Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive ...Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.展开更多
The large manipulator outside the space cabin is a multi-degree of freedom actuator for space operations.In order to realize the automatic control and flexible operation of the space manipulator,a novel spoke structur...The large manipulator outside the space cabin is a multi-degree of freedom actuator for space operations.In order to realize the automatic control and flexible operation of the space manipulator,a novel spoke structure piezoelectric six-dimensional force/torque sensor with redundancy ability,high stiffness and good decoupling performance is innovatively proposed.Based on the deformation coordination relationship,the redundancy measurement mechanism is revealed.The mathematical models of the sensor with and without branch fault are established respectively.The finite element model is established to verify the feasibility of structure and redundancy measuring principle of the sensor.Depending on the theoretical analysis and simulation analysis,the prototype of the sensor is developed.Static and dynamic calibration experiments are carried out.The actual output voltage signal of the six-dimensional force/torque sensor is collected to establish the equation between the standard input applied load and the actual output voltage signal.Based on ant colony optimized BP algorithm,performance indexes of the sensor with and without branch fault are analyzed respectively.The experimental results show that the spoke piezoelectric sixdimensional force/torque sensor with the eight-point support structure has good accuracy and reliability.Meanwhile,it has strong decoupling characteristic that can effectively shield the coupling between dimensions.The nonlinear errors and maximum interference errors of decoupled data with and without branch faults are less than 1% and 2%,respectively.The natural frequency of the sixdimensional force sensor can reach 2856.45 Hz and has good dynamic characteristics.The research content lays a theoretical and experimental foundation for the design,development and application of the new six-dimensional force/torque sensors with redundancy.Meanwhile,it will significantly improve the research level in this field,and provide a strong guarantee for the smooth implementation of force feedback control of the space station manipulator project.展开更多
This study presents a closed-form solution for central stress,a semi-analytical model,and a modified anisotropic semi-analytical model to efficiently calculate the forcefrequency coefficients(FFCs)of square quartz cry...This study presents a closed-form solution for central stress,a semi-analytical model,and a modified anisotropic semi-analytical model to efficiently calculate the forcefrequency coefficients(FFCs)of square quartz crystal resonators(QCRs)with different side lengths and azimuth angles under eccentrically concentrated and distributed loads.The semi-analytical model is validated by comparisons between the experimental results and the nonlinear finite element method(FEM)simulation results.Based on the semi-analytical model for the FFC and nonlinear FEM simulations,the FFC variations of square QCRs under external loads and the related mechanisms are investigated.Among the initial stresses caused by external loads,the central stress parallel to the xcrystallographic axis is the primary factor influencing the FFC of quartz.Our findings can provide practical tools for calculating the FFC,and help the design and development of square quartz force sensors.展开更多
Human skin,through its complex mechanoreceptor system,possesses the exceptional ability to finely perceive and dif-ferentiate multimodal mechanical stimuli,forming the biological foundation for dexterous manipulation,...Human skin,through its complex mechanoreceptor system,possesses the exceptional ability to finely perceive and dif-ferentiate multimodal mechanical stimuli,forming the biological foundation for dexterous manipulation,environmental explo-ration,and tactile perception.Tactile sensors that emulate this sensory capability,particularly in the detection,decoupling,and application of normal and shear forces,have made significant strides in recent years.This review comprehensively examines the latest research advancements in tactile sensors for normal and shear force sensing,delving into the design and decoupling methods of multi-unit structures,multilayer encapsulation structures,and bionic structures.It analyzes the advantages and disadvantages of various sensing principles,including piezoresistive,capacitive,and self-powered mechanisms,and evalu-ates their application potential in health monitoring,robotics,wearable devices,smart prosthetics,and human-machine interaction.By systematically summarizing current research progress and technical challenges,this review aims to provide forward-looking insights into future research directions,driving the development of electronic skin technology to ultimately achieve tactile perception capabilities comparable to human skin.展开更多
A new concept of banana vibrating screen which has the same effect as traditional banana vibrating screen in a new way was put forward.The dynamic model of vibrating screen was established and its working principle wa...A new concept of banana vibrating screen which has the same effect as traditional banana vibrating screen in a new way was put forward.The dynamic model of vibrating screen was established and its working principle was analyzed when the action line of the exciting force did not act through the centroid of screen box.Moreover,the dynamic differential equations of centroid and screen surface were obtained.The motions of centroid and screen surface were simulated with actual parameters of the design example in Matlab/Simulink.The results show that not only the amplitude has a significant decrease from 9.38 to 4.10 mm,but also the throwing index and vibrating direction angle have a significant decrease from 10.49 to 4.59,and from 58.10° to 33.29°,respectively,along the screen surface,which indicates that motion characteristics of vibrating screen are consistent with those of traditional banana vibrating screen only by means of a single angle of screen surface.What's more,such banana vibrating screen of variable linear trajectory with greater processing capacity could be obtained by adjusting the relative position of force center and the centroid of screen box properly.展开更多
Flexible tactile sensors have broad applications in human physiological monitoring,robotic operation and human-machine interaction.However,the research of wearable and flexible tactile sensors with high sensitivity,wi...Flexible tactile sensors have broad applications in human physiological monitoring,robotic operation and human-machine interaction.However,the research of wearable and flexible tactile sensors with high sensitivity,wide sensing range and ability to detect three-dimensional(3D)force is still very challenging.Herein,a flexible tactile electronic skin sensor based on carbon nanotubes(CNTs)/polydimethylsiloxane(PDMS)nanocomposites is presented for 3D contact force detection.The 3D forces were acquired from combination of four specially designed cells in a sensing element.Contributed from the double-sided rough porous structure and specific surface morphology of nanocomposites,the piezoresistive sensor possesses high sensitivity of 12.1 kPa?1 within the range of 600 Pa and 0.68 kPa?1 in the regime exceeding 1 kPa for normal pressure,as well as 59.9 N?1 in the scope of<0.05 N and>2.3 N?1 in the region of<0.6 N for tangential force with ultra-low response time of 3.1 ms.In addition,multi-functional detection in human body monitoring was employed with single sensing cell and the sensor array was integrated into a robotic arm for objects grasping control,indicating the capacities in intelligent robot applications.展开更多
The six-component force/torque sensor has become one kind of the most important sensors with the ability of measuring all the external forces and torques. A novel hyperstatic six-component force/torque sensor based on...The six-component force/torque sensor has become one kind of the most important sensors with the ability of measuring all the external forces and torques. A novel hyperstatic six-component force/torque sensor based on the Stewart platform structure, which can be used for the force measurement of the robot wrist, is proposed, and its structural optimal design, finite element analysis and calibration experimentation is presented. The characteristic of the sensor structure is analyzed in comparison with the traditional Stewart platform-based sensor. The mathematical expression of the sensor＇s force mapping matrix is introduced. The condition number and generalized amplifying coefficient defined by singular values of force Jacobian matrix are used to evaluate the performances of isotropy and sensitivity of the sensor respectively. The optimal design of the sensor structure is performed with the objective of achieving high measurement sensitivity and good isotropy. The sensor prototype is fabricated, and the static and dynamic characteristics of the sensor are analyzed with finite element analysis software package ANSYS. The calibration device is manufactured, and the data acquisition and processing system is developed. The theoretical and experimental study of the static calibration of the sensor prototype is carried out. The results of simulation analysis and calibration experimentation prove the feasibility of the hyperstatic sensor structure, and the contents of this paper possess theoretical significance and engineering value for the further research and practical application of the six-component force sensor.展开更多
A six-axis force sensor with parallel 8/4-4 structure is introduced and its measurement principle is analyzed.Based on condition numbers of Jacobian matrix spectral norm of the sensor,the relationship between the forc...A six-axis force sensor with parallel 8/4-4 structure is introduced and its measurement principle is analyzed.Based on condition numbers of Jacobian matrix spectral norm of the sensor,the relationship between the force and moment isotropy and some structural parameters is deduced.Orthogonal test methods are used to determine the degree of primary and secondary factors that have significant effect on sensor characteristics.Furthermore,the relationship between each performance index and the structural parameters of the sensor is analyzed by the method of the atlas,which lays a foundation for structural optimization design of the force sensor.展开更多
Robot＇s dynamic motion error and on-line compensation based on multi-axis force sensor are dealt with.It is revealed that the reasons of the error are formed and the relations of the error are delivered.A motion equa...Robot＇s dynamic motion error and on-line compensation based on multi-axis force sensor are dealt with.It is revealed that the reasons of the error are formed and the relations of the error are delivered.A motion equation of robot＇s termination with the error is established,and then,an error matrix and an error compensation matrix of the motion equation are also defined.An on-line error＇s compensation method is put forward to decrease the displacement error,which is a degree of millimeter,shown by the result of simulation of PUMA562 robot.展开更多
The development of the sensor suitable for measuring large load stress to the anchor cable becomes an important task in bridge construction and maintenance. Therefore, a new type of optical fiber sensor was developed ...The development of the sensor suitable for measuring large load stress to the anchor cable becomes an important task in bridge construction and maintenance. Therefore, a new type of optical fiber sensor was developed in the laboratory - optical fiber grating sensor for force measurement of anchor cable （OFBFMAC）. No similar report about this kind of sensor has been found up to now in China and other countries. This sensor is proved to be an effective way of monitoring in processes of anchor cable installation, cable cutting, cable force regulation, etc, with the accurate and repeatable measuring results. Its successful application in the tie bar cable force safety monitoring for Wuhan Qingchuan bridge is a new exploration of optical fiber grating sensing technology in bridge tie bar monitoring system.展开更多
This paper presents a new designed miniature six DOF （degree of freedom） force/torque sensor. This sensor is fully integrated with a micro DSP （digital signal processor）, so all the signal conditioning, A/D, decou...This paper presents a new designed miniature six DOF （degree of freedom） force/torque sensor. This sensor is fully integrated with a micro DSP （digital signal processor）, so all the signal conditioning, A/D, decoupling, digital-signals serial output are performed in the sensor. Some experimental results are presented to demonstrate the capability of the proposed design. Finally, a neural network was used for decoupling the interacting signals, compared with the conventional method using the inverse matrix, this new method is more accurate.展开更多
The aim of this work is to model and analyze the behavior of a new smart nano force sensor.To do so,the carbon nanotube has been used as a suspended gate of a metal-oxide-semiconductor field-effect transistor(MOSFET)....The aim of this work is to model and analyze the behavior of a new smart nano force sensor.To do so,the carbon nanotube has been used as a suspended gate of a metal-oxide-semiconductor field-effect transistor(MOSFET).The variation of the applied force on the carbon nanotube(CNT)generates a variation of the capacity of the transistor oxide-gate and therefore the variation of the threshold voltage,which allows the MOSFET to become a capacitive nano force sensor.The sensitivity of the nano force sensor can reach 0.12431V/nN.This sensitivity is greater than results in the literature.We have found through this study that the response of the sensor depends strongly on the geometric and physical parameters of the CNT.From the results obtained in this study,it can be seen that the increase in the applied force increases the value of the MOSFET threshold voltage VTh.In this paper,we first used artificial neural networks to faithfully reproduce the response of the nano force sensor model.This neural model is called direct model.Then,secondly,we designed an inverse model called an intelligent sensor which allows linearization of the response of our developed force sensor.展开更多
In the surgery of lumbar disc herniation(LDH),the nerve root retractor is used to pull the nerve root to prevent damage.The traditional medical nerve root retractor cannot quantify the force on the nerve root.In order...In the surgery of lumbar disc herniation(LDH),the nerve root retractor is used to pull the nerve root to prevent damage.The traditional medical nerve root retractor cannot quantify the force on the nerve root.In order to improve the nerve root retractor,this paper proposes an intraoperative lumbar neurological force monitoring system.The core module of this system is the improved nerve root retractor equipped with the high density flexible pressure sensor array.The high density microneedle array and multiple pressure detection units are used in the pressure sensor to realise sensitive pressure monitoring in a narrow surgical operation area.The sensing area is 4 mm×17 mm,including 6 detection units.The sensitivity of sensor is 67.30%/N in the range of 0-5 N.This system is used for in vitro animal experiments,which can continuously detect pressure.展开更多
This paper presents the isotropic optimization of a Stewart-type six-component force sensor. First,the static model of the sensor is built by the screw theory and the forward isotropy indexes and the inverse isotropy ...This paper presents the isotropic optimization of a Stewart-type six-component force sensor. First,the static model of the sensor is built by the screw theory and the forward isotropy indexes and the inverse isotropy indexes are further presented. Second,a comprehensive evaluation function is established to evaluate the isotropic performance of the sensor. By compromising all the isotropy indexes and solving the extreme value of the function,the sensor optimization process is completed and an optimal solution of a set of sensor structure parameters is obtained. Finally,the design of the components and the assembly of the prototype are established by 3D modeling software Pro-E. The verification of the isotropic performance of the sensor is conducted by the finite element analysis software ANSYS. The results obtained by our research can provide useful reference to the isotropic performance evaluation and structure design of the stewart-type six-component force sensor.展开更多
Compression force sensors are indispensable to tactile sensors in humanoid robots. We are investigating the application of low-cost electrically conducting rubber sheets to force sensors, of which the biggest problem ...Compression force sensors are indispensable to tactile sensors in humanoid robots. We are investigating the application of low-cost electrically conducting rubber sheets to force sensors, of which the biggest problem is its poor reproducibility. We have found that the deposition of aluminum by a vacuum evaporation method shows such an excellent characteristic that the sensor can be used in a wide range under 10.33 N/cm2. In this article, we investigated time response of the sensors and also studied how the radiation heating during the vacuum evaporation process for Al deposition affected their sensing property. We found that the radiation heating induces deterioration from the point of view of standard deviation of the output voltage of the sensors at a transient region. We convince that a low-temperature Al deposition method should be developed to form electrodes on the electrical conducting rubber sensors.展开更多
Tactile sensors are believed to be a key element in order to realize robotic fingers to catch a fragile object without damage. Force sensitive conductive rubber is a low-cost material and then attractive for the appli...Tactile sensors are believed to be a key element in order to realize robotic fingers to catch a fragile object without damage. Force sensitive conductive rubber is a low-cost material and then attractive for the application to tactile sensors. We have studied the effect of electrodes attached to the rubber sheets. We have tried four kinds of electrodes: vacuum deposited Al, adhesive Cu tape, Al thin film sheet and silver paste. It can be concluded that vacuum deposited Al has the highest potential from the practical point of view;it has the widest dynamic range and good precision at the same time.展开更多
Negative step response experimental method is used in wrist force sensor＇s dynamic performance calibration. The exciting manner of negative step response method is the same as wrist force sensor＇s load in working. T...Negative step response experimental method is used in wrist force sensor＇s dynamic performance calibration. The exciting manner of negative step response method is the same as wrist force sensor＇s load in working. This experimental method needn＇t special experiment equipments. Experiment＇s dynamic repeatability is good. So wrist force sensor＇s dynamic performance is suitable to be calibrated by negative step response method. A new correlation wavelet transfer method is studied. By wavelet transfer method, the signal is decomposed into two dimensional spaces of time-frequency. So the problem of negative step exciting energy concentrating in the low frequency band is solved. Correlation wavelet transfer doesn＇t require that wavelet primary function be orthogonal and needn＇t wavelet reconstruction. So analyzing efficiency is high. An experimental bench is designed and manufactured to load the wrist force sensor orthogonal excitation force/moment. A piezoelectric force sensor is used to setup soft trigger and calculate the value of negative step excitation. A wrist force sensor is calibrated. The pulse response function is calculated after negative step excitation and step response have been transformed to positive step excitation and step response. The pulse response function is transferred to frequency response function. The wrist force sensor＇s dynamic characteristics are identified by the frequency response function.展开更多
In order to adapt to the specific task, the six-axis dynamic contact force between end-effectors of intelligent robots and working condition needs to be perceived. Therefore, the dynamic property of six-axis force sen...In order to adapt to the specific task, the six-axis dynamic contact force between end-effectors of intelligent robots and working condition needs to be perceived. Therefore, the dynamic property of six-axis force sensor which is installed on the end-effectors of intelligent robots will have influence on the veracity of detection and judgment to working environment contact force by intelligent robots directly. In this paper, dynamic analysis to double-layer and pre-stressed multi-limb six-axis force sensor is conducted. First, the structure of the sensor is introduced, and the limb number is confirmed by introducing the related definitions of convex analysis. Then, based on vibration of multiple-degree-of-freedom system, a mechanical vibration simplified model of double-layer and pre-stressed multiple limb six-axis force sensor is set up. After that, movement differential equations of sensor and the response of analytical expression are deduced, and the movement differential equations is solved. Finally, taking the double-layer and pre-stressed seven limb six-axis force sensor as an example, numerical calculation and simulation of deriving result is conducted, which verify the correctness and feasibility of the theoretical analysis.展开更多
Compressive force sensors or pressure sensors are indispensable to tactile sensors in humanoid robots. It is investigated that low-cost electro-conducting rubber sheets are applied to the force sensor, of which the bi...Compressive force sensors or pressure sensors are indispensable to tactile sensors in humanoid robots. It is investigated that low-cost electro-conducting rubber sheets are applied to the force sensor, of which the biggest problem is its poor reproducibility. It was found that the aluminum deposition by a vacuum evaporation method shows excellent characteristics but suffers deterioration by a radiation heating effect. The aluminum electrode was deposited by a sputtering method, known to have an advantage of a low-temperature method, and the reproducibility of the output was improved.展开更多
Haptic interaction plays an important role in the virtual reality technology,which let a person not only view the 3D virtual environment but also realistically touch the virtual environment.As a key part of haptic int...Haptic interaction plays an important role in the virtual reality technology,which let a person not only view the 3D virtual environment but also realistically touch the virtual environment.As a key part of haptic interaction,force feedback has become an essential function for the haptic interaction.Therefore,multi-dimensional force sensors are widely used in the fields of virtual reality and augmented reality.In this paper,some conventional multi-dimensional force sensors based on different measurement principles,such as resistive,capacitive,piezoelectric,are briefly introduced.Then the mechanical structures of the elastic body of multi-dimensional force sensors are reviewed.It is obvious that the performance of the multi-dimensional force sensor is mainly dependent upon the mechanical structure of elastic body.Furthermore,the calibration process of the force sensor is analyzed,and problems in calibration are discussed.Interdimensional coupling error is one of the main factors affecting the measurement precision of the multi-dimensional force sensors.Therefore,reducing or even eliminating dimensional coupling error becomes a fundamental requirement in the design of multi-dimensional force sensors,and the decoupling state-of-art of the multi-dimensional force sensors are introduced in this paper.At last,the trends and current challenges of multi-dimensional force sensing technology are proposed.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.52272160,U2330112,and 52002254)Sichuan Science and Technology Foundation(Nos.2020YJ0262,2021YFH0127,2022YFH0083,2022YFSY0045,and 2023YFSY0002)+1 种基金the Chunhui Plan of Ministry of Education,Fundamental Research Funds for the Central Universities,China(No.YJ201893)the Foundation of Key Laboratory of Lidar and Device,Sichuan Province,China(No.LLD2023-006)。
文摘Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.
基金supported by the National Natural Science Foundation of China(No.51875250)a Project of Shandong Province Higher Educational Youth Innovation Science and Technology Program,China(No.2019KJB018)a Project of the“20 Regulations for New Universities”Funding Program of Jinan,China(No.202228116)。
文摘The large manipulator outside the space cabin is a multi-degree of freedom actuator for space operations.In order to realize the automatic control and flexible operation of the space manipulator,a novel spoke structure piezoelectric six-dimensional force/torque sensor with redundancy ability,high stiffness and good decoupling performance is innovatively proposed.Based on the deformation coordination relationship,the redundancy measurement mechanism is revealed.The mathematical models of the sensor with and without branch fault are established respectively.The finite element model is established to verify the feasibility of structure and redundancy measuring principle of the sensor.Depending on the theoretical analysis and simulation analysis,the prototype of the sensor is developed.Static and dynamic calibration experiments are carried out.The actual output voltage signal of the six-dimensional force/torque sensor is collected to establish the equation between the standard input applied load and the actual output voltage signal.Based on ant colony optimized BP algorithm,performance indexes of the sensor with and without branch fault are analyzed respectively.The experimental results show that the spoke piezoelectric sixdimensional force/torque sensor with the eight-point support structure has good accuracy and reliability.Meanwhile,it has strong decoupling characteristic that can effectively shield the coupling between dimensions.The nonlinear errors and maximum interference errors of decoupled data with and without branch faults are less than 1% and 2%,respectively.The natural frequency of the sixdimensional force sensor can reach 2856.45 Hz and has good dynamic characteristics.The research content lays a theoretical and experimental foundation for the design,development and application of the new six-dimensional force/torque sensors with redundancy.Meanwhile,it will significantly improve the research level in this field,and provide a strong guarantee for the smooth implementation of force feedback control of the space station manipulator project.
基金supported by the Ningbo Youth Science and Technology Innovation Leading Talents of China(No.2023QL020)the Ningbo Science and Technology Major of China(No.2022Z015)the K.C.Wong Magana Fund through Ningbo University。
文摘This study presents a closed-form solution for central stress,a semi-analytical model,and a modified anisotropic semi-analytical model to efficiently calculate the forcefrequency coefficients(FFCs)of square quartz crystal resonators(QCRs)with different side lengths and azimuth angles under eccentrically concentrated and distributed loads.The semi-analytical model is validated by comparisons between the experimental results and the nonlinear finite element method(FEM)simulation results.Based on the semi-analytical model for the FFC and nonlinear FEM simulations,the FFC variations of square QCRs under external loads and the related mechanisms are investigated.Among the initial stresses caused by external loads,the central stress parallel to the xcrystallographic axis is the primary factor influencing the FFC of quartz.Our findings can provide practical tools for calculating the FFC,and help the design and development of square quartz force sensors.
基金supported by the National Key Research and Development Program of China (No.2021YFA1401103)the National Natural Science Foundation of China (Nos.61825403,61921005).
文摘Human skin,through its complex mechanoreceptor system,possesses the exceptional ability to finely perceive and dif-ferentiate multimodal mechanical stimuli,forming the biological foundation for dexterous manipulation,environmental explo-ration,and tactile perception.Tactile sensors that emulate this sensory capability,particularly in the detection,decoupling,and application of normal and shear forces,have made significant strides in recent years.This review comprehensively examines the latest research advancements in tactile sensors for normal and shear force sensing,delving into the design and decoupling methods of multi-unit structures,multilayer encapsulation structures,and bionic structures.It analyzes the advantages and disadvantages of various sensing principles,including piezoresistive,capacitive,and self-powered mechanisms,and evalu-ates their application potential in health monitoring,robotics,wearable devices,smart prosthetics,and human-machine interaction.By systematically summarizing current research progress and technical challenges,this review aims to provide forward-looking insights into future research directions,driving the development of electronic skin technology to ultimately achieve tactile perception capabilities comparable to human skin.
基金Projects(50574091, 50774084) supported by the National Natural Science Foundation of ChinaProject(50921001) supported by the Innovative Research Group Science Foundation,ChinaProject supported by Jiangsu Scientific Researching Fund Project ("333" Project),China
文摘A new concept of banana vibrating screen which has the same effect as traditional banana vibrating screen in a new way was put forward.The dynamic model of vibrating screen was established and its working principle was analyzed when the action line of the exciting force did not act through the centroid of screen box.Moreover,the dynamic differential equations of centroid and screen surface were obtained.The motions of centroid and screen surface were simulated with actual parameters of the design example in Matlab/Simulink.The results show that not only the amplitude has a significant decrease from 9.38 to 4.10 mm,but also the throwing index and vibrating direction angle have a significant decrease from 10.49 to 4.59,and from 58.10° to 33.29°,respectively,along the screen surface,which indicates that motion characteristics of vibrating screen are consistent with those of traditional banana vibrating screen only by means of a single angle of screen surface.What's more,such banana vibrating screen of variable linear trajectory with greater processing capacity could be obtained by adjusting the relative position of force center and the centroid of screen box properly.
基金funding from National Natural Science Foundation of China(NSFC Nos.61774157,81771388,61874121,and 61874012)Beijing Natural Science Foundation(No.4182075)the Capital Science and Technology Conditions Platform Project(Project ID:Z181100009518014).
文摘Flexible tactile sensors have broad applications in human physiological monitoring,robotic operation and human-machine interaction.However,the research of wearable and flexible tactile sensors with high sensitivity,wide sensing range and ability to detect three-dimensional(3D)force is still very challenging.Herein,a flexible tactile electronic skin sensor based on carbon nanotubes(CNTs)/polydimethylsiloxane(PDMS)nanocomposites is presented for 3D contact force detection.The 3D forces were acquired from combination of four specially designed cells in a sensing element.Contributed from the double-sided rough porous structure and specific surface morphology of nanocomposites,the piezoresistive sensor possesses high sensitivity of 12.1 kPa?1 within the range of 600 Pa and 0.68 kPa?1 in the regime exceeding 1 kPa for normal pressure,as well as 59.9 N?1 in the scope of<0.05 N and>2.3 N?1 in the region of<0.6 N for tangential force with ultra-low response time of 3.1 ms.In addition,multi-functional detection in human body monitoring was employed with single sensing cell and the sensor array was integrated into a robotic arm for objects grasping control,indicating the capacities in intelligent robot applications.
基金supported by National Natural Science Foundation of China (Grant No. 50575192)Hebei Provincial Natural Science Foundation of China (Grant No. E2007000349)
文摘The six-component force/torque sensor has become one kind of the most important sensors with the ability of measuring all the external forces and torques. A novel hyperstatic six-component force/torque sensor based on the Stewart platform structure, which can be used for the force measurement of the robot wrist, is proposed, and its structural optimal design, finite element analysis and calibration experimentation is presented. The characteristic of the sensor structure is analyzed in comparison with the traditional Stewart platform-based sensor. The mathematical expression of the sensor＇s force mapping matrix is introduced. The condition number and generalized amplifying coefficient defined by singular values of force Jacobian matrix are used to evaluate the performances of isotropy and sensitivity of the sensor respectively. The optimal design of the sensor structure is performed with the objective of achieving high measurement sensitivity and good isotropy. The sensor prototype is fabricated, and the static and dynamic characteristics of the sensor are analyzed with finite element analysis software package ANSYS. The calibration device is manufactured, and the data acquisition and processing system is developed. The theoretical and experimental study of the static calibration of the sensor prototype is carried out. The results of simulation analysis and calibration experimentation prove the feasibility of the hyperstatic sensor structure, and the contents of this paper possess theoretical significance and engineering value for the further research and practical application of the six-component force sensor.
基金supported by the Open Foundation of Graduate Innovation Base(Laboratory)of Nanjing University of Aeronautics and Astronautics (No.kfjj20170512)the National Natural Science Foundation of China(No. 51175263)
文摘A six-axis force sensor with parallel 8/4-4 structure is introduced and its measurement principle is analyzed.Based on condition numbers of Jacobian matrix spectral norm of the sensor,the relationship between the force and moment isotropy and some structural parameters is deduced.Orthogonal test methods are used to determine the degree of primary and secondary factors that have significant effect on sensor characteristics.Furthermore,the relationship between each performance index and the structural parameters of the sensor is analyzed by the method of the atlas,which lays a foundation for structural optimization design of the force sensor.
基金This project is supported by National Hi-tech Research and Development Program of China(863 Program,No.2001AAA423300)Provincial Natural Science Foundation of Anhui,China(No.00043310)
文摘Robot＇s dynamic motion error and on-line compensation based on multi-axis force sensor are dealt with.It is revealed that the reasons of the error are formed and the relations of the error are delivered.A motion equation of robot＇s termination with the error is established,and then,an error matrix and an error compensation matrix of the motion equation are also defined.An on-line error＇s compensation method is put forward to decrease the displacement error,which is a degree of millimeter,shown by the result of simulation of PUMA562 robot.
基金Supported by the National Natural Science Foundation ofChina (60537050)
文摘The development of the sensor suitable for measuring large load stress to the anchor cable becomes an important task in bridge construction and maintenance. Therefore, a new type of optical fiber sensor was developed in the laboratory - optical fiber grating sensor for force measurement of anchor cable （OFBFMAC）. No similar report about this kind of sensor has been found up to now in China and other countries. This sensor is proved to be an effective way of monitoring in processes of anchor cable installation, cable cutting, cable force regulation, etc, with the accurate and repeatable measuring results. Its successful application in the tie bar cable force safety monitoring for Wuhan Qingchuan bridge is a new exploration of optical fiber grating sensing technology in bridge tie bar monitoring system.
基金Supported by the National Natural Science Foundation of China （ No. 60275032 ） and the Supported bv the High Technology Research and Development Programme of China （ No. 2003AA404220）.
文摘This paper presents a new designed miniature six DOF （degree of freedom） force/torque sensor. This sensor is fully integrated with a micro DSP （digital signal processor）, so all the signal conditioning, A/D, decoupling, digital-signals serial output are performed in the sensor. Some experimental results are presented to demonstrate the capability of the proposed design. Finally, a neural network was used for decoupling the interacting signals, compared with the conventional method using the inverse matrix, this new method is more accurate.
文摘The aim of this work is to model and analyze the behavior of a new smart nano force sensor.To do so,the carbon nanotube has been used as a suspended gate of a metal-oxide-semiconductor field-effect transistor(MOSFET).The variation of the applied force on the carbon nanotube(CNT)generates a variation of the capacity of the transistor oxide-gate and therefore the variation of the threshold voltage,which allows the MOSFET to become a capacitive nano force sensor.The sensitivity of the nano force sensor can reach 0.12431V/nN.This sensitivity is greater than results in the literature.We have found through this study that the response of the sensor depends strongly on the geometric and physical parameters of the CNT.From the results obtained in this study,it can be seen that the increase in the applied force increases the value of the MOSFET threshold voltage VTh.In this paper,we first used artificial neural networks to faithfully reproduce the response of the nano force sensor model.This neural model is called direct model.Then,secondly,we designed an inverse model called an intelligent sensor which allows linearization of the response of our developed force sensor.
基金the National Key Technologies R&D Program(No.2016YFC0105604)the National Natural Science Foundation of China(No.61474107).
文摘In the surgery of lumbar disc herniation(LDH),the nerve root retractor is used to pull the nerve root to prevent damage.The traditional medical nerve root retractor cannot quantify the force on the nerve root.In order to improve the nerve root retractor,this paper proposes an intraoperative lumbar neurological force monitoring system.The core module of this system is the improved nerve root retractor equipped with the high density flexible pressure sensor array.The high density microneedle array and multiple pressure detection units are used in the pressure sensor to realise sensitive pressure monitoring in a narrow surgical operation area.The sensing area is 4 mm×17 mm,including 6 detection units.The sensitivity of sensor is 67.30%/N in the range of 0-5 N.This system is used for in vitro animal experiments,which can continuously detect pressure.
基金supported by the Fundation of Graduate Innovation Center in Nanjing University of Aeronautics and Astronautics(No.kfjj20190308)the Fundamental Research Funds for the Central Universities
文摘This paper presents the isotropic optimization of a Stewart-type six-component force sensor. First,the static model of the sensor is built by the screw theory and the forward isotropy indexes and the inverse isotropy indexes are further presented. Second,a comprehensive evaluation function is established to evaluate the isotropic performance of the sensor. By compromising all the isotropy indexes and solving the extreme value of the function,the sensor optimization process is completed and an optimal solution of a set of sensor structure parameters is obtained. Finally,the design of the components and the assembly of the prototype are established by 3D modeling software Pro-E. The verification of the isotropic performance of the sensor is conducted by the finite element analysis software ANSYS. The results obtained by our research can provide useful reference to the isotropic performance evaluation and structure design of the stewart-type six-component force sensor.
文摘Compression force sensors are indispensable to tactile sensors in humanoid robots. We are investigating the application of low-cost electrically conducting rubber sheets to force sensors, of which the biggest problem is its poor reproducibility. We have found that the deposition of aluminum by a vacuum evaporation method shows such an excellent characteristic that the sensor can be used in a wide range under 10.33 N/cm2. In this article, we investigated time response of the sensors and also studied how the radiation heating during the vacuum evaporation process for Al deposition affected their sensing property. We found that the radiation heating induces deterioration from the point of view of standard deviation of the output voltage of the sensors at a transient region. We convince that a low-temperature Al deposition method should be developed to form electrodes on the electrical conducting rubber sensors.
文摘Tactile sensors are believed to be a key element in order to realize robotic fingers to catch a fragile object without damage. Force sensitive conductive rubber is a low-cost material and then attractive for the application to tactile sensors. We have studied the effect of electrodes attached to the rubber sheets. We have tried four kinds of electrodes: vacuum deposited Al, adhesive Cu tape, Al thin film sheet and silver paste. It can be concluded that vacuum deposited Al has the highest potential from the practical point of view;it has the widest dynamic range and good precision at the same time.
基金National Hi-tech Research and Development Program of China(863 Program,No.2001AA42330).
文摘Negative step response experimental method is used in wrist force sensor＇s dynamic performance calibration. The exciting manner of negative step response method is the same as wrist force sensor＇s load in working. This experimental method needn＇t special experiment equipments. Experiment＇s dynamic repeatability is good. So wrist force sensor＇s dynamic performance is suitable to be calibrated by negative step response method. A new correlation wavelet transfer method is studied. By wavelet transfer method, the signal is decomposed into two dimensional spaces of time-frequency. So the problem of negative step exciting energy concentrating in the low frequency band is solved. Correlation wavelet transfer doesn＇t require that wavelet primary function be orthogonal and needn＇t wavelet reconstruction. So analyzing efficiency is high. An experimental bench is designed and manufactured to load the wrist force sensor orthogonal excitation force/moment. A piezoelectric force sensor is used to setup soft trigger and calculate the value of negative step excitation. A wrist force sensor is calibrated. The pulse response function is calculated after negative step excitation and step response have been transformed to positive step excitation and step response. The pulse response function is transferred to frequency response function. The wrist force sensor＇s dynamic characteristics are identified by the frequency response function.
基金Supported by the National Natural Science Foundation of China(No.51505124)the Natural Science Foundation of Hebei Province(No.E2016209312)the Foster Fund Projects of North China University of Science and Technology(No.JP201505)
文摘In order to adapt to the specific task, the six-axis dynamic contact force between end-effectors of intelligent robots and working condition needs to be perceived. Therefore, the dynamic property of six-axis force sensor which is installed on the end-effectors of intelligent robots will have influence on the veracity of detection and judgment to working environment contact force by intelligent robots directly. In this paper, dynamic analysis to double-layer and pre-stressed multi-limb six-axis force sensor is conducted. First, the structure of the sensor is introduced, and the limb number is confirmed by introducing the related definitions of convex analysis. Then, based on vibration of multiple-degree-of-freedom system, a mechanical vibration simplified model of double-layer and pre-stressed multiple limb six-axis force sensor is set up. After that, movement differential equations of sensor and the response of analytical expression are deduced, and the movement differential equations is solved. Finally, taking the double-layer and pre-stressed seven limb six-axis force sensor as an example, numerical calculation and simulation of deriving result is conducted, which verify the correctness and feasibility of the theoretical analysis.
文摘Compressive force sensors or pressure sensors are indispensable to tactile sensors in humanoid robots. It is investigated that low-cost electro-conducting rubber sheets are applied to the force sensor, of which the biggest problem is its poor reproducibility. It was found that the aluminum deposition by a vacuum evaporation method shows excellent characteristics but suffers deterioration by a radiation heating effect. The aluminum electrode was deposited by a sputtering method, known to have an advantage of a low-temperature method, and the reproducibility of the output was improved.
基金Supported by Natural Science Foundation of China(U1713210).
文摘Haptic interaction plays an important role in the virtual reality technology,which let a person not only view the 3D virtual environment but also realistically touch the virtual environment.As a key part of haptic interaction,force feedback has become an essential function for the haptic interaction.Therefore,multi-dimensional force sensors are widely used in the fields of virtual reality and augmented reality.In this paper,some conventional multi-dimensional force sensors based on different measurement principles,such as resistive,capacitive,piezoelectric,are briefly introduced.Then the mechanical structures of the elastic body of multi-dimensional force sensors are reviewed.It is obvious that the performance of the multi-dimensional force sensor is mainly dependent upon the mechanical structure of elastic body.Furthermore,the calibration process of the force sensor is analyzed,and problems in calibration are discussed.Interdimensional coupling error is one of the main factors affecting the measurement precision of the multi-dimensional force sensors.Therefore,reducing or even eliminating dimensional coupling error becomes a fundamental requirement in the design of multi-dimensional force sensors,and the decoupling state-of-art of the multi-dimensional force sensors are introduced in this paper.At last,the trends and current challenges of multi-dimensional force sensing technology are proposed.
