Devices on aircraft are subjected to complex environmental excitations that pose risks to their operational safety.Passive vibration isolation techniques are extensively employed due to their advantage of not requirin...Devices on aircraft are subjected to complex environmental excitations that pose risks to their operational safety.Passive vibration isolation techniques are extensively employed due to their advantage of not requiring additional energy sources.This paper introduces a novel metallic vibration isolator based on zigzag structures.The proposed isolator features a compact design and can be manufactured using additive manufacturing techniques,allowing for the integration of structural and functional elements.Firstly,the vibration response of the single-degree-of-freedom(SDOF)system is analyzed.To achieve effective vibration reduction,it is crucial for the isolator's stiffness to be sufficiently low.Secondly,to obtain a structure with high compliance,the traversal algorithm and the finite element method(FEM)are applied.The results confirm that the zigzag structure is a reliable high-compliance configuration.Thirdly,the parametric geometric model of the zigzag structure is developed and its stiffness is calculated.Quasi-static compression experiments validate the accuracy of the calculations.Finally,a specific engineering example is considered,where a zigzag vibration isolator is designed and fabricated.Vibration experiments demonstrate that the zigzag isolator effectively reduces both the stiffness and the fundamental frequency of the vibration system,achieving a vibration isolation efficiency exceeding 60%.展开更多
Hydro-pneumatic near-zero frequency(NZF)vibration isolators have better performance at isolating vibration with low frequencies and heavy loadings when the nonlinear fluidic damping is introduced and the pressurized g...Hydro-pneumatic near-zero frequency(NZF)vibration isolators have better performance at isolating vibration with low frequencies and heavy loadings when the nonlinear fluidic damping is introduced and the pressurized gas pressure is properly adjusted.The nonlinear characteristics of such devices make their corresponding dynamic research involve chaotic dynamics.Chaos may bring negative influence and disorder to the structure and low-frequency working efficiency of isolators,which makes it necessary to clarify and control the threshold ranges for chaos generation in advance.In this work,the chaotic characteristics for a class of hydro-pneumatic NZF vibration isolators under dry friction,harmonic,and environmental noise excitations are analyzed by the analytical and numerical methods.The parameter ranges for the generation of chaos are obtained by the classical and random Melnikov methods.The chaotic characteristics and thresholds of the parameters in the systems with or without noise excitation are discussed and described.The analytical solutions and the influence of noise and harmonic excitation about chaos are tested and further analyzed through many numerical simulations.The results show that chaos in the system can be induced or inhibited with the adjustment of the magnitudes of harmonic excitation and noise intensity.展开更多
In this study, the three-dimensional non-premixed two-phase kerosene/air rotating detonation engines with different isolator configurations and throat area ratios are simulated by the Eulerian-Lagrangian method. The e...In this study, the three-dimensional non-premixed two-phase kerosene/air rotating detonation engines with different isolator configurations and throat area ratios are simulated by the Eulerian-Lagrangian method. The effects of the divergence, straight, and convergence isolators on the rotating detonation wave dynamics and the upstream oblique shock wave propagation mechanism are analyzed. The differences in the rotating detonation wave behaviors between ground and flight operations are clarified.The results indicate that the propagation regimes of the upstream oblique shock wave depend on the isolator configurations and operation conditions. With a divergence isolator, the airflow is accelerated throughout the isolator and divergence section, leading to a maximum Mach number(~1.8) before the normal shock. The total pressure loss reaches the largest, and the detonation pressure drops. The upstream oblique shock wave can be suppressed within the divergence section with the divergence isolator.However, for the straight and convergence isolators, the airflow in the isolator with a larger ψ_(1)(0.3 and0.4) can suffer from the disturbance of the upstream oblique shock wave. The critical incident angle is around 39° at ground operation conditions. The upstream oblique shock wave tends to be suppressed when the engine operates under flight operation conditions. The critical pressure ratio β_(cr0) is found to be able to help in distinguishing the propagation regimes of the upstream oblique shock wave. Slightly below or above the β_(cr0) can obtain different marginal propagation results. The high-speed airflow in the divergence section affects the fuel droplet penetration distance, which deteriorates the reactant mixing and the detonation area. Significant detonation velocity deficits are observed and the maximum velocity deficit reaches 26%. The results indicate the engine channel design should adopt different isolator configurations based on the purpose of total pressure loss or disturbance suppression. This study can provide useful guidance for the channel design of a more complete two-phase rotating detonation engine.展开更多
Periodic isolator is well known for its wave filtering characteristic.While in middle and high frequencies,the internal resonances of the periodic isolator are evident especially when damping is small.This study propo...Periodic isolator is well known for its wave filtering characteristic.While in middle and high frequencies,the internal resonances of the periodic isolator are evident especially when damping is small.This study proposes a novel aperiodic vibration isolation for improving the internal resonances control of the periodic isolator.The mechanism of the internal resonances control by the aperiodic isolator is firstly explained.For comparing the internal resonances suppression effect of the aperiodic isolator with the periodic isolator,a dynamic model combing the rigid machine,the isolator,and the flexible plate is derived through multi subsystem modeling method and transfer matrix method,whose accuracy is verified through the finite element method.The influences of the aperiodicity and damping of the isolator on the vibration isolation performance and internal resonances suppression effect are investigated by numerical analysis.The numerical results demonstrate that vibration attenuation performances of the periodic isolator and aperiodic isolator are greatly over than that of the continuous isolator in middle and high frequencies.The aperiodic isolator opens the stop bandgaps comparing with the periodic isolator where the pass bandgaps are periodically existed.The damping of the isolator has the stop bandgap widening effect on both the periodic isolator and the aperiodic isolator.In addition,a parameter optimization algorithm of the aperiodic isolator is presented for improving the internal resonances control effect.It is shown that the vibration peaks within the target frequency band of the aperiodic isolator are effectively reduced after the optimization.Finally,the experiments of the three different vibration isolation systems are conducted for verifying the analysis work.展开更多
Optical isolators,the photonic analogs of electronic diodes,are essential for ensuring the unidirectional flow of light in optical systems,thereby mitigating the destabilizing effects of back reflections.Thin-film lit...Optical isolators,the photonic analogs of electronic diodes,are essential for ensuring the unidirectional flow of light in optical systems,thereby mitigating the destabilizing effects of back reflections.Thin-film lithium niobate(TFLN),hailed as“the silicon of photonics,”has emerged as a pivotal material in the realm of chip-scale nonlinear optics,propelling the demand for compact optical isolators.We report a breakthrough in the development of a fully passive,integrated optical isolator on the TFLN platform,leveraging the Kerr effect to achieve an impressive 10.3 dB of isolation with a minimal insertion loss of 1.87 dB.Further theoretical simulations have demonstrated that our design,when applied to a microring resonator with a Q factor of 5×10^(6),can achieve 20 dB of isolation with an input power of merely 8 mW.This advancement underscores the immense potential of lithium niobate-based Kerr-effect isolators in propelling the integration and application of high-performance on-chip lasers,heralding a new era in integrated photonics.展开更多
Quasi-zero stiffness(QZS)isolators have received considerable attention over the past years due to their outstanding vibration isolation performance in low-frequency bands.However,traditional mechanisms for achieving ...Quasi-zero stiffness(QZS)isolators have received considerable attention over the past years due to their outstanding vibration isolation performance in low-frequency bands.However,traditional mechanisms for achieving QZS suffer from low stiffness regions and significant nonlinear restoring forces with hardening characteristics,often struggling to withstand excitations with high amplitude.This paper presents a novel QZS vibration isolator that utilizes a more compact spring-rod mechanism(SRM)to provide primary negative stiffness.The nonlinearity of SRM is adjustable via altering the raceway of its spring-rod end,along with the compensatory force provided by the cam-roller mechanism so as to avoid complex nonlinear behaviors.The absolute zero stiffness can be achieved by a well-designed raceway curve with a concise mathematical expression.The nonlinear stiffness with softening properties can also be achieved by parameter adjustment.The study begins with the forcedisplacement relationship of the integrated mechanism first,followed by the design theory of the cam profile.The dynamic response and absolute displacement transmissibility of the isolation system are obtained based on the harmonic balance method.The experimental results show that the proposed vibration isolator maintains relatively low-dynamic stiffness even under non-ideal conditions,and exhibits enhanced vibration isolation performance compared to the corresponding linear isolator.展开更多
Bionic X-shaped vibration isolators have been widely employed in aerospace and other industrial fields,but the stiffness properties of classic X-shaped structures limit the vibration isolation ability for low frequenc...Bionic X-shaped vibration isolators have been widely employed in aerospace and other industrial fields,but the stiffness properties of classic X-shaped structures limit the vibration isolation ability for low frequencies.An innovative bionic quasi-zero stiffness(QZS)vibration isolator(BQZSVI),which can broaden the QZS range of a classic X-shaped isolator and can bring it closer to the equilibrium position,is proposed.The BQZSVI consists of an X-shaped structure as the bone fabric of lower limbs and a nonlinear magnetic loop device simulating the leg muscle.Based on static calculation,the stiffness characteristic of the structure is confirmed.The governing equations of motion of the BQZSVI structure are established in the framework of the Lagrange equation,and the harmonic balance method(HBM)is adopted to obtain the transmissibility responses.The results show that the BQZSVI can provide a more accessible and broader range of QZS.In the dynamic manifestation,the introduction of the BQZSVI can reduce the amplitude of a classic X-shaped vibration isolator by 65.7%,and bring down the initial vibration isolation frequency from 7.43 Hz to 2.39 Hz.In addition,a BQZSVI prototype is designed and fabricated,and the exactitude of the theoretical analysis method is proven by means of experiments.展开更多
To improve the seismic performance of unrein-forced masonry(URM)buildings in the Himalayan re-gions,including Western China,India,Nepal,and Paki-stan,a low-cost bonded scrap tire rubber isolator(BSTRI)is proposed,and ...To improve the seismic performance of unrein-forced masonry(URM)buildings in the Himalayan re-gions,including Western China,India,Nepal,and Paki-stan,a low-cost bonded scrap tire rubber isolator(BSTRI)is proposed,and a series of vertical compression and horizontal shear tests are conducted.Incremental dynamic analyses are conducted for five types of BSTRI-supported URM buildings subjected to 22 far-field and 28 near-field earthquake ground motions.The resulting fragility curves and probability of damage curves are presented and utilized to evaluate the damage states of these buildings.The results show that in the base-isolated(BI)URM buildings under seismic ground motion at a peak ground acceleration(PGA)of 1.102g,the probability of exceeding the collapse prevention threshold is less than 25%under far-field earthquake ground motions and 31%under near-field earthquake ground motions.Furthermore,the maximum average vulnerability index for the BI-URM buildings,which are designed to withstand rare earthquakes with 9°(PGA=0.632g),is 40.87%for far-field earthquake ground motions and 41.83%for near-field earthquake ground motions.Therefore,the adoption of BSTRIs can significantly reduce the collapse probability of URM buildings.展开更多
Objective This study aims to investigate the joint associations of sarcopenia and social isolation with mortality risk.Methods Using data from the Chinese Longitudinal Healthy Longevity Survey(CLHLS)and the UK Biobank...Objective This study aims to investigate the joint associations of sarcopenia and social isolation with mortality risk.Methods Using data from the Chinese Longitudinal Healthy Longevity Survey(CLHLS)and the UK Biobank,sarcopenia was diagnosed according to European and Asian Working Groups for Sarcopenia criteria.Social isolation was assessed using standardized questionnaires,including questions on solitude,frequency of social activities,contact with others,and marital status(for the CLHLS only).Results During the follow-up period,8,249 deaths occurred in the CLHLS and 26,670 deaths in the UK Biobank groups.While no significant interaction was observed between sarcopenia and social isolation in predicting all-cause mortality in the CLHLS cohort,the association between social isolation and mortality was stronger among individuals with sarcopenia in the UK Biobank(P-interaction=0.03,relative risk due to interaction:0.23,95%confidence interval[CI]:0.06–0.41).Further joint analyses showed that participants with sarcopenia and high levels of social isolation had the highest mortality risk(hazard ration[HR]:1.99;95%CI:[1.74–2.28]in the CLHLS and 1.69[1.55–1.85]in the UK Biobank)compared to those without either condition.Conclusion The combination of social isolation and sarcopenia synergistically increases the risk of mortality in middle-aged and older adults across diverse populations.展开更多
The traditional payload attaching fitting (PAF) does not provide any vibration isolation, because of its large stiffness. Whole-spacecraft vibration isolation is a direct and effective approach to assure the successfu...The traditional payload attaching fitting (PAF) does not provide any vibration isolation, because of its large stiffness. Whole-spacecraft vibration isolation is a direct and effective approach to assure the successful launching and orbit insertion of a spacecraft. In view of the problems of stiffness and vibration isolation design, for which the designers care most, the study of whole-spacecraft vibration isolator (WSVI) consists of two parts. In the first part, the stiffness feature of the WSVI is studied...展开更多
Based on analysis of the work conditions and structural characteristics of the exterior pipeline of the aero-engine, a kind of cantilever-structure wire-rope isolator fitted to the exterior pipeline of the aero-engine...Based on analysis of the work conditions and structural characteristics of the exterior pipeline of the aero-engine, a kind of cantilever-structure wire-rope isolator fitted to the exterior pipeline of the aero-engine is designed for supporting and damping purposes. By static experiments, the static hysteresis loop, the relationship of stiffness and amplitude, and the relationship between the energy dissipation coefficient and the amplitude are obtained. Analyses show that the wire-rope isolator presents obvious hysteresis characteristics, and the characteristics of the isolator, such as stiffness and damping, behave obviously nonlinearly when the amplitude value of deformation changes. At the same time, by changing the structure parameters of the wire-rope, the wirerope isolators can be made with different functions to satisfy different work conditions. The research results have important reference values for the application of the wire-rope isolator on the exterior pipeline of an aeroengine.展开更多
To analyze the response of the wall pressure fluctuation in an isolator when the shock train is subjected to a periodic motion at a low frequency,the isolator experiment is conducted in a blow-down supersonic wind tun...To analyze the response of the wall pressure fluctuation in an isolator when the shock train is subjected to a periodic motion at a low frequency,the isolator experiment is conducted in a blow-down supersonic wind tunnel at free stream Mach number of 1.98 under asymmetric incoming flow.Experimental results show that：The isolator effectively isolates the periodic back pressure fluctuation from affecting upstream undisturbed flow;The wall pressure fluctuations are due to the propagation of wave fronts with the second acoustic mode,but they are subjected to an oscillating shock train in the most part of the shock oscillation region;The attenuation of wall pressure fluctuations on the lower wall with thick boundary layer accords with the exponential law,but it fluctuates on the upper wall with thin boundary layer in the shock oscillation region.展开更多
To simulate the actual flowfield at the exit of the supersonic/hypersonic inlet, a wind tunnel is designed to study the flow in the scramjet isolator under the asymmetric incoming flow. And compression fields in the i...To simulate the actual flowfield at the exit of the supersonic/hypersonic inlet, a wind tunnel is designed to study the flow in the scramjet isolator under the asymmetric incoming flow. And compression fields in the isolator are investigated using wall static and pitot pressure measurements. Three incoming Mach numbers are considered as 1.5, 1.8 and 2. Results show that the increase of the asymmetry of the flow at the isolator entrance leads to the increase of the shock train length in the isolator for a given pressure ratio. Based on the analysis of the flow asymmetry effect at the isolator entrance on the shock train length, a modified correlation is proposed to calculate the length of the shock train. Predicted results of the proposed correlation are in good agreement with the experimental data.展开更多
To ascertain the influence of the boundary friction on mechanical properties of disc-spring vibration isolators a load-displacement hysteresis curve formula of disc-spring vibration isolators is derived on the basis o...To ascertain the influence of the boundary friction on mechanical properties of disc-spring vibration isolators a load-displacement hysteresis curve formula of disc-spring vibration isolators is derived on the basis of the energy conservation law as well as considering the effect of the boundary friction.The formula is validated through the finite element analysis and static load tests.On this basis the effect of the boundary friction on the bearing capacity is researched. Then the dynamic performance of disc-spring vibration isolators is studied by dynamic tests.The experimental results indicate that the boundary friction can promise a larger damping with a ratio of 0.23 for disc-spring vibration isolators.Compared with the loading frequency the loading amplitude has a greater impact on the energy consumption dynamic stiffness and damping of vibration isolators.This research can provide valuable information for the design of disc-spring vibration isolators.展开更多
A new type of isolator, the electrorheology (ER) isolator, is mainly described. Through theoretical analysis, a simplified physical model is established under some hypotheses and a series of motion equations are deduc...A new type of isolator, the electrorheology (ER) isolator, is mainly described. Through theoretical analysis, a simplified physical model is established under some hypotheses and a series of motion equations are deduced. According to the transmissibility curve simulation under different electric field strengths, the main factors influencing ER isolator’s working properties have been ascertained. Finally, it proves that ER isolator works well in both low and high frequency zones, it can decrease the force transmitted and enlarge the isolation frequency domain efficiently.展开更多
The performance of a well-designed layer of sand, and composites like layer of sand mixed with shredded rubber tire (RSM) as low cost base isolators, is studied in shake table tests in the laboratory. The building fou...The performance of a well-designed layer of sand, and composites like layer of sand mixed with shredded rubber tire (RSM) as low cost base isolators, is studied in shake table tests in the laboratory. The building foundation is modeled by a 200 mm by 200 mm and 40 mm thick rigid plexi-glass block. The block is placed in the middle of a 1m by 1m tank filled with sand. The selected base isolator is placed between the block and the sand foundation. Accelerometers are placed on top of the footing and foundation sand layer. The displacement of the footing is also measured by LVDT. The whole setup is mounted on a shake table and subjected to sinusoidal motions with varying amplitude and frequency. Sand is found to be effective only at very high amplitude (> 0.65 g) of motions. The performance of a composite consisting of sand and 50% shredded rubber tire placed under the footing is found to be most promising as a low-cost effective base isolator.展开更多
A giant earthquake of magnitude 9.0 occurred in Pacific Ocean off of Tohoku District Japan on March 11,2011. The highest seismic intensity of 7 in JMA scale was recorded in Miyagi. In the Tohoku district, around 230 b...A giant earthquake of magnitude 9.0 occurred in Pacific Ocean off of Tohoku District Japan on March 11,2011. The highest seismic intensity of 7 in JMA scale was recorded in Miyagi. In the Tohoku district, around 230 buildings are seismically isolated （hereafter, SI） mainly by elastomeric isolators （seismic rubber bearings）. According to the official survey reports by several organizations （for example）, the records of those buildings have verified the effectiveness of the seismic isolation. The response acceleration of the SI buildings was reduced by 30% to 50% of the input ground acceleration. Additionally, the difference of the conditions inside the room between SI and the fixed-base buildings was obvious as well as the damage in main structures of the buildings. The displacements of the isolators by the earthquake were around 200 mm according to the records of the instruments. As a result, the performance of SI buildings and the elastomeric isolators in the Tohoku District -- Off the Pacific Ocean Earthquake 2011 were excellent, and the efficiency of the seismic isolation was verified by the records of many buildings in wide area.展开更多
Combustion mode transition is a valuable and challenging research area in dual-mode scramjet engines.The thermal behavior of an isolator with mode transition inducing backpressure is investigated by direct-connect dua...Combustion mode transition is a valuable and challenging research area in dual-mode scramjet engines.The thermal behavior of an isolator with mode transition inducing backpressure is investigated by direct-connect dual-mode scramjet experiments and theoretical analysis.Combustion experiments are conducted under the incoming airflow conditions of total temperature1270 K and Mach 2.A small increment of the fuel equivalence ratio is scheduled to trigger mode transition.Correspondingly,the variation of the coolant flow rate is very small.Based on the measured wall pressures,the heat-transfer model can quantify the thermal state variation of the engine with active cooling.Compared with the combustor,mode transition has a greater effect on the isolator thermal behavior,and it significantly changes the isolator heat-flux and wall temperature.To further study the isolator thermal behavior from flight Mach 4 to Mach 7,a theoretical analysis is carried out.Around the critical point of combustion mode transition,sudden changes of the isolator flowfield and thermal state are discussed.展开更多
Earthquake performance of a flexible one-story building isolated with a variable frequency pendulum isolator （VFPI） under near-fault and far-field ground motions is investigated. The frictional forces mobilized at t...Earthquake performance of a flexible one-story building isolated with a variable frequency pendulum isolator （VFPI） under near-fault and far-field ground motions is investigated. The frictional forces mobilized at the interface of the VFPI are assumed to be velocity dependent. The interaction between frictional forces of the VFPI in two horizontal directions is duly considered and coupled differential equations of motion of the isolated system in the incremental form are solved iteratively. The response of the system with bi-directional interaction is compared with those without interaction. In addition, the effects of velocity dependence on the response of the isolated system are also investigated. Moreover, a parametric study is carried out to critically examine the influence of important parameters on bi-directional interaction effects of the frictional forces of the VFPI. These parameters are： the superstructure time period, frequency variation factor （FVF） and friction coefficient of the VFPI. From the above investigations, it is observed that the dependence of the friction coefficient on relative velocity of the system does not have a noticeable effect on the peak response of the system isolated with VFPI, and that the bi-directional interaction of frictional forces of the VFPI is important and if neglected, isolator displacements will be underestimated and the superstructure acceleration and base shear will be overestimated.展开更多
基金supported by the National Key Research and Development Program of China(Nos.2023YFB4603900,2023YFB4603901)the National Natural Science Foundation of China(No.52275255)。
文摘Devices on aircraft are subjected to complex environmental excitations that pose risks to their operational safety.Passive vibration isolation techniques are extensively employed due to their advantage of not requiring additional energy sources.This paper introduces a novel metallic vibration isolator based on zigzag structures.The proposed isolator features a compact design and can be manufactured using additive manufacturing techniques,allowing for the integration of structural and functional elements.Firstly,the vibration response of the single-degree-of-freedom(SDOF)system is analyzed.To achieve effective vibration reduction,it is crucial for the isolator's stiffness to be sufficiently low.Secondly,to obtain a structure with high compliance,the traversal algorithm and the finite element method(FEM)are applied.The results confirm that the zigzag structure is a reliable high-compliance configuration.Thirdly,the parametric geometric model of the zigzag structure is developed and its stiffness is calculated.Quasi-static compression experiments validate the accuracy of the calculations.Finally,a specific engineering example is considered,where a zigzag vibration isolator is designed and fabricated.Vibration experiments demonstrate that the zigzag isolator effectively reduces both the stiffness and the fundamental frequency of the vibration system,achieving a vibration isolation efficiency exceeding 60%.
基金Project supported by the National Natural Science Foundation of China(Nos.12172340 and12411530068)the Shenzhen Science and Technology Program(No.JCYJ20240813114012016)+2 种基金the High-Level Talent Introduction Plan of Guangzhou Citythe Fundamental Research Funds for the Central Universities-China University of Geosciences(Wuhan)(No.G1323524005)the Young Top-Notch Talent Cultivation Program of Hubei Province。
文摘Hydro-pneumatic near-zero frequency(NZF)vibration isolators have better performance at isolating vibration with low frequencies and heavy loadings when the nonlinear fluidic damping is introduced and the pressurized gas pressure is properly adjusted.The nonlinear characteristics of such devices make their corresponding dynamic research involve chaotic dynamics.Chaos may bring negative influence and disorder to the structure and low-frequency working efficiency of isolators,which makes it necessary to clarify and control the threshold ranges for chaos generation in advance.In this work,the chaotic characteristics for a class of hydro-pneumatic NZF vibration isolators under dry friction,harmonic,and environmental noise excitations are analyzed by the analytical and numerical methods.The parameter ranges for the generation of chaos are obtained by the classical and random Melnikov methods.The chaotic characteristics and thresholds of the parameters in the systems with or without noise excitation are discussed and described.The analytical solutions and the influence of noise and harmonic excitation about chaos are tested and further analyzed through many numerical simulations.The results show that chaos in the system can be induced or inhibited with the adjustment of the magnitudes of harmonic excitation and noise intensity.
基金supported by the National Natural Science Foundation of China (Grant No. 12202204)the Natural Science Foundation of Jiangsu Province (Grant No. BK20220953)+1 种基金the Fundamental Research Funds for the Central Universitiesthe Science and Technology Association's Young Talent Nurturing Program of Jiangsu Province (Grant No. JSTJ-2024-004)
文摘In this study, the three-dimensional non-premixed two-phase kerosene/air rotating detonation engines with different isolator configurations and throat area ratios are simulated by the Eulerian-Lagrangian method. The effects of the divergence, straight, and convergence isolators on the rotating detonation wave dynamics and the upstream oblique shock wave propagation mechanism are analyzed. The differences in the rotating detonation wave behaviors between ground and flight operations are clarified.The results indicate that the propagation regimes of the upstream oblique shock wave depend on the isolator configurations and operation conditions. With a divergence isolator, the airflow is accelerated throughout the isolator and divergence section, leading to a maximum Mach number(~1.8) before the normal shock. The total pressure loss reaches the largest, and the detonation pressure drops. The upstream oblique shock wave can be suppressed within the divergence section with the divergence isolator.However, for the straight and convergence isolators, the airflow in the isolator with a larger ψ_(1)(0.3 and0.4) can suffer from the disturbance of the upstream oblique shock wave. The critical incident angle is around 39° at ground operation conditions. The upstream oblique shock wave tends to be suppressed when the engine operates under flight operation conditions. The critical pressure ratio β_(cr0) is found to be able to help in distinguishing the propagation regimes of the upstream oblique shock wave. Slightly below or above the β_(cr0) can obtain different marginal propagation results. The high-speed airflow in the divergence section affects the fuel droplet penetration distance, which deteriorates the reactant mixing and the detonation area. Significant detonation velocity deficits are observed and the maximum velocity deficit reaches 26%. The results indicate the engine channel design should adopt different isolator configurations based on the purpose of total pressure loss or disturbance suppression. This study can provide useful guidance for the channel design of a more complete two-phase rotating detonation engine.
基金supported by the National Key Research and Development Plan of China (Grant No.2023YFB3406302)Guangdong Basic and Applied Basic Research Foundation (Grant No.2024A1515011126)the Key Research and Development Plan of Shanxi (Grant No.2024GH-ZDXM-29)。
文摘Periodic isolator is well known for its wave filtering characteristic.While in middle and high frequencies,the internal resonances of the periodic isolator are evident especially when damping is small.This study proposes a novel aperiodic vibration isolation for improving the internal resonances control of the periodic isolator.The mechanism of the internal resonances control by the aperiodic isolator is firstly explained.For comparing the internal resonances suppression effect of the aperiodic isolator with the periodic isolator,a dynamic model combing the rigid machine,the isolator,and the flexible plate is derived through multi subsystem modeling method and transfer matrix method,whose accuracy is verified through the finite element method.The influences of the aperiodicity and damping of the isolator on the vibration isolation performance and internal resonances suppression effect are investigated by numerical analysis.The numerical results demonstrate that vibration attenuation performances of the periodic isolator and aperiodic isolator are greatly over than that of the continuous isolator in middle and high frequencies.The aperiodic isolator opens the stop bandgaps comparing with the periodic isolator where the pass bandgaps are periodically existed.The damping of the isolator has the stop bandgap widening effect on both the periodic isolator and the aperiodic isolator.In addition,a parameter optimization algorithm of the aperiodic isolator is presented for improving the internal resonances control effect.It is shown that the vibration peaks within the target frequency band of the aperiodic isolator are effectively reduced after the optimization.Finally,the experiments of the three different vibration isolation systems are conducted for verifying the analysis work.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2022YFF0712800 and 2019YFA0308700)。
文摘Optical isolators,the photonic analogs of electronic diodes,are essential for ensuring the unidirectional flow of light in optical systems,thereby mitigating the destabilizing effects of back reflections.Thin-film lithium niobate(TFLN),hailed as“the silicon of photonics,”has emerged as a pivotal material in the realm of chip-scale nonlinear optics,propelling the demand for compact optical isolators.We report a breakthrough in the development of a fully passive,integrated optical isolator on the TFLN platform,leveraging the Kerr effect to achieve an impressive 10.3 dB of isolation with a minimal insertion loss of 1.87 dB.Further theoretical simulations have demonstrated that our design,when applied to a microring resonator with a Q factor of 5×10^(6),can achieve 20 dB of isolation with an input power of merely 8 mW.This advancement underscores the immense potential of lithium niobate-based Kerr-effect isolators in propelling the integration and application of high-performance on-chip lasers,heralding a new era in integrated photonics.
基金supported by the National Natural Science Foundation of China(Grant No.11732006)the“Qinglan Project”of Jiangsu Higher Education Institutions.
文摘Quasi-zero stiffness(QZS)isolators have received considerable attention over the past years due to their outstanding vibration isolation performance in low-frequency bands.However,traditional mechanisms for achieving QZS suffer from low stiffness regions and significant nonlinear restoring forces with hardening characteristics,often struggling to withstand excitations with high amplitude.This paper presents a novel QZS vibration isolator that utilizes a more compact spring-rod mechanism(SRM)to provide primary negative stiffness.The nonlinearity of SRM is adjustable via altering the raceway of its spring-rod end,along with the compensatory force provided by the cam-roller mechanism so as to avoid complex nonlinear behaviors.The absolute zero stiffness can be achieved by a well-designed raceway curve with a concise mathematical expression.The nonlinear stiffness with softening properties can also be achieved by parameter adjustment.The study begins with the forcedisplacement relationship of the integrated mechanism first,followed by the design theory of the cam profile.The dynamic response and absolute displacement transmissibility of the isolation system are obtained based on the harmonic balance method.The experimental results show that the proposed vibration isolator maintains relatively low-dynamic stiffness even under non-ideal conditions,and exhibits enhanced vibration isolation performance compared to the corresponding linear isolator.
基金Project supported by the National Natural Science Foundation of China(No.U23A2066)the Liaoning Revitalization Talents Program of China(No.XLYC2202032)。
文摘Bionic X-shaped vibration isolators have been widely employed in aerospace and other industrial fields,but the stiffness properties of classic X-shaped structures limit the vibration isolation ability for low frequencies.An innovative bionic quasi-zero stiffness(QZS)vibration isolator(BQZSVI),which can broaden the QZS range of a classic X-shaped isolator and can bring it closer to the equilibrium position,is proposed.The BQZSVI consists of an X-shaped structure as the bone fabric of lower limbs and a nonlinear magnetic loop device simulating the leg muscle.Based on static calculation,the stiffness characteristic of the structure is confirmed.The governing equations of motion of the BQZSVI structure are established in the framework of the Lagrange equation,and the harmonic balance method(HBM)is adopted to obtain the transmissibility responses.The results show that the BQZSVI can provide a more accessible and broader range of QZS.In the dynamic manifestation,the introduction of the BQZSVI can reduce the amplitude of a classic X-shaped vibration isolator by 65.7%,and bring down the initial vibration isolation frequency from 7.43 Hz to 2.39 Hz.In addition,a BQZSVI prototype is designed and fabricated,and the exactitude of the theoretical analysis method is proven by means of experiments.
基金The National Natural Science Foundation of China(No.52208195)the Independent Subject of State Key Laboratory of Disaster Reduction in Civil Engineering of Tongji University(No.SLDRCE19-A-10).
文摘To improve the seismic performance of unrein-forced masonry(URM)buildings in the Himalayan re-gions,including Western China,India,Nepal,and Paki-stan,a low-cost bonded scrap tire rubber isolator(BSTRI)is proposed,and a series of vertical compression and horizontal shear tests are conducted.Incremental dynamic analyses are conducted for five types of BSTRI-supported URM buildings subjected to 22 far-field and 28 near-field earthquake ground motions.The resulting fragility curves and probability of damage curves are presented and utilized to evaluate the damage states of these buildings.The results show that in the base-isolated(BI)URM buildings under seismic ground motion at a peak ground acceleration(PGA)of 1.102g,the probability of exceeding the collapse prevention threshold is less than 25%under far-field earthquake ground motions and 31%under near-field earthquake ground motions.Furthermore,the maximum average vulnerability index for the BI-URM buildings,which are designed to withstand rare earthquakes with 9°(PGA=0.632g),is 40.87%for far-field earthquake ground motions and 41.83%for near-field earthquake ground motions.Therefore,the adoption of BSTRIs can significantly reduce the collapse probability of URM buildings.
基金supported by grants from the National Key Research and Development Program of China(No.2023YFC3606300,No.2022YFC3600300)the National Natural Science Foundation of China(No.82325043)the National Key Research and Development Program of Hubei Province(2022BCA036)。
文摘Objective This study aims to investigate the joint associations of sarcopenia and social isolation with mortality risk.Methods Using data from the Chinese Longitudinal Healthy Longevity Survey(CLHLS)and the UK Biobank,sarcopenia was diagnosed according to European and Asian Working Groups for Sarcopenia criteria.Social isolation was assessed using standardized questionnaires,including questions on solitude,frequency of social activities,contact with others,and marital status(for the CLHLS only).Results During the follow-up period,8,249 deaths occurred in the CLHLS and 26,670 deaths in the UK Biobank groups.While no significant interaction was observed between sarcopenia and social isolation in predicting all-cause mortality in the CLHLS cohort,the association between social isolation and mortality was stronger among individuals with sarcopenia in the UK Biobank(P-interaction=0.03,relative risk due to interaction:0.23,95%confidence interval[CI]:0.06–0.41).Further joint analyses showed that participants with sarcopenia and high levels of social isolation had the highest mortality risk(hazard ration[HR]:1.99;95%CI:[1.74–2.28]in the CLHLS and 1.69[1.55–1.85]in the UK Biobank)compared to those without either condition.Conclusion The combination of social isolation and sarcopenia synergistically increases the risk of mortality in middle-aged and older adults across diverse populations.
基金Commission of Science Technology and Industry for National Defense Project (C4120062301)
文摘The traditional payload attaching fitting (PAF) does not provide any vibration isolation, because of its large stiffness. Whole-spacecraft vibration isolation is a direct and effective approach to assure the successful launching and orbit insertion of a spacecraft. In view of the problems of stiffness and vibration isolation design, for which the designers care most, the study of whole-spacecraft vibration isolator (WSVI) consists of two parts. In the first part, the stiffness feature of the WSVI is studied...
基金The National Natural Science Foundation of China(No50275030)
文摘Based on analysis of the work conditions and structural characteristics of the exterior pipeline of the aero-engine, a kind of cantilever-structure wire-rope isolator fitted to the exterior pipeline of the aero-engine is designed for supporting and damping purposes. By static experiments, the static hysteresis loop, the relationship of stiffness and amplitude, and the relationship between the energy dissipation coefficient and the amplitude are obtained. Analyses show that the wire-rope isolator presents obvious hysteresis characteristics, and the characteristics of the isolator, such as stiffness and damping, behave obviously nonlinearly when the amplitude value of deformation changes. At the same time, by changing the structure parameters of the wire-rope, the wirerope isolators can be made with different functions to satisfy different work conditions. The research results have important reference values for the application of the wire-rope isolator on the exterior pipeline of an aeroengine.
基金Supported by the National Natural Science Foundation of China(10572059)~~
文摘To analyze the response of the wall pressure fluctuation in an isolator when the shock train is subjected to a periodic motion at a low frequency,the isolator experiment is conducted in a blow-down supersonic wind tunnel at free stream Mach number of 1.98 under asymmetric incoming flow.Experimental results show that：The isolator effectively isolates the periodic back pressure fluctuation from affecting upstream undisturbed flow;The wall pressure fluctuations are due to the propagation of wave fronts with the second acoustic mode,but they are subjected to an oscillating shock train in the most part of the shock oscillation region;The attenuation of wall pressure fluctuations on the lower wall with thick boundary layer accords with the exponential law,but it fluctuates on the upper wall with thin boundary layer in the shock oscillation region.
文摘To simulate the actual flowfield at the exit of the supersonic/hypersonic inlet, a wind tunnel is designed to study the flow in the scramjet isolator under the asymmetric incoming flow. And compression fields in the isolator are investigated using wall static and pitot pressure measurements. Three incoming Mach numbers are considered as 1.5, 1.8 and 2. Results show that the increase of the asymmetry of the flow at the isolator entrance leads to the increase of the shock train length in the isolator for a given pressure ratio. Based on the analysis of the flow asymmetry effect at the isolator entrance on the shock train length, a modified correlation is proposed to calculate the length of the shock train. Predicted results of the proposed correlation are in good agreement with the experimental data.
基金Transformation Program of Science and Technology Achievements of Jiangsu Province(No.BA2008030)
文摘To ascertain the influence of the boundary friction on mechanical properties of disc-spring vibration isolators a load-displacement hysteresis curve formula of disc-spring vibration isolators is derived on the basis of the energy conservation law as well as considering the effect of the boundary friction.The formula is validated through the finite element analysis and static load tests.On this basis the effect of the boundary friction on the bearing capacity is researched. Then the dynamic performance of disc-spring vibration isolators is studied by dynamic tests.The experimental results indicate that the boundary friction can promise a larger damping with a ratio of 0.23 for disc-spring vibration isolators.Compared with the loading frequency the loading amplitude has a greater impact on the energy consumption dynamic stiffness and damping of vibration isolators.This research can provide valuable information for the design of disc-spring vibration isolators.
文摘A new type of isolator, the electrorheology (ER) isolator, is mainly described. Through theoretical analysis, a simplified physical model is established under some hypotheses and a series of motion equations are deduced. According to the transmissibility curve simulation under different electric field strengths, the main factors influencing ER isolator’s working properties have been ascertained. Finally, it proves that ER isolator works well in both low and high frequency zones, it can decrease the force transmitted and enlarge the isolation frequency domain efficiently.
基金funding by Bhabha Atomic Research Centre (BARC),Mumbai
文摘The performance of a well-designed layer of sand, and composites like layer of sand mixed with shredded rubber tire (RSM) as low cost base isolators, is studied in shake table tests in the laboratory. The building foundation is modeled by a 200 mm by 200 mm and 40 mm thick rigid plexi-glass block. The block is placed in the middle of a 1m by 1m tank filled with sand. The selected base isolator is placed between the block and the sand foundation. Accelerometers are placed on top of the footing and foundation sand layer. The displacement of the footing is also measured by LVDT. The whole setup is mounted on a shake table and subjected to sinusoidal motions with varying amplitude and frequency. Sand is found to be effective only at very high amplitude (> 0.65 g) of motions. The performance of a composite consisting of sand and 50% shredded rubber tire placed under the footing is found to be most promising as a low-cost effective base isolator.
文摘A giant earthquake of magnitude 9.0 occurred in Pacific Ocean off of Tohoku District Japan on March 11,2011. The highest seismic intensity of 7 in JMA scale was recorded in Miyagi. In the Tohoku district, around 230 buildings are seismically isolated （hereafter, SI） mainly by elastomeric isolators （seismic rubber bearings）. According to the official survey reports by several organizations （for example）, the records of those buildings have verified the effectiveness of the seismic isolation. The response acceleration of the SI buildings was reduced by 30% to 50% of the input ground acceleration. Additionally, the difference of the conditions inside the room between SI and the fixed-base buildings was obvious as well as the damage in main structures of the buildings. The displacements of the isolators by the earthquake were around 200 mm according to the records of the instruments. As a result, the performance of SI buildings and the elastomeric isolators in the Tohoku District -- Off the Pacific Ocean Earthquake 2011 were excellent, and the efficiency of the seismic isolation was verified by the records of many buildings in wide area.
文摘Combustion mode transition is a valuable and challenging research area in dual-mode scramjet engines.The thermal behavior of an isolator with mode transition inducing backpressure is investigated by direct-connect dual-mode scramjet experiments and theoretical analysis.Combustion experiments are conducted under the incoming airflow conditions of total temperature1270 K and Mach 2.A small increment of the fuel equivalence ratio is scheduled to trigger mode transition.Correspondingly,the variation of the coolant flow rate is very small.Based on the measured wall pressures,the heat-transfer model can quantify the thermal state variation of the engine with active cooling.Compared with the combustor,mode transition has a greater effect on the isolator thermal behavior,and it significantly changes the isolator heat-flux and wall temperature.To further study the isolator thermal behavior from flight Mach 4 to Mach 7,a theoretical analysis is carried out.Around the critical point of combustion mode transition,sudden changes of the isolator flowfield and thermal state are discussed.
文摘Earthquake performance of a flexible one-story building isolated with a variable frequency pendulum isolator （VFPI） under near-fault and far-field ground motions is investigated. The frictional forces mobilized at the interface of the VFPI are assumed to be velocity dependent. The interaction between frictional forces of the VFPI in two horizontal directions is duly considered and coupled differential equations of motion of the isolated system in the incremental form are solved iteratively. The response of the system with bi-directional interaction is compared with those without interaction. In addition, the effects of velocity dependence on the response of the isolated system are also investigated. Moreover, a parametric study is carried out to critically examine the influence of important parameters on bi-directional interaction effects of the frictional forces of the VFPI. These parameters are： the superstructure time period, frequency variation factor （FVF） and friction coefficient of the VFPI. From the above investigations, it is observed that the dependence of the friction coefficient on relative velocity of the system does not have a noticeable effect on the peak response of the system isolated with VFPI, and that the bi-directional interaction of frictional forces of the VFPI is important and if neglected, isolator displacements will be underestimated and the superstructure acceleration and base shear will be overestimated.
