Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.B...Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.展开更多
Fe-Mo functionally graded materials(FGMs)with different composition-change rates from 100%304 stainless steel to 100%Mo along the composition gradient direction were prepared by electron beam-directed energy depositio...Fe-Mo functionally graded materials(FGMs)with different composition-change rates from 100%304 stainless steel to 100%Mo along the composition gradient direction were prepared by electron beam-directed energy deposition(EB-DED)technique,including three samples with composition mutation of 100%,composition change rate of 10%and 30%.Results show that the composition-change rate significantly affects the microstructure and mechanical properties of the samples.In the sample with abrupt change of composition,the sharp shift in composition between 304 stainless steel and Mo leads to a great difference in the microstructure and hardness near the interface between the two materials.With the increase in the number of gradient layers,the composition changes continuously along the direction of deposition height,and the microstructure morphology shows a smooth transition from 304 stainless steel to Mo,which is gradually transformed from columnar crystal to dendritic crystal.Elements Fe,Mo,and other major elements transform linearly along the gradient direction,with sufficient interlayer diffusion between the deposited layers,leading to good metallurgical bonding.The smaller the change in composition gradient,the greater the microhardness value along the deposition direction.When the composition gradient is 10%,the gradient layer exhibits higher hardness(940 HV)and excellent resistance to surface abrasion,and the overall compressive properties of the samples are better,with the compressive fracture stress in the top region reaching 750.05±14 MPa.展开更多
SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+...SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.展开更多
Mechanical loading constitutes a fundamental determinant in the process of bone remodeling.This modeling encompasses the incorporation of mechanical stimuli,the involvement of cellular and molecular constituents,as we...Mechanical loading constitutes a fundamental determinant in the process of bone remodeling.This modeling encompasses the incorporation of mechanical stimuli,the involvement of cellular and molecular constituents,as well as the utilization of sophisticated computational methodologies.Such an approach is imperative for forecasting bone behaviour across varying environmental conditions.In the present study,key findings from bone mechanobiology are reviewed,along with the possibility that Functionally Graded Materials(FGM)enhances osseointegration and lowers the stress-shielding effect during bone remodeling and compared to titanium,FGM improves periprosthetic bone remodeling.To summarise some of the most important findings from computational models of bone mechanobiology,explaining how modifications to the mechanical environment affect implant design,growth of bone,and bone response.The impact that changes related to the mechanical environment have on bone response is examined using computational models and methods such as surface microtopography to determine how an implant’s bone density has increased over time.This review focuses on the refinement of advanced simulation frameworks and their synergy with imaging technologies to strengthen model validation,ultimately resulting in better clinical outcomes in the context of bone health treatments.展开更多
Intracellular polymerization is an emerging field,showcasing high diversity and efficiency of chemistry.Motivated by the principles of natural biomolecular synthesis,polymerization within living cells is believed to b...Intracellular polymerization is an emerging field,showcasing high diversity and efficiency of chemistry.Motivated by the principles of natural biomolecular synthesis,polymerization within living cells is believed to be a powerful and versatile tool to modulate cell behavior.In this review,we summarized recent advances and future trends in the field of intracellular polymerization,specifically focusing on covalent and supramolecular polymerization.This discussion comprehensively covers the diverse chemical designs,reaction mechanisms,responsive features,and functional applications.Furthermore,we also clarified the connection between preliminary design of polymer synthesis and their subsequent biological applications.We hope this review will serve as an innovative platform for chemists and biologists to regulate biological functions in practical applications and clinical trials.展开更多
Functionally graded materials (FGMs) are innovative materials distinguished by gradual variations in composition and structure, offering exceptional properties for diverse applications. Poly(ionic liquid)s (PILs), mer...Functionally graded materials (FGMs) are innovative materials distinguished by gradual variations in composition and structure, offering exceptional properties for diverse applications. Poly(ionic liquid)s (PILs), merging the characteristics of polymers and ionic liquids, have emerged as viable options for the development of FGMs given their tunable skeleton, ionic conductivity, and compatibility with various functional materials. This review highlights the latest advancements in the design strategies of FGMs based on porous PILs, focusing on single and multi-gradient structures. Furthermore, we also highlight their emerging applications in molecular recognition, sensing, adsorption, separation, and catalysis. By exploring the interplay between porosity, ionic functionality, and gradient architecture, this review offers perspectives on the prospects of PIL-based FGMs for tackling global challenges in energy, environment, and healthcare.展开更多
Artificial intelligence(AI)is emerging as a transformative enabler in the development of smart textile systems,particularly those integrating powder-based functional materials.This review highlights recent progress in...Artificial intelligence(AI)is emerging as a transformative enabler in the development of smart textile systems,particularly those integrating powder-based functional materials.This review highlights recent progress in AIguided design of carbon nanomaterials,metallic nanoparticles,and framework-based powders for applications in energy harvesting,intelligent sensing,and robotic actuation.Machine learning techniques,including supervised learning,transfer learning,and Bayesian optimization are discussed for accelerating materials discovery,enhancing integration strategies,and enabling real-time adaptive control.Emphasis is placed on how AI enables multifunctional,wearable platforms that sense,process,and respond to environmental and physiological cues with high accuracy and autonomy.Representative breakthroughs in soft robotics,haptic interfaces,and assistive devices are presented,demonstrating the synergy of AI and responsive textiles.Finally,the review outlines key challenges related to data scarcity,model generalizability,manufacturing scalability,and sustainability,while proposing future directions involving multimodal learning,autonomous experimentation,and ethics-aware design.This work offers a comprehensive outlook on next-generation AI-driven textile systems that seamlessly integrate intelligence,functionality,and wearability.展开更多
This study focuses on permanent surface dislocations caused by a strike-slip fault in an alluvial valley.A twodimensional mathematical model is utilized,considering the valley to have a half-cylindrical shape.The vall...This study focuses on permanent surface dislocations caused by a strike-slip fault in an alluvial valley.A twodimensional mathematical model is utilized,considering the valley to have a half-cylindrical shape.The valley medium is assumed to be isotropic,linear elastic and nonhomogeneous,such that the shear modulus of the valley has spatial dependency.The valley is surrounded by an isotropic,linear elastic and homogeneous half-space.A strike-slip fault is located at the intersection between the valley and the half-space.The problem is solved analytically by using finite Fourier transform.Displacement functions are obtained in closed-form,in terms of power series and hypergeometric function series.Unknown coefficients of these series are determined from the boundary conditions,leading to an analytical exact solution.Numerical results indicate that the nonhomogeneity of the alluvial valley material has a limited impact on permanent surface dislocations unless there is a significant variation in the material properties within the functionally graded zone.In many cases,approximating the nonhomogeneous alluvial valley as a homogeneous medium is suitable.展开更多
Functionally graded material(FGM)plates are widely used in various engineering structures owing to their tailor-made mechanical properties,whereas cracked homogeneous plates constitute a canonical setting in fracture ...Functionally graded material(FGM)plates are widely used in various engineering structures owing to their tailor-made mechanical properties,whereas cracked homogeneous plates constitute a canonical setting in fracture mechanics analysis.These two classes of problems respectively embody material non-uniformity and geometric discontinuity,thereby imposing more stringent requirements on numerical methods in terms of high-order field continuity and accurate defect representation.Based on the classical Kirchhoff-Love plate theory,a numerical manifold method(MLS-NMM)incorporating moving least squares(MLS)interpolation is developed for bending analysis of FGM plates and fracture simulation of homogeneous plates with defects.The method constructs an H^(2)-regular approximation with high-order continuous weighting functions and,combined with the separation of mathematical and physical covers,establishes a unified framework that accurately handles material gradients and cracks without mesh reconstruction.For the crack tip,a singular physical cover incorporating the Williams asymptotic field is introduced to achieve local enrichment,enabling the natural capture of displacement discontinuity and stress singularity.Stress intensity factors are extracted using the interaction integral method,and the dimensionless J-integral shows a maximum relative error below 1.2%compared with the reference solution.Numerical results indicate that MLS-NMM exhibits excellent convergence performance:using 676 mathematical nodes,the nondimensional central deflection of both FGM and homogeneous plates agrees with reference solutions with a maximum relative error below 0.81%,and no shear locking occurs.A systematic analysis reveals that for a simply supported on all four edges(SSSS)FGM square plate with a/h=10,the nondimensional central deflection increases by 212%as the gradient index nrises from 0 to 5.For a homogeneous plate containing a central crack with c/a=0.6,the nondimensional central deflection increases by approximately 46%compared with the intact plate.Under weak boundary constraints(e.g.,SFSF),the deformation is markedly amplified,with the deflection reaching more than three times that under strong constraints(SCSC).The proposed method provides an efficient,reconstruction-free numerical tool for high-accuracy bending and fracture analyses of FGM and cracked thin-plate structures.展开更多
The accurate mechanical analysis of thick-walled pressure vessel structures composed of advanced materials,such as hyperelastic and functionally graded materials(FGMs),is critical for ensuring their safety and optimiz...The accurate mechanical analysis of thick-walled pressure vessel structures composed of advanced materials,such as hyperelastic and functionally graded materials(FGMs),is critical for ensuring their safety and optimizing their design.However,conventional numerical methods can face challenges with the non-linearities inherent in hyperelasticity and the complex spatial variations in FGMs.This paper presents a novel hybrid numerical approach combining Physics-Informed Neural Networks(PINNs)with Finite Element Method(FEM)derived data for the robust analysis of thick-walled,axisymmetric,heterogeneous,hyperelastic pressure vessels with elliptical geometries.A PINN framework incorporating neo-Hookean constitutive relations is developed in MATLAB.To enhance training efficiency and accuracy,the PINN’s loss function is augmented with displacement data obtained from high-fidelity FEM simulations performed in ANSYS.The methodology is rigorously validated by comparing PINN-predicted displacement and von Mises stress fields against ANSYS benchmarks for various scenarios of FGMconfigurations(with material properties varying according to a power law)subjected to internal and external pressurization.The results demonstrate excellent agreement between the proposed hybrid PINN-FEMapproach and conventional FEMsolutions across all test cases,accurately capturing complex deformation patterns and stress concentrations.This study highlights the potential of data-augmented PINNs as an effective and accurate computational tool for tackling complex solid mechanics problems involving non-linearmaterials and significant heterogeneity,offering a promising avenue for future research in engineering design and analysis.展开更多
Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic producti...Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic production techniques for manufacturing functionally graded materials. Attention is paid to the principles for obtaining graded structure mainly in the metal based functionally graded materials. Several unpublished results obtained by the authors have been discussed briefly. Experimental methods and theoretical analysis for qualitative and quantitative estimation of graded properties have also been presented. The article can be useful for people who work in the field of functionally graded structures and materials, and who need a compact informative review of recent experimental and theoretical activity in this area.展开更多
Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Labor...Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Laboratory of Chemical Resource Engineering in Beiiing University of Chemical Technology, the orinciole for the design of controlled intercalation processes in the light of tuture production processing requirements has been developed. Intercalation assembly methods and technologies have been invented to control the intercalation process for preparing layered intercalated materials with various structures and functions.展开更多
The synthetic routes of porous carbons and the applications of the functional porous carbon-based composite electrode materials for lithium secondary batteries are reviewed. The synthetic methods have made great break...The synthetic routes of porous carbons and the applications of the functional porous carbon-based composite electrode materials for lithium secondary batteries are reviewed. The synthetic methods have made great breakthroughs to control the pore size and volume, wall thickness, surface area, and connectivity of porous carbons, which result in the development of functional porous carbon-based composite electrode materials. The effects of porous carbons on the electrochemical properties are further discussed. The porous carbons as ideal matrixes to incorporate active materials make a great improvement on the electrochemical properties because of high surface area and pore volume, excellent electronic conductivity, and strong adsorption capacity. Large numbers of the composite electrode materials have been used for the devices of electrochemical energy conversion and storage, such as lithium-ion batteries （LIBs）, Li-S batteries, and Li-O2 batteries. It is believed that functional porous carbon-based composite electrode materials will continuously contribute to the field of lithium secondary batteries.展开更多
Cellulose is one of the most abundant natural polymers in the nature,which has many attractive advantages,such as renewability,biodegradability,and biocompatibility.However,due to the strong hydrogen bond network and ...Cellulose is one of the most abundant natural polymers in the nature,which has many attractive advantages,such as renewability,biodegradability,and biocompatibility.However,due to the strong hydrogen bond network and hierarchical structure,cellulose is extremely difficult to be dissolved and processed.More recently,a class of novel eco-friendly solvents,ionic liquids,have been found to be able to efficiently dissolve cellulose,providing a versatile platform for cellulose processing and functionalization.Herein,we highlight recent advances in efficiently fabricating functional cellulose derivatives via the homogeneous chemical modification and developing all-biomass materials via controlling the dissolution-regeneration process in ionic liquids.The effective and environmentally-friendly utilization of cellulose not only reduces dependence on fossil resources but also protects the environment.展开更多
Functionally graded material(FGM)can tailor properties of components such as wear resistance,corrosion resistance,and functionality to enhance the overall performance.The selective laser melting(SLM)additive manufactu...Functionally graded material(FGM)can tailor properties of components such as wear resistance,corrosion resistance,and functionality to enhance the overall performance.The selective laser melting(SLM)additive manufacturing highlights the capability in manufacturing FGMs with a high geometrical complexity and manufacture flexibility.In this work,the 316L/CuSn10/18Ni300/CoCr four-type materials FGMs were fabricated using SLM.The microstructure and properties of the FGMs were investigated to reveal the effects of SLM processing parameters on the defects.A large number of microcracks were found at the 316L/CuSn10 interface,which initiated from the fusion boundary of 316L region and extended along the building direction.The elastic modulus and nano-hardness in the 18Ni300/CoCr fusion zone decreased significantly,less than those in the 18Ni300 region or the CoCr region.The iron and copper elements were well diffused in the 316L/CuSn10 fusion zone,while elements in the CuSn10/18Ni300 and the 18Ni300/CoCr fusion zones showed significantly gradient transitions.Compared with other regions,the width of the CuSn10/18Ni300 interface and the CuSn10 region expand significantly.The mechanisms of materials fusion and crack generation at the 316L/CuSn10 interface were discussed.In addition,FGM structures without macro-crack were built by only altering the deposition subsequence of 316L and CuSn10,which provides a guide for the additive manufacturing of FGM structures.展开更多
Micro/nanostructured crystals with controlled architectures are desirable for many applications in optics, electronics, biology, medicine, and energy conversions. Low-temperature, aqueous chemical routes have been wid...Micro/nanostructured crystals with controlled architectures are desirable for many applications in optics, electronics, biology, medicine, and energy conversions. Low-temperature, aqueous chemical routes have been widely investigated for the synthesis of particles, and arrays of oriented nanorods and nanotubes. In this paper, based on the ideal crystal shapes predicted by the chemical bonding theory, we have developed some potential chemical strategies to tune the microstructure of functional materials, ZnS and Nb205 nanotube arrays, MgO wiskers and nestlike spheres, and cubic phase Cu2O microcrystals were synthesized here to elucidate these strategies. We describe their controlled crystallization processes and illustrate the detailed key factors controlling their growth by examining various reaction parameters. Current results demonstrate that our designed chemical strategies for tuning microstructure of functional materials are applicable to several technologically important materials, and therefore may be used as a versatile and effective route to the controllable synthesis of other inorganic functional materials.展开更多
In this paper,the dynamic interaction of two parallel cracks in functionally graded materials(FGMs)is investigated by means of the non-local theory.To make the analysis tractable,the shear modulus and the material den...In this paper,the dynamic interaction of two parallel cracks in functionally graded materials(FGMs)is investigated by means of the non-local theory.To make the analysis tractable,the shear modulus and the material density are assumed to vary exponentially with the coordinate vertical to the crack.To reduce mathematical difficulties,a one-dimensional non-local kernel is used instead of a twodimensional one for the dynamic problem to obtain stress fields near the crack tips.By use of the Fourier transform,the problem can be solved with the help of two pairs of dual integral equations,in which the unknown variables are the jumps of displacements across the crack surfaces.To solve the dual integral equations,the jumps of displacements across the crack surfaces are expanded in a series of Jacobi polynomials.Unlike the classical elasticity solutions,it is found that no stress singularity is present at the crack tips.The non-local elastic solutions yield a finite hoop stress at the crack tips.The present result provides theoretical references helpful for evaluating relevant strength and preventing material failure of FGMs with initial cracks.The magnitude of the finite stress field depends on relevant parameters,such as the crack length,the distance between two parallel cracks,the parameter describing the FGMs,the frequency of the incident waves and the lattice parameter of materials.展开更多
The mechanism of chloride ion penetration in high performance concrete was analy zed. The experimental results indicate that there are two important reasons that influence the anti-chloride penetration of high perfor...The mechanism of chloride ion penetration in high performance concrete was analy zed. The experimental results indicate that there are two important reasons that influence the anti-chloride penetration of high performance concrete. One is the function effect of mineral functional material, so that it increases conc rete's capability to resist chloride ion penetration. The other is combined acti on of mineral functional material's original capability of binding the chloride ion (physical adsorption) and physicochemical adsorption after hydration.展开更多
The great potential of liquid-crystalline block copolymers(LCBCs)containing photoresponsive mesogens toward novel applications in photonics and nanotechnology has been attracting increasing attention,due to the combin...The great potential of liquid-crystalline block copolymers(LCBCs)containing photoresponsive mesogens toward novel applications in photonics and nanotechnology has been attracting increasing attention,due to the combination of the inherent property of microphase separation of block copolymers and the hierarchically-assembled structures of liquid-crystalline polymers(LCPs).The periodically ordered nanostructures in bulk film of LCBCs can be acquired by supramolecular cooperative motion,derived from the interaction between liquid-crystalline elastic deformation and microphase separation,which are able to improve physical properties of polymer film toward advanced functional applications.Moreover,various micro/nano-patterned structures have been fabricated via light manipulation of photoresponsive LCBCs with good reproducibility and mass production.Thanks to recent developments in synthesis and polymerization techniques,diverse azobenzene-containing LCBCs have been designed,resulting in the creation of a wide variety of novel functions.This review illustrates recent progresses in macroscopic regulation of hierarchical nanostructures in LCBCs towards functional materials.The existing challenges are also discussed,showing perspectives for future studies.展开更多
基金supported by the National Natural Science Foundation of China(52276196)the Foundation of State Key Laboratory of Coal Combustion(FSKLCCA2508)the High-level Talent Foundation of Anhui Agricultural University(rc412307).
文摘Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.
基金National Natural Science Foundation of China(51975286)。
文摘Fe-Mo functionally graded materials(FGMs)with different composition-change rates from 100%304 stainless steel to 100%Mo along the composition gradient direction were prepared by electron beam-directed energy deposition(EB-DED)technique,including three samples with composition mutation of 100%,composition change rate of 10%and 30%.Results show that the composition-change rate significantly affects the microstructure and mechanical properties of the samples.In the sample with abrupt change of composition,the sharp shift in composition between 304 stainless steel and Mo leads to a great difference in the microstructure and hardness near the interface between the two materials.With the increase in the number of gradient layers,the composition changes continuously along the direction of deposition height,and the microstructure morphology shows a smooth transition from 304 stainless steel to Mo,which is gradually transformed from columnar crystal to dendritic crystal.Elements Fe,Mo,and other major elements transform linearly along the gradient direction,with sufficient interlayer diffusion between the deposited layers,leading to good metallurgical bonding.The smaller the change in composition gradient,the greater the microhardness value along the deposition direction.When the composition gradient is 10%,the gradient layer exhibits higher hardness(940 HV)and excellent resistance to surface abrasion,and the overall compressive properties of the samples are better,with the compressive fracture stress in the top region reaching 750.05±14 MPa.
文摘SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.
文摘Mechanical loading constitutes a fundamental determinant in the process of bone remodeling.This modeling encompasses the incorporation of mechanical stimuli,the involvement of cellular and molecular constituents,as well as the utilization of sophisticated computational methodologies.Such an approach is imperative for forecasting bone behaviour across varying environmental conditions.In the present study,key findings from bone mechanobiology are reviewed,along with the possibility that Functionally Graded Materials(FGM)enhances osseointegration and lowers the stress-shielding effect during bone remodeling and compared to titanium,FGM improves periprosthetic bone remodeling.To summarise some of the most important findings from computational models of bone mechanobiology,explaining how modifications to the mechanical environment affect implant design,growth of bone,and bone response.The impact that changes related to the mechanical environment have on bone response is examined using computational models and methods such as surface microtopography to determine how an implant’s bone density has increased over time.This review focuses on the refinement of advanced simulation frameworks and their synergy with imaging technologies to strengthen model validation,ultimately resulting in better clinical outcomes in the context of bone health treatments.
基金financially supported by the National Key R&D Program of China(No.2023YFA0915300)the National Natural Science Foundation of China(Nos.52233012,22405212 and22471219)the Funds for Creative Research Groups of China of the National Natural Science Foundation of China(No.21821001)。
文摘Intracellular polymerization is an emerging field,showcasing high diversity and efficiency of chemistry.Motivated by the principles of natural biomolecular synthesis,polymerization within living cells is believed to be a powerful and versatile tool to modulate cell behavior.In this review,we summarized recent advances and future trends in the field of intracellular polymerization,specifically focusing on covalent and supramolecular polymerization.This discussion comprehensively covers the diverse chemical designs,reaction mechanisms,responsive features,and functional applications.Furthermore,we also clarified the connection between preliminary design of polymer synthesis and their subsequent biological applications.We hope this review will serve as an innovative platform for chemists and biologists to regulate biological functions in practical applications and clinical trials.
基金support provided by National Natural Science Foundation of China(22471018,22071008,22208018)support provided by the Shenzhen Science and Technology Program(JCYJ20220818100012025).
文摘Functionally graded materials (FGMs) are innovative materials distinguished by gradual variations in composition and structure, offering exceptional properties for diverse applications. Poly(ionic liquid)s (PILs), merging the characteristics of polymers and ionic liquids, have emerged as viable options for the development of FGMs given their tunable skeleton, ionic conductivity, and compatibility with various functional materials. This review highlights the latest advancements in the design strategies of FGMs based on porous PILs, focusing on single and multi-gradient structures. Furthermore, we also highlight their emerging applications in molecular recognition, sensing, adsorption, separation, and catalysis. By exploring the interplay between porosity, ionic functionality, and gradient architecture, this review offers perspectives on the prospects of PIL-based FGMs for tackling global challenges in energy, environment, and healthcare.
基金supported by the National Natural Science Foundation of China(No.52373085,52573090 and U21A2095)Department of Science and Technology of Hubei Province(No.2025CSA001 and 2024CSA076),Outstanding Young and Middle-aged Scientific and Technology Innovation Team of Higher Education Institutions of Hubei Province(No.T2024010),Natural Science Foundation of Hubei Province(No.2023AFA828 and 2024AFB238)+2 种基金Innovative Team Program of Natural Science Foundation of Hubei Province(2023AFA027)Open Fund for Hubei Integrative Technology and Innovation Center for Advanced Fiberous Materials(XC202517)National Local Joint Laboratory for Advanced Textile Processing and Clean Production(FX20240005).
文摘Artificial intelligence(AI)is emerging as a transformative enabler in the development of smart textile systems,particularly those integrating powder-based functional materials.This review highlights recent progress in AIguided design of carbon nanomaterials,metallic nanoparticles,and framework-based powders for applications in energy harvesting,intelligent sensing,and robotic actuation.Machine learning techniques,including supervised learning,transfer learning,and Bayesian optimization are discussed for accelerating materials discovery,enhancing integration strategies,and enabling real-time adaptive control.Emphasis is placed on how AI enables multifunctional,wearable platforms that sense,process,and respond to environmental and physiological cues with high accuracy and autonomy.Representative breakthroughs in soft robotics,haptic interfaces,and assistive devices are presented,demonstrating the synergy of AI and responsive textiles.Finally,the review outlines key challenges related to data scarcity,model generalizability,manufacturing scalability,and sustainability,while proposing future directions involving multimodal learning,autonomous experimentation,and ethics-aware design.This work offers a comprehensive outlook on next-generation AI-driven textile systems that seamlessly integrate intelligence,functionality,and wearability.
文摘This study focuses on permanent surface dislocations caused by a strike-slip fault in an alluvial valley.A twodimensional mathematical model is utilized,considering the valley to have a half-cylindrical shape.The valley medium is assumed to be isotropic,linear elastic and nonhomogeneous,such that the shear modulus of the valley has spatial dependency.The valley is surrounded by an isotropic,linear elastic and homogeneous half-space.A strike-slip fault is located at the intersection between the valley and the half-space.The problem is solved analytically by using finite Fourier transform.Displacement functions are obtained in closed-form,in terms of power series and hypergeometric function series.Unknown coefficients of these series are determined from the boundary conditions,leading to an analytical exact solution.Numerical results indicate that the nonhomogeneity of the alluvial valley material has a limited impact on permanent surface dislocations unless there is a significant variation in the material properties within the functionally graded zone.In many cases,approximating the nonhomogeneous alluvial valley as a homogeneous medium is suitable.
基金supported by Beijing Natural Science Foundation(L233025)。
文摘Functionally graded material(FGM)plates are widely used in various engineering structures owing to their tailor-made mechanical properties,whereas cracked homogeneous plates constitute a canonical setting in fracture mechanics analysis.These two classes of problems respectively embody material non-uniformity and geometric discontinuity,thereby imposing more stringent requirements on numerical methods in terms of high-order field continuity and accurate defect representation.Based on the classical Kirchhoff-Love plate theory,a numerical manifold method(MLS-NMM)incorporating moving least squares(MLS)interpolation is developed for bending analysis of FGM plates and fracture simulation of homogeneous plates with defects.The method constructs an H^(2)-regular approximation with high-order continuous weighting functions and,combined with the separation of mathematical and physical covers,establishes a unified framework that accurately handles material gradients and cracks without mesh reconstruction.For the crack tip,a singular physical cover incorporating the Williams asymptotic field is introduced to achieve local enrichment,enabling the natural capture of displacement discontinuity and stress singularity.Stress intensity factors are extracted using the interaction integral method,and the dimensionless J-integral shows a maximum relative error below 1.2%compared with the reference solution.Numerical results indicate that MLS-NMM exhibits excellent convergence performance:using 676 mathematical nodes,the nondimensional central deflection of both FGM and homogeneous plates agrees with reference solutions with a maximum relative error below 0.81%,and no shear locking occurs.A systematic analysis reveals that for a simply supported on all four edges(SSSS)FGM square plate with a/h=10,the nondimensional central deflection increases by 212%as the gradient index nrises from 0 to 5.For a homogeneous plate containing a central crack with c/a=0.6,the nondimensional central deflection increases by approximately 46%compared with the intact plate.Under weak boundary constraints(e.g.,SFSF),the deformation is markedly amplified,with the deflection reaching more than three times that under strong constraints(SCSC).The proposed method provides an efficient,reconstruction-free numerical tool for high-accuracy bending and fracture analyses of FGM and cracked thin-plate structures.
文摘The accurate mechanical analysis of thick-walled pressure vessel structures composed of advanced materials,such as hyperelastic and functionally graded materials(FGMs),is critical for ensuring their safety and optimizing their design.However,conventional numerical methods can face challenges with the non-linearities inherent in hyperelasticity and the complex spatial variations in FGMs.This paper presents a novel hybrid numerical approach combining Physics-Informed Neural Networks(PINNs)with Finite Element Method(FEM)derived data for the robust analysis of thick-walled,axisymmetric,heterogeneous,hyperelastic pressure vessels with elliptical geometries.A PINN framework incorporating neo-Hookean constitutive relations is developed in MATLAB.To enhance training efficiency and accuracy,the PINN’s loss function is augmented with displacement data obtained from high-fidelity FEM simulations performed in ANSYS.The methodology is rigorously validated by comparing PINN-predicted displacement and von Mises stress fields against ANSYS benchmarks for various scenarios of FGMconfigurations(with material properties varying according to a power law)subjected to internal and external pressurization.The results demonstrate excellent agreement between the proposed hybrid PINN-FEMapproach and conventional FEMsolutions across all test cases,accurately capturing complex deformation patterns and stress concentrations.This study highlights the potential of data-augmented PINNs as an effective and accurate computational tool for tackling complex solid mechanics problems involving non-linearmaterials and significant heterogeneity,offering a promising avenue for future research in engineering design and analysis.
文摘Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic production techniques for manufacturing functionally graded materials. Attention is paid to the principles for obtaining graded structure mainly in the metal based functionally graded materials. Several unpublished results obtained by the authors have been discussed briefly. Experimental methods and theoretical analysis for qualitative and quantitative estimation of graded properties have also been presented. The article can be useful for people who work in the field of functionally graded structures and materials, and who need a compact informative review of recent experimental and theoretical activity in this area.
基金Supported by the National Key Technologies R＆D Program （2011BAE28B01） and the National Natural Science Foundation of China （21276016）.
文摘Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Laboratory of Chemical Resource Engineering in Beiiing University of Chemical Technology, the orinciole for the design of controlled intercalation processes in the light of tuture production processing requirements has been developed. Intercalation assembly methods and technologies have been invented to control the intercalation process for preparing layered intercalated materials with various structures and functions.
基金supported by the Programs of National 973 (2011CB935900)NSFC (51231003 and 21231005)+1 种基金111 Project (B12015)Tianjin High-Tech (10SYSYJC27600)
文摘The synthetic routes of porous carbons and the applications of the functional porous carbon-based composite electrode materials for lithium secondary batteries are reviewed. The synthetic methods have made great breakthroughs to control the pore size and volume, wall thickness, surface area, and connectivity of porous carbons, which result in the development of functional porous carbon-based composite electrode materials. The effects of porous carbons on the electrochemical properties are further discussed. The porous carbons as ideal matrixes to incorporate active materials make a great improvement on the electrochemical properties because of high surface area and pore volume, excellent electronic conductivity, and strong adsorption capacity. Large numbers of the composite electrode materials have been used for the devices of electrochemical energy conversion and storage, such as lithium-ion batteries （LIBs）, Li-S batteries, and Li-O2 batteries. It is believed that functional porous carbon-based composite electrode materials will continuously contribute to the field of lithium secondary batteries.
基金the Youth Innovation Promotion Association CAS(No.2018040)the National Natural Science Foundation of China(Nos.U2004211 and 52173292).
文摘Cellulose is one of the most abundant natural polymers in the nature,which has many attractive advantages,such as renewability,biodegradability,and biocompatibility.However,due to the strong hydrogen bond network and hierarchical structure,cellulose is extremely difficult to be dissolved and processed.More recently,a class of novel eco-friendly solvents,ionic liquids,have been found to be able to efficiently dissolve cellulose,providing a versatile platform for cellulose processing and functionalization.Herein,we highlight recent advances in efficiently fabricating functional cellulose derivatives via the homogeneous chemical modification and developing all-biomass materials via controlling the dissolution-regeneration process in ionic liquids.The effective and environmentally-friendly utilization of cellulose not only reduces dependence on fossil resources but also protects the environment.
基金Project(2020B090922002)supported by Guangdong Provincial Key Field Research and Development Program,ChinaProjects(51875215,52005189)supported by the National Natural Science Foundation of ChinaProject(2019B1515120094)supported by Guangdong Provincial Basic and Applied Basic Research Fund,China。
文摘Functionally graded material(FGM)can tailor properties of components such as wear resistance,corrosion resistance,and functionality to enhance the overall performance.The selective laser melting(SLM)additive manufacturing highlights the capability in manufacturing FGMs with a high geometrical complexity and manufacture flexibility.In this work,the 316L/CuSn10/18Ni300/CoCr four-type materials FGMs were fabricated using SLM.The microstructure and properties of the FGMs were investigated to reveal the effects of SLM processing parameters on the defects.A large number of microcracks were found at the 316L/CuSn10 interface,which initiated from the fusion boundary of 316L region and extended along the building direction.The elastic modulus and nano-hardness in the 18Ni300/CoCr fusion zone decreased significantly,less than those in the 18Ni300 region or the CoCr region.The iron and copper elements were well diffused in the 316L/CuSn10 fusion zone,while elements in the CuSn10/18Ni300 and the 18Ni300/CoCr fusion zones showed significantly gradient transitions.Compared with other regions,the width of the CuSn10/18Ni300 interface and the CuSn10 region expand significantly.The mechanisms of materials fusion and crack generation at the 316L/CuSn10 interface were discussed.In addition,FGM structures without macro-crack were built by only altering the deposition subsequence of 316L and CuSn10,which provides a guide for the additive manufacturing of FGM structures.
基金the financial support of the program for the New Century Excellent Talents in University(Grant No.NCET-05-0278)the National Natural Science Foundation of China(Grant No.20471012)+1 种基金the Foundation for the Author of National Excellent Doctoral Dissertation of China(Grant No.200322)the Research Fund for the Doctoral Program of Higher Education(Grant No.20040141004).
文摘Micro/nanostructured crystals with controlled architectures are desirable for many applications in optics, electronics, biology, medicine, and energy conversions. Low-temperature, aqueous chemical routes have been widely investigated for the synthesis of particles, and arrays of oriented nanorods and nanotubes. In this paper, based on the ideal crystal shapes predicted by the chemical bonding theory, we have developed some potential chemical strategies to tune the microstructure of functional materials, ZnS and Nb205 nanotube arrays, MgO wiskers and nestlike spheres, and cubic phase Cu2O microcrystals were synthesized here to elucidate these strategies. We describe their controlled crystallization processes and illustrate the detailed key factors controlling their growth by examining various reaction parameters. Current results demonstrate that our designed chemical strategies for tuning microstructure of functional materials are applicable to several technologically important materials, and therefore may be used as a versatile and effective route to the controllable synthesis of other inorganic functional materials.
基金The project supported by the National Natural Science Foundation of China(90405016,10572044)the Specialized Research Fund for the Doctoral Program of Higher Education(20040213034)
文摘In this paper,the dynamic interaction of two parallel cracks in functionally graded materials(FGMs)is investigated by means of the non-local theory.To make the analysis tractable,the shear modulus and the material density are assumed to vary exponentially with the coordinate vertical to the crack.To reduce mathematical difficulties,a one-dimensional non-local kernel is used instead of a twodimensional one for the dynamic problem to obtain stress fields near the crack tips.By use of the Fourier transform,the problem can be solved with the help of two pairs of dual integral equations,in which the unknown variables are the jumps of displacements across the crack surfaces.To solve the dual integral equations,the jumps of displacements across the crack surfaces are expanded in a series of Jacobi polynomials.Unlike the classical elasticity solutions,it is found that no stress singularity is present at the crack tips.The non-local elastic solutions yield a finite hoop stress at the crack tips.The present result provides theoretical references helpful for evaluating relevant strength and preventing material failure of FGMs with initial cracks.The magnitude of the finite stress field depends on relevant parameters,such as the crack length,the distance between two parallel cracks,the parameter describing the FGMs,the frequency of the incident waves and the lattice parameter of materials.
基金Funded by the Country Project of Tacking Key Problem for Fif teen Plan(No.2001BA307B05 08)
文摘The mechanism of chloride ion penetration in high performance concrete was analy zed. The experimental results indicate that there are two important reasons that influence the anti-chloride penetration of high performance concrete. One is the function effect of mineral functional material, so that it increases conc rete's capability to resist chloride ion penetration. The other is combined acti on of mineral functional material's original capability of binding the chloride ion (physical adsorption) and physicochemical adsorption after hydration.
基金supported by the National Key R&D Program of China(No.2018YFB0703702)the National Natural Science Foundation of China(Nos.51773002,51921002).
文摘The great potential of liquid-crystalline block copolymers(LCBCs)containing photoresponsive mesogens toward novel applications in photonics and nanotechnology has been attracting increasing attention,due to the combination of the inherent property of microphase separation of block copolymers and the hierarchically-assembled structures of liquid-crystalline polymers(LCPs).The periodically ordered nanostructures in bulk film of LCBCs can be acquired by supramolecular cooperative motion,derived from the interaction between liquid-crystalline elastic deformation and microphase separation,which are able to improve physical properties of polymer film toward advanced functional applications.Moreover,various micro/nano-patterned structures have been fabricated via light manipulation of photoresponsive LCBCs with good reproducibility and mass production.Thanks to recent developments in synthesis and polymerization techniques,diverse azobenzene-containing LCBCs have been designed,resulting in the creation of a wide variety of novel functions.This review illustrates recent progresses in macroscopic regulation of hierarchical nanostructures in LCBCs towards functional materials.The existing challenges are also discussed,showing perspectives for future studies.
