As an important component of tokamaks,the divertor is mainly responsible for extracting heat and helium ash,and the targets of the divertor need to withstand high heat flux of 10 MW m-2 for steady-state operation.In t...As an important component of tokamaks,the divertor is mainly responsible for extracting heat and helium ash,and the targets of the divertor need to withstand high heat flux of 10 MW m-2 for steady-state operation.In this study,we proposed a new strategy,using microchannel cooling technology to remove high heat load on the targets of the divertor.The results demonstrated that the microchannel-based W/Cu flat-type mock-up successfully withstood the thermal fatigue test of 1000 cycles at 10 MW m^(-2)with cooling water of 26 l min^(-1),30°C(inlet),0.8 MPa(inlet),15 s power on and 15 s dwell time;the maximum temperature on the heat-loaded surface(W surface)of the mock-up was 493°C,which is much lower than the recrystallization temperature of W(1200°C).Moreover,no occurrence of macrocrack and‘hot spot’at the W surface,as well as no detachment of W/Cu tiles were observed during the thermal fatigue testing.These results indicate that microchannel cooling technology is an efflcient method for removing the heat load of the divertor at a low flow rate.The present study offers a promising solution to replace the monoblock design for the EAST divertor.展开更多
In this work, we have selected three number of stepped type solar stills of the same overall dimensions 620 mm (W) × 808 mm (L) but with different absorber surface areas due to the variation in the shape of the b...In this work, we have selected three number of stepped type solar stills of the same overall dimensions 620 mm (W) × 808 mm (L) but with different absorber surface areas due to the variation in the shape of the basin surface. The other design parameters like depth of water, thickness of glass cover, insulation thickness, type of condensing cover, absorbing material provided over the basin, and angle of inclination of the still were kept constant to study the effect of shape of the absorber surface over the distillate yield obtained. The shape of the absorber surface provided in the basins of solar stills A, E and F was flat, convex and concave respectively. When the convex and concave type stepped solar stills are used, the average daily water production has been found to be 56.60% and 29.24% higher than that of flat type stepped solar still respectively. Also an economic analysis was made. The payback period of flat type, convex type and concave type stepped solar still is 823 days, 525 days and 637 days respectively. Thus, the convex type solar still gives the returns within the least possible time as compared to other two types of stepped solar stills. The laboratory tests were conducted to test the quality of water after distillation. The tests indicate that the quality of water in terms of pH, electrical conductivity, total hardness, TDS, Alkalinity, Nitrates etc. is well within the desirable limits as prescribed by WHO for Indian specific conditions.展开更多
基金financial support from the National MCF Energy R&D Program(No.2018YFE0312300)National Natural Science Foundation of China(No.51706100)+1 种基金the Natural Science Foundation of Jiangsu Province(No.BK20180477)Fundamental Research Funds for the Central Universities(No.30918011205)。
文摘As an important component of tokamaks,the divertor is mainly responsible for extracting heat and helium ash,and the targets of the divertor need to withstand high heat flux of 10 MW m-2 for steady-state operation.In this study,we proposed a new strategy,using microchannel cooling technology to remove high heat load on the targets of the divertor.The results demonstrated that the microchannel-based W/Cu flat-type mock-up successfully withstood the thermal fatigue test of 1000 cycles at 10 MW m^(-2)with cooling water of 26 l min^(-1),30°C(inlet),0.8 MPa(inlet),15 s power on and 15 s dwell time;the maximum temperature on the heat-loaded surface(W surface)of the mock-up was 493°C,which is much lower than the recrystallization temperature of W(1200°C).Moreover,no occurrence of macrocrack and‘hot spot’at the W surface,as well as no detachment of W/Cu tiles were observed during the thermal fatigue testing.These results indicate that microchannel cooling technology is an efflcient method for removing the heat load of the divertor at a low flow rate.The present study offers a promising solution to replace the monoblock design for the EAST divertor.
文摘In this work, we have selected three number of stepped type solar stills of the same overall dimensions 620 mm (W) × 808 mm (L) but with different absorber surface areas due to the variation in the shape of the basin surface. The other design parameters like depth of water, thickness of glass cover, insulation thickness, type of condensing cover, absorbing material provided over the basin, and angle of inclination of the still were kept constant to study the effect of shape of the absorber surface over the distillate yield obtained. The shape of the absorber surface provided in the basins of solar stills A, E and F was flat, convex and concave respectively. When the convex and concave type stepped solar stills are used, the average daily water production has been found to be 56.60% and 29.24% higher than that of flat type stepped solar still respectively. Also an economic analysis was made. The payback period of flat type, convex type and concave type stepped solar still is 823 days, 525 days and 637 days respectively. Thus, the convex type solar still gives the returns within the least possible time as compared to other two types of stepped solar stills. The laboratory tests were conducted to test the quality of water after distillation. The tests indicate that the quality of water in terms of pH, electrical conductivity, total hardness, TDS, Alkalinity, Nitrates etc. is well within the desirable limits as prescribed by WHO for Indian specific conditions.
