This study was conducted to verify the results of a preceding retrospective pilot study by means of a prospective controlled investigation including a larger sample size. Therefore, the aim of this clinical investigat...This study was conducted to verify the results of a preceding retrospective pilot study by means of a prospective controlled investigation including a larger sample size. Therefore, the aim of this clinical investigation was to analyze the relationship between sleep bruxism and several functional and occlusal parameters. The null hypothesis of this study was that there would be no differences among sleep bruxism subjects and non-sleep bruxism controls regarding several functional and occlusal parameters. Fifty-eight sleep bruxism subjects and 31 controls participated in this study. The diagnosis sleep bruxism was based on clinical criteria of the American Academy of Sleep Medicine. Sixteen functional and occlusal parameters were recorded clinically or from dental study casts. Similar to the recently published retrospective pilot study, with a mean slide of 0.77 mm （s.d., 0.69 mm） in the sleep bruxism group and a mean slide of 0.4 mm （s.d., 0.57 mm） in the control group, the evaluation of the mean comparison between the two groups demonstrated a larger slide from centric occlusion to maximum intercuspation in sleep bruxism subjects （Mann-Whitney U-test; P=O.O08）. However, following Bonferroni adjustment, none of the 16 occlusal and functional variables differed significantly between the sleep bruxism subjects and the non-sleep bruxism controls. The present study shows that the occlusal and functional parameters evaluated do not differ between sleep bruxism subjects and non-sleep bruxism subjects. However, as the literature reveals a possible association between bruxism and certain subgroups of temporomandibular disorders, it appears advisable to incorporate the individual adaptive caoacitv of the stomatognathic svstem into future investigations.展开更多
This study introduces a continuum medium approximation(CMA)and an empirical effective medium approxi-mation(EMA)-type formulation to estimate the transport properties,including electrical conductivity,thermal conducti...This study introduces a continuum medium approximation(CMA)and an empirical effective medium approxi-mation(EMA)-type formulation to estimate the transport properties,including electrical conductivity,thermal conductivity,Seebeck coefficient,and Hall mobility,of nanostructured composites.The CMA incorporates the interface parameters mediated by newly introduced distribution functions to resolve predictions that deviate from the inclusion properties at its volume fraction of 1 in current EMAs and yields predictions agreed well with both the empirical EMA and experimental data.The empirical EMA-type formulation resolves the differ-ences in CMA predictions for the media A_(1-x)B_(x)and B_(1-x)A_(x)and provides a unique prediction that agrees very well with experimental data at a given volume fraction ranging from 0 to 1.The effects of the interface param-eters on the transport properties were investigated.The results indicated that the efficiency of nanostructured composites could be further improved by optimizing the interface parameters.展开更多
An integral constitutive equation and a set of material functions for describing the strain history of polymer melts were formulated in terms of the Cauchy-Green and Finger tensors. A simple memory function and the de...An integral constitutive equation and a set of material functions for describing the strain history of polymer melts were formulated in terms of the Cauchy-Green and Finger tensors. A simple memory function and the dependence of ηo and τt on M3.4 were derived from the theory of non-linear viscoelasticity with constraints of entanglements for polymer melts and substituted into the Oldroye-Walters-Fredickson constitutive equation. An integral constitutive equation for polymer melts was consequently obtained. Some material functions of the constitutive equation related to certain 'test flow' are examined as follows : (1) simple steady shear flow; (2) steady elongation flow; (3) small-amplitude oscillatory shear flow; (4) stress growth upon the inception of steady shear elongation flow; (5) stress relaxation (modulus and compllance). These theoretical relations for simple steady shear flow were compared with experimental data from our laboratory and references for various polymer melts and concentrated solutions. A good agreement between the theory and experiment was achieved.展开更多
In this paper, the inverse problem of the medium parameters in an inhomogeneous medium is studied and a generalized ray approximate form of the total wave field is described. First, the acoustic wave equation derived ...In this paper, the inverse problem of the medium parameters in an inhomogeneous medium is studied and a generalized ray approximate form of the total wave field is described. First, the acoustic wave equation derived from the elastic wave equation is studied, the referential variables and perturbational variables are introduced, and the integral equation of the medium perturbational parameters is obtained. Then from the point of view of the local principles of the wave function in an inhomogeneous medium, a generalized ray approximate form of the total wave field in an inhomogeneous medium is described, and attention is focused on the Fredholm integral equation of the first kind. Finally, the medium parameters in half-plane are inversed. Numerical examples show when the perturbations of the medium parameters are about 0.5, this method can effectively inverse its variation. Apparently, this method is better than the conventional Born weak scattering approximation.展开更多
X-ray diffraction line profiles of low density polyethylene(LDPE)/ (ethylene-propylene-octene-1)copolymer(EPO)blends have been analyzed with variance range function method.Theories for determining the microparacrystal...X-ray diffraction line profiles of low density polyethylene(LDPE)/ (ethylene-propylene-octene-1)copolymer(EPO)blends have been analyzed with variance range function method.Theories for determining the microparacrystallite size and the distortion parameter from single reflection have been described,and the value of these two parameters at (110)and(200)directions have been determined.展开更多
Pericentric inversion of chromosome 9(inv[9])is a common chromosomal structural variant,but its impact on clinical outcomesremains debated.The screening criteria of sperm banks are rarely mentioned to individuals with...Pericentric inversion of chromosome 9(inv[9])is a common chromosomal structural variant,but its impact on clinical outcomesremains debated.The screening criteria of sperm banks are rarely mentioned to individuals with inv(9).In this study,we evaluatedthe fertility of sperm donors with inv(9)who met eligibility criteria for sperm banks(inv[9]-eligible donors).From March 2004 toMay 2022,chromosomal analysis of 16124 sperm donors at CITIC-Xiangya Human Sperm Bank in Hunan Province(Changsha,China)found that 251(1.6%)had chromosome variations,with inv(9)being the most prevalent at 1.1%.All 169 inv(9)-eligibledonors were contacted to collect fertility outcome data,along with 206 eligible donors without inv(9)as controls.In addition,semen samples from inv(9)-eligible donors and eligible donors underwent assessments of sperm fluorescence in situ hybridization(FISH),mitochondrial membrane potential,DNA fragmentation index,acrosome integrity,reactive oxygen species(ROS),andsperm morphology.Results showed that inv(9)did not significantly increase reproductive risks overall.Despite detecting ROSlevel differences,the clinical impact may be insignificant.This study provides new data on the inv(9)population that can serveas a valuable reference for decision-making by sperm banks as well as for genetic counseling and clinical guidance for individualscarrying inv(9)variant.展开更多
This work highlights the unparalleled efficiency of the “n<sup>th</sup>-Order Function/ Feature Adjoint Sensitivity Analysis Methodology for Nonlinear Systems” (n<sup>th</sup>-FASAM-N) by con...This work highlights the unparalleled efficiency of the “n<sup>th</sup>-Order Function/ Feature Adjoint Sensitivity Analysis Methodology for Nonlinear Systems” (n<sup>th</sup>-FASAM-N) by considering the well-known Nordheim-Fuchs reactor dynamics/safety model. This model describes a short-time self-limiting power excursion in a nuclear reactor system having a negative temperature coefficient in which a large amount of reactivity is suddenly inserted, either intentionally or by accident. This nonlinear paradigm model is sufficiently complex to model realistically self-limiting power excursions for short times yet admits closed-form exact expressions for the time-dependent neutron flux, temperature distribution and energy released during the transient power burst. The n<sup>th</sup>-FASAM-N methodology is compared to the extant “n<sup>th</sup>-Order Comprehensive Adjoint Sensitivity Analysis Methodology for Nonlinear Systems” (n<sup>th</sup>-CASAM-N) showing that: (i) the 1<sup>st</sup>-FASAM-N and the 1<sup>st</sup>-CASAM-N methodologies are equally efficient for computing the first-order sensitivities;each methodology requires a single large-scale computation for solving the “First-Level Adjoint Sensitivity System” (1<sup>st</sup>-LASS);(ii) the 2<sup>nd</sup>-FASAM-N methodology is considerably more efficient than the 2<sup>nd</sup>-CASAM-N methodology for computing the second-order sensitivities since the number of feature-functions is much smaller than the number of primary parameters;specifically for the Nordheim-Fuchs model, the 2<sup>nd</sup>-FASAM-N methodology requires 2 large-scale computations to obtain all of the exact expressions of the 28 distinct second-order response sensitivities with respect to the model parameters while the 2<sup>nd</sup>-CASAM-N methodology requires 7 large-scale computations for obtaining these 28 second-order sensitivities;(iii) the 3<sup>rd</sup>-FASAM-N methodology is even more efficient than the 3<sup>rd</sup>-CASAM-N methodology: only 2 large-scale computations are needed to obtain the exact expressions of the 84 distinct third-order response sensitivities with respect to the Nordheim-Fuchs model’s parameters when applying the 3<sup>rd</sup>-FASAM-N methodology, while the application of the 3<sup>rd</sup>-CASAM-N methodology requires at least 22 large-scale computations for computing the same 84 distinct third-order sensitivities. Together, the n<sup>th</sup>-FASAM-N and the n<sup>th</sup>-CASAM-N methodologies are the most practical methodologies for computing response sensitivities of any order comprehensively and accurately, overcoming the curse of dimensionality in sensitivity analysis.展开更多
The partial replacement of durum wheat semolina with local flours such as soybeans and yam reduces the dependence of durum wheat semolina for the production of pasta</span><span style="font-family:Verdan...The partial replacement of durum wheat semolina with local flours such as soybeans and yam reduces the dependence of durum wheat semolina for the production of pasta</span><span style="font-family:Verdana;">.</span></span><span style="font-family:""> </span><span style="font-family:Verdana;">The</span><span style="font-family:""><span style="font-family:Verdana;"> main objective of this study is to develop yam flour (A) from Dioscorea alata in the manufacture of pasta made with durum wheat semolina (B) and soy flour (C) (raw materials). The methodology adopted consists first of all in the characterization of yam, soybean </span><span style="font-family:Verdana;">and</span><span style="font-family:Verdana;"> durum wheat semolina. An experimental design was developed to bring out the balanced mixing plan in well-defined proportions with ten (10) tests. Chemical and functional analyzes were carried out on the pastes obtained from these formulations. The functional properties allowed us to determine the optimal mixing plan using a mathematical model. The sensory properties of the optimal compound dough were estimated in comparison with the control doughs. The results on the chemical properties of raw materials A, B </span><span style="font-family:Verdana;">and</span><span style="font-family:Verdana;"> C obtained on the water content vary from 10.29% to 12.29%;those of ashes vary from 0.91% to 5.74% and those of proteins vary from 3.24% to 20.17%. The results of the chemical and functional parameters of compound pasta gave very diverse values. We find that the water content, the ash content, the protein content </span><span style="font-family:Verdana;">and</span><span style="font-family:Verdana;"> the acidity rate of the series of 10 tests are respectively from 6.60% to 14.97%, from 0.97% to 1.67%, from 7.15% to 12.10% </span><span style="font-family:Verdana;">and</span><span style="font-family:Verdana;"> from 1.35% to 3.60%. Regarding the optimal cooking time for this series of 10 tests, it varies from 15 min to 20 min with a swelling index which is between 59.70% and 107.12%. Statistical tests (test F) from the different models indicate that the main regression effects are not significant with a p-value probability greater than 0.05. The models obtained were significant with a good value for the coefficient of determination R</span><sup><span style="font-family:Verdana;">2</span></sup><span style="font-family:Verdana;">. The sensory test approved that optimal compound pasta has good overall acceptability compared to 100% durum wheat pasta. The 20.40% yam flour mixture (102.020 g);55.19% of durum wheat semolina (275.982 g) and 24.39% of soy flour (121.998 g) has good potential in the preparation of compound pasta.展开更多
In this paper, we apply function parameters to real interpolation of Lorentz- Orlicz martingale spaces. Some new interpolation theorems are formulated which generalize some known results in Lorentz spaces An introduce...In this paper, we apply function parameters to real interpolation of Lorentz- Orlicz martingale spaces. Some new interpolation theorems are formulated which generalize some known results in Lorentz spaces An introduced by Sharpley.展开更多
A robust H∞ directional controller for a sampled-data autonomous airship with polytopic parameter uncertainties was proposed. By input delay approach, the linearized airship model was transformed into a continuous-ti...A robust H∞ directional controller for a sampled-data autonomous airship with polytopic parameter uncertainties was proposed. By input delay approach, the linearized airship model was transformed into a continuous-time system with time-varying delay. Sufficient conditions were then established based on the constructed Lyapunov-Krasovskii functional, which guarantee that the system is mean-square exponentially stable with H∞ performance. The desired controller can be obtained by solving the obtained conditions. Simulation results show that guaranteed minimum H∞ performance γ=1.4037 and fast response of attitude for sampled-data autonomous airship are achieved in spite of the existence of parameter uncertainties.展开更多
The electronic band structures and band gap bowing parameters of In_xGa_（1-x）N are studied by the firstprinciples method based on the density functional theory. Calculations by employing both the Heyd-ScuseriaErnzer...The electronic band structures and band gap bowing parameters of In_xGa_（1-x）N are studied by the firstprinciples method based on the density functional theory. Calculations by employing both the Heyd-ScuseriaErnzerh of hybrid functional（HSE06） and the Perdew-Burke-Ernzerhof（PBE） one are performed. We found that the theoretical band gap bowing parameter is dependent significantly on the calculation method, especially on the exchange-correlation functional employed in the DFT calculations. The band gap of In_xGa_（1-x）N alloy decreases considerably when the In constituent x increases. It is the interactions of s–s and p–p orbitals between anions and cations that play significant roles in formatting the band gaps bowing. In general, the HSE06 hybrid functional could provide a good alternative to the PBE functional in calculating the band gap bowing parameters.展开更多
Objective：A computational model of insulin secretion and glucose metabolism for assisting the diagnosis of diabetes mellitus in clinical research is introduced.The proposed method for the estimation of parameters for...Objective：A computational model of insulin secretion and glucose metabolism for assisting the diagnosis of diabetes mellitus in clinical research is introduced.The proposed method for the estimation of parameters for a system of ordinary differential equations（ODEs）that represent the time course of plasma glucose and insulin concentrations during glucose tolerance test（GTT）in physiological studies is presented.The aim of this study was to explore how to interpret those laboratory glucose and insulin data as well as enhance the Ackerman mathematical model.Methods：Parameters estimation for a system of ODEs was performed by minimizing the sum of squared residuals（SSR）function,which quantifies the difference between theoretical model predictions and GTT＇s experimental observations.Our proposed perturbation search and multiple-shooting methods were applied during the estimating process.Results：Based on the Ackerman＇s published data,we estimated the key parameters by applying R-based iterative computer programs.As a result,the theoretically simulated curves perfectly matched the experimental data points.Our model showed that the estimated parameters,computed frequency and period values,were proven a good indicator of diabetes.Conclusion：The present paper introduces a computational algorithm to biomedical problems,particularly to endocrinology and metabolism fields,which involves two coupled differential equations with four parameters describing the glucose-insulin regulatory system that Ackerman proposed earlier.The enhanced approach may provide clinicians in endocrinology and metabolism field insight into the transition nature of human metabolic mechanism from normal to impaired glucose tolerance.展开更多
Panicle swarm optimization （PSO） is an optimization algorithm based on the swarm intelligent principle. In this paper the modified PSO is applied to a kernel principal component analysis （ KPCA ） for an optimal ke...Panicle swarm optimization （PSO） is an optimization algorithm based on the swarm intelligent principle. In this paper the modified PSO is applied to a kernel principal component analysis （ KPCA ） for an optimal kernel function parameter. We first comprehensively considered within-class scatter and between-class scatter of the sample features. Then, the fitness function of an optimized kernel function parameter is constructed, and the particle swarm optimization algorithm with adaptive acceleration （CPSO） is applied to optimizing it. It is used for gearbox condi- tion recognition, and the result is compared with the recognized results based on principal component analysis （PCA）. The results show that KPCA optimized by CPSO can effectively recognize fault conditions of the gearbox by reducing bind set-up of the kernel function parameter, and its results of fault recognition outperform those of PCA. We draw the conclusion that KPCA based on CPSO has an advantage in nonlinear feature extraction of mechanical failure, and is helpful for fault condition recognition of complicated machines.展开更多
[Objectives] To determine the protective effect of Shenfu injection( SFI) on chronic heart failure( CHF) in rats induced by doxorubicin. [Methods] CHF was induced by doxorubicin via intraperitoneal injection in rats. ...[Objectives] To determine the protective effect of Shenfu injection( SFI) on chronic heart failure( CHF) in rats induced by doxorubicin. [Methods] CHF was induced by doxorubicin via intraperitoneal injection in rats. The cardiac function parameters,the heart index,the serum brain natriuretic peptide( BNP) level and cardiac histopathology were measured 4 weeks after Shenfu injection treatment. [Results]Shenfu injection remarkably improved the heart index and cardiac histopathology,increased the heart rate( HR),left ventricular systolic pressure( LVSP),maximum rising rate of left ventricular pressure( + dp/dtmax) and dropping rate of left ventricular pressure(-dp/dtmax),reduced the left ventricular end-diastolic pressure( LVEDP) and serum BNP level of rats with CHF induced by doxorubicin. [Conclusions]Shenfu injection exerts protective effect on CHF induced by doxorubicin.展开更多
The potential energy curves （PECs） of the 3Π states of GaX （X=F, Cl, and Br） molecules are calculated using the multireference configuration interaction method with a large contracted basis set aug-cc-pV5Z. The P...The potential energy curves （PECs） of the 3Π states of GaX （X=F, Cl, and Br） molecules are calculated using the multireference configuration interaction method with a large contracted basis set aug-cc-pV5Z. The PECs are accurately fitted to analytical potential energy functions （APEFs） using the Murrell–Sorbie potential function. The spectroscopic parameters for the states are determined using the obtained APEFs, and compared with the theoretical and experimental data available presently in the literature.展开更多
The relocity and sirain-rate .field which are different from Avilzur's have beenestablished in Caitesian coordinates. Using the integral as a function of the upper limitand integration depending on a parameler, an...The relocity and sirain-rate .field which are different from Avilzur's have beenestablished in Caitesian coordinates. Using the integral as a function of the upper limitand integration depending on a parameler, an analylical upper-bound solution todrawing stress through idling rolls has been obtained in this paper.展开更多
Multi-reference configuration interaction is used to produce potential energy curves （PECs） for the excited B1FI state of KH molecule. To investigate the correlation effect of core-valence electrons, five schemes ar...Multi-reference configuration interaction is used to produce potential energy curves （PECs） for the excited B1FI state of KH molecule. To investigate the correlation effect of core-valence electrons, five schemes are employed which include the different correlated electrons and different active spaces. The PECs are fitted into analytical potential energy functions （APEFs）. The spectroscopic parameters, ro-vibrational levels, and transition frequencies are determined based on the APEFs and compared with available experimental and theoretical data. The molecular properties for B1II obtained in this letter, which are better than those available in literature, can be reproduced with calculations using the suitable correlated electrons and active space of orbitals.展开更多
By analyzing the structure of the objective function based on error sum of squares and the information provided by the objective function, the essential problems in the current parameter estimation methods are summari...By analyzing the structure of the objective function based on error sum of squares and the information provided by the objective function, the essential problems in the current parameter estimation methods are summarized: (1) the information extracted from the objective function based on error sum of squares is unreasonable or even wrong for parameter estimation; and (2) the surface of the objective function based on error sum of squares is more complex than that of the parameter function, which indicates that the optimal parameter values should be searched on the surface of the parameter function instead of the objective function. This paper proposes the concept of sample intersection and demonstrates the uniqueness theorem of intersection point (namely the uniqueness of optimal parameter values). According to the characteristics of parameter function surface and Taylor series expansion, a parameter estimation method based on the sample intersection information extracted from parameter function surface (PFS method) was constructed. The results of theoretical analysis and practical application show that the proposed PFS method can avoid the problems in the current automatic parameter calibration, and has fast convergence rate and good performance in parameter calibration.展开更多
In this paper,we apply function parameters,introduced by Persson,to real interpolation of Lorentz martingale spaces.Some new interpolation theorems concerning Lorentz martingale spaces are formulated.The results that ...In this paper,we apply function parameters,introduced by Persson,to real interpolation of Lorentz martingale spaces.Some new interpolation theorems concerning Lorentz martingale spaces are formulated.The results that we obtain generalize some fundamental interpolation theorems in classical martingale Hp theory.展开更多
Hardy spaces with generalized parameter are introduced following the maximal characterization approach. As particular cases, they include the classical Hp spaces and the Hardy-Lorentz spaces H^p,q. Real interpolation ...Hardy spaces with generalized parameter are introduced following the maximal characterization approach. As particular cases, they include the classical Hp spaces and the Hardy-Lorentz spaces H^p,q. Real interpolation results with function parameter are obtained, Based on them, the behavior of some classical operators is studied in this generalized setting.展开更多
基金supported in part by grants from the German Research Foundation (839/6-1,839/6-2)
文摘This study was conducted to verify the results of a preceding retrospective pilot study by means of a prospective controlled investigation including a larger sample size. Therefore, the aim of this clinical investigation was to analyze the relationship between sleep bruxism and several functional and occlusal parameters. The null hypothesis of this study was that there would be no differences among sleep bruxism subjects and non-sleep bruxism controls regarding several functional and occlusal parameters. Fifty-eight sleep bruxism subjects and 31 controls participated in this study. The diagnosis sleep bruxism was based on clinical criteria of the American Academy of Sleep Medicine. Sixteen functional and occlusal parameters were recorded clinically or from dental study casts. Similar to the recently published retrospective pilot study, with a mean slide of 0.77 mm （s.d., 0.69 mm） in the sleep bruxism group and a mean slide of 0.4 mm （s.d., 0.57 mm） in the control group, the evaluation of the mean comparison between the two groups demonstrated a larger slide from centric occlusion to maximum intercuspation in sleep bruxism subjects （Mann-Whitney U-test; P=O.O08）. However, following Bonferroni adjustment, none of the 16 occlusal and functional variables differed significantly between the sleep bruxism subjects and the non-sleep bruxism controls. The present study shows that the occlusal and functional parameters evaluated do not differ between sleep bruxism subjects and non-sleep bruxism subjects. However, as the literature reveals a possible association between bruxism and certain subgroups of temporomandibular disorders, it appears advisable to incorporate the individual adaptive caoacitv of the stomatognathic svstem into future investigations.
文摘This study introduces a continuum medium approximation(CMA)and an empirical effective medium approxi-mation(EMA)-type formulation to estimate the transport properties,including electrical conductivity,thermal conductivity,Seebeck coefficient,and Hall mobility,of nanostructured composites.The CMA incorporates the interface parameters mediated by newly introduced distribution functions to resolve predictions that deviate from the inclusion properties at its volume fraction of 1 in current EMAs and yields predictions agreed well with both the empirical EMA and experimental data.The empirical EMA-type formulation resolves the differ-ences in CMA predictions for the media A_(1-x)B_(x)and B_(1-x)A_(x)and provides a unique prediction that agrees very well with experimental data at a given volume fraction ranging from 0 to 1.The effects of the interface param-eters on the transport properties were investigated.The results indicated that the efficiency of nanostructured composites could be further improved by optimizing the interface parameters.
文摘An integral constitutive equation and a set of material functions for describing the strain history of polymer melts were formulated in terms of the Cauchy-Green and Finger tensors. A simple memory function and the dependence of ηo and τt on M3.4 were derived from the theory of non-linear viscoelasticity with constraints of entanglements for polymer melts and substituted into the Oldroye-Walters-Fredickson constitutive equation. An integral constitutive equation for polymer melts was consequently obtained. Some material functions of the constitutive equation related to certain 'test flow' are examined as follows : (1) simple steady shear flow; (2) steady elongation flow; (3) small-amplitude oscillatory shear flow; (4) stress growth upon the inception of steady shear elongation flow; (5) stress relaxation (modulus and compllance). These theoretical relations for simple steady shear flow were compared with experimental data from our laboratory and references for various polymer melts and concentrated solutions. A good agreement between the theory and experiment was achieved.
文摘In this paper, the inverse problem of the medium parameters in an inhomogeneous medium is studied and a generalized ray approximate form of the total wave field is described. First, the acoustic wave equation derived from the elastic wave equation is studied, the referential variables and perturbational variables are introduced, and the integral equation of the medium perturbational parameters is obtained. Then from the point of view of the local principles of the wave function in an inhomogeneous medium, a generalized ray approximate form of the total wave field in an inhomogeneous medium is described, and attention is focused on the Fredholm integral equation of the first kind. Finally, the medium parameters in half-plane are inversed. Numerical examples show when the perturbations of the medium parameters are about 0.5, this method can effectively inverse its variation. Apparently, this method is better than the conventional Born weak scattering approximation.
文摘X-ray diffraction line profiles of low density polyethylene(LDPE)/ (ethylene-propylene-octene-1)copolymer(EPO)blends have been analyzed with variance range function method.Theories for determining the microparacrystallite size and the distortion parameter from single reflection have been described,and the value of these two parameters at (110)and(200)directions have been determined.
基金financial supported by National Natural Science Foundationof China(No.82001634)the China Postdoctoral Science Foundation(No.2019M661521).
文摘Pericentric inversion of chromosome 9(inv[9])is a common chromosomal structural variant,but its impact on clinical outcomesremains debated.The screening criteria of sperm banks are rarely mentioned to individuals with inv(9).In this study,we evaluatedthe fertility of sperm donors with inv(9)who met eligibility criteria for sperm banks(inv[9]-eligible donors).From March 2004 toMay 2022,chromosomal analysis of 16124 sperm donors at CITIC-Xiangya Human Sperm Bank in Hunan Province(Changsha,China)found that 251(1.6%)had chromosome variations,with inv(9)being the most prevalent at 1.1%.All 169 inv(9)-eligibledonors were contacted to collect fertility outcome data,along with 206 eligible donors without inv(9)as controls.In addition,semen samples from inv(9)-eligible donors and eligible donors underwent assessments of sperm fluorescence in situ hybridization(FISH),mitochondrial membrane potential,DNA fragmentation index,acrosome integrity,reactive oxygen species(ROS),andsperm morphology.Results showed that inv(9)did not significantly increase reproductive risks overall.Despite detecting ROSlevel differences,the clinical impact may be insignificant.This study provides new data on the inv(9)population that can serveas a valuable reference for decision-making by sperm banks as well as for genetic counseling and clinical guidance for individualscarrying inv(9)variant.
文摘This work highlights the unparalleled efficiency of the “n<sup>th</sup>-Order Function/ Feature Adjoint Sensitivity Analysis Methodology for Nonlinear Systems” (n<sup>th</sup>-FASAM-N) by considering the well-known Nordheim-Fuchs reactor dynamics/safety model. This model describes a short-time self-limiting power excursion in a nuclear reactor system having a negative temperature coefficient in which a large amount of reactivity is suddenly inserted, either intentionally or by accident. This nonlinear paradigm model is sufficiently complex to model realistically self-limiting power excursions for short times yet admits closed-form exact expressions for the time-dependent neutron flux, temperature distribution and energy released during the transient power burst. The n<sup>th</sup>-FASAM-N methodology is compared to the extant “n<sup>th</sup>-Order Comprehensive Adjoint Sensitivity Analysis Methodology for Nonlinear Systems” (n<sup>th</sup>-CASAM-N) showing that: (i) the 1<sup>st</sup>-FASAM-N and the 1<sup>st</sup>-CASAM-N methodologies are equally efficient for computing the first-order sensitivities;each methodology requires a single large-scale computation for solving the “First-Level Adjoint Sensitivity System” (1<sup>st</sup>-LASS);(ii) the 2<sup>nd</sup>-FASAM-N methodology is considerably more efficient than the 2<sup>nd</sup>-CASAM-N methodology for computing the second-order sensitivities since the number of feature-functions is much smaller than the number of primary parameters;specifically for the Nordheim-Fuchs model, the 2<sup>nd</sup>-FASAM-N methodology requires 2 large-scale computations to obtain all of the exact expressions of the 28 distinct second-order response sensitivities with respect to the model parameters while the 2<sup>nd</sup>-CASAM-N methodology requires 7 large-scale computations for obtaining these 28 second-order sensitivities;(iii) the 3<sup>rd</sup>-FASAM-N methodology is even more efficient than the 3<sup>rd</sup>-CASAM-N methodology: only 2 large-scale computations are needed to obtain the exact expressions of the 84 distinct third-order response sensitivities with respect to the Nordheim-Fuchs model’s parameters when applying the 3<sup>rd</sup>-FASAM-N methodology, while the application of the 3<sup>rd</sup>-CASAM-N methodology requires at least 22 large-scale computations for computing the same 84 distinct third-order sensitivities. Together, the n<sup>th</sup>-FASAM-N and the n<sup>th</sup>-CASAM-N methodologies are the most practical methodologies for computing response sensitivities of any order comprehensively and accurately, overcoming the curse of dimensionality in sensitivity analysis.
文摘The partial replacement of durum wheat semolina with local flours such as soybeans and yam reduces the dependence of durum wheat semolina for the production of pasta</span><span style="font-family:Verdana;">.</span></span><span style="font-family:""> </span><span style="font-family:Verdana;">The</span><span style="font-family:""><span style="font-family:Verdana;"> main objective of this study is to develop yam flour (A) from Dioscorea alata in the manufacture of pasta made with durum wheat semolina (B) and soy flour (C) (raw materials). The methodology adopted consists first of all in the characterization of yam, soybean </span><span style="font-family:Verdana;">and</span><span style="font-family:Verdana;"> durum wheat semolina. An experimental design was developed to bring out the balanced mixing plan in well-defined proportions with ten (10) tests. Chemical and functional analyzes were carried out on the pastes obtained from these formulations. The functional properties allowed us to determine the optimal mixing plan using a mathematical model. The sensory properties of the optimal compound dough were estimated in comparison with the control doughs. The results on the chemical properties of raw materials A, B </span><span style="font-family:Verdana;">and</span><span style="font-family:Verdana;"> C obtained on the water content vary from 10.29% to 12.29%;those of ashes vary from 0.91% to 5.74% and those of proteins vary from 3.24% to 20.17%. The results of the chemical and functional parameters of compound pasta gave very diverse values. We find that the water content, the ash content, the protein content </span><span style="font-family:Verdana;">and</span><span style="font-family:Verdana;"> the acidity rate of the series of 10 tests are respectively from 6.60% to 14.97%, from 0.97% to 1.67%, from 7.15% to 12.10% </span><span style="font-family:Verdana;">and</span><span style="font-family:Verdana;"> from 1.35% to 3.60%. Regarding the optimal cooking time for this series of 10 tests, it varies from 15 min to 20 min with a swelling index which is between 59.70% and 107.12%. Statistical tests (test F) from the different models indicate that the main regression effects are not significant with a p-value probability greater than 0.05. The models obtained were significant with a good value for the coefficient of determination R</span><sup><span style="font-family:Verdana;">2</span></sup><span style="font-family:Verdana;">. The sensory test approved that optimal compound pasta has good overall acceptability compared to 100% durum wheat pasta. The 20.40% yam flour mixture (102.020 g);55.19% of durum wheat semolina (275.982 g) and 24.39% of soy flour (121.998 g) has good potential in the preparation of compound pasta.
基金supported by National Natural Science Foundation of China(Grant No.11201354)Hubei Province Key Laboratory of Systems Science in Metallurgical Process(Wuhan University of Science and Technology)(Y201321)National Natural Science Foundation of Pre-Research Item(2011XG005)
文摘In this paper, we apply function parameters to real interpolation of Lorentz- Orlicz martingale spaces. Some new interpolation theorems are formulated which generalize some known results in Lorentz spaces An introduced by Sharpley.
基金Projects(51205253,11272205)supported by the National Natural Science Foundation of ChinaProject(2012AA7052005)supported by the National High Technology Research and Development Program of China
文摘A robust H∞ directional controller for a sampled-data autonomous airship with polytopic parameter uncertainties was proposed. By input delay approach, the linearized airship model was transformed into a continuous-time system with time-varying delay. Sufficient conditions were then established based on the constructed Lyapunov-Krasovskii functional, which guarantee that the system is mean-square exponentially stable with H∞ performance. The desired controller can be obtained by solving the obtained conditions. Simulation results show that guaranteed minimum H∞ performance γ=1.4037 and fast response of attitude for sampled-data autonomous airship are achieved in spite of the existence of parameter uncertainties.
基金Project supported by the National Natural Science Foundation of China(Nos.11204257,21233004)the China Postdoctoral Science Foundation(No.2012M511447)
文摘The electronic band structures and band gap bowing parameters of In_xGa_（1-x）N are studied by the firstprinciples method based on the density functional theory. Calculations by employing both the Heyd-ScuseriaErnzerh of hybrid functional（HSE06） and the Perdew-Burke-Ernzerhof（PBE） one are performed. We found that the theoretical band gap bowing parameter is dependent significantly on the calculation method, especially on the exchange-correlation functional employed in the DFT calculations. The band gap of In_xGa_（1-x）N alloy decreases considerably when the In constituent x increases. It is the interactions of s–s and p–p orbitals between anions and cations that play significant roles in formatting the band gaps bowing. In general, the HSE06 hybrid functional could provide a good alternative to the PBE functional in calculating the band gap bowing parameters.
基金supported by a grant from the NIH(No.U42 RR16607)
文摘Objective：A computational model of insulin secretion and glucose metabolism for assisting the diagnosis of diabetes mellitus in clinical research is introduced.The proposed method for the estimation of parameters for a system of ordinary differential equations（ODEs）that represent the time course of plasma glucose and insulin concentrations during glucose tolerance test（GTT）in physiological studies is presented.The aim of this study was to explore how to interpret those laboratory glucose and insulin data as well as enhance the Ackerman mathematical model.Methods：Parameters estimation for a system of ODEs was performed by minimizing the sum of squared residuals（SSR）function,which quantifies the difference between theoretical model predictions and GTT＇s experimental observations.Our proposed perturbation search and multiple-shooting methods were applied during the estimating process.Results：Based on the Ackerman＇s published data,we estimated the key parameters by applying R-based iterative computer programs.As a result,the theoretically simulated curves perfectly matched the experimental data points.Our model showed that the estimated parameters,computed frequency and period values,were proven a good indicator of diabetes.Conclusion：The present paper introduces a computational algorithm to biomedical problems,particularly to endocrinology and metabolism fields,which involves two coupled differential equations with four parameters describing the glucose-insulin regulatory system that Ackerman proposed earlier.The enhanced approach may provide clinicians in endocrinology and metabolism field insight into the transition nature of human metabolic mechanism from normal to impaired glucose tolerance.
基金supported by National Natural Science Foundation under Grant No.50875247Shanxi Province Natural Science Foundation under Grant No.2009011026-1
文摘Panicle swarm optimization （PSO） is an optimization algorithm based on the swarm intelligent principle. In this paper the modified PSO is applied to a kernel principal component analysis （ KPCA ） for an optimal kernel function parameter. We first comprehensively considered within-class scatter and between-class scatter of the sample features. Then, the fitness function of an optimized kernel function parameter is constructed, and the particle swarm optimization algorithm with adaptive acceleration （CPSO） is applied to optimizing it. It is used for gearbox condi- tion recognition, and the result is compared with the recognized results based on principal component analysis （PCA）. The results show that KPCA optimized by CPSO can effectively recognize fault conditions of the gearbox by reducing bind set-up of the kernel function parameter, and its results of fault recognition outperform those of PCA. We draw the conclusion that KPCA based on CPSO has an advantage in nonlinear feature extraction of mechanical failure, and is helpful for fault condition recognition of complicated machines.
文摘[Objectives] To determine the protective effect of Shenfu injection( SFI) on chronic heart failure( CHF) in rats induced by doxorubicin. [Methods] CHF was induced by doxorubicin via intraperitoneal injection in rats. The cardiac function parameters,the heart index,the serum brain natriuretic peptide( BNP) level and cardiac histopathology were measured 4 weeks after Shenfu injection treatment. [Results]Shenfu injection remarkably improved the heart index and cardiac histopathology,increased the heart rate( HR),left ventricular systolic pressure( LVSP),maximum rising rate of left ventricular pressure( + dp/dtmax) and dropping rate of left ventricular pressure(-dp/dtmax),reduced the left ventricular end-diastolic pressure( LVEDP) and serum BNP level of rats with CHF induced by doxorubicin. [Conclusions]Shenfu injection exerts protective effect on CHF induced by doxorubicin.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11174117 and 10974078)the Program for Scientific Research Innova-tion Team in Colleges and Universities of Shandong Province,China
文摘The potential energy curves （PECs） of the 3Π states of GaX （X=F, Cl, and Br） molecules are calculated using the multireference configuration interaction method with a large contracted basis set aug-cc-pV5Z. The PECs are accurately fitted to analytical potential energy functions （APEFs） using the Murrell–Sorbie potential function. The spectroscopic parameters for the states are determined using the obtained APEFs, and compared with the theoretical and experimental data available presently in the literature.
文摘The relocity and sirain-rate .field which are different from Avilzur's have beenestablished in Caitesian coordinates. Using the integral as a function of the upper limitand integration depending on a parameler, an analylical upper-bound solution todrawing stress through idling rolls has been obtained in this paper.
基金supported by the National Natural Science Foundation of China (Nos. 10974078,10674114,and 10874104)the Research Fund for the Doctoral Program of Higher Education of China (No.20093704110001)
文摘Multi-reference configuration interaction is used to produce potential energy curves （PECs） for the excited B1FI state of KH molecule. To investigate the correlation effect of core-valence electrons, five schemes are employed which include the different correlated electrons and different active spaces. The PECs are fitted into analytical potential energy functions （APEFs）. The spectroscopic parameters, ro-vibrational levels, and transition frequencies are determined based on the APEFs and compared with available experimental and theoretical data. The molecular properties for B1II obtained in this letter, which are better than those available in literature, can be reproduced with calculations using the suitable correlated electrons and active space of orbitals.
基金supported by the National Natural Science Foundation of China (Grant No. 51279057)the Major Program of National Natural Science Foundation of China (Grant Nos. 51190090 and 51190091)+1 种基金the Ph.D. Programs Foundation of Ministry of Education of China (Grant No.20120094120018)the Fundamental Research Funds for the Central Universities of China (Grant No. 2012B00214)
文摘By analyzing the structure of the objective function based on error sum of squares and the information provided by the objective function, the essential problems in the current parameter estimation methods are summarized: (1) the information extracted from the objective function based on error sum of squares is unreasonable or even wrong for parameter estimation; and (2) the surface of the objective function based on error sum of squares is more complex than that of the parameter function, which indicates that the optimal parameter values should be searched on the surface of the parameter function instead of the objective function. This paper proposes the concept of sample intersection and demonstrates the uniqueness theorem of intersection point (namely the uniqueness of optimal parameter values). According to the characteristics of parameter function surface and Taylor series expansion, a parameter estimation method based on the sample intersection information extracted from parameter function surface (PFS method) was constructed. The results of theoretical analysis and practical application show that the proposed PFS method can avoid the problems in the current automatic parameter calibration, and has fast convergence rate and good performance in parameter calibration.
基金supported by National Natural Science Foundation of China(Grant No. 11171015)
文摘In this paper,we apply function parameters,introduced by Persson,to real interpolation of Lorentz martingale spaces.Some new interpolation theorems concerning Lorentz martingale spaces are formulated.The results that we obtain generalize some fundamental interpolation theorems in classical martingale Hp theory.
基金Supported by the Research Unit Matemática e Aplicac■s (UIMA) of University of Aveiro, Portugal
文摘Hardy spaces with generalized parameter are introduced following the maximal characterization approach. As particular cases, they include the classical Hp spaces and the Hardy-Lorentz spaces H^p,q. Real interpolation results with function parameter are obtained, Based on them, the behavior of some classical operators is studied in this generalized setting.
