Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.B...Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.展开更多
The urgent demand for renewable energy solutions,propelled by the global energy crisis and environmental concerns,has spurred the creation of innovative materials for solar thermal storage.Photothermal phase change ma...The urgent demand for renewable energy solutions,propelled by the global energy crisis and environmental concerns,has spurred the creation of innovative materials for solar thermal storage.Photothermal phase change materials(PTPCMs)represent a novel type of composite phase change material(PCM)aimed at improving thermal storage efficiency by incorporating photothermal materials into traditional PCMs and encapsulating them within porous structures.Various porous encapsulation materials have been studied,including porous carbon,expanded graphite,and ceramics,but issues like brittleness hinder their practical use.To overcome these limitations,flexible PTPCMs using organic porous polymers—like foams,hydrogels,and porous wood—have emerged,offering high porosity and lightweight characteristics.This review examines recent advancements in the preparation of PTPCMs based on porous polymer supports through techniques like impregnation and in situ polymerization,assessing the impact of different porous polymer materials on PCM performance and clarifying the mechanisms of photothermal conversion and heat storage.Subsequently,the most recent advancements in the applications of porous polymer-based PTPCMs are systematically summarized,and future research challenges and possible solutions are discussed.This review aims to foster awareness about the potential of PTPCMs in promoting environmentally friendly energy practices and catalyzing further research in this promising field.展开更多
Cellulosic materials are attracting increasing research interest because of their abundance,biocompatibility,and biodegradability,making them suitable in multiple industrial and medical applications.Functionalization ...Cellulosic materials are attracting increasing research interest because of their abundance,biocompatibility,and biodegradability,making them suitable in multiple industrial and medical applications.Functionalization of cellulose is usually required to improve or expand its properties to meet the requirements of different applications.Cellulose-binding domains(CBDs)found in various proteins have been shown to be powerful tools in the functionalization of cellulose materials.In this review,we firstly introduce the structural characteristics of commonly used CBDs belonging to carbohydrate-binding module families 1,2 and 3.Then,we summarize four main kinds of methodologies for employing CBDs to modify cellulosic materials(i.e.,CBD only,genetic fusion,non-covalent linkage and covalent linkage).Via different approaches,CBDs have been used to improve the material properties of cellulose,immobilize enzymes for biocatalysis,and design various detection tools.To achieve industrial applications,researches for lowering the production cost of CBDs,improving their performance(e.g.,stability),and expanding their application scenarios are still in need.展开更多
SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+...SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.展开更多
Fe-Mo functionally graded materials(FGMs)with different composition-change rates from 100%304 stainless steel to 100%Mo along the composition gradient direction were prepared by electron beam-directed energy depositio...Fe-Mo functionally graded materials(FGMs)with different composition-change rates from 100%304 stainless steel to 100%Mo along the composition gradient direction were prepared by electron beam-directed energy deposition(EB-DED)technique,including three samples with composition mutation of 100%,composition change rate of 10%and 30%.Results show that the composition-change rate significantly affects the microstructure and mechanical properties of the samples.In the sample with abrupt change of composition,the sharp shift in composition between 304 stainless steel and Mo leads to a great difference in the microstructure and hardness near the interface between the two materials.With the increase in the number of gradient layers,the composition changes continuously along the direction of deposition height,and the microstructure morphology shows a smooth transition from 304 stainless steel to Mo,which is gradually transformed from columnar crystal to dendritic crystal.Elements Fe,Mo,and other major elements transform linearly along the gradient direction,with sufficient interlayer diffusion between the deposited layers,leading to good metallurgical bonding.The smaller the change in composition gradient,the greater the microhardness value along the deposition direction.When the composition gradient is 10%,the gradient layer exhibits higher hardness(940 HV)and excellent resistance to surface abrasion,and the overall compressive properties of the samples are better,with the compressive fracture stress in the top region reaching 750.05±14 MPa.展开更多
With the growing importance of wearable and portable electronics in modern society and industry,researchers from all over the world have reported on advances in energy harvesting and self-powered sensing technologies....With the growing importance of wearable and portable electronics in modern society and industry,researchers from all over the world have reported on advances in energy harvesting and self-powered sensing technologies.The current review discusses recent developments in triboelectric platforms from a manufacturing perspective,including material,design,application,and industrialization.Manufacturing is an essential component of both industry and technology.The use of a proper manufacturing process enables cutting-edge technology in a lab-scale stage to progress to commercialization and popularization with scalability,availability,commercial advantage,and consistent quality.Furthermore,much literature has emphasized that the most powerful advantage of the triboelectric platform is its wide range of available materials and simple working mechanism,both of which are important characteristics in manufacturing engineering.As a result,different manufacturing processes can be implemented as needed.Because the practical process can have a synergetic effect on the fundamental development,resulting in the growth of both,the development of the triboelectric platform from the standpoint of manufacturing engineering can be further advanced.However,research into the development of a productive manufacturing process is still in its early stages in the field of triboelectric platforms.This review looks at the various manufacturing technologies used in previous studies and discusses the potential benefits of the appropriate process for triboelectric platforms.Given its unique strength,which includes a diverse material selection and a simple working mechanism,the triboelectric platform can use a variety of manufacturing technologies and the process can be optimized as needed.Numerous research groups have clearly demonstrated the triboelectric platform's advantages.As a result,using appropriate manufacturing processes can accelerate the technological advancement of triboelectric platforms in a variety of research and industrial fields by allowing them to move beyond the lab-scale fabrication stage.展开更多
The rapid development of portable electronics,wearable technologies,and healthcare monitoring systems necessitates the innovation of flexible energy storage systems.Considering environmental pollution and the depletio...The rapid development of portable electronics,wearable technologies,and healthcare monitoring systems necessitates the innovation of flexible energy storage systems.Considering environmental pollution and the depletion of fossil resources,the utilization of renewable resources to engineer advanced flexible materials has become especially crucial.Cellulose,the most abundant natural polymer,has emerged as a promising precursor for advanced functional materials due to its unique structure and properties.Typically,the easy processability,tunable chemical structure,self-assembly behavior,mechanical strength,and reinforcing capability enable its utilization as binder,substrate,hybrid electrode,separator,and electrolyte reservoir for flexible energy storage devices.This review comprehensively summarizes the design,fabrication,and mechanical and electrochemical performances of cellulose-based materials.The structure and unique properties of cellulose are first briefly introduced.Then,the construction of cellulose-based materials in the forms of 1D fibers/filaments,2D films/membranes,3D hydrogels and aerogels is discussed,and the merits of cellulose in these materials are emphasized.After that,the various advanced applications in supercapacitors,lithium-ion batteries,lithium-sulfur batteries,sodium-ion batteries,metal-air batteries,and Zn-ion batteries are presented in detail.Finally,an outlook of the potential challenges and future perspectives in advanced cellulose-based materials for flexible energy storage systems is discussed.展开更多
Mechanical loading constitutes a fundamental determinant in the process of bone remodeling.This modeling encompasses the incorporation of mechanical stimuli,the involvement of cellular and molecular constituents,as we...Mechanical loading constitutes a fundamental determinant in the process of bone remodeling.This modeling encompasses the incorporation of mechanical stimuli,the involvement of cellular and molecular constituents,as well as the utilization of sophisticated computational methodologies.Such an approach is imperative for forecasting bone behaviour across varying environmental conditions.In the present study,key findings from bone mechanobiology are reviewed,along with the possibility that Functionally Graded Materials(FGM)enhances osseointegration and lowers the stress-shielding effect during bone remodeling and compared to titanium,FGM improves periprosthetic bone remodeling.To summarise some of the most important findings from computational models of bone mechanobiology,explaining how modifications to the mechanical environment affect implant design,growth of bone,and bone response.The impact that changes related to the mechanical environment have on bone response is examined using computational models and methods such as surface microtopography to determine how an implant’s bone density has increased over time.This review focuses on the refinement of advanced simulation frameworks and their synergy with imaging technologies to strengthen model validation,ultimately resulting in better clinical outcomes in the context of bone health treatments.展开更多
Intracellular polymerization is an emerging field,showcasing high diversity and efficiency of chemistry.Motivated by the principles of natural biomolecular synthesis,polymerization within living cells is believed to b...Intracellular polymerization is an emerging field,showcasing high diversity and efficiency of chemistry.Motivated by the principles of natural biomolecular synthesis,polymerization within living cells is believed to be a powerful and versatile tool to modulate cell behavior.In this review,we summarized recent advances and future trends in the field of intracellular polymerization,specifically focusing on covalent and supramolecular polymerization.This discussion comprehensively covers the diverse chemical designs,reaction mechanisms,responsive features,and functional applications.Furthermore,we also clarified the connection between preliminary design of polymer synthesis and their subsequent biological applications.We hope this review will serve as an innovative platform for chemists and biologists to regulate biological functions in practical applications and clinical trials.展开更多
Functionally graded materials (FGMs) are innovative materials distinguished by gradual variations in composition and structure, offering exceptional properties for diverse applications. Poly(ionic liquid)s (PILs), mer...Functionally graded materials (FGMs) are innovative materials distinguished by gradual variations in composition and structure, offering exceptional properties for diverse applications. Poly(ionic liquid)s (PILs), merging the characteristics of polymers and ionic liquids, have emerged as viable options for the development of FGMs given their tunable skeleton, ionic conductivity, and compatibility with various functional materials. This review highlights the latest advancements in the design strategies of FGMs based on porous PILs, focusing on single and multi-gradient structures. Furthermore, we also highlight their emerging applications in molecular recognition, sensing, adsorption, separation, and catalysis. By exploring the interplay between porosity, ionic functionality, and gradient architecture, this review offers perspectives on the prospects of PIL-based FGMs for tackling global challenges in energy, environment, and healthcare.展开更多
Soft robotic manipulators represent a rapidly evolving field characterized by inherent compliance,adaptability,and safe interactions within unstructured environments.Over the past decade(2015-2025),significant advance...Soft robotic manipulators represent a rapidly evolving field characterized by inherent compliance,adaptability,and safe interactions within unstructured environments.Over the past decade(2015-2025),significant advancements have trans-formed their capabilities through novel designs inspired by biological systems,advanced modeling frameworks,sophisti-cated control strategies,and integration into diverse real-world applications.Recent innovations in multifunctional mate-rials and emerging actuation technologies have markedly expanded manipulator performance,reliability,and dexterity.Concurrently,developments in modeling have progressed from simplified geometric methods toward highly accurate physics-based and hybrid data-driven approaches,substantially improving real-time prediction and controllability.Coupled with these developments,adaptive and robust control strategies-including learning-based techniques-have enabled unprec-edented autonomy and precision in challenging application domains such as Minimally Invasive Surgery(MIS),precision agriculture,deep-sea exploration,disaster recovery,and space missions.Despite these remarkable strides,key challenges remain,notably regarding scalability,long-term material durability,robust integrated sensing,and standardized evaluation procedures.This review comprehensively synthesizes recent advances,critically evaluates state-of-the-art methodologies,and systematically identifies existing gaps to provide a clear roadmap and targeted research directions,guiding future developments toward the broader adoption and optimal utilization of soft robotic manipulators.展开更多
This study explores the dynamic contact response of a viscoelastic functionally graded material(FGM)-coated half-plane under a rigid flat punch subjected to a time-harmonic vertical force.The elastic modulus and mass ...This study explores the dynamic contact response of a viscoelastic functionally graded material(FGM)-coated half-plane under a rigid flat punch subjected to a time-harmonic vertical force.The elastic modulus and mass density of the FGM coating vary exponentially along the thickness direction.The FGM coating and the homogeneous half-plane possess viscoelastic properties,which are described by a linearly hysteretic damping model.By applying the asymptotic method and the Fourier integral transform technique,the contact problem is converted into a Cauchy singular integral equation.The effects of excitation frequency,gradient index,damping factor ratio,and punch width on the vertical impedance and dynamic contact stress are analyzed.The results indicate that adjusting the gradient index of the FGM coating can significantly affect the contact stress and vertical impedance.展开更多
Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic producti...Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic production techniques for manufacturing functionally graded materials. Attention is paid to the principles for obtaining graded structure mainly in the metal based functionally graded materials. Several unpublished results obtained by the authors have been discussed briefly. Experimental methods and theoretical analysis for qualitative and quantitative estimation of graded properties have also been presented. The article can be useful for people who work in the field of functionally graded structures and materials, and who need a compact informative review of recent experimental and theoretical activity in this area.展开更多
The effects of the component gradient distribution at interface and the fiber gradient distribution on the strength of cement-based materials were studied. The results show that the flexural strength and compressive s...The effects of the component gradient distribution at interface and the fiber gradient distribution on the strength of cement-based materials were studied. The results show that the flexural strength and compressive strength of the mortar and concrete with interface component and fiber gradient distributions are obviously improved. The strengthes of the fiber gradient distributed mortar and concrete (FGDM/C) are higher than those of fiber homogeneously distributed mortar and concrete (FHDM/C). To obtain the same strength, therefore, a smaller fiber volume content in FGDM/C is needed than that in FHDM/C. The results also show that the component gradient distribution of the concrete can be obtained by means of multi-layer vibrating formation.展开更多
Functionally graded material(FGM)can tailor properties of components such as wear resistance,corrosion resistance,and functionality to enhance the overall performance.The selective laser melting(SLM)additive manufactu...Functionally graded material(FGM)can tailor properties of components such as wear resistance,corrosion resistance,and functionality to enhance the overall performance.The selective laser melting(SLM)additive manufacturing highlights the capability in manufacturing FGMs with a high geometrical complexity and manufacture flexibility.In this work,the 316L/CuSn10/18Ni300/CoCr four-type materials FGMs were fabricated using SLM.The microstructure and properties of the FGMs were investigated to reveal the effects of SLM processing parameters on the defects.A large number of microcracks were found at the 316L/CuSn10 interface,which initiated from the fusion boundary of 316L region and extended along the building direction.The elastic modulus and nano-hardness in the 18Ni300/CoCr fusion zone decreased significantly,less than those in the 18Ni300 region or the CoCr region.The iron and copper elements were well diffused in the 316L/CuSn10 fusion zone,while elements in the CuSn10/18Ni300 and the 18Ni300/CoCr fusion zones showed significantly gradient transitions.Compared with other regions,the width of the CuSn10/18Ni300 interface and the CuSn10 region expand significantly.The mechanisms of materials fusion and crack generation at the 316L/CuSn10 interface were discussed.In addition,FGM structures without macro-crack were built by only altering the deposition subsequence of 316L and CuSn10,which provides a guide for the additive manufacturing of FGM structures.展开更多
Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Labor...Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Laboratory of Chemical Resource Engineering in Beiiing University of Chemical Technology, the orinciole for the design of controlled intercalation processes in the light of tuture production processing requirements has been developed. Intercalation assembly methods and technologies have been invented to control the intercalation process for preparing layered intercalated materials with various structures and functions.展开更多
The synthetic routes of porous carbons and the applications of the functional porous carbon-based composite electrode materials for lithium secondary batteries are reviewed. The synthetic methods have made great break...The synthetic routes of porous carbons and the applications of the functional porous carbon-based composite electrode materials for lithium secondary batteries are reviewed. The synthetic methods have made great breakthroughs to control the pore size and volume, wall thickness, surface area, and connectivity of porous carbons, which result in the development of functional porous carbon-based composite electrode materials. The effects of porous carbons on the electrochemical properties are further discussed. The porous carbons as ideal matrixes to incorporate active materials make a great improvement on the electrochemical properties because of high surface area and pore volume, excellent electronic conductivity, and strong adsorption capacity. Large numbers of the composite electrode materials have been used for the devices of electrochemical energy conversion and storage, such as lithium-ion batteries （LIBs）, Li-S batteries, and Li-O2 batteries. It is believed that functional porous carbon-based composite electrode materials will continuously contribute to the field of lithium secondary batteries.展开更多
Cellulose is one of the most abundant natural polymers in the nature,which has many attractive advantages,such as renewability,biodegradability,and biocompatibility.However,due to the strong hydrogen bond network and ...Cellulose is one of the most abundant natural polymers in the nature,which has many attractive advantages,such as renewability,biodegradability,and biocompatibility.However,due to the strong hydrogen bond network and hierarchical structure,cellulose is extremely difficult to be dissolved and processed.More recently,a class of novel eco-friendly solvents,ionic liquids,have been found to be able to efficiently dissolve cellulose,providing a versatile platform for cellulose processing and functionalization.Herein,we highlight recent advances in efficiently fabricating functional cellulose derivatives via the homogeneous chemical modification and developing all-biomass materials via controlling the dissolution-regeneration process in ionic liquids.The effective and environmentally-friendly utilization of cellulose not only reduces dependence on fossil resources but also protects the environment.展开更多
In this paper,the dynamic interaction of two parallel cracks in functionally graded materials(FGMs)is investigated by means of the non-local theory.To make the analysis tractable,the shear modulus and the material den...In this paper,the dynamic interaction of two parallel cracks in functionally graded materials(FGMs)is investigated by means of the non-local theory.To make the analysis tractable,the shear modulus and the material density are assumed to vary exponentially with the coordinate vertical to the crack.To reduce mathematical difficulties,a one-dimensional non-local kernel is used instead of a twodimensional one for the dynamic problem to obtain stress fields near the crack tips.By use of the Fourier transform,the problem can be solved with the help of two pairs of dual integral equations,in which the unknown variables are the jumps of displacements across the crack surfaces.To solve the dual integral equations,the jumps of displacements across the crack surfaces are expanded in a series of Jacobi polynomials.Unlike the classical elasticity solutions,it is found that no stress singularity is present at the crack tips.The non-local elastic solutions yield a finite hoop stress at the crack tips.The present result provides theoretical references helpful for evaluating relevant strength and preventing material failure of FGMs with initial cracks.The magnitude of the finite stress field depends on relevant parameters,such as the crack length,the distance between two parallel cracks,the parameter describing the FGMs,the frequency of the incident waves and the lattice parameter of materials.展开更多
基金supported by the National Natural Science Foundation of China(52276196)the Foundation of State Key Laboratory of Coal Combustion(FSKLCCA2508)the High-level Talent Foundation of Anhui Agricultural University(rc412307).
文摘Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.
基金supported by the National Natural Science Foundation of China(No.52103093,52103205)the Taishan Scholar Project of Shandong Province(No.tsqn202312187)+2 种基金the Natural Science Foundation of Shandong Province(ZR2024QE220)the Young Elite Scientists Sponsorship Program by CAST(No.2021QNRC001)the Jiangxi Provincial Natural Science Foundation(20232BAB214031,20242BAB25237).
文摘The urgent demand for renewable energy solutions,propelled by the global energy crisis and environmental concerns,has spurred the creation of innovative materials for solar thermal storage.Photothermal phase change materials(PTPCMs)represent a novel type of composite phase change material(PCM)aimed at improving thermal storage efficiency by incorporating photothermal materials into traditional PCMs and encapsulating them within porous structures.Various porous encapsulation materials have been studied,including porous carbon,expanded graphite,and ceramics,but issues like brittleness hinder their practical use.To overcome these limitations,flexible PTPCMs using organic porous polymers—like foams,hydrogels,and porous wood—have emerged,offering high porosity and lightweight characteristics.This review examines recent advancements in the preparation of PTPCMs based on porous polymer supports through techniques like impregnation and in situ polymerization,assessing the impact of different porous polymer materials on PCM performance and clarifying the mechanisms of photothermal conversion and heat storage.Subsequently,the most recent advancements in the applications of porous polymer-based PTPCMs are systematically summarized,and future research challenges and possible solutions are discussed.This review aims to foster awareness about the potential of PTPCMs in promoting environmentally friendly energy practices and catalyzing further research in this promising field.
基金supported by the National Natural Science Foundation of China(32170037)and SKLMT Frontiers and Challenges Project(SKLMTFCP-2023-04).
文摘Cellulosic materials are attracting increasing research interest because of their abundance,biocompatibility,and biodegradability,making them suitable in multiple industrial and medical applications.Functionalization of cellulose is usually required to improve or expand its properties to meet the requirements of different applications.Cellulose-binding domains(CBDs)found in various proteins have been shown to be powerful tools in the functionalization of cellulose materials.In this review,we firstly introduce the structural characteristics of commonly used CBDs belonging to carbohydrate-binding module families 1,2 and 3.Then,we summarize four main kinds of methodologies for employing CBDs to modify cellulosic materials(i.e.,CBD only,genetic fusion,non-covalent linkage and covalent linkage).Via different approaches,CBDs have been used to improve the material properties of cellulose,immobilize enzymes for biocatalysis,and design various detection tools.To achieve industrial applications,researches for lowering the production cost of CBDs,improving their performance(e.g.,stability),and expanding their application scenarios are still in need.
文摘SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.
基金National Natural Science Foundation of China(51975286)。
文摘Fe-Mo functionally graded materials(FGMs)with different composition-change rates from 100%304 stainless steel to 100%Mo along the composition gradient direction were prepared by electron beam-directed energy deposition(EB-DED)technique,including three samples with composition mutation of 100%,composition change rate of 10%and 30%.Results show that the composition-change rate significantly affects the microstructure and mechanical properties of the samples.In the sample with abrupt change of composition,the sharp shift in composition between 304 stainless steel and Mo leads to a great difference in the microstructure and hardness near the interface between the two materials.With the increase in the number of gradient layers,the composition changes continuously along the direction of deposition height,and the microstructure morphology shows a smooth transition from 304 stainless steel to Mo,which is gradually transformed from columnar crystal to dendritic crystal.Elements Fe,Mo,and other major elements transform linearly along the gradient direction,with sufficient interlayer diffusion between the deposited layers,leading to good metallurgical bonding.The smaller the change in composition gradient,the greater the microhardness value along the deposition direction.When the composition gradient is 10%,the gradient layer exhibits higher hardness(940 HV)and excellent resistance to surface abrasion,and the overall compressive properties of the samples are better,with the compressive fracture stress in the top region reaching 750.05±14 MPa.
基金supported by the National Research Foundation of Korea(NRF)(No.2021R1C1C2009703)supported by the National Research Foundation of Korea(NRF)Grant funded by the Korea government(MSIT)(RS-2024-00344920)supported by the Human Resources Development of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)Grant funded by the Ministry of Trade,Industry and Energy of Korea(No.RS2023-00244330)。
文摘With the growing importance of wearable and portable electronics in modern society and industry,researchers from all over the world have reported on advances in energy harvesting and self-powered sensing technologies.The current review discusses recent developments in triboelectric platforms from a manufacturing perspective,including material,design,application,and industrialization.Manufacturing is an essential component of both industry and technology.The use of a proper manufacturing process enables cutting-edge technology in a lab-scale stage to progress to commercialization and popularization with scalability,availability,commercial advantage,and consistent quality.Furthermore,much literature has emphasized that the most powerful advantage of the triboelectric platform is its wide range of available materials and simple working mechanism,both of which are important characteristics in manufacturing engineering.As a result,different manufacturing processes can be implemented as needed.Because the practical process can have a synergetic effect on the fundamental development,resulting in the growth of both,the development of the triboelectric platform from the standpoint of manufacturing engineering can be further advanced.However,research into the development of a productive manufacturing process is still in its early stages in the field of triboelectric platforms.This review looks at the various manufacturing technologies used in previous studies and discusses the potential benefits of the appropriate process for triboelectric platforms.Given its unique strength,which includes a diverse material selection and a simple working mechanism,the triboelectric platform can use a variety of manufacturing technologies and the process can be optimized as needed.Numerous research groups have clearly demonstrated the triboelectric platform's advantages.As a result,using appropriate manufacturing processes can accelerate the technological advancement of triboelectric platforms in a variety of research and industrial fields by allowing them to move beyond the lab-scale fabrication stage.
基金supported by National Natural Science Foundation of China(Grant Nos.32201499,32222057,and 22478142)Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2023A1515012519,2023A0505050114,and 2024B1515040004)+1 种基金National Key Research and Development Project(Grant No 2023YFE0109600)State Key Laboratory of Advanced Papermaking and Paper-based Materials(2024C02).
文摘The rapid development of portable electronics,wearable technologies,and healthcare monitoring systems necessitates the innovation of flexible energy storage systems.Considering environmental pollution and the depletion of fossil resources,the utilization of renewable resources to engineer advanced flexible materials has become especially crucial.Cellulose,the most abundant natural polymer,has emerged as a promising precursor for advanced functional materials due to its unique structure and properties.Typically,the easy processability,tunable chemical structure,self-assembly behavior,mechanical strength,and reinforcing capability enable its utilization as binder,substrate,hybrid electrode,separator,and electrolyte reservoir for flexible energy storage devices.This review comprehensively summarizes the design,fabrication,and mechanical and electrochemical performances of cellulose-based materials.The structure and unique properties of cellulose are first briefly introduced.Then,the construction of cellulose-based materials in the forms of 1D fibers/filaments,2D films/membranes,3D hydrogels and aerogels is discussed,and the merits of cellulose in these materials are emphasized.After that,the various advanced applications in supercapacitors,lithium-ion batteries,lithium-sulfur batteries,sodium-ion batteries,metal-air batteries,and Zn-ion batteries are presented in detail.Finally,an outlook of the potential challenges and future perspectives in advanced cellulose-based materials for flexible energy storage systems is discussed.
文摘Mechanical loading constitutes a fundamental determinant in the process of bone remodeling.This modeling encompasses the incorporation of mechanical stimuli,the involvement of cellular and molecular constituents,as well as the utilization of sophisticated computational methodologies.Such an approach is imperative for forecasting bone behaviour across varying environmental conditions.In the present study,key findings from bone mechanobiology are reviewed,along with the possibility that Functionally Graded Materials(FGM)enhances osseointegration and lowers the stress-shielding effect during bone remodeling and compared to titanium,FGM improves periprosthetic bone remodeling.To summarise some of the most important findings from computational models of bone mechanobiology,explaining how modifications to the mechanical environment affect implant design,growth of bone,and bone response.The impact that changes related to the mechanical environment have on bone response is examined using computational models and methods such as surface microtopography to determine how an implant’s bone density has increased over time.This review focuses on the refinement of advanced simulation frameworks and their synergy with imaging technologies to strengthen model validation,ultimately resulting in better clinical outcomes in the context of bone health treatments.
基金financially supported by the National Key R&D Program of China(No.2023YFA0915300)the National Natural Science Foundation of China(Nos.52233012,22405212 and22471219)the Funds for Creative Research Groups of China of the National Natural Science Foundation of China(No.21821001)。
文摘Intracellular polymerization is an emerging field,showcasing high diversity and efficiency of chemistry.Motivated by the principles of natural biomolecular synthesis,polymerization within living cells is believed to be a powerful and versatile tool to modulate cell behavior.In this review,we summarized recent advances and future trends in the field of intracellular polymerization,specifically focusing on covalent and supramolecular polymerization.This discussion comprehensively covers the diverse chemical designs,reaction mechanisms,responsive features,and functional applications.Furthermore,we also clarified the connection between preliminary design of polymer synthesis and their subsequent biological applications.We hope this review will serve as an innovative platform for chemists and biologists to regulate biological functions in practical applications and clinical trials.
基金support provided by National Natural Science Foundation of China(22471018,22071008,22208018)support provided by the Shenzhen Science and Technology Program(JCYJ20220818100012025).
文摘Functionally graded materials (FGMs) are innovative materials distinguished by gradual variations in composition and structure, offering exceptional properties for diverse applications. Poly(ionic liquid)s (PILs), merging the characteristics of polymers and ionic liquids, have emerged as viable options for the development of FGMs given their tunable skeleton, ionic conductivity, and compatibility with various functional materials. This review highlights the latest advancements in the design strategies of FGMs based on porous PILs, focusing on single and multi-gradient structures. Furthermore, we also highlight their emerging applications in molecular recognition, sensing, adsorption, separation, and catalysis. By exploring the interplay between porosity, ionic functionality, and gradient architecture, this review offers perspectives on the prospects of PIL-based FGMs for tackling global challenges in energy, environment, and healthcare.
基金Open access funding provided by The Science,Technology&Innovation Funding Authority(STDF)in cooperation with The Egyptian Knowledge Bank(EKB).
文摘Soft robotic manipulators represent a rapidly evolving field characterized by inherent compliance,adaptability,and safe interactions within unstructured environments.Over the past decade(2015-2025),significant advancements have trans-formed their capabilities through novel designs inspired by biological systems,advanced modeling frameworks,sophisti-cated control strategies,and integration into diverse real-world applications.Recent innovations in multifunctional mate-rials and emerging actuation technologies have markedly expanded manipulator performance,reliability,and dexterity.Concurrently,developments in modeling have progressed from simplified geometric methods toward highly accurate physics-based and hybrid data-driven approaches,substantially improving real-time prediction and controllability.Coupled with these developments,adaptive and robust control strategies-including learning-based techniques-have enabled unprec-edented autonomy and precision in challenging application domains such as Minimally Invasive Surgery(MIS),precision agriculture,deep-sea exploration,disaster recovery,and space missions.Despite these remarkable strides,key challenges remain,notably regarding scalability,long-term material durability,robust integrated sensing,and standardized evaluation procedures.This review comprehensively synthesizes recent advances,critically evaluates state-of-the-art methodologies,and systematically identifies existing gaps to provide a clear roadmap and targeted research directions,guiding future developments toward the broader adoption and optimal utilization of soft robotic manipulators.
基金Project supported by the National Natural Science Foundation of China(Nos.12021002,12192212,and 12462007)。
文摘This study explores the dynamic contact response of a viscoelastic functionally graded material(FGM)-coated half-plane under a rigid flat punch subjected to a time-harmonic vertical force.The elastic modulus and mass density of the FGM coating vary exponentially along the thickness direction.The FGM coating and the homogeneous half-plane possess viscoelastic properties,which are described by a linearly hysteretic damping model.By applying the asymptotic method and the Fourier integral transform technique,the contact problem is converted into a Cauchy singular integral equation.The effects of excitation frequency,gradient index,damping factor ratio,and punch width on the vertical impedance and dynamic contact stress are analyzed.The results indicate that adjusting the gradient index of the FGM coating can significantly affect the contact stress and vertical impedance.
文摘Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic production techniques for manufacturing functionally graded materials. Attention is paid to the principles for obtaining graded structure mainly in the metal based functionally graded materials. Several unpublished results obtained by the authors have been discussed briefly. Experimental methods and theoretical analysis for qualitative and quantitative estimation of graded properties have also been presented. The article can be useful for people who work in the field of functionally graded structures and materials, and who need a compact informative review of recent experimental and theoretical activity in this area.
文摘The effects of the component gradient distribution at interface and the fiber gradient distribution on the strength of cement-based materials were studied. The results show that the flexural strength and compressive strength of the mortar and concrete with interface component and fiber gradient distributions are obviously improved. The strengthes of the fiber gradient distributed mortar and concrete (FGDM/C) are higher than those of fiber homogeneously distributed mortar and concrete (FHDM/C). To obtain the same strength, therefore, a smaller fiber volume content in FGDM/C is needed than that in FHDM/C. The results also show that the component gradient distribution of the concrete can be obtained by means of multi-layer vibrating formation.
基金Project(2020B090922002)supported by Guangdong Provincial Key Field Research and Development Program,ChinaProjects(51875215,52005189)supported by the National Natural Science Foundation of ChinaProject(2019B1515120094)supported by Guangdong Provincial Basic and Applied Basic Research Fund,China。
文摘Functionally graded material(FGM)can tailor properties of components such as wear resistance,corrosion resistance,and functionality to enhance the overall performance.The selective laser melting(SLM)additive manufacturing highlights the capability in manufacturing FGMs with a high geometrical complexity and manufacture flexibility.In this work,the 316L/CuSn10/18Ni300/CoCr four-type materials FGMs were fabricated using SLM.The microstructure and properties of the FGMs were investigated to reveal the effects of SLM processing parameters on the defects.A large number of microcracks were found at the 316L/CuSn10 interface,which initiated from the fusion boundary of 316L region and extended along the building direction.The elastic modulus and nano-hardness in the 18Ni300/CoCr fusion zone decreased significantly,less than those in the 18Ni300 region or the CoCr region.The iron and copper elements were well diffused in the 316L/CuSn10 fusion zone,while elements in the CuSn10/18Ni300 and the 18Ni300/CoCr fusion zones showed significantly gradient transitions.Compared with other regions,the width of the CuSn10/18Ni300 interface and the CuSn10 region expand significantly.The mechanisms of materials fusion and crack generation at the 316L/CuSn10 interface were discussed.In addition,FGM structures without macro-crack were built by only altering the deposition subsequence of 316L and CuSn10,which provides a guide for the additive manufacturing of FGM structures.
基金Supported by the National Key Technologies R＆D Program （2011BAE28B01） and the National Natural Science Foundation of China （21276016）.
文摘Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Laboratory of Chemical Resource Engineering in Beiiing University of Chemical Technology, the orinciole for the design of controlled intercalation processes in the light of tuture production processing requirements has been developed. Intercalation assembly methods and technologies have been invented to control the intercalation process for preparing layered intercalated materials with various structures and functions.
基金supported by the Programs of National 973 (2011CB935900)NSFC (51231003 and 21231005)+1 种基金111 Project (B12015)Tianjin High-Tech (10SYSYJC27600)
文摘The synthetic routes of porous carbons and the applications of the functional porous carbon-based composite electrode materials for lithium secondary batteries are reviewed. The synthetic methods have made great breakthroughs to control the pore size and volume, wall thickness, surface area, and connectivity of porous carbons, which result in the development of functional porous carbon-based composite electrode materials. The effects of porous carbons on the electrochemical properties are further discussed. The porous carbons as ideal matrixes to incorporate active materials make a great improvement on the electrochemical properties because of high surface area and pore volume, excellent electronic conductivity, and strong adsorption capacity. Large numbers of the composite electrode materials have been used for the devices of electrochemical energy conversion and storage, such as lithium-ion batteries （LIBs）, Li-S batteries, and Li-O2 batteries. It is believed that functional porous carbon-based composite electrode materials will continuously contribute to the field of lithium secondary batteries.
基金the Youth Innovation Promotion Association CAS(No.2018040)the National Natural Science Foundation of China(Nos.U2004211 and 52173292).
文摘Cellulose is one of the most abundant natural polymers in the nature,which has many attractive advantages,such as renewability,biodegradability,and biocompatibility.However,due to the strong hydrogen bond network and hierarchical structure,cellulose is extremely difficult to be dissolved and processed.More recently,a class of novel eco-friendly solvents,ionic liquids,have been found to be able to efficiently dissolve cellulose,providing a versatile platform for cellulose processing and functionalization.Herein,we highlight recent advances in efficiently fabricating functional cellulose derivatives via the homogeneous chemical modification and developing all-biomass materials via controlling the dissolution-regeneration process in ionic liquids.The effective and environmentally-friendly utilization of cellulose not only reduces dependence on fossil resources but also protects the environment.
基金The project supported by the National Natural Science Foundation of China(90405016,10572044)the Specialized Research Fund for the Doctoral Program of Higher Education(20040213034)
文摘In this paper,the dynamic interaction of two parallel cracks in functionally graded materials(FGMs)is investigated by means of the non-local theory.To make the analysis tractable,the shear modulus and the material density are assumed to vary exponentially with the coordinate vertical to the crack.To reduce mathematical difficulties,a one-dimensional non-local kernel is used instead of a twodimensional one for the dynamic problem to obtain stress fields near the crack tips.By use of the Fourier transform,the problem can be solved with the help of two pairs of dual integral equations,in which the unknown variables are the jumps of displacements across the crack surfaces.To solve the dual integral equations,the jumps of displacements across the crack surfaces are expanded in a series of Jacobi polynomials.Unlike the classical elasticity solutions,it is found that no stress singularity is present at the crack tips.The non-local elastic solutions yield a finite hoop stress at the crack tips.The present result provides theoretical references helpful for evaluating relevant strength and preventing material failure of FGMs with initial cracks.The magnitude of the finite stress field depends on relevant parameters,such as the crack length,the distance between two parallel cracks,the parameter describing the FGMs,the frequency of the incident waves and the lattice parameter of materials.
