In modern broadband communication systems,radio frequency power amplifiers suffer from severe nonlinear distortion and memory effects.To accurately analyze the impact of their characteristics on communication systems,...In modern broadband communication systems,radio frequency power amplifiers suffer from severe nonlinear distortion and memory effects.To accurately analyze the impact of their characteristics on communication systems,it is necessary to establish precise amplifier models.In recent years,deep neural networks have been widely applied to power amplifier modeling.In order to describe the complex dynamic characteristics of power amplifiers,the deep neural network often requires a large number of hidden layers,which leads to large model scale and difficulties in training.To address this issue,a novel behavioral model is proposed in this paper.It combines the classical Saleh model with a deep feedforward neural network.Since the Saleh model can be identified using the least squares method without requiring iterative gradient algorithms,the computational load of model training is significantly reduced.Simulation results demonstrate that,compared to deep neural network models with equivalent parameter quantities,the proposed model exhibits higher accuracy and faster convergence.展开更多
In order to prepare the shielding fabrics with high efficiency of power frequency(PF)shielding and excellent electrical conductivity,different ratios of aramid/stainless steel fiber blended yarns were used to weave th...In order to prepare the shielding fabrics with high efficiency of power frequency(PF)shielding and excellent electrical conductivity,different ratios of aramid/stainless steel fiber blended yarns were used to weave the shielding fabrics with different specifications.The fabric structure,fabric areal density,number of fabric layers,embedding ratio of copper-clad wires wrapped aramid yarns(denoted as CCWWA)and embedding direction were designed,and a total of 34 different types of shielding fabrics were woven for testing.The experiments were mainly conducted to study the influence mechanism of various factors on the PF shielding effectiveness by testing the electrical conductivity and PF shielding effectiveness of the fabrics.The research results indicate that the PF shielding effectiveness improves with increasing fabric areal density and metal fiber content.The fabrics embedded with CCWWA,particularly those with bidirectional embedding,exhibit a significant enhancement in the PF shielding effectiveness,showing an increase of 8-20 dB compared to the fabrics without CCWWA.The PF shielding effectiveness varies across different fabric structures,with plain weave fabrics demonstrating the superior PF shielding effectiveness due to their compact structure.Non-conductive base fabric has minimal impact on the PF shielding effectiveness.As the number of fabric layers increases,the PF shielding effectiveness initially improves but then declines,peaking with double-layer fabrics.展开更多
With the increasing penetration of renewable energy,the coordination of energy storage with thermal power for frequency regulation has become an effective means to enhance grid frequency security.Addressing the challe...With the increasing penetration of renewable energy,the coordination of energy storage with thermal power for frequency regulation has become an effective means to enhance grid frequency security.Addressing the challenge of improving the frequency regulation performance of a thermal-storage primary frequency regulation system while reducing its associated losses,this paper proposes a multi-dimensional cooperative optimization strategy for the control parameters of a combined thermal-storage system,considering regulation losses.First,the frequency regulation losses of various components within the thermal power unit are quantified,and a calculation method for energy storage regulation loss is proposed,based on Depth of Discharge(DOD)and C-rate.Second,a thermal-storage cooperative control method based on series compensation is developed to improve the system’s frequency regulation performance.Third,targeting system regulation loss cost and regulation output,and considering constraints on output overshoot and system parameters,an improved Particle Swarm Optimization(PSO)algorithm is employed to tune the parameters of the low-pass filter and the series compensator,thereby reducing regulation losses while enhancing performance.Finally,simulation results demonstrate that the total loss cost of the proposed control strategy is comparable to that of a system with only thermal power participation.However,the thermal power loss cost is reduced by 42.16%compared to the thermal-only case,while simultaneously improving system frequency stability.Thus,the proposed strategy effectively balances system frequency stability and economic efficiency.展开更多
Based on the piezo-optic effect of medium, the refractive index of medium is the function of its density, and so it's also the function of acoustic pressure. Therefore, acoustic pressure in the optical path everyw...Based on the piezo-optic effect of medium, the refractive index of medium is the function of its density, and so it's also the function of acoustic pressure. Therefore, acoustic pressure in the optical path everywhere can be determined absolutely by laser-interferometric technique and relative distribution of pressure in the middle and far acoustic field, which can be obtained from theory or experiment respectively. Theory and experiment of measurement of pressure in acoustic field with laser-interferometer are introduced. Distribution of pressure radiated by a power ultrasonic transducer is determined by laser interferometric technique. The theoretical and experimental results are in good agreement. The receiving sensitivity of a PVDF (Polyvinylidene fluoride) transducer in free field is also calibrated absolutely due to above results and its sensitivity is -118.5 dB.展开更多
Amplified spontaneous emission （ASE） in diode laser pumped double-clad fiber power amplifiers is studied experimentally, The dependences of ASE on fiber length and cross section of active core are discussed and the ...Amplified spontaneous emission （ASE） in diode laser pumped double-clad fiber power amplifiers is studied experimentally, The dependences of ASE on fiber length and cross section of active core are discussed and the variations of ASE power as the function of pumping and signal power are investigated. There are indications that long fibers with large mode area need stronger input signals to suppress ASE. It is shown that a 150 mW input signal can suppress the ASE by 40 dB in a 4 m large mode area fiber, while to efficiently suppress the ASE in a 10 m fiber, stronger input signal is needed. 12.5 W and 16.1 W single frequency CW output power are obtained from 4 m fiber and 10 m fiber respectively. No stimulated Brillouin scattering （SBS） was observed展开更多
In most earlier ferroresonance studies the traditional excitation characteristic of iron core, in which the traditional excitation characteristic contains harmonic voltages or currents, has been used as if it were mad...In most earlier ferroresonance studies the traditional excitation characteristic of iron core, in which the traditional excitation characteristic contains harmonic voltages or currents, has been used as if it were made up of pure fundamental voltage or current. However, this is not always true. In comparison with traditional excitation characteristics, this paper introduces the power frequency excitation characteristic of the iron core, which contains no harmonics. The power frequency excitation characteristic of iron core has been obtained by Elector Magnetic Transient Program, resulting in discrete voltage and current pairs. Extensive simulations are carried out to analyse the effect of power frequency excitation characteristic on potential transformer ferroresonance. A detailed analysis of simulation results demonstrates that with power frequency excitation characteristic of iron core inclusion at certain excitation voltage the ferroresonance may happen, conversely it may not happen with traditional excitation characteristic inclusion.展开更多
To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail tra...To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail transit. The proposed system consists of a main substation （MSS） and cable traction network （CTN）. The MSS includes a single-phase main traction transformer and a negative-se- quence compensation device, while the CTN includes double-core cables, traction transformers, overhead catenary system, rails, etc. Several key techniques for the proposed system were put forward and discussed, which can be summarized as （1） the power supply principle, equivalent circuit and transmission ability of the CTN, the cable-catenary matching technique, and the selection of catenary voltage level; （2） the segmentation technology and status identification method for traction power supply network, distributed and centralized protection schemes, etc.; （3） a power supply scheme for single-line MSS and a power supply scheme of MSS shared by two or more lines. The proposed industrial frequency single-phase AC traction power supply system shows an excellent technical performance, good economy, and high reliability, hence provides a new alternative for metro and urban rail transit power supply systems.展开更多
This paper analyzes and studies the problems of frequent system crash, high internal cremation rate and low efficiency in the electric dust control room of Liaoning Diaobingshan Gangue Power Generation Co., Ltd., upgr...This paper analyzes and studies the problems of frequent system crash, high internal cremation rate and low efficiency in the electric dust control room of Liaoning Diaobingshan Gangue Power Generation Co., Ltd., upgrades the control system, replaces the rapping beam, adjusts the spacing between the substrate and the pole line, and increases the efficiency of electric dust removal. At the same time, it can save energy and reduce consumption.展开更多
Plasma polymerized maleic anhydride （MA） was carried out by using maleic anhydride supersaturated ethanol solution as a precursor in a dielectric barrier discharge （DBD）. The film properties were characterized by ...Plasma polymerized maleic anhydride （MA） was carried out by using maleic anhydride supersaturated ethanol solution as a precursor in a dielectric barrier discharge （DBD）. The film properties were characterized by water contact angle （WCA）, Fourier transfer infrared （FTIR）, X-ray photoelectron spectroscopy （XPS）, atomic force microscope （AFM） analysis, and a thickness profilometer. The influence of the processing parameters on the film properties such as tile power frequency and polymerization zone was investigated. The results show that anhydride group incorporated into the growing films is favorable at the frequency of 80 kHz and working pressure of 50 Pa. The poly （maleic anhydride） film is uniform and compact at an average deposition rate of 8 nm/min.展开更多
This paper presents a brief overview of several promising design technologies for high efficiency silicon-based radio frequency （RF） power amplifiers （PAs） as well as the use of these technologies in mobile broadb...This paper presents a brief overview of several promising design technologies for high efficiency silicon-based radio frequency （RF） power amplifiers （PAs） as well as the use of these technologies in mobile broadband wireless communications. Four important aspects of PA design are addressed in this paper. First, we look at class-E PA design equations and provide an example of a class-E PA that achieves efficiency of 65-70% at 2.4 GHz. Then, we discuss state-of-the-art envelope tracking （ET） design for monolithic wideband RF mobile transmitter applications. A brief overview of Doherty PA design for the next-generation wireless handset applications is then given. Towards the end of the paper, we discuss an inherently broadband and highly efficient class-J PA design targeting future multi-band multi-standard wireless communication protocols.展开更多
In contrast to conventional transformers, power electronic transformers, as an integral component of new energy power system, are often subjected to high-frequency and transient electrical stresses, leading to heighte...In contrast to conventional transformers, power electronic transformers, as an integral component of new energy power system, are often subjected to high-frequency and transient electrical stresses, leading to heightened concerns regarding insulation failures. Meanwhile, the underlying mechanism behind discharge breakdown failure and nanofiller enhancement under high-frequency electrical stress remains unclear. An electric-thermal coupled discharge breakdown phase field model was constructed to study the evolution of the breakdown path in polyimide nanocomposite insulation subjected to high-frequency stress. The investigation focused on analyzing the effect of various factors, including frequency, temperature, and nanofiller shape, on the breakdown path of Polyimide(PI) composites. Additionally, it elucidated the enhancement mechanism of nano-modified composite insulation at the mesoscopic scale. The results indicated that with increasing frequency and temperature, the discharge breakdown path demonstrates accelerated development, accompanied by a gradual dominance of Joule heat energy. This enhancement is attributed to the dispersed electric field distribution and the hindering effect of the nanosheets. The research findings offer a theoretical foundation and methodological framework to inform the optimal design and performance management of new insulating materials utilized in high-frequency power equipment.展开更多
The PMD-induced pulse broadening may cause the degradation ofreceiver sensitivity and has negative effects on the power spectrumof received signals. The expression s of PMO-induced pulse broadeningeffects on receiver ...The PMD-induced pulse broadening may cause the degradation ofreceiver sensitivity and has negative effects on the power spectrumof received signals. The expression s of PMO-induced pulse broadeningeffects on receiver sensitivity are derived based on the concept ofman square pulse width. The effects of PMD on the spectrum ofreceived power are analyzed in detail. Finally, the scheme isdiscussed with which the poser of a certain frequency component isextracted as a feedback control signal in a PMD compensation system.展开更多
For solving the dynamic instability problem of Yunnan Provincial Power System (YNPS) and the South China Interconnected Power System (SCIPS), Lubuge Hydropower Station was chosen to install Power System Stabilizer (PS...For solving the dynamic instability problem of Yunnan Provincial Power System (YNPS) and the South China Interconnected Power System (SCIPS), Lubuge Hydropower Station was chosen to install Power System Stabilizer (PSS). This paper introduces the principles and methods of parameter selection for PSS, in addition to field test. The test results show that the PSS installed can significantly improve the system damping.展开更多
This paper investigates the start-up and shutdown phases of a five-bladed closed-impeller centrifugal pump through experimental analysis,capturing the temporal evolution of its hydraulic performances.The study also pr...This paper investigates the start-up and shutdown phases of a five-bladed closed-impeller centrifugal pump through experimental analysis,capturing the temporal evolution of its hydraulic performances.The study also predicts the transient characteristics of the pump under non-rated operating conditions to assess the accuracy of various machine learning methods in forecasting its instantaneous performance.Results indicate that the pump’s transient behavior in power-frequency mode markedly differs from that in frequency-conversion mode.Specifically,the power-frequency mode achieves steady-state values faster and exhibits smaller fluctuations before stabilization compared to the other mode.During the start-up phase,as the steady-state flow rate increases,inlet and outlet pressures and head also rise,while torque and shaft power decrease,with rotational speed remaining largely unchanged.Conversely,during the shutdown phase,no significant changes were observed in torque,shaft power,or rotational speed.Six machine learning models,including Gaussian Process Regression(GPR),Decision Tree Regression(DTR),and Deep Learning Networks(DLN),demonstrated high accuracy in predicting the hydraulic performance of the centrifugal pump during the start-up and shutdown phases in both power-frequency and frequency-conversion conditions.The findings provide a theoretical foundation for improved prediction of pump hydraulic performance.For instance,when predicting head and flow rate during power-frequency start-up,GPR achieved absolute and relative errors of 0.54 m(7.84%)and 0.21 m3/h(13.57%),respectively,while the Feedforward Neural Network(FNN)reported errors of 0.98 m(8.24%)and 0.10 m3/h(16.71%).By contrast,the Support Vector Machine Regression(SVMR)and Generalized Additive Model(GAM)generally yielded less satisfactory prediction accuracy compared to the other methods.展开更多
The arc faults inside oil-immersed power equipment can produce high-amplitude pres-sure waves inside tanks,which might cause ignition and explosion accidents.This kind of failure is one of the most severe faults for p...The arc faults inside oil-immersed power equipment can produce high-amplitude pres-sure waves inside tanks,which might cause ignition and explosion accidents.This kind of failure is one of the most severe faults for power equipment and has attracted consid-erable attention in recent years.However,due to the high risk of the experiments and the complex development of arc in oil,the characteristics of the pressure wave formed by the arc are still confusing.In this paper,the time-frequency characteristics of pressure waves are analysed using several experiments of 1-8 kA power-frequency arc inside a closed oil tank.The experimental results show that the pressure wave produced by the arc in oil contains three frequency bands,0-500 Hz,500 Hz-40 kHz,and above 40 kHz,which are related to the arc energy,the average current around arc ignition and the metal wire explosion respectively.This helps further understand the formation mechanism of the pressure wave caused by the arc in oil.This paper discusses the influences of ignition wire on arc-formed pressure waves.A wire diameter selection method for arc experiments is established to reduce the pressure differences between wire-ignited arcs and actual arc faults.展开更多
An attempt has been made to explore whether the power relation can be obtained from theoretical considerations. The classical laminar and turbulent boundary layer concepts have been employed to determine appropriate v...An attempt has been made to explore whether the power relation can be obtained from theoretical considerations. The classical laminar and turbulent boundary layer concepts have been employed to determine appropriate values of the scaling lengths associated with vortex shedding and shear layer frequencies to predict the power law relationship with Reynolds number. The predicted results are in good agreement with experimental results. The findings will provide a greater insight into the overall phenomenon involved.展开更多
SiN, films are deposited on silicon wafers through plasma enhanced chemical vapor deposition （PECVD）. The relationship between the film stress and deposition factors is investigated. It is found that low stress film...SiN, films are deposited on silicon wafers through plasma enhanced chemical vapor deposition （PECVD）. The relationship between the film stress and deposition factors is investigated. It is found that low stress films would be obtained by adjusting the ratio of low frequency（LF） power to high frequency（HF） power pulse time or the chamber pressure. The best of the two methods to control stress in the film is changing the percentage of LF power pulse time. The low stress condition is achieved when the percentage of low frequency power pulse time in total time（LF and HF pulse time） is close to 40%, The low stress cantilever of tunable vertical cavity surface emitting laser is obtained by using this deposition condition,展开更多
A surface electromyography(sEMG)signal acquisition circuit based on high-order filtering is designed.We use a two-stage adjustable amplifier and a high-order Sallen-Key bandpass filter to solve the problems of non-adj...A surface electromyography(sEMG)signal acquisition circuit based on high-order filtering is designed.We use a two-stage adjustable amplifier and a high-order Sallen-Key bandpass filter to solve the problems of non-adjustable amplification gain and low filtering order in traditional acquisition circuits.The experimental results show that the designed sEMG signal acquisition device can eliminate power frequency interference effectively,the stopband drop of the filtering part reaches approximately-100 dB/dec,which can effectively extract useful signals between 20-500 Hz,and the amplification gain reaches 60 dB.展开更多
The energy relationships among all the elements, by which the magnetostrictive transducers are manufactured, in Finite Element Method (FEM) are analyzed, then the expres- sions of FEM dynamics equations and performanc...The energy relationships among all the elements, by which the magnetostrictive transducers are manufactured, in Finite Element Method (FEM) are analyzed, then the expres- sions of FEM dynamics equations and performances formulas for magnetostrictive transducers are derived. The vibrating modes of the class VII transducer and its shell vibration are calcu- lated theoretically and the results point out that there is a breathing mode and if the transducer works at this mode, the transducer will vibrate with a greater volume speed and source level.展开更多
Renewable energy sources(RESs)are rapidly devel-oping and their substitution for traditional power generation poses significant challenges to the frequency regulation in power systems.The load damping factor D charact...Renewable energy sources(RESs)are rapidly devel-oping and their substitution for traditional power generation poses significant challenges to the frequency regulation in power systems.The load damping factor D characterizes the active power of load that changes with power system frequency,which is an important factor influencing the frequency response.However,the value of D is small,resulting in the limitation in frequency regulation of the power system.This paper proposes a parallel-type load damping factor controller to enhance load damping factor by utilizing static var generators(SVGs)in substations.Additionally,it discusses the configuration method for the relevant parameters of the controller,evaluates its frequen-cy regulation capability,investigates the impact of large-scale application of the controller on static and dynamic loads,and conducts a comprehensive evaluation of the impact of the damping factor control process on the voltage stability of the main grid.The large-scale application of the proposed controller can significantly improve the frequency regulation capability,and almost have no influence on the working status of the load.It can also significantly improve the dynamic performance of system frequency.The proposed controller can provide technical support for the frequency regulation of new power systems with high proportion of RESs.展开更多
基金supported by the International Education Research Special Project of Zhejiang University of Science and Technology(No.2022IERC005).
文摘In modern broadband communication systems,radio frequency power amplifiers suffer from severe nonlinear distortion and memory effects.To accurately analyze the impact of their characteristics on communication systems,it is necessary to establish precise amplifier models.In recent years,deep neural networks have been widely applied to power amplifier modeling.In order to describe the complex dynamic characteristics of power amplifiers,the deep neural network often requires a large number of hidden layers,which leads to large model scale and difficulties in training.To address this issue,a novel behavioral model is proposed in this paper.It combines the classical Saleh model with a deep feedforward neural network.Since the Saleh model can be identified using the least squares method without requiring iterative gradient algorithms,the computational load of model training is significantly reduced.Simulation results demonstrate that,compared to deep neural network models with equivalent parameter quantities,the proposed model exhibits higher accuracy and faster convergence.
文摘In order to prepare the shielding fabrics with high efficiency of power frequency(PF)shielding and excellent electrical conductivity,different ratios of aramid/stainless steel fiber blended yarns were used to weave the shielding fabrics with different specifications.The fabric structure,fabric areal density,number of fabric layers,embedding ratio of copper-clad wires wrapped aramid yarns(denoted as CCWWA)and embedding direction were designed,and a total of 34 different types of shielding fabrics were woven for testing.The experiments were mainly conducted to study the influence mechanism of various factors on the PF shielding effectiveness by testing the electrical conductivity and PF shielding effectiveness of the fabrics.The research results indicate that the PF shielding effectiveness improves with increasing fabric areal density and metal fiber content.The fabrics embedded with CCWWA,particularly those with bidirectional embedding,exhibit a significant enhancement in the PF shielding effectiveness,showing an increase of 8-20 dB compared to the fabrics without CCWWA.The PF shielding effectiveness varies across different fabric structures,with plain weave fabrics demonstrating the superior PF shielding effectiveness due to their compact structure.Non-conductive base fabric has minimal impact on the PF shielding effectiveness.As the number of fabric layers increases,the PF shielding effectiveness initially improves but then declines,peaking with double-layer fabrics.
基金supported by the Science and Technology Development Project of Jilin Province(Project No.YDZJ202301ZYTS284).
文摘With the increasing penetration of renewable energy,the coordination of energy storage with thermal power for frequency regulation has become an effective means to enhance grid frequency security.Addressing the challenge of improving the frequency regulation performance of a thermal-storage primary frequency regulation system while reducing its associated losses,this paper proposes a multi-dimensional cooperative optimization strategy for the control parameters of a combined thermal-storage system,considering regulation losses.First,the frequency regulation losses of various components within the thermal power unit are quantified,and a calculation method for energy storage regulation loss is proposed,based on Depth of Discharge(DOD)and C-rate.Second,a thermal-storage cooperative control method based on series compensation is developed to improve the system’s frequency regulation performance.Third,targeting system regulation loss cost and regulation output,and considering constraints on output overshoot and system parameters,an improved Particle Swarm Optimization(PSO)algorithm is employed to tune the parameters of the low-pass filter and the series compensator,thereby reducing regulation losses while enhancing performance.Finally,simulation results demonstrate that the total loss cost of the proposed control strategy is comparable to that of a system with only thermal power participation.However,the thermal power loss cost is reduced by 42.16%compared to the thermal-only case,while simultaneously improving system frequency stability.Thus,the proposed strategy effectively balances system frequency stability and economic efficiency.
基金National Natural Science Foundation of China!(No.59738150)
文摘Based on the piezo-optic effect of medium, the refractive index of medium is the function of its density, and so it's also the function of acoustic pressure. Therefore, acoustic pressure in the optical path everywhere can be determined absolutely by laser-interferometric technique and relative distribution of pressure in the middle and far acoustic field, which can be obtained from theory or experiment respectively. Theory and experiment of measurement of pressure in acoustic field with laser-interferometer are introduced. Distribution of pressure radiated by a power ultrasonic transducer is determined by laser interferometric technique. The theoretical and experimental results are in good agreement. The receiving sensitivity of a PVDF (Polyvinylidene fluoride) transducer in free field is also calibrated absolutely due to above results and its sensitivity is -118.5 dB.
基金the Ministerial Level Advanced Research Foundation (41302010107)
文摘Amplified spontaneous emission （ASE） in diode laser pumped double-clad fiber power amplifiers is studied experimentally, The dependences of ASE on fiber length and cross section of active core are discussed and the variations of ASE power as the function of pumping and signal power are investigated. There are indications that long fibers with large mode area need stronger input signals to suppress ASE. It is shown that a 150 mW input signal can suppress the ASE by 40 dB in a 4 m large mode area fiber, while to efficiently suppress the ASE in a 10 m fiber, stronger input signal is needed. 12.5 W and 16.1 W single frequency CW output power are obtained from 4 m fiber and 10 m fiber respectively. No stimulated Brillouin scattering （SBS） was observed
文摘In most earlier ferroresonance studies the traditional excitation characteristic of iron core, in which the traditional excitation characteristic contains harmonic voltages or currents, has been used as if it were made up of pure fundamental voltage or current. However, this is not always true. In comparison with traditional excitation characteristics, this paper introduces the power frequency excitation characteristic of the iron core, which contains no harmonics. The power frequency excitation characteristic of iron core has been obtained by Elector Magnetic Transient Program, resulting in discrete voltage and current pairs. Extensive simulations are carried out to analyse the effect of power frequency excitation characteristic on potential transformer ferroresonance. A detailed analysis of simulation results demonstrates that with power frequency excitation characteristic of iron core inclusion at certain excitation voltage the ferroresonance may happen, conversely it may not happen with traditional excitation characteristic inclusion.
文摘To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail transit. The proposed system consists of a main substation （MSS） and cable traction network （CTN）. The MSS includes a single-phase main traction transformer and a negative-se- quence compensation device, while the CTN includes double-core cables, traction transformers, overhead catenary system, rails, etc. Several key techniques for the proposed system were put forward and discussed, which can be summarized as （1） the power supply principle, equivalent circuit and transmission ability of the CTN, the cable-catenary matching technique, and the selection of catenary voltage level; （2） the segmentation technology and status identification method for traction power supply network, distributed and centralized protection schemes, etc.; （3） a power supply scheme for single-line MSS and a power supply scheme of MSS shared by two or more lines. The proposed industrial frequency single-phase AC traction power supply system shows an excellent technical performance, good economy, and high reliability, hence provides a new alternative for metro and urban rail transit power supply systems.
文摘This paper analyzes and studies the problems of frequent system crash, high internal cremation rate and low efficiency in the electric dust control room of Liaoning Diaobingshan Gangue Power Generation Co., Ltd., upgrades the control system, replaces the rapping beam, adjusts the spacing between the substrate and the pole line, and increases the efficiency of electric dust removal. At the same time, it can save energy and reduce consumption.
基金National Natural Science Foundation of China(No.10475010)
文摘Plasma polymerized maleic anhydride （MA） was carried out by using maleic anhydride supersaturated ethanol solution as a precursor in a dielectric barrier discharge （DBD）. The film properties were characterized by water contact angle （WCA）, Fourier transfer infrared （FTIR）, X-ray photoelectron spectroscopy （XPS）, atomic force microscope （AFM） analysis, and a thickness profilometer. The influence of the processing parameters on the film properties such as tile power frequency and polymerization zone was investigated. The results show that anhydride group incorporated into the growing films is favorable at the frequency of 80 kHz and working pressure of 50 Pa. The poly （maleic anhydride） film is uniform and compact at an average deposition rate of 8 nm/min.
文摘This paper presents a brief overview of several promising design technologies for high efficiency silicon-based radio frequency （RF） power amplifiers （PAs） as well as the use of these technologies in mobile broadband wireless communications. Four important aspects of PA design are addressed in this paper. First, we look at class-E PA design equations and provide an example of a class-E PA that achieves efficiency of 65-70% at 2.4 GHz. Then, we discuss state-of-the-art envelope tracking （ET） design for monolithic wideband RF mobile transmitter applications. A brief overview of Doherty PA design for the next-generation wireless handset applications is then given. Towards the end of the paper, we discuss an inherently broadband and highly efficient class-J PA design targeting future multi-band multi-standard wireless communication protocols.
基金supported in part by the National Key R&D Program of China (No.2021YFB2601404)Beijing Natural Science Foundation (No.3232053)National Natural Science Foundation of China (Nos.51929701 and 52127812)。
文摘In contrast to conventional transformers, power electronic transformers, as an integral component of new energy power system, are often subjected to high-frequency and transient electrical stresses, leading to heightened concerns regarding insulation failures. Meanwhile, the underlying mechanism behind discharge breakdown failure and nanofiller enhancement under high-frequency electrical stress remains unclear. An electric-thermal coupled discharge breakdown phase field model was constructed to study the evolution of the breakdown path in polyimide nanocomposite insulation subjected to high-frequency stress. The investigation focused on analyzing the effect of various factors, including frequency, temperature, and nanofiller shape, on the breakdown path of Polyimide(PI) composites. Additionally, it elucidated the enhancement mechanism of nano-modified composite insulation at the mesoscopic scale. The results indicated that with increasing frequency and temperature, the discharge breakdown path demonstrates accelerated development, accompanied by a gradual dominance of Joule heat energy. This enhancement is attributed to the dispersed electric field distribution and the hindering effect of the nanosheets. The research findings offer a theoretical foundation and methodological framework to inform the optimal design and performance management of new insulating materials utilized in high-frequency power equipment.
文摘The PMD-induced pulse broadening may cause the degradation ofreceiver sensitivity and has negative effects on the power spectrumof received signals. The expression s of PMO-induced pulse broadeningeffects on receiver sensitivity are derived based on the concept ofman square pulse width. The effects of PMD on the spectrum ofreceived power are analyzed in detail. Finally, the scheme isdiscussed with which the poser of a certain frequency component isextracted as a feedback control signal in a PMD compensation system.
文摘For solving the dynamic instability problem of Yunnan Provincial Power System (YNPS) and the South China Interconnected Power System (SCIPS), Lubuge Hydropower Station was chosen to install Power System Stabilizer (PSS). This paper introduces the principles and methods of parameter selection for PSS, in addition to field test. The test results show that the PSS installed can significantly improve the system damping.
基金financially supported by Science and Technology Project of Quzhou(Grant Nos.2023K256,2023NC08)Research Grants Program of Department of Education of Zhejiang Province(No.Y202455709)+1 种基金Zhejiang Provincial Natural Science Foundation of China(Grant No.LZY21E050001)University-Enterprise Cooperation Program for Visiting Engineers in Higher Education Institutions in Zhejiang Province(No.FG2020215).
文摘This paper investigates the start-up and shutdown phases of a five-bladed closed-impeller centrifugal pump through experimental analysis,capturing the temporal evolution of its hydraulic performances.The study also predicts the transient characteristics of the pump under non-rated operating conditions to assess the accuracy of various machine learning methods in forecasting its instantaneous performance.Results indicate that the pump’s transient behavior in power-frequency mode markedly differs from that in frequency-conversion mode.Specifically,the power-frequency mode achieves steady-state values faster and exhibits smaller fluctuations before stabilization compared to the other mode.During the start-up phase,as the steady-state flow rate increases,inlet and outlet pressures and head also rise,while torque and shaft power decrease,with rotational speed remaining largely unchanged.Conversely,during the shutdown phase,no significant changes were observed in torque,shaft power,or rotational speed.Six machine learning models,including Gaussian Process Regression(GPR),Decision Tree Regression(DTR),and Deep Learning Networks(DLN),demonstrated high accuracy in predicting the hydraulic performance of the centrifugal pump during the start-up and shutdown phases in both power-frequency and frequency-conversion conditions.The findings provide a theoretical foundation for improved prediction of pump hydraulic performance.For instance,when predicting head and flow rate during power-frequency start-up,GPR achieved absolute and relative errors of 0.54 m(7.84%)and 0.21 m3/h(13.57%),respectively,while the Feedforward Neural Network(FNN)reported errors of 0.98 m(8.24%)and 0.10 m3/h(16.71%).By contrast,the Support Vector Machine Regression(SVMR)and Generalized Additive Model(GAM)generally yielded less satisfactory prediction accuracy compared to the other methods.
基金National Key Research and Development Program of China,Grant/Award Number:2023YFB2407001National Natural Science Foundation of China(Young Scientistic Program),Grant/Award Number:52007148。
文摘The arc faults inside oil-immersed power equipment can produce high-amplitude pres-sure waves inside tanks,which might cause ignition and explosion accidents.This kind of failure is one of the most severe faults for power equipment and has attracted consid-erable attention in recent years.However,due to the high risk of the experiments and the complex development of arc in oil,the characteristics of the pressure wave formed by the arc are still confusing.In this paper,the time-frequency characteristics of pressure waves are analysed using several experiments of 1-8 kA power-frequency arc inside a closed oil tank.The experimental results show that the pressure wave produced by the arc in oil contains three frequency bands,0-500 Hz,500 Hz-40 kHz,and above 40 kHz,which are related to the arc energy,the average current around arc ignition and the metal wire explosion respectively.This helps further understand the formation mechanism of the pressure wave caused by the arc in oil.This paper discusses the influences of ignition wire on arc-formed pressure waves.A wire diameter selection method for arc experiments is established to reduce the pressure differences between wire-ignited arcs and actual arc faults.
文摘An attempt has been made to explore whether the power relation can be obtained from theoretical considerations. The classical laminar and turbulent boundary layer concepts have been employed to determine appropriate values of the scaling lengths associated with vortex shedding and shear layer frequencies to predict the power law relationship with Reynolds number. The predicted results are in good agreement with experimental results. The findings will provide a greater insight into the overall phenomenon involved.
基金National Basic Research Program of China(2006CB604902) Academic Human Resources Development inInstitutions of Higher Learning Under the Jurisdiction of Beijing Municipality(05002015200504)
文摘SiN, films are deposited on silicon wafers through plasma enhanced chemical vapor deposition （PECVD）. The relationship between the film stress and deposition factors is investigated. It is found that low stress films would be obtained by adjusting the ratio of low frequency（LF） power to high frequency（HF） power pulse time or the chamber pressure. The best of the two methods to control stress in the film is changing the percentage of LF power pulse time. The low stress condition is achieved when the percentage of low frequency power pulse time in total time（LF and HF pulse time） is close to 40%, The low stress cantilever of tunable vertical cavity surface emitting laser is obtained by using this deposition condition,
基金Science and Technology Plan Project of Weinan City(No.2020ZDYF-JCYJ-177)Power Supply Technology Innovation Team of Shaanxi Railway Engineering Vocational and Technical College(No.KJTD201901)Graduate Program Funded Project of Shaanxi Railway Engineering Vocational and Technical College Scientific Research Fund(No.KY2018-77)。
文摘A surface electromyography(sEMG)signal acquisition circuit based on high-order filtering is designed.We use a two-stage adjustable amplifier and a high-order Sallen-Key bandpass filter to solve the problems of non-adjustable amplification gain and low filtering order in traditional acquisition circuits.The experimental results show that the designed sEMG signal acquisition device can eliminate power frequency interference effectively,the stopband drop of the filtering part reaches approximately-100 dB/dec,which can effectively extract useful signals between 20-500 Hz,and the amplification gain reaches 60 dB.
基金the Scientific Fund of Shaanxi Province and the Youth Scientific Fund ofShaanxi Normal University
文摘The energy relationships among all the elements, by which the magnetostrictive transducers are manufactured, in Finite Element Method (FEM) are analyzed, then the expres- sions of FEM dynamics equations and performances formulas for magnetostrictive transducers are derived. The vibrating modes of the class VII transducer and its shell vibration are calcu- lated theoretically and the results point out that there is a breathing mode and if the transducer works at this mode, the transducer will vibrate with a greater volume speed and source level.
基金funded by the State Grid Corporation of China(No.SGJSSZ00KJS2310831)"Research and application of key technologies for load flexibility resource mining and power grid regulation driven by industrial Internet".
文摘Renewable energy sources(RESs)are rapidly devel-oping and their substitution for traditional power generation poses significant challenges to the frequency regulation in power systems.The load damping factor D characterizes the active power of load that changes with power system frequency,which is an important factor influencing the frequency response.However,the value of D is small,resulting in the limitation in frequency regulation of the power system.This paper proposes a parallel-type load damping factor controller to enhance load damping factor by utilizing static var generators(SVGs)in substations.Additionally,it discusses the configuration method for the relevant parameters of the controller,evaluates its frequen-cy regulation capability,investigates the impact of large-scale application of the controller on static and dynamic loads,and conducts a comprehensive evaluation of the impact of the damping factor control process on the voltage stability of the main grid.The large-scale application of the proposed controller can significantly improve the frequency regulation capability,and almost have no influence on the working status of the load.It can also significantly improve the dynamic performance of system frequency.The proposed controller can provide technical support for the frequency regulation of new power systems with high proportion of RESs.
