It has been confirmed that glass-forming ability （GFA） of supercooled liquids is related to not only liquid phase stability but also the crystallization resistance. In this paper, it is found that the liquid region ...It has been confirmed that glass-forming ability （GFA） of supercooled liquids is related to not only liquid phase stability but also the crystallization resistance. In this paper, it is found that the liquid region interval （T1 - Tg） characterized by the normalized parameter of Tg/T1 could reflect the stability of glass-forming liquids at the equilibrium state, whilst the normalization of supercooled liquid region △Tx=（Tx - Tg）, i.e. △Tx/Tx （wherein T1 is the liquidus temperature, Tg the glass transition temperature, and Tx the onset crystallization temperature） could indicate the crystallization resistance during glass formation. Thus, a new parameter, defined as ζ = Tg/T1＋△Tx/Tx is established to predict the GFA of supercooled liquids. In comparison with other commonly used criteria, this parameter demonstrates a better statistical correlation with the GFA for various glass-forming systems including metallic glasses, oxide glasses and cryoprotectants.展开更多
Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the ...Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the patient to the treatment regimen as well as the system’s ability to adhere to skin during the therapy so as to promote drug penetration through the skin barrier.Conventional formulations for topical and dermatological administration of drugs have certain limitations like poor adherence to skin, poor permeability and compromised patient compliance.For the treatment of diseases of body tissues and wounds, the drug has to be maintained at the site of treatment for an effective period of time. Topical film forming systems are such developing drug delivery systems meant for topical application to the skin, which adhere to the body, forming a thin transparent film and provide delivery of the active ingredients to the body tissue. These are intended for skin application as emollient or protective and for local action or transdermal penetration of medicament for systemic action. The transparency is an appreciable feature of this polymeric system which greatly influences the patient acceptance.In the current discussion, the film forming systems are described as a promising choice for topical and transdermal drug delivery. Further the various types of film forming systems (sprays/solutions, gels and emulsions) along with their evaluation parameters have also been reviewed.展开更多
A formula was proposed to calculate the distribution of metal ions quantitatively in chemical reaction system forming hydroxide where precipitation and complex are formed together. The effects of some factors on forma...A formula was proposed to calculate the distribution of metal ions quantitatively in chemical reaction system forming hydroxide where precipitation and complex are formed together. The effects of some factors on formation of precipitation and complex were investigated, and the corresponding precipitation rates of zinc, iron （III）, aluminum, copper and magnesium were calculated. As a result, it shows that the proposed formula is reliable. By the proposed formula, the existence state of metal ions in hydroxides reaction system with any metal ions can be well described and the effects of some factors on the distribution of metal ions were determined.展开更多
A method based on the semi-empirical Miedema model and a geometrical model was used to study the glass forming abili-ties （GFA） and the amorphous forming ranges of Al-Fe-Nd-Zr system and its constituent ternary syst...A method based on the semi-empirical Miedema model and a geometrical model was used to study the glass forming abili-ties （GFA） and the amorphous forming ranges of Al-Fe-Nd-Zr system and its constituent ternary systems. The amorphous forming composition ranges were analyzed based on different criteria such asΔGam-ss and PHSS （PHSS=ΔHchem （ΔSC/R）（ΔSσ/R）） for Al-Fe-Nd system. The predicted amorphous forming range was in good agreement with the experimental results. The results showed that the criterion ofΔGam-ss was more accurate, and agreed well with the experiment results. The Gibbs free energy differenceΔGam-ss and pa-rameter PHSS were then used to predict the amorphous forming composition range for the rest of the constitutive ternary systems of Al-Fe-Nd-Zr. In addition, the amorphous forming composition ranges of the （Al-Fe-Zr）100-xNdx （x=50, 60, 70） systems were predicted byΔGam-ss and the modified parameter PHSS. The Gibbs free energy of Al10（Fe1-xZrx）30Nd60 were also calculated. The GFA parameter PHSS indicated that the composition with the highest GFA was Al33.5Fe13.5Zr3Nd50 for the （Al-Fe-Zr）50Nd50 system, Al28.8Fe10Zr1.2Nd60 for the （Al-Fe-Zr）40Nd60 system and Al22.8Fe6.9Zr0.3Nd70 for the （Al-Fe-Zr）30Nd70 system, and the results suggested that those alloys with high content of Al had higher GFA. The appropriate content of neodymium and zirconium resulted in the lower value of PHSS and increased the GFA obviously.展开更多
The three dimensional variable cross-section roll forming is a kind of new metal forming technol- ogy which combines large forming force, multi-axis linkage movement and space synergic movement, and the sequential syn...The three dimensional variable cross-section roll forming is a kind of new metal forming technol- ogy which combines large forming force, multi-axis linkage movement and space synergic movement, and the sequential synergic movement of the ganged roller group is used to complete the metal sheet forming according to the shape of the complicated and variable forming part data. The control system should meet the demands of quick response to the test requirements of the product part. A new kind of real time data driving multi-axis linkage and synergic movement control strategy of 3D roll forming is put forward in the paper. In the new control strategy, the forming data are automatically generated according to the shape of the parts, and the multi-axis linkage movement together with cooperative motion among the six stands of the 3D roll forming machine is driven by the real-time information, and the control nodes are also driven by the forming data. The new control strategy is applied to a 48 axis 3D roll forming machine developed by our research center, and the control servo period is less than 10ms. A forming experiment of variable cross section part is carried out, and the forming preci- sion is better than ＋ 0.5mm by the control strategy. The result of the experiment proves that the control strategy has significant potentiality for the development of 3D roll forming production line with large scale, multi-axis ganged and svner^ic movement展开更多
The thermodynamic model of multicomponent chemical short range order (MCSRO) was established in order to evaluate the glass forming ability (GFA) of ternary alloys. Comprehensive numerical calculations using MSCRO sof...The thermodynamic model of multicomponent chemical short range order (MCSRO) was established in order to evaluate the glass forming ability (GFA) of ternary alloys. Comprehensive numerical calculations using MSCRO software were conducted to obtain the composition dependence of the MCSRO undercooling in Zr Ni Cu, Zr Si Cu and Pd Si Cu ternary systems. By the MCSRO undercooling principle, the composition range of Zr Ni Cu system with optimum GFA is determined to be 62.5 ～ 75 Zr, 5～ 20 Cu, 12.5 ～ 25 Ni ( n (Ni)/ n (Cu)=1～5). The TTT curves of Zr Ni Cu system were also calculated based on the MCSRO model. The critical cooling rates for Zr based alloy with deep MSCRO undercooling are estimated to be as low as 100?K/s, which is consistent with the practical cooling rate in the preparation of Zr based bulk metallic glass (BMG). The calculation also illustrates that the easy glass forming systems such as Pd based alloys exhibit an extraordinary deep MCSRO undercooling. It is shown that the thermodynamic model of MCSRO provides an effective method for the alloy designing of BMG.展开更多
A comparison research about the implicit and explicit solutions of sheet forming simulation was presented. On the platform of Autoform and Ls dyna3D, a dynamic forming simulation of a sideframe, of Santana 2000 was do...A comparison research about the implicit and explicit solutions of sheet forming simulation was presented. On the platform of Autoform and Ls dyna3D, a dynamic forming simulation of a sideframe, of Santana 2000 was done, and the engineering strain, the thickness distribution and the FLD between the two softwares were compared. It indicates that their results coincide with each other very much and the areas of the wrinkle and failure are the same roughly. Further, the characteristics of the two softwares in geometric model and preprocessing of the finite element were discussed and the questions which need attention provided.展开更多
The China-Iceland joint Arctic observatory(CIAO)has formally been operating since October 18,2018,and an imaging riometer system was deployed at CIAO in August 2019 for the conjunction observation purpose with the co-...The China-Iceland joint Arctic observatory(CIAO)has formally been operating since October 18,2018,and an imaging riometer system was deployed at CIAO in August 2019 for the conjunction observation purpose with the co-located ground-based all sky imager auroral observation system.The features of the riometer and antenna system are presented.The riometer’s beam-forming performance were evaluated with the analysis method introduced in detail.The analysis results showed that the mapping of beams was incorrectly ordered,and the correction has been made.The revised ordering result was reasonably verified and the analysis method was proved to be effective.展开更多
A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which ca...A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.展开更多
The carcass layer is the innermost structure of flexible marine risers and is responsible for resisting external pressure.It has an“S”section with a spiral interlocking feature.After the multi-pass roll forming of a...The carcass layer is the innermost structure of flexible marine risers and is responsible for resisting external pressure.It has an“S”section with a spiral interlocking feature.After the multi-pass roll forming of a flat steel strip,a carcass layer is formed by lock forming.During roll forming,the steel strip undergoes significant plastic deformation,and its local area accumulates residual stress owing to multiple loading and unloading cycles.These phenomena complicate the design and analysis of the carcass layer multi-pass roll forming(CLMRF)process and cause issues in the carcass layer during manufacturing,such as strip fracture and low forming quality.Thus,herein,CLMRF was investigated to clarify the stress distribution,and a parameter analysis was performed.First,the CLMRF process was designed on the basis of classical roll-forming design theory.Second,a finite element model was established,and CLMRF was simulated.Third,the distributions of the forming stress and residual stress of the strip during CLMRF were investigated.Finally,the influences of the strip thickness,roll gap,roll distance,and angular increment were investigated.The conclusions of this study can be used to provide technical guidance in the manufacturing of flexible risers.展开更多
Spiral bevel gears are critical transmission components,and are widely used in the aerospace field.This paper proposes a new multi-DOF envelope forming process for fabricating spiral bevel gears.Firstly,the multi-DOF ...Spiral bevel gears are critical transmission components,and are widely used in the aerospace field.This paper proposes a new multi-DOF envelope forming process for fabricating spiral bevel gears.Firstly,the multi-DOF envelope forming principle of spiral bevel gears is proposed.Secondly,the design methods for the envelope tool geometry and movement are proposed based on the envelope geometry and movement relationships.Thirdly,the metal flow and tooth filling laws are revealed through 3D FE simulation of the multi-DOF envelope forming process of a typical spiral bevel gear.Fourthly,a new method for separating the envelope tool and the formed spiral bevel gear with back taper tooth is proposed to avoid their interference.Finally,experiments on multi-DOF envelope forming of this typical spiral bevel gear are conducted using new heavy load multi-DOF envelope forming equipment.The simulation and experimental results show the feasibility of the proposed multi-DOF envelope forming process for fabricating spiral bevel gears with back taper tooth and the corresponding process design methods.展开更多
This article examines the influence of annealing temperature on fracture toughness and forming limit curves of dissimilar aluminum/silver sheets.In the cold roll bonding process,after brushing and acid washing,the pre...This article examines the influence of annealing temperature on fracture toughness and forming limit curves of dissimilar aluminum/silver sheets.In the cold roll bonding process,after brushing and acid washing,the prepared surfaces are placed on top of each other and by rolling with reduction more than 50%,the bonding between layers is established.In this research,the roll bonding process was done at room temperature,without the use of lubricants and with a 70%thickness reduction.Then,the final thickness of the Ag/Al bilayer sheet reached 350μm by several stages of cold rolling.Before cold rolling,it should be noted that to decrease the hardness created due to plastic deformation,the roll-bonded samples were subjected to annealing heat treatment at 400℃for 90 min.Thus,the final samples were annealed at 200,300 and 400℃for 90 min and cooled in a furnace to examine the annealing temperature effects.The uniaxial tensile and microhardness tests measured mechanical properties.Also,to investigate the fracture mechanism,the fractography of the cross-section was examined by scanning electron microscope(SEM).To evaluate the formability of Ag/Al bilayer sheets,forming limit curves were obtained experimentally through the Nakazima test.The resistance of composites to failure due to cracking was also investigated by fracture toughness.The results showed that annealing increases the elongation and formability of the Ag/Al bilayer sheet while reduces the ultimate tensile strength and fracture toughness.However,the changing trend is not the same at different temperatures,and according to the results,the most significant effect is obtained at 300℃and aluminum layers.It was also determined that by increasing annealing temperature,the fracture mechanism from shear ductile with small and shallow dimples becomes ductile with deep cavities.展开更多
To overcome the shortage of complex equipment,large volume,and high energy consumption in space capsule manufacturing,a novel sliding pressure Joule heat fuse additive manufacturing technique with reduced volume and l...To overcome the shortage of complex equipment,large volume,and high energy consumption in space capsule manufacturing,a novel sliding pressure Joule heat fuse additive manufacturing technique with reduced volume and low energy consumption was proposed.But the unreasonable process parameters may lead to the inferior consistency of the forming quality of single-channel multilayer in Joule heat additive manufacturing process,and it is difficult to reach the condition for forming thinwalled parts.Orthogonal experiments were designed to fabricate single-channel multilayer samples with varying numbers of layers,and their forming quality was evaluated.The influence of printing current,forming speed,and contact pressure on the forming quality of the single-channel multilayer was analyzed.The optimal process parameters were obtained and the quality characterization of the experiment results was conducted.Results show that the printing current has the most significant influence on the forming quality of the single-channel multilayer.Under the optimal process parameters,the forming section is well fused and the surface is continuously smooth.The surface roughness of a single-channel 3-layer sample is 0.16μm,and the average Vickers hardness of cross section fusion zone is 317 HV,which lays a foundation for the subsequent use of Joule heat additive manufacturing technique to form thinwall parts.展开更多
Short process forming techniques for brazing and soldering materials can shorten the process,improve product quality,and increase production efficiency,which has received much attention from welding researchers.This r...Short process forming techniques for brazing and soldering materials can shorten the process,improve product quality,and increase production efficiency,which has received much attention from welding researchers.This review mainly summarized the research reports on short process forming techniques for brazing and soldering materials.Firstly,the traditional process and its shortcomings were presented.Secondly,the latest research of short process forming technologies,such as continuous casting technique,atomization powder technique,solder ball forming technique,and rapid solidification technique,was summarized,and the traditional forming performance of several brazing and soldering materials was introduced.Finally,the current restrictions and research trends of short process forming technique for brazing and solder materials were put forward,providing theoretical guidance and reference for related research and technique development in brazing and soldering field.展开更多
Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser m...Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser melting.Their forming quality,compression mechanical properties,and degradation behavior were investigated.Results indicate that the fabricated scaffolds exhibit good dimensional accuracy,and the surface chemical polishing treatment significantly improves the forming quality and reduces porosity error in porous scaffolds.Compared to the ones with rod structures(bcc,RD),the scaffolds with surface structures(G,P)have less powder particle adhesion.The G porous scaffold exhibits the best forming quality for the same design porosity.The predominant failure mode of scaffolds during compression is a 45°shear fracture.At a porosity of 75%,the compression property of all scaffolds meets the compressive property requirements of cancellous bone,while bcc and G structures show relatively better compression property.After immersion in Hank's solution for 168 h,the B-2-75% pore structure scaffold exhibits severe localized corrosion,with fractures in partial pillar connections.In contrast,the G-3-75% pore structure scaffold mainly undergoes uniform corrosion,maintaining structural integrity,and its corrosion rate and loss of compressive properties are less than those of the B-2-75%structure.After comparison,the G-pore structure scaffold is preferred.展开更多
Most material distribution-based topology optimization methods work on a relaxed form of the optimization problem and then push the solution toward the binary limits.However,when benchmarking these methods,researchers...Most material distribution-based topology optimization methods work on a relaxed form of the optimization problem and then push the solution toward the binary limits.However,when benchmarking these methods,researchers use known solutions to only a single form of benchmark problem.This paper proposes a comparison platform for systematic benchmarking of topology optimization methods using both binary and relaxed forms.A greyness measure is implemented to evaluate how far a solution is from the desired binary form.The well-known ZhouRozvany(ZR)problem is selected as the benchmarking problem here,making use of available global solutions for both its relaxed and binary forms.The recently developed non-penalization Smooth-edged Material Distribution for Optimizing Topology(SEMDOT),well-established Solid Isotropic Material with Penalization(SIMP),and continuation methods are studied on this platform.Interestingly,in most cases,the grayscale solutions obtained by SEMDOT demonstrate better performance in dealing with the ZR problem than SIMP.The reasons are investigated and attributed to the usage of two different regularization techniques,namely,the Heaviside smooth function in SEMDOT and the power-law penalty in SIMP.More importantly,a simple-to-use benchmarking graph is proposed for evaluating newly developed topology optimization methods.展开更多
Obtaining zero springback and good post-form performance simultaneously is an ultimate pursuit in metal sheet forming.The stress-relaxation ageing(SRA)behavior and mechanical properties of a commercial 2219 aluminum a...Obtaining zero springback and good post-form performance simultaneously is an ultimate pursuit in metal sheet forming.The stress-relaxation ageing(SRA)behavior and mechanical properties of a commercial 2219 aluminum alloy largely pre-deformed(LPD)by 80%have been systematically investigated.The stress relaxation ratio of the LPD alloy reaches approximately 94%regardless of the initial stress(50–350 MPa)after ageing for 12 h at 140°C.This relaxation ratio is about 2.9 and 1.8 times that in the T4 tempered alloy(27.6%under 50 MPa and 31.5%under 150 MPa)and T3 tempered alloy(37.6%under 50 MPa and 51.2%under 150 MPa),respectively.The microstructures,comprised of GP zones/θ'precipitates plus dislocation tangles,and tensile properties in the stress-relaxation-aged LPD alloys remain basically invariant with different initial stresses,as is vital importance for property consistency at different locations of the formed part.Under the same SRA condition,the LPD alloy has an increase of 150–230 MPa in yield strength relative to T3/T4 tempered alloy and obtains a uniform elongation of about 8%.A simple dislocation-based constitutive model accurately describing stress relaxation enhanced by the high dislocation density is established and embedded in the finite element package through a user subroutine.Simulations and experimental verifications show the LPD alloy sheet parts exhibit a nearly zero springback(<5%)after unloading in contrast to the springback larger than 65%in the T3/T4 alloy sheet parts under the same condition.Our findings demonstrate the high-dislocation-density-enhanced SRA response enables a high-performance springback-free age forming of Al alloy sheet.展开更多
Economic globalization is a process of forming a global market under the conditions of technological progress and national opening-up.Influenced by factors such as national policies,the international environment and g...Economic globalization is a process of forming a global market under the conditions of technological progress and national opening-up.Influenced by factors such as national policies,the international environment and geopolitics,the values,concepts and choices of the participants of globalization will change accordingly,thus affecting the mode,scale and speed of globalization.展开更多
The northwestern margin of Junggar Basin is the region with the richest oil sand resources in China.For better understanding the enrichment rules and deployment of exploration and development of regional oil sand,it i...The northwestern margin of Junggar Basin is the region with the richest oil sand resources in China.For better understanding the enrichment rules and deployment of exploration and development of regional oil sand,it is of great scientific significance to study the accumulation conditions of oil sand in different strata and mining areas of the Junggar Basin.Through a large number of field investigations,drilling verification and sampling tests,it is found that the oil sand in the region covers an area of 2000 km^(2),with shallow and thick reservoir,and predicted resource of 180 million tons.The oil sand resources are mainly distributed in four geological strata,namely the Middle Triassic Karamay Formation,Early Jurassic Badaowan Formation,Late Jurassic Qigu Formation,and Early Cretaceous Qingshuihe Formation.The reservoir is mainly composed of sandstone with high porosity and permeability,and the reservoir space is mainly intergranular pores with a medium average oil content.The oil sand deposit in the region is a typical destructive oil reservoir.The crude oil in the oil sand layer is degraded and thickened from the deep to the shallow,the content of saturated hydrocarbon decreased,and the content of aromatic hydrocarbon,non-hydrocarbon and asphaltene increased.The oil source comes from the deep Permian hydrocarbon-generating depression.Unconformities,faults and marginal fan delta-braided river depositional systems constitute effective migration and storage systems.Caprocks of the Upper Triassic Baijiantan Formation,Lower Jurassic Sangonghe Formation and Lower Cretaceous Hutubihe Formation were formed by three large scale lake transgressions.The Indosinian,Yanshan and Late Yanshan movements are the main driving forces for the migration of deep oil and gas to the shallow edge to form oil sand deposits.It is considered that the oil sand in the northwestern margin of Junggar Basin is of a slope complex migration type.展开更多
1.Objective.The Yidun arc within the Tethys-Himalaya metallogenic belt formed during the westward subduction of the Ganzi-Litang Ocean(237-206 Ma)during the Indosinian period,and then underwent the evolution stages of...1.Objective.The Yidun arc within the Tethys-Himalaya metallogenic belt formed during the westward subduction of the Ganzi-Litang Ocean(237-206 Ma)during the Indosinian period,and then underwent the evolution stages of the collisional orogeny(206-138 Ma)and the post-collisional orogeny(135-75 Ma).In recent years,a series of large and medium-sized Late Yanshanian intracontinental porphyry-skarn Mo-Cu-W deposits have been discovered in the southern part of the Yidun arc,including Xiuwacu,Relin,Hongshan,Tongchanggou,and Donglufang(Fig.1a).展开更多
基金Project supported by National Science Council, Taiwan, China (Grant No NSC 94-2216-E-110-010)post-doc sponsorship from National Science Council, Taiwan, China (Grant No NSC 95-2816-E-110-001)
文摘It has been confirmed that glass-forming ability （GFA） of supercooled liquids is related to not only liquid phase stability but also the crystallization resistance. In this paper, it is found that the liquid region interval （T1 - Tg） characterized by the normalized parameter of Tg/T1 could reflect the stability of glass-forming liquids at the equilibrium state, whilst the normalization of supercooled liquid region △Tx=（Tx - Tg）, i.e. △Tx/Tx （wherein T1 is the liquidus temperature, Tg the glass transition temperature, and Tx the onset crystallization temperature） could indicate the crystallization resistance during glass formation. Thus, a new parameter, defined as ζ = Tg/T1＋△Tx/Tx is established to predict the GFA of supercooled liquids. In comparison with other commonly used criteria, this parameter demonstrates a better statistical correlation with the GFA for various glass-forming systems including metallic glasses, oxide glasses and cryoprotectants.
基金Vivekanand Education Society’s College of Pharmacy, Chembur, Mumbai, for their support and encouragement
文摘Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the patient to the treatment regimen as well as the system’s ability to adhere to skin during the therapy so as to promote drug penetration through the skin barrier.Conventional formulations for topical and dermatological administration of drugs have certain limitations like poor adherence to skin, poor permeability and compromised patient compliance.For the treatment of diseases of body tissues and wounds, the drug has to be maintained at the site of treatment for an effective period of time. Topical film forming systems are such developing drug delivery systems meant for topical application to the skin, which adhere to the body, forming a thin transparent film and provide delivery of the active ingredients to the body tissue. These are intended for skin application as emollient or protective and for local action or transdermal penetration of medicament for systemic action. The transparency is an appreciable feature of this polymeric system which greatly influences the patient acceptance.In the current discussion, the film forming systems are described as a promising choice for topical and transdermal drug delivery. Further the various types of film forming systems (sprays/solutions, gels and emulsions) along with their evaluation parameters have also been reviewed.
基金Project (51304047) supported by the National Natural Science Foundation of ChinaProject (20131037) supported by Science and Technology Foundation of Liaoning Province,China
文摘A formula was proposed to calculate the distribution of metal ions quantitatively in chemical reaction system forming hydroxide where precipitation and complex are formed together. The effects of some factors on formation of precipitation and complex were investigated, and the corresponding precipitation rates of zinc, iron （III）, aluminum, copper and magnesium were calculated. As a result, it shows that the proposed formula is reliable. By the proposed formula, the existence state of metal ions in hydroxides reaction system with any metal ions can be well described and the effects of some factors on the distribution of metal ions were determined.
基金Project supported by the National Natural Science Foundation of China(51061004)Science Foundation of Guangxi Education Department(2013YB377)
文摘A method based on the semi-empirical Miedema model and a geometrical model was used to study the glass forming abili-ties （GFA） and the amorphous forming ranges of Al-Fe-Nd-Zr system and its constituent ternary systems. The amorphous forming composition ranges were analyzed based on different criteria such asΔGam-ss and PHSS （PHSS=ΔHchem （ΔSC/R）（ΔSσ/R）） for Al-Fe-Nd system. The predicted amorphous forming range was in good agreement with the experimental results. The results showed that the criterion ofΔGam-ss was more accurate, and agreed well with the experiment results. The Gibbs free energy differenceΔGam-ss and pa-rameter PHSS were then used to predict the amorphous forming composition range for the rest of the constitutive ternary systems of Al-Fe-Nd-Zr. In addition, the amorphous forming composition ranges of the （Al-Fe-Zr）100-xNdx （x=50, 60, 70） systems were predicted byΔGam-ss and the modified parameter PHSS. The Gibbs free energy of Al10（Fe1-xZrx）30Nd60 were also calculated. The GFA parameter PHSS indicated that the composition with the highest GFA was Al33.5Fe13.5Zr3Nd50 for the （Al-Fe-Zr）50Nd50 system, Al28.8Fe10Zr1.2Nd60 for the （Al-Fe-Zr）40Nd60 system and Al22.8Fe6.9Zr0.3Nd70 for the （Al-Fe-Zr）30Nd70 system, and the results suggested that those alloys with high content of Al had higher GFA. The appropriate content of neodymium and zirconium resulted in the lower value of PHSS and increased the GFA obviously.
基金Supported by National Key Technology R&D Program(No.2011BAG03B03)
文摘The three dimensional variable cross-section roll forming is a kind of new metal forming technol- ogy which combines large forming force, multi-axis linkage movement and space synergic movement, and the sequential synergic movement of the ganged roller group is used to complete the metal sheet forming according to the shape of the complicated and variable forming part data. The control system should meet the demands of quick response to the test requirements of the product part. A new kind of real time data driving multi-axis linkage and synergic movement control strategy of 3D roll forming is put forward in the paper. In the new control strategy, the forming data are automatically generated according to the shape of the parts, and the multi-axis linkage movement together with cooperative motion among the six stands of the 3D roll forming machine is driven by the real-time information, and the control nodes are also driven by the forming data. The new control strategy is applied to a 48 axis 3D roll forming machine developed by our research center, and the control servo period is less than 10ms. A forming experiment of variable cross section part is carried out, and the forming preci- sion is better than ＋ 0.5mm by the control strategy. The result of the experiment proves that the control strategy has significant potentiality for the development of 3D roll forming production line with large scale, multi-axis ganged and svner^ic movement
文摘The thermodynamic model of multicomponent chemical short range order (MCSRO) was established in order to evaluate the glass forming ability (GFA) of ternary alloys. Comprehensive numerical calculations using MSCRO software were conducted to obtain the composition dependence of the MCSRO undercooling in Zr Ni Cu, Zr Si Cu and Pd Si Cu ternary systems. By the MCSRO undercooling principle, the composition range of Zr Ni Cu system with optimum GFA is determined to be 62.5 ～ 75 Zr, 5～ 20 Cu, 12.5 ～ 25 Ni ( n (Ni)/ n (Cu)=1～5). The TTT curves of Zr Ni Cu system were also calculated based on the MCSRO model. The critical cooling rates for Zr based alloy with deep MSCRO undercooling are estimated to be as low as 100?K/s, which is consistent with the practical cooling rate in the preparation of Zr based bulk metallic glass (BMG). The calculation also illustrates that the easy glass forming systems such as Pd based alloys exhibit an extraordinary deep MCSRO undercooling. It is shown that the thermodynamic model of MCSRO provides an effective method for the alloy designing of BMG.
文摘A comparison research about the implicit and explicit solutions of sheet forming simulation was presented. On the platform of Autoform and Ls dyna3D, a dynamic forming simulation of a sideframe, of Santana 2000 was done, and the engineering strain, the thickness distribution and the FLD between the two softwares were compared. It indicates that their results coincide with each other very much and the areas of the wrinkle and failure are the same roughly. Further, the characteristics of the two softwares in geometric model and preprocessing of the finite element were discussed and the questions which need attention provided.
基金supported by the National Key R&D Program of China(Grant no.2018YFF01013706)the National Natural Science Foundation of China(Grant no.41874195)the International Cooperation on Key Scientific Issues in the International Meridian Circle(Grant no.A131901W14).
文摘The China-Iceland joint Arctic observatory(CIAO)has formally been operating since October 18,2018,and an imaging riometer system was deployed at CIAO in August 2019 for the conjunction observation purpose with the co-located ground-based all sky imager auroral observation system.The features of the riometer and antenna system are presented.The riometer’s beam-forming performance were evaluated with the analysis method introduced in detail.The analysis results showed that the mapping of beams was incorrectly ordered,and the correction has been made.The revised ordering result was reasonably verified and the analysis method was proved to be effective.
基金supported in part by financial support from the National Key R&D Program of China(No.2023YFB3407003)the National Natural Science Foundation of China(No.52375378).
文摘A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.U1906233 and 52201312)Dalian High-Level Talent Innovation Program(Grant No.2021RD16)the Natural Science Foundation of Liaoning Province of China(Grant No.2023-BSBA-052).
文摘The carcass layer is the innermost structure of flexible marine risers and is responsible for resisting external pressure.It has an“S”section with a spiral interlocking feature.After the multi-pass roll forming of a flat steel strip,a carcass layer is formed by lock forming.During roll forming,the steel strip undergoes significant plastic deformation,and its local area accumulates residual stress owing to multiple loading and unloading cycles.These phenomena complicate the design and analysis of the carcass layer multi-pass roll forming(CLMRF)process and cause issues in the carcass layer during manufacturing,such as strip fracture and low forming quality.Thus,herein,CLMRF was investigated to clarify the stress distribution,and a parameter analysis was performed.First,the CLMRF process was designed on the basis of classical roll-forming design theory.Second,a finite element model was established,and CLMRF was simulated.Third,the distributions of the forming stress and residual stress of the strip during CLMRF were investigated.Finally,the influences of the strip thickness,roll gap,roll distance,and angular increment were investigated.The conclusions of this study can be used to provide technical guidance in the manufacturing of flexible risers.
基金the National Science and Technology Major Project of China(No.2019-VII0017e0158)the National Natural Science Foundation of China(No.U21A20131)+1 种基金the Industry-University Research Cooperation Project,China(No.HFZL2020CXY025)the National Key Laboratory of Science and Technology on Helicopter Transmission,China(No.HTL-O-21G05).
文摘Spiral bevel gears are critical transmission components,and are widely used in the aerospace field.This paper proposes a new multi-DOF envelope forming process for fabricating spiral bevel gears.Firstly,the multi-DOF envelope forming principle of spiral bevel gears is proposed.Secondly,the design methods for the envelope tool geometry and movement are proposed based on the envelope geometry and movement relationships.Thirdly,the metal flow and tooth filling laws are revealed through 3D FE simulation of the multi-DOF envelope forming process of a typical spiral bevel gear.Fourthly,a new method for separating the envelope tool and the formed spiral bevel gear with back taper tooth is proposed to avoid their interference.Finally,experiments on multi-DOF envelope forming of this typical spiral bevel gear are conducted using new heavy load multi-DOF envelope forming equipment.The simulation and experimental results show the feasibility of the proposed multi-DOF envelope forming process for fabricating spiral bevel gears with back taper tooth and the corresponding process design methods.
基金Project(4013311)supported by the National Science Foundation of Iran(INSF)。
文摘This article examines the influence of annealing temperature on fracture toughness and forming limit curves of dissimilar aluminum/silver sheets.In the cold roll bonding process,after brushing and acid washing,the prepared surfaces are placed on top of each other and by rolling with reduction more than 50%,the bonding between layers is established.In this research,the roll bonding process was done at room temperature,without the use of lubricants and with a 70%thickness reduction.Then,the final thickness of the Ag/Al bilayer sheet reached 350μm by several stages of cold rolling.Before cold rolling,it should be noted that to decrease the hardness created due to plastic deformation,the roll-bonded samples were subjected to annealing heat treatment at 400℃for 90 min.Thus,the final samples were annealed at 200,300 and 400℃for 90 min and cooled in a furnace to examine the annealing temperature effects.The uniaxial tensile and microhardness tests measured mechanical properties.Also,to investigate the fracture mechanism,the fractography of the cross-section was examined by scanning electron microscope(SEM).To evaluate the formability of Ag/Al bilayer sheets,forming limit curves were obtained experimentally through the Nakazima test.The resistance of composites to failure due to cracking was also investigated by fracture toughness.The results showed that annealing increases the elongation and formability of the Ag/Al bilayer sheet while reduces the ultimate tensile strength and fracture toughness.However,the changing trend is not the same at different temperatures,and according to the results,the most significant effect is obtained at 300℃and aluminum layers.It was also determined that by increasing annealing temperature,the fracture mechanism from shear ductile with small and shallow dimples becomes ductile with deep cavities.
基金Shaanxi Province Qin Chuangyuan“Scientist+Engineer”Team Construction Project(2022KXJ-071)2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project(2022JH-ZHFHTS-0012)+1 种基金Shaanxi Province Key Research and Development Plan-“Two Chains”Integration Key Project-Qin Chuangyuan General Window Industrial Cluster Project(2023QCY-LL-02)Xixian New Area Science and Technology Plan(2022-YXYJ-003,2022-XXCY-010)。
文摘To overcome the shortage of complex equipment,large volume,and high energy consumption in space capsule manufacturing,a novel sliding pressure Joule heat fuse additive manufacturing technique with reduced volume and low energy consumption was proposed.But the unreasonable process parameters may lead to the inferior consistency of the forming quality of single-channel multilayer in Joule heat additive manufacturing process,and it is difficult to reach the condition for forming thinwalled parts.Orthogonal experiments were designed to fabricate single-channel multilayer samples with varying numbers of layers,and their forming quality was evaluated.The influence of printing current,forming speed,and contact pressure on the forming quality of the single-channel multilayer was analyzed.The optimal process parameters were obtained and the quality characterization of the experiment results was conducted.Results show that the printing current has the most significant influence on the forming quality of the single-channel multilayer.Under the optimal process parameters,the forming section is well fused and the surface is continuously smooth.The surface roughness of a single-channel 3-layer sample is 0.16μm,and the average Vickers hardness of cross section fusion zone is 317 HV,which lays a foundation for the subsequent use of Joule heat additive manufacturing technique to form thinwall parts.
基金National Key Research and Development Program(2021YFB3401101)。
文摘Short process forming techniques for brazing and soldering materials can shorten the process,improve product quality,and increase production efficiency,which has received much attention from welding researchers.This review mainly summarized the research reports on short process forming techniques for brazing and soldering materials.Firstly,the traditional process and its shortcomings were presented.Secondly,the latest research of short process forming technologies,such as continuous casting technique,atomization powder technique,solder ball forming technique,and rapid solidification technique,was summarized,and the traditional forming performance of several brazing and soldering materials was introduced.Finally,the current restrictions and research trends of short process forming technique for brazing and solder materials were put forward,providing theoretical guidance and reference for related research and technique development in brazing and soldering field.
基金Science and Technology Planning Project of Inner Mongolia Science and Technology Department(2022YFSH0021)Key Research and Development Program of Shaanxi Province(2024SF2-GJHX-14,2021SF-296)。
文摘Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser melting.Their forming quality,compression mechanical properties,and degradation behavior were investigated.Results indicate that the fabricated scaffolds exhibit good dimensional accuracy,and the surface chemical polishing treatment significantly improves the forming quality and reduces porosity error in porous scaffolds.Compared to the ones with rod structures(bcc,RD),the scaffolds with surface structures(G,P)have less powder particle adhesion.The G porous scaffold exhibits the best forming quality for the same design porosity.The predominant failure mode of scaffolds during compression is a 45°shear fracture.At a porosity of 75%,the compression property of all scaffolds meets the compressive property requirements of cancellous bone,while bcc and G structures show relatively better compression property.After immersion in Hank's solution for 168 h,the B-2-75% pore structure scaffold exhibits severe localized corrosion,with fractures in partial pillar connections.In contrast,the G-3-75% pore structure scaffold mainly undergoes uniform corrosion,maintaining structural integrity,and its corrosion rate and loss of compressive properties are less than those of the B-2-75%structure.After comparison,the G-pore structure scaffold is preferred.
文摘Most material distribution-based topology optimization methods work on a relaxed form of the optimization problem and then push the solution toward the binary limits.However,when benchmarking these methods,researchers use known solutions to only a single form of benchmark problem.This paper proposes a comparison platform for systematic benchmarking of topology optimization methods using both binary and relaxed forms.A greyness measure is implemented to evaluate how far a solution is from the desired binary form.The well-known ZhouRozvany(ZR)problem is selected as the benchmarking problem here,making use of available global solutions for both its relaxed and binary forms.The recently developed non-penalization Smooth-edged Material Distribution for Optimizing Topology(SEMDOT),well-established Solid Isotropic Material with Penalization(SIMP),and continuation methods are studied on this platform.Interestingly,in most cases,the grayscale solutions obtained by SEMDOT demonstrate better performance in dealing with the ZR problem than SIMP.The reasons are investigated and attributed to the usage of two different regularization techniques,namely,the Heaviside smooth function in SEMDOT and the power-law penalty in SIMP.More importantly,a simple-to-use benchmarking graph is proposed for evaluating newly developed topology optimization methods.
基金financially supported by the National Natural Science Foundation of China(Nos.52274404,52305441,and U22A20190)the Natural Science Foundation of Hunan province(Nos.2022JJ20065 and 2023JJ40739)+1 种基金the Science and Technology Innovation Program of Hunan Province(No.2022RC1001)the National Key R&D Program of China(No.2021YFB3400903).
文摘Obtaining zero springback and good post-form performance simultaneously is an ultimate pursuit in metal sheet forming.The stress-relaxation ageing(SRA)behavior and mechanical properties of a commercial 2219 aluminum alloy largely pre-deformed(LPD)by 80%have been systematically investigated.The stress relaxation ratio of the LPD alloy reaches approximately 94%regardless of the initial stress(50–350 MPa)after ageing for 12 h at 140°C.This relaxation ratio is about 2.9 and 1.8 times that in the T4 tempered alloy(27.6%under 50 MPa and 31.5%under 150 MPa)and T3 tempered alloy(37.6%under 50 MPa and 51.2%under 150 MPa),respectively.The microstructures,comprised of GP zones/θ'precipitates plus dislocation tangles,and tensile properties in the stress-relaxation-aged LPD alloys remain basically invariant with different initial stresses,as is vital importance for property consistency at different locations of the formed part.Under the same SRA condition,the LPD alloy has an increase of 150–230 MPa in yield strength relative to T3/T4 tempered alloy and obtains a uniform elongation of about 8%.A simple dislocation-based constitutive model accurately describing stress relaxation enhanced by the high dislocation density is established and embedded in the finite element package through a user subroutine.Simulations and experimental verifications show the LPD alloy sheet parts exhibit a nearly zero springback(<5%)after unloading in contrast to the springback larger than 65%in the T3/T4 alloy sheet parts under the same condition.Our findings demonstrate the high-dislocation-density-enhanced SRA response enables a high-performance springback-free age forming of Al alloy sheet.
文摘Economic globalization is a process of forming a global market under the conditions of technological progress and national opening-up.Influenced by factors such as national policies,the international environment and geopolitics,the values,concepts and choices of the participants of globalization will change accordingly,thus affecting the mode,scale and speed of globalization.
基金granted by the Xinjiang Geological Exploration Fund。
文摘The northwestern margin of Junggar Basin is the region with the richest oil sand resources in China.For better understanding the enrichment rules and deployment of exploration and development of regional oil sand,it is of great scientific significance to study the accumulation conditions of oil sand in different strata and mining areas of the Junggar Basin.Through a large number of field investigations,drilling verification and sampling tests,it is found that the oil sand in the region covers an area of 2000 km^(2),with shallow and thick reservoir,and predicted resource of 180 million tons.The oil sand resources are mainly distributed in four geological strata,namely the Middle Triassic Karamay Formation,Early Jurassic Badaowan Formation,Late Jurassic Qigu Formation,and Early Cretaceous Qingshuihe Formation.The reservoir is mainly composed of sandstone with high porosity and permeability,and the reservoir space is mainly intergranular pores with a medium average oil content.The oil sand deposit in the region is a typical destructive oil reservoir.The crude oil in the oil sand layer is degraded and thickened from the deep to the shallow,the content of saturated hydrocarbon decreased,and the content of aromatic hydrocarbon,non-hydrocarbon and asphaltene increased.The oil source comes from the deep Permian hydrocarbon-generating depression.Unconformities,faults and marginal fan delta-braided river depositional systems constitute effective migration and storage systems.Caprocks of the Upper Triassic Baijiantan Formation,Lower Jurassic Sangonghe Formation and Lower Cretaceous Hutubihe Formation were formed by three large scale lake transgressions.The Indosinian,Yanshan and Late Yanshan movements are the main driving forces for the migration of deep oil and gas to the shallow edge to form oil sand deposits.It is considered that the oil sand in the northwestern margin of Junggar Basin is of a slope complex migration type.
基金jointly supported by the Selection Project of High-level Scientific and Technological Talents and Innovative Teams Project in Yunnan Province(202305AT350004-4)the National Natural Science Foundation of China(42362010 and 42464005)+3 种基金the Field Scientific Observation and Research Station of Mountain Agroecosystem in the Lower Reaches of Nujiang River,Yunnan Province(202305AM340031)the Yunnan Provincial Department of Education Science Research Fund Project(2025J0983)the Wen Bang-chun Academician Workstation in Yunnan Province(202205AF150032)the Undergraduate Innovative Training Program(2310603235).
文摘1.Objective.The Yidun arc within the Tethys-Himalaya metallogenic belt formed during the westward subduction of the Ganzi-Litang Ocean(237-206 Ma)during the Indosinian period,and then underwent the evolution stages of the collisional orogeny(206-138 Ma)and the post-collisional orogeny(135-75 Ma).In recent years,a series of large and medium-sized Late Yanshanian intracontinental porphyry-skarn Mo-Cu-W deposits have been discovered in the southern part of the Yidun arc,including Xiuwacu,Relin,Hongshan,Tongchanggou,and Donglufang(Fig.1a).
