To achieve more precise monitoring of state fluctuations in the power network close to renewable energy sources, it is necessary to utilize phasor measurements and shorten the time interval between state estimations. ...To achieve more precise monitoring of state fluctuations in the power network close to renewable energy sources, it is necessary to utilize phasor measurements and shorten the time interval between state estimations. For large-scale power systems, however, estimating all of their states with shorter time intervals means a drastic increase in computational burden. As a tradeoff between accuracy and computational efficiency, a multi-time interval forecasting-aided state estimation approach is proposed in this paper, where states with various degrees of fluctuations are estimated asynchronously with different time intervals. Based on the newest state estimate, forecasting-aided state estimators are employed to predict states at time moments prior to the next round of measurement update and state estimation. Extensive numerical tests have demonstrated the effectiveness of the proposed approach.展开更多
With the development of the smart grid,the distribution system operation conditions become more complex and changeable.Furthermore,due to the influence of observation outliers and uncertain noise statistics,it is more...With the development of the smart grid,the distribution system operation conditions become more complex and changeable.Furthermore,due to the influence of observation outliers and uncertain noise statistics,it is more difficult to grasp the dynamic operation characteristics of distribution system.In order to address these problems,by using projection statistics and the noise covariance updating technology based on the Sage-Husa noise estimator,for distribution power system with outliers and uncertain noise statistics,a robust adaptive cubature Kalman filter forecasting-aided state estimation method is proposed based on generalized-maximum likelihood type estimator.Furthermore,an adaptive strategy,which can enhance the filtering accuracy under normal conditions,is presented.In the simulation part,the branch parameters and node load parameters of the test system are appropriately modified to simulate the asymmetry of the three-phase branch parameters and the asymmetry of the three-phase loads.Finally,through simulation experiments on the improved test system,it is verified that the robust forecasting-aided state estimation method,presented in this paper,can effectively perceive the actual operating state of the distribution network in different simulation scenarios.展开更多
Dear Editor,The letter deals with the distributed state and fault estimation of the whole physical layer for cyber-physical systems(CPSs) when the cyber layer suffers from DoS attacks. With the advancement of embedded...Dear Editor,The letter deals with the distributed state and fault estimation of the whole physical layer for cyber-physical systems(CPSs) when the cyber layer suffers from DoS attacks. With the advancement of embedded computing, communication and related hardware technologies, CPSs have attracted extensive attention and have been widely used in power system, traffic network, refrigeration system and other fields.展开更多
Dear Editor,This letter focuses on how an attacker can design suitable improved zero-dynamics (ZD) attack signal based on state estimates of target system. Improved ZD attack is to change zero dynamic gain matrix of a...Dear Editor,This letter focuses on how an attacker can design suitable improved zero-dynamics (ZD) attack signal based on state estimates of target system. Improved ZD attack is to change zero dynamic gain matrix of attack signal to a matrix with determinant greater than 1.展开更多
For target tracking and localization in bearing-only sensor network,it is an essential and significant challenge to solve the problem of plug-and-play expansion while stably enhancing the accuracy of state estimation....For target tracking and localization in bearing-only sensor network,it is an essential and significant challenge to solve the problem of plug-and-play expansion while stably enhancing the accuracy of state estimation.This paper pro-poses a distributed state estimation method based on two-layer factor graph.Firstly,the measurement model of the bearing-only sensor network is constructed,and by investigating the observ-ability and the Cramer-Rao lower bound of the system model,the preconditions are analyzed.Subsequently,the location fac-tor graph and cubature information filtering algorithm of sensor node pairs are proposed for localized estimation.Building upon this foundation,the mechanism for propagating confidence mes-sages within the fusion factor graph is designed,and is extended to the entire sensor network to achieve global state estimation.Finally,groups of simulation experiments are con-ducted to compare and analyze the results,which verifies the rationality,effectiveness,and superiority of the proposed method.展开更多
Quantum phase estimation reveals the power of quantum resources to beat the standard quantum limit and has been widely used in many fields.To improve the precision of phase estimation,we discuss the optimal probe stat...Quantum phase estimation reveals the power of quantum resources to beat the standard quantum limit and has been widely used in many fields.To improve the precision of phase estimation,we discuss the optimal probe states for phase estimation with a fixed mean particle number.By searching for the maximum quantum Fisher information,we optimize the probe states,which are superior to the path-entangled Fock states.Comparing the mean particle number(n)with the dimension of the probe states in Fock space(N+1),when n≤N,our optimal probe states can provide a better performance than the n00n states.When n>N,our optimal probe states can also remain optimal if the dimension of the probe states is large enough.展开更多
With the continuous expansion of the power system scale and the increasing complexity of operational mode,the interaction between transmission and distribution systems is becoming more and more significant,placing hig...With the continuous expansion of the power system scale and the increasing complexity of operational mode,the interaction between transmission and distribution systems is becoming more and more significant,placing higher requirements on the accuracy and efficiency of the power system state estimation to address the challenge of balancing computational efficiency and estimation accuracy in traditional coupled transmission and distribution state estimation methods,this paper proposes a collaborative state estimation method based on distribution systems state clustering and load model parameter identification.To resolve the scalability issue of coupled transmission and distribution power systems,clustering is first carried out based on the distribution system states.As the data and models of the transmission system and distribution systems are not shared.For the transmission system,equating the power transmitted from the transmission system to the distribution system is the same as equating the distribution system.Further,the power transmitted from the transmission system to different types of distribution systems is equivalent to different polynomial equivalent load models.Then,a parameter identification method is proposed to obtain the parameters of the equivalent load model.Finally,a transmission and distribution collaborative state estimation model is constructed based on the equivalent load model.The results of the numerical analysis show that compared with the traditional master-slave splitting method,the proposed method significantly enhances computational efficiency while maintaining high estimation accuracy.展开更多
Accurate capacity and State of Charge(SOC)estimation are crucial for ensuring the safety and longevity of lithium-ion batteries in electric vehicles.This study examines ten machine learning architectures,Including Dee...Accurate capacity and State of Charge(SOC)estimation are crucial for ensuring the safety and longevity of lithium-ion batteries in electric vehicles.This study examines ten machine learning architectures,Including Deep Belief Network(DBN),Bidirectional Recurrent Neural Network(BiDirRNN),Gated Recurrent Unit(GRU),and others using the NASA B0005 dataset of 591,458 instances.Results indicate that DBN excels in capacity estimation,achieving orders-of-magnitude lower error values and explaining over 99.97%of the predicted variable’s variance.When computational efficiency is paramount,the Deep Neural Network(DNN)offers a strong alternative,delivering near-competitive accuracy with significantly reduced prediction times.The GRU achieves the best overall performance for SOC estimation,attaining an R^(2) of 0.9999,while the BiDirRNN provides a marginally lower error at a slightly higher computational speed.In contrast,Convolutional Neural Networks(CNN)and Radial Basis Function Networks(RBFN)exhibit relatively high error rates,making them less viable for real-world battery management.Analyses of error distributions reveal that the top-performing models cluster most predictions within tight bounds,limiting the risk of overcharging or deep discharging.These findings highlight the trade-off between accuracy and computational overhead,offering valuable guidance for battery management system(BMS)designers seeking optimal performance under constrained resources.Future work may further explore advanced data augmentation and domain adaptation techniques to enhance these models’robustness in diverse operating conditions.展开更多
The state estimation of the flexible multibody systems is a vital issue since it is the base of effective control and condition monitoring.The research on the state estimation method of flexible multibody system with ...The state estimation of the flexible multibody systems is a vital issue since it is the base of effective control and condition monitoring.The research on the state estimation method of flexible multibody system with large deformation and large rotation remains rare.In this investigation,a state estimator based on multiple nonlinear Kalman filtering algorithms was designed for the flexible multibody systems containing large flexibility components that were discretized by absolute nodal coordinate formulation(ANCF).The state variable vector was constructed based on the independent coordinates which are identified through the constraint Jacobian.Three types of Kalman filters were used to compare their performance in the state estimation for ANCF.Three cases including flexible planar rotating beam,flexible four-bar mechanism,and flexible rotating shaft were employed to verify the proposed state estimator.According to the different performances of the three types of Kalman filter,suggestions were given for the construction of the state estimator for the flexible multibody system.展开更多
This paper aims to enhance the array Beamforming(BF) robustness by tackling issues related to BF weight state estimation encountered in Constant Modulus Blind Beamforming(CMBB). To achieve this, we introduce a novel a...This paper aims to enhance the array Beamforming(BF) robustness by tackling issues related to BF weight state estimation encountered in Constant Modulus Blind Beamforming(CMBB). To achieve this, we introduce a novel approach that incorporates an L1-regularizer term in BF weight state estimation. We start by explaining the CMBB formation mechanism under conditions where there is a mismatch in the far-field signal model. Subsequently, we reformulate the BF weight state estimation challenge using a method known as variable-splitting, turning it into a noise minimization problem. This problem combines both linear and nonlinear quadratic terms with an L1-regularizer that promotes the sparsity. The optimization strategy is based on a variable-splitting method, implemented using the Alternating Direction Method of Multipliers(ADMM). Furthermore, a variable-splitting framework is developed to enhance BF weight state estimation, employing a Kalman Smoother(KS) optimization algorithm. The approach integrates the Rauch-TungStriebel smoother to perform posterior-smoothing state estimation by leveraging prior data. We provide proof of convergence for both linear and nonlinear CMBB state estimation technology using the variable-splitting KS and the iterated extended Kalman smoother. Simulations corroborate our theoretical analysis, showing that the proposed method achieves robust stability and effective convergence, even when faced with signal model mismatches.展开更多
Gaussian assumptions of non-Gaussian noises hinder the improvement of state estimation accuracy.In this paper,an asymmetric generalized Gaussian distribution(AGGD),as a unified representation of various unimodal distr...Gaussian assumptions of non-Gaussian noises hinder the improvement of state estimation accuracy.In this paper,an asymmetric generalized Gaussian distribution(AGGD),as a unified representation of various unimodal distributions,is applied to formulate the non-Gaussian forecasting-aided state estimation problem.To address the problem,an improved particle filter is proposed,which integrates a near-optimal AGGD proposal function and an AGGD sampling method into the typical particle filter.The AGGD proposal function can approximate the target distribution of state variables to greatly alleviate particle degeneracy and promote precise estimation,through considering both state transitions and latest measurements.For rapid particle generation from the AGGD proposal function,an efficient inverse cumulative distribution function(CDF)sampling method is employed based on the derived approximation of inverse CDF of AGGD.Numerical simulations are carried out on a modified balanced IEEE 123-bus test system.The results validate that the proposed method outperforms other popular state estimation methods in terms of accuracy and robustness,whether in Gaussian,non-Gaussian,or abnormal measurement errors.展开更多
Accurate and efficient online parameter identification and state estimation are crucial for leveraging digital twin simulations to optimize the operation of near-carbon-free nuclear energy systems.In previous studies,...Accurate and efficient online parameter identification and state estimation are crucial for leveraging digital twin simulations to optimize the operation of near-carbon-free nuclear energy systems.In previous studies,we developed a reactor operation digital twin(RODT).However,non-differentiabilities and discontinuities arise when employing machine learning-based surrogate forward models,challenging traditional gradient-based inverse methods and their variants.This study investigated deterministic and metaheuristic algorithms and developed hybrid algorithms to address these issues.An efficient modular RODT software framework that incorporates these methods into its post-evaluation module is presented for comprehensive comparison.The methods were rigorously assessed based on convergence profiles,stability with respect to noise,and computational performance.The numerical results show that the hybrid KNNLHS algorithm excels in real-time online applications,balancing accuracy and efficiency with a prediction error rate of only 1%and processing times of less than 0.1 s.Contrastingly,algorithms such as FSA,DE,and ADE,although slightly slower(approximately 1 s),demonstrated higher accuracy with a 0.3%relative L_2 error,which advances RODT methodologies to harness machine learning and system modeling for improved reactor monitoring,systematic diagnosis of off-normal events,and lifetime management strategies.The developed modular software and novel optimization methods presented offer pathways to realize the full potential of RODT for transforming energy engineering practices.展开更多
With the development of unmanned driving technology,intelligent robots and drones,high-precision localization,navigation and state estimation technologies have also made great progress.Traditional global navigation sa...With the development of unmanned driving technology,intelligent robots and drones,high-precision localization,navigation and state estimation technologies have also made great progress.Traditional global navigation satellite system/inertial navigation system(GNSS/INS)integrated navigation systems can provide high-precision navigation information continuously.However,when this system is applied to indoor or GNSS-denied environments,such as outdoor substations with strong electromagnetic interference and complex dense spaces,it is often unable to obtain high-precision GNSS positioning data.The positioning and orientation errors will diverge and accumulate rapidly,which cannot meet the high-precision localization requirements in large-scale and long-distance navigation scenarios.This paper proposes a method of high-precision state estimation with fusion of GNSS/INS/Vision using a nonlinear optimizer factor graph optimization as the basis for multi-source optimization.Through the collected experimental data and simulation results,this system shows good performance in the indoor environment and the environment with partial GNSS signal loss.展开更多
A fast-charging policy is widely employed to alleviate the inconvenience caused by the extended charging time of electric vehicles. However, fast charging exacerbates battery degradation and shortens battery lifespan....A fast-charging policy is widely employed to alleviate the inconvenience caused by the extended charging time of electric vehicles. However, fast charging exacerbates battery degradation and shortens battery lifespan. In addition, there is still a lack of tailored health estimations for fast-charging batteries;most existing methods are applicable at lower charging rates. This paper proposes a novel method for estimating the health of lithium-ion batteries, which is tailored for multi-stage constant current-constant voltage fast-charging policies. Initially, short charging segments are extracted by monitoring current switches,followed by deriving voltage sequences using interpolation techniques. Subsequently, a graph generation layer is used to transform the voltage sequence into graphical data. Furthermore, the integration of a graph convolution network with a long short-term memory network enables the extraction of information related to inter-node message transmission, capturing the key local and temporal features during the battery degradation process. Finally, this method is confirmed by utilizing aging data from 185 cells and 81 distinct fast-charging policies. The 4-minute charging duration achieves a balance between high accuracy in estimating battery state of health and low data requirements, with mean absolute errors and root mean square errors of 0.34% and 0.66%, respectively.展开更多
This paper investigates the anomaly-resistant decentralized state estimation(SE) problem for a class of wide-area power systems which are divided into several non-overlapping areas connected through transmission lines...This paper investigates the anomaly-resistant decentralized state estimation(SE) problem for a class of wide-area power systems which are divided into several non-overlapping areas connected through transmission lines. Two classes of measurements(i.e., local measurements and edge measurements) are obtained, respectively, from the individual area and the transmission lines. A decentralized state estimator, whose performance is resistant against measurement with anomalies, is designed based on the minimum error entropy with fiducial points(MEEF) criterion. Specifically, 1) An augmented model, which incorporates the local prediction and local measurement, is developed by resorting to the unscented transformation approach and the statistical linearization approach;2) Using the augmented model, an MEEF-based cost function is designed that reflects the local prediction errors of the state and the measurement;and 3) The local estimate is first obtained by minimizing the MEEF-based cost function through a fixed-point iteration and then updated by using the edge measuring information. Finally, simulation experiments with three scenarios are carried out on the IEEE 14-bus system to illustrate the validity of the proposed anomaly-resistant decentralized SE scheme.展开更多
This study investigated the problems of non-cooperative target recognition and relative motion estimation during spacecraft rendezvous maneuvers.A structure integrating an Inertial Measurement Unit(IMU)and a visual ca...This study investigated the problems of non-cooperative target recognition and relative motion estimation during spacecraft rendezvous maneuvers.A structure integrating an Inertial Measurement Unit(IMU)and a visual camera was presented.The angular velocity output of the IMU was used to calculate the motion trajectories of star points in multiple image frames,which can highlight the motion of non-cooperative targets with respect to the image background to improve the probability of target recognition.To solve the problem of target misidentification caused by new star points entering the field of view,a target-tracking link based on IMU prediction was introduced to track the position of the target in the image.Furthermore,a measurement model was constructed using the line-of-sight vector generated from target recognition,and the relative motion state was estimated using a Huber-based non-linear filter.Semi-physical and numerical simulations were performed to evaluate the effectiveness and efficiency of the proposed method.展开更多
The estimation of quantum phase differences plays an important role in quantum simulation and quantum computation,yet existing quantum phase estimation algorithms face critical limitations in noisy intermediate-scale ...The estimation of quantum phase differences plays an important role in quantum simulation and quantum computation,yet existing quantum phase estimation algorithms face critical limitations in noisy intermediate-scale quantum(NISQ)devices due to their excessive depth and circuit complexity.We demonstrate a high-precision phase difference estimation protocol based on the Bayesian phase difference estimation algorithm and single-photon projective measurement.The iterative framework of the algorithm,combined with the independence from controlled unitary operations,inherently mitigates circuit depth and complexity limitations.Through an experimental realization on the photonic system,we demonstrate high-precision estimation of diverse phase differences,showing root-mean-square errors(RMSE)below the standard quantum limit𝒪(1/√N)and reaching the Heisenberg scaling𝒪(1/N)after a certain number of iterations.Our scheme provides a critical advantage in quantum resource-constrained scenarios,and advances practical implementations of quantum information tasks under realistic hardware constraints.展开更多
A spacecraft attitude estimation method based on electromagnetic vector sensors(EMVS)array is proposed,which employs the orthogonally constrained parallel factor(PARAFAC)algorithm and makes use of measurements of the ...A spacecraft attitude estimation method based on electromagnetic vector sensors(EMVS)array is proposed,which employs the orthogonally constrained parallel factor(PARAFAC)algorithm and makes use of measurements of the two-dimensional direction-of-arrival(2D-DOA)and polarization angles,aiming to address the issues of incomplete,asynchronous,and inaccurate third-party reference used for attitude estimation in spacecraft docking missions by employing the electromagnetic wave’s three-dimensional(3D)wave structure as a complete third-party reference.Comparative analysis with state-ofthe-art algorithms shows significant improvements in estimation accuracy and computational efficiency with this algorithm.Numerical simulations have verified the effectiveness and superiority of this method.A high-precision,reliable,and cost-effective method for rapid spacecraft attitude estimation is provided in this paper.展开更多
Dear Editor,Health management is essential to ensure battery performance and safety, while data-driven learning system is a promising solution to enable efficient state of health(SoH) estimation of lithium-ion(Liion) ...Dear Editor,Health management is essential to ensure battery performance and safety, while data-driven learning system is a promising solution to enable efficient state of health(SoH) estimation of lithium-ion(Liion) batteries. However, the time-consuming signal data acquisition and the lack of interpretability of model still hinder its efficient deployment. Motivated by this, this letter proposes a novel and interpretable data-driven learning strategy through combining the benefits of explainable AI and non-destructive ultrasonic detection for battery SoH estimation. Specifically, after equipping battery with advanced ultrasonic sensor to promise fast real-time ultrasonic signal measurement, an interpretable data-driven learning strategy named generalized additive neural decision ensemble(GANDE) is designed to rapidly estimate battery SoH and explain the effects of the involved ultrasonic features of interest.展开更多
In many engineering networks, only a part of target state variables are required to be estimated.On the other hand,multi-layer complex network exists widely in practical situations.In this paper, the state estimation ...In many engineering networks, only a part of target state variables are required to be estimated.On the other hand,multi-layer complex network exists widely in practical situations.In this paper, the state estimation of target state variables in multi-layer complex dynamical networks with nonlinear node dynamics is studied.A suitable functional state observer is constructed with the limited measurement.The parameters of the designed functional observer are obtained from the algebraic method and the stability of the functional observer is proven by the Lyapunov theorem.Some necessary conditions that need to be satisfied for the design of the functional state observer are obtained.Different from previous studies, in the multi-layer complex dynamical network with nonlinear node dynamics, the proposed method can estimate the state of target variables on some layers directly instead of estimating all the individual states.Thus, it can greatly reduce the placement of observers and computational cost.Numerical simulations with the three-layer complex dynamical network composed of three-dimensional nonlinear dynamical nodes are developed to verify the effectiveness of the method.展开更多
基金supported in part by the National Natural Science Foundation of China(No.51977115).
文摘To achieve more precise monitoring of state fluctuations in the power network close to renewable energy sources, it is necessary to utilize phasor measurements and shorten the time interval between state estimations. For large-scale power systems, however, estimating all of their states with shorter time intervals means a drastic increase in computational burden. As a tradeoff between accuracy and computational efficiency, a multi-time interval forecasting-aided state estimation approach is proposed in this paper, where states with various degrees of fluctuations are estimated asynchronously with different time intervals. Based on the newest state estimate, forecasting-aided state estimators are employed to predict states at time moments prior to the next round of measurement update and state estimation. Extensive numerical tests have demonstrated the effectiveness of the proposed approach.
基金partially supported by the National Natural Science Foundation of China under Grant 62073121partially supported by National Natural Science Foundation of China-State Grid Joint Fund for Smart Grid under Grant U1966202partially supported by Six Talent Peaks High Level Project of Jiangsu Province under Grant 2017-XNY-004.
文摘With the development of the smart grid,the distribution system operation conditions become more complex and changeable.Furthermore,due to the influence of observation outliers and uncertain noise statistics,it is more difficult to grasp the dynamic operation characteristics of distribution system.In order to address these problems,by using projection statistics and the noise covariance updating technology based on the Sage-Husa noise estimator,for distribution power system with outliers and uncertain noise statistics,a robust adaptive cubature Kalman filter forecasting-aided state estimation method is proposed based on generalized-maximum likelihood type estimator.Furthermore,an adaptive strategy,which can enhance the filtering accuracy under normal conditions,is presented.In the simulation part,the branch parameters and node load parameters of the test system are appropriately modified to simulate the asymmetry of the three-phase branch parameters and the asymmetry of the three-phase loads.Finally,through simulation experiments on the improved test system,it is verified that the robust forecasting-aided state estimation method,presented in this paper,can effectively perceive the actual operating state of the distribution network in different simulation scenarios.
基金supported by the National Natural Science Foundation of China(62303273,62373226)the National Research Foundation,Singapore through the Medium Sized Center for Advanced Robotics Technology Innovation(WP2.7)
文摘Dear Editor,The letter deals with the distributed state and fault estimation of the whole physical layer for cyber-physical systems(CPSs) when the cyber layer suffers from DoS attacks. With the advancement of embedded computing, communication and related hardware technologies, CPSs have attracted extensive attention and have been widely used in power system, traffic network, refrigeration system and other fields.
基金supported in part by the National Natural Science Foundation of China(61873106,62303109)Start-Up Research Fund of Southeast University(RF1028623002)Shenzhen Science and Technology Program(JCYJ20230807114609019)
文摘Dear Editor,This letter focuses on how an attacker can design suitable improved zero-dynamics (ZD) attack signal based on state estimates of target system. Improved ZD attack is to change zero dynamic gain matrix of attack signal to a matrix with determinant greater than 1.
基金supported by the National Natural Science Foundation of China(62176214).
文摘For target tracking and localization in bearing-only sensor network,it is an essential and significant challenge to solve the problem of plug-and-play expansion while stably enhancing the accuracy of state estimation.This paper pro-poses a distributed state estimation method based on two-layer factor graph.Firstly,the measurement model of the bearing-only sensor network is constructed,and by investigating the observ-ability and the Cramer-Rao lower bound of the system model,the preconditions are analyzed.Subsequently,the location fac-tor graph and cubature information filtering algorithm of sensor node pairs are proposed for localized estimation.Building upon this foundation,the mechanism for propagating confidence mes-sages within the fusion factor graph is designed,and is extended to the entire sensor network to achieve global state estimation.Finally,groups of simulation experiments are con-ducted to compare and analyze the results,which verifies the rationality,effectiveness,and superiority of the proposed method.
基金supported by the National Natural Science Foundation of China(Grant No.12405026)the Natural Science Foundation of Hangzhou(Grant No.2024SZRYBA050001)。
文摘Quantum phase estimation reveals the power of quantum resources to beat the standard quantum limit and has been widely used in many fields.To improve the precision of phase estimation,we discuss the optimal probe states for phase estimation with a fixed mean particle number.By searching for the maximum quantum Fisher information,we optimize the probe states,which are superior to the path-entangled Fock states.Comparing the mean particle number(n)with the dimension of the probe states in Fock space(N+1),when n≤N,our optimal probe states can provide a better performance than the n00n states.When n>N,our optimal probe states can also remain optimal if the dimension of the probe states is large enough.
基金State Grid Jiangsu Electric Power Co.,Ltd.Technology Project(J2023121).
文摘With the continuous expansion of the power system scale and the increasing complexity of operational mode,the interaction between transmission and distribution systems is becoming more and more significant,placing higher requirements on the accuracy and efficiency of the power system state estimation to address the challenge of balancing computational efficiency and estimation accuracy in traditional coupled transmission and distribution state estimation methods,this paper proposes a collaborative state estimation method based on distribution systems state clustering and load model parameter identification.To resolve the scalability issue of coupled transmission and distribution power systems,clustering is first carried out based on the distribution system states.As the data and models of the transmission system and distribution systems are not shared.For the transmission system,equating the power transmitted from the transmission system to the distribution system is the same as equating the distribution system.Further,the power transmitted from the transmission system to different types of distribution systems is equivalent to different polynomial equivalent load models.Then,a parameter identification method is proposed to obtain the parameters of the equivalent load model.Finally,a transmission and distribution collaborative state estimation model is constructed based on the equivalent load model.The results of the numerical analysis show that compared with the traditional master-slave splitting method,the proposed method significantly enhances computational efficiency while maintaining high estimation accuracy.
文摘Accurate capacity and State of Charge(SOC)estimation are crucial for ensuring the safety and longevity of lithium-ion batteries in electric vehicles.This study examines ten machine learning architectures,Including Deep Belief Network(DBN),Bidirectional Recurrent Neural Network(BiDirRNN),Gated Recurrent Unit(GRU),and others using the NASA B0005 dataset of 591,458 instances.Results indicate that DBN excels in capacity estimation,achieving orders-of-magnitude lower error values and explaining over 99.97%of the predicted variable’s variance.When computational efficiency is paramount,the Deep Neural Network(DNN)offers a strong alternative,delivering near-competitive accuracy with significantly reduced prediction times.The GRU achieves the best overall performance for SOC estimation,attaining an R^(2) of 0.9999,while the BiDirRNN provides a marginally lower error at a slightly higher computational speed.In contrast,Convolutional Neural Networks(CNN)and Radial Basis Function Networks(RBFN)exhibit relatively high error rates,making them less viable for real-world battery management.Analyses of error distributions reveal that the top-performing models cluster most predictions within tight bounds,limiting the risk of overcharging or deep discharging.These findings highlight the trade-off between accuracy and computational overhead,offering valuable guidance for battery management system(BMS)designers seeking optimal performance under constrained resources.Future work may further explore advanced data augmentation and domain adaptation techniques to enhance these models’robustness in diverse operating conditions.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272123 and 12302047)the Natural Science Foundation of Jiangsu Province(Grant No.BK20231185)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.SJCX24_0192).
文摘The state estimation of the flexible multibody systems is a vital issue since it is the base of effective control and condition monitoring.The research on the state estimation method of flexible multibody system with large deformation and large rotation remains rare.In this investigation,a state estimator based on multiple nonlinear Kalman filtering algorithms was designed for the flexible multibody systems containing large flexibility components that were discretized by absolute nodal coordinate formulation(ANCF).The state variable vector was constructed based on the independent coordinates which are identified through the constraint Jacobian.Three types of Kalman filters were used to compare their performance in the state estimation for ANCF.Three cases including flexible planar rotating beam,flexible four-bar mechanism,and flexible rotating shaft were employed to verify the proposed state estimator.According to the different performances of the three types of Kalman filter,suggestions were given for the construction of the state estimator for the flexible multibody system.
基金supported in Natural Science Foundation of Shandong Province,China(ZR2013FM018)。
文摘This paper aims to enhance the array Beamforming(BF) robustness by tackling issues related to BF weight state estimation encountered in Constant Modulus Blind Beamforming(CMBB). To achieve this, we introduce a novel approach that incorporates an L1-regularizer term in BF weight state estimation. We start by explaining the CMBB formation mechanism under conditions where there is a mismatch in the far-field signal model. Subsequently, we reformulate the BF weight state estimation challenge using a method known as variable-splitting, turning it into a noise minimization problem. This problem combines both linear and nonlinear quadratic terms with an L1-regularizer that promotes the sparsity. The optimization strategy is based on a variable-splitting method, implemented using the Alternating Direction Method of Multipliers(ADMM). Furthermore, a variable-splitting framework is developed to enhance BF weight state estimation, employing a Kalman Smoother(KS) optimization algorithm. The approach integrates the Rauch-TungStriebel smoother to perform posterior-smoothing state estimation by leveraging prior data. We provide proof of convergence for both linear and nonlinear CMBB state estimation technology using the variable-splitting KS and the iterated extended Kalman smoother. Simulations corroborate our theoretical analysis, showing that the proposed method achieves robust stability and effective convergence, even when faced with signal model mismatches.
基金supported by the National Key Research and Development Program of China(No.2016YFB0900100)the Key Project of Shanghai Science and Technology Committee(No.18DZ1100303)。
文摘Gaussian assumptions of non-Gaussian noises hinder the improvement of state estimation accuracy.In this paper,an asymmetric generalized Gaussian distribution(AGGD),as a unified representation of various unimodal distributions,is applied to formulate the non-Gaussian forecasting-aided state estimation problem.To address the problem,an improved particle filter is proposed,which integrates a near-optimal AGGD proposal function and an AGGD sampling method into the typical particle filter.The AGGD proposal function can approximate the target distribution of state variables to greatly alleviate particle degeneracy and promote precise estimation,through considering both state transitions and latest measurements.For rapid particle generation from the AGGD proposal function,an efficient inverse cumulative distribution function(CDF)sampling method is employed based on the derived approximation of inverse CDF of AGGD.Numerical simulations are carried out on a modified balanced IEEE 123-bus test system.The results validate that the proposed method outperforms other popular state estimation methods in terms of accuracy and robustness,whether in Gaussian,non-Gaussian,or abnormal measurement errors.
基金supported by the Natural Science Foundation of Shanghai(No.23ZR1429300)Innovation Funds of CNNC(Lingchuang Fund,Contract No.CNNC-LCKY-202234)the Project of the Nuclear Power Technology Innovation Center of Science Technology and Industry(No.HDLCXZX-2023-HD-039-02)。
文摘Accurate and efficient online parameter identification and state estimation are crucial for leveraging digital twin simulations to optimize the operation of near-carbon-free nuclear energy systems.In previous studies,we developed a reactor operation digital twin(RODT).However,non-differentiabilities and discontinuities arise when employing machine learning-based surrogate forward models,challenging traditional gradient-based inverse methods and their variants.This study investigated deterministic and metaheuristic algorithms and developed hybrid algorithms to address these issues.An efficient modular RODT software framework that incorporates these methods into its post-evaluation module is presented for comprehensive comparison.The methods were rigorously assessed based on convergence profiles,stability with respect to noise,and computational performance.The numerical results show that the hybrid KNNLHS algorithm excels in real-time online applications,balancing accuracy and efficiency with a prediction error rate of only 1%and processing times of less than 0.1 s.Contrastingly,algorithms such as FSA,DE,and ADE,although slightly slower(approximately 1 s),demonstrated higher accuracy with a 0.3%relative L_2 error,which advances RODT methodologies to harness machine learning and system modeling for improved reactor monitoring,systematic diagnosis of off-normal events,and lifetime management strategies.The developed modular software and novel optimization methods presented offer pathways to realize the full potential of RODT for transforming energy engineering practices.
基金supported in part by the Guangxi Power Grid Company’s 2023 Science and Technol-ogy Innovation Project(No.GXKJXM20230169)。
文摘With the development of unmanned driving technology,intelligent robots and drones,high-precision localization,navigation and state estimation technologies have also made great progress.Traditional global navigation satellite system/inertial navigation system(GNSS/INS)integrated navigation systems can provide high-precision navigation information continuously.However,when this system is applied to indoor or GNSS-denied environments,such as outdoor substations with strong electromagnetic interference and complex dense spaces,it is often unable to obtain high-precision GNSS positioning data.The positioning and orientation errors will diverge and accumulate rapidly,which cannot meet the high-precision localization requirements in large-scale and long-distance navigation scenarios.This paper proposes a method of high-precision state estimation with fusion of GNSS/INS/Vision using a nonlinear optimizer factor graph optimization as the basis for multi-source optimization.Through the collected experimental data and simulation results,this system shows good performance in the indoor environment and the environment with partial GNSS signal loss.
基金National Key Research and Development Program of China (Grant No. 2022YFE0102700)National Natural Science Foundation of China (Grant No. 52102420)+2 种基金research project “Safe Da Batt” (03EMF0409A) funded by the German Federal Ministry of Digital and Transport (BMDV)China Postdoctoral Science Foundation (Grant No. 2023T160085)Sichuan Science and Technology Program (Grant No. 2024NSFSC0938)。
文摘A fast-charging policy is widely employed to alleviate the inconvenience caused by the extended charging time of electric vehicles. However, fast charging exacerbates battery degradation and shortens battery lifespan. In addition, there is still a lack of tailored health estimations for fast-charging batteries;most existing methods are applicable at lower charging rates. This paper proposes a novel method for estimating the health of lithium-ion batteries, which is tailored for multi-stage constant current-constant voltage fast-charging policies. Initially, short charging segments are extracted by monitoring current switches,followed by deriving voltage sequences using interpolation techniques. Subsequently, a graph generation layer is used to transform the voltage sequence into graphical data. Furthermore, the integration of a graph convolution network with a long short-term memory network enables the extraction of information related to inter-node message transmission, capturing the key local and temporal features during the battery degradation process. Finally, this method is confirmed by utilizing aging data from 185 cells and 81 distinct fast-charging policies. The 4-minute charging duration achieves a balance between high accuracy in estimating battery state of health and low data requirements, with mean absolute errors and root mean square errors of 0.34% and 0.66%, respectively.
基金supported in part by the National Natural Science Foundation of China(61933007, U21A2019, 62273005, 62273088, 62303301)the Program of Shanghai Academic/Technology Research Leader of China (20XD1420100)+2 种基金the Hainan Province Science and Technology Special Fund of China(ZDYF2022SHFZ105)the Natural Science Foundation of Anhui Province of China (2108085MA07)the Alexander von Humboldt Foundation of Germany。
文摘This paper investigates the anomaly-resistant decentralized state estimation(SE) problem for a class of wide-area power systems which are divided into several non-overlapping areas connected through transmission lines. Two classes of measurements(i.e., local measurements and edge measurements) are obtained, respectively, from the individual area and the transmission lines. A decentralized state estimator, whose performance is resistant against measurement with anomalies, is designed based on the minimum error entropy with fiducial points(MEEF) criterion. Specifically, 1) An augmented model, which incorporates the local prediction and local measurement, is developed by resorting to the unscented transformation approach and the statistical linearization approach;2) Using the augmented model, an MEEF-based cost function is designed that reflects the local prediction errors of the state and the measurement;and 3) The local estimate is first obtained by minimizing the MEEF-based cost function through a fixed-point iteration and then updated by using the edge measuring information. Finally, simulation experiments with three scenarios are carried out on the IEEE 14-bus system to illustrate the validity of the proposed anomaly-resistant decentralized SE scheme.
基金funded by the China Postdoctoral Science Foundation(No.2023M730337)。
文摘This study investigated the problems of non-cooperative target recognition and relative motion estimation during spacecraft rendezvous maneuvers.A structure integrating an Inertial Measurement Unit(IMU)and a visual camera was presented.The angular velocity output of the IMU was used to calculate the motion trajectories of star points in multiple image frames,which can highlight the motion of non-cooperative targets with respect to the image background to improve the probability of target recognition.To solve the problem of target misidentification caused by new star points entering the field of view,a target-tracking link based on IMU prediction was introduced to track the position of the target in the image.Furthermore,a measurement model was constructed using the line-of-sight vector generated from target recognition,and the relative motion state was estimated using a Huber-based non-linear filter.Semi-physical and numerical simulations were performed to evaluate the effectiveness and efficiency of the proposed method.
基金Project supported by the Natural Science Foundation of Jiangsu Province(Grant Nos.BK20233001 and BK20243060)the National Natural Science Foundation of China(Grant No.62288101)。
文摘The estimation of quantum phase differences plays an important role in quantum simulation and quantum computation,yet existing quantum phase estimation algorithms face critical limitations in noisy intermediate-scale quantum(NISQ)devices due to their excessive depth and circuit complexity.We demonstrate a high-precision phase difference estimation protocol based on the Bayesian phase difference estimation algorithm and single-photon projective measurement.The iterative framework of the algorithm,combined with the independence from controlled unitary operations,inherently mitigates circuit depth and complexity limitations.Through an experimental realization on the photonic system,we demonstrate high-precision estimation of diverse phase differences,showing root-mean-square errors(RMSE)below the standard quantum limit𝒪(1/√N)and reaching the Heisenberg scaling𝒪(1/N)after a certain number of iterations.Our scheme provides a critical advantage in quantum resource-constrained scenarios,and advances practical implementations of quantum information tasks under realistic hardware constraints.
文摘A spacecraft attitude estimation method based on electromagnetic vector sensors(EMVS)array is proposed,which employs the orthogonally constrained parallel factor(PARAFAC)algorithm and makes use of measurements of the two-dimensional direction-of-arrival(2D-DOA)and polarization angles,aiming to address the issues of incomplete,asynchronous,and inaccurate third-party reference used for attitude estimation in spacecraft docking missions by employing the electromagnetic wave’s three-dimensional(3D)wave structure as a complete third-party reference.Comparative analysis with state-ofthe-art algorithms shows significant improvements in estimation accuracy and computational efficiency with this algorithm.Numerical simulations have verified the effectiveness and superiority of this method.A high-precision,reliable,and cost-effective method for rapid spacecraft attitude estimation is provided in this paper.
基金supported by the National Natural Science Foundation of China(62373224,62333013,U23A20327)the Natural Science Foundation of Shandong Province(ZR2024JQ021)
文摘Dear Editor,Health management is essential to ensure battery performance and safety, while data-driven learning system is a promising solution to enable efficient state of health(SoH) estimation of lithium-ion(Liion) batteries. However, the time-consuming signal data acquisition and the lack of interpretability of model still hinder its efficient deployment. Motivated by this, this letter proposes a novel and interpretable data-driven learning strategy through combining the benefits of explainable AI and non-destructive ultrasonic detection for battery SoH estimation. Specifically, after equipping battery with advanced ultrasonic sensor to promise fast real-time ultrasonic signal measurement, an interpretable data-driven learning strategy named generalized additive neural decision ensemble(GANDE) is designed to rapidly estimate battery SoH and explain the effects of the involved ultrasonic features of interest.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.62373197 and 61873326)。
文摘In many engineering networks, only a part of target state variables are required to be estimated.On the other hand,multi-layer complex network exists widely in practical situations.In this paper, the state estimation of target state variables in multi-layer complex dynamical networks with nonlinear node dynamics is studied.A suitable functional state observer is constructed with the limited measurement.The parameters of the designed functional observer are obtained from the algebraic method and the stability of the functional observer is proven by the Lyapunov theorem.Some necessary conditions that need to be satisfied for the design of the functional state observer are obtained.Different from previous studies, in the multi-layer complex dynamical network with nonlinear node dynamics, the proposed method can estimate the state of target variables on some layers directly instead of estimating all the individual states.Thus, it can greatly reduce the placement of observers and computational cost.Numerical simulations with the three-layer complex dynamical network composed of three-dimensional nonlinear dynamical nodes are developed to verify the effectiveness of the method.
