A neural network control scheme with mixed H2/H∞performance was proposed for robot force/position control under parameter uncertainties and external disturbances. The mixed H2/H∞tracking performance ensures both rob...A neural network control scheme with mixed H2/H∞performance was proposed for robot force/position control under parameter uncertainties and external disturbances. The mixed H2/H∞tracking performance ensures both robust stability under a prescribed attenuation level for external disturbance and H2optimal tracking. The neural network was introduced to adaptively estimate nonlinear uncertainties, improving the system’s performance under parameter uncertainties as well as obtaining the H2/H∞tracking performance. The simulation shows that the control method performs better even when the system is under large modeling uncertainties and external disturbances.展开更多
This paper proposes a feasible force/position control method for industrial robots utilized for such tasks as grinding, polishing, deburring, and so on. Specifically, an adaptive force/position control strategy is des...This paper proposes a feasible force/position control method for industrial robots utilized for such tasks as grinding, polishing, deburring, and so on. Specifically, an adaptive force/position control strategy is designed in this paper which regulates the contact force between a robot and a workpiece to reach any given set-point exponentially fast, and enables the robot to follow a chosen trajectory simultaneously without requiring prior knowledge of the system parameters. The stability of the closed-loop system is analyzed by Lyapunov techniques. To test the validity of the force/position control method, some simulation results are first collected for the closed-loop system. Furthermore, some experiments are implemented on a 5DOF （degree of freedom） industrial robot for the constructed adaptive force controller. Both simulation and experiment results demonstrate the superior performance of the designed adaptive force/position control strategy.展开更多
This paper reviews robotic position and force control techniques. The existing fundamental force control algorithms are compared and discussed, including explicit/implicit control, stiffness control, impedance/admit- ...This paper reviews robotic position and force control techniques. The existing fundamental force control algorithms are compared and discussed, including explicit/implicit control, stiffness control, impedance/admit- tance control, and hybrid position/force control. This work is intended to give a basic guidance for understanding and utilization of the fundamental robotic control algorithm.展开更多
The single-point bending method,based on atomic force microscopy(AFM),has been extensively validated for characterizing the structural mechanical properties of micro-and nanobeams.Nevertheless,the influence of AFM pro...The single-point bending method,based on atomic force microscopy(AFM),has been extensively validated for characterizing the structural mechanical properties of micro-and nanobeams.Nevertheless,the influence of AFM probe loading and positioning has yet to be subjected to comprehensive investigation.This paper proposes a novel bending-test method based on sequential loading points,in which a series of evenly distributed loads are applied along the length of the central axis on the upper surface of the cantilever.The preliminary measured values of Young’s modulus for an unknown alloy material were 193,178,and 176 GPa,exhibiting a considerable degree of dispersion.An algorithm for self-correction of the positioning error was developed,and this resulted in a positioning error of 53 nm and a final converged Young’s modulus of 161 GPa.展开更多
It is crucial for implementing force/position control of robotic manipulator under the constraint of unknown environment to determine the force control and the position control directions. This paper presents an on l...It is crucial for implementing force/position control of robotic manipulator under the constraint of unknown environment to determine the force control and the position control directions. This paper presents an on line algorithm to real timely estimate the tangent and the normal vectors of the constraint surface based on the measured contact force under the consideration of frictional force. A fuzzy synthesis policy is proposed to coordinate the conflict between the compliant force control and the stiff position control. An experimental study on an AdeptThree, a SCARA type robotic manipulator, is conducted. The experimental results show that the policy presented in the paper is effective.展开更多
A force control strategy for position controlled robotic manipulators is presented. On line force feedback data are employed to estimate the local shape of the unknown constraint. The estimated vectors are used to ge...A force control strategy for position controlled robotic manipulators is presented. On line force feedback data are employed to estimate the local shape of the unknown constraint. The estimated vectors are used to generate the virtual reference trajectory for the target impedance model that is driven by the force error to produce command position. By following the command position trajectory the robotic manipulator can follow the unknown constraint surface while keeping an acceptable force error in a manner depicted by the target impedance model. Computer simulation on a 3 linked planar manipulator and experimental studies on an Adept 3, an SCARA type robotic manipulator, are conducted to verify the force tracking capability of the proposed control strategy.展开更多
Force control merged with motion control represent the fundamental low level requirements for the most complex tasks to be performed by any robot.In particular,robust motion and force controllers allow robots to deal ...Force control merged with motion control represent the fundamental low level requirements for the most complex tasks to be performed by any robot.In particular,robust motion and force controllers allow robots to deal with real-world uncertainties among other disturbances.In this paper,an admittance-based force controller using the Active Disturbance Rejection Control approach is proposed,which allows to perform robot force control without a force sensor.In addition,a theoretical synthesis of the control law including an extended state observer for the estimation of the robot–surface force interaction and their formal stability analysis is presented.The validation of the proposal is depicted by numerical simulations using the dynamical model of a two degrees of freedom robot manipulator,for both a constant and a time-varying force control tasks with an unknown curved surface,while considering joint measurement noise and force sensors noise and an external disturbance force.展开更多
Digital modeling and autonomous control of the die forging process are significant challenges in realizing high-quality intelli-gent forging of components.Using the die forging of AA2014 aluminum alloy as a case study...Digital modeling and autonomous control of the die forging process are significant challenges in realizing high-quality intelli-gent forging of components.Using the die forging of AA2014 aluminum alloy as a case study,a machine-learning-assisted method for di-gital modeling of the forging force and autonomous control in response to forging parameter disturbances was proposed.First,finite ele-ment simulations of the forging processes were conducted under varying friction factors,die temperatures,billet temperatures,and for-ging velocities,and the sample data,including process parameters and forging force under different forging strokes,were gathered.Pre-diction models for the forging force were established using the support vector regression algorithm.The prediction error of F_(f),that is,the forging force required to fill the die cavity fully,was as low as 4.1%.To further improve the prediction accuracy of the model for the ac-tual F_(f),two rounds of iterative forging experiments were conducted using the Bayesian optimization algorithm,and the prediction error of F_(f) in the forging experiments was reduced from 6.0%to 1.5%.Finally,the prediction model of F_(f) combined with a genetic algorithm was used to establish an autonomous optimization strategy for the forging velocity at each stage of the forging stroke,when the billet and die temperatures were disturbed,which realized the autonomous control in response to disturbances.In cases of−20 or−40℃ reductions in the die and billet temperatures,forging experiments conducted with the autonomous optimization strategy maintained the measured F_(f) around the target value of 180 t,with the relative error ranging from−1.3%to+3.1%.This work provides a reference for the study of di-gital modeling and autonomous optimization control of quality factors in the forging process.展开更多
Exosomes derived from bone mesenchymal stem cells(BMSCs)show promising potential for treating bone defects.However,their clinical application is hindered by low yield and insufficient repair ability.Three-dimensional(...Exosomes derived from bone mesenchymal stem cells(BMSCs)show promising potential for treating bone defects.However,their clinical application is hindered by low yield and insufficient repair ability.Three-dimensional(3D)mechanical stimulation has been a well-known method for enhancing exosome secretion;however,the traditional stimulation process is always achieved by controlling the displacement of manipulators,which may induce uneven loading distribution and degradation of stimulation strength.Here,we propose a micro-stretching manipulator that automatically controls the stretching force applied to gelatin methacryloyl(GelMA)/hyaluronic acid methacryloyl(HAMA)hybrid hydrogel sheets containing BMSCs within an incubator.To ensure the structural stability of the sheets after long-term stretching,the mixing ratio between GelMA and HAMA was optimized according to the mechanical property response of the sheets to cyclical loading.Subsequently,force-controlled mechanical loading was applied to the BMSC-laden sheets to produce exosomes.Compared with displacement control,force-controlled loading provides a more stable force stimulation,thereby enhancing exosome secretion.Furthermore,continuously stimulated exosomes exhibited a stronger capacity for promoting osteogenic differentiation of BMSCs and facilitating the repair of bone defects in a rat model.These findings suggest that force-controlled loading of cell-laden hydrogels offers a novel approach for the production of BMSC-derived exosomes and their application in bone repair.展开更多
Rotary steering systems(RSSs)have been increasingly used to develop horizontal wells.A static push-the-bit RSS uses three hydraulic modules with varying degrees of expansion and contraction to achieve changes in the p...Rotary steering systems(RSSs)have been increasingly used to develop horizontal wells.A static push-the-bit RSS uses three hydraulic modules with varying degrees of expansion and contraction to achieve changes in the pushing force acting on the wellbore in different sizes and directions within a circular range,ultimately allowing the wellbore trajectory to be drilled in a predetermined direction.By analyzing its mathematical principles and the actual characteristics of the instrument,a vector force closed-loop control method,including steering and holding modes,was designed.The adjustment criteria for the three hydraulic modules are determined to achieve rapid adjustment of the vector force.The theoretical feasibility of the developed method was verified by comparing its results with the on-site application data of an imported rotary guidance system.展开更多
An improved hybrid position/force controller design of a flexible robot manipulator is presented using a sliding observer. The friction between the end effector and the environment is considered and compensated. For s...An improved hybrid position/force controller design of a flexible robot manipulator is presented using a sliding observer. The friction between the end effector and the environment is considered and compensated. For systematic reasons the controller is designed taking into consideration the rigid link subsystems and the flexible joints. The proposed control system satisfies the stability of the two subsystems and copes with the uncertainty of robot dynamics. A sliding observer is designed to estimate the time derivative of the torque applied as input to the rigid part of the robot. For the stability of the observer, it is assumed that the uncertainty of the observed system is bounded. A MRAC algorithm is used for the estimation of the friction forces at the contact point between the end effector and the environment. Finally simulation and experimental results are given, to demonstrate the effectiveness of the proposed controller.展开更多
A decentralized adaptive neural network sliding mode position/force control scheme is proposed for constrained reconfigurable manipulators. Different from the decentralized control strategy in multi-manipulator cooper...A decentralized adaptive neural network sliding mode position/force control scheme is proposed for constrained reconfigurable manipulators. Different from the decentralized control strategy in multi-manipulator cooperation, the proposed decentralized position/force control scheme can be applied to series constrained reconfigurable manipulators. By multiplying each row of Jacobian matrix in the dynamics by contact force vector, the converted joint torque is obtained. Furthermore, using desired information of other joints instead of their actual values, the dynamics can be represented as a set of interconnected subsystems by model decomposition technique. An adaptive neural network controller is introduced to approximate the unknown dynamics of subsystem. The interconnection and the whole error term are removed by employing an adaptive sliding mode term. And then, the Lyapunov stability theory guarantees the stability of the closed-loop system. Finally, two reconfigurable manipulators with different configurations are employed to show the effectiveness of the proposed decentralized position/force control scheme.展开更多
A position/force hybrid control system based on impedance control scheme is designed to align a small gripper to a special ring object. The vision information provided by microscope vision system is used as the feedba...A position/force hybrid control system based on impedance control scheme is designed to align a small gripper to a special ring object. The vision information provided by microscope vision system is used as the feedback to indicate the position relationship between the gripper and the ring object. Multiple image features of the gripper and the ring object are extracted to estimate the relative positions between them. The end-effector of the gripper is tracked using the extracted features to keep the gripper moving in the field of view. The force information from the force sensor serves as the feedback to ensure that the contact force between the gripper and the ring object is limited in a small safe range. Experimental results verify the effectiveness of the proposed control strategy.展开更多
Whole-body control is beneficial for improving the disturbance adaptation of humanoid robots,since it can simultaneously optimize desired joint torque,joint acceleration,and contact force while considering whole-body ...Whole-body control is beneficial for improving the disturbance adaptation of humanoid robots,since it can simultaneously optimize desired joint torque,joint acceleration,and contact force while considering whole-body dynamics and other physical limits.However,the lack of torque feedback information prevents the position-controlled humanoids from utilizing whole-body control directly,because it enhances the difficulty of guaranteeing desired contact force which is important for maintaining stability.In this paper,a whole-body control that integrates task-space inverse dynamics and variable contact force control is proposed for position-controlled humanoids to enhance the robot’s adaptability toward the unknown disturbance.The task-space inverse dynamics generates the desired joint acceleration and contact force with the consideration of whole-body dynamics and other limits to track the references.The variable contact force control modifies references related to Center of Mass(CoM)and end effectors to ensure reasonable contact force tracking performance,thereby assuring good tracking performance of CoM and momentum to maintain robot stability.Simulations and experiments of balancing and walking under unknown disturbance have been successfully conducted on a position-controlled humanoid robot,BHR-7P3,with the proposed method.展开更多
This paper proposes robot position control using force information for cooperative work between two remote robot systems with force feedback in each of which a user operates a remote robot by using a haptic interface ...This paper proposes robot position control using force information for cooperative work between two remote robot systems with force feedback in each of which a user operates a remote robot by using a haptic interface device while observing work of the robot with a video camera. We also investigate the effect of the proposed control by experiment. As cooperative work, we deal with work in which two robots carry an object together. The robot position control using force information finely adjusts the position of the robot arm to reduce the force applied to the object. Thus, the purpose of the control is to avoid large force so that the object is not broken. In our experiment, we make a comparison among the following three cases in order to clarify how to carry out the control effectively. In the first case, the two robots are operated manually by a user with his/her both hands. In the second case, one robot is operated manually by a user, and the other robot is moved automatically under the proposed control. In the last case, the object is carried directly by a human instead of the robot which is operated by the user in the second case. As a result, experimental results demonstrate that the control can help each system operated manually by the user to carry the object smoothly.展开更多
Most existing legged robots are developed under laboratory environments and, corre- spondingly, have good performance of locomotion. The robots＇ ability of walking on rough terrain is of great importance but is seldo...Most existing legged robots are developed under laboratory environments and, corre- spondingly, have good performance of locomotion. The robots＇ ability of walking on rough terrain is of great importance but is seldom achieved. Being compliant to external unperceived impacts is cru- cial since it is unavoidable that the slip, modeling errors and imprecise information of terrain will make planned trajectories to be followed with errors and unpredictable contacts. The impedance control gives an inspiration to realize an active compliance which allows the legged robots to follow reference trajectories and overcome external disturbances. In this paper, a novel impedance force/ position control scheme is presented, which is based on Cartesian force measurement of leg＇ s end effector for our hydraulic quadruped robot The simulation verifies the efficiency of the impedance model, and the experimental results at the end demonstrate the feasibility of the proposed control scheme.展开更多
A hybrid position/force controller is designed for the joint 2 and the joint 3 of thePUMA 560 robot.The hybrid controller includes a multilayered neural network,which canidentify the dynamics of the contacted environm...A hybrid position/force controller is designed for the joint 2 and the joint 3 of thePUMA 560 robot.The hybrid controller includes a multilayered neural network,which canidentify the dynamics of the contacted environment and can optimize the parameters of PIDcontroller.The experimental results show that after having been trained,the robot has sta-ble response to the training patterns and strong adaptive ability to the situation between thepatterns.展开更多
Background:Residual torque enhancement(rTE)is the increase in torque observed during the isometric steady state following active muscle lengthening when compared with a fixed-end isometric contraction at the same musc...Background:Residual torque enhancement(rTE)is the increase in torque observed during the isometric steady state following active muscle lengthening when compared with a fixed-end isometric contraction at the same muscle length and level of neuromuscular activation.In the rTE state,owing to an elevated contribution of passive force to total force production,less active force is required,and there is a subsequent reduction in activation.In vivo studies of rTE reporting an activation reduction are often performed using a dynamometer,where participants contract against a rigid restraint,resisting a torque motor.rTE has yet to be investigated during a position task,which involves the displacement of an inertial load with positional control.Methods:A total of 12 participants(6 males,6 females;age=22.8±1.1 years,height=174.7±8.6 cm,mass=82.1±37.7 kg;mean±SD)completed torque-and position-matching tasks at 60%maximum voluntary contraction for a fixed-end isometric contraction and an isometric contraction following active lengthening of the ankle dorsiflexors.Results:There were no significant differences in activation between torque-and position-matching tasks(p=0.743),with^27%activation reduction following active lengthening for both task types(p<0.001).Conclusion:These results indicate that rTE is a feature of voluntary,position-controlled contractions.These findings support and extend previous findings of isometric torque-control conditions to position-controlled contractions that represent different tasks of daily living.展开更多
If the rigidity of a mechanism is stiff enough, the position synchronous error of the two cylinders driving one degree-of-freedom （DOF） of the mechanism may be less than the resolution of position sensors. To handle...If the rigidity of a mechanism is stiff enough, the position synchronous error of the two cylinders driving one degree-of-freedom （DOF） of the mechanism may be less than the resolution of position sensors. To handle this synchronization problem this paper proposes a force/position switching scheme, which partitions the two cylinders into a master cylinder and a slave cylinder. The master cylinder is always position tracking controlled by a second-order sliding mode controller and the slave cylinder is integrated with a force tracking controller which is a first order sliding mode controller. When the position tracking error is less than a given value, the slave cylinder switches to be force controlled. Two synchronization control methods are presented based on the switching scheme： the master - master ＋ force/position switching control and the master - slave ＋ force/position switching control. Simulations show that the formance compared with two given proposed synchronization control position-based control methods. methods can get a better per-展开更多
文摘A neural network control scheme with mixed H2/H∞performance was proposed for robot force/position control under parameter uncertainties and external disturbances. The mixed H2/H∞tracking performance ensures both robust stability under a prescribed attenuation level for external disturbance and H2optimal tracking. The neural network was introduced to adaptively estimate nonlinear uncertainties, improving the system’s performance under parameter uncertainties as well as obtaining the H2/H∞tracking performance. The simulation shows that the control method performs better even when the system is under large modeling uncertainties and external disturbances.
基金Supported by the National Natural Science Foundation of China （60875055）, the Program for New Century Excellent Talents in University （NCET-06- 0210） and the Natural Science Foundation of Tianjin （08JCZDJC21800）.
文摘This paper proposes a feasible force/position control method for industrial robots utilized for such tasks as grinding, polishing, deburring, and so on. Specifically, an adaptive force/position control strategy is designed in this paper which regulates the contact force between a robot and a workpiece to reach any given set-point exponentially fast, and enables the robot to follow a chosen trajectory simultaneously without requiring prior knowledge of the system parameters. The stability of the closed-loop system is analyzed by Lyapunov techniques. To test the validity of the force/position control method, some simulation results are first collected for the closed-loop system. Furthermore, some experiments are implemented on a 5DOF （degree of freedom） industrial robot for the constructed adaptive force controller. Both simulation and experiment results demonstrate the superior performance of the designed adaptive force/position control strategy.
文摘This paper reviews robotic position and force control techniques. The existing fundamental force control algorithms are compared and discussed, including explicit/implicit control, stiffness control, impedance/admit- tance control, and hybrid position/force control. This work is intended to give a basic guidance for understanding and utilization of the fundamental robotic control algorithm.
文摘The single-point bending method,based on atomic force microscopy(AFM),has been extensively validated for characterizing the structural mechanical properties of micro-and nanobeams.Nevertheless,the influence of AFM probe loading and positioning has yet to be subjected to comprehensive investigation.This paper proposes a novel bending-test method based on sequential loading points,in which a series of evenly distributed loads are applied along the length of the central axis on the upper surface of the cantilever.The preliminary measured values of Young’s modulus for an unknown alloy material were 193,178,and 176 GPa,exhibiting a considerable degree of dispersion.An algorithm for self-correction of the positioning error was developed,and this resulted in a positioning error of 53 nm and a final converged Young’s modulus of 161 GPa.
文摘It is crucial for implementing force/position control of robotic manipulator under the constraint of unknown environment to determine the force control and the position control directions. This paper presents an on line algorithm to real timely estimate the tangent and the normal vectors of the constraint surface based on the measured contact force under the consideration of frictional force. A fuzzy synthesis policy is proposed to coordinate the conflict between the compliant force control and the stiff position control. An experimental study on an AdeptThree, a SCARA type robotic manipulator, is conducted. The experimental results show that the policy presented in the paper is effective.
文摘A force control strategy for position controlled robotic manipulators is presented. On line force feedback data are employed to estimate the local shape of the unknown constraint. The estimated vectors are used to generate the virtual reference trajectory for the target impedance model that is driven by the force error to produce command position. By following the command position trajectory the robotic manipulator can follow the unknown constraint surface while keeping an acceptable force error in a manner depicted by the target impedance model. Computer simulation on a 3 linked planar manipulator and experimental studies on an Adept 3, an SCARA type robotic manipulator, are conducted to verify the force tracking capability of the proposed control strategy.
基金Julio Antonio Caballero-Mora acknowledges the CONAHCYT Scholarship number 828530。
文摘Force control merged with motion control represent the fundamental low level requirements for the most complex tasks to be performed by any robot.In particular,robust motion and force controllers allow robots to deal with real-world uncertainties among other disturbances.In this paper,an admittance-based force controller using the Active Disturbance Rejection Control approach is proposed,which allows to perform robot force control without a force sensor.In addition,a theoretical synthesis of the control law including an extended state observer for the estimation of the robot–surface force interaction and their formal stability analysis is presented.The validation of the proposal is depicted by numerical simulations using the dynamical model of a two degrees of freedom robot manipulator,for both a constant and a time-varying force control tasks with an unknown curved surface,while considering joint measurement noise and force sensors noise and an external disturbance force.
基金financially supported by the National Key Research and Development Program of China(No.2022YFB3706901)the National Natural Science Foundation of China(No.52090041)the Young Elite Scientists Sponsorship Program by CAST(No.2022QNRC 001).
文摘Digital modeling and autonomous control of the die forging process are significant challenges in realizing high-quality intelli-gent forging of components.Using the die forging of AA2014 aluminum alloy as a case study,a machine-learning-assisted method for di-gital modeling of the forging force and autonomous control in response to forging parameter disturbances was proposed.First,finite ele-ment simulations of the forging processes were conducted under varying friction factors,die temperatures,billet temperatures,and for-ging velocities,and the sample data,including process parameters and forging force under different forging strokes,were gathered.Pre-diction models for the forging force were established using the support vector regression algorithm.The prediction error of F_(f),that is,the forging force required to fill the die cavity fully,was as low as 4.1%.To further improve the prediction accuracy of the model for the ac-tual F_(f),two rounds of iterative forging experiments were conducted using the Bayesian optimization algorithm,and the prediction error of F_(f) in the forging experiments was reduced from 6.0%to 1.5%.Finally,the prediction model of F_(f) combined with a genetic algorithm was used to establish an autonomous optimization strategy for the forging velocity at each stage of the forging stroke,when the billet and die temperatures were disturbed,which realized the autonomous control in response to disturbances.In cases of−20 or−40℃ reductions in the die and billet temperatures,forging experiments conducted with the autonomous optimization strategy maintained the measured F_(f) around the target value of 180 t,with the relative error ranging from−1.3%to+3.1%.This work provides a reference for the study of di-gital modeling and autonomous optimization control of quality factors in the forging process.
基金support from the National Key Research and Development Program of China(No.2021YFB3802105-3)the National Natural Science Foundation of China(No.62173043).
文摘Exosomes derived from bone mesenchymal stem cells(BMSCs)show promising potential for treating bone defects.However,their clinical application is hindered by low yield and insufficient repair ability.Three-dimensional(3D)mechanical stimulation has been a well-known method for enhancing exosome secretion;however,the traditional stimulation process is always achieved by controlling the displacement of manipulators,which may induce uneven loading distribution and degradation of stimulation strength.Here,we propose a micro-stretching manipulator that automatically controls the stretching force applied to gelatin methacryloyl(GelMA)/hyaluronic acid methacryloyl(HAMA)hybrid hydrogel sheets containing BMSCs within an incubator.To ensure the structural stability of the sheets after long-term stretching,the mixing ratio between GelMA and HAMA was optimized according to the mechanical property response of the sheets to cyclical loading.Subsequently,force-controlled mechanical loading was applied to the BMSC-laden sheets to produce exosomes.Compared with displacement control,force-controlled loading provides a more stable force stimulation,thereby enhancing exosome secretion.Furthermore,continuously stimulated exosomes exhibited a stronger capacity for promoting osteogenic differentiation of BMSCs and facilitating the repair of bone defects in a rat model.These findings suggest that force-controlled loading of cell-laden hydrogels offers a novel approach for the production of BMSC-derived exosomes and their application in bone repair.
基金supported by the Opening Foundation of China National Logging Corporation(CNLC20229C06)the China Petroleum Technical Service Corporation's science project'Development and application of 475 rotary steering system'(2024T-001001)。
文摘Rotary steering systems(RSSs)have been increasingly used to develop horizontal wells.A static push-the-bit RSS uses three hydraulic modules with varying degrees of expansion and contraction to achieve changes in the pushing force acting on the wellbore in different sizes and directions within a circular range,ultimately allowing the wellbore trajectory to be drilled in a predetermined direction.By analyzing its mathematical principles and the actual characteristics of the instrument,a vector force closed-loop control method,including steering and holding modes,was designed.The adjustment criteria for the three hydraulic modules are determined to achieve rapid adjustment of the vector force.The theoretical feasibility of the developed method was verified by comparing its results with the on-site application data of an imported rotary guidance system.
文摘An improved hybrid position/force controller design of a flexible robot manipulator is presented using a sliding observer. The friction between the end effector and the environment is considered and compensated. For systematic reasons the controller is designed taking into consideration the rigid link subsystems and the flexible joints. The proposed control system satisfies the stability of the two subsystems and copes with the uncertainty of robot dynamics. A sliding observer is designed to estimate the time derivative of the torque applied as input to the rigid part of the robot. For the stability of the observer, it is assumed that the uncertainty of the observed system is bounded. A MRAC algorithm is used for the estimation of the friction forces at the contact point between the end effector and the environment. Finally simulation and experimental results are given, to demonstrate the effectiveness of the proposed controller.
基金Project(61374051,61603387)supported by the National Natural Science Foundation of ChinaProjects(20150520112JH,20160414033GH)supported by the Scientific and Technological Development Plan in Jilin Province of ChinaProject(20150102)supported by Opening Funding of State Key Laboratory of Management and Control for Complex Systems,China
文摘A decentralized adaptive neural network sliding mode position/force control scheme is proposed for constrained reconfigurable manipulators. Different from the decentralized control strategy in multi-manipulator cooperation, the proposed decentralized position/force control scheme can be applied to series constrained reconfigurable manipulators. By multiplying each row of Jacobian matrix in the dynamics by contact force vector, the converted joint torque is obtained. Furthermore, using desired information of other joints instead of their actual values, the dynamics can be represented as a set of interconnected subsystems by model decomposition technique. An adaptive neural network controller is introduced to approximate the unknown dynamics of subsystem. The interconnection and the whole error term are removed by employing an adaptive sliding mode term. And then, the Lyapunov stability theory guarantees the stability of the closed-loop system. Finally, two reconfigurable manipulators with different configurations are employed to show the effectiveness of the proposed decentralized position/force control scheme.
基金supported by National Natural Science Foundation of China(No.61105036 and 61227804)
文摘A position/force hybrid control system based on impedance control scheme is designed to align a small gripper to a special ring object. The vision information provided by microscope vision system is used as the feedback to indicate the position relationship between the gripper and the ring object. Multiple image features of the gripper and the ring object are extracted to estimate the relative positions between them. The end-effector of the gripper is tracked using the extracted features to keep the gripper moving in the field of view. The force information from the force sensor serves as the feedback to ensure that the contact force between the gripper and the ring object is limited in a small safe range. Experimental results verify the effectiveness of the proposed control strategy.
基金This work was supported in part by the National Natural Science Foundation of China under Grant 62073041 and 61973039in part by the Beijing Municipal Science and Technology Project under Grant Z221100000222013in part by the“111”Project under Grant B08043.
文摘Whole-body control is beneficial for improving the disturbance adaptation of humanoid robots,since it can simultaneously optimize desired joint torque,joint acceleration,and contact force while considering whole-body dynamics and other physical limits.However,the lack of torque feedback information prevents the position-controlled humanoids from utilizing whole-body control directly,because it enhances the difficulty of guaranteeing desired contact force which is important for maintaining stability.In this paper,a whole-body control that integrates task-space inverse dynamics and variable contact force control is proposed for position-controlled humanoids to enhance the robot’s adaptability toward the unknown disturbance.The task-space inverse dynamics generates the desired joint acceleration and contact force with the consideration of whole-body dynamics and other limits to track the references.The variable contact force control modifies references related to Center of Mass(CoM)and end effectors to ensure reasonable contact force tracking performance,thereby assuring good tracking performance of CoM and momentum to maintain robot stability.Simulations and experiments of balancing and walking under unknown disturbance have been successfully conducted on a position-controlled humanoid robot,BHR-7P3,with the proposed method.
文摘This paper proposes robot position control using force information for cooperative work between two remote robot systems with force feedback in each of which a user operates a remote robot by using a haptic interface device while observing work of the robot with a video camera. We also investigate the effect of the proposed control by experiment. As cooperative work, we deal with work in which two robots carry an object together. The robot position control using force information finely adjusts the position of the robot arm to reduce the force applied to the object. Thus, the purpose of the control is to avoid large force so that the object is not broken. In our experiment, we make a comparison among the following three cases in order to clarify how to carry out the control effectively. In the first case, the two robots are operated manually by a user with his/her both hands. In the second case, one robot is operated manually by a user, and the other robot is moved automatically under the proposed control. In the last case, the object is carried directly by a human instead of the robot which is operated by the user in the second case. As a result, experimental results demonstrate that the control can help each system operated manually by the user to carry the object smoothly.
基金Supported by the National High Technology Research and Development Program of China(863Program)(2011AA041002)
文摘Most existing legged robots are developed under laboratory environments and, corre- spondingly, have good performance of locomotion. The robots＇ ability of walking on rough terrain is of great importance but is seldom achieved. Being compliant to external unperceived impacts is cru- cial since it is unavoidable that the slip, modeling errors and imprecise information of terrain will make planned trajectories to be followed with errors and unpredictable contacts. The impedance control gives an inspiration to realize an active compliance which allows the legged robots to follow reference trajectories and overcome external disturbances. In this paper, a novel impedance force/ position control scheme is presented, which is based on Cartesian force measurement of leg＇ s end effector for our hydraulic quadruped robot The simulation verifies the efficiency of the impedance model, and the experimental results at the end demonstrate the feasibility of the proposed control scheme.
基金Supported by the National Defence Science & Technology Pre-research Fund of China.
文摘A hybrid position/force controller is designed for the joint 2 and the joint 3 of thePUMA 560 robot.The hybrid controller includes a multilayered neural network,which canidentify the dynamics of the contacted environment and can optimize the parameters of PIDcontroller.The experimental results show that after having been trained,the robot has sta-ble response to the training patterns and strong adaptive ability to the situation between thepatterns.
基金supported by the Natural Sciences and Engineering Research Council of Canada(NSERC),Grant number:03829Infrastructure was provided by the University of Guelph start-up funding.
文摘Background:Residual torque enhancement(rTE)is the increase in torque observed during the isometric steady state following active muscle lengthening when compared with a fixed-end isometric contraction at the same muscle length and level of neuromuscular activation.In the rTE state,owing to an elevated contribution of passive force to total force production,less active force is required,and there is a subsequent reduction in activation.In vivo studies of rTE reporting an activation reduction are often performed using a dynamometer,where participants contract against a rigid restraint,resisting a torque motor.rTE has yet to be investigated during a position task,which involves the displacement of an inertial load with positional control.Methods:A total of 12 participants(6 males,6 females;age=22.8±1.1 years,height=174.7±8.6 cm,mass=82.1±37.7 kg;mean±SD)completed torque-and position-matching tasks at 60%maximum voluntary contraction for a fixed-end isometric contraction and an isometric contraction following active lengthening of the ankle dorsiflexors.Results:There were no significant differences in activation between torque-and position-matching tasks(p=0.743),with^27%activation reduction following active lengthening for both task types(p<0.001).Conclusion:These results indicate that rTE is a feature of voluntary,position-controlled contractions.These findings support and extend previous findings of isometric torque-control conditions to position-controlled contractions that represent different tasks of daily living.
基金Supported by the Major State Basic Research Development Program of China(No.2006CB5406)Important National Science&Technology Specific Projects(No.2009ZX04002-061,2009ZX04004-102)
文摘If the rigidity of a mechanism is stiff enough, the position synchronous error of the two cylinders driving one degree-of-freedom （DOF） of the mechanism may be less than the resolution of position sensors. To handle this synchronization problem this paper proposes a force/position switching scheme, which partitions the two cylinders into a master cylinder and a slave cylinder. The master cylinder is always position tracking controlled by a second-order sliding mode controller and the slave cylinder is integrated with a force tracking controller which is a first order sliding mode controller. When the position tracking error is less than a given value, the slave cylinder switches to be force controlled. Two synchronization control methods are presented based on the switching scheme： the master - master ＋ force/position switching control and the master - slave ＋ force/position switching control. Simulations show that the formance compared with two given proposed synchronization control position-based control methods. methods can get a better per-
