time,a filled function is presented as a control law;it can jump out of a local minimum point and move to another local minimum point that has a smaller value of the objective function.Finally,18 simulation examples are provided to show the effectiveness of the proposed method.
基金This project was supported by the National Natural Science Foundation of China (60174021) Tianjin Advanced School Science and Technology Development Foundation (01 - 20403) .
文摘Some papers on stochastic adaptive control schemes have established convergence algorithm using a least-squares parameters. With the popular application of GPC, global convergence has become a key problem in automatic control theory. However, now global convergence of GPC has not been established for algorithms in computing a least squares iteration. A generalized model of adaptive generalized predictive control is presented. The global convergebce is also given on the basis of estimating the parameters of GPC by least squares algorithm.
文摘Network flow control is formulated as a global optimization problem of user profit. A general global optimization flow control model is established. This model combined with the stochastic model of TCP is used to study the global rate allocation characteristic of TCP. Analysis shows when active queue management is used in network TCP rates tend to be allocated to maximize the aggregate of a user utility functionU s (called,U s fairness). The TCP throughput formula is derived An improved TCP congestion control mechanism is proposed. Simulations show its throughput is TCP friendly when competing with existing TCP and its rate change is smoother. Therefore, it is suitable to carry multimedia applications.
基金This work was supported by the National Natural Science Foundation of China （Nos. 61104068, 61273119） Natural Science Foundation of Jiangsu Province （No. BK2010200）+1 种基金 China Postdoctoral Science Foundation Founded Project （No. 2012M511176） the Fundamental Research Funds for the Central Universities （No. 2242013R30006）.
文摘This paper investigates the problem of global output feedback stabilization for a class of feedforward nonlinear systems via linear sampled-data control. To solve the problem, we first construct a linear sampled-data observer and controller. Then, a scaling gain is introduced into the proposed observer and controller. Finally, we use the sampled-data output feedback domination approach to find the explicit formula for choosing the scaling gain and the sampling period which renders the closed-loop system globally asymptotically stable. A simulation example is given to demonstrate the effectiveness of the proposed design procedure.
基金supported by the Natural Science Foundation of China under Grant Nos.60804008,61174048and 11071263the Fundamental Research Funds for the Central Universities and Guangdong Province Key Laboratory of Computational Science at Sun Yat-Sen University
文摘In this paper, the global controllability for a class of high dimensional polynomial systems has been investigated and a constructive algebraic criterion algorithm for their global controllability has been obtained. By the criterion algorithm, the global controllability can be determined in finite steps of arithmetic operations. The algorithm is imposed on the coefficients of the polynomials only and the analysis technique is based on Sturm Theorem in real algebraic geometry and its modern progress. Finally, the authors will give some examples to show the application of our results.
文摘Drug treatment, snail control, cercariae control, improved sanitation and health education are the effective strategies which are used to control the schistosomiasis. In this paper, we consider a deterministic model for schistosomiasis transmission dynamics in order to explore the role of the several control strategies. The global stability of a schistosomiasis infection model that involves mating structure including male schistosomes, female schistosomes, paired schistosomes and snails is studied by constructing appropriate Lyapunov functions. We derive the basic reproduction number R0 for the deterministic model, and establish that the global dynamics are completely determined by the values of R0. We show that the disease can be eradicated when R0?≤1;otherwise, the system is persistent. In the case where ?R0?>1, we prove the existence, uniqueness and global asymptotic stability of an endemic steady state. Sensitivity analysis and simulations are carried out in order to determine the relative importance of different control strategies for disease transmission and prevalence. Next, optimal control theory is applied to investigate the control strategies for eliminating schistosomiasis using time dependent controls. The characterization of the optimal control is carried out via the Pontryagins Maximum Principle. The simulation results demonstrate that the insecticide is important in the control of schistosomiasis.
