From a life cycle perspective,the material flow analysis is utilized to investigate the lithium material flows in international trade from 2000 to 2019.The results reveal that at the global level,the total volume of l...From a life cycle perspective,the material flow analysis is utilized to investigate the lithium material flows in international trade from 2000 to 2019.The results reveal that at the global level,the total volume of lithium trade grew rapidly,reaching 121116 t in 2019.Lithium trade was dominated by lithium minerals,lithium carbonate and lithium hydroxide rather than final lithium products,indicating an immaturity in global lithium industry.At the intercontinental level,Asia’s import trade and Oceania’s export trade led the world,accounting for 81.22%and 39.68%,respectively.At the national level,China,Japan and Korea became the main importers,while Chile and Australia were the main exporters.In addition,China’s trade volume far exceeded that of the United States.China’s exports were dominated by lithium-ion batteries,while the United States mainly imported lithium-ion batteries,proving that the development of China’s lithium industry was relatively faster.展开更多
Wood,an essential natural resource in human civilization,remains widely used despite advances in technology and material substitution.The surge in greenhouse gas emissions and environmental concerns accentuates the ne...Wood,an essential natural resource in human civilization,remains widely used despite advances in technology and material substitution.The surge in greenhouse gas emissions and environmental concerns accentuates the need for optimizing wood utilization.Material flow analysis is a powerful tool for tracking material flows and stocks,aiding resource management and environmental decision-making.However,the full extent of its methodological dimensions,particularly within the context of the wood supply chain,remains relatively unexplored.In this study,we delve into the existing literature on wood flow analysis,discussing its primary objectives,materials involved,temporal and spatial scales,data sources,units,and conversion factors.Additionally,data uncertainty,data reconciliation and crucial assumptions in material flow analysis are highlighted in this paper.Key findings reveal the significance of wood cascading and substitution effects by replacing non-wood materials,where they can reduce greenhouse gas emissions more than the natural carbon sink of forests and wood products.The immediate impact of short-term wood cascading might not be as robust as the substitution effect,with energy substitution showcasing better results than material substitution.However,it's crucial to note that these conclusions could experience significant reversal from a long-term and global perspective.Strategies for improving wood efficiency involve maximizing material use,advancing construction technologies,extending product lifespans,promoting cascade use,and optimizing energy recovery processes.The study underscores the need for standardized approaches in wood flow analysis and emphasizes the potential of wood efficiency strategies in addressing environmental challenges.展开更多
Sulfur flow for new generation steel manufacturing process is analyzed by the method of material flow analysis, and measures for SO2 emission reduction are put forward as assessment and target intervention of the resu...Sulfur flow for new generation steel manufacturing process is analyzed by the method of material flow analysis, and measures for SO2 emission reduction are put forward as assessment and target intervention of the results. The results of sulfur flow analysis indicate that 90 % of sulfur comes from fuels. Sulfur finally discharges from the steel manufacturing route in various steps, and the main point is BF and BOF slag desulfurization. In sintering process, the sulfur is removed by gasification, and sintering process is the main source of SO2 emission. The sulfur content of coke oven gas （COG） is an important factor affecting SO2 emission. Therefore, SO2 emission reduction should be started from the optimization and integration of steel manufacturing route, sulfur burden should be reduced through energy saving and consumption reduction, and the sulfur content of fuel should be controlled. At the same time, BF and BOF slag desulfurization should be optimized further and coke oven gas and sintering exhausted gas desulfurization should be adopted for SO2 emission reduction and reuse of resource, to achieve harmonic coordination of economic, social, and environmental effects for sustainable development.展开更多
That flow is the common feature of substance flow and fluid flow is the viewpoint emphasized in the paper. Some notes on fluid mechanics, including the two approaches of fluid flow description, were given. The concept...That flow is the common feature of substance flow and fluid flow is the viewpoint emphasized in the paper. Some notes on fluid mechanics, including the two approaches of fluid flow description, were given. The concepts of the chain and the chain group of product life cycles, which are essential for understanding the specific features of substance flow, were advanced. Taking the specific feature of substance flow into consideration, on the analogy of the two approaches in fluid mechanics, two approaches of substance flow analysis, i.e. L method and E model, were formulated. Illustrative models of steady and unsteady substance flow were sketched by both methods, and comparison between them was made in general.展开更多
The metabolism of copper and arsenic in a copper pyrometallurgy process was studied through substance flow analysis method.The mass balance accounts and substance flow charts of copper and arsenic were established,ind...The metabolism of copper and arsenic in a copper pyrometallurgy process was studied through substance flow analysis method.The mass balance accounts and substance flow charts of copper and arsenic were established,indicators including direct recovery,waste recycle ratio,and resource efficiency were used to evaluate the metabolism efficiency of the system.The results showed that,the resource efficiency of copper was 97.58%,the direct recovery of copper in smelting,converting,and refining processes was 91.96%,97.13%and 99.47%,respectively.Meanwhile,for producing 1 t of copper,10 kg of arsenic was carried into the system,with the generation of 1.07 kg of arsenic in flotation tailing,8.50 kg of arsenic in arsenic waste residue,and 0.05 kg of arsenic in waste water.The distribution and transformation behaviors of arsenic in the smelting,converting,and refining processes were also analyzed,and some recommendations for improving copper resource efficiency and pollution control were proposed based on substance flow analysis.展开更多
With the structure of two air gaps and two rotors, the electromagnetic continuously variable transmission（EMCVT） is a novel power-split continuously variable transmission（CVT）. There are two kinds of power flowing...With the structure of two air gaps and two rotors, the electromagnetic continuously variable transmission（EMCVT） is a novel power-split continuously variable transmission（CVT）. There are two kinds of power flowing through the EMCVT, one is mechanical power and the other is electric power. In the mean time, there are three power ports in the EMCVT, one is the outer rotor named mechanical power port and the other two are the inner rotor and the stator named electric power ports. The mechanical power port is connected to the driving wheels through the final gear and the electric ports are connected to the batteries through the transducers. The two kinds of power are coupled on the outer rotor of the EMCVT. The EMCVT can be equipped on the conventional vehicle being regarded as the CVT and it also can be equipped on the hybrid electric vehicle（HEV） as the multi-energy sources assembly. The power flows of these two kinds of applications are analysed. The back electromotive force（EMF） equations are illatively studied and so the dynamic mathematic model is theorized. In order to certify the feasibility of the above theories, three simulations are carried out in allusion to the above two kinds of mentioned applications of the EMCVT and a five speed automatic transmission（AT） vehicle. The simulation results illustrate that the efficiency of the EMCVT vehicles is higher than that of the AT vehicle owed to the optimized operation area of the engine. Hence the fuel consumption of the EMCVT vehicles is knock-down.展开更多
Increase of sewage sludge(SS)has led to the construction of more incineration plants,exacerbating to the production of SS incineration residues.However,few studies have considered the mass balance of elements in large...Increase of sewage sludge(SS)has led to the construction of more incineration plants,exacerbating to the production of SS incineration residues.However,few studies have considered the mass balance of elements in large-scale SS incineration plants,affecting the residues treatment and utilization.In this study,flow analysis was conducted for major and trace elements in the SS,the fly ash(sewage sludge ash,SSA)and bottom ash from two large-scale SS incineration plants.The elemental characteristics were compared with those of coal fly ash(CFA),and air pollution control residues from municipal solid waste incineration(MSWIA),as well as related criteria.The results showed that the most abundant major element in SSA was Si,ranging from 120 to 240 g/kg,followed by Al(76–348 g/kg),Ca(26–113 g/kg),Fe(35–80 g/kg),and P(26–104 g/kg),and the trace elements were mainly Zn,Ba,Cu,and Mn.Not all the major elements were derived from SS.Most trace elements in the SS incineration residues accounted for 82.4%–127%of those from SS,indicating that SS was the main source of trace elements.The partitioning of heavy metals in the SS incineration residues showed that electrostatic precipitator ash or cyclone ash with high production rates were the major pollutant sinks.The differences in some major and trace elements could be indicators to differentiate SSA from CFA and MSWIA.Compared with related land criteria,the pollutants in SSA should not be ignored during disposal and utilization.展开更多
Several methods for analysis of dissolved total phosphorus in seawater were reviewed. Discussions were focused on UVirradiation and persulphate oxidation methods which are the most popular dissolved organic phosphorus...Several methods for analysis of dissolved total phosphorus in seawater were reviewed. Discussions were focused on UVirradiation and persulphate oxidation methods which are the most popular dissolved organic phosphorus determinationmethods presently. The compounds used for the phosphorus recovery test were categorized into three groups accordingto their chemical structure. It was found that low power UV irradiation can decompose POC or PC bonds efficientlybut may be inefficient for POP bonds. Heating-bath in acid condition is useful for decomposing POP bonds. Usingthe continuous flow analysis system (Auto-analyzer II), UV digestion and heating-bath, series experiments were carriedout based on the above analysis. Eleven model compounds were employed for the phosphorus recovery test and thefactors influencing the decomposition efficiency of dissolved compounds containing phosphorus were clarified. Finally,the optimal design for determination of dissolved total phosphorus in seawater based on the routine continuous flowanalysis system was presented. For the organic mono-phosphate, the recovery is more than 90% and a recovery of33%~51% was obtained for inorganic or organic polyphosphates. Up to now, this is the highest decompositionefficiency for dissolved phosphorus based on the continuous flow analysis system.展开更多
Base on the framework of material flow analsis （MFA） proposed by Eurostat, this paper collected related data and conducted a regional MFA for the Chengyang Districgt in Qingdao. The indicators such as Direct Materia...Base on the framework of material flow analsis （MFA） proposed by Eurostat, this paper collected related data and conducted a regional MFA for the Chengyang Districgt in Qingdao. The indicators such as Direct Material Input（DMI）, Direct Material Consumption （DMC） and Exports are calculated or estimated for the period of year 1995 through 2004. Several derivable iudicators defining direct material productivity and material intenstiy are also evaluated and some valuable conclusions were drawn. DMI in absolute number increased from about 1645.9 kilotons in 1995to about 8052.5 kilotons in 2004. Imports contribute to about 47 to 69% of DMI, and the biggest component of imports is fossil fuel that approximatley accounts far 50% of imnports. DMI per capita of Chengyang District increased rapidly and reached 17. 4 tons in 2004. Compared with other five economies studied by WRI, material consumption intensity of Chengyang District is significantly lower than developed countries, which indicates that Chengyang District is still in a development stage The direct material productivity （actual GDP per DMI） increased 59.1% from 1995 to 2004 and has been higher than either of stadies in China, which indicates efficiency of resources utilization has improved obviously in Chengyang District. But there was significant increase in material input in the last decade, which shows that rapid increase of economy is highly dependent on requirement and consumption of natural resources. Therefore, in order to promote the sustainahility, it is essential to develop circular economy and improve utilization efficiency of resources.展开更多
Research on carbon cycling has attracted attention from both scientists and policy-makers. Based on material flow analysis, this study systematically budgets the carbon inputs, outputs and balance from 1980 to 2013 fo...Research on carbon cycling has attracted attention from both scientists and policy-makers. Based on material flow analysis, this study systematically budgets the carbon inputs, outputs and balance from 1980 to 2013 for China＇s agro-ecosystem and its sub-systems, including agricultural land use, livestock breeding and rural life. The results show that from 1980 to 2013, both the carbon input and output were growing gradually, with the carbon input doubling from 1.6 Pg C/year in 1980 to 3.4 Pg C/year in 2013, while carbon output grew from 2.2 Pg C/year in 1980 to 3.8 Pg C/year in 2013. From 1980 to 2013, the crop production system in China has remained a carbon source, and the agricultural land uses were also almost all carbon sources instead of carbon sinks. As soil carbon stock plays a very important role in deciding the function of China＇s agro-ecosystem as a carbon sink or source, practices that can promote carbon storage and sequestration will be an essential component of low carbon agriculture development in China.展开更多
The advent of the COVID-19 pandemic has adversely affected the entire world and has put forth high demand for techniques that remotely manage crowd-related tasks.Video surveillance and crowd management using video ana...The advent of the COVID-19 pandemic has adversely affected the entire world and has put forth high demand for techniques that remotely manage crowd-related tasks.Video surveillance and crowd management using video analysis techniques have significantly impacted today’s research,and numerous applications have been developed in this domain.This research proposed an anomaly detection technique applied to Umrah videos in Kaaba during the COVID-19 pandemic through sparse crowd analysis.Managing theKaaba rituals is crucial since the crowd gathers from around the world and requires proper analysis during these days of the pandemic.The Umrah videos are analyzed,and a system is devised that can track and monitor the crowd flow in Kaaba.The crowd in these videos is sparse due to the pandemic,and we have developed a technique to track the maximum crowd flow and detect any object(person)moving in the direction unlikely of the major flow.We have detected abnormal movement by creating the histograms for the vertical and horizontal flows and applying thresholds to identify the non-majority flow.Our algorithm aims to analyze the crowd through video surveillance and timely detect any abnormal activity tomaintain a smooth crowd flowinKaaba during the pandemic.展开更多
The method ＂Material Flow Analysis （MFA）＂ is one of the effective tools to study law and quantification of material flow between economic system and ecological system. On the national level, economy-wide material ...The method ＂Material Flow Analysis （MFA）＂ is one of the effective tools to study law and quantification of material flow between economic system and ecological system. On the national level, economy-wide material flow analysis has been published for a number of countries. However, published studies on the regional or local level are still very limited and a standardized method does not exist yet. On the basis of framework of Material Flow Analysis proposed by Eurostat, the paper collected related data and analyzed material input and output for the Chengyang district in Qingdao. The results showed that DMI （Direct Material Input） and TMR （Total Material Requirement） in absolute number increased about 3.6 and 3.9 times, respectively from 1995 to 2004. Fossil fuel and mineral contributed to about 50.3%-76.3% of DMI. Imports of material increased about 5.0 times and became the most important Contributor to DMI, which showed that local economic growth was highly dependent on resources from other regions and countries. DPO （Domestic Processed Output） and TDO （Total Domestic Output） represent slow increasing trend, and DPO contributed to 22.2%-58.1% of TDO, suggesting local hidden flows were of obvious effect on TDO. The biggest component of DPO is CO2, approximately accounting for 90% of DPO. The material productivity increased 57.7% in last decade, reflecting improvement of efficiency of resources utilization in some extent. However, compared to developed countries and regions, material productivity of Chengyang district was relatively low. Therefore, in order to promote the sustainability, it is essential to develop circular economy and enhance materials productivity.展开更多
Material Flow Analysis(MFA) is a crucial instrument for sustainable development and creating industrial ecology system.MFA studies could balance and analyze the sources,flows,and consumes of specific materials or subs...Material Flow Analysis(MFA) is a crucial instrument for sustainable development and creating industrial ecology system.MFA studies could balance and analyze the sources,flows,and consumes of specific materials or substances.The results of MFA studies could support the strategies or decisions making for energy, resource,and waste management,especially achieving sustainable resource management.At CSC,the dynamic simulating software,STELLA,is used to develop a MFA model for scenario analysis.CSC also uses the freeware STAN 2.0 as a tool for visualizing and simulating material flows and stocks.Case studies of greenhouse gases MFA for integrated steel works are conducted.The results showed that the carbon content of hot-metal is an important hidden flow for balance analysis,and the different GHG emission scenarios and mitigation action scenarios are assessed.In addition,the Iron-making GHG I/O MFA Model,based on worldsteel Global Steel Sector Approach(GSSA),is developed for calculating the CO_2 and energy intensity of coke making,sintering,and BF processes.This MFA model was used to analyze the CO_2 reduction potential for iron-making process.The cases conducted for MFA applications at CSC were such as greenhouse gas,zinc,etc.In the future,CSC is going to develop a 'CSC Environment Management and Decision Supporting System' which combine MFA,LCA(life cycle assessment),and environment risk assessment.This supporting system expects to promoting energy efficiency and best resource use,supporting environment policymaking,creating environmental information value,etc.展开更多
In automobile engines,it is commonly known that the proper removal of the excess heat,resulting from internal combustion,is of high significance in the prevention of numerous negative consequences.In this regard,the r...In automobile engines,it is commonly known that the proper removal of the excess heat,resulting from internal combustion,is of high significance in the prevention of numerous negative consequences.In this regard,the radiator has a pivotal role as the main component of the engine’s cooling system.Hence,its design and analysis are highly important,requiring more comprehensive failure and flow investigations.In this work,a Scania radiator is examined under the thermal and mechanical loads,followed by its analysis under the combined thermomechanical loading.Then,the flow characteristics,including the velocity,pressure,and enthalpy,are studied.In this regard,PTC-Creo software is utilized.The results demonstrate that thermal stress causes seven times more displacement than a mechanical one.When they are combined,this value reaches 1.5 mm.Also,the maximum failure index value of the Tresca theory is around 4.58,observed at the inlet side of the radiator.Besides,this paper indicates that the PTC-Creo can be considered a reliable and economical tool for the simulation of industrial applications,such as the considered radiator of a heavy-duty cooling system.展开更多
New designs and adaptation methods are experimented to ensure compliance to ever increasing emissions and efficiency requirements of modern diesel engines. Piston head structure which influences the mixing rate and ti...New designs and adaptation methods are experimented to ensure compliance to ever increasing emissions and efficiency requirements of modern diesel engines. Piston head structure which influences the mixing rate and timing of the fuel within in the combustion chamber is known to enable increase in combustion efficiency and thus lower emission rates. In this paper, computation analysis of flow within a diesel engine cylinder with a twin swirl combustion chamber design throughout a full cycle is presented. The results obtained indicate that the effect of the twin swirl combustion chamber on the cold flow conditions is noteworthy and further analysis together with experiments may reveal information that may prove to be useful in further new designs.展开更多
Materials and energy are transferred between natural and industrial systems, providing a standard that can be used to deduce the interactions between these systems, An examination of these flows is an essen- tial part...Materials and energy are transferred between natural and industrial systems, providing a standard that can be used to deduce the interactions between these systems, An examination of these flows is an essen- tial part of the conversation on how industry impacts the environment, We propose that biological sys- tems, which embody sustainability, provide methods and principles that can lead to more useful ways to organize industrial activity, Transposing these biological methods to steel manufacturing is manifested through an efficient use of available materials, waste reduction, and decreased energy demand with cur- rently available technology, In this paper, we use ecological metrics to examine the change in structure and flows of materials in the Chinese steel industry over time by means of a systems-based mass flow analysis, Utilizing available data, the results of our analysis indicate that the Chinese steel manufacturing industry has increased its efficiency and sustainable use of resources over time at the unit process level, However, the appropriate organization of the steel production ecosystem remains a work in progress, Our results suggest that through the intelligent placement of cooperative industries, which can utilize the waste generated from steel manufacturing, the future of the Chinese steel industry can better reflect ecosystem maturity and health while minimizing waste.展开更多
Fluid flow analysis, such as gas flow analysis, water flow analysis, etc., is a fundamental problem in integrated energy systems (IES). Datasets are significant for researchers to test their proposed models and algori...Fluid flow analysis, such as gas flow analysis, water flow analysis, etc., is a fundamental problem in integrated energy systems (IES). Datasets are significant for researchers to test their proposed models and algorithms for fluid flow analysis. In this paper, we provide multiple benchmark datasets of fluid systems with detailed topology and operation information, such as data of fluid supply, fluid demand, pipes, valves, compressors/pumps, physical operation limits, etc. The provided benchmark datasets have synthetic and practical fluid systems of different scales, including gas systems with numbers of nodes ranging from 11 to 4197 and water systems with numbers of nodes ranging from 7 to 1894. Then, the data format of the datasets is described. Finally, fluid flow results on different benchmark systems under several typical scenarios are analyzed.展开更多
The occurrence of geogenic arsenic(As)in groundwater is a global public health concern.However,there remain large gaps in groundwater As data,making it difficult to identify non-compliant domestic wells,partly due to ...The occurrence of geogenic arsenic(As)in groundwater is a global public health concern.However,there remain large gaps in groundwater As data,making it difficult to identify non-compliant domestic wells,partly due to lack of low-cost methods capable of rapid As analysis.Therefore,the development of high through-put and reliable on-site determination methods for inorganic As is essential.Herein,a portable automated analyzer was developed for the determination of arsenite(As(Ⅲ)),arsenate(As(Ⅴ))and phosphate in As contaminated groundwater based on a previously adapted method for molybdenum blue spectrophotometry.After the optimization of the chemical reactions and flow manifold,the system demonstrated a high sample through-put(4.8/h for As(Ⅲ),As(Ⅴ)and phosphate analysis),allowing this system to screen 125 samples in 24 h.Other advantages include low operational costs(0.3 CNY per sample),appropriate sensitivity for contaminated groundwater(detection limits of 4.7μg/L,8.3μg/L and 5.4μg/L for As(Ⅲ),As(Ⅴ)and phosphate,respectively),good linearity(R^(2)>0.9996 at As concentrations up to 1600μg/L)and high precision(relative standard deviations of 3.5% and 2.8% for As(Ⅲ)and As(Ⅴ),respectively).The portable system was successfully used for As speciation analysis in 5 groundwater samples collected from multi-level wells at Yinchuan Plain,northwestern China,with total As concentrations ranging from 75.7 to 295.0μg/L,independently assessing As speciation,providing a promising novel method for the rapid on-site screening of As in tens of millions of domestic wells worldwide.展开更多
基金supported by the National Natural Science Foundation of China(Nos.71671187,71874210,71633006)the Natural Science Foundation of Hunan Province,China(No.2024JJ6539)+1 种基金the National Social Science Fund of China(No.22&ZD098)the Social Sciences Fund of Hunan Province,China(No.24YBQ138)。
文摘From a life cycle perspective,the material flow analysis is utilized to investigate the lithium material flows in international trade from 2000 to 2019.The results reveal that at the global level,the total volume of lithium trade grew rapidly,reaching 121116 t in 2019.Lithium trade was dominated by lithium minerals,lithium carbonate and lithium hydroxide rather than final lithium products,indicating an immaturity in global lithium industry.At the intercontinental level,Asia’s import trade and Oceania’s export trade led the world,accounting for 81.22%and 39.68%,respectively.At the national level,China,Japan and Korea became the main importers,while Chile and Australia were the main exporters.In addition,China’s trade volume far exceeded that of the United States.China’s exports were dominated by lithium-ion batteries,while the United States mainly imported lithium-ion batteries,proving that the development of China’s lithium industry was relatively faster.
基金The China Scholarship Council finances this research (Grant number CSC202010220001)。
文摘Wood,an essential natural resource in human civilization,remains widely used despite advances in technology and material substitution.The surge in greenhouse gas emissions and environmental concerns accentuates the need for optimizing wood utilization.Material flow analysis is a powerful tool for tracking material flows and stocks,aiding resource management and environmental decision-making.However,the full extent of its methodological dimensions,particularly within the context of the wood supply chain,remains relatively unexplored.In this study,we delve into the existing literature on wood flow analysis,discussing its primary objectives,materials involved,temporal and spatial scales,data sources,units,and conversion factors.Additionally,data uncertainty,data reconciliation and crucial assumptions in material flow analysis are highlighted in this paper.Key findings reveal the significance of wood cascading and substitution effects by replacing non-wood materials,where they can reduce greenhouse gas emissions more than the natural carbon sink of forests and wood products.The immediate impact of short-term wood cascading might not be as robust as the substitution effect,with energy substitution showcasing better results than material substitution.However,it's crucial to note that these conclusions could experience significant reversal from a long-term and global perspective.Strategies for improving wood efficiency involve maximizing material use,advancing construction technologies,extending product lifespans,promoting cascade use,and optimizing energy recovery processes.The study underscores the need for standardized approaches in wood flow analysis and emphasizes the potential of wood efficiency strategies in addressing environmental challenges.
基金Item Sponsored by National Natural Science Foundation of China(50334020)
文摘Sulfur flow for new generation steel manufacturing process is analyzed by the method of material flow analysis, and measures for SO2 emission reduction are put forward as assessment and target intervention of the results. The results of sulfur flow analysis indicate that 90 % of sulfur comes from fuels. Sulfur finally discharges from the steel manufacturing route in various steps, and the main point is BF and BOF slag desulfurization. In sintering process, the sulfur is removed by gasification, and sintering process is the main source of SO2 emission. The sulfur content of coke oven gas （COG） is an important factor affecting SO2 emission. Therefore, SO2 emission reduction should be started from the optimization and integration of steel manufacturing route, sulfur burden should be reduced through energy saving and consumption reduction, and the sulfur content of fuel should be controlled. At the same time, BF and BOF slag desulfurization should be optimized further and coke oven gas and sintering exhausted gas desulfurization should be adopted for SO2 emission reduction and reuse of resource, to achieve harmonic coordination of economic, social, and environmental effects for sustainable development.
文摘That flow is the common feature of substance flow and fluid flow is the viewpoint emphasized in the paper. Some notes on fluid mechanics, including the two approaches of fluid flow description, were given. The concepts of the chain and the chain group of product life cycles, which are essential for understanding the specific features of substance flow, were advanced. Taking the specific feature of substance flow into consideration, on the analogy of the two approaches in fluid mechanics, two approaches of substance flow analysis, i.e. L method and E model, were formulated. Illustrative models of steady and unsteady substance flow were sketched by both methods, and comparison between them was made in general.
基金financial supports from the National Key R&D Program of China(No.2019YFC1907400)the National Natural Science Foundation of China(Nos.51904351,51620105013)。
文摘The metabolism of copper and arsenic in a copper pyrometallurgy process was studied through substance flow analysis method.The mass balance accounts and substance flow charts of copper and arsenic were established,indicators including direct recovery,waste recycle ratio,and resource efficiency were used to evaluate the metabolism efficiency of the system.The results showed that,the resource efficiency of copper was 97.58%,the direct recovery of copper in smelting,converting,and refining processes was 91.96%,97.13%and 99.47%,respectively.Meanwhile,for producing 1 t of copper,10 kg of arsenic was carried into the system,with the generation of 1.07 kg of arsenic in flotation tailing,8.50 kg of arsenic in arsenic waste residue,and 0.05 kg of arsenic in waste water.The distribution and transformation behaviors of arsenic in the smelting,converting,and refining processes were also analyzed,and some recommendations for improving copper resource efficiency and pollution control were proposed based on substance flow analysis.
基金supported by National Natural Science Foundation of China(No.50605020)Guangdong Provincial Science and Technology Project of China(No.2006A10501001).
文摘With the structure of two air gaps and two rotors, the electromagnetic continuously variable transmission（EMCVT） is a novel power-split continuously variable transmission（CVT）. There are two kinds of power flowing through the EMCVT, one is mechanical power and the other is electric power. In the mean time, there are three power ports in the EMCVT, one is the outer rotor named mechanical power port and the other two are the inner rotor and the stator named electric power ports. The mechanical power port is connected to the driving wheels through the final gear and the electric ports are connected to the batteries through the transducers. The two kinds of power are coupled on the outer rotor of the EMCVT. The EMCVT can be equipped on the conventional vehicle being regarded as the CVT and it also can be equipped on the hybrid electric vehicle（HEV） as the multi-energy sources assembly. The power flows of these two kinds of applications are analysed. The back electromotive force（EMF） equations are illatively studied and so the dynamic mathematic model is theorized. In order to certify the feasibility of the above theories, three simulations are carried out in allusion to the above two kinds of mentioned applications of the EMCVT and a five speed automatic transmission（AT） vehicle. The simulation results illustrate that the efficiency of the EMCVT vehicles is higher than that of the AT vehicle owed to the optimized operation area of the engine. Hence the fuel consumption of the EMCVT vehicles is knock-down.
基金supported by the Major Science and Technology Program for Water Pollution Control and Treatment(No.2017ZX07202005)National Natural Science Foundation of China(No.21577102)。
文摘Increase of sewage sludge(SS)has led to the construction of more incineration plants,exacerbating to the production of SS incineration residues.However,few studies have considered the mass balance of elements in large-scale SS incineration plants,affecting the residues treatment and utilization.In this study,flow analysis was conducted for major and trace elements in the SS,the fly ash(sewage sludge ash,SSA)and bottom ash from two large-scale SS incineration plants.The elemental characteristics were compared with those of coal fly ash(CFA),and air pollution control residues from municipal solid waste incineration(MSWIA),as well as related criteria.The results showed that the most abundant major element in SSA was Si,ranging from 120 to 240 g/kg,followed by Al(76–348 g/kg),Ca(26–113 g/kg),Fe(35–80 g/kg),and P(26–104 g/kg),and the trace elements were mainly Zn,Ba,Cu,and Mn.Not all the major elements were derived from SS.Most trace elements in the SS incineration residues accounted for 82.4%–127%of those from SS,indicating that SS was the main source of trace elements.The partitioning of heavy metals in the SS incineration residues showed that electrostatic precipitator ash or cyclone ash with high production rates were the major pollutant sinks.The differences in some major and trace elements could be indicators to differentiate SSA from CFA and MSWIA.Compared with related land criteria,the pollutants in SSA should not be ignored during disposal and utilization.
基金The research was supported by the National Basic Research Program(“973”Program)of China under contract No.2002CB412405the Key Science and Technology Plan of the Ministry of Education of China under contract No.[2000]156-00079the Joint Sino-German Project under contract No.03F0189A.
文摘Several methods for analysis of dissolved total phosphorus in seawater were reviewed. Discussions were focused on UVirradiation and persulphate oxidation methods which are the most popular dissolved organic phosphorus determinationmethods presently. The compounds used for the phosphorus recovery test were categorized into three groups accordingto their chemical structure. It was found that low power UV irradiation can decompose POC or PC bonds efficientlybut may be inefficient for POP bonds. Heating-bath in acid condition is useful for decomposing POP bonds. Usingthe continuous flow analysis system (Auto-analyzer II), UV digestion and heating-bath, series experiments were carriedout based on the above analysis. Eleven model compounds were employed for the phosphorus recovery test and thefactors influencing the decomposition efficiency of dissolved compounds containing phosphorus were clarified. Finally,the optimal design for determination of dissolved total phosphorus in seawater based on the routine continuous flowanalysis system was presented. For the organic mono-phosphate, the recovery is more than 90% and a recovery of33%~51% was obtained for inorganic or organic polyphosphates. Up to now, this is the highest decompositionefficiency for dissolved phosphorus based on the continuous flow analysis system.
文摘Base on the framework of material flow analsis （MFA） proposed by Eurostat, this paper collected related data and conducted a regional MFA for the Chengyang Districgt in Qingdao. The indicators such as Direct Material Input（DMI）, Direct Material Consumption （DMC） and Exports are calculated or estimated for the period of year 1995 through 2004. Several derivable iudicators defining direct material productivity and material intenstiy are also evaluated and some valuable conclusions were drawn. DMI in absolute number increased from about 1645.9 kilotons in 1995to about 8052.5 kilotons in 2004. Imports contribute to about 47 to 69% of DMI, and the biggest component of imports is fossil fuel that approximatley accounts far 50% of imnports. DMI per capita of Chengyang District increased rapidly and reached 17. 4 tons in 2004. Compared with other five economies studied by WRI, material consumption intensity of Chengyang District is significantly lower than developed countries, which indicates that Chengyang District is still in a development stage The direct material productivity （actual GDP per DMI） increased 59.1% from 1995 to 2004 and has been higher than either of stadies in China, which indicates efficiency of resources utilization has improved obviously in Chengyang District. But there was significant increase in material input in the last decade, which shows that rapid increase of economy is highly dependent on requirement and consumption of natural resources. Therefore, in order to promote the sustainahility, it is essential to develop circular economy and improve utilization efficiency of resources.
基金supported by the National Science & Technology Pillar Program during the 12th Five-year Plan Period (No. 2013BAD11B03)the National Natural Science Foundation of China (Nos. 71573260,71273153,and 71525007)the Basic Scientific Research Fund (No. BSRF201311) for National Nonprofit Institutes from Ministry of Agriculture(MoA),China
文摘Research on carbon cycling has attracted attention from both scientists and policy-makers. Based on material flow analysis, this study systematically budgets the carbon inputs, outputs and balance from 1980 to 2013 for China＇s agro-ecosystem and its sub-systems, including agricultural land use, livestock breeding and rural life. The results show that from 1980 to 2013, both the carbon input and output were growing gradually, with the carbon input doubling from 1.6 Pg C/year in 1980 to 3.4 Pg C/year in 2013, while carbon output grew from 2.2 Pg C/year in 1980 to 3.8 Pg C/year in 2013. From 1980 to 2013, the crop production system in China has remained a carbon source, and the agricultural land uses were also almost all carbon sources instead of carbon sinks. As soil carbon stock plays a very important role in deciding the function of China＇s agro-ecosystem as a carbon sink or source, practices that can promote carbon storage and sequestration will be an essential component of low carbon agriculture development in China.
基金The authors extend their appreciation to the Deputyship for Research and Innovation,Ministry of Education in Saudi Arabia for funding this research work through the Project Number QURDO001Project title:Intelligent Real-Time Crowd Monitoring System Using Unmanned Aerial Vehicle(UAV)Video and Global Positioning Systems(GPS)Data。
文摘The advent of the COVID-19 pandemic has adversely affected the entire world and has put forth high demand for techniques that remotely manage crowd-related tasks.Video surveillance and crowd management using video analysis techniques have significantly impacted today’s research,and numerous applications have been developed in this domain.This research proposed an anomaly detection technique applied to Umrah videos in Kaaba during the COVID-19 pandemic through sparse crowd analysis.Managing theKaaba rituals is crucial since the crowd gathers from around the world and requires proper analysis during these days of the pandemic.The Umrah videos are analyzed,and a system is devised that can track and monitor the crowd flow in Kaaba.The crowd in these videos is sparse due to the pandemic,and we have developed a technique to track the maximum crowd flow and detect any object(person)moving in the direction unlikely of the major flow.We have detected abnormal movement by creating the histograms for the vertical and horizontal flows and applying thresholds to identify the non-majority flow.Our algorithm aims to analyze the crowd through video surveillance and timely detect any abnormal activity tomaintain a smooth crowd flowinKaaba during the pandemic.
基金Qingdao Agricultural University Research Fund (630707)
文摘The method ＂Material Flow Analysis （MFA）＂ is one of the effective tools to study law and quantification of material flow between economic system and ecological system. On the national level, economy-wide material flow analysis has been published for a number of countries. However, published studies on the regional or local level are still very limited and a standardized method does not exist yet. On the basis of framework of Material Flow Analysis proposed by Eurostat, the paper collected related data and analyzed material input and output for the Chengyang district in Qingdao. The results showed that DMI （Direct Material Input） and TMR （Total Material Requirement） in absolute number increased about 3.6 and 3.9 times, respectively from 1995 to 2004. Fossil fuel and mineral contributed to about 50.3%-76.3% of DMI. Imports of material increased about 5.0 times and became the most important Contributor to DMI, which showed that local economic growth was highly dependent on resources from other regions and countries. DPO （Domestic Processed Output） and TDO （Total Domestic Output） represent slow increasing trend, and DPO contributed to 22.2%-58.1% of TDO, suggesting local hidden flows were of obvious effect on TDO. The biggest component of DPO is CO2, approximately accounting for 90% of DPO. The material productivity increased 57.7% in last decade, reflecting improvement of efficiency of resources utilization in some extent. However, compared to developed countries and regions, material productivity of Chengyang district was relatively low. Therefore, in order to promote the sustainability, it is essential to develop circular economy and enhance materials productivity.
文摘Material Flow Analysis(MFA) is a crucial instrument for sustainable development and creating industrial ecology system.MFA studies could balance and analyze the sources,flows,and consumes of specific materials or substances.The results of MFA studies could support the strategies or decisions making for energy, resource,and waste management,especially achieving sustainable resource management.At CSC,the dynamic simulating software,STELLA,is used to develop a MFA model for scenario analysis.CSC also uses the freeware STAN 2.0 as a tool for visualizing and simulating material flows and stocks.Case studies of greenhouse gases MFA for integrated steel works are conducted.The results showed that the carbon content of hot-metal is an important hidden flow for balance analysis,and the different GHG emission scenarios and mitigation action scenarios are assessed.In addition,the Iron-making GHG I/O MFA Model,based on worldsteel Global Steel Sector Approach(GSSA),is developed for calculating the CO_2 and energy intensity of coke making,sintering,and BF processes.This MFA model was used to analyze the CO_2 reduction potential for iron-making process.The cases conducted for MFA applications at CSC were such as greenhouse gas,zinc,etc.In the future,CSC is going to develop a 'CSC Environment Management and Decision Supporting System' which combine MFA,LCA(life cycle assessment),and environment risk assessment.This supporting system expects to promoting energy efficiency and best resource use,supporting environment policymaking,creating environmental information value,etc.
文摘In automobile engines,it is commonly known that the proper removal of the excess heat,resulting from internal combustion,is of high significance in the prevention of numerous negative consequences.In this regard,the radiator has a pivotal role as the main component of the engine’s cooling system.Hence,its design and analysis are highly important,requiring more comprehensive failure and flow investigations.In this work,a Scania radiator is examined under the thermal and mechanical loads,followed by its analysis under the combined thermomechanical loading.Then,the flow characteristics,including the velocity,pressure,and enthalpy,are studied.In this regard,PTC-Creo software is utilized.The results demonstrate that thermal stress causes seven times more displacement than a mechanical one.When they are combined,this value reaches 1.5 mm.Also,the maximum failure index value of the Tresca theory is around 4.58,observed at the inlet side of the radiator.Besides,this paper indicates that the PTC-Creo can be considered a reliable and economical tool for the simulation of industrial applications,such as the considered radiator of a heavy-duty cooling system.
文摘New designs and adaptation methods are experimented to ensure compliance to ever increasing emissions and efficiency requirements of modern diesel engines. Piston head structure which influences the mixing rate and timing of the fuel within in the combustion chamber is known to enable increase in combustion efficiency and thus lower emission rates. In this paper, computation analysis of flow within a diesel engine cylinder with a twin swirl combustion chamber design throughout a full cycle is presented. The results obtained indicate that the effect of the twin swirl combustion chamber on the cold flow conditions is noteworthy and further analysis together with experiments may reveal information that may prove to be useful in further new designs.
基金supported by the National Science Foundation (CBET-1510531 and EFMA-1441208)
文摘Materials and energy are transferred between natural and industrial systems, providing a standard that can be used to deduce the interactions between these systems, An examination of these flows is an essen- tial part of the conversation on how industry impacts the environment, We propose that biological sys- tems, which embody sustainability, provide methods and principles that can lead to more useful ways to organize industrial activity, Transposing these biological methods to steel manufacturing is manifested through an efficient use of available materials, waste reduction, and decreased energy demand with cur- rently available technology, In this paper, we use ecological metrics to examine the change in structure and flows of materials in the Chinese steel industry over time by means of a systems-based mass flow analysis, Utilizing available data, the results of our analysis indicate that the Chinese steel manufacturing industry has increased its efficiency and sustainable use of resources over time at the unit process level, However, the appropriate organization of the steel production ecosystem remains a work in progress, Our results suggest that through the intelligent placement of cooperative industries, which can utilize the waste generated from steel manufacturing, the future of the Chinese steel industry can better reflect ecosystem maturity and health while minimizing waste.
基金supported by the Science and Technology Project of State Grid Corporation of China(5400-202199524A-O-5-ZN).
文摘Fluid flow analysis, such as gas flow analysis, water flow analysis, etc., is a fundamental problem in integrated energy systems (IES). Datasets are significant for researchers to test their proposed models and algorithms for fluid flow analysis. In this paper, we provide multiple benchmark datasets of fluid systems with detailed topology and operation information, such as data of fluid supply, fluid demand, pipes, valves, compressors/pumps, physical operation limits, etc. The provided benchmark datasets have synthetic and practical fluid systems of different scales, including gas systems with numbers of nodes ranging from 11 to 4197 and water systems with numbers of nodes ranging from 7 to 1894. Then, the data format of the datasets is described. Finally, fluid flow results on different benchmark systems under several typical scenarios are analyzed.
基金supported by the Natural Science Foundation of Fujian Province(No.2020J06008)for Distinguished Young Scholarsthe Fujian Provincial Central Guided Local Science and Technology Development Special Project(No.2022L3078).
文摘The occurrence of geogenic arsenic(As)in groundwater is a global public health concern.However,there remain large gaps in groundwater As data,making it difficult to identify non-compliant domestic wells,partly due to lack of low-cost methods capable of rapid As analysis.Therefore,the development of high through-put and reliable on-site determination methods for inorganic As is essential.Herein,a portable automated analyzer was developed for the determination of arsenite(As(Ⅲ)),arsenate(As(Ⅴ))and phosphate in As contaminated groundwater based on a previously adapted method for molybdenum blue spectrophotometry.After the optimization of the chemical reactions and flow manifold,the system demonstrated a high sample through-put(4.8/h for As(Ⅲ),As(Ⅴ)and phosphate analysis),allowing this system to screen 125 samples in 24 h.Other advantages include low operational costs(0.3 CNY per sample),appropriate sensitivity for contaminated groundwater(detection limits of 4.7μg/L,8.3μg/L and 5.4μg/L for As(Ⅲ),As(Ⅴ)and phosphate,respectively),good linearity(R^(2)>0.9996 at As concentrations up to 1600μg/L)and high precision(relative standard deviations of 3.5% and 2.8% for As(Ⅲ)and As(Ⅴ),respectively).The portable system was successfully used for As speciation analysis in 5 groundwater samples collected from multi-level wells at Yinchuan Plain,northwestern China,with total As concentrations ranging from 75.7 to 295.0μg/L,independently assessing As speciation,providing a promising novel method for the rapid on-site screening of As in tens of millions of domestic wells worldwide.
