The serrated flow behavior,known as the Portevin-Le Chatelier(PLC)effect,is commonly observed during high-temperature deformation.In this study,we report a serrated flow behavior in FeCoCrNiMo0.2 high-entropy alloy(HE...The serrated flow behavior,known as the Portevin-Le Chatelier(PLC)effect,is commonly observed during high-temperature deformation.In this study,we report a serrated flow behavior in FeCoCrNiMo0.2 high-entropy alloy(HEA),which is mediated by nano-twinning and phase transformation at cryogenic temperatures.During uniaxial tensile deformation at 77 K,the alloy exhibited the formation of high-density deformation nano-twinning,cross-twinning,stacking faults(SFs)and Lomer-Cottrell locks(L-C locks).Additionally,the lower stacking fault energy(SFE)at low temperatures promotes the formation of the 9R phase.The high-density twin boundaries effectively hinder dislocation movement,leading to the instability of plastic deformation and promoting the serrated flow behavior.Furthermore,the rapid and unstable transformation of the 9R phase contributes to the pronounced serrated flow behavior.Nano-twinning,SFs,cross-twinning,L-C locks and 9R phase collectively induce a dynamic Hall-Petch effect,enhancing the strength-ductility synergy and strain-hardening ability of deformed alloy at 77 K.Our work provides valuable insights into the mechanism of tensile deformation at cryogenic temperatures in single-phase FCC HEA.展开更多
The effects of rejuvenation heat treatment(RHT)on the serrated flow behavior and fracture mode of nickel-based superalloys(R26)were investigated by tensile tests and microstructural characterization.The serrated flow ...The effects of rejuvenation heat treatment(RHT)on the serrated flow behavior and fracture mode of nickel-based superalloys(R26)were investigated by tensile tests and microstructural characterization.The serrated flow activation energies were determined to be 41−72 and 64−81 kJ/mol before and after RHT,respectively.Dynamic strain aging in the alloy is caused by the diffusion of carbon atoms into dislocation channels in the nickel matrix.Before RHT,carbides are concentrated at the grain boundaries.Cracks initiate from these carbides and propagate along the grain boundaries.RHT dissolves carbides at grain boundaries,transferring crack initiation to the precipitated phase group in the grains.RHT increases carbon atom concentration in the nickel matrix,enhancing dynamic strain aging and serrated flow behavior.展开更多
The influence of the slip mode on the microstructure evolution and compressive flow behavior at different strains in an extruded dilute Mg−0.5Bi−0.5Sn−0.5Mn alloy was analyzed through electron backscatter diffraction,...The influence of the slip mode on the microstructure evolution and compressive flow behavior at different strains in an extruded dilute Mg−0.5Bi−0.5Sn−0.5Mn alloy was analyzed through electron backscatter diffraction,X-ray diffraction,transmission electron microscopy,and hot compression tests.The results showed that at a low strain of 0.05,the basal,pyramidaland<c+a>slip modes were simultaneously activated.Nevertheless,at the middle stage of deformation(strain of 0.1,0.2 and 0.5),theslip mode was difficult to be activated and<c+a>slip mode became dominant.The deformation process between strains of 0.2 and 0.5 was primarily characterized by the softening effect resulting from the simultaneous occurrence of continuous dynamic recrystallization and discontinuous dynamic recrystallization.Ultimately,at strain of 0.8,a dynamic equilibrium was established,with the flow stress remaining constant due to the interplay between the dynamic softening brought about by discontinuous dynamic recrystallization and the work-hardening effect induced by the activation of the basalslip mode.展开更多
Flow behavior and microstructure of a homogenized ZK60 magnesium alloy were investigated during compression in the temperature range of 250-400 ℃ and the strain rate range of 0.1-50 s^-1. The results showed that dyna...Flow behavior and microstructure of a homogenized ZK60 magnesium alloy were investigated during compression in the temperature range of 250-400 ℃ and the strain rate range of 0.1-50 s^-1. The results showed that dynamic recrystallization （DRX） developed mainly at grain boundaries at lower strain rate （0.1-1 s^-1）, while in the case of higher strain rate （10-50 s^-1）, DRX occurred extensively both at twins and grain boundaries at all temperature range, especially at temperature lower than 350 ℃, which resulted in a more homogeneous microstructure than that under other deformation conditions. The DRX extent determines the hot workability of the workpiece, therefore, hot deformation at the strain rate of 10-50 s^-1 and in the temperature range of 250-350 ℃ was desirable for ZK60 alloy. Twin induced DRX during high strain rate compression included three steps. Firstly, twins with high dislocation subdivided the initial grain, then dislocation arrays subdivided the twins into subgrains, and after that DRX took place with a further increase of strain.展开更多
To investigate the flow behaviors of different size particles in hydrocyclone,a designed process was numerically simulated by the transient solver,where the quartz particles possessing a size distribution were injecte...To investigate the flow behaviors of different size particles in hydrocyclone,a designed process was numerically simulated by the transient solver,where the quartz particles possessing a size distribution were injected into a 100 mm diameter hydrocyclone with the steady water field and air core inside.A lab experimental work has validated the chosen models in simulation by comparing the classification efficiency results.The simulated process shows that the 25 μm quartz particles,close to the cut size,need much more time than the finer and coarser particles to reach the steady flow rate on the outlets of hydrocyclone.For the particles in the inner swirl,with the quartz size increasing from 5 to 25 μm,the particles take more time to enter the vortex finder.The 25 μm quartz particles move outward in the radial direction when they go up to the vortex finder,which is contrary to the quartz particles of 5 μm and 15 μm as they are closely surrounding the air core.The studies reveal that the flow behaviors of particles inside the hydrocyclone depend on the particle size.展开更多
This article presents a micro-macro unified model for predicting the deformation of metal matrix composites （MMCs）. A macro-scale model is developed to obtain the proper boundary conditions for the micro-scale model...This article presents a micro-macro unified model for predicting the deformation of metal matrix composites （MMCs）. A macro-scale model is developed to obtain the proper boundary conditions for the micro-scale model, which is used to assess the microstructural deformation of materials. The usage of the submodel technique in the analysis makes it possible to shed light on the stress and strain field at the microlevel. This is helpful to investigate the linkage between the microscopic and the macroscopic flow behavior of the composites. An iterative procedure is also proposed to find out the optimum parameters. The results show that the convergence can be attained after three iterations in computation. In order to demonstrate the reliability of mi- cro-macro unified model, results based on the continuum composite model are also investigated using the stress-strain relation of composite obtained from the iterations. By comparing the proposed unified model to the continuum composite model, it is clear that the former exhibits large plastic deformation in the case of little macroscopic deformation, and the stresses and strains obtained from the submodel are higher than those from the macroscopic deformation.展开更多
High-strength β titanium alloys represented by near β titanium alloy and metastable β titanium alloy are preferred materials for large-scale load-carrying structures.In order to achieve the precise regulation of mi...High-strength β titanium alloys represented by near β titanium alloy and metastable β titanium alloy are preferred materials for large-scale load-carrying structures.In order to achieve the precise regulation of microstructure in the deformation process, massive efforts have been made to study the flow behavior and microstructure evolution of βtitanium alloy in the hot deformation process. This paper reviews the flow behavior of high-strength titanium alloy,including the effects of initial microstructure, deformation process parameters, work hardening, and dynamic softening on flow stress. Furthermore, the effects of deformation process parameters on the apparent activation energy for deformation and strain rate sensitivity coefficient are analyzed. The discontinuous yield phenomenon is discussed,and the constitutive models of flow stress are summarized.Furthermore, some microstructural evolution models are reviewed. Finally, the development direction and difficulties of the flow behavior and constitutive model are pointed out.展开更多
By electrical resistance tomography (ERT) the cross sectional profiles of gas hold-up in a φ56mm bubble column are obtained with four designs of gas sparger. The effect of sparger geometry on the bubble distribution ...By electrical resistance tomography (ERT) the cross sectional profiles of gas hold-up in a φ56mm bubble column are obtained with four designs of gas sparger. The effect of sparger geometry on the bubble distribution is re-vealed by applying a sensitivity conjugated gradients reconstruction method (SCG). Experimental results show that over-all hold-up obtained by ERT is generally in good agreement with those measured with the pressure transducer and the ERT system produces informative evidence that the radial profiles of hold-up is very similar to the sparger design in the lower section of bubble column. Meanwhile, the rise velocity of bubble swarm and the Sauter mean bubble size are evaluated using ERT based on dynamic gas disengagement theory. The experimental results are in good agreement with correlations and conventional estimation obtained using pressure transmitter methods.展开更多
Conventional friction stir welding(FSW)and ultrasonic assisted friction stir welding(UAFSW)were employed to weld 6-mm thick 7 N01-T4 aluminum alloy plates.Weld forming characteristics and material flow behavior in the...Conventional friction stir welding(FSW)and ultrasonic assisted friction stir welding(UAFSW)were employed to weld 6-mm thick 7 N01-T4 aluminum alloy plates.Weld forming characteristics and material flow behavior in these two different welding processes were studied and compared.Ultrasonic vibration was applied directly on the weld in axial direction through the welding tool.Metal flow behavior,microstructure characteristics in the nugget zone(NZ)and evolution of the mechanical properties of naturally aged joints were studied.Results show that the ultrasonic vibration can significantly increase the welding speed of defect-free welded joint.At the rotation speed of 1200 rpm,the UAFSW can produce defect-free welded joints at a welding speed that is 50%higher than that of the conventional FSW.Ultrasonic vibrations can also improve surface quality of the joints and reduce axial force by 9%.Moreover,ultrasonic vibrations significantly increase the volume of the pin-driven zone(PDZ)and decrease the thickness of the transition zone(TZ).The number of subgrains and deformed grains resulting from the UAFSW is higher than that from the FSW.By increase the strain level and strain gradient in the NZ,the ultrasonic vibrations can refine the grains.Ultrasonic energy is the most at the top of the NZ,and gradually reduces along the thickness of the plate.The difference in strengths between the FSW and the UAFSW joints after post-weld natural aging(PWNA)is small.However,the elongation of the UAFSW is8.8%higher than that of the FSW(PWNA for 4320 h).Fracture surface observation demonstrates that all the specimens fail by ductile fracture,and the fracture position of the UAFSW joint changes from HAZ(PWNA for 120 h)to NZ(PWNA for 720 and 4320 h).展开更多
The thermomechanical behavior of precipitation-hardened aluminum alloy AA7022-T6 was studied using isothermal compression at temperatures of 623−773 K and strain rates of 0.01−1 s^−1.The experimental results indicated...The thermomechanical behavior of precipitation-hardened aluminum alloy AA7022-T6 was studied using isothermal compression at temperatures of 623−773 K and strain rates of 0.01−1 s^−1.The experimental results indicated that dynamic recrystallization(DRX)is a predominant hot deformation mechanism,especially at elevated temperatures and low strain rates.The modified Johnson−Cook(J−C)and the strain compensated Arrhenius-type models were developed to predict the hot flow behavior under different deformation conditions.The correlation coefficients of modified J−C model and the strain compensated Arrhenius-type models were 0.9914 and 0.9972,respectively,their average relative errors(ARE)were 6.074%and 4.465%,respectively,and their root mean square errors(RMSE)were 10.611 and 1.665 MPa,respectively,indicating that the strain compensated Arrhenius-type model can predict the hot flow stress of AA7022-T6 aluminum alloy with an appropriate accuracy.展开更多
Flow behaviors of four kinds of granular particles(i.e. sphere,ellipsoid,hexahedron and binary mixture of sphere and hexahedron) in rectangular hoppers were experimentally studied. The effects of granular shape and ho...Flow behaviors of four kinds of granular particles(i.e. sphere,ellipsoid,hexahedron and binary mixture of sphere and hexahedron) in rectangular hoppers were experimentally studied. The effects of granular shape and hopper structure on flow pattern,discharge fraction,mean particle residence time and tracer concentration distribu-tion were tested based on the visual observation and particle tracer technique. The results show that particle shape affects significantly the flow pattern. The flow patterns of sphere,ellipsoid and binary mixture are all parabolic shape,and the flow pattern shows no significant difference with the change of wedge angle. The flowing zone be-comes more sharp-angled with the increasing outlet size. The flow pattern of hexahedron is featured with straight lines. The discharge rates are in increasing order from hexahedron,sphere,binary mixture to ellipsoid. The dis-charge rate also increases with the wedge angle and outlet size. The mean particle residence time becomes shorter when the outlet size increases. The difference of mean particle residence time between the maximum and minimum values decreases as the wedge angle increases. The residence time of hexahedron is the shortest. The tracer concen-tration distribution of hexahedron at any height is more uniform than that of binary mixture. The tracer concentra-tion of sphere in the middle is lower than that near the wall,and the contrary tendency is found for ellipsoid particles.展开更多
A proper constitutive model was developed to predict the hot tensile flow behavior of IMI834 titanium alloy in α+β region. Hot tensile tests were performed at 800–1025 °C and 0.001–0.1 s&...A proper constitutive model was developed to predict the hot tensile flow behavior of IMI834 titanium alloy in α+β region. Hot tensile tests were performed at 800–1025 °C and 0.001–0.1 s<sup>−1</sup>. The constitutive model was developed through an Arrhenius-type equation at strains of 0.08–0.22 to characterize the hot tension behavior. It was found that the activation energies for hot tensile deformation of IMI834 titanium alloy are in the range of 519–557 kJ/mol at different strain values. The accuracy of predicted flow stress curves was evaluated using standard statistical parameters. These curves are appropriately found to be in good agreement with the experimental ones.展开更多
Ore particles,especially fine interlayers,commonly segregate in heap stacking,leading to undesirable flow paths and changeable flow velocity fields of packed beds.Computed tomography(CT),COMSOL Multiphysics,and MATLAB...Ore particles,especially fine interlayers,commonly segregate in heap stacking,leading to undesirable flow paths and changeable flow velocity fields of packed beds.Computed tomography(CT),COMSOL Multiphysics,and MATLAB were utilized to quantify pore structures and visualize flow behavior inside packed beds with segregated fine interlayers.The formation of fine interlayers was accompanied with the segregation of particles in packed beds.Fine particles reached the upper position of the packed beds during stacking.CT revealed that the average porosity of fine interlayers(24.21%)was significantly lower than that of the heap packed by coarse ores(37.42%),which directly affected the formation of flow paths.Specifically,the potential flow paths in the internal regions of fine interlayers were undeveloped.Fluid flowed and bypassed the fine interlayers and along the sides of the packed beds.Flow velocity also indicated that the flow paths easily gathered in the pore throat where flow velocity(1.8×10^-5 m/s)suddenly increased.Fluid stagnant regions with a flow velocity lower than 0.2×10^-5 m/s appeared in flow paths with a large diameter.展开更多
The flow behavior of pressure-driven water infiltration through graphene-based slit nanopores has been studied by molecular simulation.The simulated flow rate is close to the experimental values,which demonstrates the...The flow behavior of pressure-driven water infiltration through graphene-based slit nanopores has been studied by molecular simulation.The simulated flow rate is close to the experimental values,which demonstrates the reasonability of simulation results.Water molecules can spontaneously infiltrate into the nanopores,but an external driving force is generally required to pass through the whole pores.The exit of nanopore has a large obstruction on the water effusion.The flow velocity within the graphene nanochannels does not display monotonous dependence upon the pore width,indicating that the flow is related to the microscopic structures of water confined in the nanopores.Extensive structures of confined water are characterized in order to understand the flow behavior.This simulation improves the understanding of graphene-based nanofluidics,which helps in developing a new type of membrane separation technique.展开更多
This paper experimentally investigates the effect of surface roughness on flow and heat transfer characteristics in circular microchannels. All test pieces include 44 identical, parallel circular microchannels with di...This paper experimentally investigates the effect of surface roughness on flow and heat transfer characteristics in circular microchannels. All test pieces include 44 identical, parallel circular microchannels with diameters of 0.4 mm and 10 mm in length. The surface roughness of the microchannels is R= 0.86, 0.92, 1.02 lm, and the Reynolds number ranges from 150 to 2800.Results show that the surface roughness of the circular microchannels has remarkable effects on the performance of flow behavior and heat transfer. It is found that the Poiseuille and Nusselt numbers are higher when the relative surface roughness is larger. For flow behavior, the friction factor increases consistently with the increasing Reynolds number, and it is larger than the constant theoretical value for macrochannels. The Reynolds number for the transition from laminar to turbulent flow is about 1500, which is lower than the value for macrochannels. For the heat transfer property, Nusselt number also increases with increasing Reynolds number, and larger roughness contributes to higher Nusselt number.展开更多
The tensile and fracture behaviors of AA6061 alloy were investigated in order to provide quantitative data about this alloy at cryogenic temperatures.Specimens of AA6061 alloy were solution heat treated before tensile...The tensile and fracture behaviors of AA6061 alloy were investigated in order to provide quantitative data about this alloy at cryogenic temperatures.Specimens of AA6061 alloy were solution heat treated before tensile tests at 298,173 and 77 K and tested at strain rates in the range from 0.1 to 0.0001 s^(−1).The results indicate the suppression of the Portevin−Le Chatelier(PLC)effect and dynamic strain aging(DSA)at 77 K.In contrast,at 298 K,a remarkable serrated flow,characteristic of the PLC effect,is observed.Furthermore,the tensile behavior at 77 K,compared with that observed at 173 and 298 K,shows a simultaneous increase in strength,uniform elongation,modulus of toughness,strain-hardening exponent and strain rate sensitivity,which is related to a decrease in the dynamic recovery rate at low temperature.These responses are reflected on the fracture morphology,since the dimple size decreases at 77 K,while the area covered by dimples increases.Comparisons of the Johnson−Cook model show that a good agreement can be obtained for tests at 173 and 77 K,in which DSA is suppressed.展开更多
A three-dimensional finite volume model was established by the ANSYS FLUENT software to simulate the material flow behavior during the friction stir spot welding （FSSW） process. Effects of the full-threaded pin and ...A three-dimensional finite volume model was established by the ANSYS FLUENT software to simulate the material flow behavior during the friction stir spot welding （FSSW） process. Effects of the full-threaded pin and the reverse-threaded pin on the material flow behavior were mainly discussed. Results showed that the biggest material flow velocity appeared at the outer edge of the tool shoulder. The velocity value became smaller with the increase of the distance away from the tool surface. In general, material flows downwards along the pin thread when the full-threaded pin is used. Meanwhile, both the materials of the upper and the lower plates flow towards the lap interface along the pin thread when the reverse-threaded pin is used. The numerical simulation results were investigated by experiment, in which 2A12 aluminum alloy was used as the research object. The effective sheet thickness （EST） and stir zone （SZ） width of the joint by the reverse-threaded pin were much bigger than those by the full-threaded pin. Accordingly, cross tension failure load of the joint by the reverse-threaded pin is 23% bigger than the joint by the full-threaded pin.展开更多
The plastic flow behavior of the rotating band material is investigated in this paper. The rotating band material is processed from H96 brass alloy, which is hardened to a much higher yield strength compared to the an...The plastic flow behavior of the rotating band material is investigated in this paper. The rotating band material is processed from H96 brass alloy, which is hardened to a much higher yield strength compared to the annealed one. The dynamically uniaxial compression behavior of the material is tested using the split Hopkinson pressure bar(SHPB) with temperature and strain rate ranging from 297 to 1073 K and500 to 3000 s^(-1), respectively, and a phenomenological plastic flow stress model is developed to describe the mechanical behavior of the material. The material is found to present noticeable temperature sensitivity and weak strain-rate sensitivity. The construction of the plastic flow stress model has two steps. Firstly, three univariate stress functions, taking plastic strain, plastic strain rate and temperature as independent variable, respectively, are proposed by fixing the other two variables. Then, as the three univariate functions describe the special cases of flow stress behavior under various conditions, the principle of stress compatibility is adopted to obtain the complete flow stress function. The numerical results show that the proposed plastic flow stress model is more suitable for the rotating band material than the existing well-known models.展开更多
To investigate the hot deformation behavior of powder-forged （P/F） Fe-0. 5C：-2Cu steel, the hot compres- sion tests were conducted at temperatures ranging from 900 to 1000 ℃ and strain rates from 0.1 to 10 s-1 usi...To investigate the hot deformation behavior of powder-forged （P/F） Fe-0. 5C：-2Cu steel, the hot compres- sion tests were conducted at temperatures ranging from 900 to 1000 ℃ and strain rates from 0.1 to 10 s-1 using Gleeble-1500 thermal simulator. The true stress-true strain curves at different temperatures and strain rates of P/F steel were obtained. It is found that dynamic recovery only occurs as strain rate is 10 s 1 at 900 ℃, and the dynamic recrystallization is the main softening mechanism. The flow stress increases with decreasing temperature and increas- ing strain rate. The experimental data are employed to develop constitutive equations on the basis of the Arrhenius- type equation by introducing the strain with nonlinear fitting. The flow stresses prediel：ed by the proposed constitu- tive equations are in good agreement with the experimental values, and the correlation coefficient （R2） and the aver- age absolute relative error （AARE） are 0. 995 25 and 3.07% respectively. These results indicate the proposed consti- tutive equations can effectively describe the hot deformation behavior of the material.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52474403,52364050 and 52301137)Guizhou Provincial Program on Commercialization of Scientific and Technological Achievements(No.[2023]001)+2 种基金Guizhou Province Science and Technology Project(No.[2022]050)Guiyang city Science and Technology Project(No.[2023]48-16)the Central Government in Guidance of Local Science and Technology Development Funds(No.[2024]032).
文摘The serrated flow behavior,known as the Portevin-Le Chatelier(PLC)effect,is commonly observed during high-temperature deformation.In this study,we report a serrated flow behavior in FeCoCrNiMo0.2 high-entropy alloy(HEA),which is mediated by nano-twinning and phase transformation at cryogenic temperatures.During uniaxial tensile deformation at 77 K,the alloy exhibited the formation of high-density deformation nano-twinning,cross-twinning,stacking faults(SFs)and Lomer-Cottrell locks(L-C locks).Additionally,the lower stacking fault energy(SFE)at low temperatures promotes the formation of the 9R phase.The high-density twin boundaries effectively hinder dislocation movement,leading to the instability of plastic deformation and promoting the serrated flow behavior.Furthermore,the rapid and unstable transformation of the 9R phase contributes to the pronounced serrated flow behavior.Nano-twinning,SFs,cross-twinning,L-C locks and 9R phase collectively induce a dynamic Hall-Petch effect,enhancing the strength-ductility synergy and strain-hardening ability of deformed alloy at 77 K.Our work provides valuable insights into the mechanism of tensile deformation at cryogenic temperatures in single-phase FCC HEA.
基金supported by the National Natural Science Foundation of China(No.52175286)the Tribology Science Fund of State Key Laboratory of Tribology in Advanced Equipment,Tsinghua University,China(No.SKLTKF20B16).
文摘The effects of rejuvenation heat treatment(RHT)on the serrated flow behavior and fracture mode of nickel-based superalloys(R26)were investigated by tensile tests and microstructural characterization.The serrated flow activation energies were determined to be 41−72 and 64−81 kJ/mol before and after RHT,respectively.Dynamic strain aging in the alloy is caused by the diffusion of carbon atoms into dislocation channels in the nickel matrix.Before RHT,carbides are concentrated at the grain boundaries.Cracks initiate from these carbides and propagate along the grain boundaries.RHT dissolves carbides at grain boundaries,transferring crack initiation to the precipitated phase group in the grains.RHT increases carbon atom concentration in the nickel matrix,enhancing dynamic strain aging and serrated flow behavior.
基金supported by the National Natural Science Foundation of China (No.51901153)Shanxi Scholarship Council of China (No.2019032)+2 种基金Natural Science Foundation of Shanxi Province,China (No.202103021224049)the Shanxi Zhejiang University New Materials and Chemical Research Institute Scientific Research Project,China (No.2022SX-TD025)the Open Project of Salt Lake Chemical Engineering Research Complex,Qinghai University,China (No.2023-DXSSKF-Z02)。
文摘The influence of the slip mode on the microstructure evolution and compressive flow behavior at different strains in an extruded dilute Mg−0.5Bi−0.5Sn−0.5Mn alloy was analyzed through electron backscatter diffraction,X-ray diffraction,transmission electron microscopy,and hot compression tests.The results showed that at a low strain of 0.05,the basal,pyramidaland<c+a>slip modes were simultaneously activated.Nevertheless,at the middle stage of deformation(strain of 0.1,0.2 and 0.5),theslip mode was difficult to be activated and<c+a>slip mode became dominant.The deformation process between strains of 0.2 and 0.5 was primarily characterized by the softening effect resulting from the simultaneous occurrence of continuous dynamic recrystallization and discontinuous dynamic recrystallization.Ultimately,at strain of 0.8,a dynamic equilibrium was established,with the flow stress remaining constant due to the interplay between the dynamic softening brought about by discontinuous dynamic recrystallization and the work-hardening effect induced by the activation of the basalslip mode.
基金Project (14JJ6047) supported by the Natural Science Foundation of Hunan Province,ChinaProject (51274092) supported by the National Natural Science Foundation of ChinaProject (20120161110040) supported by the Doctoral Program of Higher Education ofChina
文摘Flow behavior and microstructure of a homogenized ZK60 magnesium alloy were investigated during compression in the temperature range of 250-400 ℃ and the strain rate range of 0.1-50 s^-1. The results showed that dynamic recrystallization （DRX） developed mainly at grain boundaries at lower strain rate （0.1-1 s^-1）, while in the case of higher strain rate （10-50 s^-1）, DRX occurred extensively both at twins and grain boundaries at all temperature range, especially at temperature lower than 350 ℃, which resulted in a more homogeneous microstructure than that under other deformation conditions. The DRX extent determines the hot workability of the workpiece, therefore, hot deformation at the strain rate of 10-50 s^-1 and in the temperature range of 250-350 ℃ was desirable for ZK60 alloy. Twin induced DRX during high strain rate compression included three steps. Firstly, twins with high dislocation subdivided the initial grain, then dislocation arrays subdivided the twins into subgrains, and after that DRX took place with a further increase of strain.
基金Projects(2006BAB11B07,2007BAB15B01)supported by the National Science&Technology Pillar Program during the Eleventh Five-year Plan Period,ChinaProject(2011BAB05B01)supported by the National Science&Technology Pillar Program during the Twelfth Five-year Plan Period,China
文摘To investigate the flow behaviors of different size particles in hydrocyclone,a designed process was numerically simulated by the transient solver,where the quartz particles possessing a size distribution were injected into a 100 mm diameter hydrocyclone with the steady water field and air core inside.A lab experimental work has validated the chosen models in simulation by comparing the classification efficiency results.The simulated process shows that the 25 μm quartz particles,close to the cut size,need much more time than the finer and coarser particles to reach the steady flow rate on the outlets of hydrocyclone.For the particles in the inner swirl,with the quartz size increasing from 5 to 25 μm,the particles take more time to enter the vortex finder.The 25 μm quartz particles move outward in the radial direction when they go up to the vortex finder,which is contrary to the quartz particles of 5 μm and 15 μm as they are closely surrounding the air core.The studies reveal that the flow behaviors of particles inside the hydrocyclone depend on the particle size.
基金Aeronautical Basic Science Foundation of China (03H53048)
文摘This article presents a micro-macro unified model for predicting the deformation of metal matrix composites （MMCs）. A macro-scale model is developed to obtain the proper boundary conditions for the micro-scale model, which is used to assess the microstructural deformation of materials. The usage of the submodel technique in the analysis makes it possible to shed light on the stress and strain field at the microlevel. This is helpful to investigate the linkage between the microscopic and the macroscopic flow behavior of the composites. An iterative procedure is also proposed to find out the optimum parameters. The results show that the convergence can be attained after three iterations in computation. In order to demonstrate the reliability of mi- cro-macro unified model, results based on the continuum composite model are also investigated using the stress-strain relation of composite obtained from the iterations. By comparing the proposed unified model to the continuum composite model, it is clear that the former exhibits large plastic deformation in the case of little macroscopic deformation, and the stresses and strains obtained from the submodel are higher than those from the macroscopic deformation.
基金the project of National Key Laboratory for Precision Hot Processing of Metals,Harbin Institute of Technology(No.6142909190207)Shaanxi Key Laboratory of High-Performance Precision Forming Technology and Equipment(NSKL-HPFTE)(No.PETE-2019-KF01)。
文摘High-strength β titanium alloys represented by near β titanium alloy and metastable β titanium alloy are preferred materials for large-scale load-carrying structures.In order to achieve the precise regulation of microstructure in the deformation process, massive efforts have been made to study the flow behavior and microstructure evolution of βtitanium alloy in the hot deformation process. This paper reviews the flow behavior of high-strength titanium alloy,including the effects of initial microstructure, deformation process parameters, work hardening, and dynamic softening on flow stress. Furthermore, the effects of deformation process parameters on the apparent activation energy for deformation and strain rate sensitivity coefficient are analyzed. The discontinuous yield phenomenon is discussed,and the constitutive models of flow stress are summarized.Furthermore, some microstructural evolution models are reviewed. Finally, the development direction and difficulties of the flow behavior and constitutive model are pointed out.
文摘By electrical resistance tomography (ERT) the cross sectional profiles of gas hold-up in a φ56mm bubble column are obtained with four designs of gas sparger. The effect of sparger geometry on the bubble distribution is re-vealed by applying a sensitivity conjugated gradients reconstruction method (SCG). Experimental results show that over-all hold-up obtained by ERT is generally in good agreement with those measured with the pressure transducer and the ERT system produces informative evidence that the radial profiles of hold-up is very similar to the sparger design in the lower section of bubble column. Meanwhile, the rise velocity of bubble swarm and the Sauter mean bubble size are evaluated using ERT based on dynamic gas disengagement theory. The experimental results are in good agreement with correlations and conventional estimation obtained using pressure transmitter methods.
基金funded by the National Key Research and Development Program of China(No.2016YFB1200506–12)Project of Promoting Talents in Liaoning Province(No.XLYC1808038)。
文摘Conventional friction stir welding(FSW)and ultrasonic assisted friction stir welding(UAFSW)were employed to weld 6-mm thick 7 N01-T4 aluminum alloy plates.Weld forming characteristics and material flow behavior in these two different welding processes were studied and compared.Ultrasonic vibration was applied directly on the weld in axial direction through the welding tool.Metal flow behavior,microstructure characteristics in the nugget zone(NZ)and evolution of the mechanical properties of naturally aged joints were studied.Results show that the ultrasonic vibration can significantly increase the welding speed of defect-free welded joint.At the rotation speed of 1200 rpm,the UAFSW can produce defect-free welded joints at a welding speed that is 50%higher than that of the conventional FSW.Ultrasonic vibrations can also improve surface quality of the joints and reduce axial force by 9%.Moreover,ultrasonic vibrations significantly increase the volume of the pin-driven zone(PDZ)and decrease the thickness of the transition zone(TZ).The number of subgrains and deformed grains resulting from the UAFSW is higher than that from the FSW.By increase the strain level and strain gradient in the NZ,the ultrasonic vibrations can refine the grains.Ultrasonic energy is the most at the top of the NZ,and gradually reduces along the thickness of the plate.The difference in strengths between the FSW and the UAFSW joints after post-weld natural aging(PWNA)is small.However,the elongation of the UAFSW is8.8%higher than that of the FSW(PWNA for 4320 h).Fracture surface observation demonstrates that all the specimens fail by ductile fracture,and the fracture position of the UAFSW joint changes from HAZ(PWNA for 120 h)to NZ(PWNA for 720 and 4320 h).
文摘The thermomechanical behavior of precipitation-hardened aluminum alloy AA7022-T6 was studied using isothermal compression at temperatures of 623−773 K and strain rates of 0.01−1 s^−1.The experimental results indicated that dynamic recrystallization(DRX)is a predominant hot deformation mechanism,especially at elevated temperatures and low strain rates.The modified Johnson−Cook(J−C)and the strain compensated Arrhenius-type models were developed to predict the hot flow behavior under different deformation conditions.The correlation coefficients of modified J−C model and the strain compensated Arrhenius-type models were 0.9914 and 0.9972,respectively,their average relative errors(ARE)were 6.074%and 4.465%,respectively,and their root mean square errors(RMSE)were 10.611 and 1.665 MPa,respectively,indicating that the strain compensated Arrhenius-type model can predict the hot flow stress of AA7022-T6 aluminum alloy with an appropriate accuracy.
基金Supported by the National Natural Science Foundation of China （50706007 50976025） the National Key Program of Basic Research in China （2010CB732206）+1 种基金 the Foundation of Excellent Young Scholar of Southeast University （4003001039） the Collaboration Project of China and British （2010DFA61960）
文摘Flow behaviors of four kinds of granular particles(i.e. sphere,ellipsoid,hexahedron and binary mixture of sphere and hexahedron) in rectangular hoppers were experimentally studied. The effects of granular shape and hopper structure on flow pattern,discharge fraction,mean particle residence time and tracer concentration distribu-tion were tested based on the visual observation and particle tracer technique. The results show that particle shape affects significantly the flow pattern. The flow patterns of sphere,ellipsoid and binary mixture are all parabolic shape,and the flow pattern shows no significant difference with the change of wedge angle. The flowing zone be-comes more sharp-angled with the increasing outlet size. The flow pattern of hexahedron is featured with straight lines. The discharge rates are in increasing order from hexahedron,sphere,binary mixture to ellipsoid. The dis-charge rate also increases with the wedge angle and outlet size. The mean particle residence time becomes shorter when the outlet size increases. The difference of mean particle residence time between the maximum and minimum values decreases as the wedge angle increases. The residence time of hexahedron is the shortest. The tracer concen-tration distribution of hexahedron at any height is more uniform than that of binary mixture. The tracer concentra-tion of sphere in the middle is lower than that near the wall,and the contrary tendency is found for ellipsoid particles.
文摘A proper constitutive model was developed to predict the hot tensile flow behavior of IMI834 titanium alloy in α+β region. Hot tensile tests were performed at 800–1025 °C and 0.001–0.1 s<sup>−1</sup>. The constitutive model was developed through an Arrhenius-type equation at strains of 0.08–0.22 to characterize the hot tension behavior. It was found that the activation energies for hot tensile deformation of IMI834 titanium alloy are in the range of 519–557 kJ/mol at different strain values. The accuracy of predicted flow stress curves was evaluated using standard statistical parameters. These curves are appropriately found to be in good agreement with the experimental ones.
基金financially supported by the National Science Fund for Excellent Young Scholars(No.51722401)the Fundamental Research Funds for the Central Universities(No.FRF-TP-18-003C1)the Key Program of the National Natural Science Foundation of China(No.51734001)。
文摘Ore particles,especially fine interlayers,commonly segregate in heap stacking,leading to undesirable flow paths and changeable flow velocity fields of packed beds.Computed tomography(CT),COMSOL Multiphysics,and MATLAB were utilized to quantify pore structures and visualize flow behavior inside packed beds with segregated fine interlayers.The formation of fine interlayers was accompanied with the segregation of particles in packed beds.Fine particles reached the upper position of the packed beds during stacking.CT revealed that the average porosity of fine interlayers(24.21%)was significantly lower than that of the heap packed by coarse ores(37.42%),which directly affected the formation of flow paths.Specifically,the potential flow paths in the internal regions of fine interlayers were undeveloped.Fluid flowed and bypassed the fine interlayers and along the sides of the packed beds.Flow velocity also indicated that the flow paths easily gathered in the pore throat where flow velocity(1.8×10^-5 m/s)suddenly increased.Fluid stagnant regions with a flow velocity lower than 0.2×10^-5 m/s appeared in flow paths with a large diameter.
基金Supported by the National Natural Science Foundation of China(21376116)A PAPD Project of Jiangsu Higher Education Institution
文摘The flow behavior of pressure-driven water infiltration through graphene-based slit nanopores has been studied by molecular simulation.The simulated flow rate is close to the experimental values,which demonstrates the reasonability of simulation results.Water molecules can spontaneously infiltrate into the nanopores,but an external driving force is generally required to pass through the whole pores.The exit of nanopore has a large obstruction on the water effusion.The flow velocity within the graphene nanochannels does not display monotonous dependence upon the pore width,indicating that the flow is related to the microscopic structures of water confined in the nanopores.Extensive structures of confined water are characterized in order to understand the flow behavior.This simulation improves the understanding of graphene-based nanofluidics,which helps in developing a new type of membrane separation technique.
文摘This paper experimentally investigates the effect of surface roughness on flow and heat transfer characteristics in circular microchannels. All test pieces include 44 identical, parallel circular microchannels with diameters of 0.4 mm and 10 mm in length. The surface roughness of the microchannels is R= 0.86, 0.92, 1.02 lm, and the Reynolds number ranges from 150 to 2800.Results show that the surface roughness of the circular microchannels has remarkable effects on the performance of flow behavior and heat transfer. It is found that the Poiseuille and Nusselt numbers are higher when the relative surface roughness is larger. For flow behavior, the friction factor increases consistently with the increasing Reynolds number, and it is larger than the constant theoretical value for macrochannels. The Reynolds number for the transition from laminar to turbulent flow is about 1500, which is lower than the value for macrochannels. For the heat transfer property, Nusselt number also increases with increasing Reynolds number, and larger roughness contributes to higher Nusselt number.
基金We would like to acknowledge the Sao Paulo Research Foundation(FAPESP)(Grant No.2014/15091-7 and 2016/10997-0)the Conselho Nacional de Desenvolvimento Científico e Tecnológico-Brazil(CNPq)(Grant No.449009/2014-9)This study was financed in part by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior-Brazil(CAPES)-Finance Code 001.Danielle Cristina Camilo MAGALHÃES acknowledges CNPq for her PhD scholarship(Grant No.153181/2013-3).
文摘The tensile and fracture behaviors of AA6061 alloy were investigated in order to provide quantitative data about this alloy at cryogenic temperatures.Specimens of AA6061 alloy were solution heat treated before tensile tests at 298,173 and 77 K and tested at strain rates in the range from 0.1 to 0.0001 s^(−1).The results indicate the suppression of the Portevin−Le Chatelier(PLC)effect and dynamic strain aging(DSA)at 77 K.In contrast,at 298 K,a remarkable serrated flow,characteristic of the PLC effect,is observed.Furthermore,the tensile behavior at 77 K,compared with that observed at 173 and 298 K,shows a simultaneous increase in strength,uniform elongation,modulus of toughness,strain-hardening exponent and strain rate sensitivity,which is related to a decrease in the dynamic recovery rate at low temperature.These responses are reflected on the fracture morphology,since the dimple size decreases at 77 K,while the area covered by dimples increases.Comparisons of the Johnson−Cook model show that a good agreement can be obtained for tests at 173 and 77 K,in which DSA is suppressed.
基金This work is supported by the National Natural Science Foundation of China （No. 51204111 ）, the Natural Science Foundation of Liaoning Province （ No. 2013024004 and No. 2014024008）.
文摘A three-dimensional finite volume model was established by the ANSYS FLUENT software to simulate the material flow behavior during the friction stir spot welding （FSSW） process. Effects of the full-threaded pin and the reverse-threaded pin on the material flow behavior were mainly discussed. Results showed that the biggest material flow velocity appeared at the outer edge of the tool shoulder. The velocity value became smaller with the increase of the distance away from the tool surface. In general, material flows downwards along the pin thread when the full-threaded pin is used. Meanwhile, both the materials of the upper and the lower plates flow towards the lap interface along the pin thread when the reverse-threaded pin is used. The numerical simulation results were investigated by experiment, in which 2A12 aluminum alloy was used as the research object. The effective sheet thickness （EST） and stir zone （SZ） width of the joint by the reverse-threaded pin were much bigger than those by the full-threaded pin. Accordingly, cross tension failure load of the joint by the reverse-threaded pin is 23% bigger than the joint by the full-threaded pin.
基金support from the National Natural Science Foundation of China(grant nos.51601062 and 51605159)the National Natural Science Foundation of Hunan(2018JJ3180).
基金the support from National Natural Science Foundation of China (Grant Nos. 11702137 and U2141246)。
文摘The plastic flow behavior of the rotating band material is investigated in this paper. The rotating band material is processed from H96 brass alloy, which is hardened to a much higher yield strength compared to the annealed one. The dynamically uniaxial compression behavior of the material is tested using the split Hopkinson pressure bar(SHPB) with temperature and strain rate ranging from 297 to 1073 K and500 to 3000 s^(-1), respectively, and a phenomenological plastic flow stress model is developed to describe the mechanical behavior of the material. The material is found to present noticeable temperature sensitivity and weak strain-rate sensitivity. The construction of the plastic flow stress model has two steps. Firstly, three univariate stress functions, taking plastic strain, plastic strain rate and temperature as independent variable, respectively, are proposed by fixing the other two variables. Then, as the three univariate functions describe the special cases of flow stress behavior under various conditions, the principle of stress compatibility is adopted to obtain the complete flow stress function. The numerical results show that the proposed plastic flow stress model is more suitable for the rotating band material than the existing well-known models.
基金the support received from Suzhou Kunlun Advanced Manufacturing Technologies and Equipment Co.,Ltd
文摘To investigate the hot deformation behavior of powder-forged （P/F） Fe-0. 5C：-2Cu steel, the hot compres- sion tests were conducted at temperatures ranging from 900 to 1000 ℃ and strain rates from 0.1 to 10 s-1 using Gleeble-1500 thermal simulator. The true stress-true strain curves at different temperatures and strain rates of P/F steel were obtained. It is found that dynamic recovery only occurs as strain rate is 10 s 1 at 900 ℃, and the dynamic recrystallization is the main softening mechanism. The flow stress increases with decreasing temperature and increas- ing strain rate. The experimental data are employed to develop constitutive equations on the basis of the Arrhenius- type equation by introducing the strain with nonlinear fitting. The flow stresses prediel：ed by the proposed constitu- tive equations are in good agreement with the experimental values, and the correlation coefficient （R2） and the aver- age absolute relative error （AARE） are 0. 995 25 and 3.07% respectively. These results indicate the proposed consti- tutive equations can effectively describe the hot deformation behavior of the material.
