To tackle the issue of notch frequency and center frequency drift of the L(0,1)mode guided wave in ultra⁃sonic guided wave⁃based stress monitoring of prestressed steel strands,a method using higher⁃order mode plateau ...To tackle the issue of notch frequency and center frequency drift of the L(0,1)mode guided wave in ultra⁃sonic guided wave⁃based stress monitoring of prestressed steel strands,a method using higher⁃order mode plateau fre⁃quencies is adopted.First,the correlation between group velocity peaks and phase velocities at these plateau frequen⁃cies is analyzed.This analysis establishes a quantitative rela⁃tionship between phase velocity and stress in the steel strand,providing a theoretical foundation for stress monitor⁃ing.Then the two⁃dimensional Fourier transform is em⁃ployed to separate wave modes.Dynamic programming techniques are applied in the frequency⁃velocity domain to extract higher⁃order modes.By identifying the group veloc⁃ity peaks of these separated higher⁃order modes,the plateau frequencies of guided waves are determined,enabling indi⁃rect measurement of stress in the steel strand.To validate this method,finite element simulations are conducted under three scenarios.Results show that the higher⁃order modes of transient signals from three different positions can be ac⁃curately extracted,leading to successful cable stress moni⁃toring.This approach effectively circumvents the issue of guided wave frequency drift and improves stress monitoring accuracy.Consequently,it significantly improves the appli⁃cation of ultrasonic guided wave technology in structural health monitoring.展开更多
By adjusting the polarisation state of the pump at 805 nm parallel to slow （x） and fast （y） axes of the highly birefringent photonic crystal fibre with zero dispersion wavelengths 790 nm and 750 nm, this paper dem...By adjusting the polarisation state of the pump at 805 nm parallel to slow （x） and fast （y） axes of the highly birefringent photonic crystal fibre with zero dispersion wavelengths 790 nm and 750 nm, this paper demonstrates the efficient polarisation-sensitive four wave mixing involved in pump, anti-Stokes and Stokes signals and soliton self- frequency shift effects induced by the phase-matching between red-shifted solitons and blue-shifted dispersive waves. If the reduction of coupling efficiency to the circular pump laser mode or other circular fibres due to asymmetry of the core is neglected, more than 98% of the total input power is kept in a single linear polarisation. Controlled dispersion characteristic of the doublet of fundamental guided-modes results in achieving light field strongly confined in principal axes of photonic crystal fibre, and enhancing the corresponding nonlinear-optical process through the remarkable nonlinear birefringence.展开更多
Ground roll waves interfere with seismic data. The suppression of ground roll waves based on the division of wavelet frequencies considers the low-frequency characteristics of ground roll waves. However, this method w...Ground roll waves interfere with seismic data. The suppression of ground roll waves based on the division of wavelet frequencies considers the low-frequency characteristics of ground roll waves. However, this method will not be effective when the ground roll wave and the effective signal have the same frequency bands because of overlapping. The radial trace transform （RTT） considers the apparent velocity difference between the effective signal and the ground roll wave to suppress the latter, but affects the low-frequency components of the former. This study proposes a ground roll wave suppression method by combining the wavelet frequency division and the RTT based on the difference between the ground roll wave velocity and the effective signal and their energy difference in the wavelet domain, thus making full use of the advantages of both methods. First, we decompose the seismic data into different frequency bands through wavelet transform. Second, the RTT and low-cut filtering are applied to the low-frequency band, where the ground roll waves are appearing. Third, we reconstruct the seismic record without ground roll waves by using the inverse RTT and the remaining frequency bands. The proposed method not only improves the ground roll wave suppression, but also protects the signal integrity. The numerical simulation and real seismic data processing results suggest that the proposed method has a strong ability to denoise while preserving the amplitude.展开更多
Although full waveform inversion in the frequency domain can overcome the local minima problem in the time direction, such problem still exists in the space direction because of the media subsurface complexity. Based ...Although full waveform inversion in the frequency domain can overcome the local minima problem in the time direction, such problem still exists in the space direction because of the media subsurface complexity. Based on the optimal steep descent methods, we present an algorithm which combines the preconditioned bi-conjugated gradient stable method and the multi-grid method to compute the wave propagation and the gradient space. The multiple scale prosperity of the waveform inversion and the multi-grid method can overcome the inverse problems local minima defect and accelerate convergence. The local inhomogeneous three-hole model simulated results and the Marmousi model certify the algorithm effectiveness.展开更多
As an important equipment for sea state remote sensing, high frequency surface wave radar （HFSWR） has received more and more attention. The conventional method for wave height inversion is based on the ratio of the ...As an important equipment for sea state remote sensing, high frequency surface wave radar （HFSWR） has received more and more attention. The conventional method for wave height inversion is based on the ratio of the integration of the second-order spectral continuum to that of the first-order region, where the strong external noise and the incorrect delineation of the first- and second-order Doppler spectral regions due to spectral aliasing are two major sources of errors in the wave height. To account for these factors, two more indices are introduced to the wave height estimation, i.e., the ratio of the maximum power of the second-or- der continuum to that of the Bragg spectral region （RSCB） and the ratio of the power of the second harmonic peak to that of the Bragg peak （RSHB）. Both indices also have a strong correlation with the underlying wave height. On the basis of all these indices an empirical model is proposed to estimate the wave height. This method has been used in a three-months long experiment of the ocean state measuring and analyzing ra- dar, type S （OSMAR-S）, which is a portable HFSWR with compact cross-loop/monopole receive antennas developed by Wuhan University since 2006. During the experiment in the Taiwan Strait, the significant wave height varied from 0 to 5 m. The significant wave heights estimated by the OSMAR-S correlate well with the data provided by the Oceanweather Inc. for comparison, with a correlation coefficient of 0.74 and a root mean square error （RMSE） of 0.77 m. The proposed method has made an effective improvement to the wave height estimation and thus a further step toward operational use of the OSMAR-S in the wave height extraction.展开更多
The lower frequency part of the theoretical wind wave spectrum proposed by the authors (Wen et al. , 1988a, b,c) has been improved and the form of spectrum is appreciably simplified. In addition to the field data coll...The lower frequency part of the theoretical wind wave spectrum proposed by the authors (Wen et al. , 1988a, b,c) has been improved and the form of spectrum is appreciably simplified. In addition to the field data collected in the Bohai Sea region and used in the previous papers, those obtained in the Huanghai Sea, the East China Sea and the South China Sea have been employed so that the improved spectra can be verified on a more extensive observational basis. Computed results agree with the observations well. Further comparisons have been made between the proposed spectra and the JONSWAP spectrum. Though the two types of spectrum are close to each other in form, the former shows, as a whole, better agreement with the observation than the latter. By introducing an improved relation between the peak-ness factor and significant wave steepness, the spectrum contains only significant wave height and period as parameters. For spectra given in this form, the computed peak frequencies coincide approximately with observed values and the computed peak magnitudes of spectra agree basically with observations, but, because of the statistic variability inherent in the measurements of significant wave heights and periods, there are certain discrepancies between computed and measured spectrum peak magnitudes.展开更多
In the present study, the surface elevation of wind waves observed in laboratory and in the Bohai Sea are adopted for the estimation of the wind wave frequency spectrtm by use of the method of the arcsine law （MAL）....In the present study, the surface elevation of wind waves observed in laboratory and in the Bohai Sea are adopted for the estimation of the wind wave frequency spectrtm by use of the method of the arcsine law （MAL）. The traditional method uses the surface elevation to calculate the correlation and then estimate the frequency spectrum while the MAL, presented by Yu and l.an （1979）, uses the time sequence of zero-crossing points of surface elevation rather than directly the surface elevation to calculate the correlation. 66 sets of wind wave data obtained in laboratory and 420 sets of data observed in the Bohai Sea are adopted for the examination of the method introduced by Yu and Lan. Results show that the MAL can give reliable estimation of wind wave spectra. Correlation and form of spectra estimated by the MAL are similar to those estimated by the traditional method. The peak frequency and the spectral density in peak frequency by the MAL are close to those obtained by the traditional method.展开更多
By use of the filter analysis technique, the Complex Empirical Othogonal Function (CEOF) method and the ECMWF/WMO 2.5°×2.5°grid data of the geopotential heights during the summer months in 1988, an inte...By use of the filter analysis technique, the Complex Empirical Othogonal Function (CEOF) method and the ECMWF/WMO 2.5°×2.5°grid data of the geopotential heights during the summer months in 1988, an interseasonal process that the western Pacific subtropical high (WPSH) was anomalously far to the north in the first and second ten days of July is studied. It has been found that in the western Pacific subtropical region in the first and second ten days of July,it is the continuous assembly of low frequency geopotential waves (LFGWs) that leads to the abnormality of WPSH. This abnormality emerges with the enhancement of wave assembling and ceases while the wave assembling situation disappears. The structure of the low frequency assembling waves corresponds to the structure of subtropical high in its abnormal period. The effect of the assembling waves on the abnormality of subtropical high can be considered as the accumulation of disturbance energy carried by the low frequency waves from different directions in the western Pacific region.展开更多
Combining suitable microstructure and dielectric-magnetic synergy effect is conducive to achieve lightweight,broadband,and high-efficiency microwave absorbing materials within low filler loading.Herein,porous carbon p...Combining suitable microstructure and dielectric-magnetic synergy effect is conducive to achieve lightweight,broadband,and high-efficiency microwave absorbing materials within low filler loading.Herein,porous carbon polyhedrons coupled with bimetallic CoNi alloys were synthesized by using metalorganic frameworks(MOFs)as a template and subsequent pyrolysis treatment.Electromagnetic analysis indicated that the existence of metal Ni element could influence the wave attenuation capacity effectively,resulting in frequency selective wave absorption performance.Additionally,the pyrolysis temperature was also closely related to wave absorption intensity.The Co_(2)Ni_(1)/C/PVDF composites calcined at 800℃ possessed outstanding wave absorption performance at an ultra-low filler loading of 5 wt%.The minimum reflection loss value achieved-52 dB(10.8 GHz)under the matched thickness of 3 mm.Moreover,the broadest effective absorption bandwidth(RL<-10 dB)reached 6.2 dB(11.8-18 GHz)for Co/C-800/PVDF composites when the thickness turned into 2 mm.The remarkable wave attenuation ability was mainly ascribed to magnetic and dielectric loss,impedance matching as well as porous structure effect.展开更多
This study examined wintertime (November-April) cold wave frequency (CWF) in northern China during the last 42 years and its association with Arctic Oscillation (AO) through analysis of daily mean surface temperature ...This study examined wintertime (November-April) cold wave frequency (CWF) in northern China during the last 42 years and its association with Arctic Oscillation (AO) through analysis of daily mean surface temperature from 280 stations across northern China and European Centre for Medium-Range Weather Forecasts (ECMWF) 40-Year Re-analysis ERA-40 data. The leading empirical orthogonal function EOF mode of wintertime CWF (CWF-EOF1) indicates an identical signal over most northern China, with the characteristic trend of linear decline for the leading principal component (CWF-PC1). After the linear trend is removed, remarkable inter-annual variability is found to be the dominant feature of the CWF-PC1. The regression map for sea level pressure based on CWF-PC1 corresponds to the negative phase of AO. Correlation analysis further proves that CWF-PC1 has a significant negative correlation with AO at the inter-annual time scale. The relationship between AO and global surface air temperature is also investigated in order to understand its association with cold air activity over East Asia, and it is suggested that the anomalies of atmospheric circulation in Siberia may serve as a bridge for interaction between AO and CWF in northern China during wintertime.展开更多
A layout and connection optimization for static frequency divider is presented. The layout optimization provides a new circle topology transistors placement and reasonable connection structure, which reduces the paras...A layout and connection optimization for static frequency divider is presented. The layout optimization provides a new circle topology transistors placement and reasonable connection structure, which reduces the parasitic effectively and enables self-oscillation frequency enhancement. Besides, bandwidth enhancement techniques based on a center-tap capacitor in input balun design and inductive peaking in latch design are adopted to improve further high frequency performance with low power consumption. As a proof of concept, design of a divide-by-2 static frequency divider in 0.13 μm SiGe BiCMOS technology is reported. With single-ended input clock signal, the divider is measured to be operated from 40 to 90 GHz. Phase noise measurements of a 90 GHz input clock signal indicate ideal behavior with no measurable noise contribution from the divider. The divider followed by a buffer that can deliver more than-10 dBm output power, which is sufficient to drive succeeding stage. To the author's knowledge, the divider exhibits a competitive power dissipation and the highest FOM among silicon based frequency dividers that operating higher than 70 GHz.展开更多
Based on the quasi-harmonic analysis of 11 d vector ocean currents obtained from two high frequency sur- face wave radars located at Zhujiajian Island and Shengshan Island, the spatial distribution characteristics of ...Based on the quasi-harmonic analysis of 11 d vector ocean currents obtained from two high frequency sur- face wave radars located at Zhujiajian Island and Shengshan Island, the spatial distribution characteristics of surface tidal currents in the open sea area to the east of the Zhoushan Islands of Zhejiang Province, China are studied. The following conclusions are drawn from the analysis： the tidal current pattern in the open sea area to the east of Zhoushan Islands is primarily regular semidiurnal, which is significantly affected by the shallow water constituents. The directions of the major axes of tidal current ellipses of M2 lie approx- imately in the NW-SE direction. With the increasing of distance away from the coast, the directions of the tidal current ellipses gradually shift toward the E-W direction. The tidal currents are mainly reversing cur- rents. The spatial distribution of probable maximum current velocities decreases gradually from northeast to southwest which is basically in accordance with the spatial distribution of measured maximum current velocities. The residual currents near the coast are larger than those far away from the coast. The directions of the residual currents are basically north by east, and the angle to the due north increases gradually with the increasing distance away from the coast. The topography shows a certain impact on the spatial distri- bution of shallow water constituents, the rotation of tidal currents, the probable maximum currents and the residual currents.展开更多
An equivalent-circuit model is used to analyse the improvement of the wave absorbing performance of the lossy frequency selective surface（FSS） absorber by using a magnetic substrate,showing that it is possible to wi...An equivalent-circuit model is used to analyse the improvement of the wave absorbing performance of the lossy frequency selective surface（FSS） absorber by using a magnetic substrate,showing that it is possible to widen the wave absorbing bandwidth.Three pieces of magnetic substrates are prepared.According to the complex permittivity and permeability,the reflectivity of the corresponding absorber is calculated by the finite difference time-domain（FDTD） method,and the bandwidth of the reflectivity below 10 dB is optimized by genetic algorithm.The calculated results indicate that the wave absorbing performance is significantly improved by increasing the complex permeability of the substrate;the reflectivity bandwidth below 10 dB of the single layer FSS absorber can reach 3.6-18 GHz with a thickness of 5 mm,which is wider than that with a dielectric substrate.The density of the FSS absorber is only 0.92 g/cm 3.Additionally,the absorption band can be further widened by inserting a second lossy FSS.Finally,a double layer lossy FSS absorber with a magnetic substrate is fabricated based on the design result.The experimental result is consistent with the design one.展开更多
The growth of frequency spectra and spectral parameters of wind waves generated by cold waves, a kind of severe weather system, in the northern East China Sea is studied in this paper. Based on a third-generation wave...The growth of frequency spectra and spectral parameters of wind waves generated by cold waves, a kind of severe weather system, in the northern East China Sea is studied in this paper. Based on a third-generation wave action model(the Simulating WAves Nearshore model), simulations were developed to analyze the spatiotemporal characteristics of wind waves and to output spectral data. It is shown that the cold wave-induced spectra can be well described by the modified Joint North Sea Wave Project spectral form. The growth of wave spectra is comprehensively reflected by the evolution of the three characteristic parameters: peak frequency, spectral peak and wave energy. Besides, the approximations of dependences between spectral parameters and the three types of universal induced factors are obtained with the least squares method and compared systematically. Fetch and peak frequency turn out to be suitable parameters to describe the spectral parameters, while the dependences on the inverse wave age vary in different sea areas. In general, the derived relationships improve on results from previous studies for better practical application of the wind wave frequency spectrum in the northern East China Sea.展开更多
Green＇s functions for Blot＇s dynamic equation in the frequency domain can be a highly useful tool for the investigation of dynamic responses of a saturated porous medium. Its applications are found in soil dynamics,...Green＇s functions for Blot＇s dynamic equation in the frequency domain can be a highly useful tool for the investigation of dynamic responses of a saturated porous medium. Its applications are found in soil dynamics, seismology, earthquake engineering, rock mechanics, geophysics, and acoustics. However, the mathematical work for deriving it can be daunting. Green＇s functions have been presented utilizing an analogy between the dynamic thermoelasticity and the dynamic poroelasticity in the frequency domain using the u-p formulation. In this work, a special term ＂decoupling coefficient＂ for the decomposition of the fast and slow dilatational waves is proposed and expressed to present a new methodology for deriving the poroelastodynamic Green＇s functions. The correct- ness of the solution is demonstrated by numerically comparing the current solution with Cheng＇s previous solution. The separation of the two waves in the present methodology allows the more accurate evaluation of Green＇s functions, particularly the solution of the slow dilatational wave. This can be advantageous for the numerical implementation of the boundary element method （BEM） and other applications.展开更多
The spectrum variance m0, peak frequency ω0 and peakness factor p are expressed in terms of nondimensional fetch and duration by making use of relations which are derived through comparing and analyzing existing empi...The spectrum variance m0, peak frequency ω0 and peakness factor p are expressed in terms of nondimensional fetch and duration by making use of relations which are derived through comparing and analyzing existing empirical formulas for the growth of significant wave height and period. The main features of spectrum growth as specified by these parameters agree with those of the JONS-WAP experiments. For given wind speed and fetch, the high frequency parts beyond the peaks of shallow water spectra almost coincide with that of the corresponding deep water spectrum, whereas the low frequency parts differ appreciably. The method developed in this paper predicts smaller significant wave height as well as smaller wave period for shallow water spectra in contrast to the theoretical result of Kitaigorodskii ef al, in which the peak frequency, and consequently the significant wave period, remains basically unchanged for different water depths. Spectra are further reduced to a form in which only significant wave height and period are left as parameters, the peakness factor being replaced by the wave steepness through an empirical relation between them. Spectra in this form have been verified by observations.展开更多
Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing perform...Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.展开更多
We demonstrated a continuous wave(cw) single-frequency intracavity frequency-doubled Nd:YVO_4/LBO laser with 532 nm output of 7.5 W and 1.06 μm output of 3.1 W, and low intensity noise in audio frequency region.To su...We demonstrated a continuous wave(cw) single-frequency intracavity frequency-doubled Nd:YVO_4/LBO laser with 532 nm output of 7.5 W and 1.06 μm output of 3.1 W, and low intensity noise in audio frequency region.To suppress the intensity noise of the high power 532 nm laser, a laser frequency locking system and a feedback loop based on a Mach-Zehnder interferometer were designed and used.The influences of the frequency stabilization and the crucial parameters of the MZI, such as the power splitting ratio of the beam splitters and the locking state of the MZI, on the intensity noise of the 532 nm laser were investigated in detail.After the experimental optimizations, the laser intensity noise in the frequency region from 0.4 kHz to 10 kHz was significantly suppressed.展开更多
-Theoretical form of equilibrium range is given on the basis of the wind wave frequency spectra proposed by Wenel al. (1988a,b,c, 1989a,b). The effects of peakness factor and water depth are discussed. In the case of ...-Theoretical form of equilibrium range is given on the basis of the wind wave frequency spectra proposed by Wenel al. (1988a,b,c, 1989a,b). The effects of peakness factor and water depth are discussed. In the case of deep water the e-quilibrium range is reduced to the form first proposed by Toba (1973) and the coefficient of the formula is shown to be the function of nondimensional fetch or peak frequency. Results of the present paper have been verified through field data.展开更多
Observational data such as those obtained from the magnetosheath in the downstream of Earth＇s bow shock have waveforms that differ from those of sinusoidal signals. In practice, they are not even aggregates of sinuso...Observational data such as those obtained from the magnetosheath in the downstream of Earth＇s bow shock have waveforms that differ from those of sinusoidal signals. In practice, they are not even aggregates of sinusoidal signals. Therefore, the frequency decomposition for the data requires technique that will account for the time-varying features of the data that will lead to deduction of physical meaning of the observations. The combination of empirical mode decompo- sition （EMD） and Hilbert transform has been used for extracting the various contributing oscillatory modes （EMDs） and the instantaneous frequency determination （Hilbert transform） of every physically meaningful mode called intrinsic mode func- tion （IMF）. The resulting instantaneous frequencies are used to determine instantaneous wave vectors. The combination of the instantaneous frequencies and wave vectors is useful in the identification of wave modes based on the characteristics of the waves. The results show that EMD-Hilbert can be more reliable than simple Hilbert transform alone.展开更多
基金The National Natural Science Foundation of China(No.52278303).
文摘To tackle the issue of notch frequency and center frequency drift of the L(0,1)mode guided wave in ultra⁃sonic guided wave⁃based stress monitoring of prestressed steel strands,a method using higher⁃order mode plateau fre⁃quencies is adopted.First,the correlation between group velocity peaks and phase velocities at these plateau frequen⁃cies is analyzed.This analysis establishes a quantitative rela⁃tionship between phase velocity and stress in the steel strand,providing a theoretical foundation for stress monitor⁃ing.Then the two⁃dimensional Fourier transform is em⁃ployed to separate wave modes.Dynamic programming techniques are applied in the frequency⁃velocity domain to extract higher⁃order modes.By identifying the group veloc⁃ity peaks of these separated higher⁃order modes,the plateau frequencies of guided waves are determined,enabling indi⁃rect measurement of stress in the steel strand.To validate this method,finite element simulations are conducted under three scenarios.Results show that the higher⁃order modes of transient signals from three different positions can be ac⁃curately extracted,leading to successful cable stress moni⁃toring.This approach effectively circumvents the issue of guided wave frequency drift and improves stress monitoring accuracy.Consequently,it significantly improves the appli⁃cation of ultrasonic guided wave technology in structural health monitoring.
基金partly supported by the National Basic Research Program (Grant Nos. 2010CB327605 and 2010CB328300)Nationa lHigh-Technology Research and Development Program of China (Grant Nos. 2007AA03Z447 and 2009AA01Z220)+2 种基金the National Natural Science Foundation of China (Grant No. 60807022)the Key Grant of Ministry of Education of China (Grant No. 109015)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20070013001)
文摘By adjusting the polarisation state of the pump at 805 nm parallel to slow （x） and fast （y） axes of the highly birefringent photonic crystal fibre with zero dispersion wavelengths 790 nm and 750 nm, this paper demonstrates the efficient polarisation-sensitive four wave mixing involved in pump, anti-Stokes and Stokes signals and soliton self- frequency shift effects induced by the phase-matching between red-shifted solitons and blue-shifted dispersive waves. If the reduction of coupling efficiency to the circular pump laser mode or other circular fibres due to asymmetry of the core is neglected, more than 98% of the total input power is kept in a single linear polarisation. Controlled dispersion characteristic of the doublet of fundamental guided-modes results in achieving light field strongly confined in principal axes of photonic crystal fibre, and enhancing the corresponding nonlinear-optical process through the remarkable nonlinear birefringence.
基金supported by the National Science and Technology Major Project(No.2011ZX05007-006)the 973 Program of China(No.2013CB228604)the major Project of Petrochina(No.2014B-0610)
文摘Ground roll waves interfere with seismic data. The suppression of ground roll waves based on the division of wavelet frequencies considers the low-frequency characteristics of ground roll waves. However, this method will not be effective when the ground roll wave and the effective signal have the same frequency bands because of overlapping. The radial trace transform （RTT） considers the apparent velocity difference between the effective signal and the ground roll wave to suppress the latter, but affects the low-frequency components of the former. This study proposes a ground roll wave suppression method by combining the wavelet frequency division and the RTT based on the difference between the ground roll wave velocity and the effective signal and their energy difference in the wavelet domain, thus making full use of the advantages of both methods. First, we decompose the seismic data into different frequency bands through wavelet transform. Second, the RTT and low-cut filtering are applied to the low-frequency band, where the ground roll waves are appearing. Third, we reconstruct the seismic record without ground roll waves by using the inverse RTT and the remaining frequency bands. The proposed method not only improves the ground roll wave suppression, but also protects the signal integrity. The numerical simulation and real seismic data processing results suggest that the proposed method has a strong ability to denoise while preserving the amplitude.
基金supported by the China State Key Science and Technology Project on Marine Carbonate Reservoir Characterization (No. 2011ZX05004-003)the Basic Research Programs of CNPC during the 12th Five-Year Plan Period (NO.2011A-3603)+1 种基金the Natural Science Foundation of China (No.41104066)the RIPED Young Professional Innovation Fund (NO.2010-13-16-02, 2010-A-26-02)
文摘Although full waveform inversion in the frequency domain can overcome the local minima problem in the time direction, such problem still exists in the space direction because of the media subsurface complexity. Based on the optimal steep descent methods, we present an algorithm which combines the preconditioned bi-conjugated gradient stable method and the multi-grid method to compute the wave propagation and the gradient space. The multiple scale prosperity of the waveform inversion and the multi-grid method can overcome the inverse problems local minima defect and accelerate convergence. The local inhomogeneous three-hole model simulated results and the Marmousi model certify the algorithm effectiveness.
基金The National Natural Science Foundation of China under contract No.61371198the National Special Program for Key Scientific Instrument and Equipment Development of China under contract No.2013YQ160793the Natural Science Foundation of Jiangsu Province of China under contract No.BK2012199
文摘As an important equipment for sea state remote sensing, high frequency surface wave radar （HFSWR） has received more and more attention. The conventional method for wave height inversion is based on the ratio of the integration of the second-order spectral continuum to that of the first-order region, where the strong external noise and the incorrect delineation of the first- and second-order Doppler spectral regions due to spectral aliasing are two major sources of errors in the wave height. To account for these factors, two more indices are introduced to the wave height estimation, i.e., the ratio of the maximum power of the second-or- der continuum to that of the Bragg spectral region （RSCB） and the ratio of the power of the second harmonic peak to that of the Bragg peak （RSHB）. Both indices also have a strong correlation with the underlying wave height. On the basis of all these indices an empirical model is proposed to estimate the wave height. This method has been used in a three-months long experiment of the ocean state measuring and analyzing ra- dar, type S （OSMAR-S）, which is a portable HFSWR with compact cross-loop/monopole receive antennas developed by Wuhan University since 2006. During the experiment in the Taiwan Strait, the significant wave height varied from 0 to 5 m. The significant wave heights estimated by the OSMAR-S correlate well with the data provided by the Oceanweather Inc. for comparison, with a correlation coefficient of 0.74 and a root mean square error （RMSE） of 0.77 m. The proposed method has made an effective improvement to the wave height estimation and thus a further step toward operational use of the OSMAR-S in the wave height extraction.
文摘The lower frequency part of the theoretical wind wave spectrum proposed by the authors (Wen et al. , 1988a, b,c) has been improved and the form of spectrum is appreciably simplified. In addition to the field data collected in the Bohai Sea region and used in the previous papers, those obtained in the Huanghai Sea, the East China Sea and the South China Sea have been employed so that the improved spectra can be verified on a more extensive observational basis. Computed results agree with the observations well. Further comparisons have been made between the proposed spectra and the JONSWAP spectrum. Though the two types of spectrum are close to each other in form, the former shows, as a whole, better agreement with the observation than the latter. By introducing an improved relation between the peak-ness factor and significant wave steepness, the spectrum contains only significant wave height and period as parameters. For spectra given in this form, the computed peak frequencies coincide approximately with observed values and the computed peak magnitudes of spectra agree basically with observations, but, because of the statistic variability inherent in the measurements of significant wave heights and periods, there are certain discrepancies between computed and measured spectrum peak magnitudes.
基金This project was financially supported by the National Natural Science Foundation of China(Grant No.40406008) the Foundation for Open Projects of the Key Laboratory of Physical Oceanography,Ministry of Education,China(Grant No.200309)
文摘In the present study, the surface elevation of wind waves observed in laboratory and in the Bohai Sea are adopted for the estimation of the wind wave frequency spectrtm by use of the method of the arcsine law （MAL）. The traditional method uses the surface elevation to calculate the correlation and then estimate the frequency spectrum while the MAL, presented by Yu and l.an （1979）, uses the time sequence of zero-crossing points of surface elevation rather than directly the surface elevation to calculate the correlation. 66 sets of wind wave data obtained in laboratory and 420 sets of data observed in the Bohai Sea are adopted for the examination of the method introduced by Yu and Lan. Results show that the MAL can give reliable estimation of wind wave spectra. Correlation and form of spectra estimated by the MAL are similar to those estimated by the traditional method. The peak frequency and the spectral density in peak frequency by the MAL are close to those obtained by the traditional method.
文摘By use of the filter analysis technique, the Complex Empirical Othogonal Function (CEOF) method and the ECMWF/WMO 2.5°×2.5°grid data of the geopotential heights during the summer months in 1988, an interseasonal process that the western Pacific subtropical high (WPSH) was anomalously far to the north in the first and second ten days of July is studied. It has been found that in the western Pacific subtropical region in the first and second ten days of July,it is the continuous assembly of low frequency geopotential waves (LFGWs) that leads to the abnormality of WPSH. This abnormality emerges with the enhancement of wave assembling and ceases while the wave assembling situation disappears. The structure of the low frequency assembling waves corresponds to the structure of subtropical high in its abnormal period. The effect of the assembling waves on the abnormality of subtropical high can be considered as the accumulation of disturbance energy carried by the low frequency waves from different directions in the western Pacific region.
基金supported by the National Natural Science Foundation of China(No.52073010)Beijing Natural Science Foundation(2214069)。
文摘Combining suitable microstructure and dielectric-magnetic synergy effect is conducive to achieve lightweight,broadband,and high-efficiency microwave absorbing materials within low filler loading.Herein,porous carbon polyhedrons coupled with bimetallic CoNi alloys were synthesized by using metalorganic frameworks(MOFs)as a template and subsequent pyrolysis treatment.Electromagnetic analysis indicated that the existence of metal Ni element could influence the wave attenuation capacity effectively,resulting in frequency selective wave absorption performance.Additionally,the pyrolysis temperature was also closely related to wave absorption intensity.The Co_(2)Ni_(1)/C/PVDF composites calcined at 800℃ possessed outstanding wave absorption performance at an ultra-low filler loading of 5 wt%.The minimum reflection loss value achieved-52 dB(10.8 GHz)under the matched thickness of 3 mm.Moreover,the broadest effective absorption bandwidth(RL<-10 dB)reached 6.2 dB(11.8-18 GHz)for Co/C-800/PVDF composites when the thickness turned into 2 mm.The remarkable wave attenuation ability was mainly ascribed to magnetic and dielectric loss,impedance matching as well as porous structure effect.
基金supported by the National Basic Research Program of China (973 Program) (Grant No.2009CB421406)the National Key Technologies R&D Program of China (Grant No.2007BAC29B03)the The National Natural Science Foundation of China Project (Grant No.40821092)
文摘This study examined wintertime (November-April) cold wave frequency (CWF) in northern China during the last 42 years and its association with Arctic Oscillation (AO) through analysis of daily mean surface temperature from 280 stations across northern China and European Centre for Medium-Range Weather Forecasts (ECMWF) 40-Year Re-analysis ERA-40 data. The leading empirical orthogonal function EOF mode of wintertime CWF (CWF-EOF1) indicates an identical signal over most northern China, with the characteristic trend of linear decline for the leading principal component (CWF-PC1). After the linear trend is removed, remarkable inter-annual variability is found to be the dominant feature of the CWF-PC1. The regression map for sea level pressure based on CWF-PC1 corresponds to the negative phase of AO. Correlation analysis further proves that CWF-PC1 has a significant negative correlation with AO at the inter-annual time scale. The relationship between AO and global surface air temperature is also investigated in order to understand its association with cold air activity over East Asia, and it is suggested that the anomalies of atmospheric circulation in Siberia may serve as a bridge for interaction between AO and CWF in northern China during wintertime.
基金supported by National Natural Science Foundation of China under Grant 61701114the National Science and Technology Major Project under Grant 2017ZX03001020the Scientific Research Foundation of Graduate School of Southeast University (Grant No. YBJJ1811)
文摘A layout and connection optimization for static frequency divider is presented. The layout optimization provides a new circle topology transistors placement and reasonable connection structure, which reduces the parasitic effectively and enables self-oscillation frequency enhancement. Besides, bandwidth enhancement techniques based on a center-tap capacitor in input balun design and inductive peaking in latch design are adopted to improve further high frequency performance with low power consumption. As a proof of concept, design of a divide-by-2 static frequency divider in 0.13 μm SiGe BiCMOS technology is reported. With single-ended input clock signal, the divider is measured to be operated from 40 to 90 GHz. Phase noise measurements of a 90 GHz input clock signal indicate ideal behavior with no measurable noise contribution from the divider. The divider followed by a buffer that can deliver more than-10 dBm output power, which is sufficient to drive succeeding stage. To the author's knowledge, the divider exhibits a competitive power dissipation and the highest FOM among silicon based frequency dividers that operating higher than 70 GHz.
基金The National High Technology Research and Development Program of China(863 Program)under contract No.2012AA091701the Fundamental Research Fund for the Central Universities of China under contract No.2012212020211
文摘Based on the quasi-harmonic analysis of 11 d vector ocean currents obtained from two high frequency sur- face wave radars located at Zhujiajian Island and Shengshan Island, the spatial distribution characteristics of surface tidal currents in the open sea area to the east of the Zhoushan Islands of Zhejiang Province, China are studied. The following conclusions are drawn from the analysis： the tidal current pattern in the open sea area to the east of Zhoushan Islands is primarily regular semidiurnal, which is significantly affected by the shallow water constituents. The directions of the major axes of tidal current ellipses of M2 lie approx- imately in the NW-SE direction. With the increasing of distance away from the coast, the directions of the tidal current ellipses gradually shift toward the E-W direction. The tidal currents are mainly reversing cur- rents. The spatial distribution of probable maximum current velocities decreases gradually from northeast to southwest which is basically in accordance with the spatial distribution of measured maximum current velocities. The residual currents near the coast are larger than those far away from the coast. The directions of the residual currents are basically north by east, and the angle to the due north increases gradually with the increasing distance away from the coast. The topography shows a certain impact on the spatial distri- bution of shallow water constituents, the rotation of tidal currents, the probable maximum currents and the residual currents.
文摘An equivalent-circuit model is used to analyse the improvement of the wave absorbing performance of the lossy frequency selective surface（FSS） absorber by using a magnetic substrate,showing that it is possible to widen the wave absorbing bandwidth.Three pieces of magnetic substrates are prepared.According to the complex permittivity and permeability,the reflectivity of the corresponding absorber is calculated by the finite difference time-domain（FDTD） method,and the bandwidth of the reflectivity below 10 dB is optimized by genetic algorithm.The calculated results indicate that the wave absorbing performance is significantly improved by increasing the complex permeability of the substrate;the reflectivity bandwidth below 10 dB of the single layer FSS absorber can reach 3.6-18 GHz with a thickness of 5 mm,which is wider than that with a dielectric substrate.The density of the FSS absorber is only 0.92 g/cm 3.Additionally,the absorption band can be further widened by inserting a second lossy FSS.Finally,a double layer lossy FSS absorber with a magnetic substrate is fabricated based on the design result.The experimental result is consistent with the design one.
基金Supported by the National Key Research and Development Program of China(No.2016YFC1402000)the National Natural Science Foundation of China(Nos.41376027,41406017,U1406401,41421005)
文摘The growth of frequency spectra and spectral parameters of wind waves generated by cold waves, a kind of severe weather system, in the northern East China Sea is studied in this paper. Based on a third-generation wave action model(the Simulating WAves Nearshore model), simulations were developed to analyze the spatiotemporal characteristics of wind waves and to output spectral data. It is shown that the cold wave-induced spectra can be well described by the modified Joint North Sea Wave Project spectral form. The growth of wave spectra is comprehensively reflected by the evolution of the three characteristic parameters: peak frequency, spectral peak and wave energy. Besides, the approximations of dependences between spectral parameters and the three types of universal induced factors are obtained with the least squares method and compared systematically. Fetch and peak frequency turn out to be suitable parameters to describe the spectral parameters, while the dependences on the inverse wave age vary in different sea areas. In general, the derived relationships improve on results from previous studies for better practical application of the wind wave frequency spectrum in the northern East China Sea.
基金Project supported by the National Natural Science Foundation of China(Nos.51478435,11402150,and 11172268)
文摘Green＇s functions for Blot＇s dynamic equation in the frequency domain can be a highly useful tool for the investigation of dynamic responses of a saturated porous medium. Its applications are found in soil dynamics, seismology, earthquake engineering, rock mechanics, geophysics, and acoustics. However, the mathematical work for deriving it can be daunting. Green＇s functions have been presented utilizing an analogy between the dynamic thermoelasticity and the dynamic poroelasticity in the frequency domain using the u-p formulation. In this work, a special term ＂decoupling coefficient＂ for the decomposition of the fast and slow dilatational waves is proposed and expressed to present a new methodology for deriving the poroelastodynamic Green＇s functions. The correct- ness of the solution is demonstrated by numerically comparing the current solution with Cheng＇s previous solution. The separation of the two waves in the present methodology allows the more accurate evaluation of Green＇s functions, particularly the solution of the slow dilatational wave. This can be advantageous for the numerical implementation of the boundary element method （BEM） and other applications.
文摘The spectrum variance m0, peak frequency ω0 and peakness factor p are expressed in terms of nondimensional fetch and duration by making use of relations which are derived through comparing and analyzing existing empirical formulas for the growth of significant wave height and period. The main features of spectrum growth as specified by these parameters agree with those of the JONS-WAP experiments. For given wind speed and fetch, the high frequency parts beyond the peaks of shallow water spectra almost coincide with that of the corresponding deep water spectrum, whereas the low frequency parts differ appreciably. The method developed in this paper predicts smaller significant wave height as well as smaller wave period for shallow water spectra in contrast to the theoretical result of Kitaigorodskii ef al, in which the peak frequency, and consequently the significant wave period, remains basically unchanged for different water depths. Spectra are further reduced to a form in which only significant wave height and period are left as parameters, the peakness factor being replaced by the wave steepness through an empirical relation between them. Spectra in this form have been verified by observations.
基金supported by National Natural Science Foundation of China(No.52103361)Shaanxi University Youth Outstanding Talents Support Plan,Scientific and Technological Plan Project of Xi’an Beilin District(No.GX2143)。
文摘Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.
基金Project supported by the National Key R&D Program of China(Grant No.2016YFA0301401)
文摘We demonstrated a continuous wave(cw) single-frequency intracavity frequency-doubled Nd:YVO_4/LBO laser with 532 nm output of 7.5 W and 1.06 μm output of 3.1 W, and low intensity noise in audio frequency region.To suppress the intensity noise of the high power 532 nm laser, a laser frequency locking system and a feedback loop based on a Mach-Zehnder interferometer were designed and used.The influences of the frequency stabilization and the crucial parameters of the MZI, such as the power splitting ratio of the beam splitters and the locking state of the MZI, on the intensity noise of the 532 nm laser were investigated in detail.After the experimental optimizations, the laser intensity noise in the frequency region from 0.4 kHz to 10 kHz was significantly suppressed.
文摘-Theoretical form of equilibrium range is given on the basis of the wind wave frequency spectra proposed by Wenel al. (1988a,b,c, 1989a,b). The effects of peakness factor and water depth are discussed. In the case of deep water the e-quilibrium range is reduced to the form first proposed by Toba (1973) and the coefficient of the formula is shown to be the function of nondimensional fetch or peak frequency. Results of the present paper have been verified through field data.
文摘Observational data such as those obtained from the magnetosheath in the downstream of Earth＇s bow shock have waveforms that differ from those of sinusoidal signals. In practice, they are not even aggregates of sinusoidal signals. Therefore, the frequency decomposition for the data requires technique that will account for the time-varying features of the data that will lead to deduction of physical meaning of the observations. The combination of empirical mode decompo- sition （EMD） and Hilbert transform has been used for extracting the various contributing oscillatory modes （EMDs） and the instantaneous frequency determination （Hilbert transform） of every physically meaningful mode called intrinsic mode func- tion （IMF）. The resulting instantaneous frequencies are used to determine instantaneous wave vectors. The combination of the instantaneous frequencies and wave vectors is useful in the identification of wave modes based on the characteristics of the waves. The results show that EMD-Hilbert can be more reliable than simple Hilbert transform alone.
