Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,a...Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.展开更多
Insects usually fly by passively rotating wings,which has been applied to the design of flapping-wing Micro-Air Vehicles(MAVs)to reduce mechanical complexity.In this paper,a robotic passive rotating-wing model is desi...Insects usually fly by passively rotating wings,which has been applied to the design of flapping-wing Micro-Air Vehicles(MAVs)to reduce mechanical complexity.In this paper,a robotic passive rotating-wing model is designed to investigate wing kinematics and lift generation,which are measured by a high-speed camera and a force transducer,respectively.In addition,flow fields are measured using the Particle Image Velocimetry(PIV).Experimental results demonstrate that passive rotating motion has a coordinative relationship with actively stroking motion.As the stroke amplitude or frequency increases,the rotating amplitude is enlarged.To characterize the active stroking motion,a driving Reynolds number Redrivingis defined,which varies from 68 to 366 in this study.Moving the gravity center of the wing towards trailing ed ge induces the increase of additional torque M,which decreases the wing rotating amplitude and promotes the advance of wing rotation.We find that the timing of wing rotation is gradually delayed and the mean lift coefficient C^(-)_(L)monotonously decreases as Redrivingincreases.By increasing the additional torque M,C^(-)_(L)is slightly improved and approaches to the lift coefficient of a real fruit fly at driving Re approximately equal to 230.The instantaneous lifts combined with the vortical structures further demonstrate that the lift generation associated with wing rotation is mainly attributed to the growth of the LeadingEdge Vortex(LEV)and the passive wake capture mechanism.Passive wake capture is influenced by LEV,reversal stroke motion and wing additional torque together,which can only maintain the lift at a high level for a considerable period.The high-lift generation mechanisms of flapping and passive rotating flight could shed light on the simplified design of MAVs and the improvement of their aerodynamic performance.展开更多
The emergence of next generation networks(NextG),including 5G and beyond,is reshaping the technological landscape of cellular and mobile networks.These networks are sufficiently scaled to interconnect billions of user...The emergence of next generation networks(NextG),including 5G and beyond,is reshaping the technological landscape of cellular and mobile networks.These networks are sufficiently scaled to interconnect billions of users and devices.Researchers in academia and industry are focusing on technological advancements to achieve highspeed transmission,cell planning,and latency reduction to facilitate emerging applications such as virtual reality,the metaverse,smart cities,smart health,and autonomous vehicles.NextG continuously improves its network functionality to support these applications.Multiple input multiple output(MIMO)technology offers spectral efficiency,dependability,and overall performance in conjunctionwithNextG.This article proposes a secure channel estimation technique in MIMO topology using a norm-estimation model to provide comprehensive insights into protecting NextG network components against adversarial attacks.The technique aims to create long-lasting and secure NextG networks using this extended approach.The viability of MIMO applications and modern AI-driven methodologies to combat cybersecurity threats are explored in this research.Moreover,the proposed model demonstrates high performance in terms of reliability and accuracy,with a 20%reduction in the MalOut-RealOut-Diff metric compared to existing state-of-the-art techniques.展开更多
To investigate the overall performance of reverse energy bypass scramjet,firstly a variable spe⁃cific heat method combined with a chemical balance calculation module for combustion products were used to es⁃tablish a b...To investigate the overall performance of reverse energy bypass scramjet,firstly a variable spe⁃cific heat method combined with a chemical balance calculation module for combustion products were used to es⁃tablish a benchmark scramjet performance evaluation model.Based on the test data of typical flying point of Mach 7 with the altitude of 29 km,the reliability of the model was verified.The deviations of parameters such as the to⁃tal pressure loss of combustor between the model and the test data were analyzed.Furtherly,an analytical method for post-combustion magnetohydrodynamic power generation was established;by embedding the above method into the overall performance evaluation model,performance prediction considering the power generation effect was realized.Finally,based on the above model,variety regulations of the inlet and the outlet parameters of the power generation channel and performance parameters including the engine specific impulse and the unit thrust under different enthalpy extraction ratios and load factors were analyzed.It could be concluded that the model can reliably predict the variations of key parameters.As the value of the load factor increases,the value of the conduc⁃tivity required to reach the specified enthalpy extraction ratio first decreases and then increases,which is approxi⁃mately parabolic.In order to reduce the demand for the gas conductivity for MHD power generation,the load fac⁃tor should be around 0.5.When the load factor is 0.4 and the magnetic induction intensity is 2.5 T,if the enthalpy extraction ratio reaches 0.5%,the engine specific impulse performance reduces about 3.58%.展开更多
The generation of optical vortices from nonlinear photonic crystals(NPCs)with spatially modulated second-order nonlinearity offers a promising approach to extend the working wavelength and topological charge of vortex...The generation of optical vortices from nonlinear photonic crystals(NPCs)with spatially modulated second-order nonlinearity offers a promising approach to extend the working wavelength and topological charge of vortex beams for various applications.In this work,the second harmonic(SH)optical vortex beams generated from nonlinear fork gratings under Gaussian beam illumination are numerically investigated.The far-field intensity and phase distributions,as well as the orbital angular momentum(OAM)spectra of the SH beams,are analyzed for different structural topological charges and diffraction orders.Results reveal that higher-order diffraction and larger structural topological charges lead to angular interference patterns and non-uniform intensity distributions,deviating from the standard vortex profile.To optimize the SH vortex quality,the effects of the fundamental wave beam waist,crystal thickness,and grating duty cycle are explored.It is shown that increasing the beam waist can effectively suppress diffraction order interference and improve the beam’s quality.This study provides theoretical guidance for enhancing the performance of nonlinear optical devices based on NPCs.展开更多
The modification of the perovskite surface using functional additives is one of the most promising strategies to reduce nonradiative recombination and improve the stability of perovskite solar cells(PSCs).In this work...The modification of the perovskite surface using functional additives is one of the most promising strategies to reduce nonradiative recombination and improve the stability of perovskite solar cells(PSCs).In this work,a novel quaternary pyridinium-based halide salt,1-ethyl-4-(methoxycarbonyl)pyridinium iodide(EMCP-I),is introduced as an effective post-treatment molecule to improve the quality of the perovskite film.EMCP-I exhibits dual functionality to passivate both negatively and positively charged defects and improve the film morphology.Furthermore,the treatment fine-tunes energy level alignment between the perovskite layer and the hole transport layer(HTL),facilitating more efficient charge transport.Consequently,EMCP-I-treated devices achieve a remarkable power conversion efficiency(PCE)improvement from 20.5% to 22.6%,driven primarily by an enhanced open-circuit voltage(VOC).Beyond efficiency gains,the treatment significantly enhances the environmental and operational stabilities of solar cells.This work provides a guide for tailoring quaternary pyridinium-based molecules for simultaneous improvement of the efficiency and stability of PSCs.展开更多
The application of generative artificial intelligence(AI)is bringing about notable changes in anime creation.This paper surveys recent advancements and applications of diffusion and language models in anime generation...The application of generative artificial intelligence(AI)is bringing about notable changes in anime creation.This paper surveys recent advancements and applications of diffusion and language models in anime generation,focusing on their demonstrated potential to enhance production efficiency through automation and personalization.Despite these benefits,it is crucial to acknowledge the substantial initial computational investments required for training and deploying these models.We conduct an in-depth survey of cutting-edge generative AI technologies,encompassing models such as Stable Diffusion and GPT,and appraise pivotal large-scale datasets alongside quantifiable evaluation metrics.Review of the surveyed literature indicates the achievement of considerable maturity in the capacity of AI models to synthesize high-quality,aesthetically compelling anime visual images from textual prompts,alongside discernible progress in the generation of coherent narratives.However,achieving perfect long-form consistency,mitigating artifacts like flickering in video sequences,and enabling fine-grained artistic control remain critical ongoing challenges.Building upon these advancements,research efforts have increasingly pivoted towards the synthesis of higher-dimensional content,such as video and three-dimensional assets,with recent studies demonstrating significant progress in this burgeoning field.Nevertheless,formidable challenges endure amidst these advancements.Foremost among these are the substantial computational exigencies requisite for training and deploying these sophisticated models,particularly pronounced in the realm of high-dimensional generation such as video synthesis.Additional persistent hurdles include maintaining spatial-temporal consistency across complex scenes and mitigating ethical considerations surrounding bias and the preservation of human creative autonomy.This research underscores the transformative potential and inherent complexities of AI-driven synergy within the creative industries.We posit that future research should be dedicated to the synergistic fusion of diffusion and autoregressive models,the integration of multimodal inputs,and the balanced consideration of ethical implications,particularly regarding bias and the preservation of human creative autonomy,thereby establishing a robust foundation for the advancement of anime creation and the broader landscape of AI-driven content generation.展开更多
The stacking of multiple defect-rich grain boundaries(GBs)along the long transportation path(~3μm)of charge carriers in printable mesoscopic perovskite solar cells(p-MPSCs)impedes their power conversion efficiency(PC...The stacking of multiple defect-rich grain boundaries(GBs)along the long transportation path(~3μm)of charge carriers in printable mesoscopic perovskite solar cells(p-MPSCs)impedes their power conversion efficiency(PCE).Organic Lewis bases are widely utilized for defect passivation at GBs,but how their passivation efficiency affects energy loss remains unclear.Here we employed triphenylphosphine(TPP)and triphenylphosphine oxide(TPPO)as the model passivators in p-MPSCs.TPPO has a more negatively charged center than TPP,which enables its stronger coordination with one of the most common and detrimental defects at the GBs—undercoordinated lead.When added into the perovskite with the same ratio,TPPO passivates defects more significantly and thus less TPPO remaining inactive compared with TPP.Inactive organic passivators accumulated at the GBs could impose barriers to charge carrier transportation.Indeed,TPPO improves the device performance more significantly with a champion PCE of 20.54%achieved.Besides,the TPPO devices demonstrate excellent stability with 95%of initial PCE remaining after 600 h of maximum power point tracking at(55±5)℃.展开更多
Sodium-ion batteries have gradually been commercialized due to their wide range of material sources and low cost.However,there are few studies focusing on the commercial sodium-ion battery safety,especially the relati...Sodium-ion batteries have gradually been commercialized due to their wide range of material sources and low cost.However,there are few studies focusing on the commercial sodium-ion battery safety,especially the relationship between heat and gas generation is unclear.This work conducts the thermal runaway(TR)experiments of commercial 18650 sodium-ion batteries with different states of charge(SOCs)under adiabatic accelerated rate calorimetry and localized overheating.The results show that heat generation values of 50% and 100%SOC batteries during TR are 175.2 and 328.2 J g^(-1),respectively.Whereas,0%SOC batteries do not trigger TR.Moreover,the reaction sources and pathways of gas generation during TR are critically sorted out.Finally,two important conclusions are obtained.(i)During the five stages of TR,the heat generation from the safe venting to the triggering of TR stage is the highest in 50%SOC batteries,accounting for 62.5% of the total heat generation.However,for 100%SOC batteries,the heat generation from triggering TR to maximum temperature stage has the largest proportion during TR,at 57%.The 50%SOC batteries present characteristic of slow heat generation,while the 100%SOC batteries show characteristics of accelerated heat generation.(ii)Based on dimensionless analysis,the heat/gas generation ratios of 50% and 100%SOC batteries are 0.262 and 0.028,respectively.The gas generation behavior occur earlier than heat generation behavior during the whole process of TR of sodium-ion batteries.This study provides a direction for the development of high-safety sodium-ion batteries and thermal runaway suppression technology.展开更多
Conventional approaches for obtaining the second and third harmonics typically employ several nonlinear crystals to generate them,which is restricted in application due to the complexity of the optical path and the bu...Conventional approaches for obtaining the second and third harmonics typically employ several nonlinear crystals to generate them,which is restricted in application due to the complexity of the optical path and the bulkiness of the device.In this work,we present a comprehensive theoretical and numerical investigation of the simultaneous generation and competition between the second harmonic waves(SHW)and the third harmonic waves(THW)in a single nonlinear crystal.Through analyzing both small-signal and large-signal regimes,we reveal the complex coupling mechanisms between SHW and THW generation processes.Using periodically poled lithium niobate as an example,we demonstrate that the relative conversion efficiencies between SHW and THW can be freely adjusted by controlling the input fundamental wave power.This work provides new insights for designing efficient frequency converters capable of generating both SHW and THW outputs with controllable intensity ratios.展开更多
Artificial intelligence(AI)assisted ultrasound report generation represents a technology that leverages artificial intelligence to convert ultrasound imaging analysis results into structured diagnostic reports.By inte...Artificial intelligence(AI)assisted ultrasound report generation represents a technology that leverages artificial intelligence to convert ultrasound imaging analysis results into structured diagnostic reports.By integrating image recognition and natural language generation models,AI systems can automatically detect and analyze lesions or abnormalities in ultrasound images,generating textual descriptions of diagnostic conclusions(e.g.,fatty liver,liver fibrosis,automated BIRADS grading of breast lesions),imaging findings,and clinical recommendations to form comprehensive reports.This technology enhances the efficiency and accuracy of imaging diagnosis,reduces physicians’workloads,ensures report standardization and consistency,and provides robust support for clinical decisionmaking.Current state-of-the-art algorithms for automated ultrasound report generation primarily rely on vision-language models,which harness the generalization capabilities of large language models and large vision models through multimodal(language+vision)feature alignment.However,existing approaches inadequately address challenges such as numerical measurement generation,effective utilization of report templates,incorporation of historical reports,learning text-image correlations,and overfitting under limited data conditions.This paper aims to introduce the current state of research on ultrasound report generation,the existing issues,and to provide some thoughts for future research.展开更多
Strained germanium hole spin qubits are promising for quantum computing,but the devices hosting these qubits face challenges from high interface trap density,which originates from the naturally oxidized surface of the...Strained germanium hole spin qubits are promising for quantum computing,but the devices hosting these qubits face challenges from high interface trap density,which originates from the naturally oxidized surface of the wafer.These traps can degrade the device stability and cause an excessively high threshold voltage.Surface passivation is regarded as an effective method to mitigate these impacts.In this study,we perform low-thermal-budget chemical passivation using the nitric acid oxidation of silicon method on the surface of strained germanium devices and investigate the impact of passivation on the device stability.The results demonstrate that surface passivation effectively reduces the interface defect density.This not only improves the stability of the device's threshold voltage but also enhances its long-term static stability.Furthermore,we construct a band diagram of hole surface tunneling at the static operating point to gain a deeper understanding of the physical mechanism through which passivation affects the device stability.This study provides valuable insights for future optimization of strained Ge-based quantum devices and advances our understanding of how interface states affect device stability.展开更多
The coal-bearing source rocks in the Jurassic Shuixigou Group have received widespread attention as the primary source rocks in the Turpan-Hami Basin of China,but the hydrocarbon generation potential and process of th...The coal-bearing source rocks in the Jurassic Shuixigou Group have received widespread attention as the primary source rocks in the Turpan-Hami Basin of China,but the hydrocarbon generation potential and process of the mudstone in the Shuixigou Group,especially the mudstone at the top of the Sangonghe Formation,are unclear.Taking the source rocks of the Xishanyao Formation and the Sangonghe Formation as objectives,this study conducted rock pyrolysis and gold tube simulation experiment to investigate their hydrocarbon generation characteristics and differences.Our results indicate that the source rocks of the Xishanyao Formation include mudstone,carbonaceous mudstone and coal,and the quality of the source rocks is highly heterogeneous;the source rocks of the Sangonghe Formation are mainly composed of mudstone,and it is a good gas source rock.Simulation experiments found that the activation energy required for the generation of gaseous hydrocarbons by the mudstone of the Sangonghe Formation is lower than that by the mudstone of the Xishanyao Formation.The hydrocarbon generation process can be divided into three stages for both formations,but the gas generation potential of the Xishanyao Formation mudstone is higher than that of the Sangonghe Formation mudstone.A large amount of hydrocarbon was generated by the mudstone of the Xishanyao Formation when entering late thermal evolution,of which methane is dominant,mainly from the demethylation reaction of mature kerogen.On the other hand,a large amount of hydrocarbon was generated by the mudstone of the Sangonghe Formation in the early stage of thermal evolution,of which light hydrocarbon and wet gas are dominant,mainly from the early cracking stage of kerogen.This difference may be attributed to the structure of kerogen.The mudstone of the Xishanyao Formation is conducive to the formation of highly mature dry gas reservoirs,while the mudstone of the Sangonghe Formation is conducive to the formation of low maturity condensate gas and volatile oil reservoirs.The research result provides a scientific basis for the comparison of oil and gas sources and the evaluation of oil and gas resources in the Turpan-Hami Basin.展开更多
The precipitation behavior,corrosion,and passivation performance of solutionized and severely sensitized SAF 2507 super-duplex stainless steel subjected to a temperature of 900℃for 10 h are investigated in a twofold ...The precipitation behavior,corrosion,and passivation performance of solutionized and severely sensitized SAF 2507 super-duplex stainless steel subjected to a temperature of 900℃for 10 h are investigated in a twofold concentrated seawater at 60℃.The sensitized alloy exhibits 66.1%γphases and 33.9%σphases,and the originalαphases have completely decomposed through eutectoid transformation,resulting in a microstructure characterized by coarse blockyσ/γ2 aggregates.High defect densities and an increased amount of oxyhydroxides and hydroxides are present in the passive film on the sensitized alloy,thereby enhancing n-type semiconducting character.The inferior performance of the passive film on the sensitized alloy is ascribed to the increased potential drop across the film/solution interface,the high defect densities,and the pronounced n-type character of the passive film resulting from the variations in its constituents.The precipitation ofσphase during sensitization significantly increases intergranular corrosion susceptibility and decreases critical pitting temperature,breakdown potential,and polarization resistance in hot concentrated seawater.展开更多
Highly crystalline perovskite absorbers with low defect-state densities minimizing nonradiative recombination losses are a critical prerequisite for fabricating state-of-the-art photovoltaics.Here,we use a tartaric ac...Highly crystalline perovskite absorbers with low defect-state densities minimizing nonradiative recombination losses are a critical prerequisite for fabricating state-of-the-art photovoltaics.Here,we use a tartaric acid(TA)molecule with two carboxyl and two hydroxyl groups as an additive to improve the performance and stability of the device simultaneously.The strong carboxyl-Pb2+coordination slows nucleation kinetics and passivates Pb-related traps,whereas hydroxyl-I-hydrogen bonding can modulate grain growth and stabilize the lattice structure,collectively enabling low-defect-density and high-quality perovskite films.Besides,we also conducted quantitively loss analysis and confirmed that the TA addition effectively reduces trap-assisted non-radiative recombination.Consequently,the champion efficiency of the n-i-p structure is up to 24.77% with outstanding operational and humidity stability.Remarkably,in the triple-cation perovskite system,the incorporation of the TA additive similarly enabled the fabrication of high-quality films,ultimately yielding a p-i-n configuration with a champion efficiency of 26.11%.展开更多
The strong corrosion resistance and corrosion behavior of the FeNiCoCrW_(0.2)Al_(0.1) high-entropy alloy in 3.5 wt%NaCl solution was investigated.In order to explain the Cl−induced degradation of diferent metal oxides...The strong corrosion resistance and corrosion behavior of the FeNiCoCrW_(0.2)Al_(0.1) high-entropy alloy in 3.5 wt%NaCl solution was investigated.In order to explain the Cl−induced degradation of diferent metal oxides on the surface of the passivate film,the energy required for the interaction of the corrosion oxidation products NiO,CoO,Fe_(2)O_(3),and Cr_(2)O_(3) surfaces with Cl−is compared and calculated based on the assumptions of the point defect model and the density functional theory by using the electrochemical impedance spectroscopy and the X-ray photoelectron spectroscopy for the analysis of the monodouble-layer structure and elemental compositions of passivate film in the corrosion process.The combined experimental and simulation results showed that the alloy passivates naturally in air,forming a single passivation layer.The compositional layering of the passivation film in 3.5 wt%NaCl solution occurred with the increase of the contact time with NaCl.A doublelayer passivation with a two-layered combinatorial structure was formed due to the imbalanced depletion of Co and Fe during corrosion,and that the dense outer structure of this high-entropy alloy,which was made up of NiO and Cr_(2)O_(3),provided the predominantly high corrosion resistance.This paper provided a new perspective to study the strong corrosion resistance of FeNiCoCr-based high-entropy alloys.展开更多
Defects at the grain boundaries(GBs)of perovskite film highly restrict both the efficiency and stability of perovskite solar cells(PSCs).Herein,organic small molecules of butanedioic acid(BA)and acetylenedicarboxylic ...Defects at the grain boundaries(GBs)of perovskite film highly restrict both the efficiency and stability of perovskite solar cells(PSCs).Herein,organic small molecules of butanedioic acid(BA)and acetylenedicarboxylic acid(AA),containing two carbonyl(C=O)groups and different core-units,were incorporated into perovskite as additives for PSCs application.Thanks to the strong coordination interaction between C=O group and under-coordinated Pb^(2+),the additives can effectively passivate film defects and regulate the perovskite crystallization,yielding high-quality perovskite films with lower defect densities.More importantly,the additives can efficiently regulate the charge transport behaviors in PSCs.Benefiting from the defects passivation and the regulation of charge carrier dynamics,the BA and AA-treaded PSCs show the power conversion efficiencies of 21.52%and 20.50%,which are higher than that of the control device(19.41%).Besides,the optimal devices exhibit a remarkable enhanced long-term stability and moisture tolerance compared to the pristine devices.Furthermore,the transient absorption spectrum reveals the mechanism of enhanced photovoltaic performances,attributing to the improvement of charge transport capability at the perovskite/Spiro-OMeTAD interfaces.This work affords a promising strategy to improve the efficiency and stability of PSCs through regulating the charge-carrier dynamic process in perovskite film.展开更多
Accurate prediction of the composition of pyrolysis products is the prerequisite for achieving directional regulation of organic-rich shale pyrolysis and conversion products.In this paper,the classical segmented pyrol...Accurate prediction of the composition of pyrolysis products is the prerequisite for achieving directional regulation of organic-rich shale pyrolysis and conversion products.In this paper,the classical segmented pyrolysis kinetics model and a new refined pyrolysis kinetics model were used to forecast the composition distribution of hydrocarbon generation products co-heated by supercritical water and medium and low maturity organic-rich shale.The prediction accuracy of the two reaction kinetics models for the composition of pyrolysis products of organic-rich shale was compared.The reaction path of hydrocarbon generation in centimeter sized organic-rich shale under the action of supercritical water was identified.The results show that the prediction accuracy of the classical segmented pyrolysis kinetics model was poor at the initial stage of the reaction,and gradually increased with increasing time.The prediction error can reach less than 25%when the reaction time was 12 h.The new refined model of reaction kinetics established is better than the classical reaction kinetics model in predicting the product distribution of pyrolysis oil and gas,and its prediction error is less than 14%in this paper.The reaction paths of hydrocarbon generation in centimeter sized organic-rich shale under supercritical water conversion mainly include organic-rich shale directly generates asphaltene and saturated hydrocarbon,asphaltene pyrolysis generates saturated hydrocarbon,aromatic hydrocarbon and resin,saturated hydrocarbon,aromatic hydrocarbon and resin polymerization generates asphaltene,and saturated hydrocarbon,resin and asphaltene generates gas.The reason for the difference of centimeter sized and millimeter sized medium and low maturity organic-rich shales hydrocarbon generation in supercritical water is that the increase of shale size promotes the reaction path of polymerization of saturated hydrocarbon and aromatic hydrocarbon to asphaltene.展开更多
Waveform generation and digitization play essential roles in numerous physics experiments.In traditional distributed systems for large-scale experiments,each frontend node contains an FPGA for data preprocessing,which...Waveform generation and digitization play essential roles in numerous physics experiments.In traditional distributed systems for large-scale experiments,each frontend node contains an FPGA for data preprocessing,which interfaces with various data converters and exchanges data with a backend central processor.However,the streaming readout architecture has become a new paradigm for several experiments benefiting from advancements in data transmission and computing technologies.This paper proposes a scalable distributed waveform generation and digitization system that utilizes fiber optical connections for data transmission between frontend nodes and a central processor.By utilizing transparent transmission on top of the data link layer,the clock and data ports of the converters in the frontend nodes are directly mapped to the FPGA firmware at the backend.This streaming readout architecture reduces the complexity of frontend development and maintains the data conversion in proximity to the detector.Each frontend node uses a local clock for waveform digitization.To translate the timing information of events in each channel into the system clock domain within the backend central processing FPGA,a novel method is proposed and evaluated using a demonstrator system.展开更多
Rice(Oryza sativa L.)plays a pivotal role in global food security,yet its breeding is constrained by its long generation time and seasonality.To enhance rice breeding efficiency and meet future food demands,we have de...Rice(Oryza sativa L.)plays a pivotal role in global food security,yet its breeding is constrained by its long generation time and seasonality.To enhance rice breeding efficiency and meet future food demands,we have developed a vertical hydroponic breeding system integrated with light-emitting diodes(LEDs)light-ing in a closed plant factory(PF),which significantly accelerates rice growth and generation advance-ment.The results show that indica rice can be harvested as early as after 63 days of cultivation,a 50%reduction compared with field cultivation,enabling the annual harvesting of 5-6 generations within the PF.A hyperspectral imaging(HSI)system and attenuated total reflectance infrared(ATR-IR)spec-troscopy were further employed to characterize the chemical composition of the PF-and field-cultivated rice.Metabolomics analysis with ultra-performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS)and gas chromatography-mass spectrometry(GC-MS)revealed that,com-pared with the field-cultivated rice,the PF-cultivated rice exhibited an up-regulation of total phenolic acids along with 68 non-volatile and 19 volatile metabolites,such as isovitexin,succinic acid,and methylillicinone F.Overall,this study reveals the unique metabolic profile of PF-cultivated rice and high-lights the potential of PFs to accelerate the breeding of crops such as rice,offering an innovative agricul-tural strategy to support food security in the face of global population growth and climate change.展开更多
基金supported by the National Natural Science Foundation of China(No.61904073)Spring City Plan-Special Program for Young Talents(No.K202005007)+4 种基金Yunnan Talents Support Plan for Yong Talents(No.XDYC-QNRC-20220482)Yunnan Local Colleges Applied Basic Research Projects(No.202101BA070001-138)Scientific Research Fund of Yunnan Education Department(No.2023Y0883)Frontier Research Team of Kunming University 2023Key Laboratory of Artificial Microstructures in Yunnan Higher Education。
文摘Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.
基金supported by the National Nature Science Foundation of China(Nos.12102259,12202273)the China Postdoctoral Science Foundation(No.2018M642007)。
文摘Insects usually fly by passively rotating wings,which has been applied to the design of flapping-wing Micro-Air Vehicles(MAVs)to reduce mechanical complexity.In this paper,a robotic passive rotating-wing model is designed to investigate wing kinematics and lift generation,which are measured by a high-speed camera and a force transducer,respectively.In addition,flow fields are measured using the Particle Image Velocimetry(PIV).Experimental results demonstrate that passive rotating motion has a coordinative relationship with actively stroking motion.As the stroke amplitude or frequency increases,the rotating amplitude is enlarged.To characterize the active stroking motion,a driving Reynolds number Redrivingis defined,which varies from 68 to 366 in this study.Moving the gravity center of the wing towards trailing ed ge induces the increase of additional torque M,which decreases the wing rotating amplitude and promotes the advance of wing rotation.We find that the timing of wing rotation is gradually delayed and the mean lift coefficient C^(-)_(L)monotonously decreases as Redrivingincreases.By increasing the additional torque M,C^(-)_(L)is slightly improved and approaches to the lift coefficient of a real fruit fly at driving Re approximately equal to 230.The instantaneous lifts combined with the vortical structures further demonstrate that the lift generation associated with wing rotation is mainly attributed to the growth of the LeadingEdge Vortex(LEV)and the passive wake capture mechanism.Passive wake capture is influenced by LEV,reversal stroke motion and wing additional torque together,which can only maintain the lift at a high level for a considerable period.The high-lift generation mechanisms of flapping and passive rotating flight could shed light on the simplified design of MAVs and the improvement of their aerodynamic performance.
基金funding from King Saud University through Researchers Supporting Project number(RSP2024R387),King Saud University,Riyadh,Saudi Arabia.
文摘The emergence of next generation networks(NextG),including 5G and beyond,is reshaping the technological landscape of cellular and mobile networks.These networks are sufficiently scaled to interconnect billions of users and devices.Researchers in academia and industry are focusing on technological advancements to achieve highspeed transmission,cell planning,and latency reduction to facilitate emerging applications such as virtual reality,the metaverse,smart cities,smart health,and autonomous vehicles.NextG continuously improves its network functionality to support these applications.Multiple input multiple output(MIMO)technology offers spectral efficiency,dependability,and overall performance in conjunctionwithNextG.This article proposes a secure channel estimation technique in MIMO topology using a norm-estimation model to provide comprehensive insights into protecting NextG network components against adversarial attacks.The technique aims to create long-lasting and secure NextG networks using this extended approach.The viability of MIMO applications and modern AI-driven methodologies to combat cybersecurity threats are explored in this research.Moreover,the proposed model demonstrates high performance in terms of reliability and accuracy,with a 20%reduction in the MalOut-RealOut-Diff metric compared to existing state-of-the-art techniques.
文摘To investigate the overall performance of reverse energy bypass scramjet,firstly a variable spe⁃cific heat method combined with a chemical balance calculation module for combustion products were used to es⁃tablish a benchmark scramjet performance evaluation model.Based on the test data of typical flying point of Mach 7 with the altitude of 29 km,the reliability of the model was verified.The deviations of parameters such as the to⁃tal pressure loss of combustor between the model and the test data were analyzed.Furtherly,an analytical method for post-combustion magnetohydrodynamic power generation was established;by embedding the above method into the overall performance evaluation model,performance prediction considering the power generation effect was realized.Finally,based on the above model,variety regulations of the inlet and the outlet parameters of the power generation channel and performance parameters including the engine specific impulse and the unit thrust under different enthalpy extraction ratios and load factors were analyzed.It could be concluded that the model can reliably predict the variations of key parameters.As the value of the load factor increases,the value of the conduc⁃tivity required to reach the specified enthalpy extraction ratio first decreases and then increases,which is approxi⁃mately parabolic.In order to reduce the demand for the gas conductivity for MHD power generation,the load fac⁃tor should be around 0.5.When the load factor is 0.4 and the magnetic induction intensity is 2.5 T,if the enthalpy extraction ratio reaches 0.5%,the engine specific impulse performance reduces about 3.58%.
基金supported by the National Nat-ural Science Foundation of China(Nos.12192251,12174185,92163216,and 62288101).
文摘The generation of optical vortices from nonlinear photonic crystals(NPCs)with spatially modulated second-order nonlinearity offers a promising approach to extend the working wavelength and topological charge of vortex beams for various applications.In this work,the second harmonic(SH)optical vortex beams generated from nonlinear fork gratings under Gaussian beam illumination are numerically investigated.The far-field intensity and phase distributions,as well as the orbital angular momentum(OAM)spectra of the SH beams,are analyzed for different structural topological charges and diffraction orders.Results reveal that higher-order diffraction and larger structural topological charges lead to angular interference patterns and non-uniform intensity distributions,deviating from the standard vortex profile.To optimize the SH vortex quality,the effects of the fundamental wave beam waist,crystal thickness,and grating duty cycle are explored.It is shown that increasing the beam waist can effectively suppress diffraction order interference and improve the beam’s quality.This study provides theoretical guidance for enhancing the performance of nonlinear optical devices based on NPCs.
基金financially supported by The Scientific and Technological Research Council of Türkiye(TüBITAK)under Project No.119F185the support of the Interdisciplinary Centre for Mathematical and Computational Modelling at the University of Warsaw(ICM UW)under computational allocation no.g93-1617。
文摘The modification of the perovskite surface using functional additives is one of the most promising strategies to reduce nonradiative recombination and improve the stability of perovskite solar cells(PSCs).In this work,a novel quaternary pyridinium-based halide salt,1-ethyl-4-(methoxycarbonyl)pyridinium iodide(EMCP-I),is introduced as an effective post-treatment molecule to improve the quality of the perovskite film.EMCP-I exhibits dual functionality to passivate both negatively and positively charged defects and improve the film morphology.Furthermore,the treatment fine-tunes energy level alignment between the perovskite layer and the hole transport layer(HTL),facilitating more efficient charge transport.Consequently,EMCP-I-treated devices achieve a remarkable power conversion efficiency(PCE)improvement from 20.5% to 22.6%,driven primarily by an enhanced open-circuit voltage(VOC).Beyond efficiency gains,the treatment significantly enhances the environmental and operational stabilities of solar cells.This work provides a guide for tailoring quaternary pyridinium-based molecules for simultaneous improvement of the efficiency and stability of PSCs.
基金supported by the National Natural Science Foundation of China(Grant No.62202210).
文摘The application of generative artificial intelligence(AI)is bringing about notable changes in anime creation.This paper surveys recent advancements and applications of diffusion and language models in anime generation,focusing on their demonstrated potential to enhance production efficiency through automation and personalization.Despite these benefits,it is crucial to acknowledge the substantial initial computational investments required for training and deploying these models.We conduct an in-depth survey of cutting-edge generative AI technologies,encompassing models such as Stable Diffusion and GPT,and appraise pivotal large-scale datasets alongside quantifiable evaluation metrics.Review of the surveyed literature indicates the achievement of considerable maturity in the capacity of AI models to synthesize high-quality,aesthetically compelling anime visual images from textual prompts,alongside discernible progress in the generation of coherent narratives.However,achieving perfect long-form consistency,mitigating artifacts like flickering in video sequences,and enabling fine-grained artistic control remain critical ongoing challenges.Building upon these advancements,research efforts have increasingly pivoted towards the synthesis of higher-dimensional content,such as video and three-dimensional assets,with recent studies demonstrating significant progress in this burgeoning field.Nevertheless,formidable challenges endure amidst these advancements.Foremost among these are the substantial computational exigencies requisite for training and deploying these sophisticated models,particularly pronounced in the realm of high-dimensional generation such as video synthesis.Additional persistent hurdles include maintaining spatial-temporal consistency across complex scenes and mitigating ethical considerations surrounding bias and the preservation of human creative autonomy.This research underscores the transformative potential and inherent complexities of AI-driven synergy within the creative industries.We posit that future research should be dedicated to the synergistic fusion of diffusion and autoregressive models,the integration of multimodal inputs,and the balanced consideration of ethical implications,particularly regarding bias and the preservation of human creative autonomy,thereby establishing a robust foundation for the advancement of anime creation and the broader landscape of AI-driven content generation.
基金financial support from the National Natural Science Foundation of China(Grant numbers 22439001,52172198,51902117)the China Postdoctoral Science Foundation(Grant number BX20240123)the Fundamental Research Funds for the Central Universities(Grant number HUST:2024JYCXJJ043)。
文摘The stacking of multiple defect-rich grain boundaries(GBs)along the long transportation path(~3μm)of charge carriers in printable mesoscopic perovskite solar cells(p-MPSCs)impedes their power conversion efficiency(PCE).Organic Lewis bases are widely utilized for defect passivation at GBs,but how their passivation efficiency affects energy loss remains unclear.Here we employed triphenylphosphine(TPP)and triphenylphosphine oxide(TPPO)as the model passivators in p-MPSCs.TPPO has a more negatively charged center than TPP,which enables its stronger coordination with one of the most common and detrimental defects at the GBs—undercoordinated lead.When added into the perovskite with the same ratio,TPPO passivates defects more significantly and thus less TPPO remaining inactive compared with TPP.Inactive organic passivators accumulated at the GBs could impose barriers to charge carrier transportation.Indeed,TPPO improves the device performance more significantly with a champion PCE of 20.54%achieved.Besides,the TPPO devices demonstrate excellent stability with 95%of initial PCE remaining after 600 h of maximum power point tracking at(55±5)℃.
基金supported by the National Key R&D Program of China(No.2024YFE0209200)National Natural Science Foundation of China(No.52404259)+1 种基金Postgraduate Academic Innovation Project of Anhui Province(No.2023xscx009)supported by Youth Innovation Promotion Association CAS(No.Y201768)。
文摘Sodium-ion batteries have gradually been commercialized due to their wide range of material sources and low cost.However,there are few studies focusing on the commercial sodium-ion battery safety,especially the relationship between heat and gas generation is unclear.This work conducts the thermal runaway(TR)experiments of commercial 18650 sodium-ion batteries with different states of charge(SOCs)under adiabatic accelerated rate calorimetry and localized overheating.The results show that heat generation values of 50% and 100%SOC batteries during TR are 175.2 and 328.2 J g^(-1),respectively.Whereas,0%SOC batteries do not trigger TR.Moreover,the reaction sources and pathways of gas generation during TR are critically sorted out.Finally,two important conclusions are obtained.(i)During the five stages of TR,the heat generation from the safe venting to the triggering of TR stage is the highest in 50%SOC batteries,accounting for 62.5% of the total heat generation.However,for 100%SOC batteries,the heat generation from triggering TR to maximum temperature stage has the largest proportion during TR,at 57%.The 50%SOC batteries present characteristic of slow heat generation,while the 100%SOC batteries show characteristics of accelerated heat generation.(ii)Based on dimensionless analysis,the heat/gas generation ratios of 50% and 100%SOC batteries are 0.262 and 0.028,respectively.The gas generation behavior occur earlier than heat generation behavior during the whole process of TR of sodium-ion batteries.This study provides a direction for the development of high-safety sodium-ion batteries and thermal runaway suppression technology.
基金supported by the Science and Technology Project of Guangdong Province,China(Grant No.2020B010190001)the National Natural Science Foundation of China(Grant No.12434016)+1 种基金the National Key Research and Development Program of China(Grant No.2023YFA1406900)the Fund of the National Postdoctoral Researcher Program(Grant No.GZB20240785).
文摘Conventional approaches for obtaining the second and third harmonics typically employ several nonlinear crystals to generate them,which is restricted in application due to the complexity of the optical path and the bulkiness of the device.In this work,we present a comprehensive theoretical and numerical investigation of the simultaneous generation and competition between the second harmonic waves(SHW)and the third harmonic waves(THW)in a single nonlinear crystal.Through analyzing both small-signal and large-signal regimes,we reveal the complex coupling mechanisms between SHW and THW generation processes.Using periodically poled lithium niobate as an example,we demonstrate that the relative conversion efficiencies between SHW and THW can be freely adjusted by controlling the input fundamental wave power.This work provides new insights for designing efficient frequency converters capable of generating both SHW and THW outputs with controllable intensity ratios.
文摘Artificial intelligence(AI)assisted ultrasound report generation represents a technology that leverages artificial intelligence to convert ultrasound imaging analysis results into structured diagnostic reports.By integrating image recognition and natural language generation models,AI systems can automatically detect and analyze lesions or abnormalities in ultrasound images,generating textual descriptions of diagnostic conclusions(e.g.,fatty liver,liver fibrosis,automated BIRADS grading of breast lesions),imaging findings,and clinical recommendations to form comprehensive reports.This technology enhances the efficiency and accuracy of imaging diagnosis,reduces physicians’workloads,ensures report standardization and consistency,and provides robust support for clinical decisionmaking.Current state-of-the-art algorithms for automated ultrasound report generation primarily rely on vision-language models,which harness the generalization capabilities of large language models and large vision models through multimodal(language+vision)feature alignment.However,existing approaches inadequately address challenges such as numerical measurement generation,effective utilization of report templates,incorporation of historical reports,learning text-image correlations,and overfitting under limited data conditions.This paper aims to introduce the current state of research on ultrasound report generation,the existing issues,and to provide some thoughts for future research.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.92265113,12034018,12474490,and 62404248)the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0302300)。
文摘Strained germanium hole spin qubits are promising for quantum computing,but the devices hosting these qubits face challenges from high interface trap density,which originates from the naturally oxidized surface of the wafer.These traps can degrade the device stability and cause an excessively high threshold voltage.Surface passivation is regarded as an effective method to mitigate these impacts.In this study,we perform low-thermal-budget chemical passivation using the nitric acid oxidation of silicon method on the surface of strained germanium devices and investigate the impact of passivation on the device stability.The results demonstrate that surface passivation effectively reduces the interface defect density.This not only improves the stability of the device's threshold voltage but also enhances its long-term static stability.Furthermore,we construct a band diagram of hole surface tunneling at the static operating point to gain a deeper understanding of the physical mechanism through which passivation affects the device stability.This study provides valuable insights for future optimization of strained Ge-based quantum devices and advances our understanding of how interface states affect device stability.
基金supported by the China Petroleum Science and Technology Major Project(No.2023ZZ18-03).
文摘The coal-bearing source rocks in the Jurassic Shuixigou Group have received widespread attention as the primary source rocks in the Turpan-Hami Basin of China,but the hydrocarbon generation potential and process of the mudstone in the Shuixigou Group,especially the mudstone at the top of the Sangonghe Formation,are unclear.Taking the source rocks of the Xishanyao Formation and the Sangonghe Formation as objectives,this study conducted rock pyrolysis and gold tube simulation experiment to investigate their hydrocarbon generation characteristics and differences.Our results indicate that the source rocks of the Xishanyao Formation include mudstone,carbonaceous mudstone and coal,and the quality of the source rocks is highly heterogeneous;the source rocks of the Sangonghe Formation are mainly composed of mudstone,and it is a good gas source rock.Simulation experiments found that the activation energy required for the generation of gaseous hydrocarbons by the mudstone of the Sangonghe Formation is lower than that by the mudstone of the Xishanyao Formation.The hydrocarbon generation process can be divided into three stages for both formations,but the gas generation potential of the Xishanyao Formation mudstone is higher than that of the Sangonghe Formation mudstone.A large amount of hydrocarbon was generated by the mudstone of the Xishanyao Formation when entering late thermal evolution,of which methane is dominant,mainly from the demethylation reaction of mature kerogen.On the other hand,a large amount of hydrocarbon was generated by the mudstone of the Sangonghe Formation in the early stage of thermal evolution,of which light hydrocarbon and wet gas are dominant,mainly from the early cracking stage of kerogen.This difference may be attributed to the structure of kerogen.The mudstone of the Xishanyao Formation is conducive to the formation of highly mature dry gas reservoirs,while the mudstone of the Sangonghe Formation is conducive to the formation of low maturity condensate gas and volatile oil reservoirs.The research result provides a scientific basis for the comparison of oil and gas sources and the evaluation of oil and gas resources in the Turpan-Hami Basin.
基金the financial support of the National Natural Science Foundation of China(Nos.52375339 and 52305399)the Basic and Applied Basic Research Program of Guangdong Province(No.2021A1515110729).
文摘The precipitation behavior,corrosion,and passivation performance of solutionized and severely sensitized SAF 2507 super-duplex stainless steel subjected to a temperature of 900℃for 10 h are investigated in a twofold concentrated seawater at 60℃.The sensitized alloy exhibits 66.1%γphases and 33.9%σphases,and the originalαphases have completely decomposed through eutectoid transformation,resulting in a microstructure characterized by coarse blockyσ/γ2 aggregates.High defect densities and an increased amount of oxyhydroxides and hydroxides are present in the passive film on the sensitized alloy,thereby enhancing n-type semiconducting character.The inferior performance of the passive film on the sensitized alloy is ascribed to the increased potential drop across the film/solution interface,the high defect densities,and the pronounced n-type character of the passive film resulting from the variations in its constituents.The precipitation ofσphase during sensitization significantly increases intergranular corrosion susceptibility and decreases critical pitting temperature,breakdown potential,and polarization resistance in hot concentrated seawater.
基金funding support from the National Key Research and Development Program of China(2022YFE0137400)the National Natural Science Foundation of China(62274040)+3 种基金funding support from the National Natural Science Foundation of China(62304046)the National Key Research and Development Program of China(2022YFB2802802)the Key Laboratory of Rare Earths,Ganjiang Innovation Academy,Chinese Academy of Sciencessupport from the Shanghai Science and Technology Innovation Action Plan 2023 Special Project for Supporting Carbon Peak Carbon Neutrality Project(23DZ1200400)。
文摘Highly crystalline perovskite absorbers with low defect-state densities minimizing nonradiative recombination losses are a critical prerequisite for fabricating state-of-the-art photovoltaics.Here,we use a tartaric acid(TA)molecule with two carboxyl and two hydroxyl groups as an additive to improve the performance and stability of the device simultaneously.The strong carboxyl-Pb2+coordination slows nucleation kinetics and passivates Pb-related traps,whereas hydroxyl-I-hydrogen bonding can modulate grain growth and stabilize the lattice structure,collectively enabling low-defect-density and high-quality perovskite films.Besides,we also conducted quantitively loss analysis and confirmed that the TA addition effectively reduces trap-assisted non-radiative recombination.Consequently,the champion efficiency of the n-i-p structure is up to 24.77% with outstanding operational and humidity stability.Remarkably,in the triple-cation perovskite system,the incorporation of the TA additive similarly enabled the fabrication of high-quality films,ultimately yielding a p-i-n configuration with a champion efficiency of 26.11%.
基金supported by the Natural Science Foundation of Shanghai(No.20ZR1424000)the National Natural Science Foundation of China(No.52305214)the Sichuan Science and Technology Program(No.2023YFSY0004).
文摘The strong corrosion resistance and corrosion behavior of the FeNiCoCrW_(0.2)Al_(0.1) high-entropy alloy in 3.5 wt%NaCl solution was investigated.In order to explain the Cl−induced degradation of diferent metal oxides on the surface of the passivate film,the energy required for the interaction of the corrosion oxidation products NiO,CoO,Fe_(2)O_(3),and Cr_(2)O_(3) surfaces with Cl−is compared and calculated based on the assumptions of the point defect model and the density functional theory by using the electrochemical impedance spectroscopy and the X-ray photoelectron spectroscopy for the analysis of the monodouble-layer structure and elemental compositions of passivate film in the corrosion process.The combined experimental and simulation results showed that the alloy passivates naturally in air,forming a single passivation layer.The compositional layering of the passivation film in 3.5 wt%NaCl solution occurred with the increase of the contact time with NaCl.A doublelayer passivation with a two-layered combinatorial structure was formed due to the imbalanced depletion of Co and Fe during corrosion,and that the dense outer structure of this high-entropy alloy,which was made up of NiO and Cr_(2)O_(3),provided the predominantly high corrosion resistance.This paper provided a new perspective to study the strong corrosion resistance of FeNiCoCr-based high-entropy alloys.
基金National Natural Science Foundation of China(No.22065038)High-Level Talents Introduction in Yunnan Province(No.C619300A010)+3 种基金the Fund for Excellent Young Scholars of Yunnan(No.202001AW070008)Spring City Plan:the Highlevel Talent Promotion and Training Project of Kunming(No.2022SCP005)for financial supportthe support from the Postdoctoral Research Foundation of Yunnan University(No.W8223004)the Postdoctoral Foundation of Department of Human Resources and Social Security of Yunnan Province(No.C615300504046)。
文摘Defects at the grain boundaries(GBs)of perovskite film highly restrict both the efficiency and stability of perovskite solar cells(PSCs).Herein,organic small molecules of butanedioic acid(BA)and acetylenedicarboxylic acid(AA),containing two carbonyl(C=O)groups and different core-units,were incorporated into perovskite as additives for PSCs application.Thanks to the strong coordination interaction between C=O group and under-coordinated Pb^(2+),the additives can effectively passivate film defects and regulate the perovskite crystallization,yielding high-quality perovskite films with lower defect densities.More importantly,the additives can efficiently regulate the charge transport behaviors in PSCs.Benefiting from the defects passivation and the regulation of charge carrier dynamics,the BA and AA-treaded PSCs show the power conversion efficiencies of 21.52%and 20.50%,which are higher than that of the control device(19.41%).Besides,the optimal devices exhibit a remarkable enhanced long-term stability and moisture tolerance compared to the pristine devices.Furthermore,the transient absorption spectrum reveals the mechanism of enhanced photovoltaic performances,attributing to the improvement of charge transport capability at the perovskite/Spiro-OMeTAD interfaces.This work affords a promising strategy to improve the efficiency and stability of PSCs through regulating the charge-carrier dynamic process in perovskite film.
基金support by the Basic Science Center Program of the Ordered Energy Conversion of the National Nature Science Foundation of China(NO.52488201)is gratefully acknowledged.
文摘Accurate prediction of the composition of pyrolysis products is the prerequisite for achieving directional regulation of organic-rich shale pyrolysis and conversion products.In this paper,the classical segmented pyrolysis kinetics model and a new refined pyrolysis kinetics model were used to forecast the composition distribution of hydrocarbon generation products co-heated by supercritical water and medium and low maturity organic-rich shale.The prediction accuracy of the two reaction kinetics models for the composition of pyrolysis products of organic-rich shale was compared.The reaction path of hydrocarbon generation in centimeter sized organic-rich shale under the action of supercritical water was identified.The results show that the prediction accuracy of the classical segmented pyrolysis kinetics model was poor at the initial stage of the reaction,and gradually increased with increasing time.The prediction error can reach less than 25%when the reaction time was 12 h.The new refined model of reaction kinetics established is better than the classical reaction kinetics model in predicting the product distribution of pyrolysis oil and gas,and its prediction error is less than 14%in this paper.The reaction paths of hydrocarbon generation in centimeter sized organic-rich shale under supercritical water conversion mainly include organic-rich shale directly generates asphaltene and saturated hydrocarbon,asphaltene pyrolysis generates saturated hydrocarbon,aromatic hydrocarbon and resin,saturated hydrocarbon,aromatic hydrocarbon and resin polymerization generates asphaltene,and saturated hydrocarbon,resin and asphaltene generates gas.The reason for the difference of centimeter sized and millimeter sized medium and low maturity organic-rich shales hydrocarbon generation in supercritical water is that the increase of shale size promotes the reaction path of polymerization of saturated hydrocarbon and aromatic hydrocarbon to asphaltene.
基金supported by the National Key Research and Development Program of China(No.2022YFA1604703)the National Natural Science Foundation of China(No.12375189)the National Key Research and Development Program of China(No.2021YFA1601300)。
文摘Waveform generation and digitization play essential roles in numerous physics experiments.In traditional distributed systems for large-scale experiments,each frontend node contains an FPGA for data preprocessing,which interfaces with various data converters and exchanges data with a backend central processor.However,the streaming readout architecture has become a new paradigm for several experiments benefiting from advancements in data transmission and computing technologies.This paper proposes a scalable distributed waveform generation and digitization system that utilizes fiber optical connections for data transmission between frontend nodes and a central processor.By utilizing transparent transmission on top of the data link layer,the clock and data ports of the converters in the frontend nodes are directly mapped to the FPGA firmware at the backend.This streaming readout architecture reduces the complexity of frontend development and maintains the data conversion in proximity to the detector.Each frontend node uses a local clock for waveform digitization.To translate the timing information of events in each channel into the system clock domain within the backend central processing FPGA,a novel method is proposed and evaluated using a demonstrator system.
基金supported by the National Key Research and Development Program(2023YFF1001500)the Local Financial Funds of National Agricultural Science and Technology Center,Chengdu(NASC2022KR02,NASC2023TD08,NASC2021ST08,NASC2021PC04,NASC2022KR07,NASC2022KR06,and NASC2023ST04)+2 种基金the Agricultural Science and Technology Innova-tion Program(ASTIP-34-IUA-01,ASTIP-34-IUA-02,ASTIP-IUA-2023003,and ASTIP2024-34-IUA-09)the Central Public-interest Scientific Institution Basal Research Fund(Y2023YJ07 and SZ202403)the Sichuan Science and Technology Program(2023YFN003,2024NSFC1261,2023YFQ0100,and 2023ZYD0089).
文摘Rice(Oryza sativa L.)plays a pivotal role in global food security,yet its breeding is constrained by its long generation time and seasonality.To enhance rice breeding efficiency and meet future food demands,we have developed a vertical hydroponic breeding system integrated with light-emitting diodes(LEDs)light-ing in a closed plant factory(PF),which significantly accelerates rice growth and generation advance-ment.The results show that indica rice can be harvested as early as after 63 days of cultivation,a 50%reduction compared with field cultivation,enabling the annual harvesting of 5-6 generations within the PF.A hyperspectral imaging(HSI)system and attenuated total reflectance infrared(ATR-IR)spec-troscopy were further employed to characterize the chemical composition of the PF-and field-cultivated rice.Metabolomics analysis with ultra-performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS)and gas chromatography-mass spectrometry(GC-MS)revealed that,com-pared with the field-cultivated rice,the PF-cultivated rice exhibited an up-regulation of total phenolic acids along with 68 non-volatile and 19 volatile metabolites,such as isovitexin,succinic acid,and methylillicinone F.Overall,this study reveals the unique metabolic profile of PF-cultivated rice and high-lights the potential of PFs to accelerate the breeding of crops such as rice,offering an innovative agricul-tural strategy to support food security in the face of global population growth and climate change.
