Tooth modification technique is widely used in gear industry to improve the meshing performance of gearings. However, few of the present studies on tooth modification considers the influence of inevitable random error...Tooth modification technique is widely used in gear industry to improve the meshing performance of gearings. However, few of the present studies on tooth modification considers the influence of inevitable random errors on gear modification effects. In order to investigate the uncertainties of tooth modification amount variations on system＇s dynamic behaviors of a helical planetary gears, an analytical dynamic model including tooth modification parameters is proposed to carry out a deterministic analysis on the dynamics of a helical planetary gear. The dynamic meshing forces as well as the dynamic transmission errors of the sun-planet 1 gear pair with and without tooth modifications are computed and compared to show the effectiveness of tooth modifications on gear dynamics enhancement. By using response surface method, a fitted regression model for the dynamic transmission error（DTE） fluctuations is established to quantify the relationship between modification amounts and DTE fluctuations. By shifting the inevitable random errors arousing from manufacturing and installing process to tooth modification amount variations, a statistical tooth modification model is developed and a methodology combining Monte Carlo simulation and response surface method is presented for uncertainty analysis of tooth modifications. The uncertainly analysis reveals that the system＇s dynamic behaviors do not obey the normal distribution rule even though the design variables are normally distributed. In addition, a deterministic modification amount will not definitely achieve an optimal result for both static and dynamic transmission error fluctuation reduction simultaneously.展开更多
The calculation method of sliding ratios for conjugate-curve gear pair, generated based on the theory of conjugate curves,is proposed. The theoretical model of conjugate-curve gear drive is briefly introduced. The gen...The calculation method of sliding ratios for conjugate-curve gear pair, generated based on the theory of conjugate curves,is proposed. The theoretical model of conjugate-curve gear drive is briefly introduced. The general calculation formulas of sliding ratios are developed according to the conjugate curves. The applications to the circular arc gears based on conjugate curves and the novel involute-helix gears are studied. A comparison on the sliding coefficient with the conventional corresponding gear drive is also carried out. The influences of gear parameters such as spiral parameter, gear ratio and modulus on the sliding ratios of gear drive are discussed. Brief description of manufacturing method for conjugate-curve gear pair is given. The research results show that the sliding ratios of gear pair become smaller with the increase of spiral parameter and gear ratio, respectively. And it will be greater with the increase of modulus for the tooth profiles. The meshing characteristics of conjugate-curve gears are further reflected and the optimization design of tooth profiles with high performance may be obtained.展开更多
According to the characteristics of gear fault vibration signals, a methodfor gear fault diagnosis based upon the empirical mode decomposition (EMD) is proposed in thispaper. By using EMD, any complicated signal can b...According to the characteristics of gear fault vibration signals, a methodfor gear fault diagnosis based upon the empirical mode decomposition (EMD) is proposed in thispaper. By using EMD, any complicated signal can be decomposed into a finite and often small numberof intrinsic mode functions (IMFs) , which are based upon the local characteristic time scale of thesignal. Thus, EMD is perfectly suitable for non-stationary signal processing and faultcharacteristics extracting. It is well known that a gear vibration signal consists of a number offrequency family components, each of which is a modulated signal. Thus, we can use EMD to decomposea gear fault vibration signal into a number of IMF components, some of which correspond to thefrequency families, and the others are noises. Therefore, the frequency families can be separatedand the noise can be decreased at the same time. The proposed method has been applied to gear faultdiagnosis. The results show that both the sensitivity and the reliability of this method aresatisfactory.展开更多
According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears...According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears is researched, and computing formulas of power and rotation speed for equivalent gears are deduced. A numerical simulation of contact stress for non-circular gears has also been conducted based on the finite element method. By the comparison of fitting curves, the feasibility of using equivalent gears instead of non-circular gears to calculate the contact stress is testified.展开更多
Workability domain without the onset of flow instability was developed by numerical simulation and response surface method （RSM） for complex-shaped straight spur gear forging. The processing map of AZ31B alloys was ...Workability domain without the onset of flow instability was developed by numerical simulation and response surface method （RSM） for complex-shaped straight spur gear forging. The processing map of AZ31B alloys was calculated from flow stress curves and then integrated with the finite element model to simulate the distribution of flow instability in the straight spur gear undergoing isothermal forging process. Occurrence of flow instability depends on forging temperature, punch velocity and billet reduction. Taking forging temperature and punch velocity as design variables, while billet reduction as response variable, RSM of workability domain was established. Analysis of variance indicates that forging temperature is the most significant factor determining the appearance of flow instability in the forged gear. Flow instability is easier to take place at lower temperatures of 250 and 300 ℃ in the early stage of forging but at higher temperatures of 350 and 400 ℃ in the later stage of forging, which is attributed to different deformation mechanisms and dynamic recrystallization behaviors at different temperatures or deformation levels. Meanwhile, increasing punch velocity further reduces the workability of the forged gear. Four different processing paths were chosen to carry out the gear forging trials. Visual observations and metallographic examinations demonstrate that the developed workability domain contributes to optimization of forging parameters.展开更多
This paper combines the perturbation theory with the boundary element methodfor contact problems of three-dimensional elasticity mechanism to analyse the effect oferrors on the shape of the contact area and pressure d...This paper combines the perturbation theory with the boundary element methodfor contact problems of three-dimensional elasticity mechanism to analyse the effect oferrors on the shape of the contact area and pressure distribution in gear drive through theperturbation of a cubic order geometry,there by greatly bringing down both computationwork volume and cost and providing a powerful tool for engineering study on the effectof errors on structural strength.展开更多
Special transmission 3D model simulation must be based on surface discretization and reconstruction, but special transmission usually has complicated tooth shape and movement, so present software can＇t provide techni...Special transmission 3D model simulation must be based on surface discretization and reconstruction, but special transmission usually has complicated tooth shape and movement, so present software can＇t provide technical support for special transmission 3D model simulation. Currently, theoretical calculation and experimental method are difficult to exactly solve special transmission contact analysis problem. How to reduce calculation and computer memories consume and meet calculation precision is key to resolve special transmission contact analysis problem. According to 3D model simulation and surface reconstruction of quasi ellipsoid gear is difficulty, this paper employes meshless local Petrov-Galerkin （MLPG） method. In order to reduce calculation and computer memories consume, we disperse tooth mesh into finite points--sparseness points cloud or grid mesh, and then we do interpolation reconstruction in some necessary place of the 3D surface model during analysis. Moving least square method （MLSM） is employed for tooth mesh interpolation reconstruction, there are some advantages to do interpolation by means of MLSM, such as high precision, good flexibility and no require of tooth mesh discretization into units. We input the quasi ellipsoid gear reconstruction model into simulation software, we complete tooth meshing simulation. Simulation transmission ratio during meshing period was obtained, compared with theoretical transmission ratio, the result inosculate preferably. The method using curve reconstruction realizes surface reconstruction, reduce simulation calculation enormously, so special gears simulation can be realized by minitype computer. The method provides a novel solution for special transmission 3D model simulation analysis and contact analysis.展开更多
In order to enhance the bearing capacity of non-circular gear pair, the non-circular gear pair with double generating angles is proposed based on the design idea of unsymmetrical gear with double pressure angles. The ...In order to enhance the bearing capacity of non-circular gear pair, the non-circular gear pair with double generating angles is proposed based on the design idea of unsymmetrical gear with double pressure angles. The tooth profile is designed by generating cutting theory, the pure rolling mathematic model that the center line of unsymmetrical rack roll along non-circular pitch curve is built, the digital model of non-circular gear with double generating angles is created through the second development method of CAD software, and then the drive characteristic and tooth strength are analyzed. The results show that the design method for double generating angles non-circular gear proposed in this paper is feasible, which is significant to improve the bearing capacity of non-circular gear pair.展开更多
An error processing method is presented based on optimization theory and microcomputer technique which can be successfully used in the cycloidal gear measurement on three dimensional coordinates measuring machine (CMM...An error processing method is presented based on optimization theory and microcomputer technique which can be successfully used in the cycloidal gear measurement on three dimensional coordinates measuring machine (CMM). In the procedure, the minimum quadratic sum of the normal deviation is used as the object function and the equidistant curve is dealed with instead of the teeth profile. CMM is a high accurate measuring machine which can provide a way to evaluate the accuracy of the cycloidal gear completely.展开更多
A method for precise calculation of tooth root stress of spiral bevel gears is presentedand developed. On the basis of the machine settings analysis, tooth geometry anaysis and loadedtooth contact analysis, by using t...A method for precise calculation of tooth root stress of spiral bevel gears is presentedand developed. On the basis of the machine settings analysis, tooth geometry anaysis and loadedtooth contact analysis, by using the tooth surface distribution load from tooth load analysis, thecalculation model is established and the root stress is calculated by means of finite element meth-od. The method mentioned is verified by a tested gears example.展开更多
Shimmy can reduce the service life of the nose landing gear, affect ride comfort, and even cause fuselage damage leading to aircraft crashes. Taking a light aircraft as the research object, the torsional freedom of la...Shimmy can reduce the service life of the nose landing gear, affect ride comfort, and even cause fuselage damage leading to aircraft crashes. Taking a light aircraft as the research object, the torsional freedom of landing gear around strut axis and lateral deformation of tire are considered. Since the landing gear shimmy is a nonlinear system, a nonlinear mechanical model of the front landing gear shimmy is established. Sobol index method is proposed to analyze the influence of structural parameters on the stability region of the nose landing gear, and Routh-Huritz criterion is used to verify the reliability of the analysis results of Sobol index method. We analyse the effect of torsional stiffness of strut, caster length, rated initial tire inflation pressure, rake angle, and vertical force on the stability region of theront landing gear. And the research shows that the optimization of the torsional stiffness of the strut and the caster length of the nose landing gear should be emphasized, and the influence of vertical force on the stability region of the nose landing gear should be paid attention to.展开更多
This paper employs a multi-parameter multi-step chaos control method, which is built up on the OGY method, to stabilize desirable UPOs of a gear system with elastomeric web as a high-dimensional and non-hyperbolic cha...This paper employs a multi-parameter multi-step chaos control method, which is built up on the OGY method, to stabilize desirable UPOs of a gear system with elastomeric web as a high-dimensional and non-hyperbolic chaotic system, and the analyses are carried out. Three types of relations between components of a certain control parameter combination are defined in a certain control process. Special emphasis is put on the comparison of control efficiencies of the multi-parameter multi-step method and single-parameter multi-step method. The numerical experiments show the ability to switch between different orbits and the method can be a good chaos control alternative since it provides a more effective UPOs stabilization of high-dimensional and non-hyperbolic chaotic systems than the single-parameter chaos control, and according to the relation between components of each parameter combination, the best combination for chaos control in a certain UPO stabilization process are obtained.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51375013)Anhui Provincial Natural Science Foundation of China(Grant No.1208085ME64)
文摘Tooth modification technique is widely used in gear industry to improve the meshing performance of gearings. However, few of the present studies on tooth modification considers the influence of inevitable random errors on gear modification effects. In order to investigate the uncertainties of tooth modification amount variations on system＇s dynamic behaviors of a helical planetary gears, an analytical dynamic model including tooth modification parameters is proposed to carry out a deterministic analysis on the dynamics of a helical planetary gear. The dynamic meshing forces as well as the dynamic transmission errors of the sun-planet 1 gear pair with and without tooth modifications are computed and compared to show the effectiveness of tooth modifications on gear dynamics enhancement. By using response surface method, a fitted regression model for the dynamic transmission error（DTE） fluctuations is established to quantify the relationship between modification amounts and DTE fluctuations. By shifting the inevitable random errors arousing from manufacturing and installing process to tooth modification amount variations, a statistical tooth modification model is developed and a methodology combining Monte Carlo simulation and response surface method is presented for uncertainty analysis of tooth modifications. The uncertainly analysis reveals that the system＇s dynamic behaviors do not obey the normal distribution rule even though the design variables are normally distributed. In addition, a deterministic modification amount will not definitely achieve an optimal result for both static and dynamic transmission error fluctuation reduction simultaneously.
基金Project(2013BAF01B04) supported by the National Key Technology R&D Program during the Twelfth Five-year Plan of ChinaProject(51205425) supported by the National Natural Science Foundation of China
文摘The calculation method of sliding ratios for conjugate-curve gear pair, generated based on the theory of conjugate curves,is proposed. The theoretical model of conjugate-curve gear drive is briefly introduced. The general calculation formulas of sliding ratios are developed according to the conjugate curves. The applications to the circular arc gears based on conjugate curves and the novel involute-helix gears are studied. A comparison on the sliding coefficient with the conventional corresponding gear drive is also carried out. The influences of gear parameters such as spiral parameter, gear ratio and modulus on the sliding ratios of gear drive are discussed. Brief description of manufacturing method for conjugate-curve gear pair is given. The research results show that the sliding ratios of gear pair become smaller with the increase of spiral parameter and gear ratio, respectively. And it will be greater with the increase of modulus for the tooth profiles. The meshing characteristics of conjugate-curve gears are further reflected and the optimization design of tooth profiles with high performance may be obtained.
文摘According to the characteristics of gear fault vibration signals, a methodfor gear fault diagnosis based upon the empirical mode decomposition (EMD) is proposed in thispaper. By using EMD, any complicated signal can be decomposed into a finite and often small numberof intrinsic mode functions (IMFs) , which are based upon the local characteristic time scale of thesignal. Thus, EMD is perfectly suitable for non-stationary signal processing and faultcharacteristics extracting. It is well known that a gear vibration signal consists of a number offrequency family components, each of which is a modulated signal. Thus, we can use EMD to decomposea gear fault vibration signal into a number of IMF components, some of which correspond to thefrequency families, and the others are noises. Therefore, the frequency families can be separatedand the noise can be decreased at the same time. The proposed method has been applied to gear faultdiagnosis. The results show that both the sensitivity and the reliability of this method aresatisfactory.
文摘According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears is researched, and computing formulas of power and rotation speed for equivalent gears are deduced. A numerical simulation of contact stress for non-circular gears has also been conducted based on the finite element method. By the comparison of fitting curves, the feasibility of using equivalent gears instead of non-circular gears to calculate the contact stress is testified.
基金funding support from the National Natural Science Foundation of China (No. 51675335)the Jiangsu Industry University Research Cooperation Prospective Joint Research Project (No. BY2016069-07)the Yangzhou Industry University Research Cooperation Project (No. YZ 2016241)
文摘Workability domain without the onset of flow instability was developed by numerical simulation and response surface method （RSM） for complex-shaped straight spur gear forging. The processing map of AZ31B alloys was calculated from flow stress curves and then integrated with the finite element model to simulate the distribution of flow instability in the straight spur gear undergoing isothermal forging process. Occurrence of flow instability depends on forging temperature, punch velocity and billet reduction. Taking forging temperature and punch velocity as design variables, while billet reduction as response variable, RSM of workability domain was established. Analysis of variance indicates that forging temperature is the most significant factor determining the appearance of flow instability in the forged gear. Flow instability is easier to take place at lower temperatures of 250 and 300 ℃ in the early stage of forging but at higher temperatures of 350 and 400 ℃ in the later stage of forging, which is attributed to different deformation mechanisms and dynamic recrystallization behaviors at different temperatures or deformation levels. Meanwhile, increasing punch velocity further reduces the workability of the forged gear. Four different processing paths were chosen to carry out the gear forging trials. Visual observations and metallographic examinations demonstrate that the developed workability domain contributes to optimization of forging parameters.
文摘This paper combines the perturbation theory with the boundary element methodfor contact problems of three-dimensional elasticity mechanism to analyse the effect oferrors on the shape of the contact area and pressure distribution in gear drive through theperturbation of a cubic order geometry,there by greatly bringing down both computationwork volume and cost and providing a powerful tool for engineering study on the effectof errors on structural strength.
基金supported by National Natural Science Foundation of China (Grant No. 50905049)Heilongjiang Provincial International Cooperation Project of China (WB06A06)+1 种基金Heilongjiang Provincial Programs for Science and Technology Development of China (GC09A524)Heilongjiang Provincial Postdoctoral Science Foundation of China (LBH-Z09189)
文摘Special transmission 3D model simulation must be based on surface discretization and reconstruction, but special transmission usually has complicated tooth shape and movement, so present software can＇t provide technical support for special transmission 3D model simulation. Currently, theoretical calculation and experimental method are difficult to exactly solve special transmission contact analysis problem. How to reduce calculation and computer memories consume and meet calculation precision is key to resolve special transmission contact analysis problem. According to 3D model simulation and surface reconstruction of quasi ellipsoid gear is difficulty, this paper employes meshless local Petrov-Galerkin （MLPG） method. In order to reduce calculation and computer memories consume, we disperse tooth mesh into finite points--sparseness points cloud or grid mesh, and then we do interpolation reconstruction in some necessary place of the 3D surface model during analysis. Moving least square method （MLSM） is employed for tooth mesh interpolation reconstruction, there are some advantages to do interpolation by means of MLSM, such as high precision, good flexibility and no require of tooth mesh discretization into units. We input the quasi ellipsoid gear reconstruction model into simulation software, we complete tooth meshing simulation. Simulation transmission ratio during meshing period was obtained, compared with theoretical transmission ratio, the result inosculate preferably. The method using curve reconstruction realizes surface reconstruction, reduce simulation calculation enormously, so special gears simulation can be realized by minitype computer. The method provides a novel solution for special transmission 3D model simulation analysis and contact analysis.
基金Supported by National Natural Science Foundation of China(No.51275147)
文摘In order to enhance the bearing capacity of non-circular gear pair, the non-circular gear pair with double generating angles is proposed based on the design idea of unsymmetrical gear with double pressure angles. The tooth profile is designed by generating cutting theory, the pure rolling mathematic model that the center line of unsymmetrical rack roll along non-circular pitch curve is built, the digital model of non-circular gear with double generating angles is created through the second development method of CAD software, and then the drive characteristic and tooth strength are analyzed. The results show that the design method for double generating angles non-circular gear proposed in this paper is feasible, which is significant to improve the bearing capacity of non-circular gear pair.
文摘An error processing method is presented based on optimization theory and microcomputer technique which can be successfully used in the cycloidal gear measurement on three dimensional coordinates measuring machine (CMM). In the procedure, the minimum quadratic sum of the normal deviation is used as the object function and the equidistant curve is dealed with instead of the teeth profile. CMM is a high accurate measuring machine which can provide a way to evaluate the accuracy of the cycloidal gear completely.
文摘A method for precise calculation of tooth root stress of spiral bevel gears is presentedand developed. On the basis of the machine settings analysis, tooth geometry anaysis and loadedtooth contact analysis, by using the tooth surface distribution load from tooth load analysis, thecalculation model is established and the root stress is calculated by means of finite element meth-od. The method mentioned is verified by a tested gears example.
文摘Shimmy can reduce the service life of the nose landing gear, affect ride comfort, and even cause fuselage damage leading to aircraft crashes. Taking a light aircraft as the research object, the torsional freedom of landing gear around strut axis and lateral deformation of tire are considered. Since the landing gear shimmy is a nonlinear system, a nonlinear mechanical model of the front landing gear shimmy is established. Sobol index method is proposed to analyze the influence of structural parameters on the stability region of the nose landing gear, and Routh-Huritz criterion is used to verify the reliability of the analysis results of Sobol index method. We analyse the effect of torsional stiffness of strut, caster length, rated initial tire inflation pressure, rake angle, and vertical force on the stability region of theront landing gear. And the research shows that the optimization of the torsional stiffness of the strut and the caster length of the nose landing gear should be emphasized, and the influence of vertical force on the stability region of the nose landing gear should be paid attention to.
基金Sponsored by the National High Technology Research and Development Program of China(Grant No.2009AA04Z404)
文摘This paper employs a multi-parameter multi-step chaos control method, which is built up on the OGY method, to stabilize desirable UPOs of a gear system with elastomeric web as a high-dimensional and non-hyperbolic chaotic system, and the analyses are carried out. Three types of relations between components of a certain control parameter combination are defined in a certain control process. Special emphasis is put on the comparison of control efficiencies of the multi-parameter multi-step method and single-parameter multi-step method. The numerical experiments show the ability to switch between different orbits and the method can be a good chaos control alternative since it provides a more effective UPOs stabilization of high-dimensional and non-hyperbolic chaotic systems than the single-parameter chaos control, and according to the relation between components of each parameter combination, the best combination for chaos control in a certain UPO stabilization process are obtained.
