An efficient and environment-friendly method for simultaneous determination of 13 typical derivatives of polycyclic aromatic hydrocarbon(PAH)in petroleum-polluted soil with nitro-,oxy-and alkylfunctional group was dev...An efficient and environment-friendly method for simultaneous determination of 13 typical derivatives of polycyclic aromatic hydrocarbon(PAH)in petroleum-polluted soil with nitro-,oxy-and alkylfunctional group was developed using supercritical fluid extraction(SFE)followed by ultra-high performance supercritical fluid chromatography(UHPSFC).Parameters of UHPSFC,including type of stationary phase and mobile phase modifiers,gradient elution process,backpressure,column temperature,and the flow rate of mobile phase,were systematically optimized,achieving a fast separation within4.2 min.Limits of detection(LOD)were 0.005-0.1μg mL^(-1)or 0.1-2.0 ng g^(-1),respectively,with a good repeatability(RSD<5.0%).Before UHPSFC-PDA analysis,the PAH-derivatives in soil samples were effectively enriched in 15.0 min using SFE with an online carbon nanotubes(CNTs)collection trap.The soil samples were analyzed by the proposed method and the results were verified by GC-MS.Thus,SFE equipped with an online CNTs trap followed by UHPSFC-PDA analysis,which only consumed about2.0 mL organic solvent for a whole run,has been demonstrated to be an efficient way for screening and quantitative analysis of trace-level PAH-derivatives in soil samples.展开更多
Aeroacoustic performance of fans is essential due to their widespread application. Therefore, the original aim of this paper is to evaluate the generated noise owing to different geometric parameters. In current study...Aeroacoustic performance of fans is essential due to their widespread application. Therefore, the original aim of this paper is to evaluate the generated noise owing to different geometric parameters. In current study, effect of five geometric parameters was investigated on well performance of a Bladeless fan. Airflow through this fan was analyzed simulating a Bladeless fan within a 2 m×2 m×4 m room. Analysis of the flow field inside the fan and evaluating its performance were obtained by solving conservations of mass and momentum equations for aerodynamic investigations and FW-H noise equations for aeroacoustic analysis. In order to design Bladeless fan Eppler 473 airfoil profile was used as the cross section of this fan. Five distinct parameters, namely height of cross section of the fan, outlet angle of the flow relative to the fan axis, thickness of airflow outlet slit, hydraulic diameter and aspect ratio for circular and quadratic cross sections were considered. Validating acoustic code results, we compared numerical solution of FW-H noise equations for NACA0012 with experimental results. FW-H model was selected to predict the noise generated by the Bladeless fan as the numerical results indicated a good agreement with experimental ones for NACA0012. To validate 3-D numerical results, the experimental results of a round jet showed good agreement with those simulation data. In order to indicate the effect of each mentioned parameter on the fan performance, SPL and OASPL diagrams were illustrated.展开更多
In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC ...In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC is not yet applied for drug quality control in the daily routine framework. Among the numerous reported SFC methods, none of them could be found to fully satisfy to all steps of the analytical method lifecycle. Thereby, the present contribution aims to provide an overview of the current and past achievements related to SFC techniques, with a targeted attention to this lifecycle and its successive steps. The included discussions were therefore structured accordingly and emphasizing the analytical method lifecycle in accord with the International Conference on Harmonisation (ICH). Recent and important scientific outputs in the field of analytical SFC, as well as instrumental evolution, qualification strategies, method development methodologies and discussions on the topic of method validation are reviewed.展开更多
Based on the engineering, geological and drilling fluid construction parameters of wells Shangu 101, Shangu 102 and Shan3 in Shangu block, the diameter of each well under each construction parameter is compared, and t...Based on the engineering, geological and drilling fluid construction parameters of wells Shangu 101, Shangu 102 and Shan3 in Shangu block, the diameter of each well under each construction parameter is compared, and the influence of engineering construction parameters, formation lithology and drilling fluid performance parameters on the diameter expansion rate is analyzed. Finally, the optimal drilling fluid system is obtained, through the appropriate displacement, the appropriate drilling engineering construction parameters, different drilling fluid parameters are selected for different formations and finally the purpose of reducing the wellbore enlargement rate is achieved.展开更多
A new concept of a supercritical water （SCW） circulating fiuidized bed reactor is proposed to produce hydrogen from coal/biomass gasification. The cyclone is a key component of the reactor system, in this paper, cyc...A new concept of a supercritical water （SCW） circulating fiuidized bed reactor is proposed to produce hydrogen from coal/biomass gasification. The cyclone is a key component of the reactor system, in this paper, cyclones with a single circular inlet （SCI） or a double circular inlet （DCI） were designed to adapt to the supercritical conditions. We evaluated the separation performance of the two cyclones using numerical simulations. A three-dimensional Reynolds stress model was used to simulate the turbulent flow of the fluid, and a stochastic Lagrangian model was used to simulate the particle motion. The flow fields of both cyclones were three-dimensionally unsteady and similar to those of traditional gas-solid cyclones. Secondary circulation phenomena were discovered and their influence on particle separation was estimated. Analyzing the distribution of the turbulence kinetic energy revealed that the most intensive turbulence existed in the zone near the vortex finder while the flow in the central part was relatively stable. The particle concentration distribution was non-uniform because of centrifugal forces. The distribution area can be divided into three parts according to the motion of the particles. In addition, the separation efficiency of both cyclones increased with the inlet SCaN velocity. Because of its perturbance flow, the DCI separator had higher separation efficiency than the SCI separator under comparable simulations. However, this was at the expense of a higher pressure drop across the cyclone.展开更多
基金financially supported by the National Natural Science Foundation of China(No.21874153)Science Foundation of China University of Petroleum,Beijing(No.2462017BJB09)PetroChina Innovation Foundation(No.2016D-5007-0402)。
文摘An efficient and environment-friendly method for simultaneous determination of 13 typical derivatives of polycyclic aromatic hydrocarbon(PAH)in petroleum-polluted soil with nitro-,oxy-and alkylfunctional group was developed using supercritical fluid extraction(SFE)followed by ultra-high performance supercritical fluid chromatography(UHPSFC).Parameters of UHPSFC,including type of stationary phase and mobile phase modifiers,gradient elution process,backpressure,column temperature,and the flow rate of mobile phase,were systematically optimized,achieving a fast separation within4.2 min.Limits of detection(LOD)were 0.005-0.1μg mL^(-1)or 0.1-2.0 ng g^(-1),respectively,with a good repeatability(RSD<5.0%).Before UHPSFC-PDA analysis,the PAH-derivatives in soil samples were effectively enriched in 15.0 min using SFE with an online carbon nanotubes(CNTs)collection trap.The soil samples were analyzed by the proposed method and the results were verified by GC-MS.Thus,SFE equipped with an online CNTs trap followed by UHPSFC-PDA analysis,which only consumed about2.0 mL organic solvent for a whole run,has been demonstrated to be an efficient way for screening and quantitative analysis of trace-level PAH-derivatives in soil samples.
文摘Aeroacoustic performance of fans is essential due to their widespread application. Therefore, the original aim of this paper is to evaluate the generated noise owing to different geometric parameters. In current study, effect of five geometric parameters was investigated on well performance of a Bladeless fan. Airflow through this fan was analyzed simulating a Bladeless fan within a 2 m×2 m×4 m room. Analysis of the flow field inside the fan and evaluating its performance were obtained by solving conservations of mass and momentum equations for aerodynamic investigations and FW-H noise equations for aeroacoustic analysis. In order to design Bladeless fan Eppler 473 airfoil profile was used as the cross section of this fan. Five distinct parameters, namely height of cross section of the fan, outlet angle of the flow relative to the fan axis, thickness of airflow outlet slit, hydraulic diameter and aspect ratio for circular and quadratic cross sections were considered. Validating acoustic code results, we compared numerical solution of FW-H noise equations for NACA0012 with experimental results. FW-H model was selected to predict the noise generated by the Bladeless fan as the numerical results indicated a good agreement with experimental ones for NACA0012. To validate 3-D numerical results, the experimental results of a round jet showed good agreement with those simulation data. In order to indicate the effect of each mentioned parameter on the fan performance, SPL and OASPL diagrams were illustrated.
文摘In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC is not yet applied for drug quality control in the daily routine framework. Among the numerous reported SFC methods, none of them could be found to fully satisfy to all steps of the analytical method lifecycle. Thereby, the present contribution aims to provide an overview of the current and past achievements related to SFC techniques, with a targeted attention to this lifecycle and its successive steps. The included discussions were therefore structured accordingly and emphasizing the analytical method lifecycle in accord with the International Conference on Harmonisation (ICH). Recent and important scientific outputs in the field of analytical SFC, as well as instrumental evolution, qualification strategies, method development methodologies and discussions on the topic of method validation are reviewed.
文摘Based on the engineering, geological and drilling fluid construction parameters of wells Shangu 101, Shangu 102 and Shan3 in Shangu block, the diameter of each well under each construction parameter is compared, and the influence of engineering construction parameters, formation lithology and drilling fluid performance parameters on the diameter expansion rate is analyzed. Finally, the optimal drilling fluid system is obtained, through the appropriate displacement, the appropriate drilling engineering construction parameters, different drilling fluid parameters are selected for different formations and finally the purpose of reducing the wellbore enlargement rate is achieved.
文摘A new concept of a supercritical water （SCW） circulating fiuidized bed reactor is proposed to produce hydrogen from coal/biomass gasification. The cyclone is a key component of the reactor system, in this paper, cyclones with a single circular inlet （SCI） or a double circular inlet （DCI） were designed to adapt to the supercritical conditions. We evaluated the separation performance of the two cyclones using numerical simulations. A three-dimensional Reynolds stress model was used to simulate the turbulent flow of the fluid, and a stochastic Lagrangian model was used to simulate the particle motion. The flow fields of both cyclones were three-dimensionally unsteady and similar to those of traditional gas-solid cyclones. Secondary circulation phenomena were discovered and their influence on particle separation was estimated. Analyzing the distribution of the turbulence kinetic energy revealed that the most intensive turbulence existed in the zone near the vortex finder while the flow in the central part was relatively stable. The particle concentration distribution was non-uniform because of centrifugal forces. The distribution area can be divided into three parts according to the motion of the particles. In addition, the separation efficiency of both cyclones increased with the inlet SCaN velocity. Because of its perturbance flow, the DCI separator had higher separation efficiency than the SCI separator under comparable simulations. However, this was at the expense of a higher pressure drop across the cyclone.
