A new type of green reactive powder concrete (GRPC) with compressive strength of 200 MPa is prepared by utilizing composite mineral admixtures, natural fine aggregates, and short and fine steel fibers. The quasi-stati...A new type of green reactive powder concrete (GRPC) with compressive strength of 200 MPa is prepared by utilizing composite mineral admixtures, natural fine aggregates, and short and fine steel fibers. The quasi-static mechanical properties (mechanical strength, toughness, fracture energy and interfacial bonding strength) of GRPC specimens, cured in three different types of regimes, are investigated. The experimental results show that the mechanical properties of the C200 GRPC made with the powder binders that is composed of 40% of Portland cement, 25% of ultra fine slag, 25% of ultra fine fly ash and 10% of silica fume are better than the others'. The corresponding compressive strength, flexural strength and fracture energy are more than 200 MPa, and 30 000 J/ m2 respectively. The dynamic tensile behavior of the C200 GRPC is also investigated through the split Hopkinson pressure bar (SHPB) according to the spalling phenomenon. The dynamic testing results demonstrate that strain rate has an important effect on the dynamic tensile behavior of GRPC. With the increase of strain rate, its peak stress and relevant strain increase. The GRPC exhibits an excellent strain ratio stiffening effect under the dynamic tensile load with high strain ratio, resulting in a significant change of the fracture pattern.展开更多
A gas detector glass resistivity plate chamber （GRPC） is proposed for use in the hadron calorimeter （HCAL）. The read-out system is based on a semi-digital system and, therefore, the charge information from GRPC is...A gas detector glass resistivity plate chamber （GRPC） is proposed for use in the hadron calorimeter （HCAL）. The read-out system is based on a semi-digital system and, therefore, the charge information from GRPC is needed. To better understand the charge that comes out from the GRPC, we started from a cosmic ray test to get the charge distribution. We then studied the induced charge distribution on the collection pad. After successfully comparing it with the prototype beam test data at CERN （European Council for Nuclear Research）, the process was finally implanted into the Geant4 based simulation for future study.展开更多
基金Supported by Jiangsu Province Natural Science Foundation Project (No. BK 20065)China National Military Engineering Project (No. A1420060186)
文摘A new type of green reactive powder concrete (GRPC) with compressive strength of 200 MPa is prepared by utilizing composite mineral admixtures, natural fine aggregates, and short and fine steel fibers. The quasi-static mechanical properties (mechanical strength, toughness, fracture energy and interfacial bonding strength) of GRPC specimens, cured in three different types of regimes, are investigated. The experimental results show that the mechanical properties of the C200 GRPC made with the powder binders that is composed of 40% of Portland cement, 25% of ultra fine slag, 25% of ultra fine fly ash and 10% of silica fume are better than the others'. The corresponding compressive strength, flexural strength and fracture energy are more than 200 MPa, and 30 000 J/ m2 respectively. The dynamic tensile behavior of the C200 GRPC is also investigated through the split Hopkinson pressure bar (SHPB) according to the spalling phenomenon. The dynamic testing results demonstrate that strain rate has an important effect on the dynamic tensile behavior of GRPC. With the increase of strain rate, its peak stress and relevant strain increase. The GRPC exhibits an excellent strain ratio stiffening effect under the dynamic tensile load with high strain ratio, resulting in a significant change of the fracture pattern.
基金Supported by Fundamental Research Funds for the Central Universities Southwest University for Nationalities(JB2012092)
文摘A gas detector glass resistivity plate chamber （GRPC） is proposed for use in the hadron calorimeter （HCAL）. The read-out system is based on a semi-digital system and, therefore, the charge information from GRPC is needed. To better understand the charge that comes out from the GRPC, we started from a cosmic ray test to get the charge distribution. We then studied the induced charge distribution on the collection pad. After successfully comparing it with the prototype beam test data at CERN （European Council for Nuclear Research）, the process was finally implanted into the Geant4 based simulation for future study.
