Floating platform system has been extensively used in ocean exploitation, particularly for a tension-leg platform （TLP） system in deep water. Most of the TLPs are multi-mooring systems, where multi-joints are connec...Floating platform system has been extensively used in ocean exploitation, particularly for a tension-leg platform （TLP） system in deep water. Most of the TLPs are multi-mooring systems, where multi-joints are connected to the tension-legs so that the platform is not allowed to twist freely and may subject to enormous force induced by large incident waves in the weak-direction of the structure. This study aims to exploit a single moored offshore platform system that may attract less force and can be operated with less effort. In our analysis, in addition to mechanical properties of the tether, two important properties are also taken into consideration for the single mooring tether with expanded cross sectional dimension and utilization of stronger material, namely, the sag-extensibility and the flexural rigidity. Finally, the dynamic structural behavior produced by the mechanical effects on the new system is investigated and compared with that of traditional design while the wave-structure interactions of large body are also accounted for. Our study finds that the neglect of sag-extensibility or the flexural rigidity of large, strong mooring cable may result in a conservative but not necessarily safe design.展开更多
In this study,the flexural rigidity of a honeycomb consisting of regular hexagonal cells is investigated.It is found that the honeycomb bending can not be evaluated by using the equivalent elastic moduli obtained from...In this study,the flexural rigidity of a honeycomb consisting of regular hexagonal cells is investigated.It is found that the honeycomb bending can not be evaluated by using the equivalent elastic moduli obtained from the in-plane deformation because the moments acting on the inclined cell wall are different for in-plane deformation and bending deformation.Based on the fact that the inclined wall is twisted under the condition of the rotation angle in both connection edges being zero,a theoretical technique for calculating the flexural rigidity of honeycombs is proposed,and the validity of the present analysis is demonstrated by numerical results obtained by BFM.展开更多
Extensive research has shown that externally bonded carbon fiber reinforced polymer （CFRP） laminates are particularly suitable for improving the fatigue behavior of reinforced concrete （RC） beams. This paper prese...Extensive research has shown that externally bonded carbon fiber reinforced polymer （CFRP） laminates are particularly suitable for improving the fatigue behavior of reinforced concrete （RC） beams. This paper presents the research on flexural ngidity evolvement laws by testing 14 simple-supported RC beams strengthened with carbon fiber laminates （CFL） under cyclic load, and 2 under monotone load as a reference. The cyclic load tests revealed the peak load applied onto the surface of a supported RC beam strengthened with CFL is linear to the logarithm of its fatigue life, and the flexural rigidity evolvement undergoes three distinct phases： a rapid decrease from the start to about 5% of the fatigue life; an even development from .5% to about 99% of the fatigue life; and a succedent rapid decrease to failure. When the ratio of fatigue ＂cycles to the fatigue life is within 0.0.5 to 0.99, the flexural rigidity varies linearly with the ratio. The peak load does not affect the flexural rigidity evolvement if it is not high enough to make the main reinforcements yield. The dependences of the flexural rigidity of specimens formed in the same group upon their fatigue cycles normalized by fatigue life are almost coincident. This implies the flexural rigidity may be a material parameter independent of the stress level. These relationships of flexural rigidity to fatigue cycles, and fatigue life may be able to provide some hints for fatigue design and fatigue life evaluation of RC member strengthened with CFL; nevertheless the findings still need verifying by more experiments.展开更多
In order to figure out the cable flexural rigidity influence on suspension bridges,a contrast model experiment is made:a chain cable model with no flexural rigidity and a wire cable model with some flexural rigidity.A...In order to figure out the cable flexural rigidity influence on suspension bridges,a contrast model experiment is made:a chain cable model with no flexural rigidity and a wire cable model with some flexural rigidity.And then,four finite element models of a same long-span suspension bridge with different cable element are set up to be analyzed.Both experimental and numerical simulation results show that,with the increase of the span and the decrease of sag-span ratio,the influence of the cable flexural rigidity is significant.The difference of nodes displacement reaches more than 10 cm in construction analysis,which will bring some trouble to the construction.And the difference of the maximum section edge normal stress may reach 15%,which may have an adverse impact onto the bridge.Therefore,considering the cable flexural rigidity is necessary on some analysis of suspension bridges.展开更多
Analytical solutions for the flexural-gravity wave resistances due to a line source steadily moving on the surface of an infinitely deep fluid are investigated within the framework of the linear po- tential theory. Th...Analytical solutions for the flexural-gravity wave resistances due to a line source steadily moving on the surface of an infinitely deep fluid are investigated within the framework of the linear po- tential theory. The homogenous fluid, covered by a thin elastic plate, is assumed to be incompressible and inviscid, and the motion to be irrotational. The solution in integral form for the wave resistance is obtained by means of the Fourier transform and the explicitly analytical solutions are derived with the aid of the residue theorem. The dispersion relation shows that there is a minimal phase speed cmin, a threshold for the existence of the wave resistance. No wave is generated when the moving speed of the source V is less than emin while the wave resistances firstly increase to their peak values and then decrease when V ~〉 Crnin. The effects of the flexural rigidity and the inertia of the plate are studied. @ 2013 The Chinese Society of Theoretical and Applied Mechanics. [doi：10.1063/2.1302202]展开更多
基金financially supported by the Science Council of Taiwan (Grant No. NSC-97-2221-E-110-080)
文摘Floating platform system has been extensively used in ocean exploitation, particularly for a tension-leg platform （TLP） system in deep water. Most of the TLPs are multi-mooring systems, where multi-joints are connected to the tension-legs so that the platform is not allowed to twist freely and may subject to enormous force induced by large incident waves in the weak-direction of the structure. This study aims to exploit a single moored offshore platform system that may attract less force and can be operated with less effort. In our analysis, in addition to mechanical properties of the tether, two important properties are also taken into consideration for the single mooring tether with expanded cross sectional dimension and utilization of stronger material, namely, the sag-extensibility and the flexural rigidity. Finally, the dynamic structural behavior produced by the mechanical effects on the new system is investigated and compared with that of traditional design while the wave-structure interactions of large body are also accounted for. Our study finds that the neglect of sag-extensibility or the flexural rigidity of large, strong mooring cable may result in a conservative but not necessarily safe design.
文摘In this study,the flexural rigidity of a honeycomb consisting of regular hexagonal cells is investigated.It is found that the honeycomb bending can not be evaluated by using the equivalent elastic moduli obtained from the in-plane deformation because the moments acting on the inclined cell wall are different for in-plane deformation and bending deformation.Based on the fact that the inclined wall is twisted under the condition of the rotation angle in both connection edges being zero,a theoretical technique for calculating the flexural rigidity of honeycombs is proposed,and the validity of the present analysis is demonstrated by numerical results obtained by BFM.
基金National Natural Science Foundation of China (No.10272047)the Natural Science Foundation of Guangdong Province (No.020856)
文摘Extensive research has shown that externally bonded carbon fiber reinforced polymer （CFRP） laminates are particularly suitable for improving the fatigue behavior of reinforced concrete （RC） beams. This paper presents the research on flexural ngidity evolvement laws by testing 14 simple-supported RC beams strengthened with carbon fiber laminates （CFL） under cyclic load, and 2 under monotone load as a reference. The cyclic load tests revealed the peak load applied onto the surface of a supported RC beam strengthened with CFL is linear to the logarithm of its fatigue life, and the flexural rigidity evolvement undergoes three distinct phases： a rapid decrease from the start to about 5% of the fatigue life; an even development from .5% to about 99% of the fatigue life; and a succedent rapid decrease to failure. When the ratio of fatigue ＂cycles to the fatigue life is within 0.0.5 to 0.99, the flexural rigidity varies linearly with the ratio. The peak load does not affect the flexural rigidity evolvement if it is not high enough to make the main reinforcements yield. The dependences of the flexural rigidity of specimens formed in the same group upon their fatigue cycles normalized by fatigue life are almost coincident. This implies the flexural rigidity may be a material parameter independent of the stress level. These relationships of flexural rigidity to fatigue cycles, and fatigue life may be able to provide some hints for fatigue design and fatigue life evaluation of RC member strengthened with CFL; nevertheless the findings still need verifying by more experiments.
基金Sponsored by Major Research Plan of the National Natural Science Foundation of China (Grant No.90715021)
文摘In order to figure out the cable flexural rigidity influence on suspension bridges,a contrast model experiment is made:a chain cable model with no flexural rigidity and a wire cable model with some flexural rigidity.And then,four finite element models of a same long-span suspension bridge with different cable element are set up to be analyzed.Both experimental and numerical simulation results show that,with the increase of the span and the decrease of sag-span ratio,the influence of the cable flexural rigidity is significant.The difference of nodes displacement reaches more than 10 cm in construction analysis,which will bring some trouble to the construction.And the difference of the maximum section edge normal stress may reach 15%,which may have an adverse impact onto the bridge.Therefore,considering the cable flexural rigidity is necessary on some analysis of suspension bridges.
基金supported by the National Natural Science Foundation of China (11072140)the State Key Laboratory of Ocean Engineering (Shanghai Jiao Tong University) (0803)The Shanghai Program for Innovative Research Team in Universities
文摘Analytical solutions for the flexural-gravity wave resistances due to a line source steadily moving on the surface of an infinitely deep fluid are investigated within the framework of the linear po- tential theory. The homogenous fluid, covered by a thin elastic plate, is assumed to be incompressible and inviscid, and the motion to be irrotational. The solution in integral form for the wave resistance is obtained by means of the Fourier transform and the explicitly analytical solutions are derived with the aid of the residue theorem. The dispersion relation shows that there is a minimal phase speed cmin, a threshold for the existence of the wave resistance. No wave is generated when the moving speed of the source V is less than emin while the wave resistances firstly increase to their peak values and then decrease when V ~〉 Crnin. The effects of the flexural rigidity and the inertia of the plate are studied. @ 2013 The Chinese Society of Theoretical and Applied Mechanics. [doi：10.1063/2.1302202]
