Agilent 33200A family of function/arbitrary waveform generators are widely used in labs for creating arbitrary waveforms.Flexible applications of function/arbitrary waveform generator 33250A which is made by Agilent c...Agilent 33200A family of function/arbitrary waveform generators are widely used in labs for creating arbitrary waveforms.Flexible applications of function/arbitrary waveform generator 33250A which is made by Agilent company are expatiated.There are three methods of transferring waveform data to arbitrary waveform generator 33250A,among which,the front panel method can produce a simple interface for arbitrary waveforms and is applicable to the composition of a small amount of linear waveform segment,and the progress of this method is explained in detail.This way is convenient and can be widely used,and it will offer some good guidance in library works.展开更多
采集美国Facts up Front标签官方网站发布的资料与信息,从Facts up Front标签的特点、类型,与相近包装正面(FOP)标签的基本情况对比,与其他包装正面(FOP)标签的实施效果比较等方面凝练实践经验,并为中国启动与发展包装正面(FOP)标签提...采集美国Facts up Front标签官方网站发布的资料与信息,从Facts up Front标签的特点、类型,与相近包装正面(FOP)标签的基本情况对比,与其他包装正面(FOP)标签的实施效果比较等方面凝练实践经验,并为中国启动与发展包装正面(FOP)标签提出建议。展开更多
针对某车型前围板的拉延成形工序进行研究,采用正交试验进行试验方案设计。以最大减薄率φ1和起皱评价函数φ2作为优化目标函数,压边力F、摩擦系数μ和凹模下压速度v作为影响因素进行多目标优化,最终得到最优参数组合:F=600 k N、μ=0....针对某车型前围板的拉延成形工序进行研究,采用正交试验进行试验方案设计。以最大减薄率φ1和起皱评价函数φ2作为优化目标函数,压边力F、摩擦系数μ和凹模下压速度v作为影响因素进行多目标优化,最终得到最优参数组合:F=600 k N、μ=0.125、v=15 mm·s^(-1)。通过在工厂实际试模中检验,能够获得合格的零件。将数值模拟结果和实际试模进行对比,发现数值模拟结果和实际试模一致,零件无拉裂缺陷,零件局部起皱,起皱区域主要位于切边线以外。试验表明,将数值模拟和正交试验相结合可以有效对冲压成形工艺参数进行优化。展开更多
文摘Agilent 33200A family of function/arbitrary waveform generators are widely used in labs for creating arbitrary waveforms.Flexible applications of function/arbitrary waveform generator 33250A which is made by Agilent company are expatiated.There are three methods of transferring waveform data to arbitrary waveform generator 33250A,among which,the front panel method can produce a simple interface for arbitrary waveforms and is applicable to the composition of a small amount of linear waveform segment,and the progress of this method is explained in detail.This way is convenient and can be widely used,and it will offer some good guidance in library works.
文摘针对某车型前围板的拉延成形工序进行研究,采用正交试验进行试验方案设计。以最大减薄率φ1和起皱评价函数φ2作为优化目标函数,压边力F、摩擦系数μ和凹模下压速度v作为影响因素进行多目标优化,最终得到最优参数组合:F=600 k N、μ=0.125、v=15 mm·s^(-1)。通过在工厂实际试模中检验,能够获得合格的零件。将数值模拟结果和实际试模进行对比,发现数值模拟结果和实际试模一致,零件无拉裂缺陷,零件局部起皱,起皱区域主要位于切边线以外。试验表明,将数值模拟和正交试验相结合可以有效对冲压成形工艺参数进行优化。
