As a core power device in strategic industries such as new energy power generation and electric vehicles,the thermal reliability of IGBT modules directly determines the performance and lifetime of the whole system.A s...As a core power device in strategic industries such as new energy power generation and electric vehicles,the thermal reliability of IGBT modules directly determines the performance and lifetime of the whole system.A synergistic optimization structure of“inlet plate-channel spoiler columns”is proposed for the local hot spot problem during the operation of Insulated Gate Bipolar Transistor(IGBT),combined with the inherent defect of uneven flow distribution of the traditional U-type liquid cooling plate in this paper.The influences of the shape,height(H),and spacing from the spoiler column(b)of the plate on the comprehensive heat dissipation performance of the liquid cooling plate are analyzed at different Reynolds numbers,A dual heat source strategy is introduced and the effect of the optimized structure is evaluated by the temperature inhomogeneity coefficient(Φ).The results show that the optimum effect is achieved when the shape of the plate is square,H=4.5 mm,b=2 mm,and u=0.05 m/s,at which the HTPE=1.09 and Φ are reduced by 40%.In contrast,the maximum temperatures of the IGBT and the FWD(Free Wheeling Diode)chips are reduced by 8.7 and 8.4 K,respectively,and ΔP rises by only 1.58 Pa while keeping ΔT not significantly increased.This optimized configuration achieves a significant reduction in the critical chip temperature and optimization of the flow field uniformity with almost no change in the system flow resistance.It breaks through the limitation of single structure optimization of the traditional liquid cooling plate and effectively solves the problem of uneven flow in the U-shaped cooling plate,which provides a new solution with important engineering value for the thermal management of IGBT modules.展开更多
Diffusion of momentum gives rise to viscosity. This article presents a solution in the explicit form of the equation of the momentum diffusion for a viscous fluid flowing around a plate taking into account deceleratio...Diffusion of momentum gives rise to viscosity. This article presents a solution in the explicit form of the equation of the momentum diffusion for a viscous fluid flowing around a plate taking into account deceleration. Three characteristic regions of a viscous flow have been described: the mantle, the body of the boundary layer, the viscous sublayer. In the mantle, the effect of viscosity is significant at a considerable distance from the plate. The momentum diffusion is focused in the body of the boundary layer. The diffusion force that produces the momentum of force giving rise to eddies is localized in the viscous sublayer. At the beginning of the plate, a moment of force twists the liquid along the flow, creating eddies that roll along the plate. For this reason, they are pressed against the surface of the plate. But at some distance from the beginning of the plate, the moment of force changes its orientation to the opposite and twists the vortices in the opposite direction, causing the vortices to roll along the plate against the flow. This causes the liquid to detach from the surface of the plate. This is the beginning of turbulence. The diameter of the vortex produced in the viscous sublayer is small being of the order of the thickness of the viscous sublayer. The vortex possesses a large angular velocity. Due to the momentum diffusion and the effect of the eddies combined in passing along the plate, its diameter increases up to the size of the thickness of the boundary layer and even more, whereas its angular velocity decreases down to the values really observed. The value of the critical Reynolds number of the transition from the laminar flow to the turbulent one has been found, and it agrees with the experimental data. The value of the shear stress produced by the viscous fluid on the plate surface has also been obtained. The way of measurement of the friction coefficient characterizing the effect of the plate on the flow has been proposed. It has been shown that the boundary condition of adhesion to the surface of a body flown around, that is applied in the estimation of viscous flows, contradicts the real processes of the flow.展开更多
The vibrational power flow in the beam-plate assemblies and then with the isolators is investigated using analytical ' power flow' approach based on the some concepts of mechanical mo- bility and structural dy...The vibrational power flow in the beam-plate assemblies and then with the isolators is investigated using analytical ' power flow' approach based on the some concepts of mechanical mo- bility and structural dynamics. Theoretical expressions of the power flow in the structures are given and examined. The numerical results of the expressions are good agreements with the measuring re- sults obtained by the technique of vibration intensity. On the basis of these results, possible ways of reducing the vibrational power flow in the structures are suggested .展开更多
This study describes a novel micro proton exchange membrane fuel cell(PEMFC)(active area,2.5 cm2).The flow field plate is manufactured by applying micro-electromechanical systems(MEMS) technology to silicon substrates...This study describes a novel micro proton exchange membrane fuel cell(PEMFC)(active area,2.5 cm2).The flow field plate is manufactured by applying micro-electromechanical systems(MEMS) technology to silicon substrates to etch flow channels without a gold-coating.Therefore,this investigation used MEMS technology for fabrication of a flow field plate and presents a novel fabrication procedure.Various operating parameters,such as fuel temperature and fuel stoichiometric flow rate,are tested to optimize micro PEMFC performance.A single micro PEMFC using MEMS technology reveals the ideal performance of the proposed fuel cell.The optimal power density approaches 232.75 mW·cm-1 when the fuel cell is operated at ambient condition with humidified,heated fuel.展开更多
Understanding the spatial and temporal dynamics of microbial communities in drinking water systems is vital to securing the microbial safety of drinking water.The objective of this study was to comprehensively charact...Understanding the spatial and temporal dynamics of microbial communities in drinking water systems is vital to securing the microbial safety of drinking water.The objective of this study was to comprehensively characterize the dynamics of microbial biomass and bacterial communities at each step of a full-scale drinking water treatment plant in Beijing,China.Both bulk water and biofilm samples on granular activated carbon（GAC） were collected over 9 months.The proportion of cultivable cells decreased during the treatment processes,and this proportion was higher in warm season than cool season,suggesting that treatment processes and water temperature probably had considerable impact on the R2 A cultivability of total bacteria.16 s rRNA gene based 454 pyrosequencing analysis of the bacterial community revealed that Proteobacteria predominated in all samples.The GAC biofilm harbored a distinct population with a much higher relative abundance of Acidobactena than water samples.Principle coordinate analysis and one-way analysis of similarity indicated that the dynamics of the microbial communities in bulk water and biofilm samples were better explained by the treatment processes rather than by sampling time,and distinctive changes of the microbial communities in water occurred after GAC filtration.Furthermore,20 distinct OTUs contributing most to the dissimilarity among samples of different sampling locations and 6 persistent OTUs present in the entire treatment process flow were identified.Overall,our findings demonstrate the significant effects that treatment processes have on the microbial biomass and community fluctuation and provide implications for further targeted investigation on particular bacteria populations.展开更多
This article deals with the evaluation of the consumption of energy for a steady state solvent extraction in a novel L-shaped pulsed sieve-plate column, which is highly required for design and optimization of the peri...This article deals with the evaluation of the consumption of energy for a steady state solvent extraction in a novel L-shaped pulsed sieve-plate column, which is highly required for design and optimization of the periodic flow processes for industrial applications. In this regard, a comprehensive evaluation on the energy consumption in case of a pulsed flow for three different chemical systems is conducted and besides the influence of pulsation intensity, the effect of geometrical parameters including the plate spacing and the plate free area is investigated as well. Moreover, the concept of characteristic velocity models at flooding points is evaluated with respect to the variation of pressure drop along the column at different operational conditions.展开更多
The formula of the vibration response and power flow in beam-stiffened plate with force excitation applied on.the plate, have been obtained by using the Steepest Descent Integral method. The characteristics of the pow...The formula of the vibration response and power flow in beam-stiffened plate with force excitation applied on.the plate, have been obtained by using the Steepest Descent Integral method. The characteristics of the power flow have been studied through computer simulation.It is shown that the stiffener acts as an extra lineal excitation applied on the plate and changes the characteristics of the power flow of the infinite plate greatly The greater the stiffness and the smaller the distance between the exciting point and the stiffener is, the greater the induence is. Lastly, experiments have been carried out by using the dualaccelerometer measurement technique that based on cross spectrum, and the test data agree well with the theoretical results展开更多
Vibrational power flow on combined plates with a change in mass and stiffness or with viscoelastic damping layer used widely in engineering is studied. The expressions of flexural displacement and other physical quan...Vibrational power flow on combined plates with a change in mass and stiffness or with viscoelastic damping layer used widely in engineering is studied. The expressions of flexural displacement and other physical quantities are obtained using Laplace transformation and transfer matrix approach, then influences of changes in mass and stiffness of discontinuous material and the free damping layer on the input power flow and the transmitted power flow are discussed. The conclusions provide theory basis for structural optimization design and reducing noise and vibration展开更多
基金supported by Tianjin Science and Technology Planning Project(22YDTPJC0020).
文摘As a core power device in strategic industries such as new energy power generation and electric vehicles,the thermal reliability of IGBT modules directly determines the performance and lifetime of the whole system.A synergistic optimization structure of“inlet plate-channel spoiler columns”is proposed for the local hot spot problem during the operation of Insulated Gate Bipolar Transistor(IGBT),combined with the inherent defect of uneven flow distribution of the traditional U-type liquid cooling plate in this paper.The influences of the shape,height(H),and spacing from the spoiler column(b)of the plate on the comprehensive heat dissipation performance of the liquid cooling plate are analyzed at different Reynolds numbers,A dual heat source strategy is introduced and the effect of the optimized structure is evaluated by the temperature inhomogeneity coefficient(Φ).The results show that the optimum effect is achieved when the shape of the plate is square,H=4.5 mm,b=2 mm,and u=0.05 m/s,at which the HTPE=1.09 and Φ are reduced by 40%.In contrast,the maximum temperatures of the IGBT and the FWD(Free Wheeling Diode)chips are reduced by 8.7 and 8.4 K,respectively,and ΔP rises by only 1.58 Pa while keeping ΔT not significantly increased.This optimized configuration achieves a significant reduction in the critical chip temperature and optimization of the flow field uniformity with almost no change in the system flow resistance.It breaks through the limitation of single structure optimization of the traditional liquid cooling plate and effectively solves the problem of uneven flow in the U-shaped cooling plate,which provides a new solution with important engineering value for the thermal management of IGBT modules.
文摘Diffusion of momentum gives rise to viscosity. This article presents a solution in the explicit form of the equation of the momentum diffusion for a viscous fluid flowing around a plate taking into account deceleration. Three characteristic regions of a viscous flow have been described: the mantle, the body of the boundary layer, the viscous sublayer. In the mantle, the effect of viscosity is significant at a considerable distance from the plate. The momentum diffusion is focused in the body of the boundary layer. The diffusion force that produces the momentum of force giving rise to eddies is localized in the viscous sublayer. At the beginning of the plate, a moment of force twists the liquid along the flow, creating eddies that roll along the plate. For this reason, they are pressed against the surface of the plate. But at some distance from the beginning of the plate, the moment of force changes its orientation to the opposite and twists the vortices in the opposite direction, causing the vortices to roll along the plate against the flow. This causes the liquid to detach from the surface of the plate. This is the beginning of turbulence. The diameter of the vortex produced in the viscous sublayer is small being of the order of the thickness of the viscous sublayer. The vortex possesses a large angular velocity. Due to the momentum diffusion and the effect of the eddies combined in passing along the plate, its diameter increases up to the size of the thickness of the boundary layer and even more, whereas its angular velocity decreases down to the values really observed. The value of the critical Reynolds number of the transition from the laminar flow to the turbulent one has been found, and it agrees with the experimental data. The value of the shear stress produced by the viscous fluid on the plate surface has also been obtained. The way of measurement of the friction coefficient characterizing the effect of the plate on the flow has been proposed. It has been shown that the boundary condition of adhesion to the surface of a body flown around, that is applied in the estimation of viscous flows, contradicts the real processes of the flow.
文摘The vibrational power flow in the beam-plate assemblies and then with the isolators is investigated using analytical ' power flow' approach based on the some concepts of mechanical mo- bility and structural dynamics. Theoretical expressions of the power flow in the structures are given and examined. The numerical results of the expressions are good agreements with the measuring re- sults obtained by the technique of vibration intensity. On the basis of these results, possible ways of reducing the vibrational power flow in the structures are suggested .
基金Supported by the National Science Council (NSC 97-2221-E-009-067)
文摘This study describes a novel micro proton exchange membrane fuel cell(PEMFC)(active area,2.5 cm2).The flow field plate is manufactured by applying micro-electromechanical systems(MEMS) technology to silicon substrates to etch flow channels without a gold-coating.Therefore,this investigation used MEMS technology for fabrication of a flow field plate and presents a novel fabrication procedure.Various operating parameters,such as fuel temperature and fuel stoichiometric flow rate,are tested to optimize micro PEMFC performance.A single micro PEMFC using MEMS technology reveals the ideal performance of the proposed fuel cell.The optimal power density approaches 232.75 mW·cm-1 when the fuel cell is operated at ambient condition with humidified,heated fuel.
基金supported by the China Major Science and Technology Program for Water Pollution Control and Treatment(No.2012ZX07404-002)the Special Fund of State Key Joint Laboratory of Environment Simulation and Pollution Control(No.14K09ESPCT)
文摘Understanding the spatial and temporal dynamics of microbial communities in drinking water systems is vital to securing the microbial safety of drinking water.The objective of this study was to comprehensively characterize the dynamics of microbial biomass and bacterial communities at each step of a full-scale drinking water treatment plant in Beijing,China.Both bulk water and biofilm samples on granular activated carbon（GAC） were collected over 9 months.The proportion of cultivable cells decreased during the treatment processes,and this proportion was higher in warm season than cool season,suggesting that treatment processes and water temperature probably had considerable impact on the R2 A cultivability of total bacteria.16 s rRNA gene based 454 pyrosequencing analysis of the bacterial community revealed that Proteobacteria predominated in all samples.The GAC biofilm harbored a distinct population with a much higher relative abundance of Acidobactena than water samples.Principle coordinate analysis and one-way analysis of similarity indicated that the dynamics of the microbial communities in bulk water and biofilm samples were better explained by the treatment processes rather than by sampling time,and distinctive changes of the microbial communities in water occurred after GAC filtration.Furthermore,20 distinct OTUs contributing most to the dissimilarity among samples of different sampling locations and 6 persistent OTUs present in the entire treatment process flow were identified.Overall,our findings demonstrate the significant effects that treatment processes have on the microbial biomass and community fluctuation and provide implications for further targeted investigation on particular bacteria populations.
基金School of Chemical Engineering, College of Engineering, University of Tehran, for the financial support
文摘This article deals with the evaluation of the consumption of energy for a steady state solvent extraction in a novel L-shaped pulsed sieve-plate column, which is highly required for design and optimization of the periodic flow processes for industrial applications. In this regard, a comprehensive evaluation on the energy consumption in case of a pulsed flow for three different chemical systems is conducted and besides the influence of pulsation intensity, the effect of geometrical parameters including the plate spacing and the plate free area is investigated as well. Moreover, the concept of characteristic velocity models at flooding points is evaluated with respect to the variation of pressure drop along the column at different operational conditions.
文摘The formula of the vibration response and power flow in beam-stiffened plate with force excitation applied on.the plate, have been obtained by using the Steepest Descent Integral method. The characteristics of the power flow have been studied through computer simulation.It is shown that the stiffener acts as an extra lineal excitation applied on the plate and changes the characteristics of the power flow of the infinite plate greatly The greater the stiffness and the smaller the distance between the exciting point and the stiffener is, the greater the induence is. Lastly, experiments have been carried out by using the dualaccelerometer measurement technique that based on cross spectrum, and the test data agree well with the theoretical results
文摘Vibrational power flow on combined plates with a change in mass and stiffness or with viscoelastic damping layer used widely in engineering is studied. The expressions of flexural displacement and other physical quantities are obtained using Laplace transformation and transfer matrix approach, then influences of changes in mass and stiffness of discontinuous material and the free damping layer on the input power flow and the transmitted power flow are discussed. The conclusions provide theory basis for structural optimization design and reducing noise and vibration
