The frequency regulation reserve setting of wind-PV-storage power stations is crucial.However,the existing grid codes set up the station reserve in a static manner,where the synchronous generator characteristics and f...The frequency regulation reserve setting of wind-PV-storage power stations is crucial.However,the existing grid codes set up the station reserve in a static manner,where the synchronous generator characteristics and frequency-step disturbance scenario are considered.Thus,the advantages of flexible regulation of renewable generations are wasted,resulting in excessive curtailment of wind and solar resources.In this study,a method for optimizing the frequency regulation reserve of wind PV storage power stations was developed.Moreover,a station frequency regulation model was constructed,considering the field dynamic response and the coupling between the station and system frequency dynamics.Furthermore,a method for the online evaluation of the station frequency regulation was proposed based on the benchmark governor fitting.This method helps in overcoming the capacity-based reserve static setting.Finally,an optimization model was developed,along with the proposal of the linearized solving algorithm.The field data from the JH4#station in China’s MX power grid was considered for validation.The proposed method achieves a 24.77%increase in the station income while ensuring the system frequency stability when compared with the grid code-based method.展开更多
Understanding of the mechanisms of neural phase transitions is crucial for clarifying cognitive processes in the brain. We investigate a neural oscillator that undergoes different bifurcation transitions from the big ...Understanding of the mechanisms of neural phase transitions is crucial for clarifying cognitive processes in the brain. We investigate a neural oscillator that undergoes different bifurcation transitions from the big saddle homoclinic orbit type to the saddle node on an invariant circle type, and the saddle node on an invariant circle type to the small saddle homoclinic orbit type. The bifurcation transitions are accompanied by an increase in thermodynamic temperature that affects the voltage-gated ion channel in the neural oscillator. We show that nonlinear and thermodynamical mechanisms are responsible for different switches of the frequency in the neural oscillator. We report a dynamical role of the phase response curve in switches of the frequency, in terms of slopes of frequency-temperature curve at each bifurcation transition. Adopting the transition state theory of voltagegated ion channel dynamics, we confirm that switches of the frequency occur in the first-order phase transition temperature states and exhibit different features of their potential energy derivatives in the ion channel. Each bifurcation transition also creates a discontinuity in the Arrhenius plot used to compute the time constant of the ion channel.展开更多
The static comer frequency and dynamic comer frequency in stochastic synthesis of ground motion from fi- nite-fault modeling are introduced, and conceptual disadvantages of the two are discussed in this paper. Further...The static comer frequency and dynamic comer frequency in stochastic synthesis of ground motion from fi- nite-fault modeling are introduced, and conceptual disadvantages of the two are discussed in this paper. Furthermore, the non-uniform radiation of seismic wave on the fault plane, as well as the trend of the larger rupture area, the lower comer frequency, can be described by the source spectral model developed by the authors. A new dynamic comer frequency can be developed directly from the model. The dependence of ground motion on the size of subfault can be eliminated if this source spectral model is adopted in the synthesis. Finally, the approach presented is validated from the comparison between the synthesized and observed ground motions at six rock stations during the Northridge earthquake in 1994.展开更多
A dynamic frequency-based parameter identification approach is applied for the nonlinear system with periodic responses.Starting from the energy equation,the presented method uses a dynamic frequency to precisely obta...A dynamic frequency-based parameter identification approach is applied for the nonlinear system with periodic responses.Starting from the energy equation,the presented method uses a dynamic frequency to precisely obtain the analytical limit cycle expression of nonlinear system and utilizes it as the mathematic foundation for parameter identification.Distinguished from the time-domain approaches,the strategy of using limit cycle to describe the system response is unaffected by the influence of phase change.The analytical expression is fitted with the value sets from phase coordinates measured in periodic oscillation of the nonlinear systems,and the unknown parameters are identified with the interior-reflective Newton method.Then the performance of this identification methodology is verified by an oscillator with nonlinear stiffness and damping.Besides,numerical simulations under noisy environment also verify the efficiency and robustness of the identification procedure.Finally,we apply this parameter identification method to the modeling of a large-amplitude energy harvester,to improve the accuracy of mechanical modeling.Not surprisingly,good agreement is achieved between the experimental data and identified parameters.It also verifies that the proposed approach is less time-consuming and more accuracy in identification procedure.展开更多
In view of the influence and harm of low frequency vibration environment on the structure of spaceflight products,a low frequency dynamic study method for piezoelectric sensor based on the dynamic system of sinusoidal...In view of the influence and harm of low frequency vibration environment on the structure of spaceflight products,a low frequency dynamic study method for piezoelectric sensor based on the dynamic system of sinusoidal pressure is proposed.This method uses a sinusoidal pressure dynamic system with two-way dual channel import and export synchronization technology to study the low frequency characteristics of a piezoelectric sensor of PCB company,and its lower cut-off frequency is 0.26 Hz.It is also studied that when the frequency of the measured vibration or shock signal is 1-200 kHz,the error range of signal positive pressure action time is 4.87%-0.03%.The dynamic compensation for the low frequency of the vibration sensor is carried out,and the compensation effect is good.展开更多
A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose...A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose is derived without using any theoretical model, so the confidence of the identified model is increased, and then the 6 degrees of freedom rigid body model is extended to 9 degrees of freedom high-order model. Bode sensitivity function is derived to increase the accuracy of frequency spectra calculation which influences the accuracy of model parameter identification. Then a frequency domain identification algorithm is established. Acceleration technique is developed furthermore to increase calculation efficiency, and the total identification time is reduced by more than 50% using this technique. A comprehensive two-step method is established for helicopter high-order flight dynamics model identification which increases the numerical stability of model identification compared with single step algorithm. Application of the developed method to identify the flight dynamics model of BO 105 helicopter based on flight test data is implemented. A comparative study between the high-order model and rigid body model is performed at last. The results show that the developed method can be used for helicopter high-order flight dynamics model identification with high accuracy as well as efficiency, and the advantage of identified high-order model is very obvious compared with low-order model.展开更多
The threat to information security from electromagnetic pollution has sparked widespread interest in the development of microwave absorption materials(MAMs).Although considerable progress has been made in high-perform...The threat to information security from electromagnetic pollution has sparked widespread interest in the development of microwave absorption materials(MAMs).Although considerable progress has been made in high-performance MAMs,little attention was paid to their absorption frequency regulation to respond to variable input frequencies and their stability and durability to cope with complex environments.Here,a highly compressible polyimide-packaging carbon nanocoils/carbon foam(PI@CNCs/CF)fabricated by a facile vacuum impregnation method is reported to be used as a dynamically frequency-tunable and environmentally stable microwave absorber.PI@CNCs/CF exhibits good structural stability and mechanical properties,which allows precise absorption frequency tuning by simply changing its compression ratio.For the first time,the tunable effective absorption bandwidth can cover the whole test frequency band(2−18 GHz)with the broadest effective absorption bandwidth of 10.8 GHz and the minimum reflection loss of−60.5 dB.Moreover,PI@CNCs/CF possesses excellent heat insulation,infrared stealth,self-cleaning,flame retardant,and acid-alkali corrosion resistance,which endows it high reliability even under various harsh environments and repeated compression testing.The frequency-tunable mechanism is elucidated by combining experiment and simulation results,possibly guiding in designing dynamically frequency-tunable MAMs with good environmental stability in the future.展开更多
A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequenc...A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequencies are equal to those for switching off electric resistances. This paper analyzes and determines systemnatural frequencies based on a modeling method of receptances with the analysis of sub-systems model and of theprinciple of their addition and conveyor loop closure. It also puts forward to calculate the time interval for switching off electric resistances. The starting of one conveyor is simulated by lumped-mass-spring-model software tofurther illustrate the influence of time interval for switching off electric resistances on conveyor dynamic behavior. Two methods are also compared. The receptance model is proved to be an excellent alternative.展开更多
The dynamic responses of suspension system of a vehicle travelling at varying speeds are generally nonstationary random processes,and the non-stationary random analysis has become an important and complex problem in v...The dynamic responses of suspension system of a vehicle travelling at varying speeds are generally nonstationary random processes,and the non-stationary random analysis has become an important and complex problem in vehicle ride dynamics in the past few years.This paper proposes a new concept,called dynamic frequency domain(DFD),based on the fact that the human body holds different sensitivities to vibrations at different frequencies,and applies this concept to the dynamic assessment on non-stationary vehicles.The study mainly includes two parts,the first is the input numerical calculation of the front and the rear wheels,and the second is the dynamical response analysis of suspension system subjected to non-stationary random excitations.Precise time integration method is used to obtain the vertical acceleration of suspension barycenter and the pitching angular acceleration,both root mean square(RMS)values of which are illustrated in different accelerating cases.The results show that RMS values of non-stationary random excitations are functions of time and increase as the speed increases at the same time.The DFD of vertical acceleration is finally analyzed using time-frequency analysis technique,and the conclusion is obviously that the DFD has a trend to the low frequency region,which would be significant reference for active suspension design under complex driving conditions.展开更多
In the wireless guidance system, the signals that receiver received has obvious Doppler shift for the high dynamic characteristic of the carrier. A new solution of carrier frequency tracking loop with frequency modify...In the wireless guidance system, the signals that receiver received has obvious Doppler shift for the high dynamic characteristic of the carrier. A new solution of carrier frequency tracking loop with frequency modifying system is put forward. The characteristic of cross product auto frequency control and the second order loop filter in this loop are analyzed. The simulation shows that this loop can accomplish frequency tracking well in high dynamic circumstance.展开更多
In this letter, a scheduling scheme based on Dynamic Frequency Clocking (DFC) and multiple voltages is proposed for low power designs under the timing and the resource constraints. Unlike the conventional methods at h...In this letter, a scheduling scheme based on Dynamic Frequency Clocking (DFC) and multiple voltages is proposed for low power designs under the timing and the resource constraints. Unlike the conventional methods at high level synthesis where only voltages of nodes were considered, the scheme based on a gain function considers both voltage and frequency simultaneously to reduce energy consumption. Experiments with a number of DSP benchmarks show that the proposed scheme achieves an effective energy reduction.展开更多
In the dynamic stability analysis of a caisson breakwater, most of current studies pay attention to the motion characteristics of caisson breakwaters under a single periodical breaking wave excitation. And in the life...In the dynamic stability analysis of a caisson breakwater, most of current studies pay attention to the motion characteristics of caisson breakwaters under a single periodical breaking wave excitation. And in the lifetime stability analysis of caisson breakwater, it is assumed that the caisson breakwater suffers storm wave excitation once annually in the design lifetime. However, the number of annual severe storm occurrence is a random variable. In this paper, a series of random waves are generated by the Wen Sheng-chang wave spectrum, and the histories of successive and long-term random wave forces are built up by using the improved Goda wave force model. It is assumed that the number of annual severe storm occurrence is in the Poisson distribution over the 50-year design lifetime, and the history of random wave excitation is generated for each storm by the wave spectrum. The response histories of the caisson breakwater to the random waves over 50-year design lifetime are calculated and taken as a set of samples. On the basis of the Monte Carlo simulation technique, a large number of samples can be obtained, and the probability assessment of the safety of the breakwater during the complete design lifetime is obtained by statistical analysis of a large number of samples. Finally, the procedure of probability assessment of the breakwater safety is illustrated by an example.展开更多
A 2.5Gb/s clock and data recovery （CDR） circuit is designed and realized in TSMC＇s standard 0.18/μm CMOS process. The clock recovery is based on a PLL. For phase noise optimization,a dynamic phase and frequency de...A 2.5Gb/s clock and data recovery （CDR） circuit is designed and realized in TSMC＇s standard 0.18/μm CMOS process. The clock recovery is based on a PLL. For phase noise optimization,a dynamic phase and frequency detector （PFD） is used in the PLL. The rms jitter of the recovered 2.5GHz clock is 2.4ps and the SSB phase noise is - 111dBc/Hz at 10kHz offset. The rms jitter of the recovered 2.5Gb/s data is 3.3ps. The power consumption is 120mW.展开更多
The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper us...The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper used the dynamic module of FLAC3D to study the response characteristics of deep super-large section chamber under dynamic and static combined loading condition.Results showed that under the static loading condition,the maximum vertical stress,deformation and failure range are large,where the stress concentration coefficient is 1.64.The maximum roof-to-floor and two-sides deformations are 54.6 mm and 53.1 mm,respectively.Then,under the dynamic and static combined loading condition:(1)The influence of dynamic load frequency on the two-sides is more obvious;(2)The dynamic load amplitude has the greatest influence on the stress concentration degree,and the plastic failure tends to develop to the deeper;(3)With the dynamic load source distance increase,the response of surrounding rock is gradually attenuated.On this basis,empirical equations for each dynamic load conditions were obtained by using regression analysis method,and all correlation coefficients are greater than 0.99.This research provided reference for the supporting design of deep super-large section chamber under same or similar conditions.展开更多
Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster ...Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster is important for both cluster sensing capabilities and its autonomous operating. However, the existing time synchronization methods are not suitable for microsatellite cluster, because it requires too many human interventions and occupies too much ground control resource. Although, data post-process may realize the equivalent time synchronization, it requires processing time and powerful computing ability on the ground, which cannot be implemented by cluster itself. In order to autonomously establish and maintain the time benchmark in a cluster, we propose a compact time difference compensation system（TDCS）, which is a kind of time control loop that dynamically adjusts the satellite reference frequency according to the time difference. Consequently, the time synchronization in the cluster can be autonomously achieved on-orbit by synchronizing the clock of other satellites to a chosen one＇s. The experimental result shows that the standard deviation of time synchronization is about 102 ps when the carrier to noise ratio（CNR） is 95 d BHz, and the standard deviation of corresponding frequency difference is approximately0.36 Hz.展开更多
Energy efficiency has become one of the top design criteria for current computing systems. The Dynamic Voltage and Frequency Scaling （DVFS） has been widely adopted by laptop computers, servers, and mobile devices to...Energy efficiency has become one of the top design criteria for current computing systems. The Dynamic Voltage and Frequency Scaling （DVFS） has been widely adopted by laptop computers, servers, and mobile devices to conserve energy, while the GPU DVFS is still at a certain early age. This paper aims at exploring the impact of GPU DVFS on the application performance and power consumption, and furthermore, on energy conservation. We survey the state-of-the-art GPU DVFS characterizations, and then summarize recent research works on GPU power and performance models. We also conduct real GPU DVFS experiments on NVIDIA Fermi and Maxwell GPUs. According to our experimental results, GPU DVFS has significant potential for energy saving. The effect of scaling core voltage/frequency and memory voltage/frequency depends on not only the GPLI architectures, but also the characteristic of GPU applications.展开更多
Recently,Multicore systems use Dynamic Voltage/Frequency Scaling(DV/FS)technology to allow the cores to operate with various voltage and/or frequencies than other cores to save power and enhance the performance.In thi...Recently,Multicore systems use Dynamic Voltage/Frequency Scaling(DV/FS)technology to allow the cores to operate with various voltage and/or frequencies than other cores to save power and enhance the performance.In this paper,an effective and reliable hybridmodel to reduce the energy and makespan in multicore systems is proposed.The proposed hybrid model enhances and integrates the greedy approach with dynamic programming to achieve optimal Voltage/Frequency(Vmin/F)levels.Then,the allocation process is applied based on the availableworkloads.The hybrid model consists of three stages.The first stage gets the optimum safe voltage while the second stage sets the level of energy efficiency,and finally,the third is the allocation stage.Experimental results on various benchmarks show that the proposed model can generate optimal solutions to save energy while minimizing the makespan penalty.Comparisons with other competitive algorithms show that the proposed model provides on average 48%improvements in energy-saving and achieves an 18%reduction in computation time while ensuring a high degree of system reliability.展开更多
We developed a modified stochastic finite-fault method for estimating strong ground motions.An adjustment to the dynamic corner frequency was introduced,which accounted for the effect of the location of the subfault r...We developed a modified stochastic finite-fault method for estimating strong ground motions.An adjustment to the dynamic corner frequency was introduced,which accounted for the effect of the location of the subfault relative to the hypocenter and rupture propagation direction,to account for the influence of the rupture propagation direction on the subfault dynamic corner frequency.By comparing the peak ground acceleration(PGA),pseudo-absolute response spectra acceleration(PSA,damping ratio of 5%),and duration,the results of the modified and existing methods were compared,demonstrating that our proposed adjustment to the dynamic corner frequency can accurately reflect the rupture directivity effect.We applied our modified method to simulate near-field strong motions within 150 km of the 2008 MW7.9 Wenchuan earthquake rupture.Our modified method performed well over a broad period range,particularly at 0.04-4 s.The total deviations of the stochastic finite-fault method(EXSIM)and the modified EXSIM were 0.1676 and 0.1494,respectively.The modified method can effectively account for the influence of the rupture propagation direction and provide more realistic ground motion estimations for earthquake disaster mitigation.展开更多
The study is carried out in imperfect contact with a concrete slab wall attached to a panel based on rice straw compressed in a dynamic frequency regime. We will propose the characterization of thermal insulation for ...The study is carried out in imperfect contact with a concrete slab wall attached to a panel based on rice straw compressed in a dynamic frequency regime. We will propose the characterization of thermal insulation for thermal resistance of contact (<i><span style="font-family:Verdana;">x</span></i><span style="font-family:Verdana;"> = 0.05 m). The impact of heat exchange coefficients on the front face (</span><i><span style="font-family:Verdana;">x</span></i><span style="font-family:Verdana;"> = 0 m) and the rear face (</span><i><span style="font-family:Verdana;">x</span></i><span style="font-family:Verdana;"> = 0.1 m) on these resistors is shown.</span>展开更多
基金supported by the Scientific Research Project of China Three Gorges Group Co.LTD(Contract Number:202103368).
文摘The frequency regulation reserve setting of wind-PV-storage power stations is crucial.However,the existing grid codes set up the station reserve in a static manner,where the synchronous generator characteristics and frequency-step disturbance scenario are considered.Thus,the advantages of flexible regulation of renewable generations are wasted,resulting in excessive curtailment of wind and solar resources.In this study,a method for optimizing the frequency regulation reserve of wind PV storage power stations was developed.Moreover,a station frequency regulation model was constructed,considering the field dynamic response and the coupling between the station and system frequency dynamics.Furthermore,a method for the online evaluation of the station frequency regulation was proposed based on the benchmark governor fitting.This method helps in overcoming the capacity-based reserve static setting.Finally,an optimization model was developed,along with the proposal of the linearized solving algorithm.The field data from the JH4#station in China’s MX power grid was considered for validation.The proposed method achieves a 24.77%increase in the station income while ensuring the system frequency stability when compared with the grid code-based method.
基金Supported by JST,CREST,and JSPS KAKENHI under Grant No 15H05919
文摘Understanding of the mechanisms of neural phase transitions is crucial for clarifying cognitive processes in the brain. We investigate a neural oscillator that undergoes different bifurcation transitions from the big saddle homoclinic orbit type to the saddle node on an invariant circle type, and the saddle node on an invariant circle type to the small saddle homoclinic orbit type. The bifurcation transitions are accompanied by an increase in thermodynamic temperature that affects the voltage-gated ion channel in the neural oscillator. We show that nonlinear and thermodynamical mechanisms are responsible for different switches of the frequency in the neural oscillator. We report a dynamical role of the phase response curve in switches of the frequency, in terms of slopes of frequency-temperature curve at each bifurcation transition. Adopting the transition state theory of voltagegated ion channel dynamics, we confirm that switches of the frequency occur in the first-order phase transition temperature states and exhibit different features of their potential energy derivatives in the ion channel. Each bifurcation transition also creates a discontinuity in the Arrhenius plot used to compute the time constant of the ion channel.
基金supported by National Natural Science Foundation of China under grant No. 50778058 and 90715038National Key Technology Research and Development Program under grant No. 2006BAC13B02
文摘The static comer frequency and dynamic comer frequency in stochastic synthesis of ground motion from fi- nite-fault modeling are introduced, and conceptual disadvantages of the two are discussed in this paper. Furthermore, the non-uniform radiation of seismic wave on the fault plane, as well as the trend of the larger rupture area, the lower comer frequency, can be described by the source spectral model developed by the authors. A new dynamic comer frequency can be developed directly from the model. The dependence of ground motion on the size of subfault can be eliminated if this source spectral model is adopted in the synthesis. Finally, the approach presented is validated from the comparison between the synthesized and observed ground motions at six rock stations during the Northridge earthquake in 1994.
基金supported by the National Natural Science Foundation of China(Grants 11772218 and 11872044)China-UK NSFC-RS Joint Project(Grants 11911530177 in China and IE 181496 in UK)+1 种基金Tianjin Research Program of Application Foundation and Advanced Technology(Grant 17JCYBJC18900)the National Key Research and Development Program of China(Grant 2018YFB0106200).
文摘A dynamic frequency-based parameter identification approach is applied for the nonlinear system with periodic responses.Starting from the energy equation,the presented method uses a dynamic frequency to precisely obtain the analytical limit cycle expression of nonlinear system and utilizes it as the mathematic foundation for parameter identification.Distinguished from the time-domain approaches,the strategy of using limit cycle to describe the system response is unaffected by the influence of phase change.The analytical expression is fitted with the value sets from phase coordinates measured in periodic oscillation of the nonlinear systems,and the unknown parameters are identified with the interior-reflective Newton method.Then the performance of this identification methodology is verified by an oscillator with nonlinear stiffness and damping.Besides,numerical simulations under noisy environment also verify the efficiency and robustness of the identification procedure.Finally,we apply this parameter identification method to the modeling of a large-amplitude energy harvester,to improve the accuracy of mechanical modeling.Not surprisingly,good agreement is achieved between the experimental data and identified parameters.It also verifies that the proposed approach is less time-consuming and more accuracy in identification procedure.
文摘In view of the influence and harm of low frequency vibration environment on the structure of spaceflight products,a low frequency dynamic study method for piezoelectric sensor based on the dynamic system of sinusoidal pressure is proposed.This method uses a sinusoidal pressure dynamic system with two-way dual channel import and export synchronization technology to study the low frequency characteristics of a piezoelectric sensor of PCB company,and its lower cut-off frequency is 0.26 Hz.It is also studied that when the frequency of the measured vibration or shock signal is 1-200 kHz,the error range of signal positive pressure action time is 4.87%-0.03%.The dynamic compensation for the low frequency of the vibration sensor is carried out,and the compensation effect is good.
基金the support of the Fund of Key Laboratory of Chinaa Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions of China
文摘A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose is derived without using any theoretical model, so the confidence of the identified model is increased, and then the 6 degrees of freedom rigid body model is extended to 9 degrees of freedom high-order model. Bode sensitivity function is derived to increase the accuracy of frequency spectra calculation which influences the accuracy of model parameter identification. Then a frequency domain identification algorithm is established. Acceleration technique is developed furthermore to increase calculation efficiency, and the total identification time is reduced by more than 50% using this technique. A comprehensive two-step method is established for helicopter high-order flight dynamics model identification which increases the numerical stability of model identification compared with single step algorithm. Application of the developed method to identify the flight dynamics model of BO 105 helicopter based on flight test data is implemented. A comparative study between the high-order model and rigid body model is performed at last. The results show that the developed method can be used for helicopter high-order flight dynamics model identification with high accuracy as well as efficiency, and the advantage of identified high-order model is very obvious compared with low-order model.
基金supported by the National Natural Science Foundation of China(grants 22278101,22068010,and 52365044)the Natural Science Foundation of Hainan Province(grants 120RC454 and 519QN176)the Innovation Project for Scientific and Technological Talents in Hainan Province(grant KJRC2023C08)。
文摘The threat to information security from electromagnetic pollution has sparked widespread interest in the development of microwave absorption materials(MAMs).Although considerable progress has been made in high-performance MAMs,little attention was paid to their absorption frequency regulation to respond to variable input frequencies and their stability and durability to cope with complex environments.Here,a highly compressible polyimide-packaging carbon nanocoils/carbon foam(PI@CNCs/CF)fabricated by a facile vacuum impregnation method is reported to be used as a dynamically frequency-tunable and environmentally stable microwave absorber.PI@CNCs/CF exhibits good structural stability and mechanical properties,which allows precise absorption frequency tuning by simply changing its compression ratio.For the first time,the tunable effective absorption bandwidth can cover the whole test frequency band(2−18 GHz)with the broadest effective absorption bandwidth of 10.8 GHz and the minimum reflection loss of−60.5 dB.Moreover,PI@CNCs/CF possesses excellent heat insulation,infrared stealth,self-cleaning,flame retardant,and acid-alkali corrosion resistance,which endows it high reliability even under various harsh environments and repeated compression testing.The frequency-tunable mechanism is elucidated by combining experiment and simulation results,possibly guiding in designing dynamically frequency-tunable MAMs with good environmental stability in the future.
文摘A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequencies are equal to those for switching off electric resistances. This paper analyzes and determines systemnatural frequencies based on a modeling method of receptances with the analysis of sub-systems model and of theprinciple of their addition and conveyor loop closure. It also puts forward to calculate the time interval for switching off electric resistances. The starting of one conveyor is simulated by lumped-mass-spring-model software tofurther illustrate the influence of time interval for switching off electric resistances on conveyor dynamic behavior. Two methods are also compared. The receptance model is proved to be an excellent alternative.
基金This work was supported by the National Natural Science Foundation of China(No.51705205)。
文摘The dynamic responses of suspension system of a vehicle travelling at varying speeds are generally nonstationary random processes,and the non-stationary random analysis has become an important and complex problem in vehicle ride dynamics in the past few years.This paper proposes a new concept,called dynamic frequency domain(DFD),based on the fact that the human body holds different sensitivities to vibrations at different frequencies,and applies this concept to the dynamic assessment on non-stationary vehicles.The study mainly includes two parts,the first is the input numerical calculation of the front and the rear wheels,and the second is the dynamical response analysis of suspension system subjected to non-stationary random excitations.Precise time integration method is used to obtain the vertical acceleration of suspension barycenter and the pitching angular acceleration,both root mean square(RMS)values of which are illustrated in different accelerating cases.The results show that RMS values of non-stationary random excitations are functions of time and increase as the speed increases at the same time.The DFD of vertical acceleration is finally analyzed using time-frequency analysis technique,and the conclusion is obviously that the DFD has a trend to the low frequency region,which would be significant reference for active suspension design under complex driving conditions.
文摘In the wireless guidance system, the signals that receiver received has obvious Doppler shift for the high dynamic characteristic of the carrier. A new solution of carrier frequency tracking loop with frequency modifying system is put forward. The characteristic of cross product auto frequency control and the second order loop filter in this loop are analyzed. The simulation shows that this loop can accomplish frequency tracking well in high dynamic circumstance.
基金the Natural Science Foundation of Hei- longjiang Province, China (F2004-17).
文摘In this letter, a scheduling scheme based on Dynamic Frequency Clocking (DFC) and multiple voltages is proposed for low power designs under the timing and the resource constraints. Unlike the conventional methods at high level synthesis where only voltages of nodes were considered, the scheme based on a gain function considers both voltage and frequency simultaneously to reduce energy consumption. Experiments with a number of DSP benchmarks show that the proposed scheme achieves an effective energy reduction.
基金financially supported by the National Natural Science Foundation of China(Grant No.51279128)the Innovative Research Group Science Foundation(Grant No.51321065)the Construction Science and Technology Project of Ministry of Transport of the People’s Republic of China(Grant No.2013328224070)
文摘In the dynamic stability analysis of a caisson breakwater, most of current studies pay attention to the motion characteristics of caisson breakwaters under a single periodical breaking wave excitation. And in the lifetime stability analysis of caisson breakwater, it is assumed that the caisson breakwater suffers storm wave excitation once annually in the design lifetime. However, the number of annual severe storm occurrence is a random variable. In this paper, a series of random waves are generated by the Wen Sheng-chang wave spectrum, and the histories of successive and long-term random wave forces are built up by using the improved Goda wave force model. It is assumed that the number of annual severe storm occurrence is in the Poisson distribution over the 50-year design lifetime, and the history of random wave excitation is generated for each storm by the wave spectrum. The response histories of the caisson breakwater to the random waves over 50-year design lifetime are calculated and taken as a set of samples. On the basis of the Monte Carlo simulation technique, a large number of samples can be obtained, and the probability assessment of the safety of the breakwater during the complete design lifetime is obtained by statistical analysis of a large number of samples. Finally, the procedure of probability assessment of the breakwater safety is illustrated by an example.
文摘A 2.5Gb/s clock and data recovery （CDR） circuit is designed and realized in TSMC＇s standard 0.18/μm CMOS process. The clock recovery is based on a PLL. For phase noise optimization,a dynamic phase and frequency detector （PFD） is used in the PLL. The rms jitter of the recovered 2.5GHz clock is 2.4ps and the SSB phase noise is - 111dBc/Hz at 10kHz offset. The rms jitter of the recovered 2.5Gb/s data is 3.3ps. The power consumption is 120mW.
基金Project(2018YFC0604703)supported by the National Key R&D Program of ChinaProjects(51804181,51874190)supported by the National Natural Science Foundation of China+3 种基金Project(ZR2018QEE002)supported by the Shandong Province Natural Science Fund,ChinaProject(ZR2018ZA0603)supported by the Major Program of Shandong Province Natural Science Foundation,ChinaProject(2019GSF116003)supported by the Key R&D Project of Shandong Province,ChinaProject(SDKDYC190234)supported by the Shandong University of Science and Technology,Graduate Student Technology Innovation Project,China。
文摘The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper used the dynamic module of FLAC3D to study the response characteristics of deep super-large section chamber under dynamic and static combined loading condition.Results showed that under the static loading condition,the maximum vertical stress,deformation and failure range are large,where the stress concentration coefficient is 1.64.The maximum roof-to-floor and two-sides deformations are 54.6 mm and 53.1 mm,respectively.Then,under the dynamic and static combined loading condition:(1)The influence of dynamic load frequency on the two-sides is more obvious;(2)The dynamic load amplitude has the greatest influence on the stress concentration degree,and the plastic failure tends to develop to the deeper;(3)With the dynamic load source distance increase,the response of surrounding rock is gradually attenuated.On this basis,empirical equations for each dynamic load conditions were obtained by using regression analysis method,and all correlation coefficients are greater than 0.99.This research provided reference for the supporting design of deep super-large section chamber under same or similar conditions.
基金supported by the National Natural Science Foundation of China(61401389)the Joint Fund of the Ministry of Education of China(6141A02033310)
文摘Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster is important for both cluster sensing capabilities and its autonomous operating. However, the existing time synchronization methods are not suitable for microsatellite cluster, because it requires too many human interventions and occupies too much ground control resource. Although, data post-process may realize the equivalent time synchronization, it requires processing time and powerful computing ability on the ground, which cannot be implemented by cluster itself. In order to autonomously establish and maintain the time benchmark in a cluster, we propose a compact time difference compensation system（TDCS）, which is a kind of time control loop that dynamically adjusts the satellite reference frequency according to the time difference. Consequently, the time synchronization in the cluster can be autonomously achieved on-orbit by synchronizing the clock of other satellites to a chosen one＇s. The experimental result shows that the standard deviation of time synchronization is about 102 ps when the carrier to noise ratio（CNR） is 95 d BHz, and the standard deviation of corresponding frequency difference is approximately0.36 Hz.
文摘Energy efficiency has become one of the top design criteria for current computing systems. The Dynamic Voltage and Frequency Scaling （DVFS） has been widely adopted by laptop computers, servers, and mobile devices to conserve energy, while the GPU DVFS is still at a certain early age. This paper aims at exploring the impact of GPU DVFS on the application performance and power consumption, and furthermore, on energy conservation. We survey the state-of-the-art GPU DVFS characterizations, and then summarize recent research works on GPU power and performance models. We also conduct real GPU DVFS experiments on NVIDIA Fermi and Maxwell GPUs. According to our experimental results, GPU DVFS has significant potential for energy saving. The effect of scaling core voltage/frequency and memory voltage/frequency depends on not only the GPLI architectures, but also the characteristic of GPU applications.
文摘Recently,Multicore systems use Dynamic Voltage/Frequency Scaling(DV/FS)technology to allow the cores to operate with various voltage and/or frequencies than other cores to save power and enhance the performance.In this paper,an effective and reliable hybridmodel to reduce the energy and makespan in multicore systems is proposed.The proposed hybrid model enhances and integrates the greedy approach with dynamic programming to achieve optimal Voltage/Frequency(Vmin/F)levels.Then,the allocation process is applied based on the availableworkloads.The hybrid model consists of three stages.The first stage gets the optimum safe voltage while the second stage sets the level of energy efficiency,and finally,the third is the allocation stage.Experimental results on various benchmarks show that the proposed model can generate optimal solutions to save energy while minimizing the makespan penalty.Comparisons with other competitive algorithms show that the proposed model provides on average 48%improvements in energy-saving and achieves an 18%reduction in computation time while ensuring a high degree of system reliability.
文摘We developed a modified stochastic finite-fault method for estimating strong ground motions.An adjustment to the dynamic corner frequency was introduced,which accounted for the effect of the location of the subfault relative to the hypocenter and rupture propagation direction,to account for the influence of the rupture propagation direction on the subfault dynamic corner frequency.By comparing the peak ground acceleration(PGA),pseudo-absolute response spectra acceleration(PSA,damping ratio of 5%),and duration,the results of the modified and existing methods were compared,demonstrating that our proposed adjustment to the dynamic corner frequency can accurately reflect the rupture directivity effect.We applied our modified method to simulate near-field strong motions within 150 km of the 2008 MW7.9 Wenchuan earthquake rupture.Our modified method performed well over a broad period range,particularly at 0.04-4 s.The total deviations of the stochastic finite-fault method(EXSIM)and the modified EXSIM were 0.1676 and 0.1494,respectively.The modified method can effectively account for the influence of the rupture propagation direction and provide more realistic ground motion estimations for earthquake disaster mitigation.
文摘The study is carried out in imperfect contact with a concrete slab wall attached to a panel based on rice straw compressed in a dynamic frequency regime. We will propose the characterization of thermal insulation for thermal resistance of contact (<i><span style="font-family:Verdana;">x</span></i><span style="font-family:Verdana;"> = 0.05 m). The impact of heat exchange coefficients on the front face (</span><i><span style="font-family:Verdana;">x</span></i><span style="font-family:Verdana;"> = 0 m) and the rear face (</span><i><span style="font-family:Verdana;">x</span></i><span style="font-family:Verdana;"> = 0.1 m) on these resistors is shown.</span>
