Pressure oscillation in solid rocket motor is believed to be the results of the interaction between the flow instability and the acoustics of combustion chamber.Several reasonable and necessary hypothesizes are given ...Pressure oscillation in solid rocket motor is believed to be the results of the interaction between the flow instability and the acoustics of combustion chamber.Several reasonable and necessary hypothesizes are given to establish an equation to describe this coupling.A cold flow motor called CVS60D(corner vortex shedding 60°)was designed to study the flow-acoustic coupling based on theoretical analysis.Experimental investigations were carried out to determine the acoustics of CVS60D.Corner vortex shedding is generated at the backward facing step which is designed similar to the geometry of the motor with finocyl propellant after the burnout of its fins.A pintle was used to modify the velocity in the duct to change the frequency of vortex shedding.It is found that large amplitude pressure oscillation occurs when the pintle moves to a range of specific position,which indicates that the frequency of vortex shedding is close to one order of acoustic modes of combustion chamber.The amplitude of pressure oscillation changes as the pintle moves.展开更多
Core flow experiment is an important means of simulation experiments to evaluate the effect of displacing agent, but conventionally the internal characteristics in the core cannot be intuitively observed, and then som...Core flow experiment is an important means of simulation experiments to evaluate the effect of displacing agent, but conventionally the internal characteristics in the core cannot be intuitively observed, and then some important information can not be directly acquired by experiments. In this paper, a visualization method was used to detect the water-flooding process by using an improved low field nuclear magnetic resonance imaging（MRI） device, and the images describing the distribution of oil and water were collected. The experimental results show that the distribution of oil and water can be visually detected in an appropriate range of core porosity, and the end effect in many mechanics experiments is found to exist also in natural core flow test, and the influence range is about 0.004 m from the end of a 0.05752 m length natural core. The results also indicate that MRI is an effective tool to study the real time fluid distribution in natural core.展开更多
Low-speed flow experiments in which ultra-fine copper tubes are used to simulate micro-fractures in carbonate strata are conducted to analyze the variations of gas flow state in fractures of different fracture heights...Low-speed flow experiments in which ultra-fine copper tubes are used to simulate micro-fractures in carbonate strata are conducted to analyze the variations of gas flow state in fractures of different fracture heights,determine flow state transition limit and transition interval,and establish the calculation method of flow state transition limit.The results show that the ideal Hagen-Poiseuille flow is the main form of gas flow in large fractures.Due to the decrease of fracture height,the gas flow in the fracture changes from Hagen-Poiseuille flow with ideal smooth seam surface to non-Hagen-Poiseuille flow,and the critical point of the transition is the boundary of flow state transition.After the fracture height continues to decrease to a certain extent below the boundary of the flow state transition fracture height,the form of gas flow gradually changes to the ideal Darcy flow,thus the transition interval of the gas flow state in the closing process of fracture can be determined.Based on the three-dimensional microconvex body scanning of the fracture surface,the material properties of fracture and properties of fluid in the fracture,a method for calculating the boundary of flow state transition is established.The experimental test and theoretical calculation show that the limit of the fracture height for the transition from pipe flow to Darcy flow is about twice the sum of the maximum height of the microconvex bodies on the upper and lower sides of the fracture.展开更多
In vitro experimental set-up is an important tool for investigating abdominal aortic aneurysm (AAA). Accurate reproduction of the physiological pulsatile flow waveform in the abdominal aorta at various anatomic locati...In vitro experimental set-up is an important tool for investigating abdominal aortic aneurysm (AAA). Accurate reproduction of the physiological pulsatile flow waveform in the abdominal aorta at various anatomic locations is an important component of these experimental methods. The objective of this study is to establish an experimental set-up to generate a physiological pulsatile flow for in vitro simulations of the abdominal aorta. The physiological flow was established by a computer-controlled peristaltic pump and the flow field in a circular straight pipe is measured under pulsatile flow conditions by a 2-dimensional particle image velocimetry system (2D-PIV). Experimental results show that the in vitro experimental set-up provides a flow with a period of 2 s, a reasonable cross-sectional velocity distribution and an approximate inlet velocity profile that is close to the human abdominal aorta.展开更多
In order to investigate the data reliability of the core liquid permeability flow experiment evaluation test results, the uncertainty of the test results was evaluated. First of all, the core liquid permeability evalu...In order to investigate the data reliability of the core liquid permeability flow experiment evaluation test results, the uncertainty of the test results was evaluated. First of all, the core liquid permeability evaluation device is used to conduct a complete test according to the industry standard requirements. Then, according to the method in JJF 1059.1-2012 "Evaluation and Expression of Measurement Uncertainty", the known mathematical model is used to accurately identify and calculate each component causing uncertainty in the flow test process. The results show that the uncertainty component caused by mass weighing contributes the most to the combined standard uncertainty, followed by the uncertainty component caused by pressure measurement and the uncertainty component caused by the time flowing through the upper and lower scribing lines of the viscometer, and the accuracy grade of the measuring instrument also has a great influence on the evaluation result of the uncertainty.展开更多
An appropriate flow mode of electrolyte has a positive effect on process efficiency, surface roughness, and machining accuracy in the electrochemical machining（ECM） process. In this study, a new dynamic lateral flow...An appropriate flow mode of electrolyte has a positive effect on process efficiency, surface roughness, and machining accuracy in the electrochemical machining（ECM） process. In this study, a new dynamic lateral flow mode, in which the electrolyte flows from the leading edge to the trailing edge, was proposed in trepanning ECM of a diffuser. Then a numerical model of the channel was set up and simulated by using computational fluid dynamics software. The result showed that the distribution of the flow field was comparatively uniform in the inter-electrode gap. Furthermore, a fixture was designed to realize this new flow mode and then corresponding experiments were carried out. The experimental results illustrated that the feeding rate of the cathode reached 2 mm/min, the best taper angle was about 0.4°, and the best surface roughness was up to Ra= 0.115 lm. It reflects that this flow mode is suitable and effective, and can also be applied to machining other complex structures in trepanning ECM.展开更多
An experimental study of cavity oscillating flow carried out on subsonic wall jet facilities in an anechoic room is summarized. The jet exit Mach number range is from 0.2 to 0.8. The effects of the flow Mach number (...An experimental study of cavity oscillating flow carried out on subsonic wall jet facilities in an anechoic room is summarized. The jet exit Mach number range is from 0.2 to 0.8. The effects of the flow Mach number ( Ma ) and the cavity depth ( D ) on the oscillation are studied. It is found that for L/D =4, (shallow cavity), the oscillation is mainly due to the self exciting of the free shear layer above the cavity opening, for L/D =2, the acoustic resonance is responsible for the oscillation. Preliminary tests are performed to study the suppression effect of the leading edge tone excitation on cavity flow, and considerable reduction of oscillation has been achieved when Ma ≤0.6.展开更多
In this paper, the authors sum their research results about the effect of blood-letting of Jing (Well)-point on cerebral blood flow both in stroke patients and in experimental cerebral ischemia, cerebral hematoma and ...In this paper, the authors sum their research results about the effect of blood-letting of Jing (Well)-point on cerebral blood flow both in stroke patients and in experimental cerebral ischemia, cerebral hematoma and hypertension rabbits. In 30 cases of stroke (cerebral hemorrhage and cerebral infarction) patients, blood flow state of the anterior cerebral artery (ACA), middle cerebral artery (MCA) and the posterior cerebral artery (PCA), and the blood flow velocity of the bilateral vertebral artery (VA) and the basil artery (BA) are determined before and after pricking blood of the Twelve Jing-points. In experimental cerebral ischemia (by occlusion of the common carotid artery) rabbits, cerebral hematoma model rabbits and intravenous injection of noradrenaline induced hypertension rabbits, rheoencephalogram (REC) is detected before and after blood letting of the twelve "Jing"-points. In these 30 stroke patients, ultrasound Doppler examination’s results show that in 22 cases (73.33%) whose blood flow velocity decreases, after blood-letting of the 12 Jing-points, it increases significantly (P<0.01); in the rest 8 cases ( 26.67%) whose blood flow velocity speeds up, after treatment, it decreases evidently (P<0.01), showing a good dual-directional regulative effect of blood-letting therapy. In experimental cerebral ischemia rabbits, cerebral hematoma rabbits and hypertension rabbits whose REG lowers in the amplitude apparently (P<0.01), after blood letting stimulation of the 12 Jing-points, it increases at different degrees. Three patterns of stimulation as blood letting stimulation, pain stimulation and Jing-point stimulation, also the 3 factors of blood-letting therapy, may contribute to their effect on improvement of the cerebral blood flow. Somatic afferent nerve, sympathetic nerve of the vascular wall, central cholinergic nerve (M receptors) and adrenergic nerve (α receptors) participate in the effect of blood letting on cerebral blood flow.展开更多
A narrow annular test section of 1.5mm gap and 1800mm length was designed and manufactured, with good tightness and insulation. Experiments were carried out to investigate characteristics of flow instability of forced...A narrow annular test section of 1.5mm gap and 1800mm length was designed and manufactured, with good tightness and insulation. Experiments were carried out to investigate characteristics of flow instability of forced-convection in vertical narrow annuli. Using distilled water as work fluid, the experiments were conducted at pressures of 1.0~3.0MPa, mass flow rates of 3.0~25kg/h, heating power of 3.0~ 6.5kW and inlet fluid temperature of 20 oC, 40 oC or 60oC. It was found that flow instability occured with fixed inlet condition and heating power when mass flow rate was below a special value. Effects of inlet subcooling, system pressure and mass flow rate on the system behavior were studied and the instability region was given.展开更多
The behavior of Taylor-Couette （TC） flow has been extensively studied. However, no suitable torque prediction models exist for high-capacity fluid machinery. The Eckhardt-Grossmann-Lohse （EGL） theory, derived base...The behavior of Taylor-Couette （TC） flow has been extensively studied. However, no suitable torque prediction models exist for high-capacity fluid machinery. The Eckhardt-Grossmann-Lohse （EGL） theory, derived based on the Navier-Stokes equations, is proposed to model torque behavior. This are the significant energy theory suggests that surfaces transfer interfaces between cylinders and annular flow. This study mainly focuses on the effects of surface texture on momentum transfer behavior through global torque measurement. First, a power-law torque behavior model is built to reveal the relationship between dimensionless torque and the Taylor number based on the EGL theory. Second, TC flow appa- ratus is designed and built based on the CNC machine tool to verify the torque behavior model. Third, four surface texture films are tested to check the effects of surface texture on momentum transfer. A stereo microscope and three-dimensional topography instrument are employed to analyze surface morphology. Global torque behavior is measured by rotating a multi component dynamometer, and the effects of surface texture on the annular flow behavior are observed via images obtained using a high-speed camera. Finally, torque behaviors under four differentsurface conditions are fitted and compared. The experi- mental results indicate that surface textures have a remarkable influence on torque behavior, and that the peak roughness of surface texture enhances the momentum transfer by strengthening the fluctuation in the TC flow.展开更多
In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high i...In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high identification to discontinuity are used to the numerical reconstruction of part of an actual hemispherical blast-wave flow field by properly adjusting the moving bounary conditions of a piston. This method is simple and reliable. It is suitable to the evaluation of effects of the blast-wave flow field away from the explosion center.展开更多
The axial and tangential velocities of gas and particle phases and particle concentration for turbulent swirling and recirculating gas-particle (simulating gas-droplet) flows in a cold model of a dual-inlet sudden-exp...The axial and tangential velocities of gas and particle phases and particle concentration for turbulent swirling and recirculating gas-particle (simulating gas-droplet) flows in a cold model of a dual-inlet sudden-expansion combustor with partially tangential central tubes, proposed by the present authors, were measured by using a 2-D LDV system and a laser optic fiber system combined with a sampling probe. The results show that there are both gas and particle strongly reverse flows and swirling flows in the head part of the combustor. The velocity slip between gas and particle phases is remarkable. The particle concentration is higher near the wall and lower near the axis. There are two peaks in the concentration profiles near the inlet tubes. The above-obtained flow characteristics are favorable to ignition, flame stabilization and combustion. The results can also be used to validate the numerical modeling.展开更多
The effects of topography on baroclinic wave flows are studied experimentally in a thermally driven rotating annulus of fluid.Fourier analysis and complex principal component (CPC) analysis of the experimental data sh...The effects of topography on baroclinic wave flows are studied experimentally in a thermally driven rotating annulus of fluid.Fourier analysis and complex principal component (CPC) analysis of the experimental data show that, due to topographic forcing, the flow is bimodal rather than a single mode. Under suitable imposed experimental parameters, near thermal Rossby number ROT = 0.1 and Taylor number Ta = 2.2 × 107, the large-scale topography produces low-frequency oscillation in the flow and rather long-lived flow pattern resembling blocking in the atmospheric circulation. The 'blocking' phenomenon is caused by the resonance of travelling waves and the quasi-stationary waves forced by topography.The large-scale topography transforms wavenumber-homogeneous flows into wavenumber-dispersed flows, and the dispersed flows possess lower wavenumbers.展开更多
The Lucaogou Formation in Jimsar has a significant development potential due to its massive shale oil resources.Nevertheless,the complex and heterogeneous lithology,coupled with unclear flow mechanisms,poses a challen...The Lucaogou Formation in Jimsar has a significant development potential due to its massive shale oil resources.Nevertheless,the complex and heterogeneous lithology,coupled with unclear flow mechanisms,poses a challenge in effectively predicting its development potential.Therefore,it is crucial to clarify the flow characteristics of shale oil and its controlling factors.In this study,we used a flow simulation experiment to investigate the flow characteristics of different samples under various temperatures and confining stresses and quantitatively evaluated flow characteristics using threshold pressure gradient and total loss of flow rate.Additionally,by combining scanning electron microscopy and mercury intrusion capillary pressure techniques for pore structure characterization,and the relationship between microscopic pore structure and flow parameters was discussed.The findings indicate that rock composition and pore throat structure collaboratively control shale oil flow.Mesopores and macropores primarily develop between dolomite or albite,leading to well-developed pore throat structure with larger average throat radius,lower displacement pressure,and better reservoir quality,enhancing shale oil flowability.Dolomitic siltstone often exhibits these characteristics,making it a favorable lithology for shale oil flow.This study reveals the flow mechanism of shale oil under the action of reservoir physical properties,material compositions,temperatures and confining stresses,summarizes the geological characteristics of advantageous reservoirs.It provides theoretical support for layer selection and efficient development of shale oil reservoirs in the Lucaogou Formation of the Jimsar.展开更多
Effective control of hypersonic transition is essential.In order to avoid affecting the structural proflle of the aircraft,as well as reducing power consumption and electromagnetic interference,a low-frequency surface...Effective control of hypersonic transition is essential.In order to avoid affecting the structural proflle of the aircraft,as well as reducing power consumption and electromagnetic interference,a low-frequency surface arc plasma disturbance experiment to promote hypersonic transition was carried out in theΦ0.25 m double-throat Ludwieg tube wind tunnel at Huazhong University of Science and Technology.Contacting printed circuit board sensors and non-contact focused laser differential interferometry testing technology were used in combination.Experimental results showed that the low-frequency surface arc plasma actuation had obvious stimulation effects on the second-mode unstable wave and could promote boundary layer transition by changing the spectral characteristics of the second-mode unstable wave.At the same time,the plasma actuation could promote energy exchange between the second-mode unstable wave and other unstable waves.Finally,the corresponding control mechanism is discussed.展开更多
The study of buoyancy driven flow within bottom-heated vertical concentric cylindrical enclosure was important with respect to the processes in chemical and nuclear industries. In this research paper, experimental and...The study of buoyancy driven flow within bottom-heated vertical concentric cylindrical enclosure was important with respect to the processes in chemical and nuclear industries. In this research paper, experimental and numerical study of the axial temperature gradient and the heat transfer mechanism within the enclosure were performed. The numerical simulations were validated by comparing the numerical results with experimentally measured axial temperature. The numerical results of the streamlines within the enclosure depicted the real picture of the buoyancy effects. Eighteen different experiments were performed by using inner cylinder of different materials and outer cylinder of different diameters within the bottom disc temperature range of 353 - 433 K. The CFD simulations were performed to study the buoyancy effects within the enclosure. At the bottom disc with temperature up to 393 K, the streamlines within the inner cylinder were almost the same for both con- figurations being independent of outer cylinder diameter, while at 433 K streamlines within the inner cylinders varied. With larger diameter outer cylinder configuration, the buoyancy effects in the outer annulus were stronger as compared to smaller one.展开更多
The high temperature split Hopkinson pressure bar （SHPB） compression experiment is conducted to obtain the data relationship among strain, strain rate and flow stress from room temperature to 550 C for aeronautical ...The high temperature split Hopkinson pressure bar （SHPB） compression experiment is conducted to obtain the data relationship among strain, strain rate and flow stress from room temperature to 550 C for aeronautical aluminum alloy 7050-T7451. Combined high-speed orthogonal cutting experiments with the cutting process simulations, the data relationship of high temperature, high strain rate and large strain in high-speed cutting is modified. The Johnson-Cook empirical model considering the effects of strain hardening, strain rate hardening and thermal softening is selected to describe the data relationship in high-speed cutting, and the material constants of flow stress constitutive model for aluminum alloy 7050-T7451 are determined. Finally, the constitutive model of aluminum alloy 7050-T7451 is established through experiment and simulation verification in high-speed cutting. The model is proved to be reasonable by matching the measured values of the cutting force with the estimated results from FEM simulations.展开更多
基金Sponsored by the National Nature Science Foundation of China(10602047)
文摘Pressure oscillation in solid rocket motor is believed to be the results of the interaction between the flow instability and the acoustics of combustion chamber.Several reasonable and necessary hypothesizes are given to establish an equation to describe this coupling.A cold flow motor called CVS60D(corner vortex shedding 60°)was designed to study the flow-acoustic coupling based on theoretical analysis.Experimental investigations were carried out to determine the acoustics of CVS60D.Corner vortex shedding is generated at the backward facing step which is designed similar to the geometry of the motor with finocyl propellant after the burnout of its fins.A pintle was used to modify the velocity in the duct to change the frequency of vortex shedding.It is found that large amplitude pressure oscillation occurs when the pintle moves to a range of specific position,which indicates that the frequency of vortex shedding is close to one order of acoustic modes of combustion chamber.The amplitude of pressure oscillation changes as the pintle moves.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.50874071,51274136)the Chinese National Programs for High Technology Research and Development(Grant No.2008AA06Z201)+3 种基金the Shanghai Leading Academic Discipline Project(Grant No.S30106)the Excellent Academic Leading Person Program of Science and Technology Commission of Shanghai Municipality(Grant No.12XD1402500)the Shanghai Leading Talents Projectthe Key Program of Science and Technology Commission of Shanghai Municipality(Grant No.12160500200)
文摘Core flow experiment is an important means of simulation experiments to evaluate the effect of displacing agent, but conventionally the internal characteristics in the core cannot be intuitively observed, and then some important information can not be directly acquired by experiments. In this paper, a visualization method was used to detect the water-flooding process by using an improved low field nuclear magnetic resonance imaging（MRI） device, and the images describing the distribution of oil and water were collected. The experimental results show that the distribution of oil and water can be visually detected in an appropriate range of core porosity, and the end effect in many mechanics experiments is found to exist also in natural core flow test, and the influence range is about 0.004 m from the end of a 0.05752 m length natural core. The results also indicate that MRI is an effective tool to study the real time fluid distribution in natural core.
基金Supported by the Science and Technology Cooperation Project of the CNPC-SWPU Innovation Alliance(2020CX010401)。
文摘Low-speed flow experiments in which ultra-fine copper tubes are used to simulate micro-fractures in carbonate strata are conducted to analyze the variations of gas flow state in fractures of different fracture heights,determine flow state transition limit and transition interval,and establish the calculation method of flow state transition limit.The results show that the ideal Hagen-Poiseuille flow is the main form of gas flow in large fractures.Due to the decrease of fracture height,the gas flow in the fracture changes from Hagen-Poiseuille flow with ideal smooth seam surface to non-Hagen-Poiseuille flow,and the critical point of the transition is the boundary of flow state transition.After the fracture height continues to decrease to a certain extent below the boundary of the flow state transition fracture height,the form of gas flow gradually changes to the ideal Darcy flow,thus the transition interval of the gas flow state in the closing process of fracture can be determined.Based on the three-dimensional microconvex body scanning of the fracture surface,the material properties of fracture and properties of fluid in the fracture,a method for calculating the boundary of flow state transition is established.The experimental test and theoretical calculation show that the limit of the fracture height for the transition from pipe flow to Darcy flow is about twice the sum of the maximum height of the microconvex bodies on the upper and lower sides of the fracture.
文摘In vitro experimental set-up is an important tool for investigating abdominal aortic aneurysm (AAA). Accurate reproduction of the physiological pulsatile flow waveform in the abdominal aorta at various anatomic locations is an important component of these experimental methods. The objective of this study is to establish an experimental set-up to generate a physiological pulsatile flow for in vitro simulations of the abdominal aorta. The physiological flow was established by a computer-controlled peristaltic pump and the flow field in a circular straight pipe is measured under pulsatile flow conditions by a 2-dimensional particle image velocimetry system (2D-PIV). Experimental results show that the in vitro experimental set-up provides a flow with a period of 2 s, a reasonable cross-sectional velocity distribution and an approximate inlet velocity profile that is close to the human abdominal aorta.
文摘In order to investigate the data reliability of the core liquid permeability flow experiment evaluation test results, the uncertainty of the test results was evaluated. First of all, the core liquid permeability evaluation device is used to conduct a complete test according to the industry standard requirements. Then, according to the method in JJF 1059.1-2012 "Evaluation and Expression of Measurement Uncertainty", the known mathematical model is used to accurately identify and calculate each component causing uncertainty in the flow test process. The results show that the uncertainty component caused by mass weighing contributes the most to the combined standard uncertainty, followed by the uncertainty component caused by pressure measurement and the uncertainty component caused by the time flowing through the upper and lower scribing lines of the viscometer, and the accuracy grade of the measuring instrument also has a great influence on the evaluation result of the uncertainty.
基金co-supported by the National Natural Science Foundation of China (51675271)–ChinaKey Project of Jiangsu Provincial Research and Development (BE2015160)–ChinaFundamental Research Funds for the Central Universities (NE 2017003)–China
文摘An appropriate flow mode of electrolyte has a positive effect on process efficiency, surface roughness, and machining accuracy in the electrochemical machining（ECM） process. In this study, a new dynamic lateral flow mode, in which the electrolyte flows from the leading edge to the trailing edge, was proposed in trepanning ECM of a diffuser. Then a numerical model of the channel was set up and simulated by using computational fluid dynamics software. The result showed that the distribution of the flow field was comparatively uniform in the inter-electrode gap. Furthermore, a fixture was designed to realize this new flow mode and then corresponding experiments were carried out. The experimental results illustrated that the feeding rate of the cathode reached 2 mm/min, the best taper angle was about 0.4°, and the best surface roughness was up to Ra= 0.115 lm. It reflects that this flow mode is suitable and effective, and can also be applied to machining other complex structures in trepanning ECM.
文摘An experimental study of cavity oscillating flow carried out on subsonic wall jet facilities in an anechoic room is summarized. The jet exit Mach number range is from 0.2 to 0.8. The effects of the flow Mach number ( Ma ) and the cavity depth ( D ) on the oscillation are studied. It is found that for L/D =4, (shallow cavity), the oscillation is mainly due to the self exciting of the free shear layer above the cavity opening, for L/D =2, the acoustic resonance is responsible for the oscillation. Preliminary tests are performed to study the suppression effect of the leading edge tone excitation on cavity flow, and considerable reduction of oscillation has been achieved when Ma ≤0.6.
文摘In this paper, the authors sum their research results about the effect of blood-letting of Jing (Well)-point on cerebral blood flow both in stroke patients and in experimental cerebral ischemia, cerebral hematoma and hypertension rabbits. In 30 cases of stroke (cerebral hemorrhage and cerebral infarction) patients, blood flow state of the anterior cerebral artery (ACA), middle cerebral artery (MCA) and the posterior cerebral artery (PCA), and the blood flow velocity of the bilateral vertebral artery (VA) and the basil artery (BA) are determined before and after pricking blood of the Twelve Jing-points. In experimental cerebral ischemia (by occlusion of the common carotid artery) rabbits, cerebral hematoma model rabbits and intravenous injection of noradrenaline induced hypertension rabbits, rheoencephalogram (REC) is detected before and after blood letting of the twelve "Jing"-points. In these 30 stroke patients, ultrasound Doppler examination’s results show that in 22 cases (73.33%) whose blood flow velocity decreases, after blood-letting of the 12 Jing-points, it increases significantly (P<0.01); in the rest 8 cases ( 26.67%) whose blood flow velocity speeds up, after treatment, it decreases evidently (P<0.01), showing a good dual-directional regulative effect of blood-letting therapy. In experimental cerebral ischemia rabbits, cerebral hematoma rabbits and hypertension rabbits whose REG lowers in the amplitude apparently (P<0.01), after blood letting stimulation of the 12 Jing-points, it increases at different degrees. Three patterns of stimulation as blood letting stimulation, pain stimulation and Jing-point stimulation, also the 3 factors of blood-letting therapy, may contribute to their effect on improvement of the cerebral blood flow. Somatic afferent nerve, sympathetic nerve of the vascular wall, central cholinergic nerve (M receptors) and adrenergic nerve (α receptors) participate in the effect of blood letting on cerebral blood flow.
文摘A narrow annular test section of 1.5mm gap and 1800mm length was designed and manufactured, with good tightness and insulation. Experiments were carried out to investigate characteristics of flow instability of forced-convection in vertical narrow annuli. Using distilled water as work fluid, the experiments were conducted at pressures of 1.0~3.0MPa, mass flow rates of 3.0~25kg/h, heating power of 3.0~ 6.5kW and inlet fluid temperature of 20 oC, 40 oC or 60oC. It was found that flow instability occured with fixed inlet condition and heating power when mass flow rate was below a special value. Effects of inlet subcooling, system pressure and mass flow rate on the system behavior were studied and the instability region was given.
基金Supported by National Programs for Fundamental Research and Development of China(Grant Nos.2009CB724308,2015CB057302)National Science and Technology Major Project of China(Grant No.2013ZX06002002-017)
文摘The behavior of Taylor-Couette （TC） flow has been extensively studied. However, no suitable torque prediction models exist for high-capacity fluid machinery. The Eckhardt-Grossmann-Lohse （EGL） theory, derived based on the Navier-Stokes equations, is proposed to model torque behavior. This are the significant energy theory suggests that surfaces transfer interfaces between cylinders and annular flow. This study mainly focuses on the effects of surface texture on momentum transfer behavior through global torque measurement. First, a power-law torque behavior model is built to reveal the relationship between dimensionless torque and the Taylor number based on the EGL theory. Second, TC flow appa- ratus is designed and built based on the CNC machine tool to verify the torque behavior model. Third, four surface texture films are tested to check the effects of surface texture on momentum transfer. A stereo microscope and three-dimensional topography instrument are employed to analyze surface morphology. Global torque behavior is measured by rotating a multi component dynamometer, and the effects of surface texture on the annular flow behavior are observed via images obtained using a high-speed camera. Finally, torque behaviors under four differentsurface conditions are fitted and compared. The experi- mental results indicate that surface textures have a remarkable influence on torque behavior, and that the peak roughness of surface texture enhances the momentum transfer by strengthening the fluctuation in the TC flow.
文摘In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high identification to discontinuity are used to the numerical reconstruction of part of an actual hemispherical blast-wave flow field by properly adjusting the moving bounary conditions of a piston. This method is simple and reliable. It is suitable to the evaluation of effects of the blast-wave flow field away from the explosion center.
基金F oundation of Astronautical Sci. & Tech.China(Project 90 -16 )
文摘The axial and tangential velocities of gas and particle phases and particle concentration for turbulent swirling and recirculating gas-particle (simulating gas-droplet) flows in a cold model of a dual-inlet sudden-expansion combustor with partially tangential central tubes, proposed by the present authors, were measured by using a 2-D LDV system and a laser optic fiber system combined with a sampling probe. The results show that there are both gas and particle strongly reverse flows and swirling flows in the head part of the combustor. The velocity slip between gas and particle phases is remarkable. The particle concentration is higher near the wall and lower near the axis. There are two peaks in the concentration profiles near the inlet tubes. The above-obtained flow characteristics are favorable to ignition, flame stabilization and combustion. The results can also be used to validate the numerical modeling.
基金This research was supported by the U.S. National Science Foundation Grants ATM-8709410 and ATM-8714674.
文摘The effects of topography on baroclinic wave flows are studied experimentally in a thermally driven rotating annulus of fluid.Fourier analysis and complex principal component (CPC) analysis of the experimental data show that, due to topographic forcing, the flow is bimodal rather than a single mode. Under suitable imposed experimental parameters, near thermal Rossby number ROT = 0.1 and Taylor number Ta = 2.2 × 107, the large-scale topography produces low-frequency oscillation in the flow and rather long-lived flow pattern resembling blocking in the atmospheric circulation. The 'blocking' phenomenon is caused by the resonance of travelling waves and the quasi-stationary waves forced by topography.The large-scale topography transforms wavenumber-homogeneous flows into wavenumber-dispersed flows, and the dispersed flows possess lower wavenumbers.
基金financially supported by the National Natural Science Foundation of China(No.41972123)the Support Plan for Outstanding Youth Innovation Team in Shandong Higher Education Institutions(No.2022KJ060)。
文摘The Lucaogou Formation in Jimsar has a significant development potential due to its massive shale oil resources.Nevertheless,the complex and heterogeneous lithology,coupled with unclear flow mechanisms,poses a challenge in effectively predicting its development potential.Therefore,it is crucial to clarify the flow characteristics of shale oil and its controlling factors.In this study,we used a flow simulation experiment to investigate the flow characteristics of different samples under various temperatures and confining stresses and quantitatively evaluated flow characteristics using threshold pressure gradient and total loss of flow rate.Additionally,by combining scanning electron microscopy and mercury intrusion capillary pressure techniques for pore structure characterization,and the relationship between microscopic pore structure and flow parameters was discussed.The findings indicate that rock composition and pore throat structure collaboratively control shale oil flow.Mesopores and macropores primarily develop between dolomite or albite,leading to well-developed pore throat structure with larger average throat radius,lower displacement pressure,and better reservoir quality,enhancing shale oil flowability.Dolomitic siltstone often exhibits these characteristics,making it a favorable lithology for shale oil flow.This study reveals the flow mechanism of shale oil under the action of reservoir physical properties,material compositions,temperatures and confining stresses,summarizes the geological characteristics of advantageous reservoirs.It provides theoretical support for layer selection and efficient development of shale oil reservoirs in the Lucaogou Formation of the Jimsar.
基金supported by National Science and Technology Major Project(No.J2019-II-0014-0035)。
文摘Effective control of hypersonic transition is essential.In order to avoid affecting the structural proflle of the aircraft,as well as reducing power consumption and electromagnetic interference,a low-frequency surface arc plasma disturbance experiment to promote hypersonic transition was carried out in theΦ0.25 m double-throat Ludwieg tube wind tunnel at Huazhong University of Science and Technology.Contacting printed circuit board sensors and non-contact focused laser differential interferometry testing technology were used in combination.Experimental results showed that the low-frequency surface arc plasma actuation had obvious stimulation effects on the second-mode unstable wave and could promote boundary layer transition by changing the spectral characteristics of the second-mode unstable wave.At the same time,the plasma actuation could promote energy exchange between the second-mode unstable wave and other unstable waves.Finally,the corresponding control mechanism is discussed.
文摘The study of buoyancy driven flow within bottom-heated vertical concentric cylindrical enclosure was important with respect to the processes in chemical and nuclear industries. In this research paper, experimental and numerical study of the axial temperature gradient and the heat transfer mechanism within the enclosure were performed. The numerical simulations were validated by comparing the numerical results with experimentally measured axial temperature. The numerical results of the streamlines within the enclosure depicted the real picture of the buoyancy effects. Eighteen different experiments were performed by using inner cylinder of different materials and outer cylinder of different diameters within the bottom disc temperature range of 353 - 433 K. The CFD simulations were performed to study the buoyancy effects within the enclosure. At the bottom disc with temperature up to 393 K, the streamlines within the inner cylinder were almost the same for both con- figurations being independent of outer cylinder diameter, while at 433 K streamlines within the inner cylinders varied. With larger diameter outer cylinder configuration, the buoyancy effects in the outer annulus were stronger as compared to smaller one.
文摘The high temperature split Hopkinson pressure bar （SHPB） compression experiment is conducted to obtain the data relationship among strain, strain rate and flow stress from room temperature to 550 C for aeronautical aluminum alloy 7050-T7451. Combined high-speed orthogonal cutting experiments with the cutting process simulations, the data relationship of high temperature, high strain rate and large strain in high-speed cutting is modified. The Johnson-Cook empirical model considering the effects of strain hardening, strain rate hardening and thermal softening is selected to describe the data relationship in high-speed cutting, and the material constants of flow stress constitutive model for aluminum alloy 7050-T7451 are determined. Finally, the constitutive model of aluminum alloy 7050-T7451 is established through experiment and simulation verification in high-speed cutting. The model is proved to be reasonable by matching the measured values of the cutting force with the estimated results from FEM simulations.
