In this study,the flexural rigidity of a honeycomb consisting of regular hexagonal cells is investigated.It is found that the honeycomb bending can not be evaluated by using the equivalent elastic moduli obtained from...In this study,the flexural rigidity of a honeycomb consisting of regular hexagonal cells is investigated.It is found that the honeycomb bending can not be evaluated by using the equivalent elastic moduli obtained from the in-plane deformation because the moments acting on the inclined cell wall are different for in-plane deformation and bending deformation.Based on the fact that the inclined wall is twisted under the condition of the rotation angle in both connection edges being zero,a theoretical technique for calculating the flexural rigidity of honeycombs is proposed,and the validity of the present analysis is demonstrated by numerical results obtained by BFM.展开更多
The plate flexure and normal faulting characteristics along the Tonga, Japan, Izu-Bonin and Mariana Trenches are investigated by combining observations and modeling of elastoplastic deformation of the subducting plate...The plate flexure and normal faulting characteristics along the Tonga, Japan, Izu-Bonin and Mariana Trenches are investigated by combining observations and modeling of elastoplastic deformation of the subducting plate. The observed average trench relief is found to be the smallest at the Japan Trench(3 km) and the largest at the Mariana Trench(4.9 km), and the average fault throw is the smallest at the Japan Trench(113 m) and the largest at the Tonga Trench(284 m). A subducting plate is modeled to bend and generate normal faults subjected to three types of tectonic loading at the trench axis: vertical loading, bending moment, and horizontal tensional force. It is inverted for the solutions of tectonic loading that best fit the observed plate flexure and normal faulting characteristics of the four trenches. The results reveal that a horizontal tensional force(HTF) for the Japan Trench is 33%, 50% and 60% smaller than those of the Mariana, Tonga and Izu-Bonin Trenches, respectively. The normal faults are modeled to penetrate to a maximum depth of 29, 23, 32 and 32 km below the sea floor for the Tonga,Japan, Izu-Bonin and Mariana Trenches, respectively, which is consistent with the depths of relocated normal faulting earthquakes in the Japan and Izu-Bonin Trenches. Moreover, it is argued that the calculated horizontal tensional force is generally positively correlated with the observed mean fault throw, while the integrated area of the reduction in the effective elastic thickness is correlated with the trench relief. These results imply that the HTF plays a key role in controlling the normal faulting pattern and that plate weakening can lead to significant increase in the trench relief.展开更多
The oxidation tests of Ti_3AlC_2 were conducted at 1100 and 1200？C in air for 48 and 360 h, respectively,and the effects of high temperature oxidation on the flexural strength and hardness of Ti_3AlC_2 were investiga...The oxidation tests of Ti_3AlC_2 were conducted at 1100 and 1200？C in air for 48 and 360 h, respectively,and the effects of high temperature oxidation on the flexural strength and hardness of Ti_3AlC_2 were investigated. The microstructure, grain size and phase compositions of Ti_3AlC_2 substrate didn＇t change after oxidation, hence the oxide removed Ti_3AlC_2 substrate maintained its initial flexural strength and hardness. However, the flexural strength of oxide retained Ti_3AlC_2 decreased by about 5%. Acoustic emission monitoring indicated that during the process of three-point bending test, the formed Al_2O_3 scale on Ti_3AlC_2 surface fractured firstly in a cleavage manner, then the substrate/oxide interface cracked,and finally the Ti_3AlC_2 substrate fractured. The mechanical degradation was caused by the preferential formation of cracks in brittle Al_2O_3 scale as well as at defective and lacunose grain boundaries of the substrate where stress concentration generated. The mechanical degradation was insensitive to oxidation temperature and time in the present conditions. In addition, the surface hardness increased significantly after oxidation due to the formed hard Al_2O_3 scale on the surface of Ti_3AlC_2 substrate.展开更多
文摘In this study,the flexural rigidity of a honeycomb consisting of regular hexagonal cells is investigated.It is found that the honeycomb bending can not be evaluated by using the equivalent elastic moduli obtained from the in-plane deformation because the moments acting on the inclined cell wall are different for in-plane deformation and bending deformation.Based on the fact that the inclined wall is twisted under the condition of the rotation angle in both connection edges being zero,a theoretical technique for calculating the flexural rigidity of honeycombs is proposed,and the validity of the present analysis is demonstrated by numerical results obtained by BFM.
基金The National Natural Science Foundation of China under contract Nos 41706056,91628301 and U1606401the Program of Chinese Academy of Sciences under contract Nos Y4SL021001,QYZDY-SSW-DQC005,YZ201325 and YZ201534+1 种基金the Natural Science Foundation of Guangdong Province of China under contract No.2017A030310066the China Ocean Mineral Resources R&D Association under contract No.DY135-S2-1-04
文摘The plate flexure and normal faulting characteristics along the Tonga, Japan, Izu-Bonin and Mariana Trenches are investigated by combining observations and modeling of elastoplastic deformation of the subducting plate. The observed average trench relief is found to be the smallest at the Japan Trench(3 km) and the largest at the Mariana Trench(4.9 km), and the average fault throw is the smallest at the Japan Trench(113 m) and the largest at the Tonga Trench(284 m). A subducting plate is modeled to bend and generate normal faults subjected to three types of tectonic loading at the trench axis: vertical loading, bending moment, and horizontal tensional force. It is inverted for the solutions of tectonic loading that best fit the observed plate flexure and normal faulting characteristics of the four trenches. The results reveal that a horizontal tensional force(HTF) for the Japan Trench is 33%, 50% and 60% smaller than those of the Mariana, Tonga and Izu-Bonin Trenches, respectively. The normal faults are modeled to penetrate to a maximum depth of 29, 23, 32 and 32 km below the sea floor for the Tonga,Japan, Izu-Bonin and Mariana Trenches, respectively, which is consistent with the depths of relocated normal faulting earthquakes in the Japan and Izu-Bonin Trenches. Moreover, it is argued that the calculated horizontal tensional force is generally positively correlated with the observed mean fault throw, while the integrated area of the reduction in the effective elastic thickness is correlated with the trench relief. These results imply that the HTF plays a key role in controlling the normal faulting pattern and that plate weakening can lead to significant increase in the trench relief.
基金financial support of the project from the National Natural Science Foundation of China (Nos. 51571205 and 51271191)
文摘The oxidation tests of Ti_3AlC_2 were conducted at 1100 and 1200？C in air for 48 and 360 h, respectively,and the effects of high temperature oxidation on the flexural strength and hardness of Ti_3AlC_2 were investigated. The microstructure, grain size and phase compositions of Ti_3AlC_2 substrate didn＇t change after oxidation, hence the oxide removed Ti_3AlC_2 substrate maintained its initial flexural strength and hardness. However, the flexural strength of oxide retained Ti_3AlC_2 decreased by about 5%. Acoustic emission monitoring indicated that during the process of three-point bending test, the formed Al_2O_3 scale on Ti_3AlC_2 surface fractured firstly in a cleavage manner, then the substrate/oxide interface cracked,and finally the Ti_3AlC_2 substrate fractured. The mechanical degradation was caused by the preferential formation of cracks in brittle Al_2O_3 scale as well as at defective and lacunose grain boundaries of the substrate where stress concentration generated. The mechanical degradation was insensitive to oxidation temperature and time in the present conditions. In addition, the surface hardness increased significantly after oxidation due to the formed hard Al_2O_3 scale on the surface of Ti_3AlC_2 substrate.
