Inexpensive flocculant-modified iron tailings sand(ITS)were converted into effective flocculation materials for cyanobacteria blooms.After composite modification with polyaluminum chloride(PAC)and polyacrylamide(PAM),...Inexpensive flocculant-modified iron tailings sand(ITS)were converted into effective flocculation materials for cyanobacteria blooms.After composite modification with polyaluminum chloride(PAC)and polyacrylamide(PAM),the surface charge of ITS was altered from negative to positive,and surface adhesion was increased by~1.5 times.PAC/PAM-modified ITS(PP-ITS)had strong flocculating effects on cyanobacteria,facilitating their removal.When the dosage of PP-ITS was 150 mg/L and the ratio of flocculant to ITS was 1:20,the elimination rate of cyanobacteria was as high as 90%.The flocs formed were better than those with chitosan-modified clays(CS-CA)and PAC-modified ITS(PAC-ITS)in terms of settling velocity,size,and recovery ability.The positively charged groups in the flocculant,such as-NH_(2) and Al^(3+),are attracted to negatively charged ions on the surface of ITS,altering the surface charge.Additionally,hydrogen bonds could form between amide side groups,and surface adhesion was improved through molecular association.Coupled with the strong bridging and sweeping effects of the flocculant,the flocs generated by PP-ITS formed rapidly and were large and resilient.The use of PP-ITS could effectively treat cyanobacteria blooms as well as solve the problem of ore tailings disposal.These results are of practical importance for engineering strategies to control cyanobacteria blooms,though there are still some issues that need to be addressed,such as how cyanobacteria flocs are collected and utilized after settling.展开更多
The flocculation behavior of carbon black (CB)-filled isoprene rubber (IR) nanocomposites was systematically investigated under both dynamic and static conditions to unravel the distinct mechanisms governing filler ne...The flocculation behavior of carbon black (CB)-filled isoprene rubber (IR) nanocomposites was systematically investigated under both dynamic and static conditions to unravel the distinct mechanisms governing filler network evolution.Under dynamic conditions,small oscillatory shear strains (0.1%) significantly enhanced filler particle motion,leading to pronounced agglomeration and a flocculation degree of about 4.3MPa at 145℃.In contrast,static flocculation exhibited a fundamentally different mechanism dominated by polymer chain dynamics,which is driven mainly by thermal activation.Radial distribution function (RDF) analysis of transmission electron microscopy (TEM) images revealed a slight decrease (2 nm) in the interparticle distance peak after static annealing at 100℃ for 7 h,indicating localized motion of CB particles.However,the overall filler network remained stable,with no significant agglomeration observed.The increase in bound rubber content from about 23% to 28% with rising temperature further confirmed the dominant role of polymer chain adsorption and interfacial reinforcement in static flocculation.These findings highlight the critical influence of external strain on filler network formation and provide new insights into the polymer-dominated mechanism of static flocculation.The results offer practical guidance for optimizing the storage and processing of rubber nanocomposites,particularly in applications where static flocculation during prolonged storage is a concern.展开更多
The clay mineral flocculation encapsulation poses a major technical challenge in the field of fine mineral separation.Enhancing the ability to separate clay minerals from target mineral surfaces is key to addressing t...The clay mineral flocculation encapsulation poses a major technical challenge in the field of fine mineral separation.Enhancing the ability to separate clay minerals from target mineral surfaces is key to addressing this issue.In the flotation process of ultrafine hematite,sodium polyacrylate(PAAS)was used as a selective flocculant for hematite,polyaluminum chloride(PAC)as a flocculant for kaolinite and chlorite,and sodium oleate(NaOL)as the collector to achieve asynchronous flocculation flotation.This study examines the flotation separation performance and validates it through experiments on actual mineral samples.The results indicate that with PAAS and PAC dosages of 1.25 and 50 mg·L^(-1),respectively,the iron grade and recovery of the actual mineral samples increased by 9.39%and 7.97%.Through Zeta potential,XPS analysis,infrared spectroscopy,and total organic carbon(TOC)testing,the study reveals the microscopic interaction mechanisms of different flocculants with minerals,providing insights for the clean and efficient utilization of ultrafine mineral resources.展开更多
A series of novel chitosan-based magnetic flocculants FS@CTS-P(AM-DMC)was prepared by molecular structure control.The characterization results showed that FS@CTS-P(AM-DMC)had a uniform size of about 21.46 nm,featuring...A series of novel chitosan-based magnetic flocculants FS@CTS-P(AM-DMC)was prepared by molecular structure control.The characterization results showed that FS@CTS-P(AM-DMC)had a uniform size of about 21.46 nm,featuring a typical core-shell structure,and the average coating layer thickness of CTS-P(AM-DMC)was about 5.03 nm.FS@CTS-P(AM-DMC)exhibited excellent flocculation performance for kaolin suspension,achieved 92.54% turbidity removal efficiency under dosage of 150 mg/L,pH 7.0,even at high turbidity(2000 NTU)with a removal efficiency of 96.96%.The flocculation mechanism was revealed to be dominated by charge neutralization under acidic and neutral conditions,while adsorption and bridging effects play an important role in alkaline environments.The properties of magnetic aggregates during flocculation,breakage,and regeneration were studied at different pH levels and dosages.In the process of magnetophoretic,magnetic particles collide and adsorb with kaolin particles continuously due to magnetic and electrostatic attraction,transform into magnetic chain clusters,and then further form three-dimensional network magnetic aggregates that can capture free kaolin particles and other chain clusters.Particle image velocimetry confirmed the formation of eddy current of magnetic flocs and experienced three stages:acceleration,stabilization,and deceleration.展开更多
Particle size is an important characteristic of suspended matter,and it contains crucial information about the deposition process.Suspended particle samples in the water mixing zone of the Changjiang River Estuary wer...Particle size is an important characteristic of suspended matter,and it contains crucial information about the deposition process.Suspended particle samples in the water mixing zone of the Changjiang River Estuary were collected in December 2016.Untreated original grain size and the decentralized grain size of the suspended particles were measured via a laser particle size analyzer.Morphological characteristics and the chemical composition of the suspended particles were also studied systematically using a scanning electron microscope(SEM)with an energy dispersive X-ray spectrometer(EDS).Then,the flocculation and sedimentation of suspended matter in the water mixing zone were explored by combining them with the water mixing processes in the estuary.The average particle size of suspended matter in the mixing zone of the Changjiang River Estuary ranges fromФ5.73 toФ7.98.The particle size distribution pattern is an abnormal model with a mainly unimodal pattern.In the freshwater area that was dominated by runoff,the suspended matter is mainly composed of fine particles,the settling velocity is slow,and the flocculation is weak.Floc particles were often seen in the mixing zone,with the flocs having a relatively large particle size,a low density and a loose structure appearing at the weak mixing zone;the flocs had a compacted structure in most areas of the mixing zone.The changes of suspended particle size in the estuarine mixing zone promote the settling and deposition of suspended matter,which has an important influence on the bed geomorphology and preservation of the fine suspended particles in the estuary.展开更多
Effects of stirring speed and time, pH and sodium oleate concentration on the shear hydrophobic flocculation of ultrafine Anshan hematite with sodium oleate as the surfactant were discussed. The results show that thes...Effects of stirring speed and time, pH and sodium oleate concentration on the shear hydrophobic flocculation of ultrafine Anshan hematite with sodium oleate as the surfactant were discussed. The results show that these parameters significantly affect the shear hydrophobic flocculation of ultrafine hematite. The optimum conditions for the flocculation are： stirring speed 1 400 r/min, flocculation time 20 min, pH 9 and sodium oleate concentration 3.94×10-4 mol/L; the flotation recovery of hematite flocs is remarkably high compared with non flocculated ultrafine hematite. According to the extended DLVO theory, the total interaction potential of Anshan ultrafine hematite was determined. The calculation results indicate that the hydrophobic flocculation state of the ultrafine hematite-sodium oleate system is mainly dominated by electric double layer repulsive interaction potential and hydrophobic interaction potential. A mechanical agitation is required to impart particles a kinetic energy to overcome potential barrier between them due to the existence of electric double layer repulsive interaction potential. Those particles further approach to form flocs due to the significant increase of the hydrophobic interaction potential.展开更多
In order to accelerate the sedimentation of super-large-scale argillized ultrafine tailings with bad features such as low settling velocity, muddy overflow water, and large flocculant dosage, a fly-ash-based magnetic ...In order to accelerate the sedimentation of super-large-scale argillized ultrafine tailings with bad features such as low settling velocity, muddy overflow water, and large flocculant dosage, a fly-ash-based magnetic coagulant （FAMC） was used in a dynamic experimental device. To obtain the best possible combination of the impact factors （magnetic intensity, FAMC dosage, flocculant dosage, and feed speed） for minimum overflow turbidity, a response surface methodology test coupled with a four-factor five-level central composite design was conducted. The synergy mechanism of FAMC and flocculant was analyzed based on the potential measurement and scanning electron microscopy. The results show that the flocculant dosage, overflow turbidity, and solid content can be reduced by 50%, 90%, and 80%, while the handling capacity per unit and efficiency of backfill and dry stacking can be promoted by 20%, 17%, and 13%, respectively, with a magnetic intensity of 0.3 T, FAMC dosage of 200 mL/t, flocculant dosage of 30 g/t, and feed speed of 0.6 t/（m^2·h）. Therefore, synergy of FAMC and flocculant has obvious efficiency in saving energy and protecting the environment by allowing 70×10^6 t/a of argillized ultrafine tailings slurry to be disposed safely and efficiently with a cost saving of more than 53×106 Yuan/a, which gives it great promise for use in domestic and foreign mines.展开更多
基金Supported by the National Key Research and Development Program of China(No.2022 YFC 3202700)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX 24_0904)。
文摘Inexpensive flocculant-modified iron tailings sand(ITS)were converted into effective flocculation materials for cyanobacteria blooms.After composite modification with polyaluminum chloride(PAC)and polyacrylamide(PAM),the surface charge of ITS was altered from negative to positive,and surface adhesion was increased by~1.5 times.PAC/PAM-modified ITS(PP-ITS)had strong flocculating effects on cyanobacteria,facilitating their removal.When the dosage of PP-ITS was 150 mg/L and the ratio of flocculant to ITS was 1:20,the elimination rate of cyanobacteria was as high as 90%.The flocs formed were better than those with chitosan-modified clays(CS-CA)and PAC-modified ITS(PAC-ITS)in terms of settling velocity,size,and recovery ability.The positively charged groups in the flocculant,such as-NH_(2) and Al^(3+),are attracted to negatively charged ions on the surface of ITS,altering the surface charge.Additionally,hydrogen bonds could form between amide side groups,and surface adhesion was improved through molecular association.Coupled with the strong bridging and sweeping effects of the flocculant,the flocs generated by PP-ITS formed rapidly and were large and resilient.The use of PP-ITS could effectively treat cyanobacteria blooms as well as solve the problem of ore tailings disposal.These results are of practical importance for engineering strategies to control cyanobacteria blooms,though there are still some issues that need to be addressed,such as how cyanobacteria flocs are collected and utilized after settling.
基金supported by the National Natural Science Foundation of China(No.52293471)National Key R&D Program of China(No.2022YFB3707303).
文摘The flocculation behavior of carbon black (CB)-filled isoprene rubber (IR) nanocomposites was systematically investigated under both dynamic and static conditions to unravel the distinct mechanisms governing filler network evolution.Under dynamic conditions,small oscillatory shear strains (0.1%) significantly enhanced filler particle motion,leading to pronounced agglomeration and a flocculation degree of about 4.3MPa at 145℃.In contrast,static flocculation exhibited a fundamentally different mechanism dominated by polymer chain dynamics,which is driven mainly by thermal activation.Radial distribution function (RDF) analysis of transmission electron microscopy (TEM) images revealed a slight decrease (2 nm) in the interparticle distance peak after static annealing at 100℃ for 7 h,indicating localized motion of CB particles.However,the overall filler network remained stable,with no significant agglomeration observed.The increase in bound rubber content from about 23% to 28% with rising temperature further confirmed the dominant role of polymer chain adsorption and interfacial reinforcement in static flocculation.These findings highlight the critical influence of external strain on filler network formation and provide new insights into the polymer-dominated mechanism of static flocculation.The results offer practical guidance for optimizing the storage and processing of rubber nanocomposites,particularly in applications where static flocculation during prolonged storage is a concern.
基金funded by the National Natural Science Foundation of China(No.52374265)the Central Guided Local Science and Technology Development Funding Program(No.236Z4106G)+1 种基金the Natural Science Foundation of Hebei Province(No.E2022209108)Key Projects of Hebei Provincial Department of Education(No.ZD2022059)。
文摘The clay mineral flocculation encapsulation poses a major technical challenge in the field of fine mineral separation.Enhancing the ability to separate clay minerals from target mineral surfaces is key to addressing this issue.In the flotation process of ultrafine hematite,sodium polyacrylate(PAAS)was used as a selective flocculant for hematite,polyaluminum chloride(PAC)as a flocculant for kaolinite and chlorite,and sodium oleate(NaOL)as the collector to achieve asynchronous flocculation flotation.This study examines the flotation separation performance and validates it through experiments on actual mineral samples.The results indicate that with PAAS and PAC dosages of 1.25 and 50 mg·L^(-1),respectively,the iron grade and recovery of the actual mineral samples increased by 9.39%and 7.97%.Through Zeta potential,XPS analysis,infrared spectroscopy,and total organic carbon(TOC)testing,the study reveals the microscopic interaction mechanisms of different flocculants with minerals,providing insights for the clean and efficient utilization of ultrafine mineral resources.
基金supported by the National Natural Science Foundation of China(No.51672028)the Fundamental Research Funds for the Central Universities(Nos.2015ZCQ-HJ-02 and 2015PY-08)。
文摘A series of novel chitosan-based magnetic flocculants FS@CTS-P(AM-DMC)was prepared by molecular structure control.The characterization results showed that FS@CTS-P(AM-DMC)had a uniform size of about 21.46 nm,featuring a typical core-shell structure,and the average coating layer thickness of CTS-P(AM-DMC)was about 5.03 nm.FS@CTS-P(AM-DMC)exhibited excellent flocculation performance for kaolin suspension,achieved 92.54% turbidity removal efficiency under dosage of 150 mg/L,pH 7.0,even at high turbidity(2000 NTU)with a removal efficiency of 96.96%.The flocculation mechanism was revealed to be dominated by charge neutralization under acidic and neutral conditions,while adsorption and bridging effects play an important role in alkaline environments.The properties of magnetic aggregates during flocculation,breakage,and regeneration were studied at different pH levels and dosages.In the process of magnetophoretic,magnetic particles collide and adsorb with kaolin particles continuously due to magnetic and electrostatic attraction,transform into magnetic chain clusters,and then further form three-dimensional network magnetic aggregates that can capture free kaolin particles and other chain clusters.Particle image velocimetry confirmed the formation of eddy current of magnetic flocs and experienced three stages:acceleration,stabilization,and deceleration.
基金The National Natural Science Foundation of China under contract No.42176077。
文摘Particle size is an important characteristic of suspended matter,and it contains crucial information about the deposition process.Suspended particle samples in the water mixing zone of the Changjiang River Estuary were collected in December 2016.Untreated original grain size and the decentralized grain size of the suspended particles were measured via a laser particle size analyzer.Morphological characteristics and the chemical composition of the suspended particles were also studied systematically using a scanning electron microscope(SEM)with an energy dispersive X-ray spectrometer(EDS).Then,the flocculation and sedimentation of suspended matter in the water mixing zone were explored by combining them with the water mixing processes in the estuary.The average particle size of suspended matter in the mixing zone of the Changjiang River Estuary ranges fromФ5.73 toФ7.98.The particle size distribution pattern is an abnormal model with a mainly unimodal pattern.In the freshwater area that was dominated by runoff,the suspended matter is mainly composed of fine particles,the settling velocity is slow,and the flocculation is weak.Floc particles were often seen in the mixing zone,with the flocs having a relatively large particle size,a low density and a loose structure appearing at the weak mixing zone;the flocs had a compacted structure in most areas of the mixing zone.The changes of suspended particle size in the estuarine mixing zone promote the settling and deposition of suspended matter,which has an important influence on the bed geomorphology and preservation of the fine suspended particles in the estuary.
基金Project (20062026) supported by Natural Science Foundation of Liaoning Province, China
文摘Effects of stirring speed and time, pH and sodium oleate concentration on the shear hydrophobic flocculation of ultrafine Anshan hematite with sodium oleate as the surfactant were discussed. The results show that these parameters significantly affect the shear hydrophobic flocculation of ultrafine hematite. The optimum conditions for the flocculation are： stirring speed 1 400 r/min, flocculation time 20 min, pH 9 and sodium oleate concentration 3.94×10-4 mol/L; the flotation recovery of hematite flocs is remarkably high compared with non flocculated ultrafine hematite. According to the extended DLVO theory, the total interaction potential of Anshan ultrafine hematite was determined. The calculation results indicate that the hydrophobic flocculation state of the ultrafine hematite-sodium oleate system is mainly dominated by electric double layer repulsive interaction potential and hydrophobic interaction potential. A mechanical agitation is required to impart particles a kinetic energy to overcome potential barrier between them due to the existence of electric double layer repulsive interaction potential. Those particles further approach to form flocs due to the significant increase of the hydrophobic interaction potential.
基金Project(2012BAC09B02)supported by the 12th-Five Years Key Programs for Science and Technology Development of ChinaProject(2015zzts078)supported by the Fundamental Research Funds for the Central Universities of Central South University,ChinaProject(2015CX005)supported by Innovation Driven Plan of Central South University,China
文摘In order to accelerate the sedimentation of super-large-scale argillized ultrafine tailings with bad features such as low settling velocity, muddy overflow water, and large flocculant dosage, a fly-ash-based magnetic coagulant （FAMC） was used in a dynamic experimental device. To obtain the best possible combination of the impact factors （magnetic intensity, FAMC dosage, flocculant dosage, and feed speed） for minimum overflow turbidity, a response surface methodology test coupled with a four-factor five-level central composite design was conducted. The synergy mechanism of FAMC and flocculant was analyzed based on the potential measurement and scanning electron microscopy. The results show that the flocculant dosage, overflow turbidity, and solid content can be reduced by 50%, 90%, and 80%, while the handling capacity per unit and efficiency of backfill and dry stacking can be promoted by 20%, 17%, and 13%, respectively, with a magnetic intensity of 0.3 T, FAMC dosage of 200 mL/t, flocculant dosage of 30 g/t, and feed speed of 0.6 t/（m^2·h）. Therefore, synergy of FAMC and flocculant has obvious efficiency in saving energy and protecting the environment by allowing 70×10^6 t/a of argillized ultrafine tailings slurry to be disposed safely and efficiently with a cost saving of more than 53×106 Yuan/a, which gives it great promise for use in domestic and foreign mines.
