As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery...As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery fault diagnosis.The traditional signal processing methods,such as classical inference and weighted averaging algorithm usually lack dynamic adaptability that is easy for trends to cause the faults to be misjudged or left out.To enhance the measuring veracity and precision of vibration signal in rotary machine multi-sensor vibration signal fault diagnosis,a novel data level fusion approach is presented on the basis of correlation function analysis to fast determine the weighted value of multi-sensor vibration signals.The approach doesn＇t require knowing the prior information about sensors,and the weighted value of sensors can be confirmed depending on the correlation measure of real-time data tested in the data level fusion process.It gives greater weighted value to the greater correlation measure of sensor signals,and vice versa.The approach can effectively suppress large errors and even can still fuse data in the case of sensor failures because it takes full advantage of sensor＇s own-information to determine the weighted value.Moreover,it has good performance of anti-jamming due to the correlation measures between noise and effective signals are usually small.Through the simulation of typical signal collected from multi-sensors,the comparative analysis of dynamic adaptability and fault tolerance between the proposed approach and traditional weighted averaging approach is taken.Finally,the rotor dynamics and integrated fault simulator is taken as an example to verify the feasibility and advantages of the proposed approach,it is shown that the multi-sensor data level fusion based on correlation function weighted approach is better than the traditional weighted average approach with respect to fusion precision and dynamic adaptability.Meantime,the approach is adaptable and easy to use,can be applied to other areas of vibration measurement.展开更多
Since the position of the electron in a hydrogen atom cannot be determined, the region in which it resides is said to be determined stochastically and forms an electron cloud. The probability density function of the s...Since the position of the electron in a hydrogen atom cannot be determined, the region in which it resides is said to be determined stochastically and forms an electron cloud. The probability density function of the single electron in 1s orbit is expressed as φ2, a function of distance from the nucleus. However, the probability of existence of the electron is expressed as a radial distribution function at an arbitrary distance from the nucleus, so it is estimated as the probability of the entire spherical shape of that radius. In this study, it has been found that the electron existence probability approximates the radial distribution function by assuming that the probability of existence of the electron being in the vicinity of the nucleus follows a normal distribution for arbitrary x-, y-, and z-axis directions. This implies that the probability of existence of the electron, which has been known only from the distance information, would follow a normal distribution independently in the three directions. When the electrons’ motion is extremely restricted in a certain direction by the magnetic field of both tokamak and helical fusion reactors, the probability of existence of the electron increases with proximity to the nucleus, and as a result, it is less likely to be liberated from the nucleus. Therefore, more and more energy is required to free the nucleus from the electron in order to generate plasma.展开更多
The Intrinsic structural disorder (ISD) of native EWS and its fusion oncogenic proteins, including EWS/FliI, EWS/ATF1 and EWS/ZSG, was estimated by different Predictors. The ISD difference between the wild type and th...The Intrinsic structural disorder (ISD) of native EWS and its fusion oncogenic proteins, including EWS/FliI, EWS/ATF1 and EWS/ZSG, was estimated by different Predictors. The ISD difference between the wild type and the oncogenic fusions found in the CTD is due to the fusion partner, usually a transcription factor (TF). A disordered region was found in the sequence (AA 132 - 156) of the NTD (EAD) of EWS, consisting of the longest region free of Y motifs. The IQ domain (AA 258 - 280), a Y-free region, flanked by two Y-boxes, is also disordered by all used Predictors. The EWS functional regions RGG1, RGG2 and RGG3 are predominantly disordered. A strong dependence was found between the structure of EWS protein and its oncogenic fusions, and their estimated ISD. The oncogenic function of the fusions is related to a decreased ISD in the CTD, due to the fused TF. The Predictors shown that the different isoforms have similar profiles, shifted with some amino acids, due to the translocations. On the bases of the prediction results, an analysis was made of the EWS sequence and its functional regions with increased ISD to make a relationship sequence-disorder-function that could be helpful in the design of antitumor agents against the corresponding malignances.展开更多
Functional brain networks (FBN) based on resting-state functional magnetic resonance imaging (rs-fMRI) have become an important tool for exploring underlying organization patterns in the brain, which can provide an ob...Functional brain networks (FBN) based on resting-state functional magnetic resonance imaging (rs-fMRI) have become an important tool for exploring underlying organization patterns in the brain, which can provide an objective basis for brain disorders such as autistic spectrum disorder (ASD). Due to its importance, researchers have proposed a number of FBN estimation methods. However, most existing methods only model a type of functional connection relationship between brain regions-of-interest (ROIs), such as partial correlation or full correlation, which is difficult to fully capture the subtle connections among ROIs since these connections are extremely complex. Motivated by the multi-view learning, in this study we propose a novel Consistent and Specific Multi-view FBNs Fusion (CSMF) approach. Concretely, we first construct multi-view FBNs (i.e., multiple types of FBNs modelling various relationships among ROIs), and then these FBNs are decomposed into a consistent representation matrix and their own specific matrices which capture their common and unique information, respectively. Lastly, to obtain a better brain representation, it is fusing the consistent and specific representation matrices in the latent representation spaces of FBNs, but not directly fusing the original FBNs. This potentially makes it more easily to find the comprehensively brain connections. The experimental results of ASD identification on the ABIDE datasets validate the effectiveness of our proposed method compared to several state-of-the-art methods. Our proposed CSMF method achieved 72.8% and 76.67% classification performance on the ABIDE dataset.展开更多
The purpose of this study was to address the challenges in predicting and classifying accuracy in modeling Container Dwell Time (CDT) using Artificial Neural Networks (ANN). This objective was driven by the suboptimal...The purpose of this study was to address the challenges in predicting and classifying accuracy in modeling Container Dwell Time (CDT) using Artificial Neural Networks (ANN). This objective was driven by the suboptimal outcomes reported in previous studies and sought to apply an innovative approach to improve these results. To achieve this, the study applied the Fusion of Activation Functions (FAFs) to a substantial dataset. This dataset included 307,594 container records from the Port of Tema from 2014 to 2022, encompassing both import and transit containers. The RandomizedSearchCV algorithm from Python’s Scikit-learn library was utilized in the methodological approach to yield the optimal activation function for prediction accuracy. The results indicated that “ajaLT”, a fusion of the Logistic and Hyperbolic Tangent Activation Functions, provided the best prediction accuracy, reaching a high of 82%. Despite these encouraging findings, it’s crucial to recognize the study’s limitations. While Fusion of Activation Functions is a promising method, further evaluation is necessary across different container types and port operations to ascertain the broader applicability and generalizability of these findings. The original value of this study lies in its innovative application of FAFs to CDT. Unlike previous studies, this research evaluates the method based on prediction accuracy rather than training time. It opens new avenues for machine learning engineers and researchers in applying FAFs to enhance prediction accuracy in CDT modeling, contributing to a previously underexplored area.展开更多
The authors have applied a systems analysis approach to describe the musculoskeletal system as consisting of a stack of superimposed kinematic hier-archical segments in which each lower segment tends to transfer its m...The authors have applied a systems analysis approach to describe the musculoskeletal system as consisting of a stack of superimposed kinematic hier-archical segments in which each lower segment tends to transfer its motion to the other superimposed segments. This segmental chain enables the derivation of both conscious perception and sensory control of action in space. This applied systems analysis approach involves the measurements of the complex motor behavior in order to elucidate the fusion of multiple sensor data for the reliable and efficient acquisition of the kinetic, kinematics and electromyographic data of the human spatial behavior. The acquired kinematic and related kinetic signals represent attributive features of the internal recon-struction of the physical links between the superimposed body segments. In-deed, this reconstruction of the physical links was established as a result of the fusion of the multiple sensor data. Furthermore, this acquired kinematics, kinetics and electromyographic data provided detailed means to record, annotate, process, transmit, and display pertinent information derived from the musculoskeletal system to quantify and differentiate between subjects with mobility-related disabilities and able-bodied subjects, and enabled an inference into the active neural processes underlying balance reactions. To gain insight into the basis for this long-term dependence, the authors have applied the fusion of multiple sensor data to investigate the effects of Cerebral Palsy, Multiple Sclerosis and Diabetic Neuropathy conditions, on biomechanical/neurophysiological changes that may alter the ability of the human loco-motor system to generate ambulation, balance and posture.展开更多
Injuries to the central or peripheral nervous system frequently cause long-term disabilities because damaged neurons are unable to efficiently self-repair.This inherent deficiency necessitates the need for new treatme...Injuries to the central or peripheral nervous system frequently cause long-term disabilities because damaged neurons are unable to efficiently self-repair.This inherent deficiency necessitates the need for new treatment options aimed at restoring lost function to patients.Compared to humans,a number of species possess far greater regenerative capabilities,and can therefore provide important insights into how our own nervous systems can be repaired.In particular,several invertebrate species have been shown to rapidly initiate regeneration post-injury,allowing separated axon segments to re-join.This process,known as axonal fusion,represents a highly efficient repair mechanism as a regrowing axon needs to only bridge the site of damage and fuse with its separated counterpart in order to re-establish its original structure.Our recent findings in the nematode Caenorhabditis elegans have expanded the promise of axonal fusion by demonstrating that it can restore complete function to damaged neurons.Moreover,we revealed the importance of injury-induced changes in the composition of the axonal membrane for mediating axonal fusion,and discovered that the level of axonal fusion can be enhanced by promoting a neuron＇s intrinsic growth potential.A complete understanding of the molecular mechanisms controlling axonal fusion may permit similar approaches to be applied in a clinical setting.展开更多
A new method of multi sensor location data fusion is proposed.The method is based on group consensus approach, which constructs group utility function (or its density) based on uncertainty of each sensor, and the loc...A new method of multi sensor location data fusion is proposed.The method is based on group consensus approach, which constructs group utility function (or its density) based on uncertainty of each sensor, and the location estimation is obtained based on the group utility function (or its density). The simulation results show that the method is better than those of mean and median estimation, and outlier and sensor failure can not affect the location estimation.展开更多
It is well known that Landsat TM images are the most widely used remote sensing data in various fields.Usually,it has 7 different electromagnetic spectrum bands,among which the sixth one has much lower ground resoluti...It is well known that Landsat TM images are the most widely used remote sensing data in various fields.Usually,it has 7 different electromagnetic spectrum bands,among which the sixth one has much lower ground resolution compared with the other six bands.Nevertheless,it is useful in the study of rock spectrum reflection,geothermal resources exploration,etc.To improve the ground resolution of TM6 to the level as that of the other six bands is a problem .This paper presents an algorithm based on the combination of multivariate regression model with semivariogram function which can improve the ground resolution of TM6 by "fusing" the data of other six bands.It includes the following main steps: （1） testing the correlation between TM6 and one of TM15,7.If the correlation coefficient between TM6 and another one is greater than a given threshold value,then select the band to the regression analysis as an argument.（2） calculating the size of the template window within which some parameters needed by the regression model will be calculated; （3） replacing the original pixel values of TM6 by those obtained by regression analysis; （4） using image entropy as a measurement to evaluate the quality of the fused image of TM6.The basic mechanism of the algorithm is discussed and the V C ++ program for implementing this algorithm is also presented.A simple application example is given in the last part of this paper,showing the effectiveness of the algorithm.展开更多
Introduction: Incidence of spondylolisthesis in general population is 5% - 7%. No matter what the etiology is, patients usually have significant functional disability. Few studies have investigated the long term effec...Introduction: Incidence of spondylolisthesis in general population is 5% - 7%. No matter what the etiology is, patients usually have significant functional disability. Few studies have investigated the long term effect of posterolateral fusion on functional outcome. Objectives: To study the efficacy of posterolateral fusion in spondylolisthesis especially in terms of functional outcome. Methodology: From July 2010 to June 2012, a total of 86 patients, operated with postero-lateral fusion were followed up and evaluated based on VAS for low back pain, ODI and neurological deficits. Results: Follow up was 83% of original study population (86). Average follow up was 13 months. The mean difference between pre-operative and post-operative VAS at final follow up was 3.5 cms (SD = 2.94);ODI was 28% at 4 months and 36% at 8 months. Claudication pain relieved in all;functional outcome was good in 67%, fair in 27.5% and failed in 5.5%;75% had fusion at an average of 5.5 months. Conclusion: Posteriolateral fusion is still a safe, promising and appealing technique.展开更多
Recently, the work function （WF） changes in metallic and ceramic materials to be potentially used in future fusion reactors have been examined by means of Kelvin probe （KP）, under He ion irradiation in high energy...Recently, the work function （WF） changes in metallic and ceramic materials to be potentially used in future fusion reactors have been examined by means of Kelvin probe （KP）, under He ion irradiation in high energy （MeV） and / or low energy （500 eV） ranges. The results of polycrystalline Ni samples indicate that the 1 MeV beam only induces decrease in the WF within the experimental fluence range; whereas the irradiation of 500 eV beam results in decrease in the WF firstly, then increase till saturation. A dual layer surface model is employed to explain the observed phenomena, together with computer simulation results by SRIM code. Charges buildup on the surface of lithium ceramics has been found to greatly influence the probe output, which can be explained qualitatively using a model concerning an induction electric field due to external field and free charges on the ceramic surface.展开更多
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2007AA04Z433)Hunan Provincial Natural Science Foundation of China (Grant No. 09JJ8005)Scientific Research Foundation of Graduate School of Beijing University of Chemical and Technology,China (Grant No. 10Me002)
文摘As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery fault diagnosis.The traditional signal processing methods,such as classical inference and weighted averaging algorithm usually lack dynamic adaptability that is easy for trends to cause the faults to be misjudged or left out.To enhance the measuring veracity and precision of vibration signal in rotary machine multi-sensor vibration signal fault diagnosis,a novel data level fusion approach is presented on the basis of correlation function analysis to fast determine the weighted value of multi-sensor vibration signals.The approach doesn＇t require knowing the prior information about sensors,and the weighted value of sensors can be confirmed depending on the correlation measure of real-time data tested in the data level fusion process.It gives greater weighted value to the greater correlation measure of sensor signals,and vice versa.The approach can effectively suppress large errors and even can still fuse data in the case of sensor failures because it takes full advantage of sensor＇s own-information to determine the weighted value.Moreover,it has good performance of anti-jamming due to the correlation measures between noise and effective signals are usually small.Through the simulation of typical signal collected from multi-sensors,the comparative analysis of dynamic adaptability and fault tolerance between the proposed approach and traditional weighted averaging approach is taken.Finally,the rotor dynamics and integrated fault simulator is taken as an example to verify the feasibility and advantages of the proposed approach,it is shown that the multi-sensor data level fusion based on correlation function weighted approach is better than the traditional weighted average approach with respect to fusion precision and dynamic adaptability.Meantime,the approach is adaptable and easy to use,can be applied to other areas of vibration measurement.
文摘Since the position of the electron in a hydrogen atom cannot be determined, the region in which it resides is said to be determined stochastically and forms an electron cloud. The probability density function of the single electron in 1s orbit is expressed as φ2, a function of distance from the nucleus. However, the probability of existence of the electron is expressed as a radial distribution function at an arbitrary distance from the nucleus, so it is estimated as the probability of the entire spherical shape of that radius. In this study, it has been found that the electron existence probability approximates the radial distribution function by assuming that the probability of existence of the electron being in the vicinity of the nucleus follows a normal distribution for arbitrary x-, y-, and z-axis directions. This implies that the probability of existence of the electron, which has been known only from the distance information, would follow a normal distribution independently in the three directions. When the electrons’ motion is extremely restricted in a certain direction by the magnetic field of both tokamak and helical fusion reactors, the probability of existence of the electron increases with proximity to the nucleus, and as a result, it is less likely to be liberated from the nucleus. Therefore, more and more energy is required to free the nucleus from the electron in order to generate plasma.
文摘The Intrinsic structural disorder (ISD) of native EWS and its fusion oncogenic proteins, including EWS/FliI, EWS/ATF1 and EWS/ZSG, was estimated by different Predictors. The ISD difference between the wild type and the oncogenic fusions found in the CTD is due to the fusion partner, usually a transcription factor (TF). A disordered region was found in the sequence (AA 132 - 156) of the NTD (EAD) of EWS, consisting of the longest region free of Y motifs. The IQ domain (AA 258 - 280), a Y-free region, flanked by two Y-boxes, is also disordered by all used Predictors. The EWS functional regions RGG1, RGG2 and RGG3 are predominantly disordered. A strong dependence was found between the structure of EWS protein and its oncogenic fusions, and their estimated ISD. The oncogenic function of the fusions is related to a decreased ISD in the CTD, due to the fused TF. The Predictors shown that the different isoforms have similar profiles, shifted with some amino acids, due to the translocations. On the bases of the prediction results, an analysis was made of the EWS sequence and its functional regions with increased ISD to make a relationship sequence-disorder-function that could be helpful in the design of antitumor agents against the corresponding malignances.
文摘Functional brain networks (FBN) based on resting-state functional magnetic resonance imaging (rs-fMRI) have become an important tool for exploring underlying organization patterns in the brain, which can provide an objective basis for brain disorders such as autistic spectrum disorder (ASD). Due to its importance, researchers have proposed a number of FBN estimation methods. However, most existing methods only model a type of functional connection relationship between brain regions-of-interest (ROIs), such as partial correlation or full correlation, which is difficult to fully capture the subtle connections among ROIs since these connections are extremely complex. Motivated by the multi-view learning, in this study we propose a novel Consistent and Specific Multi-view FBNs Fusion (CSMF) approach. Concretely, we first construct multi-view FBNs (i.e., multiple types of FBNs modelling various relationships among ROIs), and then these FBNs are decomposed into a consistent representation matrix and their own specific matrices which capture their common and unique information, respectively. Lastly, to obtain a better brain representation, it is fusing the consistent and specific representation matrices in the latent representation spaces of FBNs, but not directly fusing the original FBNs. This potentially makes it more easily to find the comprehensively brain connections. The experimental results of ASD identification on the ABIDE datasets validate the effectiveness of our proposed method compared to several state-of-the-art methods. Our proposed CSMF method achieved 72.8% and 76.67% classification performance on the ABIDE dataset.
文摘The purpose of this study was to address the challenges in predicting and classifying accuracy in modeling Container Dwell Time (CDT) using Artificial Neural Networks (ANN). This objective was driven by the suboptimal outcomes reported in previous studies and sought to apply an innovative approach to improve these results. To achieve this, the study applied the Fusion of Activation Functions (FAFs) to a substantial dataset. This dataset included 307,594 container records from the Port of Tema from 2014 to 2022, encompassing both import and transit containers. The RandomizedSearchCV algorithm from Python’s Scikit-learn library was utilized in the methodological approach to yield the optimal activation function for prediction accuracy. The results indicated that “ajaLT”, a fusion of the Logistic and Hyperbolic Tangent Activation Functions, provided the best prediction accuracy, reaching a high of 82%. Despite these encouraging findings, it’s crucial to recognize the study’s limitations. While Fusion of Activation Functions is a promising method, further evaluation is necessary across different container types and port operations to ascertain the broader applicability and generalizability of these findings. The original value of this study lies in its innovative application of FAFs to CDT. Unlike previous studies, this research evaluates the method based on prediction accuracy rather than training time. It opens new avenues for machine learning engineers and researchers in applying FAFs to enhance prediction accuracy in CDT modeling, contributing to a previously underexplored area.
文摘The authors have applied a systems analysis approach to describe the musculoskeletal system as consisting of a stack of superimposed kinematic hier-archical segments in which each lower segment tends to transfer its motion to the other superimposed segments. This segmental chain enables the derivation of both conscious perception and sensory control of action in space. This applied systems analysis approach involves the measurements of the complex motor behavior in order to elucidate the fusion of multiple sensor data for the reliable and efficient acquisition of the kinetic, kinematics and electromyographic data of the human spatial behavior. The acquired kinematic and related kinetic signals represent attributive features of the internal recon-struction of the physical links between the superimposed body segments. In-deed, this reconstruction of the physical links was established as a result of the fusion of the multiple sensor data. Furthermore, this acquired kinematics, kinetics and electromyographic data provided detailed means to record, annotate, process, transmit, and display pertinent information derived from the musculoskeletal system to quantify and differentiate between subjects with mobility-related disabilities and able-bodied subjects, and enabled an inference into the active neural processes underlying balance reactions. To gain insight into the basis for this long-term dependence, the authors have applied the fusion of multiple sensor data to investigate the effects of Cerebral Palsy, Multiple Sclerosis and Diabetic Neuropathy conditions, on biomechanical/neurophysiological changes that may alter the ability of the human loco-motor system to generate ambulation, balance and posture.
基金supported by National Health and Medical Research Council(NHMRC) Project Grant 1101974 to BN
文摘Injuries to the central or peripheral nervous system frequently cause long-term disabilities because damaged neurons are unable to efficiently self-repair.This inherent deficiency necessitates the need for new treatment options aimed at restoring lost function to patients.Compared to humans,a number of species possess far greater regenerative capabilities,and can therefore provide important insights into how our own nervous systems can be repaired.In particular,several invertebrate species have been shown to rapidly initiate regeneration post-injury,allowing separated axon segments to re-join.This process,known as axonal fusion,represents a highly efficient repair mechanism as a regrowing axon needs to only bridge the site of damage and fuse with its separated counterpart in order to re-establish its original structure.Our recent findings in the nematode Caenorhabditis elegans have expanded the promise of axonal fusion by demonstrating that it can restore complete function to damaged neurons.Moreover,we revealed the importance of injury-induced changes in the composition of the axonal membrane for mediating axonal fusion,and discovered that the level of axonal fusion can be enhanced by promoting a neuron＇s intrinsic growth potential.A complete understanding of the molecular mechanisms controlling axonal fusion may permit similar approaches to be applied in a clinical setting.
文摘A new method of multi sensor location data fusion is proposed.The method is based on group consensus approach, which constructs group utility function (or its density) based on uncertainty of each sensor, and the location estimation is obtained based on the group utility function (or its density). The simulation results show that the method is better than those of mean and median estimation, and outlier and sensor failure can not affect the location estimation.
文摘It is well known that Landsat TM images are the most widely used remote sensing data in various fields.Usually,it has 7 different electromagnetic spectrum bands,among which the sixth one has much lower ground resolution compared with the other six bands.Nevertheless,it is useful in the study of rock spectrum reflection,geothermal resources exploration,etc.To improve the ground resolution of TM6 to the level as that of the other six bands is a problem .This paper presents an algorithm based on the combination of multivariate regression model with semivariogram function which can improve the ground resolution of TM6 by "fusing" the data of other six bands.It includes the following main steps: （1） testing the correlation between TM6 and one of TM15,7.If the correlation coefficient between TM6 and another one is greater than a given threshold value,then select the band to the regression analysis as an argument.（2） calculating the size of the template window within which some parameters needed by the regression model will be calculated; （3） replacing the original pixel values of TM6 by those obtained by regression analysis; （4） using image entropy as a measurement to evaluate the quality of the fused image of TM6.The basic mechanism of the algorithm is discussed and the V C ++ program for implementing this algorithm is also presented.A simple application example is given in the last part of this paper,showing the effectiveness of the algorithm.
文摘Introduction: Incidence of spondylolisthesis in general population is 5% - 7%. No matter what the etiology is, patients usually have significant functional disability. Few studies have investigated the long term effect of posterolateral fusion on functional outcome. Objectives: To study the efficacy of posterolateral fusion in spondylolisthesis especially in terms of functional outcome. Methodology: From July 2010 to June 2012, a total of 86 patients, operated with postero-lateral fusion were followed up and evaluated based on VAS for low back pain, ODI and neurological deficits. Results: Follow up was 83% of original study population (86). Average follow up was 13 months. The mean difference between pre-operative and post-operative VAS at final follow up was 3.5 cms (SD = 2.94);ODI was 28% at 4 months and 36% at 8 months. Claudication pain relieved in all;functional outcome was good in 67%, fair in 27.5% and failed in 5.5%;75% had fusion at an average of 5.5 months. Conclusion: Posteriolateral fusion is still a safe, promising and appealing technique.
文摘Recently, the work function （WF） changes in metallic and ceramic materials to be potentially used in future fusion reactors have been examined by means of Kelvin probe （KP）, under He ion irradiation in high energy （MeV） and / or low energy （500 eV） ranges. The results of polycrystalline Ni samples indicate that the 1 MeV beam only induces decrease in the WF within the experimental fluence range; whereas the irradiation of 500 eV beam results in decrease in the WF firstly, then increase till saturation. A dual layer surface model is employed to explain the observed phenomena, together with computer simulation results by SRIM code. Charges buildup on the surface of lithium ceramics has been found to greatly influence the probe output, which can be explained qualitatively using a model concerning an induction electric field due to external field and free charges on the ceramic surface.
