[Objective] The paper was to analyze the quality of flux observation data of rubber plantation.[Method]Based on the FSAM model,footprint and flux source area were analyzed according to the continuous flux measurement ...[Objective] The paper was to analyze the quality of flux observation data of rubber plantation.[Method]Based on the FSAM model,footprint and flux source area were analyzed according to the continuous flux measurement with the open-path eddy covariance system on the 50 m tower of Danzhou Key Field Station of Observation and Research for Tropical Agricultural Resources and Environments,Ministry of Agriculture from Jan 1 to Jun 30,2010.[Result] Under unstable stratification,source areas were smaller than those under stable conditions,and source areas in the dormant season were larger than those in the growing season at the same level.In the main wind direction 130°-270°,the upwind range of source areas was in the magnitude of 100-758 m and vertical upwind range was-251-251 m at 80% level under unstable stratification in the growing season,and they were some large than those under the unstable stratification in the dormant season.The source areas of the upwind and vertical upwind ranges were 173-1 858,-534-534 m especially under stable stratification in the growing season,and they were smaller than those under stable stratification in the dormant season.In the other wind directions of 0°-130° and 270°-360°,the ranges were similar to those of the growing season in the prevailing wind direction under the same atmospheric conditions.[Conclusion] The study would lay a foundation for the future flux calculation and analysis.展开更多
We present the first results of a program to identify the unknown bright active galactic nuclei (AGN) in the ROSAT All Sky Survey Bright Source Catalog (RASSBSC). We have used lg C+04 R as an alternative expression fo...We present the first results of a program to identify the unknown bright active galactic nuclei (AGN) in the ROSAT All Sky Survey Bright Source Catalog (RASSBSC). We have used lg C+04 R as an alternative expression for lg (f x f opt ), where C is X-ray count rate and R stands for R magnitude. Then a high X-ray-to-optical flux ratio criterion has been used to select an AGN sample with 165 unidentified X-ray sources for optical spectroscopy. At present over 93% of the X-ray sources in the sample have been fully identified in the following classes: emission line AGNs, clusters of galaxies, BL Lacertae objects, and stars.展开更多
Open source feld operation and manipulation（OpenFOAM）is one of the most prevalent open source computational fluid dynamics（CFD）software.It is very convenient for researchers to develop their own codes based on the...Open source feld operation and manipulation（OpenFOAM）is one of the most prevalent open source computational fluid dynamics（CFD）software.It is very convenient for researchers to develop their own codes based on the class library toolbox within OpenFOAM.In recent years,several density-based solvers within OpenFOAM for supersonic/hypersonic compressible flow are coming up.Although the capabilities of these solvers to capture shock wave have already been verifed by some researchers,these solvers still need to be validated comprehensively as commercial CFD software.In boundary layer where diffusion is the dominant transportation manner,the convective discrete schemes＇capability to capture aerothermal variables,such as temperature and heat flux,is different from each other due to their own numerical dissipative characteristics and from viewpoint of this capability,these compressible solvers within OpenFOAM can be validated further.In this paper,frstly,the organizational architecture of density-based solvers within OpenFOAM is analyzed.Then,from the viewpoint of the capability to capture aerothermal variables,the numerical results of several typical geometrical felds predicted by these solvers are compared with both the outcome obtained from the commercial software Fastran and the experimental data.During the computing process,the Roe,AUSM＋（Advection Upstream Splitting Method）,and HLLC（Harten-Lax-van Leer-Contact）convective discrete schemes of which the spatial accuracy is 1st and 2nd order are utilized,respectively.The compared results show that the aerothermal variables are in agreement with results generated by Fastran and the experimental data even if the1st order spatial precision is implemented.Overall,the accuracy of these density-based solvers can meet the requirement of engineering and scientifc problems to capture aerothermal variables in diffusion boundary layer.展开更多
基金Supported by the Fundamental Research Funds for Rubber Research Institute,CATAS (1630022011013 )Hainan Natural Science Foundation (807045)Running Costs of Danzhou Key Field Station of Observation and Research for Tropical Agricultural Resources and Environments,Ministry of Agriculture~~
文摘[Objective] The paper was to analyze the quality of flux observation data of rubber plantation.[Method]Based on the FSAM model,footprint and flux source area were analyzed according to the continuous flux measurement with the open-path eddy covariance system on the 50 m tower of Danzhou Key Field Station of Observation and Research for Tropical Agricultural Resources and Environments,Ministry of Agriculture from Jan 1 to Jun 30,2010.[Result] Under unstable stratification,source areas were smaller than those under stable conditions,and source areas in the dormant season were larger than those in the growing season at the same level.In the main wind direction 130°-270°,the upwind range of source areas was in the magnitude of 100-758 m and vertical upwind range was-251-251 m at 80% level under unstable stratification in the growing season,and they were some large than those under the unstable stratification in the dormant season.The source areas of the upwind and vertical upwind ranges were 173-1 858,-534-534 m especially under stable stratification in the growing season,and they were smaller than those under stable stratification in the dormant season.In the other wind directions of 0°-130° and 270°-360°,the ranges were similar to those of the growing season in the prevailing wind direction under the same atmospheric conditions.[Conclusion] The study would lay a foundation for the future flux calculation and analysis.
文摘We present the first results of a program to identify the unknown bright active galactic nuclei (AGN) in the ROSAT All Sky Survey Bright Source Catalog (RASSBSC). We have used lg C+04 R as an alternative expression for lg (f x f opt ), where C is X-ray count rate and R stands for R magnitude. Then a high X-ray-to-optical flux ratio criterion has been used to select an AGN sample with 165 unidentified X-ray sources for optical spectroscopy. At present over 93% of the X-ray sources in the sample have been fully identified in the following classes: emission line AGNs, clusters of galaxies, BL Lacertae objects, and stars.
基金supported by the National Natural Science Foundation of China(Grant Nos.51176038,51121004)
文摘Open source feld operation and manipulation（OpenFOAM）is one of the most prevalent open source computational fluid dynamics（CFD）software.It is very convenient for researchers to develop their own codes based on the class library toolbox within OpenFOAM.In recent years,several density-based solvers within OpenFOAM for supersonic/hypersonic compressible flow are coming up.Although the capabilities of these solvers to capture shock wave have already been verifed by some researchers,these solvers still need to be validated comprehensively as commercial CFD software.In boundary layer where diffusion is the dominant transportation manner,the convective discrete schemes＇capability to capture aerothermal variables,such as temperature and heat flux,is different from each other due to their own numerical dissipative characteristics and from viewpoint of this capability,these compressible solvers within OpenFOAM can be validated further.In this paper,frstly,the organizational architecture of density-based solvers within OpenFOAM is analyzed.Then,from the viewpoint of the capability to capture aerothermal variables,the numerical results of several typical geometrical felds predicted by these solvers are compared with both the outcome obtained from the commercial software Fastran and the experimental data.During the computing process,the Roe,AUSM＋（Advection Upstream Splitting Method）,and HLLC（Harten-Lax-van Leer-Contact）convective discrete schemes of which the spatial accuracy is 1st and 2nd order are utilized,respectively.The compared results show that the aerothermal variables are in agreement with results generated by Fastran and the experimental data even if the1st order spatial precision is implemented.Overall,the accuracy of these density-based solvers can meet the requirement of engineering and scientifc problems to capture aerothermal variables in diffusion boundary layer.
