A metal foil spark gap switch is fabricated by using magnetron sputtering deposition technology and standard microelectronic technology. The switch has two main electrodes and a trigger electrode. Stylus profiler is e...A metal foil spark gap switch is fabricated by using magnetron sputtering deposition technology and standard microelectronic technology. The switch has two main electrodes and a trigger electrode. Stylus profiler is employed to measure the distance between the main electrodes and the dimensions of the trigger electrode. The discharge characteristics of the metal foil spark gap switch are discussed. The switch has short delay time and low time jitter. When it is fired by a conventional capacitive discharge unit (CDU), the firing circuit has low inductance and resistance. Because of its low profile structure, it can be easily integrated with the bridge foil used in a conventional exploding foil initiator system (EFIS).展开更多
The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth...The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth of the TiO_2 nanowires, making the preparation straightforward. It also acts as a bottom electrode for the device. A top Al electrode was fabricated by e-beam evaporation process. The Al/TiO_2 nanowire networks/Ti device fabricated in this way displayed a highly repeatable and electroforming-free bipolar resistive behavior with retention for more than 10~4 s and an OFF/ON ratio of approximately 70. The switching mechanism of this Al/TiO_2 nanowire networks/Ti device is suggested to arise from the migration of oxygen vacancies under applied electric field. This provides a facile way to obtain metal oxide nanowire-based Re RAM device in the future.展开更多
A new rectangular pulse trigger generator has been developed which can generate two 10 kV pulses with a risetime less than 1 ns, a jitter of 0.2 ns and a width of about 10 ns and 40 ns, respectively. This generator us...A new rectangular pulse trigger generator has been developed which can generate two 10 kV pulses with a risetime less than 1 ns, a jitter of 0.2 ns and a width of about 10 ns and 40 ns, respectively. This generator uses two polymer-foil switches and 25 ohm Blumlein transmission lines composed of two-parallel standard coaxial cables discharging into two 50 ohm output cables. The pulse width and the delay between two pulses can be adjusted by changing the length of the cables.展开更多
文摘A metal foil spark gap switch is fabricated by using magnetron sputtering deposition technology and standard microelectronic technology. The switch has two main electrodes and a trigger electrode. Stylus profiler is employed to measure the distance between the main electrodes and the dimensions of the trigger electrode. The discharge characteristics of the metal foil spark gap switch are discussed. The switch has short delay time and low time jitter. When it is fired by a conventional capacitive discharge unit (CDU), the firing circuit has low inductance and resistance. Because of its low profile structure, it can be easily integrated with the bridge foil used in a conventional exploding foil initiator system (EFIS).
基金supported by the Natural Sciences and Engineering Research Council(NSERC)of CanadaThe financial support of the State Scholarship Fund of China(No.201506160061)
文摘The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth of the TiO_2 nanowires, making the preparation straightforward. It also acts as a bottom electrode for the device. A top Al electrode was fabricated by e-beam evaporation process. The Al/TiO_2 nanowire networks/Ti device fabricated in this way displayed a highly repeatable and electroforming-free bipolar resistive behavior with retention for more than 10~4 s and an OFF/ON ratio of approximately 70. The switching mechanism of this Al/TiO_2 nanowire networks/Ti device is suggested to arise from the migration of oxygen vacancies under applied electric field. This provides a facile way to obtain metal oxide nanowire-based Re RAM device in the future.
基金supported by National 863-803 Project of China (No.2002AA833050)
文摘A new rectangular pulse trigger generator has been developed which can generate two 10 kV pulses with a risetime less than 1 ns, a jitter of 0.2 ns and a width of about 10 ns and 40 ns, respectively. This generator uses two polymer-foil switches and 25 ohm Blumlein transmission lines composed of two-parallel standard coaxial cables discharging into two 50 ohm output cables. The pulse width and the delay between two pulses can be adjusted by changing the length of the cables.
